Answer:
Non-metals are brittle. ...
Non-metals are bad conductors of heat and electricity (except graphite).
Non-metals are non-lustrous (dull) and cannot be polished (except iodine).
Non-metals may be solids, liquids or gases at room temperature.
Non-metals are neither tough nor strong.
Thing in common of non- metals are :
The elements that absorb or gain electrons to get negative ions square measure referred to as non-metals. In their outmost shell, non-metals typically have four, 5, half dozen or seven electrons.
High inclination and high ionisation energies square measure characteristics of non-metals.
Because of these characteristics, non-metals ofttimes gain electrons after they move with different substances to make valence bonds.
Non-metals often have smaller atoms than do metals. The atomic sizes of non-metals determine a number of their other characteristics.
A high electronegativities are seen in non-metals. This indicates that non-metal atoms exhibit a significant propensity to attract more electrons than they would ordinarily have.
A high electronegativities are seen in non-metals. This indicates that non-metal atoms have a strong propensity to retain their existing electrons.
As opposed to non-metals, which can give up one or more electrons to metals relatively easily, metals can easily form positively charged ions and conduct electricity.
Very little electrical conductivity is displayed by non-metals.
To know more about non-metals click at
https://brainly.com/question/25465587
You need to use your separatory funnel for an extraction, but you notice that there is some residual water in it from when it was washed during the previous lab period. What should you do?.
In this situation, wash the separating funnel with soap and water once more before using it for the subsequent experiment and rinse the funnel with acetone into a waste container.
Separating funnels are employed in the extraction process and must be free of contaminants that could reduce the yield of the extraction. The funnel could be placed in a desiccation after being cleaned and rinsed to allow the water on the body to dry before being used for the following extraction procedure. Washing laboratory equipment before use irrespective of its state (whether it is clean or not) contributes to standard laboratory practices.
To learn more about extraction. Click, https://brainly.com/question/28742621
#SPJ4
1. 86 g h2 is allowed to react with 9. 70 g n2, producing 1. 24 g nh3. Part a what is the theoretical yield in grams for this reaction under the given conditions?.
1.86 g H₂ is allowed to react with 9.70 g N₂ producing 1.24 g NH₃. the theoretical yield in grams for this reaction under given conditions is 10.54 g.
The balanced chemical equation is given by :
N₂ + 3H₂ ------> 2NH₃
it is clear from the reaction that :
1 mole of N₂ react with 3 moles of H₂ to produced 2 mole of NH₃.
the molar mass of compounds are :
H₂ = 2 g/mol
N₂ = 28 g/mol
NH₃ = 17 g/mol
3moles of H₂ × 1 g/mol= 6 g
1 mole of N₂ × 28 g/mol= 28 g
2 moles of 2NH₃ × 17 g/mol = 34 g
now we have to find out the limiting reagent :
28 g of N₂ react with 6 g of H₂ , 9.70 N₂ will react with how much mass of H₂
mass of H₂ = (9.70 g of N₂ × 6 g of H₂) / 28 g of N₂
= 2.07 g
but 2.07 g H₂ is not available , only 1.86 g are available .so, H₂ is a limiting reagent.
The theoretical yield in the given case:
mass of NH₃ = (1.86 g of H₂ × 34 g of NH₃ ) / 6 g of H₂
= 10.54 g
Thus, 1.86 g H₂ is allowed to react with 9.70 g N₂ producing 1.24 g NH₃. the theoretical yield in grams for this reaction under given conditions is 10.54 g.
To learn more about theoretical yield here
https://brainly.com/question/1379589
#SPJ1
Where are chromatids found in a cell?
Answer:
During metaphase, the cell's chromosomes align themselves in the middle of the cell through a type of cellular "tug of war." The chromosomes, which have been replicated and remain joined at a central point called the centromere, are called sister chromatids.
Add to brainliest please!
A student is 159cm tall and weighs45.8kg what is the height in inches and weight in pounds ?
Height in inches is 62.6 inches and weight in pounds are 101 pounds
Height is a way to measure someone or something from base to top or head to toe
Here given data is student height = 159cm tall and weight is = 45.8kg
So we have to convert
Height in cm = height in inches
Weight in kg = weight in pounds
So, 1 inches = 2.45cm
Height = 159cm×1 inches/ 2.45cm
Height = 62.6inches
Now, 1kg = 2.2045 pounds
Weight = 45.8kg×2.2045 pounds/1kg
Weight = 101 pounds or lbs
Height = 62.6inches and weight = 101 pounds or lbs
Know more about height
https://brainly.com/question/16343989
#SPJ1
A volume of 293 mL of oxygen gas was collected at a temperature of 10°C and a pressure of 102 kPa. What
volume of oxygen would be collected at STP?
Volume of oxygen would be collected at STP is 293.3 ml
V1 = 293 mL
V2 = ?
P1 = 102 kPa
P2 = 100 kPa
T1 = 10°C = ( 273 + 10 ) = 283 k
T2 = 273 k
The Combined Gas Law combines Charles Law, Boyle s Law and Gay Lussac s Law. The Combined Gas Law states that a gas pressure x volume x temperature = constant
The combined gas law is an amalgamation of the three previously known laws which are- Boyle's law PV = K, Charles law V/T = K, and Gay-Lussac's law P/T = K. Therefore, the formula of combined gas law is PV/T = K, Where P = pressure, T = temperature, V = volume, K is constant.
P1V1/T2 = P2V2/T2
102 x 293 / 283 = 100 x V2 / 273
105.6 = 0.36 x V2
105.6/0.36 = 293.3
V2 = 293.3 ml
Hence, volume of oxygen would be collected at STP is 293.3 ml
Learn more about Volume here:
https://brainly.com/question/463363
#SPJ4
use le châtelier's principle to predict how the equilibrium for the weak base methylamine responds to the indicated changes. ch3nh2(aq) h2o(l)↽−−⇀ch3nh 3(aq) oh−(aq) δH∘rxn
In the given reaction chemical equilibrium;
adding KOH will equilibrium to the leftIncreasing the temperature will shift the equilibrium to the rightWhat is the statement of Le Chatelier's principle?Le Chatelier's principle states that for a chemical system in equilibrium if an external constraint is applied o the system, the equilibrium position will shift so as to annul the effect of the constraint applied to the system.
In practical terms, this principle implies that if the forward reaction of a system in equilibrium is endothermic and the backward reaction is exothermic, adding more heat to the system will shift the equilibrium position of the reaction to favor the forward reaction.
Considering the given chemical equilibrium, the forward reaction is endothermic and results in the formation of OH⁻ ions.
Therefore, the addition of more OH⁻ will shift the equilibrium to the left whereas, the addition of heat will shift the equilibrium to the right.
Learn more about chemical equilibrium at: https://brainly.com/question/13414142
#SPJ1
Complete question:
Use Le Châtelier's principle to predict how the equilibrium for the weak base methylamine responds to the indicated changes.
CH₃NH₂ (aq) H₂O (l) ⇄ CH₃NH₃⁺ (aq) + OH⁻ (aq) ΔH°rxn = 103 kJ/mol
1) adding KOH
2) Increasing the temperature
Can someone do questions, 1, 2 and 3 if possible please?
Mass of magnesium ribbon is 0.21 g.
Mass of oxygen gas reacts with magnesium is 0.11 g
Number of moles of magnesium is 0.00875
Number of moles of oxygen is 0.0068.
Ratio of moles of magnesium and oxygen = 1.2 : 1
The number of moles of a substance equals the ratio of its given mass in a chemical reaction to the mass of one mole of that substance. One mole of any substance equals Avogadro's number, that is, 6.023 × 10²³.
we know that mass of crucible and lid = 35.56 g
mass of crucible and lid and magnesium = 35.77 g
Thus mass of magnesium = 35.77 - 35.56 = 0.21 g
mass of crucible and lid and magnesium oxide = 35.88 g
thus, mass of oxygen = 35.88 - 35.77 = 0.11 g
Now, Number of moles of magnesium = 0.21/24 = 0.00875
Number of moles of Oxygen = 0.11/16 = 0.0068
Ratio of Number of moles of magnesium to Number of moles of Oxygen = 0.00875/0.0068 = 1.2 : 1.
To know more about number of moles visit the link:
https://brainly.com/question/26416088?referrer=searchResults
#SPJ1
It is 21,000 kilometers around the earth and the earth rotates in 24 hrs. How fast is it rotating
It is 21,000 kilometers around the earth and the earth rotates in 24 hr then 875 km/hrs fast is it rotating
Earth spins on its axis and earth takes one day one rotation on its axis
It is 21,000 kilometers around the earth rotates in 24 hrs and we have to find how many km/hr earth rotating = ?
So, distance = 21,000km
Time = 24 hrs
Speed = 21,000km/24 hrs
= 875 km/hrs
875 km/hrs fast is it rotating
Know more about earth
https://brainly.com/question/20663488
#SPJ1
A base has been added to water such that the concentration of hydroxide ions is 2.61 × 10–9 M. The solution has a temperature of 25°C (Kw = 1.0 × 10–14). What's the concentration of hydronium ions present in this solution?
Question 14 options:
3.83 × 10–6
1.79 × 10–8
2.57 × 10–6
4.42 × 10–7
The hydronium ion concentration, [H₃O⁺ ], of the solution is 3.83 * 10⁻⁶.
What is the hydronium ion concentration of a solution?The hydronium ion concentration of a solution is the concentration in mol/dm³ of the hydronium ions of a solution.
The hydronium ion is formed when a water molecule combines with a hydrogen ion as shown below:
H₂O + H⁺ ---> H₃O⁺
The hydronium ion concentration of a solution is also known as the hydrogen ion concentration of the solution or pH.
The product of the hydronium ion concentration of a solution and the hydroxide ion concentration of a solution gives the ion product of water.
[H₃O⁺ ] * [OH⁻] = Kw
where Kw = 1.0 * 10⁻¹⁴ M²
The hydronium ion concentration of the given solution can be calculated as follows:
[H₃O⁺ ] * [OH⁻] = Kw
[OH⁻] = 2.61 * 10⁻⁹ M
Kw = 1.0 * 10⁻¹⁴ M²
[H₃O⁺ ] = Kw / [OH⁻]
[H₃O⁺ ] = 1.0 * 10⁻¹⁴ M² / 2.61 * 10⁻⁹ M
[H₃O⁺ ] = 3.83 * 10⁻⁶
Learn more about hydronium ion concentration at: https://brainly.com/question/27586088
#SPJ1
The half-life of radium-226 is 1600 years. What fraction remains after 3200 years?
The leftover sample will be cut in half again.
4000 atoms⋅1/2=2000 atoms
after 3200 years
As a result, your initial sample of radium-226 will be reduced to 2000 atoms.
What is radium-226's half-life in years?Radium is created by the radioactive decay of uranium. Radiation intensity from radioactive materials reduces with time. The half-life is the time necessary for the intensity to diminish by one-half. Radium has a half-life of around 1,600 years.
Gamma radiation has the most energy of any kind of radioactive decay. Gamma radiation contains the greatest energy waves in the electromagnetic spectrum.
Radium is presently utilised to make radon, a radioactive gas that is used to cure some forms of cancer.
The historically significant transition of radium 226 into radon 222 by alpha particle emission is an example of alpha decay.
learn more about half-life of radium-226 refer
https://brainly.com/question/16591806
#SPJ10
Which element is most likely to experience an increase in radius?
A. Ca changing to Ca2+
B. Fe changing to Fe3+
C. Cl changing to Cl-
D. Li changing to Li+
Answer:
C. Cl changing to Cl-
Explanation:
Cl gains 1 electron, resulting in an increase in radius.
The other 3 give up electrons.
4(NO3)2
please explain, will give brainliest!!
_____________________________________________________________________________________________________________________
Find the concentration of sulfuric acid in mol/dm3 and g/dm3 given
that 25.0 cm3 of this solution reacts with 26.5 cm3 0.100 mol/dm3
sodium hydroxide solution in a titration
H2SO4 + 2NaOH → Na2SO4 + 2H2O
The concentration of sulfuric acid in mol/dm3 and g/dm3 would be 5.194 and 0.053 respectively.
Stoichiometric problemFrom the equation of the reaction, the mole ratio of the concentrated sulfuric acid and sodium hydroxide solution is 1:2.
Recall that: mole = molarity x volume
For 26.5 cm3 0.100 mol/dm3 sodium hydroxide solution, the number of moles of the solute in the solution can be calculated as:
26.5/1000 x 0.100 = 0.00265 moles
The equivalent number of moles of the concentrated sulfuric acid will be:
0.00265/2 = 0.001325 moles
Also, recall that:
Concentration in g/dm3 = mass/volume
concentration in mol/dm3 = mole/volume
For 0.001325, 25.0 cm3 sulfuric acid:
mass = 0.001325 x 98 = 0.12985 g
Concentration in g/dm3 = 0.012985/0.025
= 5.194 g/dm3
Concentration in mole/dm3 = 0.001325/0.025
= 0.053 mol/dm3
Hence, the concentration of the sulfuric acid in mol/dm3 and g/dm3 would be 5.194 and 0.053 respectively.
More on concentrations can be found here: https://brainly.com/question/10725862
#SPJ1
draw the structural formula of 2-bromo-3,3,4,4- Tetra methyl hexane
Answer:
hope it helps!! ..............
If a 5-kg bowling ball is projected upward with a velocity of 2.0m/s. What is the momentum?
What amount of force will that bowling ball have as it falls back to Earth?
The momentum of the bowling ball is projected upward with a velocity of 2.0 m/s is 10 kg m/s.
The amount of force will that bowling ball have as it falls back to earth is 10 N.
We know that,
The mass of the ball is 5 kgVelocity of the ball is 2.0 m/sMomentum is the product of speed of an object and its mass. This means that an object at rest has zero momentum since the velocity is also zero.
It is given as -
Momentum = Mass of an object x speed/ velocity
Momentum = 5 kg x 2.0 m/s
= 10 kg m/s
To calculate amount of force bowling ball have when it falls back to Earth is -
Force exerted by an object is equal to product of its mass and velocity.
The second law of motion states that change in momentum of the object is given by mass multiplied by the velocity, which is equal to force.
F = mv
where,
F = force
m = mass
v = velocity
and,
p = mv
where,
p = momentum
m = mass
v = velocity
Hence, the amount of force that bowling ball have as it falls back to Earth is 10 N.
To learn more about momentum,
brainly.com/question/11649409
#SPJ1
What types of atoms and bonds are in the molecule shown below?
H₁
H
H
C=C
C-H
\H
Н
H
OA. Carbon, hydrogen, oxygen, and only single bonds
OB. Carbon, hydrogen, and only double bonds
C. Carbon, and only single bonds
OD. Carbon, hydrogen, single bonds, and double bonds
functional group: an atom, or group of atoms (with specific connectivity), exhibiting ... contain only carbon-carbon and carbon-hydrogen single bonds.
What do you call a molecule with only H and C atoms?Organic Molecules: The study of the characteristics of carbon-based compounds is known as organic chemistry. Except for a few inorganic carbon molecules, all carbon compounds are organic. The carbon oxides, metal ion bicarbonates and carbonates, metal cyanides, and a few more substances are examples of inorganic carbon compounds.
Hydrocarbons:Only carbon and hydrogen atoms make up the simplest organic molecules. Hydrocarbons are pure carbon and hydrogen compounds.
Alkanes: Methane, or CH4, is the most basic hydrocarbon. This is the most basic hydrocarbon in a group. The carbon atom count in each subsequent member of the series is one more than in the one before it. Alkanes are this group of chemicals (CnH2n+2). The less dense ones are utilised as fuels and are gases. the centre ones
To be learn more about hydrogen refer to:
https://brainly.com/question/28937951?referrer=searchResults
#SPJ1
just because you don't know your direction doesn't mean you don't know have one.
yes I agree thank you for sharing
Which chemical leads to a pleasurable sensation when released in the brain, such as in response to nicotine?.
One of these neurotransmitters, dopamine, is released in the reward area of the brain and results in pleasurable feelings and an uplifted mood. More nicotine is required to feel good the more you smoke.
What is Nicotine ?The nightshade plant family naturally produces nicotine, an alkaloid that is widely used recreationally as a stimulant and anxiolytic. It is a medication meant to decrease withdrawal symptoms in smokers who desire to quit.
Nicotine is a highly addictive and dangerous drug. It might cause a rise in blood pressure, an increase in heart rate, and arterial constriction (vessels that carry blood). The hardening of artery walls, which may lead to a heart attack, is another potential effect of nicotine.Learn more about Nicotine here:
https://brainly.com/question/23382655
#SPJ4
suppose a hydrogen atom in the ground state absorbs a 10.7 nm photon. how much kinetic energy will the emitted electron have when it is far away from the nucleus?
Answer: cheting is not alllowed is this homework or not
Explanation:
Bobby is at a family reunion and
would like to know what the median
age is, of everyone present. Here
are the ages of everyone at his
reunion:
35, 2, 7, 33, 25, 70, 75, 40, 42, 12,
15, 7, 44, 20, 25, 3, 65, 62
What is the median?
Answer:
Median is 29.
Explanation:
add all them up and divide them
If a wave has a frequency of 4.89 x 10^12 Hz, what is the wavelength?
Answer:
4,890,000,000,000
Explanation:
To convert out of scientific notation, you would take the beginning number and move the decimal to the right 12 spaces.
(keep in mind that if the twelve was negative you would move to the left 12 spaces)
What happens after molecules interact with each other
Answer:
I think "they are held together by chemical bonds"
27. What pattern in the behavior of gases is shown from Step I through Step 3 of the figure?
Answer:
Boyle's law
Explanation:
0.46 g of a metal produced 0.77 g of metal oxide. a. b. 0.805 g of the same metal displaced 760 cc of H₂ gas at NTP from HCI. c. 1.26 g of water was formed by the union of 1.12 g of oxygen with hydrogen. Show that these data illustrate the law of reciprocal proportions.
The given examples depict law of reciprocal proportions.
Jeremias Ritcher put forward the law of reciprocal proportions in 1792. The ratio of the masses in which they do so is either the same or a simple multiple of the mass ratio in which they combine, according to the statement, "If two different elements combine independently with the same weight of a third element."
a. Metal oxide contains
M = 0.46 g.
O = 0.77−0.46 = 0.31 g
Therefore, weight of oxygen that combines with 1g of
Metal = 0.31/0.46 = 0.674 g
b. 0.82g of Metal liberates H₂ = 0.00009 × 760 = 0.068g
Thus, the weight of H₂ that will be liberated by 1g of
Metal = 0.068/0.82 = 0.083 g
According to (a) and (b) the ratio of the weight of O:H that combine with or is displaced by the same weight of metal is 0.674:0.083 or 8:1.
Again according (c ), 1.25g of water contains
O= 1.12g and
H 1.25 − 1.11 = 0.14g
Therefore, The ratio of O:H::1.11:0.14 or 8:1
Hence, that ratio being the same, the law of reciprocal proportions is illustrated.
To know more about law of reciprocal proportions visit the link:
https://brainly.com/question/24235139?referrer=searchResults
#SPJ1
how does a forest fire model the energy flow of combustion?
Explanation:
Plenary lecture paper
Combustion dynamics of large-scale wildfires
Author links open overlay panelLiuNaianXieXiaodong
https://doi.org/10.1016/j.proci.2020.11.006
Get rights and content
Under a Creative Commons licenseOpen access
Abstract
A fact often overlooked is that large-scale wildfires, although occurring infrequently, are responsible for the overwhelming majority of fire-related suppression costs, economic losses, and natural resources damages. Fortunately, the increasingly severe problems of large-scale wildfires worldwide have been receiving ever-growing academic attention. The high-intensity burning behaviors in wildfires stem from the significant interaction of combustion with heat transfer and atmospheric flow under complicated fuel, meteorology, and topography conditions. Therefore, mitigating measures against large-scale wildfire disasters have grown into a challenging research focus for combustion scientists. Research over the past century has resulted in incrementally enhanced insights into the mechanisms of combustion dynamics underlying the various erratic behaviors in large-scale wildfires, with theories and models of fire accelerations developed and validated. These advances are expected to improve the efficacy of large-scale wildfire predictions significantly. Nevertheless, the physical interpretation of the acceleration of large-scale wildfires is far from adequate and complete. This paper intends not to make a comprehensive review of the entire wildfire research field, but to depict an overall pattern of the essential factors that lead an initial small-scale spreading flame to a large-scale wildfire beyond control. It is outlined that the complicated transformation of fuel preheating mechanisms determines the growth of surface fire spread, while varied large-size flame fronts and unique spread modes induced in specific fire environments play an essential role in fire spread acceleration. Additionally, multiple fires burning and merging often act as crucial steps for accelerating surface fire spread, generating large-size flames, and triggering unique spread modes. These major potential factors strike the energy balance of a low-intensity wildfire and push it to a high-intensity state. Several issues regarding intensely burning behaviors in large-scale wildfires are selected for in-depth discussions, for which an overview of the progress and challenges in research is presented. It is concluded that the fundamental exploration targeted at developing application tools capable of dealing with large-scale wildfires remains at its early stages. Opportunities for innovation are abundant, yet systematic and long-term research programs are required.
Match the parts of the following chemical equation to the correct description.
CL2(g)+ALCl3(aq)-->__I2(aq)+___AlCl3(aq)
Column A. Column b
1.Cl2 + AlI3. a. Products
2.I2 + AlCl3. b. Shows which way the reaction progresses
3.(g) or (aq). c. Reactants
4.-->. d. State of Matter
PLEASE ANSWER QUICK
The parts of the chemical equation to the correct description are done below.
Column A Column B
1. Cl₂ + Ail₃ ----------- c. Reactants
2. I2 + AlCl3. ---------- a. Products
3. 3.(g) or (aq) --------- d. State of Matter
4. 4.--> -------------------- b. Shows which way the reaction progresses.
Chemical equations tell us the factors and/or compounds that can be reacting and the product(s) of the response. The coefficients on the materials in the response tell us the mole ratio or molecular ratio of the elements/compounds inside the reaction. A chemical equation is the symbolic representation of a chemical response in the form of symbols and chemical formulation.
Chemical equations are an efficient way to explain chemical reactions. This module explains the shorthand notation used to express how atoms are rearranged to make new compounds at some stage in a chemical reaction. It indicates how balanced chemical equations convey the proportions of each reactant and product concerned.
Learn more about chemical equations here:-https://brainly.com/question/11231920
#SPJ1
which one of the following statements is true? the rate of a zero order reaction is independent of concentration. for the first-order reaction a→b, doubling the concentration of a will result in an increase of the half-life. the unit for the rate of a reaction depends on the order of the reaction. for the zero-order reaction a→b, a plot of 1/[a] vs. time will produce a straight line. the rate of a zero-order reaction decreases as the reaction proceeds.
This circumstance frequently arises when an enzyme or a solid surface is used to catalyze a process (heterogeneous catalysis).
What is zero order reactions?The unit for the rate of reaction depends on the odder of the reaction .for the zero order reaction a→b,a plot of 1/⊂a⊃vs.time will produce a straight line. the rate of a zero order reaction decreases as the reaction proceeds
Zero-order kinetics is always a byproduct of the circumstances surrounding the reaction.The term "pseudo-zero-order reaction" is frequently used to describe processes that exhibit zero-order kinetics.Clearly, the exhaustion of a reactant prevents a zero-order process from continuing.Just before this moment, the reaction will switch to a different rate law rather of decreasing to zero as seen in the upper left.Zero-order rates might result from two general circumstances:Only a small portion of the reactant molecules are capable of reacting, and this portion is continuously refilled from the larger pool.This circumstance frequently arises when an enzyme or a solid surface is used to catalyze a process (heterogeneous catalysis).
To learn more about zero order reactions refer:
https://brainly.com/question/21663229
#SPJ9
Forsythia is __________, which is a type of a plant that loses its leaves each year.
A)
a savanna tree
B)
a winter tree
C)
a tropical tree
D)
perenial
E)
deciduous
Answer: The answer would be deciduous (answer E)
Explanation: A deciduous is a term which means “ Tending to fall off” or “falling off at maturity” in reference to trees and shrubs that seasonally shed leaves, usually in autumn (fall); to the shedding of petals, after flowering; and to the shedding of ripe fruit!
Answer:
Deciduous
Explanation:
The word deciduous has answer in itselfIt refers to a plant reaching its maturity of growth then tends to fall down Forsythia is such type of plant that follows deciduous manner and loses its leaves every year ,the leaves regain tooTwo different samples of matter are measured in each of these glass containers. Both of the containers show the same measure for both samples of matter. The samples most likely have which of these in common?.
Two different samples of matter are measured in each of these glass containers. Both of the containers show the same measure for both samples of matter. These samples have volume in common.
In chemistry, volume is defined as the three-dimensional space taken up by matter. Volume is measured in cubic meters.
If you were to put two different samples in a graduated glass container and both of them have the particular digit that shows their volume then it means their volume is the same and they take up the same amount of space irrespective of their chemical composition.
For example, if you pour the sample into a glass container and the number you get is 250 m³.
Then this 250 m³ refers to the volume of the sample.
In general, volume is measured as volume = mass/density and its SI unit is m³.
If you need to learn more about matter click here:
https://brainly.com/question/16982523
#SPJ4
Which type of reaction is Mg + 2NaF --> MgF2 + 2Na?
Combination
Single Replacement
Double Replacement
Decomposition
Combustion
The reaction Mg + 2 NaF --> MgF₂ + 2Na is a single replacement reaction; option B.
What is a chemical reaction?A chemial reaction is a srecation in which atoms of elements under chemical changes to form new products.
The various types of chemical reactions include:
CombinationSingle ReplacementDouble ReplacementDecompositionCombustionA single replacement reaction is a reaction in which a single atom or a radical replaces another atom or radical in a compouds.
For example, the reaction given below is a single replacement reaction:
Mg + 2 NaF --> MgF₂ + 2NaMg replaces N ain the compound NaF.
Learn more about single replacement reaction at: https://brainly.com/question/20216315
#SPJ1