title = q9a1 The angles in a perfect tetrahedron are 109.5°, and those for a trigonal plane are 120°. Based on its Lewis structure, what would you predict for the bond angles in ammonia, NH3?

There are 356.2 mg of Cl in a 3.49 g sample of cleaning solution containing 21.5 wt% NaOCl (74.44 g/mol).

To calculate the milligrams of Cl (35.453 g/mol) in a 3.49 g sample of cleaning solution containing 21.5 wt% NaOCl (74.44 g/mol), first calculate the weight of NaOCl in the sample:3.49 g x 0.215 = 0.75 g NaOCl

Next, calculate the number of moles of NaOCl in the sample:0.75 g NaOCl ÷ 74.44 g/mol = 0.01006 mol NaOClSince NaOCl is the only source of Cl in the solution, this also represents the number of moles of Cl in the sample.

Finally, convert the number of moles of Cl to milligrams:0.01006 mol x 35.453 g/mol x 1000 mg/g = 356.2 mg Cl.

We have to calculate the milligrams of Cl in a cleaning solution sample.

The sample contains NaOCl, so we will first calculate the number of moles of NaOCl in the sample. This will also give us the number of moles of Cl in the sample because NaOCl is the only source of Cl in the solution.

To know more about  moles  click on below link:

https://brainly.com/question/30885025#

#SPJ11

The percent yield of the reaction is approximately 88.71%.

To calculate the percent yield of the reaction, we need to compare the actual yield (the amount of Cl₂ formed) to the theoretical yield (the amount of Cl₂ that would be formed if the reaction proceeded with complete conversion of TiCl₄).

First, we need to determine the molar masses of TiCl₄ and Cl₂. The molar mass of TiCl₄ is calculated as follows:

Ti: 1 atom x 47.87 g/mol = 47.87 g/mol

Cl: 4 atoms x 35.45 g/mol = 141.80 g/mol

Total molar mass of TiCl₄ = 47.87 g/mol + 141.80 g/mol = 189.67 g/mol

Next, we can calculate the number of moles of TiCl₄ and Cl₂ based on the given masses:

Moles of TiCl₄ = 15.70 g / 189.67 g/mol ≈ 0.08274 mol

Moles of Cl₂ = 10.40 g / 70.90 g/mol ≈ 0.14676 mol

From the balanced chemical equation for the reaction:

TiCl₄ + 2O₂ → TiO₂ + 2Cl₂

We can see that the stoichiometric ratio between TiCl₄ and Cl₂ is 1:2. Therefore, according to the balanced equation, the theoretical yield of Cl₂ would be:

Theoretical yield of Cl₂

= 2 (moles of TiCl₄)

= 2 (0.08274 mol)

= 0.16548 mol

Percent yield = (actual yield / theoretical yield) 100

= (0.14676 mol / 0.16548 mol) 100 ≈ 88.71%

Learn more about molar mass here:

https://brainly.com/question/30640134

#SPJ4

To calculate the number of grams of nickel (II) nitrate hexahydrate required, we need to use the formula:

moles = concentration (M) x volume (L)

First, let's convert the volume from milliliters (mL) to liters (L):

25 mL = 25/1000 L = 0.025 L

The molar mass of nickel (II) nitrate hexahydrate can be calculated as follows:

Nickel (Ni) atomic mass = 58.69 g/mol

Nitrogen (N) atomic mass = 14.01 g/mol

Oxygen (O) atomic mass = 16.00 g/mol

Molar mass of nickel (II) nitrate = (1 * Ni) + (2 * N) + (6 * O)

= (1 * 58.69) + (2 * 14.01) + (6 * 16.00)

= 58.69 + 28.02 + 96.00

= 182.71 g/mol

Now, we can calculate the number of moles:

moles = 0.034 M x 0.025 L

= 0.00085 moles

Finally, we can calculate the mass of nickel (II) nitrate hexahydrate:

mass = moles x molar mass

= 0.00085 moles x 182.71 g/mol

≈ 0.155 grams

Therefore, approximately 0.155 grams of nickel (II) nitrate hexahydrate are required to prepare a 25 mL solution with a concentration of 0.034 M.

Learn more about Molar mass here : brainly.com/question/31545539
#SPJ11

The free energy required to synthesize ATP in a rat hepatocyte is 24,365.6364 J/mol

To calculate the free energy required to synthesize ATP in a rat hepatocyte, we can use the formula:

ΔG'º = -RTln(Q)

where:

ΔG'º is the standard free energy change,

R is the gas constant (8.314 J/(mol·K)),

T is the temperature in Kelvin,

ln(Q) is the natural logarithm of the mass-action ratio.

Given:

ΔG'º = -30.5 kJ/mol

T = 37°C = 37 + 273.15 = 310.15 K

Q = 5.33 x [tex]10^{(-10)[/tex] M

First, we need to convert ΔG'º from kJ/mol to J/mol:

ΔG'º = -30.5 kJ/mol = -30.5 x [tex]10^3[/tex] J/mol

Next, we can calculate the free energy required to synthesize ATP using the formula:

ΔG = ΔG'º - RTln(Q)

ΔG = [tex](-30.5 * 10^3 J/mol) - (8.314 J/(molK) * 310.15 K) * ln(5.33 x 10^{(-10))[/tex]

≈ -30,500 J/mol - 2576.1911 J × (-21.3364)

≈ -30,500 J/mol + 54,865.6364 J

≈ 24,365.6364 J/mol

Calculating this expression will give us the value of ΔG, which represents the free energy required to synthesize ATP in a rat hepatocyte.

Learn more about here:

#SPJ11

Answer:

Orbital motion occurs whenever an object is moving forward and at the same time is pulled by gravity toward another object. ... The result is a circular or oval path called an orbit, in which one object keeps moving around the other. Because of the relatively great gravity of the sun, Earth orbits the sun

Answer:

It is an Ionic bond

The molarity of the 30% by mass hydrogen peroxide solution is 9.78 M, the mole fraction of H2O2 is 1.0, and the molar concentration is also 9.78 M.

To calculate the molarity, mole fraction, and molar concentration (molarity) of a 30% by mass hydrogen peroxide (H2O2) solution with a density of 1.11 g/ml, we need to follow these steps:

Step 1: Calculate the molarity (M):

The molarity is defined as the number of moles of solute per liter of solution. We need the molar mass of hydrogen peroxide to calculate the number of moles.

The molar mass of H2O2 = 2(1.01 g/mol) + 2(16.00 g/mol) = 34.02 g/mol

The mass of H2O2 in 100 g of the solution (30% by mass) = 30 g

Number of moles of H2O2 = mass / molar mass = 30 g / 34.02 g/mol = 0.882 mol

The volume of the solution can be calculated using the density:

Volume of solution = mass of solution / density = 100 g / 1.11 g/ml = 90.09 ml = 0.09009 L

Molarity (M) = moles / volume = 0.882 mol / 0.09009 L = 9.78 M

Step 2: Calculate the mole fraction (χ) of H2O2:

The mole fraction is the ratio of the moles of H2O2 to the total moles of all components in the solution.

Mole fraction (χ) = moles of H2O2 / total moles

Total moles = moles of H2O2 = 0.882 mol

Mole fraction (χ) = 0.882 mol / 0.882 mol = 1.0

Step 3: Calculate the molar concentration (molarity):

Molar concentration (molarity) is the number of moles of solute per liter of solution.

Molarity (M) = moles of H2O2 / volume of solution = 0.882 mol / 0.09009 L = 9.78 M

Learn more about mole fraction here:

https://brainly.com/question/3072493

#SPJ11

Answer:

n = 0.19 mol

Explanation:

Given mass = 15 g

The molar mass of AsH₃ = 77.94 g/mol

We need to find the number of moles in 15 g of AsH₃. We know that,

No. of moles = given mass/molar mass

[tex]n=\dfrac{15}{77.94 }\\\\n=0.19\ mol[/tex]

So, there are 0.19 g/mol. Hence, the correct option is equal to 0.19 mol.

Answer:

C. one star

Explanation:

Of course our solar system has one unique star which is the sun while others have atleast two which are called binary solar

Molecular crystals are held together by the intermolecular forces of dispersion and dipole-dipole forces and by hydrogen bonding. The statement is True.

Molecular crystals are held together by the intermolecular forces of dispersion, dipole-dipole forces, and hydrogen bonding.

Dispersion forces are the weakest intermolecular forces and are present in all molecules. They are caused by the temporary uneven distribution of electrons in a molecule, which creates a temporary dipole.

The temporary dipole in one molecule can induce a dipole in another molecule, resulting in a weak attractive force.

Dipole-dipole forces are stronger than dispersion forces and are present in molecules that have a permanent dipole. The positive end of one dipole is attracted to the negative end of another dipole, resulting in a stronger attractive force.

Hydrogen bonding is the strongest intermolecular force and is present in molecules that contain a hydrogen atom bonded to a highly electronegative atom, such as oxygen, nitrogen, or fluorine.

The hydrogen atom is partially positive, while the electronegative atom is partially negative. This creates a strong attractive force between the hydrogen atom of one molecule and the electronegative atom of another molecule.

The type of intermolecular force that is most important in holding a molecular crystal together depends on the structure of the molecules in the crystal.

For example, a crystal of water is held together by hydrogen bonding, while a crystal of methane is held together by dispersion forces.

To know more about Molecular crystals, refer here:

https://brainly.com/question/30790556#

#SPJ11

Answer:

What is this?

Explanation:

The type of radioactive decay that results in no change in mass number and atomic number for the starting nucleus is gamma decay. The correct answer is option D.

Gamma decay is a type of radioactive decay that involves the emission of gamma rays from an atomic nucleus. Gamma rays are high-energy photons that are emitted when the nucleus undergoes a transition from a higher energy state to a lower energy state. Gamma decay does not result in a change in the atomic number or mass number of the nucleus, as no particles are emitted from the nucleus. Instead, the nucleus simply releases energy in the form of a gamma ray. Therefore, option D) Gamma is the correct answer.

Learn more about radioactive decay here:

https://brainly.com/question/1770619

#SPJ11

Answer: An orbit is a regular, repeating path that one object in space takes around another one. An object in an orbit is called a satellite. A satellite can be natural, like Earth or the moon. Many planets have moons that orbit them

HOPE THIS HELPS

Out of the given options, CH3COOH is the strongest acid.

The strength of an acid is determined by its ability to donate protons. The more the acid donates protons, the stronger it is.Acid strength increases with decreasing pKa value. The pKa value of CH3COOH is 4.76. The lower the pKa value, the stronger the acid. CH3OCH3 is a weakly acidic compound with a pKa value of 15.5, whereas CH3CH2OH is a slightly acidic compound with a pKa value of 16. CH3NHCH3 is a non-acidic compound because it lacks an acidic hydrogen atom. CH3CH=CH2 is an alkene and is not an acidic compound.To summarize, CH3COOH is the strongest acid among the given options with a pKa value of 4.76.

So, option c is the correct answer.

Learn more about CH3COOH here,

https://brainly.com/question/13265808

#SPJ11

The statement on the effect of the addition of CuCl₂(aq) to the cathodic compartment is True.

According to Le Chatelier's principle, if the concentration of a reactant in a reaction at equilibrium is increased, the reaction will shift in the direction that consumes that reactant.

The reaction at the cathode is :

Cu₂ + ( aq ) + 2e- ⇄ Cu(s)

By adding CuCl₂(aq), we increase the concentration of Cu₂+ ions in the cathodic compartment. This would cause the reaction to shift to the right, which means more Cu(s) would be produced and more electrons would be consumed.

Therefore, increasing the concentration of Cu₂+ ions in the cathodic compartment will increase the cell potential or emf.

Find out more on addition to cathode at https://brainly.com/question/14150731

#SPJ4

The statement "throughout history, people have used chemicals to change their moods, behavior, and levels of consciousness. " is true.

For example, ancient civilizations used alcohol, opium, and other natural substances for medicinal and religious purposes.

In modern times, psychoactive substances such as caffeine, nicotine, and prescription medications are widely used to alter mood, perception, and behavior.

Some of these chemicals are legal, while others are illegal or controlled substances that can lead to addiction, overdose, and other negative consequences. It is important to understand the risks and benefits of using these substances and to seek help if substance abuse becomes a problem.

To know more about psychoactive substances  click on below link:

https://brainly.com/question/29657199#

#SPJ11

Answer:

[tex]K^{+}[/tex] and [tex]NO_{3}^{-}[/tex]

Explanation:

The equation for the reaction is AgNO3(aq) + KCl(aq) ==> AgCl(s) + KNO3(aq)

With all the ions, it is

[tex]Ag^{+}[/tex](aq) + [tex]NO_{3} ^{-}[/tex](aq) + [tex]K^{+}[/tex](aq) + [tex]Cl^{-}[/tex](aq)  ==> AgCl(s) +

[tex]K^{+}[/tex] and [tex]NO_{3} ^{-}[/tex] do not change, so they are the spectator ions and are removed

The ionic equation is:

[tex]Ag^{+}[/tex](aq) + [tex]Cl^{-}[/tex](aq) ==> AgCl(s)

Answer:

Gamma-rays are a form of electromagnetic radiation, as are radio waves, infrared radiation, ultraviolet radiation, X-rays and microwaves. Gamma-rays can be used to treat cancer, and gamma-ray bursts are studied by astronomers.

Explanation:

Hope this helped Mark BRAINLIEST!!!

Gamma Rays are ionizing Electromagnetic radiation, obtained by the decay of an atomic nucleus. Gamma rays are more penetrating, in matter, and can damage living cells to a great extent. Gamma rays are used in medicine (radiotherapy), industry ( Sterilization and disinfection) and the nuclear industry.

The solubility of compounds such as sucrose, histidine, gelatin, and vegetable oil is biologically relevant due to various reasons. Solubility affects nutrient absorption, cellular processes, transport and distribution of molecules, structural and functional roles of biomolecules, and biological interactions.

Solubility facilitates the digestion and absorption of nutrients, enables cellular reactions and enzymatic processes, influences nutrient transport and distribution within organisms, contributes to the structural and functional properties of biomolecules, and impacts molecular interactions within biological systems. Understanding the solubility of these compounds enhances our understanding of biological mechanisms and aids in the development of therapeutic and nutritional approaches.

Read mroe on solubility here:https://brainly.com/question/23946616

#SPJ4

Answer:

Indo-Australian

Explanation:

Indo-Australian does not appear in both hemispheres.

Answer:

I can clarify, its into Australian

Answer:

See explanation below

Explanation:

1) Total Revenue:

Total revenue refers to the total amount of income that is generated when a company sells or offers their service.

It is usually calculated as the product of the product or services sold by the quantity.

It is calculated by ;

TR = Q * P

Where TR = Total Revenue

Q = Quantity

P = Price

2.) Average Revenue:

Average revenue is the revenue gotten by a company per unit of output sold. It is calculated by:

AR = TR / Q

Where AR = Average Revenue

TR = Total Revenue

Q. = Quantity

3.) Marginal Revenue:

This is the net revenue that is generated by selling an additional unit of commodity; which is the change in total revealer unit. It is calculated by:

MR = change in Total Revenue / change in Quantity

Where MR = Marginal Revenue

4.) Gross Profit:

Gross profit is the amount of revenue left after factoring out the cost of production and sales and servicing.

It is calculated by subtracting revenue from the cost of goods sold -

Gross Profit = Revenue - Cost of goods sold

Net Profit:

Net profit is the amount of money a company has left after subtracting all interests, tax expenses and cost.

It is calculated by;

Net Profit = Gross Profit - Expenses

Answer: the density is 997 kg

Explanation:

In the self-splicing of group 1 introns, the first transesterification reaction is initiated by the nucleophilic attack of the 3' hydroxyl group of the guanosine nucleotide within the intron on the 5' splice site.

This nucleophilic attack forms a 3' - 5' phosphodiester bond and releases the 5' exon. This process is facilitated by the catalytic properties of the intron RNA itself, without the involvement of any protein factors.

The self-splicing of group 1 introns involves two transesterification reactions that lead to the removal of the intron and the joining of the flanking exons.

The first transesterification reaction is the key step that initiates the splicing process. It is the attack of the guanosine nucleotide on the 5' splice site that triggers the subsequent splicing reactions.

To know more about transesterification, refer here:

https://brainly.com/question/31797652#

#SPJ11

I think First statement that is Option A, because, it has total equilibrium on both side, which will never result in increase of any pH level higher or lower than the state, hence

Option A.) is correct

Answer:

[tex]\boxed {\boxed {\sf molarity = 0.17 \ M \ C_6H_12O_6}}[/tex]

Explanation:

Molarity is found by dividing the moles of solute by liters of solution.

[tex]molarity = \frac {moles}{liters}[/tex]

We are given grams of a compound and milliliters of solution, so we must make 2 conversions.

1. Gram to Moles

We must use the molar mass. First, use the Periodic Table to find the molar masses of the individual elements.

Next, look at the formula and note the subscripts. This tells us the number of atoms in 1 molecule. We multiply the molar mass of each element by its subscript.

6(12.011)+12(1.008)+6(15.999)=180.156 g/mol

Use this number as a ratio.

[tex]\frac {180.156 \ g\ C_6H_12 O_6}{ 1 \ mol \ C_6H_12O_6}[/tex]

Multiply by the given number of grams.

[tex]78 \ g \ C_6H_12O_6 *\frac {180.156 \ g\ C_6H_12 O_6}{ 1 \ mol \ C_6H_12O_6}[/tex]

Flip the fraction and divide.

[tex]78 \ g \ C_6H_12O_6 *\frac { 1 \ mol \ C_6H_12O_6}{180.156 \ g\ C_6H_12 O_6}[/tex]

[tex]\frac { 78 \ mol \ C_6H_12O_6}{180.156 }= 0.432958102977 \ mol \ C_6H_12O_6[/tex]

2. Milliliters to Liters

There are 1000 milliliters in 1 liter.

[tex]\frac {1 \ L }{ 1000 \ mL}[/tex]

Multiply by 2500 mL.

[tex]2500 \ mL* \frac {1 \ L }{ 1000 \ mL}[/tex]

[tex]2500 * \frac {1 \ L }{ 1000 }= 2.5 \ L[/tex]

3. Calculate Molarity

Finally, divide the moles by the liters.

[tex]molarity = \frac {0.432958102977 \ mol \ C_6H_12O_6}{ 2.5 \ L}[/tex]

[tex]molarity = 0.173183241191 \ mol \ C_6H_12O_6/L[/tex]

The original measurement has 2 significant figures, so our answer must have the same. That is the hundredth place and the 3 tells us to leave the 7.

[tex]molarity \approx 0.17 \ mol \ C_6H_12O_6 /L[/tex]

1 mole per liter is also equal to 1 M.

[tex]molarity = 0.17 \ M \ C_6H_12O_6[/tex]

CH4 + 2 O2 = CO2 + 2 H2O

i believe it's this :p

Answer:

Cinder cone

Explanation:

If this atom has one additional neutron but the other subatomic particles remained the same as shown, this slightly different atom would be called an isotope.

An isotope is a variant of an atom that has a different number of neutrons. Because isotopes of the same element have the same number of protons in the nucleus, they all have the same atomic number. However, they can differ in mass number, and therefore in atomic mass. In a neutral atom, the number of protons in the nucleus equals the number of electrons that orbit the nucleus, giving the atom a net electrical charge of zero.

However, the number of neutrons in the nucleus can differ, implying that isotopes of the same element may have different atomic masses.

Learn more about isotope here: https://brainly.com/question/28039996

#SPJ11