The speed at which the arrow would be launched is 133.42 m/s
The work-energy theorem asserts that the net work done applied by the forces on a particular object is equivalent to the change in its kinetic energy.
The equation for the work-energy theorem can be computed as:
[tex]\mathbf{W =\Delta K.E}[/tex]
[tex]\mathbf{F\Delta x =\dfrac{1}{2} mv^2}[/tex]
where;
Force (F) = 267 Ndistance Δx = 0.60 mmass (m) = 18 gspeed (v) = ???From the above equation, let make speed(v) the subject of the formula:
∴
[tex]\mathbf{v = \sqrt{\dfrac{2(F \Delta x)}{m}} }[/tex]
[tex]\mathbf{v = \sqrt{\dfrac{2(267 \times 0.60)}{0.018}} }[/tex]
v = 133.42 m/s
Learn more about the work-energy theorem here:
https://brainly.com/question/17081653
the gravitational force acts on all objects in proportion to their mass. neglecting air resistance, why don’t heavy objects fall faster than light ones?
Answer:
Because in correspondence to the same distance from a mass, the gravitational acceleration is the same for all the bodies. It doesn't depend on the mass of the objects.
the smallest division value of electronic balance
Answer:
0.1g to 0.0000001g hope it helps uu
How does the force of gravity affect the rate of acceleration?
What type of bond is found in pure gold?
A) Metallic
B) Ionic
C)Covalent
D)Diatomic
The type of bond found in pure gold is metallic bonding, indicated by metallic bonds. Therefore option A is correct.
Metallic bonding occurs between metal atoms, such as gold, and is characterized by the sharing of electrons among a sea of delocalized electrons.
In metallic bonds, the valence electrons of metal atoms are not strongly bound to any particular atom but are free to move throughout the metal lattice.
This sharing of electrons gives rise to properties such as high electrical and thermal conductivity, malleability, and ductility, which are characteristic of metals like gold.
Unlike ionic or covalent bonds, metallic bonds do not involve the transfer or sharing of electrons between different elements.
Know more about metallic bonding:
https://brainly.com/question/29762857
#SPJ6
Can someone help with 25 to 28 it’s multiple-choice!
Answer:
25:speed
26:acceleration
27:scalar
28:kinetic
A cannonball explodes in mid-air, fragmenting into several pieces. How does the total
momentum of the pieces after the explosion compare to the total momentum of the
cannonball just before the explosion?
I. They are the same
II. The momentum of the fragments is less than the momentum of the cannonball
III. The momentum of the fragments is more than the momentum of the cannonball
Hi there!
I. They are the same.
Due to the Conservation of Momentum, an explosion as such means that the TOTAL momentum of the system (all of the pieces) is conserved.
When Magnesium and Fluorine react what type of bond is formed
A) Metallic
B) Ionic
C) Covalent
D) Diatomic
Answer:
hi your answer should be B
Explanation:
Hope this helps!
Answer:
ionic
Explanation:
two metals that bond are considered ionic bonds
when do magnets have the most potential energy
Answer:
Explanation:
Permanent magnets do have potential energy, stored in their magnetic field. That energy can be compared to the potential energy of some compressed spring. See the picture below, representing the magnetic field lines of a magnetized sphere : These lines are compressed inside the magnet.
How much work is done when mass of 3kg(weighing 30N)is lifted vertically through 6m?
Answer:
180 [J].
Explanation:
1) the required work [W] can be calculated as difference of the energy: W=E₂-E₁, where E₁=mgh₁ - the energy before lifting, E₂=mgh₂ - the energy after lifting;
2) W=mgh₂-mgh₁, where m - mass; g=10 [N/kg], h - height;
3) then the required work [W]:
W=mg*(h₂-h₁)=30*6=180 [J].
why does rhododendron not grow well in the terai region of nepal give reason
Answer:
Tge Rhododendrob is the national flower of Nepal. The hills and mountain sides ranges of Nepal are decorated with diff colours and shapes
How much energy has 4x 1010 m³ of water collected in a reservoir at a 2. 3. height of 100 m from the power house? What kind of energy is that? (Given, mass of 1 m³ of water = 1000 kg)
Explanation:
[tex] \rule{999pt}{66646pt}[/tex]
what are the three elements that can be used to make a magnet?
Answer:
Iron, cobalt, and nickel are the only three naturally occurring elements that are magnetic.
Explanation:
hope it helps
correct me if I'm wrong thank you
brainliest please
Answer:
The three elements that can be used to make a magnet are :
Aluminum, nickel and cobalt
Assume ideal behavior. How many moles of are needed to fill a 2000L weather balloon at 210K and 1atm pressure? Round your answer to the nearest mole (use R = 0.082057 L atm mol-1K-1)
Considering the ideal gas law, 116.06 moles of are needed to fill a 2000 L weather balloon at 210 K and 1 atm pressure.
An ideal gas is a theoretical gas that is considered to be composed of randomly moving point particles that do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.
The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:
P×V = n×R×T
where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. The universal constant of ideal gases R has the same value for all gaseous substances.
In this case, you know:
P= 1 atmV=2000 Ln= ?R= 0.082057 [tex]\frac{atmL}{molK}[/tex]T= 210 KReplacing in the ideal gas law:
1 atm× 2000 L = n× 0.082057 [tex]\frac{atmL}{molK}[/tex]× 210 K
Solving:
[tex]n=\frac{1 atmx 2000 L}{0.082057 \frac{atmL}{molK}x 210 K}[/tex]
n=116.06 moles
Finally, 116.06 moles of are needed to fill a 2000 L weather balloon at 210 K and 1 atm pressure.
Learn more about the ideal gas law:
https://brainly.com/question/4147359?referrer=searchResultsA 78 N block is supported by a spring whose constant is 12 N/m. Calculate the elongation of the spring under this load.
a. 6.5 m
b. 1.5 m
c. 8.2 m
d. 7.2 m
Answer:
a 6.5 m
Explanation:
[tex]f = kx = > x = \frac{f}{k} = \frac{78}{12} = 6.5 m[/tex]
why does polishing the surface of a metal extend fatigue life
Answer:
they are machined with shape characteristics which maximize the fatigue life of a metal.
Explanation:
they are highly polished to provide the surface characteristics which enable the best fatigue life.
Which design of the walls would be most desirable help avoid echoes?
A
They should use bumpy walls for all four sides.
B
They should use bumpy walls for only one side.
С
They should use smooth walls for all four sides.
D
They should use smooth walls for only one side.
Answer:
a
Explanation:
because the sound wont bounce off
What does the risk of biological harm from radiation depend on?
Answer:
The effects of radiation depend on the type, energy, and location of the radiation source, and the length of exposure.
Anyone please help thank you
Answer:
A) earth
B) live
C) live
D) earth
Explanation:
hope i help
what are the electrical signals generated by neurons called?
Answer:
electrons
Explanation:
because it electrons
Please HELP
6. A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed
of 10.0-m/s.
a.
If the rope can only tolerate 400-N of force, what is the maximum speed the bucket can
experience before the rope snaps? {Hint: Let the centripetal force be 400-N and solve for the speed)
Answer:
Explanation:
hope this helps
The maximum speed of the bucket can experience before the rope snaps if A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed of 10.0-m/s is 10.85 m / s.
What is force?Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces. For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.
Newton is a unit of force used by physicists that is part of the International System (SI). The force required to move a body weighing one kilogram one meter per second is known as a newton.
Given:
The mass of the bucket, m = 3.4 kg,
The length of the rope, r = 1 m,
The speed of the bucket, v = 10 m / s,
The force of the rope, F = 400 N,
Calculate the maximum speed by the formula given below,
[tex]F_c = mv^2 / r[/tex]
400 = 3.4 v² / 1
v² = 400 / 3.4
v² = 117.6
v = 10.85 m / s
Therefore, the maximum speed of the bucket can experience before the rope snaps if A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed of 10.0-m/s is 10.85 m / s.
To know more about Force:
https://brainly.com/question/13191643
#SPJ2
A concrete block (B-36 x10 °C-') of volume 100 mat 40°C is cooled to
-10°C. What is the change in volume? *
A. It will increase by 0.18 m
B. It will decrease by 0.18 m'
C.It will increase by 0.05 m
D. It will decrease by 0.05 mº
Applying Charles law
[tex]\\ \sf\Rrightarrow \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
[tex]\\ \sf\Rrightarrow \dfrac{100}{313}=\dfrac{V_2}{263}[/tex]
[tex]\\ \sf\Rrightarrow V_2=\dfrac{26300}{313}[/tex]
[tex]\\ \sf\Rrightarrow V_2=84.02ml[/tex]
An object is projected into the air with a vertical velocity of 20 feet per second. At what times will the object be on the ground
Answer:
20 ft/sec / 32 ft/sec^2 = .625 to reach top
2 * .625 = 1.25
It will be on the ground at t = 0 and t = 1.25
You can also solve the equation:
H = 0 = V0 t - 1/2 g t^2
Obviously, at t=0 h = 0
V0 = 1/2 g t is a solution
t = 20 * 2 / 32 = 1.25 sec
which is the correct relationship among pressure, flow, and resistance?
Answer:
Flow is proportional to change in pressure and inversely proportional to resistance.
Please help is any one know Its correct answer
Answer:
a=Head
b=Tip
c=South pole of the magnet
d=North pole of the magnet
what is the prmary source of energy inside of the earth
Which model below shows the positions of the Sun, Moon, and Earth that have the greatest effect on ocean tides?
Answer:
Below!
Explanation:
Referring to the picture, we can conclude that the picture J will have the most effect on ocean tides.
Whichever model is similar to model J in the picture will be your answer.
Hoped this helped.
Resolve the weight of the box to find the component of the weight acting parallel to the slope.
W = 50N
30
Answer:
here's your answer below
Explanation:
sorry something went wrong
.
calculate the resultant force acting on the object and state its direction
[tex]\\ \sf\Rrightarrow F_{net}=F_1+F_2+F_3+F_4[/tex]
[tex]\\ \sf\Rrightarrow F_{net}=20N+20N+10N-10N[/tex]
[tex]\\ \sf\Rrightarrow F_{net}=40N[/tex]
Direction is east.1. An 80 kg skydiver uses a parachute to produce an applied force of 700 N while falling with an initial
velocity of 40 m/s
Time taken by the skydiver to land on the ground is 4.57 seconds
The applied force, F = 700 N
The mass of the skydiver, m = 80 kg
The velocity, v = 40 m/s
To calculate the time taken by the skydiver to fall to the ground will be calculated using the formula
[tex]F=\frac{mv}{t}[/tex]
Substitute F = 700, m = 80, and v = 40 to solve for t
[tex]700=\frac{80(40)}{t}\\\\700t=3200\\\\t=\frac{3200}{700}\\\\t=4.57 s[/tex]
Time taken by the skydiver to land on the ground is 4.57 seconds
Learn more here: https://brainly.com/question/25898421
The weak nuclear force causes:
(A). Lightning
(B). Combustion
(C). Radiation
D). Protons and neutrons to form the nuclear of atoms
Answer:
(C) Radiation
Explanation:
The weak nuclear forces causes radiation to form.