Answer:
Shield volcano
Explanation:
Shield volcanoes have broad and low bases while composite volcanoes have steep sides.
which of the following is a triggering mechanism for mass wasting? group of answer choices drought slope reduction excessive vegetation heavy rain
Major Triggers for Mass Wasting are Water, Slopes, Vegetation Removal & Earthquakes.
Moreover, Mass wasting events are triggered by changes that exceed slope angles and weaken slope stability, such as rapid snowmelt, intense rainfall, earthquake tremors, volcanic eruptions, storm surges, stream erosion, and human activity. The most common trigger is excessive rainfall. Mass wasting is influenced by slope, material strength, water content and amount of vegetation. Mass wasting can be caused by storms, earthquakes, eruptions, and human activity. Fall, slip, flow, and creep are the main categories of mass wasting mechanisms.
You can learn more about this at:
https://brainly.com/question/17071531#SPJ4
Why is it important to start seeing native Americans as “present day people”?
The historical backdrop of Local Americans is extraordinarily lengthy and huge, dating millennia and continuing after the pre-Columbian Time
.Understanding not only the present situation of Indigenous peoples but also that of our nation is dependent on knowing about this past.White Europeans and Native American Indian tribes fought a lot because of this mix of beliefs. For sure, Local Indians never claimed to adjust to those unfamiliar traditions and battle against them. Conflicts and wars were sparked when white Europeans took Indian land to make it productive. The diverse territory of New England is an illustration of these cultural differences and conflicts.
Indian tribes and white settlers in this part of North America thought and behaved very differently.While Indigenous Peoples preserve 80% of the world's remaining biodiversity, they own, occupy, or use only a quarter of the planet's surface area.They have important ancestral knowledge and expertise regarding climate adaptation, risk mitigation, and disaster risk reduction.
Learn about native americans:
https://brainly.com/question/24724492
#SPJ1
How do foreign recessions and depressions affect the Maquiladora industry?
Maquiladoras have not only become an increasingly significant component of the Mexican economy, they are also an important part of U.S. corporate strategy in producing competitively priced goods and services in the world marketplace.
Even though recessions and low-wage competition have changed the behavior of the industry in recent years, maquiladoras continue to shape regional trade along the U.S.-Mexico border.
What is Maquiladora industry?
The term “maquila” or “maquiladora” refers to a manufacturing facility that is a part of the maquiladora industry, a driving force in Mexico manufacturing. Maquiladora in Mexico first operated under a specific government program known as the Maquila Program, created in 1965 to facilitate industrialization on the United States-Mexican border.
A maquiladora is a low-cost manufacturing operation in Mexico that manufactures goods for export to the United States or Canada.
What is recession and depression?
A recession is widespread economic decline that lasts for at least six months. A depression is a more severe decline that lasts for several years. For example, a recession lasts for 18 months, while the most recent depression lasted for a decade. There have been 33 recessions since 1854.
Learn more about maquiladora industry here:
https://brainly.com/question/15022896
#SPJ1
is an imaginary plane, the height of the artist's eyes, parallel with the ground plane and extending to the horizon.
Eye level line is an imaginary plane, the height of the artist's eyes, parallel with the ground plane and extending to the horizon.
What is Eye level line?The horizon refers to the visual boundary that separates the sky from land or water. The viewer's actual eye level line when viewing an object, interior scene, or exterior scene.A higher eye level line when drawing in perspective draws more attention to the central and distant areas of the image. As a result, you're essentially looking down on them, limiting your view of nearby objects.They pointed in different directions. But the vanishing point is still on the same line, which is the line at eye level, or in this case the plane of the camera.Danny Morgan lines are small creases along the lower eyelid. These can lead to double folds of skin under the eyes. Also known as Danny Morgan wrinkles, these wrinkles have nothing to do with the natural aging process like wrinkles do.To learn more about Eye level line from the given link :
https://brainly.com/question/28168525
#SPJ4
find the areal scale for 1 cm to 2 km
Answer:
means 1 cm on the map represents 50,000 cm in real life. There are 100,000 cm in 1 km so we can think of this as 1 cm representing 0.5 km or as 2 cm representing 1 km.
so the answer is 200000
A scale of 1:50000 (or 1 in 50000) means that one centimeter on a map corresponds to fifty thousand centimeters along the actual ground. Thus, 1 centimeter is equivalent to 0.5 km.
What is areal scale ?AREAL-SCALE The relationship between areas on a map and the real world is known as areal scale. It is the root square of the equivalent area on an ellipsoid (A) on the map (a) in equation (Eq) (5). The distortions caused by map projection have no effect on areal scale.
Simply multiply the distance by the scale factor after measuring the distance on the photo (photo distance). Always keep in mind that scale is determined by the distance from the shot to the ground. An aerial image, for instance, has a scale of 1:15,000.
The scale of maps is known. Scale displays theratio of a projected coordinate system, such as the Universal Transverse Mercator, to a distance on a map (UTM). However, this definition is constrained by the fact that various lines result in various scales. For users who may need an ideal scale—one scale reflecting the entire map—this frequently has drawbacks.
Learn more about areal scale here
https://brainly.com/question/24868544
#SPJ2
What was the Triassic period known for?
There was a lot of change during the Triassic Period. This time period saw significant changes in the variety and predominance of life on Earth, bookended by extinctions.
Describe the Triassic period?The worst extinction event to ever affect life on Earth (252-201 million years ago) marked the start of the Triassic Period.
One of the most important catastrophes in the history of our planet was the Permian-Triassic extinction catastrophe, sometimes referred to as the Great Dying, which occurred about 252 million years ago. The difference between both the Palaeozoic and Mesozoic eras is symbolised by it. It is still unclear what caused the Permian-Triassic extinction event. Many hypotheses have been put out, including an unidentified asteroid impact, large-scale volcanic eruptions within what is now Siberia, a release of methane from the ocean's depths, sea level change, rising aridity, or a composite of a number of these.Thus, extinction events dominate the definition of the Triassic, but the continents' locations at that time also play a significant role. Pangea was the lone supercontinent that existed.
To know more about the Triassic period, here
https://brainly.com/question/11049888
#SPJ4
suppose that you were a researcher trying to understand how rising levels of atmospheric co2 might affect ragweed plants, and thus seasonal ragweed allergies. what questions, hypotheses, and predictions might you want to study? complete the flow chart by selecting the hypothesis and predictions that follow from the question you're trying to answer. not all labels will be used.
Increased atmospheric CO₂ levels can affect ragweed crops:
Hypothesis (1): CO₂ levels affect ragweed pollen productionPrediction (a): Plants grown at higher CO₂ levels produce more pollenHypothesis (2b): CO2₂ levels affect the concentration of allergen protein in ragweed pollenPrediction (c): Plants growing at higher CO₂ concentrations produce higher levels of allergens.This question completes the diagram, let's see at the picture.
What is the difference between prediction and hypothesis?Differences between hypotheses and predictions, including Hypotheses, are only temporary conjectures that can be tested by scientific methods, hypotheses must be logical and by facts. Whereas a prediction is a statement made in advance about what is expected to happen next, in the order of events.
Learn more about prediction and hypothesis here https://brainly.com/question/551449
#SPJ4
Where is Moscow founded?
Evaluate how a reduction in the number of condensation nuclei in the troposphere would affect precipitation. Explain your reasoning.
Condensation nuclei provide the non-gaseous surface area required for water vapor to condense into cloud droplets. As the droplets coalesce, they grow larger and eventually fall off as a precipitate.
What is Condensation nuclei?Condensation nuclei, small airborne particles of solid or liquid that initiate the condensation of water vapor in the atmosphere. Its diameter ranges from a few microns to a few tenths of a micron.There are two main categories of condensation nuclei: Hygroscopic and hydrophobic. Hygroscopic nuclei are nuclei that “seek water”. Water vapor easily condenses on hygroscopic surfaces, even at relative humidity well below 100%. The most common types of condensation nuclei are salt crystals, particulate matter produced by burning fossil fuels, and dust kicked up from the Earth's surface.Condensation of water in the condensation nucleus begins at a certain height known as the cloud base or elevated level of condensation. Water molecules attach to the particles and form cloud droplets with a radius of about 20 microns or less.To learn more about Condensation nuclei from the given link :
https://brainly.com/question/3528374
#SPJ4
________ is the downslope movement of rock, regolith, or soil under the direct influence of gravity.
Mass movement is the downslope movement of rock, regolith, or soil under the direct influence of gravity.
Mass motion is defined as the process of material erosion, transport and accumulation occurring on both gentle and steep slopes, primarily due to gravity. Mass movements lead to the leveling and shaping of the landscape. Various types of mass movements occur, such as landslides and landslides.
Mass transfer, often called mass wastage, is the downward movement of a mass of surface material such as soil, rock, or mud. This mass motion usually occurs along slopes and mountains under the influence of gravity and can be very slow or very fast.
Learn more about Mass movement https://brainly.com/question/6068732
#SPJ4
Why are the middle latitude regions such as mediterranean areas, southern argentina, and southern australia projected to experience much less rainfall in the future?.
Due to subtropical region high-pressure bands moving further towards the low latitudes, middle-latitude regions like the Mediterranean region, Southern Argentina, and Southern Australia are expected to receive less rainfall in the future.
What is subtropical?To the north and south of the tropics are the subtropical zones, also known as the subtropical region. They span the middle latitudes between 23°26′10.7′′ and roughly 35° north and south, geographically forming a part of the temperate zones of both hemispheres. These latitudes are within the range of horses.
Vietnamese Northern regions in general and the nation's capital Hanoi in particular have subtropical regions.
The hot summers and mild winters with infrequent frosts that characterize subtropical climates are common. Most subtropical regions can be divided into two categories: humid subtropical climates, where seasonal rainfall is typically concentrated in the warmest months, such as Southeast China and the Southeastern United States, and dry summer or Mediterranean climates, where seasonal rainfall is concentrated in the cooler months, such as the Mediterranean Basin or Southern California.
To learn more about subtropical from the given link
https://brainly.com/question/14606358
#SPJ4
What happens when the s waves encounter the boundary between the lithosphere and asthenosphere?.
When the S-waves encounter the boundary between the lithosphere and asthenosphere they are either absorbed or reflected.
What is lithosphere ?The lithosphere refers to the outer solid of the Earth. The lithosphere consists of the fragile upper mantle and crust, the outermost layer of the Earth's structure. It is surrounded by the atmosphere above and the asthenosphere below. The lithosphere is the hard outer layer of the Earth and is made up of rocks and minerals. It consists of the entire crust and the upper part of the mantle. This layer of solid rock "floats" above the asthenosphere, a layer of plastic-like rock at the top of the mantle. The lithosphere is the outermost layer of the Earth, consisting of the crust and the fragile portion of the upper mantle. The literal meaning of lithosphere is land. It consists of three main layers: crust, mantle, core.To learn more about lithosphere from the given link :
https://brainly.com/question/14631600
#SPJ4
how is air pollution transported? what natural processes do scientists need to consider when studying air pollution?
Air quality is affected by natural processes. Pollutants can be transported by wind from their source to distant locations.
How does air pollution get around?The effects of natural processes on air quality. Pollutants can be transported by wind from their source to distant regions. Pollutants can be removed from the atmosphere by precipitation. The transport of pollutants away from their sources and the emergence of secondary pollutants are predicted by scientists using computational models.Transport, dispersion, and deposition are the three processes that cause contaminants to move around in the atmosphere. Transport is movement brought on by a wind flow over time. Local turbulence, or motions that last for a shorter period of time than the transport average, leads to dispersion.Over the last ten years, various field and modelling studies have been used to study the intricacies of the transport and dispersion of airborne contaminants related to vehicle emissions.To learn more about air pollution refer :
https://brainly.com/question/9420026
#SPJ4
How have industrialization and urbanization changed China?
Check all that apply.
A. They helped the migration from cities to rural areas.
B. They turned China into a world economic power.
C. They transferred wealth to more people.
D. They created more unhealthy and polluted conditions.
Answer:
B. They turned China into a world economic power.
Explanation:
There is no other "Check All that Apply" cause there is not other choice that works best.
PLEASE GIVE BRAINLIEST THANK YOU!!!
They turned China into a world economic power to have industrialization and urbanization changed China. Hence, option B is correct.
What is industrialization and urbanization?Urbanization, defined as the expansion of cities in terms of both population and physical size, was sparked by industrialization, which is defined as manufacturing in factory settings using machines and a work force with distinct, split roles to increase production.
An agrarian economy becomes a manufacturing economy through the process of industrialization. Manual and specialized employees are replaced by assembly lines and mass production. In the past, this process has sparked urbanization by generating economic expansion and employment possibilities that entice people to live in cities.
Urbanization is the process of a rural population moving into an urban location, whereas industrialization is the process of turning any society into an industrial society.
Thus, option B is correct.
For more information about industrialization and urbanization, click here:
https://brainly.com/question/2563024
#SPJ2
on the map above where is the anatolian plateau located
Overproduction results in offspring with _[blank 1]_. Some of these offspring are better at surviving and will prosper, while others are not and will die off. In this way, each generation has genes that _[blank 2]_.
Answer: the survival rate of the most adapted and fittest organism increases and others which are weak will struggle for survival and may die.
Explanation: I think you have to look at some video about offspring and how they produce they that i did i am in environmental sciences.
which atmospheric layer contains the protective ozone layer? exosphere stratosphere thermosphere troposphere
The atmosphere is defined as a layer of gas that surrounds a planet like Earth, from the surface of the planet to deep in space with a thickness of about 1000 KM. Based on these problems, the layer of the atmosphere that contains a protective ozone layer is the stratosphere.
Explanation of the atmosphereThe atmosphere is defined as a layer of gas that surrounds a planet like Earth, from the surface of the planet to deep in space with a thickness of about 1000 KM. The function of the atmosphere is to regulate the process of entering sunlight into the earth by absorbing and reflecting back the heat emitted by the sun. There are other functions of the atmosphere, including:
As a protector of the earth so that the temperature on earth is maintained and the humidity of the air is also stable.Minimizes the heat given off by the sun.Keeps Earth's gravity stable.The atmosphere on Earth has different types of layers with different characteristics. The following are types of atmospheres:
The troposphere is the layer that is directly related to the earth's surface and is the place where weather phenomena or events occur.The stratosphere is a layer that protects living things from ultraviolet (UV) rays because the stratosphere is where the ozone layer is protected.The mesosphere is defined as a layer in which meteoroids fall to the earth.The thermosphere layer is the layer where the ionization process occurs, where positive ions are formed and free electrons are negatively charged.The exosphere is the outermost and topmost layer of the atmosphere.Learn more about the atmosphere at : brainly.com/question/24925283
#SPJ1
the ice-age hypothesis developed from ______.
The ice-age hypothesis developed from the theory of the Ice Age.
An ice age is an extended period of time during which the temperature of the Earth's surface and atmosphere decreases and continental and polar ice sheets and alpine glaciers existed or expanded.
The Earth's climate alternates between ice ages and greenhouse periods when there are no glaciers on Earth. An ice age is a long period (millions to tens of millions of years) during which the earth's temperature was relatively cold and much of the earth was covered by continental ice sheets and alpine glaciers.Learn more about Ice Age here: https://brainly.com/question/7387582
#SPJ4
Should oil exploitation be banned in areas of natural beauty?
Yes, oil exploitation should be banned in areas of natural beauty.
Exploitation of natural resources is the use of natural resources for economic growth, sometimes with a negative result of conducting environmental degradation. Increasing population in world has compelled humans to exploit natural resources to meet economic needs or in economic growth.
History says that oil and gas development on public lands has damaged ecosystems, harmed species, and contaminated soil, air, and water. The construction of drilling facilities fragments public lands, displacing wildlife and destroying habitat, while oil spills, fires and other pollution can contaminate surface and ground water.
Roads built for drilling increase human activity in formerly undisturbed areas and can lead to increased poaching, litter, roadkill and human-caused fires; and they facilitate the spread of exotic species that replace native plants and animals. Most specifically, oil and gas development creates our dependency on fossil fuels, committing the people and their public lands to more greenhouse gas emissions and global warming.
Therefore, the answer is yes.
To know more about exploitation, click below-
https://brainly.com/question/11321194
#SPJ1
The theory of plate tectonics says that are
The theory of plate tectonics contends that the lithosphere, the planet's outer shell, is divided into a number of plates that move across the rocky interior of the planet and on top of its soft core. In contrast to the Earth's mantle, the plates behave like a solid, rigid shell.
What is plate tectonics?Massive fragments of the Earth's upper mantle and crust make up tectonic plates. They are composed of both continental and oceanic crust. Around mid-ocean ridges and significant faults that form plate boundaries, earthquakes happen.
Cooler portions of the Earth's crust were driven downward into the warmer upper mantle beginning roughly 4 billion years ago, eroding and weakening the surrounding crust.
Thus, The theory of plate tectonics contends that the lithosphere, the planet's outer shell.
For more information about plate tectonics, click here
https://brainly.com/question/19317822
#SPJ1
g suppose a satellite (not the moon) orbits earth exactly every 30 days. find its distance from earth center in meter.
The distance of the satellite (not the moon) from the center of the earth with an orbital period of 30 days is 4.1 x 10⁸m.
How can we find its distance?Well, first of all we know that the time period of a satellite orbiting around a planet of mass M is given by [tex]T=2\pi \sqrt{\frac{r^3}{GM} }[/tex].
r from the formula is represent as distance of the satellite from the center of he planet, and G is the universal gravitational constant, and M is mass given by.
Then we can know about the distance from center of earth by following the formula:
T = 30 days = 30 × 24 × 60 × 60s = 2,592,000s
[tex]2,592,000 = 2\pi \sqrt{\frac{r^3}{6.67 x 10^{-11}x 5.97 x 10^{24} } }[/tex]
r = 4.1 × 10⁸m
And so there we have it, the answer is 4.1 x 10⁸m.
Learn more about distance of the satellite from the center of earth value here: brainly.com/question/13852075
#SPJ4
he differences among the three types of seismic waves: p-waves, s-waves and surface waves with respect to the pattern of motion and speed. which one causes the greatest destruction to buildings? why?
The three types of seismic waves that cause the greatest damage to buildings are P waves, which have a high speed so they can damage buildings.
EEkplantion
Seismic waves are caused by the sudden movement of materials within the Earth, such as slip along a fault during an earthquake.
There are three basic types of seismic waves – P-waves, S-waves and surface waves. P-waves and S-waves are sometimes collectively called body waves.
Learn more about
seismic
Wet igneous rock melts at a lower temperature than the dry version of that same rock because.
Wet igneous rock melts at a lower temperature than the dry version of that same rock because the addition of volatiles in "wet" rocks lowers their melting temperature.
What are igneous rock?
One of the three primary rock types, along with sedimentary and metamorphic rocks, is igneous rock, also known as magmatic rock. When lava or magma cools and solidifies, igneous rock is created. The partial melting of pre-existing materials in the mantle or crust of a planet can produce the magma. Based on their chemical makeup, igneous rocks can be categorised into four groups: felsic, intermediate, mafic, and ultramafic. Magma, or melted rock material, is found underneath the surface of the Earth and is the source of igneous rocks. When magma from deep inside the Earth rises to the surface or is pushed upward by a volcano as lava and ash, igneous rocks are created. It crystallises into rock here when it cools.
Hence, Wet igneous rock melts at a lower temperature than the dry version of that same rock because the addition of volatiles in "wet" rocks lowers their melting temperature.
To know more about igneous rocks click,
https://brainly.com/question/18297174
#SPJ4
During wastewater treatment, which of the following steps will happen after organic matter is broken down by bacteria in aeration basins?
Primary clarifiers allow greases and fats to rise.
Disinfection treats and purifies the water.
Bar screening physically removes large objects.
Grit screening allows large particles to settle.
The correct answer is bar screening physically removes large objects or secondary clarifiers in wastewater treatment.
Clarifiers operate on the settling principle of gravity. Due to the quiescent circumstances offered in the Clarification zone, the heavier suspended materials settle in the clarifier. With the aid of moving scraper blades, the settled solids are swept to the center well designed for collecting sludge.
The secondary clarifiers eliminate wastes and suspended solids from the biological contactor units' rotating effluent. By allowing the wastewater to pass through the clarifiers at a slower speed than necessary for the larger particles to settle out, the settleable solids are removed.
To separate biological floc from the treated liquid waste stream, supplementary clarifiers are used. Most frequently, secondary clarifiers are addressed in combination with biological wastewater treatment systems for suspended growth.
To know more about 'wastewater treatment' related questions
visit- https://brainly.com/question/25151459
#SPJ1
What is the outcome of hotspots? question 4 options: formation of island chains constant volcanic eruptions divergent boundary creation transform boundary creation
The outcome of hotspots is B)constant volcanic eruptions. So, correct option is B.
A hotspot is the huge plume of heated mantle layer that rises from the planet's interior. The Tectonic plate borders have no bearing on where a hotspot is located on the surface of planet. Similar to how a line of melted wax appears when a sheet of the parchment paper is slowly dragged over a burning candle, a line of the volcanoes develops as a plate moves over a hotspot.
These same "hotspot" volcanoes are formed when the slender stream of hot crust rises up from the core of the earth and melts the fissure in the plate to allow the magma to seep upward. Continuous volcanic outbursts are the result of the hotspots. When one of the Earth's plates passes over an abnormally hot region of mantle, hotspots develop.
To know more about hotspots, visit here:
https://brainly.com/question/4309840
#SPJ4
(Complete question) is:
What is the outcome of hotspots? options are:
A)formation of island chains
B)constant volcanic eruptions
C)divergent boundary creation
D)transform boundary creation
8. folds are examples of deformation while faults or fractures are types of deformation. a. brittle, ductile b. ductile, brittle the axial trace (also known as fold axis) is the imaginary line that divides a fold in half. notice when the units are dipping away from each other they form a structure called an antiform. notice when the units on either side of the axial trace are dipping towards each other, they form a synform. 9. anticlines have the unit in the middle of the fold. a. oldest b. youngest 10. synclines have the unit in the middle of the fold. a. oldest b. youngest
b)Folds are examples ductile of deformation while faults or fractures are types brittle of deformation.
Folds are bends in rocks caused by compressional pressures. Tensional forces along which rock displacement occurs cause deformation. When compressional force is applied to ductile or flexible rocks, folding results.
Rocks folded into an arching upward and dipping away from the fold's center are called anticlines. The youngest rocks are draped over the oldest, which are located in the center of an anticline. An adome is a structure formed when rocks arch upward to form a circle. So the correct option is a.
A syncline is a fold in the ground where the oldest rocks are on the outside and the youngest rocks are on the inside. A basin is created when rocks bend downward in a circular pattern. So the correct option is b.
For more questions like Fold click the link below:
https://brainly.com/question/29416697
#SPJ4
Trellis and annular drainage patterns are similar in that they are both structurally controlled. How do they differ? A trellis pattern follows ___.
An annular pattern follows curving layers around a centre location, and a trellis pattern follows one structure before cutting across a ridge and following another.
A stream is any body of moving surface water, from a small trickle to a powerful river. The drainage basin of a stream is the region from where the stream's water originates. Unless part of the water is able to traverse into a neighbouring drainage basin via groundwater movement, all precipitation (rain or snow) that falls within a drainage basin eventually flows into its stream.
The type of rock underlying and the structures inside that rock have a significant impact on the arrangement of tributaries within a drainage basin (folds, fractures, faults, etc.).
To know more about Rocks, click here:
https://brainly.com/question/19930528
#SPJ4
A rapid temperature increase about 55 mya created tropical conditions around the world. What did these conditions cause?.
A rapid temperature increases about 55 mya created tropical conditions around the world causes adaptive radiation of Euprimates.
Previously known as the "Initial Eocene" or "Late Paleocene thermal maximum" the Paleocene-Eocene thermal maximum (PETM), also known as "Eocene thermal maximum 1" (ETM1), was a period of time when the global average temperature rose by more than 5-8° C throughout the event.
it has been calculated that the related period of significant carbon emission into the atmosphere lasted between 20,000 and 50,000 years. it took the entire warm era almost 200,000 years to complete. the earth's temperature rose by 5-8 °C.
To know more about Temperature, click on the link below:
https://brainly.com/question/24746268
#SPJ4
A rapid temperature increases about 55 mya created tropical conditions around the world causes adaptive radiation of Euprimates.
Previously known as the "Initial Eocene" or "Late Paleocene thermal maximum" the Paleocene-Eocene thermal maximum (PETM), also known as "Eocene thermal maximum 1" (ETM1), was a period of time when the global average temperature rose by more than 5-8° C throughout the event.
It has been calculated that the related period of significant carbon emission into the atmosphere lasted between 20,000 and 50,000 years. it took the entire warm era almost 200,000 years to complete. the earth's temperature rose by 5-8 °C.
To know more about Temperature, click on the link below:
brainly.com/question/24746268
#SPJ4
Which diagram accurately represents the relationship between supply,
demand, and price of a product?
Answer:
I would say its either C or D
Explanation:
Which of the following religions is appropriately matched with its region of origin?
Answer:
Buddhism…India
Explanation:
Answer:
Hinduism - India
Buddhism - Southeast Asia
Judaism - Middle East
Christianity - Europe
Hinduism - India