To save on heating bills, do you think the roof of a building should be lined with

1. a thermal conductor

2. a thermal insulator

3. nothing

Answer:

The right one.

Explanation:

The right one looks like it is getting the most sun.

Answer:

B. The same exact

Explanation:

I think B because in order to be a clone of your parent you have to have the exact same DNA and chromosomes.

Hope this helps :D

A clone has the same exact chromosomes as its parent.

CLONING:

Learn more at: https://brainly.com/question/12483409?referrer=searchResults

Answer:

5.78 × 10¹⁴ Hz

Explanation:

Step 1: Given and required data

Step 2: Convert "λ" to meters

We will use the conversion factor 1 m = 10⁹ nm.

519. nm × 1 m/10⁹ nm = 5.19 × 10⁻⁷ m

Step 3: Calculate the frecquency of this light

We will use the following expression.

c = λ × ν

ν = c/λ

ν = (3.00 × 10⁸ m/s)/5.19 × 10⁻⁷ m

ν = 5.78 × 10¹⁴ s⁻¹ = 5.78 × 10¹⁴ Hz

Answer:

Acidic solution used to clean a crucible

Explanation:

This liquid dissolves alcoholic solvents such as crucible, that is why it was selected as the ideal for cleaning.

Although it would be ideal to know in detail which chemical compound is the one you want to clean so that the cleaning technique has better effectiveness.

WASTE CONTAINER refers to the solvent used to rinse chemicals out of a beaker, and it also refers to the acid solution used to clean a crucible. Water used to rinse the detergent out of a flask refer to the SINK.

In conclusion, WASTE CONTAINER refers to the solvent used to rinse chemicals out of a beaker, and it also refers to the acid solution used to clean a crucible. Water used to rinse the detergent out of a flask refer to the SINK.

Learn more in:

https://brainly.com/question/10281181

Answer:

An Alkane

Explanation:

Formula of ethane is CH3-CH3

Answer:

Ethane is the second member of

An alkane

The empirical formula :

C₁₀H₁₆N₄SO₇

Given

6.4 g sample

Required

The empirical formula

Solution

mass C :

= 12/44 x 8.37 g

= 2.28

mass H :

= 2/18 x 2.75 g

= 0.305

mass N = 1.06

mass S :

= 32/64 x 1.23

= 0.615

mass O = 6.4 - (2.28+0.305+1.06+0.615) = 2.14 g

Mol ratio :

= C : H : N : S : O

= 2.28/12 : 0.305/1 : 1.06/14 : 0.615/32 : 2.14/16

= 0.19 : 0.305 : 0.076 : 0.019 : 0.133 divided by 0.019

= 10 : 16 : 4 : 1 : 7

The empirical formula :

C₁₀H₁₆N₄SO₇

Answer:

so basically you just

Explanation:

Answer:

Electron (e-)

Explanation:

An electron is just one of the fundamental particles

Answer:heyyyy

Explanation:

Answer:

120 extracted from the gas

Explanation:

The amount of heat required now to achieve that process is 60 J of heat added to the gas.

The amount of heat required to achieve the process is calculated as follows;

[tex]E = \frac{3}{2} nR\Delta T[/tex]

where;

[tex]E = \frac{3}{2} \times 0.032 \times 8.314 \times (150)\\\\E = 60 \ J[/tex]

Thus, the amount of heat required now to achieve that process is 60 J of heat added to the gas.

Learn more about amount of heat here: https://brainly.com/question/13439286

#SPJ2

Explanation:

H2SO3 is more acid than H2TeO3. Since S is more electronegative than Te is. In H2SO3, thus, dissociation of H+ would be smoother.

So, H2SO3's got high Ka.

HCH3SO2 is more acid than HCH3CO2. Since S is more electronegative than C. So, HCH3SO2 is a high Ka.

HClO2 is more acid than HClO. Since in HClO2, after the donation of H+ ion, the negative charge is set by two oxygen atoms, while in HClO, only one oxygen atom stabilizes the negative charge.

So, HClO2 is a high Ka

Answer:

Nucleus 3 i believe

Answer: Gravity will pull two objects together.

Explanation: It’s newton’s 1 and kinda his 2 law.

Answer:

The molarity of the acid, H₂SO₄ is 3.57 M

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

H₂SO₄ + 2NaOH —> Na₂SO₄ + 2H₂O

From the balanced equation above,

Mole ratio of the acid, H₂SO₄ (nₐ) = 1

Mole ratio of the base, NaOH (n₆) = 2

Finally, we shall determine the molarity of the acid, H₂SO₄. This can be obtained as follow:

Volume of base, NaOH (V₆) = 38.70 cm³

Molarity of base, NaOH (M₆) = 1.90M

Volume of acid, H₂SO₄ (Vₐ) = 10.30 cm³

Molarity of acid, H₂SO₄ (Mₐ) =?

MₐVₐ / M₆V₆ = nₐ/n₆

Mₐ × 10.3 / 1.9 × 38.70 = 1/2

Mₐ × 10.3 / 73.53 = 1/2

Cross multiply

Mₐ × 10.3 × 2 = 73.53 × 1

Mₐ × 20.6 = 73.53

Divide both side by 20.6

Mₐ = 73.53 / 20.6

Mₐ = 3.57 M

Thus, the molarity of the acid, H₂SO₄ is 3.57 M

Answer:

1 x 10⁻¹¹moldm⁻³

Explanation:

Given parameters:

pH of the solution  = 11

Unknown:

[H] = ?

Solution:

The hydrogen ion concentration is unknown.

From:

                      PH  = - log[H⁺]  

       So;

                     11 = -log[H⁺]

               [H⁺] = 1 x 10⁻¹¹moldm⁻³

Answer:

H₂   +   Cl₂    →    2HCl

Explanation:

The given reaction expression is shown below:

      H₂   +   Cl₂    →    HCl

We are to balance this given reaction expression.

Let us do this mathematically;

       aH₂   +   bCl₂    →    cHCl

Conserving H :  2a  = c

                   Cl:   2b  = c

Now, let a  = 1, c  = 2 , b = 1

So:

            H₂   +   Cl₂    →    2HCl

Answer:

Explanation:

From the given information:

The accuracy depends on the internal diameter of the cylinder. The cylinder with the least internal diameter is obviously more precise.

Let's assume 1% is the error of measurement.

Then, to measure 70 mL from 10 mL cylinder

The error = [tex]10 \times \dfrac{1}{100} \times 7[/tex]

= 0.7 mL

However; for a 100 mL cylinder, the error = 1 mL

Now,

The total volume for 10 mL = (70 + 0.7) = 70.7 mL

The total volume for 100 mL = (70 + 1 ) = 71 mL

Suppose the density (d) is same for both

Then;

the mass of 10 mL = ( d × 70.7) g

the mass pf 100 mL = (d × 71) g

Thus, the mass of 100 mL is greater than that of 10 mL.

Answer:

yes, but its better to drink water

Explanation:

Answer:

I can't see any picture?????

Answer:

The mass of a system does not change during a chemical reaction

Explanation:

Correct Answers

Answer:

both density is different so we can say nugget is not made by gold

Explanation:

given data

mass m = 7.6 g

volume  v = 7.22 mL to 8.06 mL

density of gold = 19.32 g/cm³

solution

we know that if there is when there is density of gold = density of nugget than we can say it is gold

so here

d = [tex]\frac{m}{v}[/tex]     ........1

here v = (8.06 - 7.22) = 0.84 mL

put here value in eq 1

d = [tex]\frac{7.6}{0.84}[/tex]

d = 9.047 g/ml

so here density is different so we can say it is not by gold

Answer:

Mg is the limiting reactant.

52.9 g of FeCl₃, remains after the reaction is complete.

Explanation:

First of all, we state the reaction's equation:

3Mg (s) + 2FeCl₃ (aq) → 2Fe (s) + 3MgCl₂ (s)

We determine the mol of each reactant:

43.5 g . 1mol / 24.3g = 1.79 mol of Mg

247 g . 1mol/ 162.2g = 1.52 mol of Iron (III) chloride.

Ratio is 2:3. 2 mol of chloride need 3 moles of Mg to react,

Then 1.52 moles will react with (1.52 . 3) /2 = 2.29 moles

We have 1.79 moles of Mg and we need 2.29, so the limiting reactant is the Mg.

We confirm the chlorine as the excess reactant:

3 moles of Mg need 2 moles of FeCl₃ to react:

1.79 moles of Mg will react to (1.79 . 2) /3  = 1.19 moles of FeCl₃

We have 1.52 moles of FeCl₃ and we only need 1.19, so it is ok, we said that the FeCl₃ is the excess.

After the reaction goes complete, (1.52 - 1.19) moles of FeCl₃ remains.

1.52 - 1.19 = 0.33 moles. We convert them to mass:

0.33 mol . 162.2g /1mol = 52.9 g

The molecules move faster and farther apart when the state changes from the liquid state to the gaseous state.

The matter exists in different forms in nature. Some substances have a fixed shape like wood and stone and can flow, take the shape of their container such as water, while there are forms of matter that do not have certain shapes or sizes.

In solids, the molecules are closely packed and thus solids have a rigid structure. The compact packing of solids means that the molecules are very close to each other and the molecules do not show movement. The kinetic energy of molecules in the solid is the least.

In liquids, the molecules are some distance away from each other and they show movements. Since the molecules in liquid show significant movement, they have some kinetic energy. The kinetic energy of molecules in the liquid is greater than that of solids.

In gases, the molecules are farther from each other and thus their molecules show large amounts of movement. The kinetic energy in gases is the greatest in comparison to solids and liquids.

Learn more about states of matter, here:

https://brainly.com/question/13233345

#SPJ2

The correct name of this isotope : Oxygen - 16

Given

Isotope : ₈¹⁶O

Required

The correct name

Solution

The elements in nature have several types of isotopes  

Isotopes are elements that have the same Atomic Number (Proton)  

Atomic mass is the average atomic mass of all its isotopes  

In the following element notation,

[tex]\large {{{A} \atop {Z}} \right X}[/tex]

X = symbol of elemental atom

A = mass number

Z = atomic number

The isotope name is usually followed by its mass number, so the symbol above can be expressed as oxygen - 16

Answer:

A,

C.

D.

B.

Explanation:

The front vent of a fume hood that assists and maintain proper air circulation is Airfoil

The horizontal flat surface area of the fume hood where experiments are being carried out is Work  Surface.

The main characteristics which demonstrate and describes how substances evaporate rapidly and readily into the thin air while producing a huge amount of vapor is known as Volatile

In front of the fume hood, lies the glass panel whose main purpose is to shield the user from the hazardous substance. This glass panel is known as the Sash.

Answer:

evolution

Explanation:

Answer:

because bird species are reproduced sexually

so there would be some variations in every generation.

that's why birds could be different from their ancestors.

Answer:

Partial pressures:

PCl₅ = 0.558 atm

PCl₃ = 0.22 atm

Cl₂ = 0.22 atm

Explanation:

From the given information:

The number of moles of PCl₅ associated with the evaporation is:

[tex]n_{PCl_5}= \dfrac {weight \ of \ PCl_5} {M.Wt. \ of \ PCl_5}[/tex]

[tex]n_{PCl_5}= \dfrac {2.69 \ g} {208.5 \ g/mol}[/tex]

[tex]n_{PCl_5}= 0.013 \ mol[/tex]

Temperature of the gas = 250° C = (250 + 273.15) K

= 523.15 K

Using the Ideal gas equation to determine the pressure exerted by the completely vaporized PCl₅

PV = nRT

[tex]P = \dfrac{nRT}{V}[/tex]

[tex]P = \dfrac{0.0013 \ mol \times 0.082 \ Latm^0 K^{-1} . mol ^{-1} \times 523.15 \ K}{1.0 \ L}[/tex]

P = 0.558 atm

Thus, at  250° C, decomposition of PCl₅ occurs.

In the container, PCl₅  decomposes to PCl₃ and Cl₂.

i.e.

[tex]PCl_{5(g)} \to PCl_{3(g)}+ Cl_{2(g)}[/tex]

Using Dalton's Law:

[tex]P_{total } =P_1 + P_2+P_3 +...[/tex]

[tex]P_1 = P_{Total} \times X_1[/tex]

where;

X = mole fraction

Then, the total no. of moles in the container is:

[tex]n = \dfrac{PV} {RT}[/tex]

[tex]n = \dfrac{1\ atm \times 1.0\ L}{0.0821 \ L \ atm \ K^{-1}.mol \times 523.15\ K}[/tex]

n = 0.023 mol

Now, the container contains a total amount of 0.023 mol where initially 0.013 mol are that of PCl₅ and remaining 0.005 mol of PCl₃ and 0.005 mol of Cl₂.

Thus, the partial pressure of  PCl₃  is:

[tex]P__{PCL_3} }= P_{total} \times \dfrac{no. \ of \ moles \ of PCl_5}{total \ no. \ of \ moles}[/tex]

[tex]P__{PCL_3}} = 1 \ atm \times \dfrac{0.005}{0.023}[/tex]

[tex]P__{PCL_3}} = 0.22 \ atm[/tex]

Thus, since the no of moles of PCl₃ and Cl₂ are the same, then the partial pressure for Cl₂ is = 0.22 atm

Answer:

b) The mass of your total product is greater than your total reactants

Explanation:

Mass of reactants is 20 and product is 25 which never occurrs in real

The question is incomplete, the complete question is;

A student prepared several aqueous sodium chloride (NaCl) solutions to observe boiling point elevation at various molal concentrations, however, several errors were made throughout the procedure. Determine whether these errors would cause the observed boiling point to be increased or decreased relative to the expected boiling point, based on the procedure, or have no effect on the experimental results.

* The flask is washed with water but not thoroughly dried before preparing the solution

* The mass of NaCl used to prepare the solution is 5.400 grams instead of 4.400 grams

* Some of the prepared solution splashes out of the flask prior to observation of the boiling point

* When making the salt solution, 55.0 milliliters of water is added instead of 50.0 milliliters

Answer:

The flask is washed with water but not thoroughly dried before preparing the solution  - decrease

The mass of NaCl used to prepare the solution is 5.400 grams instead of 4.400 grams

-increase

Some of the prepared solution splashes out of the flask prior to observation of the boiling point- have no effect

When making the salt solution, 55.0 milliliters of water is added instead of 50.0 milliliters- decrease

Explanation:

If the flask is washed but not dried, then the solution will be further diluted than expected. As a result of this further dilution, the observed boiling point will be less than the expected boiling point because the boiling point depends on the solution's concentration.

If more solute is added than expected, the concentration of the solution is increased and the boiling point also increases above the expected boiling point due to the increase in amount of solute present.

If some of the solution splashes out of the flask prior to boiling, the boiling point is not affected because the concentration of the solution was not altered. The boiling point only changes when the concentration of the solution is changed.

If 55 ml of water is added instead of 50 ml, the solution is now more dilute than expected thereby reducing the concentration of the solution and the boiling point. Remember that, as the concentration of the solution decreases, the boiling point decreases accordingly.