Mechanical weathering mechanisms include pressure release, thermal expansion, frost and root wedging. Weathering that occurs mechanically is sometimes called physical weathering.
This is typically referred to as thermal expansion. The fractional change in volume or length per unit change in temperature can be referred to as thermal expansion. Typically, the linear expansion coefficient is used when dealing with a solid expansion. The force perpendicular to an object's surface that is delivered per unit area over that force is known as pressure (symbol: p or P). The gauge pressure, also known as gauge pressure, is the pressure in relation to the surrounding air pressure. To express pressure, a variety of units are employed.
Learn more about thermal expansion here
https://brainly.com/question/14092908
#SPJ4
The complete question is -
Thermal expansion, pressure release, and mineral, frost, and root wedging all are ________ weathering processes.
a domestic microwave oven, like you might use in your dorm room, operates at 2.45 ghz. what is the wavelength of this radiation in cm?
the wavelength of this electromagnetic radiation is 12.2cm.
Calculation :
The frequency, speed of light, and wavelength are interrelated with each other as:
fλ=c
f is 2.45GHz or 2.45∗10⁹Hz
λ=3∗10⁸/2.45∗10⁹
So, the wavelength of this electromagnetic radiation is 12.2cm.
Wavelength is the distance between identical points (adjacent peaks) in adjacent cycles of a waveform signal propagating in space or along a line. For wireless systems, this length is usually specified in meters (m), centimeters (cm), or millimeters (mm).
Learn more about wavelength here : https://brainly.com/question/10728818
#SPJ4
q2. is it possible for the particle undergoing tunneling to be found within the barrier, rather than on either side of it?
Yes, it is possible for a particle to be found within the barrier while undergoing tunneling.
This phenomenon is known as quantum tunneling. Quantum tunneling occurs when a particle tunnels through a barrier that is normally too high to be crossed by the particle's kinetic energy. This occurs due to the wave-like nature of particles, which allows them to go through barriers that are otherwise impenetrable.
The wave-like nature of particles allows them to penetrate the barrier, often with a probability greater than zero. This phenomenon is used in many applications in science and technology, such as in quantum computing, where quantum tunneling is used to tunnel qubits through the barrier of a logic gate.
For more questions like Quantum tunneling click the link below:
https://brainly.com/question/29855444
#SPJ4
describe how you could use a ray diagram to determine the location of the image of an extended object. such as a pencil.
A ray diagram is a tool used by physicists to explain or predict the behavior of beams of light as they pass through objects such as glass blocks or lenses.
A ray diagram is a diagram that strains the route that light takes so as for a person to view a factor in the photograph of an object. In the diagram, rays are drawn for the incident ray and the meditated ray.
Ray diagrams help us hint at the course of the light for the man or woman to view a point on the photograph of an object. The Ray diagram makes use of lines with arrows to symbolize the incident and reflected ray. It also helps us trace the direction in which the mild travels.
A mild ray is a line that is perpendicular to the mild's wavefronts; its tangent is collinear with the wave vector. light rays in homogeneous media are instant. They bend at the interface between two distinctive media and may be curved in a medium wherein the refractive index modifications.
Learn more about ray diagrams here:-https://brainly.com/question/23536244
\#SPJ4
The escape velocity from planet A is double that forplanet B. The two planets have the same mass. What is theratio of their radiation, rA/rB?
The ratio of their radius [tex]\frac{r_A}{r_B}[/tex] = 1/4 .
What is escape velocity?Escape velocity is the speed at which the sum of kinetic and gravitational potential energy of an object equals 0.
[tex]v_e_s_c[/tex] = [tex]\sqrt{\frac{2GM}{r} }[/tex]
where [tex]v_e_s_c[/tex] is escape velocity G is universal gravitational constant and M is mass of the object and r is distance of object.
let [tex]v_A[/tex] and [tex]v_B[/tex] be the escape velocity of the of planet A and planet B
so [tex]v_A = \sqrt{\frac{2GM}{r_A} }[/tex] -----(i)
and [tex]v_B=\sqrt{\frac{2GM}{r_B} }[/tex] ----(ii)
given [tex]\frac{v_A}{v_B}[/tex] = 2
=> [tex]\frac{v_A^2}{v_B^2}[/tex] = 4
=> [tex]\frac{r_B}{r_A}[/tex] = 4
so [tex]\frac{r_A}{r_B}[/tex] = 1/4
To know more about escape velocity click on below link:
https://brainly.com/question/14297933#
#SPJ4
Which of the following best describes an electromagnet?
Need a Hint?
A) permanent magnet
B) insensitive to electrical currents
C) unchanging magnetic properties
D) temporary magnet
An Electromagnet can be best described as a temporary magnet.
An Electromagnet is called a non permanent magnet or a temporary magnet.
It is called so because of its property of getting magnetized and demagnetized.
Electromagnet behaves like a magnet only in the presence of the electric current their magnetic properties disappear as soon as the current in them stops.
Electromagnet are used in various devices like headphones and loudspeakers, induction cookers, data storage devices MRI machines and magnetic locks.
To know more about electromagnets, visit,
https://brainly.com/question/12555869
#SPJ4
a small object of mass m on the end of a light cord. what is the tension in the cord when the object is at the lowest point of its swing
The tension in the cord when the object is at the lowest point of its swing is 3 mg.
The complete question is in the attachment. The small object moves from point A to point B. According to the law of conservation of energy
KE a + PE a = KE b + PE b
0.5 m₁ v₁² + m₁ g h₁ + 0.5 m₂ v₂² + m g h₂
At point A(0.5 × m × 0²) + (m × g × r) = (0.5 × m × v₂²) + (m × g × 0)
0 + mgr = 0.5 mv₂² + 0
v₂² = 2gr
[tex]v_2 \:=\: \sqrt{2gr}[/tex]
The object moves according to uniform circular motion. There is the centripetal force that works in the system. The forces acting on the object are weight force and tension force. According to Newton's second law for circular motion
Fc = mα
T - w = mv²/R
T - mg = mv²/R
m = the mass v = the velocity at the lowest point = v₂R = the radius = rg = the acceleration due to gravityT = mv₂²/r + mg
T = (m × 2gr ÷ r) + mg
T = 2mg + mg
T = 3 mg
Learn more about centripetal force here: https://brainly.com/question/29266223
#SPJ4
a boat floating in fresh water displaces a volume of water with a weight of 16,000n. if it floats in saltwater with density 1.17 times that of water, then the weight of saltwater displaced (in newtons) is:
Archimedes, on the other hand, states that the amount of water (equal to 16000N) will be reduced by 3% since seawater has a specific gravity that is roughly 3% higher than freshwater.
How much water does a boat move when it is in the water?900 000 metric tonnes of water are removed by it. 300,000 elephants would be the equal. The air inside a ship is significantly less dense than water. It floats because of that. The key concept is that the body "floats," which is the underlying presumption in this situation. According to the Archimedes Principle, for this body, vessel, or whatever it may be to float, it must move an equal amount of water.
To know more about Archimedes Principle visit:-
https://brainly.com/question/13106989
#SPJ4
Find the kinetic energy of arotating body with moment of inertia 0.003 kgm^2 and angula velocity of 0.6 radius
The kinetic energy of a rotating body with moment of inertia 0.003 kgm^2 and angular velocity of 0.6 radius per seconds is equal to 0.00054 Joules.
What is kinetic energy?In Science, kinetic energy can be defined as a type of energy that's possessed by a physical object or body, especially due to its motion or a change in velocity (acceleration).
How to calculate the kinetic energy of a rotating body?Mathematically, the kinetic energy of a rotating body with a given moment of inertia and angular velocity can be calculated by using the following mathematical expression;
K.E = 1/2 × I × ω²
Where:
K.E represents the kinetic energy of a rotating body.I represents the moment of inertia.ω represents the angular velocity measured in rad/s or rads⁻¹.Substituting the given parameters into the formula for the kinetic energy of a rotating body, we have;
K.E = 1/2 × 0.003 × 0.6²
K.E = 0.00054 Joules.
Read more on kinetic energy here: https://brainly.com/question/25803184
#SPJ1
Complete Question:
Find the kinetic energy of a rotating body with moment of inertia 0.003 kgm^2 and angular velocity of 0.6 radius per seconds.
if a person weighs 600 n and the surface area of the bottom of both feet combined is 200 cm2, what is the pressure
The pressure exerted by the person is found to be 3 N/cm².
The physical force applied to an object is referred to as pressure. It is the force that is dispersed over a unit area per unit of time perpendicular to the surface of an object. The formula used to calculate pressure is P=F/A where P is the pressure, F is force, and A is the area.
Given the force is 600 N and the area is 200 cm².
Then, the pressure is calculated as follows,
P = F/A
P = 600 N/200 cm²
P = 3 N/cm²
The answer is 3 N/cm².
To know more about pressure:
https://brainly.com/question/28396651
#SPJ4
a particle has potential energy u(x)=x+sin((2rad/m)x) as a particle moves over the range 0m≤x≤πm.
A particle has potential energy U(x)=x+sin ((2 rad/m) x) as a particle moves over the range 0 m \leq pi m The equilibrium positions in this range will be a=(pi/3), x=(2pi/3).
Potential energy and equilibrium are related in that the body's potential energy is lower in such an equilibrium.
In this case, the state generates a force that does not resist the displacement when a little distance displaces the body.
When the body shifts from its initial posture in such a situation.
Potential energy is a form of stored energy that is dependent on the relationship between different system components.
When a spring is squeezed or extended, its potential energy increases.
If a steel ball is lifted above the ground as opposed to falling to the ground, it has higher potential energy.
A particle has potential energy u(x)=x+sin 2 x
Now differentiating with respect to x.
[tex]\Rightarrow \frac{d u}{d x}=1+2 \cos 2 x \\\\[/tex]
for equilibrium point
[tex]\frac{d u}{d x}=0 \\\\\Rightarrow (1+2 \cos 2 x)=0 \\\\\Rightarrow \cos 2 x=-\frac{1}{2}[/tex]
[tex]$$\begin{aligned} \Rightarrow \cos 2 x=\cos \left(\pi-\frac{\pi}{3}\right) \\\Rightarrow 2 x=\frac{2 \pi}{3} \Rightarrow x=\frac{\pi}{3} \\\cos 2 x=\cos \left(\pi+\frac{\pi}{3}\right) \\\Rightarrow 2 x=\frac{4 \pi}{3} \Rightarrow x=\frac{2 \pi}{3}\end{aligned}$$[/tex]
Hence, a=(Pi/3), x=(2pi/3) is correct,
For more questions on Equilibrium: https://brainly.com/question/19340344
#SPJ4
The correct questions should be:
A particle has potential energy U(x)=x+sin ((2 rad/m) x) as a particle moves over the range 0 m [tex]\leq[/tex] pi m.
Where are the equilibrium positions in this range?
Check all that apply.
x=pi/6 m
x=pi m
x=(pi/2) m
x=(pi/3) m
x=(2/3) pi m
5. a capacitor is connected into a 1250-v, 1000-hz circuit. the current flow is 80 a. what is the capacitance of the capacitor?
QCS=QC1+QC2+QC3. When we cancel the charge Q, we get the formula 1CS=1C1+1C2+1C3, which contains the equivalent capacitance, CS, of three capacitors connected in series.
Any number of capacitors in a series network can be included in the generalization of this formula. The polarity of an AC current alternates between positive and negative on a regular basis. As the polarity of the current changes, capacitors are continuously charged and discharged, allowing AC current to pass through. A capacitor, as contrast to a battery, is a component of a circuit that temporarily stores electrical energy by dispersing charged particles between (often two) plates to produce a potential difference. A capacitor may charge more fast than a battery and can discharge its whole stored energy in a matter of seconds.
Learn more about capacitor here-
https://brainly.com/question/17176550
#SPJ4
compared to the velocity of a 400 hz sound, the velocity of a 200 hz sound through air is
A sound traveling through air at 200 Hz has the same velocity as one traveling at 400 Hz.
The source determines the frequency of the sound wave. However, the density of the medium and the bulk modulus are the only factors that affect the speed of the sound wave. When compared to the speed of sound at 400 Hz, the speed of sound at 200 Hz is therefore constant.
Air and water have different sound propagation rates. The speed of sound in air is around 343 meters per second under normal circumstances, while the speed of sound in water is approximately 1,480 meters per second. Fundamentally, a compression wave moving through a medium is what makes up normal sound.
Learn more about velocity Visit: brainly.com/question/25905661
#SPJ4
Correct Question:
Compared to the velocity of a 400 Hz sound, the velocity of a 200 Hz sound through air is __________.
a 1.5 kg block is sliding on a frictionless surface with a speed of 12 m/s when it crashes into a horizontal spring. the spring has a spring contstant of 2100 n/m. how far will the spring be compressed wehn the box's speed has been reduced to exactly half its speed?
The spring's compressed length before halting frictionless is therefore 0.40m.
(m2) (s–1) (s–1)
2 N kg m s2 (kg m-1) Take a test. 5. Scalars: mass, distance, and the labour required to extend the spring out of its equilibrium position are stored as elastic potential energy; vectors: displacement, velocity, acceleration, and force; The work required to extend the spring away from equilibrium is equal to the change in kinetic energy of the box. The spring is extended until the box stops moving; hence, the box's final kinetic energy is zero. The elastic potential energy used to compress the spring can be equated to the initial kinetic energy of the box to find the expression to compute the compressed distance using the law of conservation of energy frictionless.
The force required to create
To learn more about frictionless please click on below link
https://brainly.com/question/434969
#SPJ4
the force of gravity of one body exerts different strengths on opposite sides of another body. this differential gravitational force is called the
The differential gravitational force that one body exerts on opposite sides of another body is called gravitational torque.
Gravitational torque is a measure of the rotational force exerted by a gravitational field on an object. It is equal to the product of the gravitational force and the lever arm (the distance between the point of application of the force and the axis of rotation).
For example, consider a satellite orbiting a planet. The satellite experiences a gravitational force from the planet, which acts to pull it toward the planet. However, this gravitational force is not uniform over the surface of the satellite.
The side of the satellite closest to the planet experiences a stronger gravitational force than the side furthest from the planet. This differential gravitational force creates a gravitational torque on the satellite, which causes it to rotate about its axis.
Learn more about Gravitational torque here:
https://brainly.com/question/14825257
#SPJ4
The 20-kg crate is lifted by a force of F = ( 100 +{ 5t }^{ 2 }) NF=(100+5t 2)N, where t is in seconds. Determine how high the crate has moved upward when t = 3 s, starting from rest.
4.23 m is the height the crate can move in 3s.
At t = 0,
force F = 100 N.
the time taken to move upward is 3s
Since at this moment,
2 F = 200 N > W = 20(9.81) = 196.2 N2F=200N>W=20(9.81)=196.2N,
the crate will move at that moment force F is applied. Referring to the Free body diagram of the crate,
[tex]m(v_y)_1 + \sum\int\limits^{t_2}_{t_1} {F_y} \, dt=m(v_y)_2[/tex]
=> [tex]0+2\int\limits^t_0 {100+5t^2} \, dt-20(9.81)t=20v[/tex]
=>[tex]2(100t+\frac{5}{3} t^3)-196.2t =20v[/tex]
=> v={0.1667[tex]t^3[/tex] + 0.19 t} m/s
The displacement of the crate can be calculated by integrating
ds = v dt with the primary condition s = 0 at t = 0.
[tex]\int\limits^s_o \, ds =\int\limits^t_o {0.1667t^3+0.19t} \, dt[/tex]
=> s={0.04167[tex]t^4[/tex]+0.095[tex]t^3[/tex]}m
At time t = 3 s,
s=0.04167 ( [tex]3^4[/tex] ) + 0.095 ( [tex]3^3[/tex])
=> s = 4.23 m
To learn more about Displacement :
https://brainly.com/question/28689760
#SPJ4
what do you call a spring that escapes a confined aquifer via rock fracture and is under enough pressure to free-flow to the surface?
Artesian spring all a spring that escapes a confined aquifer via rock fracture and is under enough pressure to free-flow to the surface.
To keep the water from evaporating, aquitards must exist both above and below the aquifer. when a well is dug into the aquifer and the pressure surface is above the surface.
A pumpless water source known as an artesian well utilizes pipes to help pressurized subsurface water rise to the surface.
movement of saline water into freshwater aquifers in inland and coastal regions as groundwater is drained more quickly than it is replenished by precipitation
Learn more about to aquifer visit here;
https://brainly.com/question/14916917
#SPJ4
with the use of an example, fully and clearly discuss your understanding of the concepts of reversibility and irreversibility in a thermodynamic system. why do we study reversible thermodynamic systems?
The reversible process is the one that can be reverted back and an reversible process is the one that cannot back towards initial state.
In the field of thermodynamics the processes are defined as reversible or Irreversible.
Practically speaking, process is that one which occurs slowly slowly and reversible process is the one which occurs suddenly. Irreversible processes cannot be reverted back and reversible processes can be reverted back.
An example of reversible process is the change of state of water and an example of Irreversible process is the change in colour often iodine containing sample at the addition of starch.
We study the reversible processes in order to understand the thermodynamical perspective of the process and the energy change associated with the system.
To know more about thermodynamics, visit,
https://brainly.com/question/13059309
#SPJ4
what is the minimum amount of hydrogen gas, in grams, required to completely hydrogenate 18.0 kg of 2-butene?
The minimum mass of hydrogen gas required is 641.64 grams.
Hydrogenation is a chemical reaction between molecular hydrogen and another compound or element, usually in the presence of a catalyst such as nickel, palladium, or platinum. This process is commonly used to reduce or saturate organic compounds.
2-butene = C4H8
maximum hydrogenation = C4H10
then we require 2 H, that is 1 mol ofH2
2-butene +H2 --> butane
MW of butene = 56.106
mol of butene = mass/MW = 18000/56.106 = 320.8213mol
then we require 1:1 ratio
320.8213 mol of H2
mass = mol*MW = 320.8213*2 = 641.64 g of H2
Learn more about Hydrogenation here:
https://brainly.com/question/12833896
#SPJ4
when the first astronauts travel to mars they will be traveling for long periods of time with no external time cues. you would predict that the circadian rhythms for these astronauts would
Based on the provided information, it can be predicted that the circadian rhythms for the astronauts would be drift toward a slightly longer cycle. (Option A)
A circadian rhythm, also known as circadian cycle, refers to a natural, internal process that regulates the sleep–wake cycle and is repeated roughly every 24 hours. It can refer to any process that originates within an organism and responds to the environment. These natural processes respond primarily to light and dark and affect most living things. A zeitgeber refers to any external cue or environmental cue that synchronizes an organism's biological rhythms such as circadian rhythm, usually naturally occurring and serving to entrain to the Earth's 24-hour light/dark and 12-month cycles. Circadian rhythms that are expressed in the absence of any 24-hour signals from the external environment are called free running, which are slightly longer cycle than usual. Hence, in the absence of external cue, the circadian rhythms for the astronauts would drift toward a slightly longer cycle.
Note: The question is incomplete as it is missing options which are a. They would drift toward a slightly longer cycle. b. They would become sporadic and show no definite pattern. c. They would stay synchronized with a 24-hour cycle. d. They would become synchronized with the light pattern around Mars.
Learn more about Circadian rhythm:
https://brainly.com/question/1400580
#SPJ4
green light strikes a metal and electrons are ejected. yellow light results in no electrons. which color light would you expect to produce electron ejection in this metal?
The relationship between light frequency and wavelength is inverse. No matter how powerful, yellow light simply lacks the necessary energy per photon to excite any electron sufficiently to liberate it from the metal.
Since yellow and red light have longer wavelengths than green light and lower frequencies than green light, when yellow or red light strikes metal, no photoelectrons are produced. Yellow light makes a green thing appear green. Under cyan light, a red object seems to be black. Cyan light makes a blue thing appear blue. Red and green light are also present in yellow light, which likewise reflects both colors.
Learn more about wavelength here-
https://brainly.com/question/13533093
#SPJ4
which one of the following statements best explains why gases are not commercially sold by volume?
a. Gas volume is neligible
b. Gas volume is difficult to measure
c. Gas volume depends on the type of gas
d. Gases have comparitviely low densities
e. Gas volume depends on temperature and pressure
Due to the dependence of gas volume on temperature and pressure, gases are not commercially marketed by volume.
The space occupied by the gaseous particles under typical pressure and temperature circumstances is referred to as the volume of gas.
It has the symbol "V."
The symbol for volume in the SI is "litres," or "L".
When the gas is at normal temperature, a mole has a volume of 24 m3, or 24 000 cm3.
The molar volume of a gas is this quantity.
The body of lecture 18 is included in the material that follows. The Gas Laws, including the Ideal and Combined Gas Laws, as well as Charles', Boyle's, Avagadro's, and Gay Lussacs', are covered in this lecture.
The four primary characteristics of gases are related to one another by four main principles.
Learn more about Pressure here:
https://brainly.com/question/12357202
#SPJ4
The magnetic field is uniform over each face of the box shown in (Figure 1). Suppose B1 = 2 T, B2 = 2 T.Part AWhat is the magnetic field strength on the front surface?
[tex]B_{f}[/tex] = - 4T is the magnetic field strength on the front surface for the given details B1 = 2 T, B2 = 2 T .
In terms of direction, we know that by convention, the flux entering the surface is negative and the flux leaving the surface is positive.
Apply the following formula to all of the box's surfaces:
3T(2 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) =6* [tex]10^{-6}[/tex]T[tex]m^{2}[/tex] on the left surface
3T(2 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) = 6* [tex]10^{-6}[/tex] T[tex]m^{2}[/tex] for the right surface
-2T(2 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) = -4* [tex]10^{-6}[/tex] T[tex]m^{2}[/tex] top surface
-1T(2 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) = -2* [tex]10^{-6}[/tex] T[tex]m^{2}[/tex] bottom surface
-2T(2 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) = -2* [tex]10^{-6}[/tex] T[tex]m^{2}[/tex] back surface
Assume that the magnetic field strength on the front surface is [tex]B_{f}[/tex]
[tex]B_{f}[/tex]T(1 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) = [tex]B_{f}[/tex]* [tex]10^{-6}[/tex] T[tex]m^{2}[/tex] front surface
The net flux through all of the box's surfaces should be zero.
(6T +6T-4T-2T+BfT)([tex]10^{-6}[/tex][tex]m^{2}[/tex]) = 0
When we divide [tex]10^{-6}[/tex][tex]m^{2}[/tex] on both sides, we get:
12T-8T+[tex]B_{f}[/tex]=0
4T+[tex]B_{f}[/tex] = 0
[tex]B_{f}[/tex]= - 4T
On the front surface, the magnetic field strength is [tex]B_{f}[/tex] = - 4T.
Because it is negative, it indicates that the magnetic field is entering the front surface.
For more such questions on Magnetic field :
brainly.com/question/28104888
#SPJ4
if an object doubles its luminosity in 10 hours, how large can the emitting source of light be?
If an object doubles its luminosity in 10 hours, emitting source of light can be about 10 light hours across.
Luminosity, L, is a measure of the total amount of energy radiated by a star or other celestial object per second. This is therefore the power output of a star. A star's power output across all wavelengths is called its bolometric luminosity. A star's luminosity can be determined from two stellar characteristics: size and effective temperature. The difference between luminosity and apparent brightness depends on distance.
Since, the luminosity of the object doubles in 10 hours, emitting source of light can be about 10 light hours across.
learn more about luminosity:
https://brainly.com/question/14140223
#SPJ4
a heat engine uses a monatomic gas in a brayton cycle. part a what is the engine's thermal efficiency if the gas volume is halved during the adiabatic compression?
The engine's thermal efficiency if the gas volume is halved during the adiabatic compression is 24%
Any thermal cycle's efficiency is expressed as
[tex]$$\eta=1-\frac{T_c}{T_h}$$[/tex]
We know that for an adiabatic process
[tex]$$p V^\gamma=\text { const }$$[/tex]
From the first law, we may express pressure in terms of temperature.
[tex]$$\begin{aligned}& p V=n R T \\& \Rightarrow p=\frac{n R T}{V} \propto T V^{-1}\end{aligned}$$[/tex]
As a result, we have the following for an adiabatic process:
[tex]$$T V^{\gamma-1}=\text { const } .$$[/tex]
Let us now calculate a temperature ratio based on the volume ratio:
[tex]$$T_c V_c^{V-1}=T_h V_h^{\gamma-1}$$[/tex]
We get that
[tex]\frac{T_c}{T_h}=\frac{V_h^{\gamma-1}}{V_c^{\gamma-1}}=\left(\frac{V_h}{V_c}\right)^{\gamma-1}$$[/tex]
The Efficiency will be,
[tex]$$\begin{array}{r}\eta=1-\left(\frac{V_h}{V_c}\right)^{\gamma-1} \\\eta=1-\left(\frac{1}{2}\right)^{1.40-1}=24 \% .\end{array}$$[/tex]
To learn more about adiabatic process visit:https://brainly.com/question/14930930
#SPJ4
in a photoelectric effect experiment at a frequency above the cut-off frequency, the number of electrons ejected is proportional to
In a photoelectric effect experiment at a frequency above the cut off frequency the number of electrons ejected is proportional to the number of photons that hit the sample per second.
The photoelectric current is measured in relation to the intensity of the incident radiation at a specific frequency and potential between the metal plate and collector. It demonstrates that incident radiation intensity and photoelectric current are inversely correlated. The photoelectric current shows how many photoelectrons are released each second.
The idea of light as a wave cannot be used to explain the photoelectric effect. However, the particle nature of light, which can be visualized as a stream of electromagnetic energy-containing particles, can provide an explanation for this phenomenon. These particles of light are called as photons.
We can learn more about photoelectric effect here:
https://brainly.com/question/26465043#
#SPJ4
does the evidence you collected support or refute the claim objects with a larger mass will sink in water
If an object weighs more than an equal volume of water, it is more dense and will sink, and if it weighs less than an equal volume of water, it is less dense and will float.
Heavy objects sink and light objects go with the flow irrespective of their size, form or the type of cloth used to lead them to. A true floating item ought to be wholly above the floor of the liquid.
All objects, even those that drift, displace some water. Mainly, while located in water, an item sinks into the water until it displaces an quantity of water same to its very own mass. The extra mass an item has, the in addition it sinks.
Learn more about water here:- https://brainly.com/question/28734050
#SPJ4
what inductance must be connected to a 17 pf capacitor in an oscillator capable of generating 550 nm (i.e., visible) electromagnetic waves? comment on your answer.
The inductance that must be connected to a capacitor is 5* 10⁻²¹ H.
If f is the frequency and λ is the wavelength of an electromagnetic wave, we know the relation between them as v = f * λ
The frequency is same as the frequency of oscillation of the current in the LC circuit of the generator.
f = 1/(2π* √LC)
where, C is the capacitance
L is the inductance
So, λ/(2π* √LC) = c
Given that, λ = 550* 10⁻⁹ m
C = 17 * 10⁻² F
c is the speed of light
Making L as subject, we have
L = λ²/(4π² C* c²) = (550* 10⁻⁹)² / [4π²(17 * 10⁻²) (3* 10⁸)²] = 5* 10⁻²¹ H
To know more about inductance:
https://brainly.com/question/13112375
#SPJ4
A(n) 71.1 kg astronaut becomes separated
from the shuttle, while on a space walk. She
finds herself 58.5 m away from the shuttle
and moving with zero speed relative to the
shuttle. She has a(n) 0.681 kg camera in her
hand and decides to get back to the shuttle
by throwing the camera at a speed of 12 m/s
in the direction away from the shuttle.
How long will it take for her to reach the
shuttle? Answer in minutes.
Answer:
10.347
Explanation:
Ebo throw the ball at an initial velocity of 18m/ but thi time at an angle of 53 to the ground
a. Work at the velocity in component vector form
b. Why will the ball pend alonger time in the air than it did before. C. Calculate the range of the ball
The velocity is 6.52 m/s, and the velocity in component vector form is vcos.
"The pace at which an item changes its location" is described by a vector number known as velocity. Consider someone walking swiftly, one step ahead, one step back, and beginning each stride in the same place. Velocity is measured as a vector quantity. As a result, velocity is aware of direction. When calculating an object's velocity, the direction must be considered. A speed of 55 miles per hour does not provide enough information. To accurately represent the velocity of an object, the direction must be taken into account. Simply simply, the direction of the velocity vector describes the object's motion.
velocity in vector form
= vcos vector form
=18cos53 v
=16.52 m/s
Learn more about velocity here-
https://brainly.com/question/18084516
#SPJ4
a racecar traveling at a constant speed of 50 m/s drives around a circular track that is 500 m in diameter. what is the magnitude of the radial acceleration of the car?
The magnitude of the radial acceleration of the car 10m/sec²
Given Velocity v = 50m/sec
Diameter D = 500m
Radius r = 250m
Acceleration a = [tex]v^{2}[/tex]/r = 2500/250 = 10m/sec²
The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. In vector quantities, accelerations exist (in that they have magnitude and direction). [1] [2] The direction of the net force that is acting on an object determines its acceleration. Newton's Second Law[3] states that the sum of the effects of two causes determines the size of an object's acceleration:
The net balance of all external forces acting on that thing — magnitude is directly proportional to this net resulting force; that object's mass, depending on the materials out of which it is built — magnitude is inversely proportional to the object's mass.
Meter per Second Squared (m/s2) is the SI unit for acceleration. displaystyle, mathrm, tfrac, ms2, and
Learn more about Acceleration here:
https://brainly.com/question/12550364
#SPJ4