Triangle ABC is a right triangle. Point D is the midpoint of side AB, and point E is the midpoint of side AC. The measure of angle ADE is 68°.

Triangle ABC with segment DE. Angle ADE measures 68 degrees.

The following flowchart with missing statements and reasons proves that the measure of angle ECB is 22°:

Statement, Measure of angle ADE is 68 degrees, Reason, Given, and Statement, Measure of angle DAE is 90 degrees, Reason, Definition of right angle, leading to Statement 3 and Reason 2, which further leads to Statement, Measure of angle ECB is 22 degrees, Reason, Substitution Property. Statement, Segment DE joins the midpoints of segment AB and AC, Reason, Given, leading to Statement, Segment DE is parallel to segment BC, Reason, Midsegment theorem, which leads to Angle ECB is congruent to angle AED, Reason 1, which further leads to Statement, Measure of angle ECB is 22 degrees, Reason, Substitution Property.

Which statement and reason can be used to fill in the numbered blank spaces?


Corresponding angles are congruent
Triangle Sum Theorem
Measure of angle AED is 22°

Corresponding angles are congruent
Base Angle Theorem
Measure of angle AED is 68°

Alternate interior angles are congruent
Triangle Sum Theorem
Measure of angle AED is 22°

Alternate interior angles are congruent
Triangle Angle Sum Theorem
Measure of angle AED is 68°

The slope of the tangent line to the curve at the point (1, 2) is -3/5.

A line's slope is a number that describes its steepness and direction. It is calculated by dividing the vertical change by the horizontal change between any two points on a straight line.

To find the slope of the tangent line to the curve at the point (1, 2), we need to first find the derivative of the curve with respect to x and evaluate it at x = 1 and y = 2.

Taking the partial derivative of both sides of the equation with respect to x, we get:

3x² + 10xy + 5x² dy/dx + 4y - 4dy/dx = 0

Simplifying this expression and solving for dy/dx, we get:

dy/dx = (4 - 13x² - 10xy) / (10x + 5x²)

To find the slope of the tangent line at the point (1, 2), we substitute x = 1 and y = 2 into this expression:

dy/dx = (4 - 13(1)² - 10(1)(2)) / (10(1) + 5(1)²) = -3/5

Therefore, the slope of the tangent line to the curve at the point (1, 2) is -3/5.

Learn more about slope of line on:

https://brainly.com/question/16949303

#SPJ1

If fy (a,b) = f, (a,b) = 0, does it follow that f has a local maximum or local minimum at (a,b) then it does not follows that (a,b) is a critical point of f, and (a,b) is a candidate for a local maximum or local minimum. Therefore, the correct option is option A. No. It follows that (a,b) is a critical point of f, and (a,b) is a candidate for a local maximum or local minimum.

If fy (a,b) = f, (a,b) = 0, does it follow that f has a local maximum or local minimum at (a,b) then it does not follows that (a,b) is a critical point of f, and (a,b) is a candidate for a local maximum or local minimum.

This is because fy (a,b) = f, (a,b) = 0 indicates that the partial derivatives of f with respect to both a and b are zero at (a,b), which makes (a,b) a critical point of f. However, this does not guarantee that f has a local maximum or local minimum at (a,b), as further analysis is required to determine the nature of the critical point.

Just because both partial derivatives are zero does not guarantee that (a,b) is a local maximum or minimum. It could also be a saddle point or an inflection point. To determine whether it is a local maximum, local minimum, or neither, you would need to use the second partial derivative test or examine the nature of the function around the point (a,b).

Know more about critical point here:

https://brainly.com/question/29144288

#SPJ11

The value of x from the Intersecting chords that extend outside circle is 13

From the question, we have the following parameters that can be used in our computation:

Intersecting chords that extend outside circle

Using the theorem of intersecting chords, we have

8 * (3x - 2 + 8) = 12 * (x + 5 + 12)

This gives

8 * (3x + 6) = 12 * (x + 17)

Using a graphing tool, we have

x = 13

Hence, the value of x is 13

Read more about intersecting chords at

https://brainly.com/question/13950364

#SPJ1

The kind of geometric transformation shown by the line of music is: Reflection

A transformation is a mathematical manipulation that moves a geometric shape or function from one space to another.

Now, a set of image transformations where the geometry of image is changed without altering its actual pixel values are commonly referred to as “Geometric transformations"

Looking at the music note, we can see that the note didn't change in size but looks to be a mirror image of its' previous notes.

Since it is a mirror image, the obvious transformation will be a reflection

Read more about Geometric Transformation at: https://brainly.com/question/4289712

#SPJ1

a. P(W) = (9+101)/200 = 0.55

b. P(R) = (9+101)/200 = 0.55

c. P(MOR) = P(M and R) = 101/200 = 0.505

d. P(WUL) = P(W or L) = (9+9)/200 = 0.09

e. P(ML) = P(M and L) = 7/200 = 0.035

f. P(RW) = P(R and W) = 101/200 * 9/100 = 0.0909

a. With replacement:

P(left-handed man first and right-handed man second) = P(LM) * P(RM) = (7/200) * (9/200) = 0.001575

b. With replacement:

P(left-handed woman first and left-handed woman second) = P(LW) * P(LW) = (9/200) * (9/200) = 0.002025

c. Without replacement:

P(left-handed man first and right-handed man second) = P(LM) * P(RM|LM) = (7/200) * (9/199) = 0.001754

(Note that the probability of selecting a right-handed man given that a left-handed man was selected first is now 9/199 since there are only 199 people left in the sample to choose from for the second selection.)

d. Without replacement:

P(left-handed woman first and left-handed woman second) = P(LW) * P(LW|LW) = (9/200) * (8/199) = 0.001449

(Note that the probability of selecting a left-handed woman given that a left-handed woman was selected first is now 8/199 since there are only 199 people left in the sample to choose from for the second selection.)

a. P(EnF) = P(EU F) - P(E intersect F) = 0.7 - P(E complement union F complement) = 0.7 - P((E intersection F) complement) = 0.7 - P((E complement) union (F complement)) = 0.7 - (1 - P(E or F)) = 0.7 - 0.15 = 0.55

b. Events E and F are not mutually exclusive since P(E intersection F) > 0 (given by P(EU F) = 0.7). This means that it is possible for both events E and F to occur simultaneously.

c. Events E and F are not independent since P(E intersection F) = P(E) * P(F) (given that P(EU F) = P(E) + P(F) - P(E intersection F) = 0.7 and P(E) = 0.25, P(F) = 0.6). If two events are independent, then the probability of their intersection is equal to the product of their individual probabilities, which is not the case for events E and F.

Visit here to learn more about probabilities brainly.com/question/30034780

#SPJ11

The argument is valid. It follows the form of modus ponens where the first premise establishes a conditional statement "if p, then q", and the second premise affirms the antecedent "p". Therefore, the conclusion "q" logically follows. There is no fallacy present in this argument.

The given argument is as follows:
1. If he rides bikes (p), he will be in the race (q).
2. He rides bikes (p).
3. He will be in the race (q).

Let's determine if the argument is valid or a fallacy, and identify the form that applies.

In this case, the argument is valid and follows the form of Modus Ponens. Modus Ponens is a valid argument form that has the structure:

1. If p, then q.
2. p.
3. Therefore, q.

Here, since the argument follows this structure (If he rides bikes, he will be in the race; he rides bikes; therefore, he will be in the race), it is a valid argument and not a fallacy.

learn more on arguments at: https://brainly.com/question/25465770

#SPJ11

First, let's identify the coordinates of the vertices of rhombus WXYZ:
W(1,5), X(6,3), Y(1,1), and Z(4,3)

Now, we will perform a reflection over the x-axis. To do this, we simply need to negate the y-coordinate of each vertex while keeping the x-coordinate the same.

Step-by-step:

1. Reflect point W(1,5):
  The x-coordinate stays the same: 1
  Negate the y-coordinate: -5
  New coordinates for W': W'(1,-5)

2. Reflect point X(6,3):
  The x-coordinate stays the same: 6
  Negate the y-coordinate: -3
  New coordinates for X': X'(6,-3)

3. Reflect point Y(1,1):
  The x-coordinate stays the same: 1
  Negate the y-coordinate: -1
  New coordinates for Y': Y'(1,-1)

4. Reflect point Z(4,3):
  The x-coordinate stays the same: 4
  Negate the y-coordinate: -3
  New coordinates for Z': Z'(4,-3)

The coordinates of the image of rhombus WXYZ under the reflection in the x-axis are W'(1,-5), X'(6,-3), Y'(1,-1), and Z'(4,-3).

To learn more about “rhombus” refer to the https://brainly.com/question/20627264

#SPJ11

Answer:

£75 and £125

Step-by-step explanation:

To divide £200 in the ratio 3:5, you need to first find the total parts of the ratio, which is 3+5=8.

Then you can divide £200by 8 to find the value of each part of the ratio:

£200/8 =£25

So, each part of the ratio 3:5 is worth £25.

To find the share of each part of the ratio, you can multiply the value of each part by the corresponding ratio number:

The share of the first part (3) is £25*3=£75

The share pf the second part (5) is £25*5=£125

Therefore, the £200 is divided into the ratio of 3:5 as £75 for the first part and £125 for the second part.

By using the Concept of Permutations,There are 59,280 different ways to choose the president, vice president, and secretary from a class of 40 students.

To determine the number of different ways people can be chosen as president, vice president, and secretary from a class of 40 students:

You can use the concept of permutations.

Step 1: Choose the president. There are 40 students in the class, so there are 40 choices for the president position.

Step 2: Choose the vice president. Since the president has been chosen, there are now 39 remaining students to choose from for the vice president position.

Step 3: Choose the secretary. After selecting the president and vice president, there are 38 remaining students to choose from for the secretary position.

Now, multiply the number of choices for each position:

40 (president) x 39 (vice president) x 38 (secretary) = 59,280 different ways to choose the president, vice president, and secretary from a class of 40 students.

To know more about Concept of Permutations:

https://brainly.com/question/30649574

#SPJ11

Therefore, the general expression of the power series for f(x) is: ∑n=0[∞] cnxn = 3 - 6x + 27x² - 108x³ + ... , where cn = [tex]3(-1)^n (n+1)[/tex].

The function f(x)=3/(1+3x)² can be expressed as a power series using the formula for the geometric series:

f(x) = 3/[(1+3x)²]

= 3(1/(1+3x)²)

= 3[1 - 2(3x) + 3(3x)² - 4(3x)³ + ...]

where the second step follows from the formula for the geometric series with a first term of 1 and a common ratio of -3x, and the third step follows from differentiating the power series for 1/(1-x)².

Comparing the coefficients of [tex]x^n[/tex] on both sides of the equation, we have:

cn = [tex]3(-1)^n (n+1)[/tex].

Learn more about geometric series here:

https://brainly.com/question/12987084

#SPJ11

a). The R² of 0.9128 indicates that the model explains 91.28% of the variation in unemployment rates.

b) To find the average unemployment rate in the early fourth quarter period of 1966 with constant vacancy levels, set D = 0 in the regression equation: UN = 2.7491 - 1.5294V.

a. The regression results show that the unemployment rate (UN) is influenced by job vacancies (V), the time period (D), and their interaction (D.V.). T

he positive coefficient for D (1.1507) indicates a higher unemployment rate after 1966-IV due to policy changes, while the negative coefficients for V (-1.5294) and the interaction term (-0.8511) imply that a higher job vacancy rate reduces unemployment, with this effect being less pronounced after 1966-IV.

b. Then, plug in the vacancy rate (V) to calculate the average unemployment rate.

To know more about unemployment rates click on below link:

https://brainly.com/question/30115084#

#SPJ11

Given ;

9(0.2)n − 1 n = 1

The given geometric series is convergent.

Σ [from n=1 to infinity] 9(0.2)^(n-1)

To determine if a geometric series is convergent or divergent,

we need to look at the common ratio (r). In this case, r = 0.2.

A geometric series is convergent if the absolute value of the common ratio is less than 1 (|r| < 1) and divergent if the absolute value of the common ratio is greater than or equal to 1 (|r| >= 1).

Since |0.2| < 1, the given geometric series is convergent.

To know more about Convergent series:

https://brainly.com/question/15415793

#SPJ11

The market rate of substitution between good x and y is represented by the ratio of their prices, which is px/py. Therefore, in this case, the market rate of substitution is 20/5 = 4. However, this answer choice is not listed. The closest answer choice is b. -4, which is the negative inverse of the market rate of substitution (-1/4).
The market rate of substitution between good X and Y is represented by the marginal rate of substitution (MRS), which is the ratio of the marginal utilities of both goods. In this case, we are given income (I) = 500, the price of good X (Px) = 20, and the price of good Y (Py) = 5.

To find the MRS, we can use the formula:

MRS = - (Px / Py)

Plugging in the values, we get:

MRS = - (20 / 5)

MRS = -4

So, the market rate of substitution between good X and Y is -4 (option b).

Visit here to learn more about income brainly.com/question/17961582

#SPJ11

Taylor series for f(x) centered at c = -1 is: f(x) = -30 + 3(x+1). The correct expansion is: ∑n=0[infinity]5n+13n−7(x+1)n−7. The remainder term is zero for all n >= 1, and the Taylor series converges to f(x) for all x. Thus, the interval of validity is (-∞,∞).

What is reminder?

A remainder is what is left over after dividing one number by another. It is the amount by which a quantity is not divisible by another given quantity.

To find the Taylor series of f(x) centered at c = -1, we need to compute its derivatives:

f(x) = 3x - 27

f'(x) = 3

f''(x) = 0

f'''(x) = 0

f''''(x) = 0

...

Using the formula for the Taylor series, we get:

[tex]f(x) = f(-1) + f'(-1)(x+1) + (1/2!)f''(-1)(x+1)^2 + (1/3!)f'''(-1)(x+1)^3 + ...[/tex]

f(-1) = 3(-1) - 27 = -30

f'(-1) = 3

f''(-1) = 0

f'''(-1) = 0

...

Thus, the Taylor series for f(x) centered at c = -1 is:

f(x) = -30 + 3(x+1)

Simplifying, we get:

f(x) = 3x - 27

Therefore, the correct expansion is: ∑n=0[infinity]5n+13n−7(x+1)n−7

To find the interval on which this expansion is valid, we can use the formula for the remainder term in the Taylor series:

[tex]Rn(x) = f(n+1)(c)(x-c)^{(n+1)}/(n+1)![/tex]

Since f''(x) = 0 for all x, the remainder term simplifies to:

[tex]Rn(x) = f(n+1)(c)(x-c)^{(n+1)}/(n+1)![/tex]

Using c = -1, we have:

f(n+1)(c) = 0 for all n >= 1

Therefore, the remainder term is zero for all n >= 1, and the Taylor series converges to f(x) for all x. Thus, the interval of validity is (-∞,∞).

To learn more about reminder visit:

https://brainly.com/question/29347810

#SPJ1

The coefficient of determination (R2) is a measure of the proportion of variation in the dependent variable that is explained by the regression model, while the standard error of estimate (se) measures the accuracy of the predicted values.

What is line regression?

Linear regression is a statistical method used to model the relationship between a dependent variable (also called the response or target variable) and one or more independent variables (also called predictors or explanatory variables) in a linear fashion.

The coefficient of determination (R2) for Model 3 indicates that 61.63% of the sample variation in Earnings is explained by the regression model. This means that the predictor variables included in Model 3 are able to explain more than half of the variation in the dependent variable, Earnings.

The standard error of the estimate (se) is a measure of the average distance that the observed values fall from the regression line. A smaller standard error of estimate indicates that the observed values are closer to the fitted regression line.

The adjusted R2 in Model 1 and Model 2 can be interpreted as follows:

Model 1: 55.92% of the sample variation in Earnings is explained by the regression model, taking into account the number of predictor variables included in the model.

Model 2: 84.75% of the sample variation in Earnings is explained by the model selection, taking into account the number of predictor variables in each model.

Overall, the coefficient of determination (R2) is a measure of the proportion of variation in the dependent variable that is explained by the regression model, while the standard error of estimate (se) measures the accuracy of the predicted values. Adjusted R2 is a modification of R2 that takes into account the number of predictor variables included in the model and provides a more reliable measure of model fit.

To learn more about line regression from the given link:

https://brainly.com/question/7656407

#SPJ1

To construct a truth table, we need to list all possible combinations of truth values for the propositions N and A, and then evaluate the truth value of each compound proposition N (AVE) A (EVN) for each combination of truth values. Here is the truth table:

N A N (AVE) A (EVN)

T T          F

T F          T

F T          T

F F          F

In the truth table, T stands for true and F stands for false. The first column represents the truth value of proposition N, and the second column represents the truth value of proposition A. The third column represents the truth value of the compound proposition N (AVE) A (EVN).

To determine whether the pair of propositions are logically equivalent or contradictory, we can compare the truth values of the compound proposition for each row. We see that the compound proposition is true in rows 2 and 3, and false in rows 1 and 4. Therefore, the pair of propositions are not logically equivalent, and they are not contradictory.

To determine if the statements are consistent or inconsistent, we need to check if there is at least one row in which both propositions are true. We see that there are two rows (2 and 3) in which both propositions are true. Therefore, the statements are consistent.

to know more about propositions

brainly.com/question/14789062

#SPJ1

The absolute maximum value of f(x) = [tex]x^3[/tex] - 3x + 1 on the interval [0,3] is 19, which occurs at x = 3 and the absolute minimum value of f(x) =[tex]x^3[/tex] - 3x + 1 on the interval [0,3] is -1, which occurs at x = 1.

To find the absolute maximum and absolute minimum values of f(x) = [tex]x^3[/tex] - 3x + 1 on the interval [0,3], we need to first find the critical points of the function on this interval.
Taking the derivative of the function, we get:
f'(x) = [tex]3x^2[/tex] - 3
Setting this equal to zero and solving for x, we get:
[tex]x^2\\[/tex] - 1 = 0
(x - 1)(x + 1) = 0
So the critical points of the function on the interval [0,3] are x = 1 and x = -1.
Next, we evaluate the function at these critical points as well as at the endpoints of the interval:
f(0) = 1
f(1) = -1
f(3) = 19
f(-1) = 3
Thus, the absolute maximum value of the function on the interval [0,3] is 19, which occurs at x = 3, and the absolute minimum value of the function on the interval [0,3] is -1, which occurs at x = 1.
Therefore, we can summarize the answer as follows:
The absolute maximum value of f(x) = [tex]x^3[/tex] - 3x + 1 on the interval [0,3] is 19, which occurs at x = 3.
The absolute minimum value of f(x) = [tex]x^3[/tex] - 3x + 1 on the interval [0,3] is -1, which occurs at x = 1.

The complete question is:-

Find the absolute maximum and absolute minimum values of f on the given interval.f(x) =  [tex]x^3[/tex] - 3x + 1[0,3](min)(max)

To learn more about interval, refer:-

https://brainly.com/question/13708942

#SPJ11

False. The value of the sample mean is not static and can change with different data sets.

What is statistics?

Statistics is a branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of numerical data. It involves the use of methods and techniques to gather, summarize, and draw conclusions from data.

False.

The value of the sample mean is calculated based on the data in the sample, and it can change if the data set from which the sample is drawn changes.

For example, suppose we have a population with a certain mean and take a random sample from that population to calculate the sample mean. If we take a different sample from the same population, we may get a different sample mean. Similarly, if we take a sample from a different population with a different mean, we will get a different sample mean.

Therefore, the value of the sample mean is not static and can change with different data sets.

To learn more about statistics from the given link:

https://brainly.com/question/28053564

#SPJ1

The volume of the cone B using scale factor k = 3/2 is equal to 54π cubic centimeters.

Volume of cone A = 16π cubic centimeters

Scale factor 'k' = 3/2

Two solids A and B are similar.

This implies ,all corresponding lengths in solid B are 3/2 times the lengths in solid A.

The volume of a cone is given by the formula

V = (1/3)πr²h,

where r is the radius and h is the height.

Volume of cone A is 16π cubic centimeters.

Let r₁ and h₁ be the radius and height of cone A and r₂ and h₂ of cone B.

⇒16π = (1/3)π(r₁²)(h₁)

Multiplying both sides by 3 and dividing by π, we get,

⇒48 =(r₁²)(h₁)

Since solid A and B are similar with a scale factor of 3/2, we have,

h₂ = (3/2)h₁ and r₂= (3/2)r₁

Using these relationships, the volume of cone B is,

Volume of cone B = (1/3)π(r₂²)(h₂)

Volume of cone B = (1/3)π[(3/2)r₁]²[(3/2)h₁]

Volume of cone B = (1/3)π(9/4)(r₁²)(3/2)(h₁)

Volume of cone B = (27/8)(1/3)π(r₁²)(h₁)

Substituting Volume of cone A = 16π, we get,

Volume of cone B = (27/8)(16π)

Volume of cone B = 54π

Therefore, the volume of cone B is 54π cubic centimeters.

learn more about volume here

brainly.com/question/13543318

#SPJ1

An integer b that is not in the range of f, which contradicts the assumption that f is a one-to-one function from A to Z. So there is no infinite set A for which  |A| < |Z+ | = א 0.

Integers are a combination of zero, natural numbers, and their combination. It can be represented as a string, except for the fraction. This is denoted by Z.

Show that there is no infinite set A for which |A| of |Z| = א 0 (alpha zero), we must use Cantor's diagonal argument.

Suppose there exists an infinite set A such that |A| of |Z| = א 0. This means that there is a one-to-one function f between A-Z.

We can construct a new sequence (a1, a2, a3, ...), where ai is the ith number of base 10 of f(i) (with leading zeros if necessary). For example, if f(1) = 28, then a1 = 2 and a2 = 8.

Since there are only infinitely many digits in each number, the sequence (a1, a2, a3, ...) is a sequence of integers. We can construct a new integer b by taking the diagonal of this sequence and adding 1 to each number. For example, if the sequence is (2, 8), (3, 1), (7, 9), ..., the diagonal is 2, 1, 9 , ..and the new total is 391. ...

Now we claim that b is not in the domain of f. To see this, suppose there exists an i such that f(i) = b. Then the number of f(i) and  b must be different because we added 1 diagonal to each number. But this contradicts the b construction of  the row diagonal. Therefore, we constructed an integer b that is not  inside f, which contradicts the assumption that f is a one-to-one function from A to Z. So there is no infinite set A for which |A| < |Z+ | = א 0.

Learn more about Natural number here

https://brainly.com/question/17429689

#SPJ1

The slope between point X and point C is also 2/3.

Since triangle ABC is similar to triangle XYC, we know that the corresponding angles of the two triangles are equal. Therefore, angle A in triangle ABC is equal to angle X in triangle XYC.

Both triangles have their hypotenuses lying on AX. Therefore, the ratio of the lengths of the hypotenuses is equal to the ratio of the lengths of the sides opposite these hypotenuses. That is,

AC/AB = XC/XY

We know that AC/AB = 2/3 from the given information. Therefore,

2/3 = XC/XY

Since the coordinates of points C and X are not given, we cannot determine their slope directly. However, we know that the slope between point A and point C is 2/3 from the given information.

Since triangle ABC is similar to triangle XYC, we can conclude that the slope between point X and point C is the same as the slope between point A and point C. Therefore, the slope between point X and point C is also 2/3.

To learn more about slope here

https://brainly.com/question/19131126

#SPJ1

If we cannot find any scalar coefficients (c1, c2, c3, c4) that satisfy the equation: b = c1*col1(A) + c2*col2(A) + c3*col3(A) + c4*col4(A), then b is not in the column space of A.

To construct a nonzero 4x4 matrix A and a 4-dimensional vector b such that b is not in the column space of A, follow these steps:

Step 1: Create a 4x4 matrix A with nonzero elements.
For example,
A = | 1  2  3  4 |
     | 5  6  7  8 |
     | 9 10 11 12 |
     |13 14 15 16 |

Step 2: Create a 4-dimensional vector b that is not a linear combination of the columns of matrix A.
For example,
b = | -1 |
      | -1 |
      | -1 |
      | -1 |

Step 3: Verify that vector b is not in the column space of A.
To be in the column space of A, b must be a linear combination of the columns of A. If we cannot find any scalar coefficients (c1, c2, c3, c4) that satisfy the equation:

b = c1*col1(A) + c2*col2(A) + c3*col3(A) + c4*col4(A),

then b is not in the column space of A.

In this example, there are no scalar coefficients (c1, c2, c3, c4) that satisfy the equation, so b is not in the column space of A.

to learn more about dimensional vector click here:

https://brainly.com/question/28931875

#SPJ11

If beta = 0.7500, then the power of the experiment is 0.2500.


Beta (β) is the probability of making a type II error, which is failing to reject a false null hypothesis. In other words, beta represents the likelihood of concluding that there is no difference between two groups when in fact there is a difference.

Power (1-β) is the probability of correctly rejecting a false null hypothesis. In other words, power represents the likelihood of detecting a difference between two groups when in fact there is a difference.

So if beta = 0.7500, then the probability of failing to reject a false null hypothesis is 0.7500. Therefore, the probability of correctly rejecting a false null hypothesis (power) is 1 - 0.7500 = 0.2500.

Know more about statistical hypothesis here:

https://brainly.com/question/29753183

#SPJ11

Kathy runs at a speed of 2 mph, and Dennis rides his bike at a speed of 7 mph.

To find the speed that Kathy is running and that Dennis is riding, the first relationship is:

K = D - 5

Then use the formula for time:

Time for Kathy = Time for Dennis

4 mi / K = 14 mi / D

4 mi / (D - 5) = 14 mi / D

4D = 14(D - 5)

4D = 14D - 70

-10D = -70

D = 7 mph

Then we can find Kathy's speed :

K = 7 - 5

K = 2 mph

Find out more on speed at https://brainly.com/question/4931057

#SPJ1

Answer:

b. hypothesis.

Step-by-step explanation:

Answer:

s = 5[tex]\sqrt{6}[/tex]

Step-by-step explanation:

using the cosine ratio in the right triangle and the exact value

cos30° = [tex]\frac{\sqrt{3} }{2}[/tex] , then

cos30° = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{s}{10\sqrt{2} }[/tex] = [tex]\frac{\sqrt{3} }{2}[/tex] ( cross- multiply )

2s = 10[tex]\sqrt{2}[/tex] × [tex]\sqrt{3}[/tex] = 10[tex]\sqrt{6}[/tex] ( divide both sides by 2 )

s = 5[tex]\sqrt{6}[/tex]

Answer:

Step-by-step explanation:

...... The problem is glitched re send the image/

Product AB using the definition;

AB = [-17 -1]
    [-10 20]

Product AB using row-column rule;

AB = [-17 -1]
    [-10 20]

We first need to find the dimensions of each matrix. Matrix A has dimensions 2x3 (2 rows, 3 columns) and matrix B has dimensions 3x1 (3 rows, 1 column). Since the number of columns in matrix A is equal to the number of rows in matrix B, we can multiply them together.

Using the definition, we compute AB as follows:

AB = [(-1)(3) + (5)(-2) + (2)(-2)] [(-1)(1) + (5)(3) + (2)(-2)]
    [(2)(3) + (4)(-2) + (-3)(-2)] [(2)(1) + (4)(3) + (-3)(-2)]

AB = [-17 -1]
    [-10 20]

Now let's use the row-column rule to compute AB. To do this, we need to multiply each row of matrix A by each column of matrix B, and add up the products.

First, let's write out the product of the first row of A with B:

A[1,1]B[1,1] + A[1,2]B[2,1] + A[1,3]B[3,1]
= (-1)(3) + (5)(-2) + (2)(-2)
= -3 -10 -4
= -17

Next, let's write out the product of the second row of A with B:

A[2,1]B[1,1] + A[2,2]B[2,1] + A[2,3]B[3,1]
= (2)(3) + (4)(-2) + (-3)(-2)
= 6 -8 6
= -10

Finally, we can combine these products to get the matrix AB:

AB = [-17 -1]
    [-10 20]

Learn more about row-column rule.

brainly.com/question/9264846

#SPJ11

a. The sample size for finance majors is 247

b. we can be 90% confident that the true average starting salary for finance majors is between $66,733 and $69,557

Standard deviation is a statistical measure that indicates how much the data in a set varies from the average (mean) of the set.

a. The number of respondents in the finance major sample is:

n = 0.4142 x 598 ≈ 247

Rounding the nearest integer, sample size for finance majors is 247

b. We know the formula for confidence interval,

CI = X ± Z × (σ/√n)

Where:

X = sample mean = $ 68,145

Z = z-score for 90% confidence level = 1.645 (from a standard normal distribution table)

σ = population standard deviation = $ 13,489

n = sample size = 247

Putting the values, we get:

CI = 68,145 ± 1.645 × (13,489 / √247)

CI = 68,145 ± 1,411.899

CI = [66,733.10, 69,556.89]

Therefore, we can be 90% confident that the true average starting salary for finance majors is between $66,733 and $69,557

To know more about sample size, visit:

https://brainly.com/question/30224379

#SPJ1

The signal x; is a discrete signal with N samples and taking values x(n) = &**/N for n = 0,1,...,N-1. The signal Xt is the discrete Fourier transform of x; and is given by:

Xt(k) = Σn=0N-1 x(n) exp(-i2πnk/N)

This means that the Fourier transform of x(n) gives us a set of coefficients, Xt(k), that represent the contribution of each frequency, k, to the original signal x(n). In other words, the relationship between the signals x; and Xt is that Xt is a frequency-domain representation of x;.

The relationship between x and x ¢ is that x ¢ is the complex conjugate of x. This means that if x(n) = a + bi, then x ¢(n) = a - bi. In terms of the Fourier transform, this means that if X(k) is the Fourier transform of x(n), then X ¢(k) is the complex conjugate of X(k). Mathematically, this can be expressed as:

X ¢(k) = Σn=0N-1 x(n) exp(i2πnk/N)

So, the relationship between x and x ¢ is that they are complex conjugates of each other, and the relationship between their Fourier transforms, X(k) and X ¢(k), is that they are also complex conjugates of each other.
Hi! I understand that you want to know the relationship between signals x and x_t, as well as x and x', given a parameter k and a discrete signal x of duration N with values x(n) = &**/N for n = 0, 1, ..., N-1.

1. Relationship between x and x_t:
Assuming x_t is the time-shifted version of the signal x by k units, we can define x_t(n) as the time-shifted signal for each value of n:

x_t(n) = x(n - k)

Mathematically, the relationship between x and x_t is represented by the equation above, which states that x_t(n) is obtained by shifting the values of x(n) by k units in the time domain.

2. Relationship between x and x':
Assuming x' is the derivative of the signal x with respect to time, we can define x'(n) as the difference between consecutive values of x(n):

x'(n) = x(n + 1) - x(n)

Mathematically, the relationship between x and x' is represented by the equation above, which states that x'(n) is the difference between consecutive values of the discrete signal x(n), approximating the derivative of the signal with respect to time.

Visit here to learn more about complex conjugate brainly.com/question/29960316

#SPJ11