Answer:
When the circuit is connected properly, the current starts flowing from one end of the battery to the other end.
Explanation:
hope this helps!
Answer:
When the circuit is connected properly, the current starts flowing from one end of the battery to the other end.
Explanation:
Edmentum answer.
Un autobús en una autopista lleva una magnitud de la velocidad de 95 km/h, el conductor observa que debido a un derrumbe la carretera está cerrada, en ese instante acciona los frenos, deteniendo el autobús después de recorrer 60 m. a) ¿Cuál es el valor de la aceleración en el autobús?
Answer:
La aceleración del autobús es -5.80 m/s².
Explanation:
Podemos encontrar la aceleración del autobús usando la siguiente ecuación:
[tex] v_{f}^{2} = v_{0}^{2} + 2ad [/tex]
Where:
[tex]v_{f}[/tex]: es la velocidad final = 0 (se detiene al final)
[tex]v_{0}[/tex]: es la velocidad inicial = 95 km/h
d: es la distancia recorrida = 60 m
Por lo tanto, la aceleración es:
[tex] a = \frac{v_{f}^{2} - v_{0}^{2}}{2d} = \frac{0 - (95 \frac{km}{h}*\frac{1000 m}{1 km}*\frac{1 h}{3600 s})^{2}}{2*60 m} = -5.80 m/s^{2} [/tex]
El signo negativo se debe a que el autobús está desacelerando (hasta que se detiene).
Entonces, la aceleración del autobús es -5.80 m/s².
Espero que te sea de utilidad!
How is energy transferred when
hitting a nail?
Answer:
kinetic energy
kinetic energy
A police car is traveling north on a straight road at a constant 20.0 m/sm/s. An SUV traveling north at 30.0 m/sm/s passes the police car. The driver of the SUV suspects he may be exceeding the speed limit, so just as he passes the police car he lets the SUV slow down at a constant 1.90 m/s2m/s2. How much time elapses from when the SUV passes the police car to when the police car passes the SUV
Answer:
elapsed time is 10.53 sec
Explanation:
Given that;
velocity of the car [tex]V_{P}[/tex] = 20.0m/s
Initial velocity of the SUV [tex]U_{suv}[/tex] = 30.0 m/s
SUV slow down at a constant a = 1.90 m/s²
Now, Let Vs represent the final velocity of the SUV and after time t when the police can cross it and d represent the distance both of the cars covers between the two crossing
so;
d = [tex]V_{P}[/tex] × t
also d = [tex]U_{suv}[/tex] t - 1/2 at²
so
[tex]V_{P}[/tex] × t = [tex]U_{suv}[/tex] t - 1/2 at²
we substitute
20 × t = 30 × t - 1/2 × 1.9 × t²
20t = 30t - 1/2 × 1.9 × t²
1/2 × 1.9 × t² = 30t - 20t
1/2 × 1/9 × t² = 10t
t = 2 × 10 / 1.9 ( as t ≠ 0 )
t = 20 / 1.9
t = 10.53 sec
Therefore, elapsed time is 10.53 sec
what would happen to the surface temperature on Earth if large amounts of carbon dioxide were removed from the atmosphere?
Answer:
If carbon emissions stopped, the oceans catch up with the atmosphere, the Earth's temperature would rise about another 1.1F (0.6C).
Explanation:
If a cyclist travels 30 km in 2 h, What is her average speed?
Answer:
15km/h
Explanation:
→ Speed = Distance ÷ Time
30 ÷ 2 = 15km/h
Match the choices to the appropriate blank . Use each choice only once.
1. about 100,000 light-years
2. about 5 AU
3. about 8 light-years
4. about 1.5 AU
5. less than 0.01 AU
a. Mars is_____from the Sun.
b. Jupiter is_____from the Sun.
c. The star Sirius is_____from the Sun.
d. The diameter of the Milky Way Galaxy is_____.
e. The distance from Earth to the Moon is_____.
Answer:
1. about 1.5 AU
2. about 5 AU
3. about 8 light-years
4. about 100,000 light-years
5. less than 0.01 AU
Explanation:
a. Mars is about 1.5 AU from the Sun.
b. Jupiter is about 5 AU from the Sun.
c. The star Sirius is about 8 light-years from the Sun.
d. The diameter of the Milky Way Galaxy is about 100,000 light-years.
e. The distance from Earth to the Moon is less than 0.01 AU.
Note: AU is an acronym for Astronomical Unit and it is a standard unit by astronomers to illustrate the distance between the planetary bodies found in the solar system.
You are playing with a yoyo . If Potential energy of the yoyo is 18 J , and the total mechanical energy is 20 J , how much kinetic energy does the yoyo have ?
Answer:
the kinetic energy of the yoyo is 2 J.
Explanation:
Given;
potential energy of yoyo, P.E = 18 J
total mechanical energy, M.E = 20 J
The kinetic energy of yoyo is calculated as;
M.E = K.E + P.E
where;
K.E is the kinetic energy
K.E = M.E - P.E
K.E = 20 J - 18 J
K.E = 2 J
Therefore, the kinetic energy of the yoyo is 2 J.
Sam heaves a 16lb shot straight upward, giving it a constant upward acceleration from rest of 35 m/s^2 for 64.0 cm. He releases it 2.20m above the ground. You may ignore air resistance.
(a) What is the speed of the shot when Sam releases it?
(b) How high above the ground does it go?
(c ) How much time does he have to get out of its way before it returns to the height of the top of his head, 1.83 m above the ground?
Answer:
6.69 m/s
4.483 m
1.42s
Explanation:
Given that:
Initial Velocity, u = 0
Final velocity, v =?
Acceleration, a = 35m/s²
1.) using the relation :
v² = u² + 2as
v² = 0 + 2(35) * 64*10^-2m
v² = 70 * 0.64
v = sqrt(44.8)
v = 6.693
v = 6.69 m/s
B.) height from the ground, h0 = 2.2
How high ball went , h:
Using :
v² = u² + 2as
Upward motion, g = - ve
0 = 6.69² + 2(-9.8)*(h - 2.2)
0= 6.69² - 19.6(h - 2.2)
44.7561 + 43.12 - 19.6h = 0
19.6h = 44.7561 - 43.12
h = 87.8761 / 19.6
h = 4.483 m
C.)
vt - 0.5gt² = h - h0
6.69t - 0.5(9.8)t²
6.69t - 4.9t² = 1.83 - 2.2
-4.9t² + 6.69t + 0.37 = 0
Using the quadratic equation solver :
Taking the positive root:
1.4185 = 1.42s
An empty parallel plate capacitor is connected between the terminals of a 5.12-V battery and charges up. The capacitor is then disconnected from the battery, and the spacing between the capacitor plates is doubled. As a result of this change, what is the new voltage between the plates of the capacitor
Answer:
V₂ = 2* V₁ = 10.24 V
Explanation:
By definition, the capacitance is given by the following relationship between the charge on one of the plates (for a parallel plate capacitor) and the voltage between them:[tex]C = \frac{Q}{V} (1)[/tex]
Applying (1) to the capacitor, once fully charged and disconnected from the battery, V = V₁ = 5.12 V.Now, we know that for a parallel plate capacitor, the capacitance is independent from the voltage applied, as follows:[tex]C = \frac{\epsilon_{0} * A}{d} (2)[/tex]
where ε₀ = 8.85*10⁻¹² F/m, A is the area of one of the plates, and d is the spacing between plates.If we double the spacing between the plates d, the capacitance will be reduced to half, due to d₂ = 2* d₁Once disconnected from the battery, due to the principle of conservation of the charge, the charge Q must remain constant, i.e.,Q₁ = Q₂ = Q
Since the only variable that can be modified is the voltage V, if the capacitance reduces to the half of the original value, the voltage must be doubled in order to keep C₂ = C₁/2, true.⇒ Q/V₂ = Q/V₁ * 1/2 ⇒ V₂ = 2* V₁ = 2* 5.12 V = 10.24 V
What is displacement?
a. The distance an object travels.
b. The distance between the starting point and the ending point of an object's
journey.
C. The amount of time it takes an object to travel to a destination.
d. The path in which an object travels.
Answer:
displacement is the distance between the starting point and the ending point of an object's journey
The law of ____ states that energy in a system can change forms but can never be created or destroyed.
Answer:
The Law of Conversation
Two boxes on opposite ends of a massless board that is 3.0 m long. The board is supported in the middle by a fulcrum. The box on the left has a mass (m1) of 25 kg, and the box on the right has a mass (m2) of 15kg. How far should the fulcrum be positioned from the left side of the board in order to balance the masses horizontally?
a. 0.38 m
b. 1.1 m
c. 0.60 m
d. 1.9 m
Answer:
b. 1.1 m
Explanation:
It is given that the total distance between the masses is equal to the length of the board, which is 3 m. Therefore,
[tex]s_{1} + s_{2} = 3\ m\\\\s_{2} = 3\ m - s_{1}\ --------- eqn(1)[/tex]
where,
s₁ = distance of fulcrum from left mass
s₂ = distance of fulcrum from right mass
In order to achieve balance, the torque due to both masses must be equal:
[tex]T_{1} = T_{2}\\m_{1}s_{1} = m_{2}s_{2}\\(25\ kg)(s_{1}) = (15\ kg)(s_{2})\\\\\frac{15\ kg}{25\ kg}(s_{2}) = s_{1}\\\\using\ eqn(1):\\(0.6)(3\ m - s_{1}) = s_{1}\\1.8\ m = 1.6\ s_{1}\\s_{1} = \frac{1.8\ m}{1.6}[/tex]
s₁ = 1.1 m
Hence, the correct option is:
b. 1.1 m
What is average acceleration due to gravity on Earth for a 2000 kg boulder, in proper SI units?
Answer:
9.8m/s²
Explanation:
The average acceleration due to gravity on Earth for a 2000kg boulder is 9.8m/s².
Every object on earth is accelerated towards the center by a rate of change of velocity with time value of 9.8m/s².
The acceleration due to gravity on earth is a constant value from places to places.
For other planetary bodies, the value varies and it differs.
But on earth every object is accelerated at 9.8m/s².
A particle with charge Q and mass M has instantaneous speed uy when it is at a position where the electric potential is V. At a later time, the particle has moved a distance R away to a position where the electric potential is V2 ) Which of the following equations can be used to find the speed uz of the particle at the new position?
a. 1/2M(μ2^2-μ1^2)=Q (v1-v2)
b. 1/2M(μ2^2-μ1^2)^2=Q(v1-v2)
c. 1/2Mμ2^2=Qv1
d. 1/2Mμ2^2=1/4πx0 (Q^2/R)
Answer:
A
Explanation:
Ke = 1/2 MV^2
A 30 kg male emperor penguin under a clear sky in the Antarctic winter loses very little heat to the environment by convection; its feathers provide very good insulation. It does lose some heat through its feet to the ice, and some heat due to evaporation as it breathes; the combined power is about 12 W. The outside of the penguin's body is a chilly −22∘C, but its surroundings are an even chillier −38∘C. The penguin's surface area is 0.56 m2, and its emissivity is 0.97. What is the rate of energy loss by radiation
Answer:
Rate of energy loss by radiation is 28.31 Watt
Explanation:
Given that;
m = 30 kg
power p = 12 W
emissivity e = 0.97
Surface Area A = 0.56 m²
outside of the penguin's body T = −22°C
surroundings Temperature Ts = -38°C
the rate of energy loss by radiation = ?
Now, using Stefan-Boltzmann law;
P = σeA [ T⁴ - Ts⁴ ]
Stefan's constant σ = 5.67 × 10⁻⁸
so we substitute
P = 5.67 × 10⁻⁸ × 0.97 × 0.56 [ (-22 + 273 k)⁴ - (-38 + 273 k )⁴]
= 3.079944 × 10⁻⁸ [ 919325376]
= 28.31 Watt
the rate of energy loss by radiation is 28.31 Watt
a plane passes over Point A with a velocity of 8,000 m/s north. Forty seconds later it passes over Point B with a velocity of 10,000 m/s north. Which is the plane's acceleration from A to B ?
Acceleration = (change in velocity) / (time for the change)
Change in velocity = (ending velocity) - (starting velocity)
Change in the plane's velocity = (10,000 m/s north) - (8,000 m/s north)
Change in the plane's velocity = 2,000 m/s north
Time for the change = 40 seconds
Acceleration = (2,000 m/s north) / (40 seconds)
Acceleration = 50 m/s² north
Your friend, a world-class long jumper, is trapped on the roof of a burning building. His only escape route is to jump to the roof of the next building. Fortunately for him, he is in telephone contact with you, a Physics 131 student, for advice on how to proceed. He has two options. He can jump to the next building by using the long-jump technique where he jumps at 45o to the horizontal. Or, he can take his chances by staying where he is in the hopes that the fire department will rescue him. You learn from the building engineers that the next building is 10 m away horizontally and the roof is 3 m below the roof of the burning building. You also know that his best long-jump distance is 7.9 m . What do you advise him to do
Answer:
y = 7.33 m, x= 3 m, t = 1.608 s
it is still higher than the second building, which indicates that if it jumps it will be saved
Explanation:
Let's use the projectile launch ratios, let's start with the range ratio
R = v₀² sin² 2θ / g
in this case the range is R = 7.9m and the angle is 45º, let's find the initial velocity
v₀² = R g / sin² 2θ
let's calculate
v₀ = [tex]\sqrt{ \frac{ 7.9 \ 9.8}{ 1} }[/tex]
v₀ = 8.80 m / s
Let's find the components of the initial velocity
v₀ₓ = v₀ cos 45 = 8.80 cos 45
[tex]v_{oy}[/tex] = v₀ sin 45 = 8.80 sin 45
v₀ₓ = 6.22 m / s
v_{oy} = 6.22 m / s
To save yourself, you have to be at the same time as the other building or higher.
x = v₀ₓ t
t = x / v₀ₓ
t = 10 / 6.22
t = 1.608 s
let's see how much it has descended in this time
y =y₀ + v_{oy} t - ½ g t²
y = 10+ 6.22 1.608 - ½ 9.8 1.608²
y = 7.33 m
therefore it is still higher than the second building, which indicates that if it jumps it will be saved
which phenomenon supports the particular model of light?
Answer:
photoelectric effect
Explanation:
The photoelectric effect supports a particle theory of light in that it behaves like an elastic collision (one that conserves mechanical energy) between two particles, the photon of light and the electron of the metal.
7 x 7 x 7 x.........x 7 = n (30 times)
7 is multiplied 30 times to get a number n. Which of the following will be a factor of n?
3. A 70 kg person climbs a 6 m ladder. How much work is required by the person?
Answer:
4116J
Explanation:
Given parameters:
Mass of the person = 70kg
Height of the ladder = 6m
Unknown:
Work done = ?
Solution:
The work done by the person climbing is the same as the potential energy.
Work done is the force applied to move a body through a distance;
So;
Potential energy = mass x acceleration due to gravity x height
Therefore;
Potential energy = 70 x 9.8 x 6 = 4116J
An 8.0-kg object moving with an initial velocity of 8.0 m/s on a surface comes to rest due to friction after it travels a horizontal distance of 11 m. What is the coefficient of kinetic friction between the object and the surface
Answer:
μk = 0.3
Explanation:
According the work-energy theorem, the net work done on an object, is equal to the change in the kinetic energy of the object.In this case, assuming that the object was not accelerating when moving at 8.0 m/s, the only force doing work on it, is the kinetic friction force, acting through the 11 m distance before causing the object to come to rest.The kinetic friction force, is given by the following expression:[tex]f_{frk} = \mu_{k} * F_{n} (1)[/tex]
where μk = coefficient of kinetic friction, Fn = normal force.Assuming that the surface is horizontal, since the normal force is always perpendicular to the surface, and the object is not accelerating in the vertical direction, this means that the normal force must be equal and opposite to the force that gravity exerts on the object, as follows:[tex]F_{n} = m*g (2)[/tex]
The friction force and the horizontal displacement produced by it have opposite directions, so the angle between the force and the displacement is 180º.So, we can express the work done by the kinetic friction force, as follows:[tex]W_{ffr} = -F_{fr} * d = - \mu_{k}* m*g*d (3)[/tex]
We have already said that (3) must be equal to the change in the kinetic energy, ΔK, as follows:[tex]\Delta K = K_{f} - K_{o} (4)[/tex]
Since the object comes to rest, Kf = 0.Replacing K₀ = 1/2*m*v₀² in (4), we have:[tex]\Delta K = 0 - \frac{1}{2} *m * v_{o} ^{2} = - \frac{1}{2} *m * v_{o} ^{2} (5)[/tex]
From (3) and (5), since they are equal each other, we get:[tex]W_{ffr} = \mu_{k}* g*d = \frac{1}{2} * v_{o} ^{2} (6)[/tex]
Replacing by the givens, and solving for μk, we get:[tex]\mu_{k} = \frac{1}{2} * v_{o} ^{2} *\frac{1}{g*d} =\frac{(8.0m/s)^{2}}{2*9.8m/s2*11m} = 0.3 (7)[/tex]
A researcher who does not want to manipulate or interfere with the behavior of research subjects would conduct a __________ study.
A.
cross-sectional
B.
naturalistic observation
C.
case
D.
longitudinal
Please select the best answer from the choices provided
A
B
C
D
Answer:
b
Explanation:
A researcher who does not want to manipulate or interfere with the behavior of research subjects would conduct a Naturalistic observation study.
What is observational research?Observational technique in the research field is usually, " watching something attentively in a scientific manner". If we are observing research technique and its phenomena naturally it's our interest to see in our own subjects. The subject will be known only when we observe the things. It's all about understanding, analyzing, predicting and manufacturing in a unique manner.
The types of observation techniques are:
Naturalistic observation.Participant observation.Structured observation.Naturalistic observation:
This is the observation which can be observed naturally and the phenomenon will be interacted only with the researchers not with the participants.
Some of the observational research methods are:
Thematic analysisGrounded theoryHence, Option B is the correct answer.
Learn more about the Naturalistic observation,
https://brainly.com/question/28041973
#SPJ6
Earth has a mass of 5.98 1024 kg and a radius of 6.38 106 m. Assume it is a uniform solid sphere. The distance of Earth from the Sun is 1.50 1011 m. (Assume Earth completes a single rotation in 24.0 hours and orbits the Sun once every 365 Earth days.) (a) What is the rotational kinetic energy of Earth on its axis
Answer:
Explanation
Rotational kinetic energy of the earth = 1/2 Iω²
where I is moment of inertia of the earth and ω is angular velocity .
I = 2/5 m R² , m is mass and R is radius of the earth .
I = 2/5 x 5.98 x 10²⁴ x ( 6.38 x 10⁶ )²
=97.36 x 10³⁶
ω = 1 / T
T = 24 x 60 x 60 = 86400 s
ω = 1 / 86400
= 11.57 x 10⁻⁶ rad / s
Rotational Kinetic energy = 1/2 Iω²
= .5 x 97.36 x 10³⁶ x (11.57 x 10⁻⁶ )²
= 6516.54 x 10²⁴ J
A power source is going to shake a string and create waves 5.0 cm in amplitude. The string has a linear mass density of 4.0x10-2 kg/m and is pulled under a tension of 100 N. The source can deliver a maximum power of 300 W. What is the highest frequency f at which the source can shake without exceeding the maximum power?
Answer:
55.13 Hz
Explanation:
Given that :
Amplitude, A =. 5cm = 0.05m
Density, d = 4 * 10^-2
Tension, T = 100N
Power = 300 W
Recall:
Power = 0.5dA²w²v
v = velocity = √T/d ; w = Angular velocity = 2πf
Rewriting our equation :
P = 0.5 * d * A² * (2πf)² * √T/d
300 = 0.5 *(4*10^-2)* 0.05² * 4π² * f² * sqrt(100/0.04)
300 = 0.5*(4*10^-2) * 0.05² * 4π² * f² * sqrt(2500)
300 = 0.02 * 50 * 0.05² * 39.478417 * f²
300 = 0.0986960 * 0.05² * f²
f² = 300 / 0.0986960
f² = 3039.6355
f = sqrt(189.97722)
f = 55.132889
= 55.13 Hz
What is the displacement of an object during a specific unit of time.
Answer:
velocity
Explanation:
the displacement of an object during a specific unit of time.
Electron cloud configuration for
Answer:
electrons are located around the nucleus of an atom.
Explanation:
Electron configurations describe where electrons are located around the nucleus of an atom. For example, the electron configuration of lithium, 1s²2s¹, tells us that lithium has two electrons in the 1s subshell and one electron in the 2s subshell.
What is the sum of internal energy
Which element has the same number of valence electrons as krypton (Kr)?
fluorine (F)
chlorine (Cl)
neon (Ne)
selenium (Se)
The element that has the same number of valence electrons as krypton (Kr) is known as Neon (Ne). Thus, the correct option for this question is C.
What are Valence electrons?Valence electrons may be defined as the number of electrons present in the outermost shell of any atom during the time of electronic configuration. For example, Sodium has an atomic number of 11, its electronic configuration is 2, 8, and 1. It means that the valence electron on sodium is 1.
Neon and Krypton being the members of the same family which is known as noble gases or inert gases occupy the same valence electrons of eight in their outermost shell. It is group 8A of the periodic table. Apart from Ne, and Kr, other elements like argon, Xenon, and Radon also belong to the same family and occupy the same valence electron except for helium.
Therefore, the element that has the same number of valence electrons as krypton (Kr) is known as Neon (Ne). Thus, the correct option for this question is C.
To learn more about Valence electrons, refer to the link:
https://brainly.com/question/371590
#SPJ6
Question 7 of 25
A sound wave with a wavelength of 26 m passes through glass, and then it
passes into air, where its wavelength changes to 1.6 m. If the sound wave has
a constant frequency of 220 Hz, what is its approximate speed as it passes
through the air? (The equation for the speed of a wave is v= f *1.)
O A. 3,500 m/s
B. 350 m/s
O C. 5,700 m/s
O D. 570 m/s
Answer: 350 ms
Explanation:
Just took the quiz:)
Answer:
B. 350
Explanation:
In which number are the zeros not significant?
100.0
O 0.0003
O 4.00005
O 1.0004
Answer:
0.0003
Explanation:
In the rules of Sig Figs, all zeros before with decimals are not sigificant. I.E. 0.00000000000000009. Despite how many 0's there are, only the 9 is significant. Zeros before a number is not significant. In 100, only the one is signficant in 100. with a dot at the end, the one and the two zeros are significant. hope this helps.
Answers:
the second option
Explanation: