There are many units of pressure. The standard one is Pa. Express Pa using only the fundamental units of meters, kilograms and seconds. Explain.

Answers

Answer 1

Answer:

Pa = kg/m.s²

Explanation:

Pascal (Pa) is the S.I unit of pressure. The formula of pressure is given as follows:

Pressure = Force/Area

The S.I Unit for force is Newton (N) and for Area is (m²). Therefore, the S.I Unit of Pressure will be:

Pressure = N/m²

Therefore, it will be equal to Pascal (Pa)

Pa = N/m²

but, the formula for force is given by Newton's 2nd Law:

Force = (mass)(acceleration)

using S.I Units:

N = (kg)(m/s²)

Therefore,

Pa = [(kg.m/s²)/m²]

Pa = kg/m.s²


Related Questions

When rubbing two insulators together, the one that gets a positive charge has had:______.a) protons added. b) protons removed. c) electrons added. d) electrons removed.

Answers

Answer:

d) electrons removed.

Explanation:

Two insulators are electrically neutral, that is, the number of electrons and protons are equal. When one insulator is rubbed against another, electrons are removed from one of the insulators due their high mobility. The insulator which lost the electrons becomes positively charged while the one that gained the electron becomes negatively charged.

Therefore, when rubbing two insulators together, the one that gets a positive charge has had electrons removed.

A major contribution of Johannes Kepler to the development of modern astronomy was:________.

Answers

Answer:

The answer is  planetary motion

Explanation:

According to Johannes Kepler, the laws governing planetary motion

states that:

1. The orbit of a planet is an ellipse with the Sun at one of the two foci.

2. A line segment joining a planet and the Sun sweeps out equal areas          

   during equal intervals of time.

3. The square of a planet's orbital period is proportional to the cube of the semi-major of its orbit.

Johannes Kepler was a German astronomer, mathematician, and astrologer

Born: 27 December 1571, Weil der Stadt, Germany

Died: 15 November 1630

) Un círculo de 120 cm de radio gira a 600 rpm. Calcula: a) su velocidad angular

b) su velocidad lineal en la llanta

c) su periodo

d) su frecuencia

Answers

Responder:

20πrads ^ -1; 24πrads ^ -1; 0,1 seg; 10 Hz

Explicación:

Dado lo siguiente:

Radio (r) del círculo = 120 cm

600 revoluciones por minuto en radianes por segundo

(600 / min) * (2π rad / 1 rev) * (1min / 60seg)

(1200πrad / 60sec) = 20π rad ^ -1

Velocidad angular (w) = 20πrads ^ -1

Velocidad lineal = radio (r) * velocidad angular (w)

Velocidad lineal = (120/100) * 20πrad

Velocidad lineal = 1.2 * 20πrads ^ -1 = 24πrads ^ -1

C.) Período (T):

T = 2π / w = 2π / 20π = 0.1 seg

D.) Frecuencia (f):

f = 1 / T = 1 / 0.1

1 / 0,1 = 10 Hz

What feature of the sun is a section that is cooler than its surroundings

Answers

Answer:

sunspots looking dark

Sunspots are looking darker

Sympathy, Unproductive, Perspectives
Empathetic people try to look at things from different  _______
People with low empathy often are unable to understand others perspective and involve in   _____arguments.
_________  is when you feel sorry for the other person and there is  no urge, no impelling reason to be  feel others feelings.


Answers

Answer:

Empathetic people try to look at things from different  perspectives

People with low empathy often are unable to understand others perspective and involve in unproductive arguments.

sympathy is when you feel sorry for the other person and there is  no urge, no impelling reason to be  feel others feelings.

Explanation:

Which word describes a statement that has been accepted, tested, and supported by multiple sets of evidence? A. Hypothesis B. Theory C. Procedure D. Data

Answers

Answer:

Data

Explanation:

4. Describe how the velocity of an object changes if it undergoes uniformly acceleration motion. Can its direction change?

Answers

Answer:

n the case of linear motion, the change occurs in the magnitude of the velocity, the direction remaining constant.

In the case of circular motion, the magnitude of the velocity remains constant, the change in its direction occurring.

Explanation:

Velocity is a vector therefore it has magnitude and direction, a change in either of the two is the consequence of an acceleration on the system.

In the case of linear motion, the change occurs in the magnitude of the velocity, the direction remaining constant.

              [tex]a_{t}[/tex] = (v₂-v₁)/Δt

In the case of circular motion, the magnitude of the velocity remains constant, the change in its direction occurring.

                    [tex]a_{c}[/tex] = v2/R

In the general case, both the module and the address change

             a = Ra (  a_{t}^2 +   a_{c}^2)  

The velocity of an object changes if it undergoes uniformly acceleration

motion by considering if it is:

Positive constant accelerationNegative constant acceleration

What is Velocity?

This is the rate of change of an object's position with time. If the object has

positive constant acceleration, the slope goes upward while if it is a

negative constant acceleration, the slope goes downward.

The direction doesn't change as a result of the uniform speed and

direction that is involved.

Read more about Velocity here https://brainly.com/question/6504879

if an object is not accelerating, then one knows for sure that it is_____.​

Answers

The object is maintaining a constant velocity

If a person has a velocity of 5 meters per second, how much time will they take to travel 1.5 kilometers

Answers

Answer:

300 secs

Explanation:

Velocity is the change in displacement of a body with respect to time.

Velocity = Displacement/Time

Given velocity = 5m/s

Displacement = 1.5 km

Displacement = 1.5km * 1000 = 1500m

From the formula, Time = Displacement/Velocity

Time = 1500/5

Time = 300 secs

Hence the time it will take to travel 1.5km is 300secs

A white blood cell has a diameter of approximately 12 micrometers or 0.012 um a model represents its diameter as 24 um what ratio of model size

Answers

Answer:

The ratio of the model size is 1 : 2000

Explanation:

Given

Real Diameter =  0.012 um

Scale Diameter =  24 um

Required

Determine the scale ratio

The scale ratio is calculated as follows;

[tex]Scale = \frac{Real\ Measurement}{Scale\ Measurement}[/tex]

Substitute values for real and scale measurements

[tex]Scale = \frac{0.012\ um}{24\ um}[/tex]

Divide the numerator and the denominator by 0012um

[tex]Scale = \frac{1}{2000}[/tex]

Represent as ratio

[tex]Scale = 1 : 2000[/tex]

Hence, the ratio of the model size is 1 : 2000

Answer:

Explanation: The Answer Is D Two Thousand & The Number



A marble slides along a frictionless track at a constant speed u before encountering a section of the track that is covered with a thin layer of putty. The instantaneous velocity v of the marble as it slides past the putty, as a function of time t, is given byv(t)=u-bt+ct^3where t = 0 at the moment when the marble first comes into contact with the putty. As the marble exits the region covered in putty, the marble\'s instantaneous acceleration goes to zero. For u = 2.50 m/s, b = 3.55 m/s2, and c = 6.70 m/s4, calculate the length of the track that is covered with putty._______m

Answers

Answer:

x = 78.9 cm

Explanation:

The instantaneous velocity v of the marble as it slides past the putty, as a function of time t, is given by

[tex]v(t)=u-bt+ct^3[/tex]

u = 2.50 m/s, b = 3.55 m/s², and c = 6.70 m/s⁴

As the marble exits the region covered in putty, the marble\'s instantaneous acceleration goes to zero.

[tex]a=\dfrac{dv}{dt}\\\\a=\dfrac{d(u-bt+ct^3)}{dt}\\\\a=-b+3ct^2[/tex]

or

[tex]0-3.55+3\times 6.7t^2\\\\0=-3.55+20.1t^2\\\\t=\sqrt{\dfrac{3.55}{20.1}} \\\\t=0.42\ s[/tex]

Let x is the length of the track.

[tex]v=\dfrac{dx}{dt}\\\\\text{or}\\\\\int\limits_0^x {dx} =\int\limits^{4.2}_0 {vdt} \\\\x=\int\limits^{4.2}_0 {u-bt+ct^3} \, dt\\\\x=[ut-\dfrac{bt^2}{2}+\dfrac{ct^4}{4}]_0^ {0.42}\\\\\text{Putting limits}\\\\x=0.42u-\dfrac{b(0.42)^2}{2}+\dfrac{c(0.42)^4}{4}\\\\\text{Now, put values of u,b and c}\\\\x=0.42(2.5)-\dfrac{3.55\times (0.42)^2}{2}+\dfrac{6.7\times (0.42)^4}{4}\\\\x=0.789\ m\\\\x=78.9\ cm[/tex]

So, the length of the track that is covered with putty is 78.9 cm.

The length of the track is covered with putty is 0.789 m.

How do you calculate the length of the track?

The instantaneous velocity v of the marble as a function of time t is given below.

[tex]v(t)=u-bt+ct^3[/tex]

Where t = 0 at the moment when the marble first comes into contact with the putty. Also given that, u = 2.50 m/s, b = 3.55 m/s², and c = 6.70 m/s⁴.

Given that the acceleration = 0 as the marble exits the region covered in putty. The acceleration is the rate change in the velocity with respect to time.

[tex]a = \dfrac {dv}{dt}[/tex]

[tex]a = \dfrac {d(u-bt+ct^3)}{dt}[/tex]

[tex]a = -b + 3ct^2[/tex]

Substituting the values in the above equation, we get the time.

[tex]0 = -3.55 + 3 \times 6.70 t^2[/tex]

[tex]t^2 = 0.1766[/tex]

[tex]t = 0.42 \;\rm s[/tex]

Hence the time interval is t =0 to t = 0.42 seconds.

Let us consider that the length of the track is l. Then the velocity can be written as the function of length is given below.

[tex]v = \dfrac {dl}{dt}[/tex]

[tex]dl = vdt[/tex]

[tex]\int_{0}^{t}dl = \int_{0}^{0.42} vdt[/tex]

[tex]l = \int_{0}^{0.42} (u-bt+ct^3) dt[/tex]

[tex]l =[ ut-\dfrac {bt^2}{2} + \dfrac {ct^4}{4} ]_0^{0.42}[/tex]

Putting the value t = 0.42,

[tex]l = 2.50 \times 0.42 - \dfrac {3.55 \times (0.42)^2}{2} + \dfrac { 6.70 \times (0.42)^4}{4}[/tex]

[tex]l = 0.789 \;\rm m[/tex]

Hence the length of the track is covered with putty is 0.789 m.

To know more about velocity and acceleration, follow the link given below.

https://brainly.com/question/2437624.

How many Joules are absorbed by a pot of water with a mass of 600 g in order to raise the temperature from 30° C to 40° C? (The specific heat of water is 4.184 J/g°C) *

Answers

Answer:

25104 J

Explanation:

We are given;

Mass; m = 600 g

Change in temperature;Δt = (40 - 30) = 10°C

Specific heat of water; c = 4.184 J/g°C

Now, to find how many joules, we simply use the formula for quantity of heat.

Thus;

Q = mcΔt

Plugging in the relevant values to give;

Q = 600 × 4.184 × 10

Q = 25104 J

Quantity of heat = 25104 J

Find the height or length of these natural wonders in km, m, and cm.A. A cave system with a mapped length of 354 miles.B. A waterfall that drops 1,235.2 ft.C. A 21320 ft tall mountain.
D. A canyon with a depth of 6630 ft.

Answers

Explanation:

Some standard unit conversion are 1 mile = 1.609344 km, 1 ft.= 30.48 cm,

1 km= 1000 m or 1 m = 0.001 km and 1 m= 100 cm or 1 cm=0.01 m.

Now, use these values to convert the given lengths.

A. length of cave = 5 miles (given)

From standard value 1 mile = 1.609344 km

[tex]\Rightarrow[/tex] 5 miles = [tex]\times[/tex] 1.609344 km= 8.04672 km,

[tex]\Rightarrow[/tex] 5 miles =8.04672 [tex]\times[/tex] 1000 m= 8046.72 m [ as 1 km = 1000 m]

[tex]\Rightarrow[/tex] 5 miles = 8046.72 [tex]\times[/tex] 100 cm=804672 cm

B. Height of the waterfall = 1235 ft. (given)

1 ft.= 30.48 cm [ from standard value]

[tex]\Rightarrow[/tex] 1235.2 ft.= 1235.2[tex]\times[/tex] 30.48 cm=37648.896 cm,

[tex]\Rightarrow[/tex] 1235.2 ft.=37648.896 [tex]\times[/tex] 0.01 m =376.48896 m [ as 1 cm = 0.01 m]

[tex]\Rightarrow[/tex] 1235.2 ft.=376.48896 [tex]\times[/tex] 0.001 km =0.37648896 km [ as 1 m = 0.001 km]

C. Height of the mountain= 21320 ft. (given)

From standard value: 1 ft.= 30.48 cm

[tex]\Rightarrow[/tex] 21320 ft.= 21320 [tex]\times[/tex] 30.48 cm=649833.6 cm,

[tex]\Rightarrow[/tex] 21320 ft.=649833.6 [tex]\times[/tex] 0.01 m =6498.336 m [ as 1 cm = 0.01 m]

[tex]\Rightarrow[/tex] 21320 ft.=6498.336 [tex]\times[/tex] 0.001 km =6.498336 km [ as 1 m = 0.001 km].

D. Depth of canyon =6630 ft.

From standard value: 1 ft.= 30.48 cm

[tex]\Rightarrow[/tex] 6630 ft.= 6630 [tex]\times[/tex] 30.48 cm=202082.4 cm,

[tex]\Rightarrow[/tex] 6630 ft.=202082.4  [tex]\times[/tex] 0.01 m =2020.824  m [ as 1 cm = 0.01 m]

[tex]\Rightarrow[/tex] 6630 ft.=2020.824  [tex]\times[/tex] 0.001 km =2.020824  km [ as 1 m = 0.001 km].

Carbohydrates are the main building block of tissues and organs. True False

Answers

That statement is false.

Proteins are.

Answer:

That statement is false.

Proteins are.

Explanation:

The electric field is strongest where equipotential curves are:_______.A) closest togetherB) farthest apartC) most nearly straightD) most curvy

Answers

Answer:

A closest

Explanation:

This is because the electric field will be strongest or largestwhen the equipotential curves are closest together

We know that the field is

E= V/d

Where is distance and we see that d being the denominator will only make E bigger if it becomes smaller that is the curves closest

Question 4 of 10

Which option is part of designing a set of experimental procedures?

O A. Developing a hypothesis

B. Determining how data will be gathered

C. Submitting conclusions to the peer-review process

O D. Beginning to take measurements

Answers

Answer:

Determining how data will be gathered

Explanation:

As a scientist considers the use of a particular set of experimental procedures to carry out his research, an important consideration is the method of data collection.

The experimental procedures chosen must be those that make the process of data collection much easier, efficient and lead to collection of reliable data.

Hence determining the method of data collection is very important when designing a set of experimental procedures.

a graph compares the weight and height of several different breeds of cat. What type of model is the graph?

Answers

Answer: Mathematical Model

Explanation:

Took the test

A soccer ball is at rest. A player kicks the ball from the ground. What impact will the energy transfer have on the ball?

A. The ball will stay at rest

B. The ball will move forward

C. The ball will move backward.

D. The ball will stay in the same position.

Answers

Answer:

Its B

Explanation:

the force of the ball is being kicked from the back side of the ball will causes a pushing motion and the ball will move forward

B the ball will of course move forward since it is being kicked

How many coulombs of positive charge (in units of 107 C) are there 1.53 kg of plutonium, given its atomic mass is 244 and that each plutonium atom has 94 protons? 1 atomic mass unit = 1.66*10-27 kg Enter a number with two digits behind the decimal point.

Answers

Answer:

The value is   [tex]q =  5.72 *10^7 \  C[/tex]

Explanation:

From the question we are told that

  the mass is  [tex]m  =  1.53 \ kg[/tex]

      The  atomic mass is  [tex]u  =  244 g/mol =  0.244 kg/mol[/tex]

      The number of protons on each atom is [tex]N  =  94 \  protons[/tex]

       The mass of one atomic mass unit is [tex]M  = 1.66 *10^{-27} \  kg[/tex]

Generally the number of atoms present is  

       [tex]k  =  \frac{m *  N_a }{u}[/tex]

Here  [tex]N_a[/tex] is the Avogadro constant  with value [tex]N_a  =  6.023  *10^{23} \  atoms /mol[/tex]

=>    [tex]k  =  \frac{1.53 * 6.023*10^{23}}{ 0.244}[/tex]

=>   [tex]k  =  3.8 *10^{24} \  atoms[/tex]

The coulombs of positive charge on the plutonium is mathematically represented as

     [tex]q =  k *  N  *  e[/tex]

Here e is the charge on a proton with value [tex]e =  1.60 *10^{-19}\  C[/tex]

    [tex]q = 3.8 *10^{24} *  94 *  1.60*10^{-19}[/tex]

           [tex]q =  5.72 *10^7 \  C[/tex]

       

A train is moving at a constant speed on a surface inclined upward at 15.0° with the horizontal and travels 300 meters in 5 seconds. Calculate the horizontal velocity of the train at the end of 3 seconds.

Answers

Answer:

57,9 m/s

Explanation:

A train is moving at a constant speed on a surface inclined upward at 15.0° with the horizontal and travels 300 meters in 5 seconds. The horizontal velocity of the train at the end of 3 seconds is 100m/s.

The first formula we will use is:

v = d/t

300m ÷ 5s  = 60m/s

The last formula we will use is:

vh = v·cosx

60m/s·cos15.0°

60m/s · 0,965  = 57,9 m/s

Therefore, the answer is 57,9 m/s.

Hope this helped!

Answer:

57,9 m/s

Explanation:

velocity formula

v = d/t

= 300m/5s

= 60m/s

horizontal velocity formula

vh = v·cosx

= 60m/s×cos15°

= 60m/s×0,965

= 57,9 m/s

Barney walks 6 steps north, 4 steps to the west, 2 more steps north, and 10 more steps to the west. What is Barney's
displacement?

Answers

The magnitude of total displacement of  Barney  is 16.12 meters in an angle 29.75 ° with north in north east direction..

What is displacement?

The term "displacement" refers to a shift in an object's position. It is a vector quantity with a magnitude and direction. The symbol for it is an arrow pointing from the initial location to the ending place.

Given parameters:

Barney walks 6 steps north, 4 steps to the west, 2 more steps north, and 10 more steps to the west.

He walks = ( 6+2)steps towards north.

= 8 steps towards north.

He walks = ( 4 + 10 ) steps to the west

= 14 steps to the west.

The magnitude of his total displacement = √(8² + 14²) meters = 16.12 meters.

And the direction is = tan⁻¹(8/14) north east. = 29.75 ° with north in north east direction.

Hence, the magnitude of total displacement of  Barney  is 16.12 meters  in an angle 29.75 ° with north in north east direction..

Learn more about displacement here:

https://brainly.com/question/11934397

#SPJ2

what best describes the bromide ion that forms

Answers

Answer:

it A

Explanation:

Its a negative ion that hss one less valence electron than a netural bromine atom

What is the opposite of yummy??? PLEASE I GIVE BRainlIEST NO NOOBS PLZZ

Answers

Answer:

tasteless

Explanation:

the opposite of yummy is distasteful >:)

Tony completed a 720 km journey with an average speed of
90 km/h. For the first 285 km, he travelled at an average speed
of 95 km/h. What was the average speed for the remaining
journey?

Answers

Answer:

87 km/h

Explanation:

Assume the density of the sea water is 1.024x103 kg/m3 and the pressure at sea surface is 1.01x105 Pa. What is the total pressure at an ocean depth of 700 m.

Answers

Explanation:

imagine a column of water of 1 m² that starts at the surface of the ocean, which goes straight down 700m.

You need to calculate the pressure induced by only the column of water.

Please understand that the total pressure is found by adding the pressure of the column of water AND that of the pressure of the atmosphere.

p = F/A

p = pressure in Pa

F = Force in N

A = area in m²

To calculate the Force that gravity has on that column of water, you simply use:

F = m * g

where g = 9.81 kgm/s²

So first you need to calculate the mass of the column sea water with a density of 1.024*10³ kg/m³

A machine, modeled as a simple spring-mass system, oscillates in simple harmonic motion. Its acceleration is measured to have an amplitude of 10,000 mm/s2 with a frequency of 8 Hz. Compute the maximum displacement the machine undergoes during this oscillation.

Answers

Answer:

3.96*10^-3 m

Explanation:

Given that

Amplitude, A = 10000 mm/s² = 10 m/s²

Frequency, f = 8 hz

the maximum acceleration of a simple harmonic motion is given as

|a|(max) = Aw², where

A = amplitude of the simple harmonic motion

w = angular frequency of the simple harmonic motion

Remember, w = 2πf, so

w = 2 * 3.142 * 8

w = 50.272 rad/s

Rearranging the formula, and making a the subject, we have

A = |a|(max) / w², so that

A = 10 / 50.272²

A = 10 / 2527.27

A = 0.00396 m

A = 3.96*10^-3 m

What is true about all uranium atoms

Answers

Answer:

erm they all should have same numbers of protons

Answer:

They each have the same number of nuclear particles.

Explanation:

What is true about all uranium atoms? They each have the same number of nuclear particles. They each have the same number of neutral particles. They each have the same number of neutrons . Uranium is an element that is often used in nuclear power plants. I hope this helped :)

A world-class tennis player can serve a tennis ball at 130 mi/h mi/h (about 58 m/s m/s ). The length of a tennis court is 78 ft ft . Approximately how long does an opponent have to react from the instant the ball is served until the ball reaches the opponent?.

Answers

Answer:

The time taken is   [tex]t = 0.4103 \ s[/tex]

Explanation:

From the question we are told that

  The  speed is  [tex]v  =  130 \  mi/h =  58 \  m/s[/tex]

   The  length of the tennis court [tex]l =  78 \ ft = \frac{78}{3.281}= 23.8 \ m[/tex]

 Generally the time taken is mathematically represented as

      [tex]t =  \frac{ 23.8}{ 58}[/tex]

=>        [tex]t = 0.4103 \ s[/tex]

When you do work on an object some of the energy is ___ to that object

Answers

Answer:

The answer is transferred. So your answer will be: When you do work on an object some of the energy is transferred to that object.

You walk out of pace of 1.38 m/s for 7 minutes, how far do you travel in meters

Answers

Answer:

7 × 60 (minute to seconds) = 420 seconds

1.38 × 420 = 579.6m

Other Questions
Solve the equation A = bh for b.a) b = Ahb) b = A/hc) b = h/Ad) b = h A Name the three types of earthquake waves. Which set of numbers could be the side lengths of a right triangle?A. 3,4,6B.4,5,7C. 5, 12, 13D. 7. 20, 21E. 8, 15, 16 32- +7+ 5 +2 22 (30 points) the line contains the point (5,-7) and is parallel to 4x+ 3y =-9 The equation of the line is: 8)Solve for x.-3x - 8 = 10A)-54B)-6C)6D)554 what are the three different type of solution?explain them. What is the domain of the function graphed below? 2.2-2 Consider sorting numbers stored in array by first finding the smallest element n A of and exchanging it with the element in . Then find the second smallest A AOE1 element of A, and exchange it with . Continue in this manner for the firs AOE2 1 elements of A. Write pseudocode for this algorithm, which is known as selection sort. What loop invariant does this algorithm maintain? Why does it need to run for only the firs elements, rather than for all elements? Give the best-case n 1 n and worst-case running times of selection sort in -notation. Please select the word from the list that best fits the definition A set of letters that can be combined to form words Polytheis,epics,silt,chariot,surplus,architecture,empire,priest,cuneiform,Fertile Crescent,pictographs,scribe, alphabet ,rural,urban,irrigation,impact,monarch,role,canals, division of labor ,social hierarchy,city-state In the early 1800s, Native Americans were forced to move off their land _____________ a. as Americans moved west to farm and find resources. b. because they did not pay taxes. c. so they could tame the wilderness. d. to make way for the railroad. Please select the best answer from the choices provided A B C D for the past five baseball seasons miguel had 122 45 109 124 and 115 hits what is his median number of hits for the past five seasons Name 3 rays in this geometric constructionEADBYour answer Solve for y. 6 x + 2y = z 1. A rectangular block of aluminum metal has a mass of 2540 g. The block ofaluminum has dimensions equal to 9.4 cm, 8.7 cm and 11.5 cm. From the dataprovided, what is the density of aluminum? A company is looking to hire a lawyer. One law firm states that their legal fees can be determined using the expression 350x + 22,000, where x is the number of hours of legal assistance. A second law firm states that their legal fees can be determined using the expression 410x+16,000. The company president wants to know when the legal fees would cost the same for each law firm. What number of hours of legal assistance makes the equation 350x+22,000 = 410x+16,000 true? define constitution 13. What are some sources of error when measuring yarn? sita purchased 100 pencils of rs600. when she sold all the pencils she lost 20%. find the selling price of each pencils. Hello. This is irrelevant to the questions that have been being asked, but who likes Harry Potter Movies?