Answer:
True :)
Explanation:
You can recycle it! Tire recycling is the most practical and environment-friendly way of disposing of old and worn-out tires. Due to their inherent durability, large volume and environment and health risks, tires are one of the most problematic sources of solid wastes.
Hope it helped have a nice day! :)
draw a well labelled block diagram of a nuclear power station
Answer:
Here! I did an assignment about this a long time ago.
Multiply. Write the answer in simplest form. 1 3/10×1/8
9514 1404 393
Answer:
13/80
Explanation:
The product is ...
(1 3/10)×(1/8) = (13/10)×(1/8) = (13×1)/(10×8) = 13/80
ký hiệu của vật liệu cơ khí
Answer:
by hìuuf5ëcz
Explanation:
6tgiïuggd
the weight of the frame, body, and engine is supported by the springs is called what?
it is called supported mass :)
Which of these is a location where you can recycle antifreeze?
Off-site
On-site
Mobile
All of the above
The locations where you can recycle antifreeze are Off-site, On-site, and Mobile option (D) all of the above is correct.
What is recycling technology?Computer recycling, electronic recycling, or e-waste recycling is the disassembly and separation of components and raw materials of waste electronics.
Although the procedures of re-use, donation and repair are not strictly recycling, these are other common sustainable ways to dispose of IT waste.
Because antifreeze contains heavy elements including lead, cadmium, and chromium, which make it hazardous waste and should not be dumped in public places, it may become unlawful to throw antifreeze.
Thus, the locations where you can recycle antifreeze are Off-site, On-site, and Mobile option (D) all of the above is correct.
Learn more about the recycling technology here:
https://brainly.com/question/23371977
#SPJ2
Q2- The figure below shows a closed tank holding water and oil. Air pressure is P kPa is
the air pressure above the oil. Calculate the pressure at the bottom of the container?
What is the pressure at the bottom of the container?
Use your last three digits of your ID the pressure values
0.25 m
Air
0.50 m
Oil
(sg = 0,85)
0,75 m
Water
18 m
1.2 m
ID:306
Answer:
The figure below shows a closed tank holding water and oil. Air pressure is P kPa is the air pressure above the oil. Calculate the pressure at the bottom of the container? What is the pressure at the bottom of the container? Use your last three digits of your ID the pressure values 355 0.25 Air 0.50 m O. isg 0.85 0.75 m Wat 1.8m 1.2m
Answer:
the air pressure above the oil. Calculate the pressure at the bottom of the container?
What is the pressure at the bottom of the container?
Use your last three digits of your ID the pressure values
0.25 m
Air
0.50 m
Oil
(sg = 0,85)
0,75 m
Water
18 m
1.2 m
ID:306
Explanation:
the air pressure above the oil. Calculate the pressure at the bottom of the container?
What is the pressure at the bottom of the container?
Use your last three digits of your ID the pressure values
0.25 m
Air
0.50 m
Oil
(sg = 0,85)
0,75 m
Water
18 m
1.2 m
ID:306
Q.1 I am Brainliest ok what you are
Answer:
A hotdog :P
And potato :3
advantages of high rupturing capacity fuses
Answer:
It clears high as well as low fault currents.Do not deteriorate with age.Having high-speed operation.Provides reliable discrimination.Require no maintenance.Cheaper than other circuit interrupting devices with same rating.Permit consistent performance.
What are the coventional representative of automation
Answer:
ere el merjor 5iyer
Explanation:
yyhh espero ayuder 8 mucho 666
I will rate 5 stars/brainliest if you help me!!! A company produces A, B, and C and can sell these products in unlimited quantities at the following unit prices: A, $10; B, $56; C, $100. Producing a unit of A requires 1 hour of labor; a unit of B, 2 hours of labor plus 2 units of A; and a unit of C, 3 hours of labor plus 1 unit of B. Any A that is used to produce B cannot be sold. Similarly, any B that is used to produce C cannot be sold. A total of 40 hours of labor are available. Formulate an LP to maximize the company’s revenues. (Please solve the LP with Lindo or Excel).
Answer: 0
Explanation: i need to add it up to get what u want
The oil system is:
The pistons and chambers
Anything in the engine that motor oil touches
The camshaft and lifters
The dipstick
Answer:
From the main bearings, the oil passes through feed-holes into drilled passages in the crankshaft and on to the big-end bearings of the connecting rod.
How do we use the brakes in the airplane?
Answer:
When a pilot pushes the top of the right pedal, it activates the brakes on the right main wheel/wheels, and when the pilot pushes the top of the left rudder pedal, it activates the brake on the left main wheel/wheels. The brakes work in a rather simple way: they convert the kinetic energy of motion into heat energy.
Explanation:
When a pilot pushes the top of the right pedal, it activates the brakes on the right main wheel/wheels, and when the pilot pushes the top of the left rudder pedal, it activates the brake on the left main wheel/wheels. The brakes work in a rather simple way: they convert the kinetic energy of motion into heat energy.
source of energy in wind power
The energy in which wind is used to generate electricity is known as wind energy. Wind turbines convert the kinetic energy in the wind into mechanical power. This mechanical power is then used for various purposes. Wind energy is a free and renewable resource. It is a clean and non-polluting source of energy.
A water jet leaves a fixed nozzle with a velocity of 10 m/s. The jet diameter is 10 cm. A 30° cone is pushed into the water jet at a speed of 5 m/s. The water impinges on the cone with the jet axis and the cone axis in perfect alignment so that the water is divided evenly by the cone. Bernoulliâs equation suggests that because the pressure on the jet boundary is constant, the water velocity relative to the cone surface is constant.
Required:
Determine the thickness of water stream when it reaches the base of the cone.
Answer:
I dont understand what your asking here.
Explanation:
Technician A says that a diode only allows current
flow in one direction? Technician B says a diode
simply regulates current flow in both directions.
(A) A only.
(B) B only
(C) Both A and B.
A
(D) Neither A nor B.
Answer:
c
Explanation:
because it depends on the base whether pnp or npn
The multimeter used on PV equipment should be true rms types capable of measuring at least how many volts AC or DC?
The multimeter used on PV equipment should be true RMS types capable of measuring at least 600 volts AC or DC.
This is based on the voltage readings capacity of the multimeter. The multimeter for measuring AC and DC volts usually comes with between 120-, 240-, 480-, 600- volts AC and 125-, 250-, 600-volts DC.
A multimeter is a common electronic instrument often used by technicians and engineers. It is either in analog or digital form. It is used for measuring any of the voltage, current, and resistance.
Hence, in this case, it is concluded that the correct answer is 600 voltages.
Learn more here: https://brainly.com/question/21062433
1. types of ecosystem ?
2. explain each ecosystem
One: the Church is one. This means that it is a single, united and global Church which has its basis in Christ Jesus. Holy: the Church is holy, because it is the Body of Christ with Jesus as the head. ... Apostolic: the origins and beliefs of the Church started out with the apostles at Pentecost.
Answer:
amen?...............
What is the number for account receivable?
Answer:
113 or 1-1300
Explanation:
Account receivable => Current Assets (11)
For receivable => 3
So, the number for account receivable is 113
Answer:
113
Maybe thats the answer for this question
4.
must be stored in an approved steel cabinet.
a. Gas cylinders
b. Cleaning chemicals
c. Welding rods
d. Leathers
Answer:
___________ are used in an automotive shop and can be harmful to the environment if not disposed of properly.
Oil filters
Fluorescent lamps
Mercury-containing lamps
All of the above
Answer: D all above
Explanation:
Jus done it
Spent lead-acid batteries are exempt from hazardous waste regulations if they are recycled.
True
False
Answer:
If your spent lead-acid batteries will be reclaimed through regeneration, you are exempt from all of the hazardous waste regulations except for Part 261 and §262.11 (both of which are waste identification requirements). ... The Universal Waste rules in Part 273 apply to all types of batteries that would be hazardous waste
Explanation:
Spent lead-acid batteries are exempted from hazardous waste regulations if they are recycled: A. True.
What is recycling?Recycling refers to a waste management technique that typically involves the process of converting a product that has reached the end of its life cyle into new and reusable products (items).
According to the Environmental Protection Agency (EPA), all spent lead-acid batteries are exempted from hazardous waste regulations only if they are recycled.
Read more on environmental protection here: https://brainly.com/question/4253930
#SPJ2
Describe a project in which you would use a pleater, ruffling foot, or gathering foot. Explain each of these tools and choose the one that might be necessary for the project you are describing.(FASHION DESIGN)
A project that requires using a pleater, a ruffling foot, or a gathering foot is the creation of a dress.
A pleater, a ruffling foot, and a gathering foot are all accessories for sewing machines or machines themselves that help fashion designers to give the fabric a different shape or texture, and therefore create unique pieces.
Pleater: This tool includes multiple needles that go through the fabric to create multiple pleatsRuffling foot: This is usually an accessory for sewing machines to create rufflesGathering foot: This tool is used to create gathers in fabric, these differ from ruffles because they are smaller and more subtle than rufflesAll of the tools can be used in the creation of a dress, for example, a pleater can be used in the top section of the dress to give it a nice texture and make it different from the skirt. In the same way, others such as the ruffling foot or the gathering foot can be used in the sleeves of the dress.
Learn more in: https://brainly.com/question/24702927
True or false for the 4 questions?
Answer:
true, false, true, true
Explanation:
Select the correct answer.
Which responsibility belongs to the Coast Guard?
ОА.
to save people promptly in case of earthquakes through efficient disaster management
OB.
to provide national security through offensive and defensive combat techniques via the airways
O C.
to take part in wars under the US Navy
OD.
to offer law and order to the public through peaceful protests and actions
Answer:
The Coast Guard is the nation's oldest continuous seagoing service with responsibilities including search and rescue (SAR), maritime law enforcement (MLE), aids to navigation (ATON), ice breaking, environmental protection, port security and military readiness.
Explanation:
there
If you answer the whole question and show your work/coding I will rate 5 stars/brainliest!!! Walnut Orchard has two farms that grow wheat and corn. Because of different soil conditions, there are differences in the yields and costs of growing crops on the two farms. The yields and costs are shown in the following table. Each farm has 100 acres available for cultivation. 11,000 bushels of wheat and 7,000 bushels of corn must be grown. Please have an LP model to minimize the total cost while meeting the demand and solve it with Lindo or Excel. You need to have all parts of a model: notation, objective function, constraints, and sign restrictions.
Answer: 18,100
Explanation: two farms that grow wheat and corn.
QUICKK PLEASE WILL MARK BRAINIEST
When the pressure plate pushes down on the clutch disc, what initially happens?
Answer:
it gives pressure this makes it stay where it has to be and lock it
Explanation:
yan llng alam ko
1. Determine the mass (in kg and in Ibm) and the weight (N and lbf) of the air contained in a
room whose dimensions are 6 mx 6 mx 8 m. Assume the density of the air is 1.16 kg/m3.
Knowing that the acceleration of gravity g=9.81 m/s = 62.2 ft2/s.
heres a link! ;)
http://www.econsulat.ro/
How do you use the brakes in an airplane?
Answer:
When a pilot pushes the top of the right pedal, it activates the brakes on the right main wheel/wheels, and when the pilot pushes the top of the left rudder pedal, it activates the brake on the left main wheel/wheels. The brakes work in a rather simple way: they convert the kinetic energy of motion into heat energy.
Income tax payable is included in the account...
Answer:
Current Liabilities
Explanation:
Accounts of Current Liabilities
Account PayableExpense PayableTax OutcomeTax IncomeIncome tax payableAnswer:
Current Liabilities
Maybe