Three processes share four resource units that can be reserved and released only one at a time. Each process needs a maximum of two units. Show that a deadlock cannot occur.

Answers

Answer 1

A deadlock cannot occur because each process only needs a maximum of two resource units, and there are four resource units that can be reserved and released one at a time.

What is deadlock?
Any circumstance in which no member of a group of entities can move forward because each one is waiting for another member, including itself, to act, such as sending a message or, more frequently, releasing a lock, is referred to as a deadlock in concurrent computing. Due to the frequent usage of hardware or software locks in multiprocessing, parallel computing, or distributed systems to manage shared resources to implement process synchronisation, deadlocks are a typical issue in these environments. When a process or thread enters a waiting state due to a system resource being held by some other process that also is waiting for another resource which is being held by some other waiting process, a deadlock occurs in the operating system.

To learn more about deadlock
https://brainly.com/question/15125658
#SPJ4


Related Questions

1) why do local variables lose their values between calls to the function in which they are defined.

Answers

Because they are created in memory when the function begins execution and destroyed when the function ends, thus local variables will lose their values between calls in the function in which they are already defined.

What is a Variable in the programming?

Variables are names given to locations in the computer memory, where data can be stored in a program. Based on the values assigned to the variables, this data can be known or unknown.

Variables can also be thought of as 'containers,' as they can hold more than one value. Their sole purpose is to store data and label it in memory, which can then be accessed throughout the program as needed.

In C programming, creating variables is also known as declaring variables. Variables are created in a variety of ways depending on the programming language.

To know more about Variable, visit: https://brainly.com/question/15706493

#SPJ4

a(n) ? is typically installed at each end of a utp backbone cable that has a corrugated aluminum shield over the core for the purpose of grounding the cable.

Answers

The correct answer is bonding clamp is typically installed at each end of a utp backbone cable that has a corrugated aluminum shield over the core for the purpose of grounding the cable.

The bonding clamp is used to ground OPGW to the tower by attaching to the tower grounding wire. Specific requirements vary from one utility to another. The product is an aluminum extruded parallel groove clamp. The ground clamps are typically used for connecting, grounding conductor to a water pipe, copper tubing, ground rods etc.

To learn more about  bonding clamp click the link below:

brainly.com/question/28064649

#SPJ4

A troubleshooting activity where there is a current state of events X, a future desired state of events Y, and the troubleshooter's objective is to move from X to Y is called ____.

Answers

Problem solving is a troubleshooting action where the goal is to go from the current state of affairs (X) to the intended future state of affairs (Y).

What is troubleshooting?
Troubleshooting
is a type of problem resolution that is frequently used to fix broken components or operations on a machine or a system. In order to address an issue and get the product or process back in operation, a logical, methodical search for the problem's source is required. It takes troubleshooting to find the symptoms. Eliminating potential sources of a problem allows you to determine the most likely cause. Troubleshooting also involves verification that the fix really returns the process or product to functioning order. Troubleshooting is, generally speaking, the detection or diagnosis of "trouble" in the management flow of the a system brought on by some sort of breakdown. Troubleshooting is the act of identifying and resolving the sources of these symptoms, which are initially stated as signs of malfunction.

To learn more about troubleshooting
https://brainly.com/question/14394407
#SPJ4

you need to connect your doorbell to the electricity in a battery. you should select a material that will

Answers

You need to connect your doorbell to the electricity in a battery. You should select a material that will accept the flow of electrons.

You can think of a circuit as a loop. In order for electric current to flow through the loop, the \sloop must not contain breaks. In other words, the circuit must \sbe closed. An open circuit has one or more breaks. Most \scircuits have an energy source, wires, a load, and a switch. As \smentioned, energy sources for circuits include generators and \sbatteries.

Machines that generate electricity from mechanical energy are called generators. In this lesson, we’ll focus on batteries. Inside a battery, two kinds of metals build up opposite charges. Negative charges build up on one end of the battery. Positive \scharges build up on the other end of the battery. This is why batteries are marked with \spositive sign (+) and a negative sign (–).

To know more about electricity click here:

https://brainly.com/question/12585384

#SPJ4

If a program needs to display, for example, some initial data in a Label component when the application starts running, this can be done by including an Init module. True or False

Answers

True, By integrating an Init module, a programme can display, for instance, some basic data inside a Label component whenever the application first launches.

What is application?
An application programme, often known as a software application or app for short, is a type of computer programme that is used by end users and is created to do a particular task that is unrelated to the operation of the computer. Examples include word processors, media players, and accounting software. All applications are referred to collectively by the word "application software." System software, which has to do with how computers work, and utility software are the other two main categories of software ("utilities"). Applications can be created as private, open-source, or project-based software, and they can be published independently or combined with the computer as well as its operating system software. Apps are typically referred to as being for mobile devices like phones.

To learn more about application
https://brainly.com/question/7145033
#SPJ4

discuss the use of the various windows in the ida pro and how they are used and then explain the use of data and code cross-references.

Answers

The various windows in IDA Pro are used for different purposes. The main window is used for displaying the disassembly of the program.

What is program?
A computer utilises a set of instructions called a program to carry out a particular task. A program is like the recipe for a computer, to use an analogy. It includes a list of components (called variables, which can stand for text, graphics, or numeric data) and a list of instructions (called statements), which instruct the computer on how to carry out a certain activity. Specific programming languages, such C++, Python, and Ruby, are used to construct program. These are high level, writable, and readable programming languages. The computer system's compilers, interpreters, or assemblers subsequently convert these languages into low level machine languages. Technically, a human could write assembly language, a kind of low level language that really is one step above machine language. The register window is used for displaying the values of the registers. The memory window is used for displaying the contents of the memory. The cross-reference window is used for displaying the data and code cross-references. The data and code cross-references are used for finding the locations of the data and code that are referenced by the program.

To learn more about program
https://brainly.com/question/28519751
#SPJ4

Hong Kong currently dicard approximately 10,000 tonne per day (tpd) of MSW. The HKSAR Government decided to build a modern wate-to-energy incinerator for MSW treatment. The incinerator ha a capacity of 4,000 tpd. Given that the LHV of the MSW in Hong Kong i about 13,000 kJ/kg and the efficiency of the incinerator for electricity generation i 16%. Etimate the electricity production from the incinerator per day at it full capacity

Answers

The electricity production from the incinerator per day at it full capacity is 1950 MWh / day

Q = 10, 000 tonnes / day

Capacity of incinerator = 3000 tonnes / day

I tonne = looo kg

Low Heating Value of MSW = LHV = 13, 600 K J / kg

Efficiency of incinerator for electricity generation = 0 .18

Electricity production from incinerator per day at full capacity

LHV x full capacity x efficiency

= 13, 000 KJ/kg x /3000 x 1000 kg* 0 . 18 *1 MWh/3.6 * 106 KJ

1MWh = 3600000 KJ=> IKJ =1 MWh/3. 6 * 10⁶

electricity production = 1950 MWh / day

Electricity generation is the process of producing electricity from main energy sources. Prior to delivery to end consumers or storage, it is the phase for utilities in the electric power sector. Electricity must be "made" because it is not naturally occurring.

Learn more about electricity here:

https://brainly.com/question/14864572

#SPJ4

why does discharge in a stream usually increase downstream? group of answer choices because the volume of water in the stream increases with distance from the source because stream velocities increase with distance from the source because the stream is deeper downstream because the frictional resistance decreases downstream

Answers

Discharge in a stream usually increase downstream because the volume of water in the stream increases with distance from the source and the main reason of flowing downward is phenomena of gravity and also because stream velocities increase with distance from the source.

What is a Stream and How does it works?

A stream is a body of water that flows on the surface of the Earth. The terms stream and river are frequently used interchangeably, though rivers typically describe larger streams.

Streams require gravity and water to exist. When precipitation falls on the ground, some of it trickles into groundwater, but the majority of it runs downhill as runoff and collects in streams. A watershed, also known as a drainage basin, is the area where water is collected for a stream. Smaller streams frequently merge to form larger streams as they flow downhill. These smaller streams are referred to as tributaries.

To learn more about Stream Velocity, visit: https://brainly.com/question/17191912

#SPJ1

Other Questions
help please and thankyou the nurse is reviewing a medication prescription for a client prior to administration and observes that the route of administration is not present in the prescription. what is the appropriate action by the nurse to address this omission? A simple random sample of 100 observations was taken from a large population. The sample mean and the standard deviation were determined to be 1234 and 120 respectively. The standard error of the mean is. if you were making a marketing mix decision on place, which would be the three most important external factors you need to consider? imagine an economist makes this statement. "A country such as the u.s can have a large overall GDP, but it is more important to have a high per capita GDP, such as Luxembourg". Explain the rationale behind the economist statement. In the nineteenth century, this material became both less costly and more widely available for construction.a. glassb. ironc. concreted. steele. all of the other answers The volume of 10 drops of a liquid is 0.001 fluid ounces.What is the volume of 10,000 drops? working papers of continuing audit interest usually are filed with the administrative working papers.A. trueB. false President Bush signed the Energy Policy Act in 2005. How did that affect hydropower? Why do you think the three different forms of government evolved over time? Help with another slope and intercept ? You can always tell what the theme of a story is by:A. Examining the words and actions of the characters.B. Putting the main ideas together.C. Researching where the author wrote the story. a uniform slender rod ab rests on a frictionless horizontal surface, and a force p of magnitude 0.25 lb is applied at a in a direction perpendicular to the rod. assume that the rod weighs 2.15 lb. we are going to revisit our course assignment. however, there is going to be some changes. stop when and only when the user has exactly five courses. whenever the user must add courses, accept a comma-separated list of courses, and add each of them. o before adding the course, remove any whitespace around its name, and correct its capitalization. whenever the user must drop courses, accept a comma-separated list of courses, and delete each of them. o treat the names the same way as you add them and the comparisons will be easy. o you need to check for, and ignore, courses the user is trying to drop courses they are not taking! An electrician requires 250 energy saving light bulbs. He comes across four suppliers of these light bulbs. ELECTRA sells the light bulbs at R 123.00 each, with a R 350.00 delivery fee. ZZZ LIGHTING sells the light bulbs at R 140.00 with a 13% discount on the final amount, but with a R 260.00 delivery fee. SPARX sells the light bulbs at R 255.00 each with a buy one, get one free offer and no delivery fee. Finally, BRIGHTEX sells the light bulbs at R 190.00 each with a third off the final amount, and a delivery fee of R 100.00. Which supplier offers the best deal for the electrician? Do you feel the policies and treaties between Native Americans and the United States government regarding western lands were fair? Explain Find 18 and 90 using GCF prime factorization The car makes one complete rotation about its circuitevery 36 minutes, at a fairly constant rate. Through howmany degrees would the car, which starts from its originalposition, drives by the circuit from 8:00 AM to 3:00 PM,on the same day. 8. Which of the following best characterizes contemporary parties in America ?9. What is the most common challenges that people face in allocating public goods? which are forms of psychological abuse? select all that apply.