The type of bonding and the number of covalent bonds an atom can form with other atoms is determined by __________

Answer:

Explanation:

A. Periodic table is beautifully arranged to place elements with similar chemical properties together. A family or a group is a vertical column in periodic table that has elements with similar property.

B. They all have similar properties because they all have the same number of valence electrons that determine the chemical properties such as reactivity of the element.

C. Lithium, sodium, potassium all fall in group 1 called alkali metals and these elements all share the property of being some of the most reactive elements.

The atomic number is the number of protons in the nucleus of an atom and it directly affects the properties of an element. The atomic number also determines the element's place in the periodic table, which allows us to predict the properties of an element based on its atomic number.

As the atomic number increases, the number of protons in the nucleus increases and so does the atomic number. This increase in protons also increases the number of electrons in the atom. The number and arrangement of electrons in an atom directly affect its chemical behavior and thus the properties of the element.

The atomic number also determines the element's position on the periodic table, and elements with similar atomic numbers have similar chemical and physical properties. For example, elements in the same vertical row (group) have similar chemical properties, and elements in the same horizontal row (period) have similar electronic configurations of their atoms.

The atomic number also affects the reactivity of an element. Elements with lower atomic numbers tend to be more reactive than elements with higher atomic numbers.

Learn more about atomic number here: https://brainly.com/question/621740

#SPJ4

To solve this we must be knowing each and every concept related to  landslides. Therefore, the given process describe the landslides process.

Slope collapses are essentially natural calamities that occur in a variety of locations across the world. Slope failures, often known as landslides, define a wide range of mechanisms that produce the outward or downward of slope-forming materials such as rock, soil, or landfills.

The down-slope movement of material on Earth is called a slope failure. It is the failure of the slope resulting in transport of debris downhill by sliding, rolling, falling, or slumping. This is an example of slope failure called landslides.

Therefore, the given process describe the landslides process.

To learn more about landslides, here:

https://brainly.com/question/13151615

#SPJ1

The normal boiling point for acetone is 56.5°C. At an elevation of 5300 ft the atmospheric pressure is 630. torr. The vapor pressure of acetone at 22.0°C at this elevation is 212.22 torr.

The equilibrium pressure of a vapour above its liquid (or solid), or the pressure of the vapour produced by the evaporation of a liquid (or solid) above a sample of the liquid (or solid) in a closed container, is the vapour pressure of a liquid. Substance; vapour pressure at 25 °C, as examples.

In Step 1:

The normal boiling point for acetone = 56.5°C.

At an elevation of 5300 ft the atmospheric pressure = 630 torr

ΔHvap = 32.0 kJ/mol

The temperature is 24.0 °C

In Step 2:

ln(p1/p2) = (∆ H/R) (1/T2 - 1/T1)

Normal atmospheric pressure

= 1 atm

= 760 torr

So, (760/630) = ((32.000 J/mol) / (8.314 J/K*mol)) (1/T2 - 1/329.65 K).

T2 = 324.4 K = 51.25 °C.  

This is the boiling point of acetone at 5300 ft.

The vapor pressure = atmospheric pressure at the boiling point for any liquid.

ln (Pv/630atm) = ((32.000 J/mol) / (8.314 J/K*mol)) (1/324.4 K - 1/297.15)

ln (Pv/630) = -13615388.3

Pv = 212.22 torr

Thus, The vapor pressure of acetone at 22.0°C at this elevation is 212.22 torr.

To learn more about the vapor pressure, follow the link;

https://brainly.com/question/11864750

#SPJ1

sauce burning on a stove and firing a clay pot in a hot kilnBoth are physical changes. Therefore, option D is correct.

Physical changes can be defined as changes affecting the state of a chemical substance, but not its composition. Physical changes can be used to separate mixtures into their component compounds, but can not generally be used to separate compounds into elements or simpler compounds.

Physical changes takes place when substances undergo a change that can not change their composition. while the chemical change in which the composition of a substance changes when substances combine or break up to form new substances.

In general a physical change can be consideed as reversible using physical means. A physical change includes a change in physical properties such as change of strength, change of durability, textural change, shape, size, volume and density.

Learn more about physical changes, here:

https://brainly.com/question/17931044

#SPJ1

In comparison to non-polar hydrocarbon dielectrics like gasoline and diesel fuel, methanol is a polar substance like water and has a relatively high conductivity (conductivities less than 1 x 10⁴ pS/m).

Therefore, the self dissociation into ions for methanol and ethanol will be less strong than in water. But even in pure ethanol and methanol solutions, these ions will still exist and conduct electricity, albeit at very low conductivities.

Water's electrical conductivity is a measure of how well it can carry a current of electricity. The amount of electrical current that can be conducted in water increases with the concentration of dissolved charged chemicals, also referred to as salts.

To know more about electrical conductivity visit:

https://brainly.com/question/29765686

#SPJ4

To solve this we must be knowing each and every concept related to mutation and types of mutations. Therefore, the correct option is option C.

A mutation is, at its most basic, a change or alteration. Chromosome and gene alterations, known as mutations in biology, frequently appear physically.

One grizzly bear population has moved to an area that has snow year-round. If a mutation for coat color is going to spread through the population then Grizzly bears that have a lighter fur mutation can catch prey more easily and so have more resources to have more offspring. Due to this, the trait starts to spread through the population.

Therefore, the correct option is option C.

To learn more about mutation, here:

https://brainly.com/question/18909373

#SPJ1

If it takes 75.0mL of a 2.50M HCl solution to neutralize 55.0mL of a base unknown concentration, the concentration of a unknown basic solution is 1.83M.

Molarity in chemistry is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.

The molarity of two solutions in a neutralization reaction can be calculated as follows:

CaVa = CbVb

Where;

According to this question, 75.0mL of a 2.50M HCl solution is required to neutralize 55.0mL of a base unknown concentration. The concentration of the solution can be calculated as follows:

2.5/75 = Cb/55

0.0333333333 × 55 = Cb

Cb = 1.83M

Therefore, 1.83M is the molarity of the unknown basic solution.

Learn more about molarity at: https://brainly.com/question/2817451

#SPJ1

Answer: 58.44amu

Explanation:

The Law of the Conservation of mass states that mass isn't created nor destroyed, but simply transformed.

Applying it in a chemistry context means that there will be the same amount of mass of product as you will start out with, as the mass is transformed from the reactants' mass to the products'.

Therefore, it is 58.44amu.

2,2-Dimethylbut-1-yne .The alkyne name is formed using the IUPAC nomenclature system.

First, the length of the longest continuous carbon chain (containing the triple bond) must be identified. In this case, it is a four-carbon chain (but-).

Second, the location of the triple bond must be determined. In this case, it is located on the first carbon atom so the prefix 1- is used.

Third, the substituents must be listed in alphabetical order. In this case, there are two methyl groups (2,2-dimethyl).

The final name is 2,2-Dimethylbut-1-yne.

2,2-Dimethylbut-1-yne .The alkyne name is formed using the IUPAC nomenclature system.

learn more about alkyne here

https://brainly.com/question/23508203

#SPJ4

The statement that best explains what is shown in their data is option D. The beautyberry increases its chances of reproduction because its berries do not all become ripe at the same time.

The data shows that the number of ripe berries and unripe berries varies from month to month, with the most ripe berries in April and the least in December.

This indicates that the beautyberry does not have all of its berries ripen at the same time, which increases the chances of some of them being eaten and spread by animals. This would help increase the chances of the beautyberry reproducing and spreading to new locations.

Therefore, It does not seem from the data provided that it relies on wind to spread its seeds or that it relies on one type of animal to eat the berries, or it uses asexual reproduction to make new plants.

Learn more about beautyberry from

https://brainly.com/question/26027910

#SPJ1

One of the lab groups unintentionally left a beaker with 1.00 M1.00 M of NaOH solution out on the lab table over night. The molarity of the solution is 3.00 M after evaporation.

The total moles of solute contained in a given volume of solution is referred to as a solution's molarity. In this case, "M" stands for molarity, "n" is the number of moles of solute present in the solution, and "V" is the volume of solution present in a container. A unique kind of homogenous mixture made up of two or more components is known as a solution in chemistry. A solute, or substance that is dissolved in a solvent, is one of the components of such a mixture.

Moles = 1.00/1/3 Moles = 3.00 M

Learn more about molarity here

https://brainly.com/question/8732513

#SPJ4

According to stoichiometry and STP conditions ,1785.90 liters of hydrogen is produced.

It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.

In the given reaction as per stoichiometry, 149.84 g of As produces 6 g hydrogen , thus, 39.3 g of As will produce 39.3×6/149.84=1.573 g.

As per STP conditions, V=1.573/2×8.314×273/1=1785.90 liters.

Thus, 1785.90 liters of hydrogen is produced.

Learn more about stoichiometry,here:

https://brainly.com/question/9743981

#SPJ1

To find a proton number, we can use the Periodic Table of the Elements.

The Periodic Table of the Elements is a table that organizes all discovered chemical elements in rows and columns according to the increasing atomic number.

To find the numbers of protons using this periodic table, first, we have to find the element on the periodic table. Using the columns (group) or rows (period) can make the element easier to find on the table.

Second, find the element’s atomic number, which is located above the element symbol, in the upper left-hand corner of the square. This atomic number will tell us how many protons make up a single atom of that element. For example, Boron (B) has an atomic number of 5, consequently it has 5 protons.

Learn more about protons at: https://brainly.com/question/12535409

#SPJ4

The elements belonging to group 1 are more reactive than elements belonging to group 2.

The elements that belongs to s block elements are hydrogen (H), lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr). The nature of alkali metals is soft and shiny in appearance. They have low melting point and are highly reactive in nature and usually tarnish when exposed to air. Sodium (Na) is the most reactive element since it's valence electrons are not tightly held together in the atom. The three elements that are highly reactive are Lithium (Li), Sodium (Na), and potassium (K). The elements toward the bottom left corner of the periodic table are the metals that are the most active in the sense of being the most reactive.

To learn more about alkali metals check the link below:

brainly.com/question/15220625

#SPJ4

Diene is a type of organic compound that contains two double bonds between two carbon atoms.

What are Atoms?

Atoms are the smallest particle of any element that still maintains the properties of that element. Atoms are made up of a nucleus surrounded by one or more electrons. The nucleus is composed of protons and neutrons, and the electrons orbit around the nucleus. Atoms of different elements have different numbers of protons, neutrons, and electrons, which is what gives them their unique properties.

Diene is a conjugated molecule, meaning that its double bonds alternate with single bonds. Diene molecules are used in a variety of chemical reactions, including the formation of polymers and the synthesis of pharmaceuticals.

To know more about atoms,

brainly.com/question/16666188

#SPJ4

Answer:

Explanation:

Mass the fluid, find its volume, and divide mass by volume. To mass the fluid, weigh it in a container, pour it out, weigh the empty container, and subtract the mass of the empty container from the full container. To find the volume of the fluid, you simply measure it very carefully in a graduated cylinder.

The mole fraction of C₂H₆O₂ in 12. 7 molal aqueous solution is 12.7.

In chemistry, a mole fraction is the ratio of the moles of one component in a solution or other mixture to the sum of the moles of all the components.

The ratio of the moles of any component to the sum of the moles of all the other components in the mixture is known as the mole fraction. Each gas's partial pressure in a mixture of gases is calculated by multiplying its mole fraction by its total pressure.

The number of solute molecules divided by the sum of the solute molecules and the solvent molecules is known as the mole fraction. This is equal to how many moles of solute there are in a liter of solvent, expressed in molal. If the molal equivalent C₂H₆O₂ is 12.7 this means, all that is in the solution is solute. Hence the mole fraction of C₂H₆O₂ is 12.7.

To know more about mole fraction visit:

https://brainly.com/question/1542843

#SPJ4

Please put on a lab apron. It helps shield clothing from damage and stains. Examining glass for fractures and chips. This damaged or chipped glassware needs to be properly disposed of.

In order to deal with it safely, we must take the appropriate precautions. Skin burns or other skin injury can be brought on by sodium hydroxide. Additionally, it can injure eyes. Learn as much as you can about the chemicals that will be utilized, including any exposure or leak risks. Find the spill kits and learn how to use them. Verify labels and throw away any chemicals that aren't 100 percent pure. For ease of access, alphabetize the lab chemicals. Security is the practice of keeping unwelcome dangers and hazards out of the lab environment.

To learn more about sodium hydroxide click here https://brainly.com/question/29327783

#SPJ4

Answer:

CO₂H

Explanation:

The empirical formula gives the smallest whole number ratio of atoms of each element in a compound.

The ratio of hydrogen, carbon and oxygen in H₂C₂O₄ is:

H : C : O

2 : 2 : 4

They have a common factor of 2, so we can divide the atoms of each element by 2:

H : C : O

1 : 1 : 2

This gives us HCO₂ or CO₂H

No, one molecule does not make up a mole. In chemistry, the terms "mole" and "molecule" are used interchangeably.

The word "mole" is used to describe a quantity that cannot be expressed in terms of grams or milligrams. A mole thus counts the quantity of atoms, ions, or molecules.

A molecule is a type of chemical that develops when multiple atoms are combined by chemical bonding. Electrical charge does not exist in molecules. A molecule's constituent atoms may come from the same element or from separate elements. Varying molecules have different ratios between these atoms. Molecules are a unit of measurement for the quantity of molecules in a system.

The primary distinction between a mole and a molecule is that a mole is a unit of measurement for amount whereas a molecule is an atomized chemical species.

To learn more about mole click here

https://brainly.com/question/26416088

#SPJ4

Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, 0.630 is the gram molecular mass of this gas.

Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.

Mathematically,

Density = Mass of the gas ÷volume marked on the graduated cylinder

density= 0.630 grams per liter

means 0.630 grams of an unknown gas is present in 1 liter of solution

Therefore, 0.630 is the gram molecular mass of this gas.

To know more about density, here:

https://brainly.com/question/16894337

#SPJ1

Solids known as molecular solids are made up of molecules. Intermolecular forces such as hydrogen bonds, dipole-dipole forces, and dispersion forces hold together molecular solids. Solids with ions as their constituent parts are known as ionic solids. Ion-dipole forces keep ionic solids together.

Atomic solids are those whose constituent atoms make up their entire structure. Atomic solids can be broken down into the three categories below, each of which is held together by a distinct set of forces. Dispersion forces atomic solids is the first category, which only consists of noble gases in their solid states and is held together by coulombic forces that are comparatively weak. Metallic atomic solids fall under the second category, which is held together by nonbonding bonds and contains substances like copper and silver as examples. Network covalent atomic solids are the final group of materials that are held together by covalent bonds and include materials like silicon dioxide, graphite, and diamond.

Intermolecular forces can be divided into three categories: hydrogen bonds, dipole-dipole interactions, and London dispersion forces (LDF). Despite the fact that molecules can have any combination of these three types of intermolecular forces, all substances at least have LDF.

To know more about solids visit:

https://brainly.com/question/17061172

#SPJ4

The correct answer is : Nitrogen's molecule bends into a trigonal pyramidal shape due to the presence of one lone pair of electrons

O eg=tetrahedral, mg=trigonal pyramidal

The electron geometry (eg) of NCl3 is determined by the positions of the electrons around the central atom, nitrogen (N). NCl3 has one lone pair of electrons on nitrogen and three bonding pairs of electrons with chlorine atoms, so the electron geometry is tetrahedral. NCl3's molecular geometry (mg) is determined by the atom positions in the molecule. In a trigonal pyramidal shape, NCl3 has one nitrogen atom in the centre and three chlorine atoms surrounding it. Nitrogen's molecule bends into a trigonal pyramidal shape due to the presence of one lone pair of electrons. Electron geometry, also known as electron pair geometry, is the arrangement of electron pairs in a molecule or ion around a central atom. It is determined by the number of electron pairs surrounding the central atom, which includes both bonding pairs and lone electron pairs. The electron geometry can be used to predict the overall shape of a molecule or ion and also helps to understand the polarity of the molecule.

To learn more about electron geometry  here:

https://brainly.com/question/7558603

#SPJ4

The gravitational force of attraction between the two objects would be 1.1858 x [tex]10^{-6[/tex] Newton.

The gravitational force of attraction between two objects of mass m1 and m2 is proportional to the product of the masses of the two objects and inversely proportional to the square of the distance between the two objects.

This is mathematically expressed as follows:

Gravitational force (F) = [tex]Gm_1m_2/d^2[/tex]

Where G is the universal gravitational constant and d is the distance separating the two masses.

In this case:

m1 = 8,000 kg

m2 = 5.0 kg

G = 6.67 x [tex]10^{-11[/tex] N m2 / kg2

d = 1.5 m

F = 6.67 x  [tex]10^{-11[/tex] x 8,000 x 0.5/1.5 x 1.5

  = 26680 x  [tex]10^{-11[/tex]/2.25

  = 11857.77 x  [tex]10^{-11[/tex]

   = 1.1858 x [tex]10^{-6[/tex] Newton

In other words, two spherical objects of masses 8,000 kg and 5.0 kg separated by a distance of 1.5 would have a gravitational force of attraction of 1.1858 x [tex]10^{-6[/tex] Newton between them.

More on the gravitational force of attraction can be found here: https://brainly.com/question/10405569

#SPJ1

There would be 4 valence electrons  in an atom with 14 protons

An element is any substance made entirely of one type of atom. For instance, all of the atoms that make up the element carbon are carbon atoms. The atomic number of an element describes how many protons are present in that element's atoms. Inside a neutral atom, the number of protons and electrons must be equal.

The atomic number of an element also serves as a guide to its location on the periodic table.

According to the question, an element has 14 electrons. This implies that it must have 14 protons, indicating that its atomic number is 14.

We must first list any possible electrical configurations for the element before we may locate it:

1s²2s²2p⁶3s²3p²

In the outermost shell, there are four electrons. The element therefore has 4 electrons in its valence shell is 4

Learn more about atomic number at https://brainly.com/question/8834373

#SPJ4

Prevent the spread of dusts and vapors.Neutralize acids and bases, if feasible. Manage the spread of the liquid.absorb the liquid.Gather and incorporate the cleanup residues. Get rid of the wastes. Decontaminate the area and affected system.

Chemical spills are the uncontrolled launch of a dangerous chemical, both as a strong, liquid or a gas. these spills need to be minimized as tons as possible.

Chemical spills usually result from the dangerous handling of chemical compounds, incorrect chemical storage, chemical garage tank ruptures, incorrect containers for chemical disposal, and failure to eliminate chemical substances in a well timed way.

There are sorts of spills that you can run into: simple Chemical Spills and complex Chemical Spills. easy Chemical Spills are small, confined, and present minimal dangers.

To know more about chemical click here

https://brainly.com/question/26487468

#SPJ4

Only the molecules of NO, SO2 are polar. These chemicals are referred to as polar solvents since they have both positive as well as ends.

a structure where the density of electrons is unevenly distributed. Nonpolar refers to a structure where the density of electrons is more or more uniformly distributed. Numerous physical, molecular, and ecological properties of molecules are influenced by polarity, which can take many different forms.

A polar molecule bond is one in which there is an electrostatic potential difference in between atoms of between 0.5 and 2.0. A polar covalent link is a type of covalent bond with which the atoms are attracted to electrons in uneven amounts, resulting in looked.

To know more about polar visit:

https://brainly.com/question/11405437

#SPJ1

The Correct answer is 50 Meters,Displacement is defined to be the change in position of an object.

Displacement is the term used to describe the shift in an object's location or the shortest path/length between two places. With such a magnitude and orientation, it is a vector quantity.

Displacement=Δx=x f −x 0

The student's path fortunately consisted of straight lines and right angles. Therefore we can use the pythagorean theorem to find the distance between where the student's path started and stopped.

A2+B2= C2.

We Give

meters east in for A, 40.

meters north for B  60 .

Distance =40+60+20=110m

Displacement OC= Root of (40 ²+30 ²)

                            = 50 m

That's the length of the distance between where the student started and where the student ended up.

A2 plus B2 equals C2. We plug 30. meters east in for A, and 40. meters north for B. 30. meters squared plus 40. meters squared equals 2500 meters2. Then we take the square root of that number and get 50. meters.

To know more about Displacement refer to :

https://brainly.com/question/321442

#SPJ1