the radius of a sphere decreases at a rate of 6 m/sec. find the rate at which the surface area decreases when the radius is 20 m. recall that the surface area of a sphere of radius r is given by s

Using the theories of voltage, we got that ratio of N₂ / N₁ become 13.3 if we connect the galvanometer to the primary coil and the battery/switch to the secondary.

A transformer is the device that changes the voltage in the primary, causing a voltage to be induced in the secondary. The expression for this voltage ratio is given by

ΔV₂ = N₂ /N₁ ΔV₁

where N is the number of windings on each side of the coil and V2 and V1 are the voltages in the secondary and primary coil, respectively.

According to question  the primary voltage in this instance is 9.0 V and the secondary voltage is 120 V.

ΔV₂ /ΔV₁ = N₂ / N₁

N₂ / N₁ = 120/9

N₂ / N₁ = 13.3

Hence, if we connect the galvanometer to the primary coil and the battery/switch to the secondary, then the ratio of N₂ / N₁ become 13.3

To know more about voltage, visit here:

https://brainly.com/question/13521443

#SPJ4

(Complete question) is:

A 9.0-V battery (with nonzero resistance) and switch are connected in series across the primary coil of a transformer. The secondary coil is connected to a light bulb that operates on the 120 V. a)Determine the ratio of the secondary to primary turns needed for the bell's transformer. b)Determine the ratio of the secondary to primary turns needed for the bells transformer. Ns/Np=?c), In final part how would the effects differ if you connected the galvanometer to the primary coil and the battery/switch to the secondary? write out your answer in a clear and well supported paragraph.

Now our wavelength is getting longer because the waves are stretching out. This makes the 1. Frequency is lower as well as the pitch we hear.

Wavelength is the gap among equal factors (adjacent crests) in the adjacent cycles of a waveform sign propagated in the area or alongside a twine. In wi-fi systems, this duration is generally laid out in meters (m), centimeters (cm), or millimeters (mm).

Equation of the wavelength, we will tell that the wavelength of a wave is inversely proportional to its frequency, i.e., because the frequency of a wave increases, its wavelength decreases.

A better-frequency sound has a better pitch, and a decreased-frequency sound has a lower pitch. In discern 10.2 sound A has a better pitch than sound B. for example, the chirp of a bird would have an excessive pitch, but the roar of a lion could have a low pitch. The human ear can discover a huge variety of frequencies.

Learn more about wavelength here:-https://brainly.com/question/10728818

#SPJ4

Disclaimer:- your question is incomplete, please see below for the complete question.

Now our wavelength is getting longer because the waves are stretching out. This makes the _________ lower as well as the pitch we hear.

1. Frequency

2. Loudness

3. Amplitude

In order to maintain a constant altitude, constant velocity, thrust, and drag must all be equal.

In level flight, the aircraft slows down when the engine power is decreased and the thrust is decreased. The airplane keeps descending as long as the thrust is lower than the drag. In contrast to weight, lift works. The opposite of drag is thrust. A plane flies level flight when the forces are equalized. If the forces of lift and thrust are greater than the forces of gravity and drag, the plane rises.

The lift and push produced by an airplane while it is traveling straight and level at a constant speed balance its weight and drag, respectively.

Learn more about force here-

https://brainly.com/question/13191643

The horizontal speed of Tom when it slid off the table is 4.89 m/s.

The time of motion of Tom is the time taken for Tom to fall from the top of he table to ground level.

It can also be described as time spent in air by Tom.

h = ut + ¹/₂gt²

where;

h = 0 + ¹/₂gt²

h = ¹/₂gt²

t = √(2h/g)

t = √(2 x 1 / 9.8)

t = 0.45 s

The horizontal speed of Tom when it slid off the table is calculated as;

v = x/t

where;

v = (2.2 m) / (0.45 s)

v = 4.89 m/s

Learn more about horizontal speed here: https://brainly.com/question/24949996

#SPJ1

Using the concepts of momentum, we got that kinetic energy never be negative. The reason behind my possible answer is -It is always greater than or equal to zero. The kinetic energy of a moving object is equals one-half product of its mass and the square of its velocity. Since the mass of the object can never be zero, the square of velocity makes the answer positive.

Kinetic Energy (Key Points)

Hence, kinetic energy never be negative, the possible reason for my answer is that- The kinetic energy of the moving object equals one-half  product of its mass and the square of its velocity. Since the mass of the object can never be zero, the square of velocity makes the answer positive.

To know more about momentum, visit here:

https://brainly.com/question/24030570

#SPJ4

(Complete question) is:

can kinetic energy ever be negative? give a possible reason for your answer without making use of any equations.

Option C. At some height when the pendulum is displaced by some angle the total initial energy will be concerned with potential energy due to work by gravity against the displacement.

Potential energy is the energy held with the aid of an item because of its role relative to different objects, stresses within itself, its electric price, or other elements.

Potential energy saved energy that relies upon the relative role of diverse elements of a device. A spring has greater potential power whilst it is compressed or stretched. A metal ball has extra capability power raised above the floor than it has after falling to Earth.

Learn more about potential energy here:-

#SPJ4

Disclaimer:- your question is incomplete, please see below for the complete question.

In the lab, we applied the conservation of energy to a system to allow us to equate the initial energy to the final energy. How does the initial energy become stored in the system?

A. The energy is supplied by the tension in the string

B. The energy is part of mass

C. The force of gravity does work when it is displaced some height when the pendulum is displaced by some angle theta

D. I did work on the mass by displacing it some height when I displaced the pendulum by some angle theta.

The force produced by the weight as it stretches the spring from 0.3 m to 0.4 m is 1.5 N

F = k x

F = Force

k = Stiffness

x = Displacement

x1 = 0.3 m

x2 = 0.4 m

x = x2 - x1

x = 0.4 - 0.3

x = 0.1 m

k = 15 N / m

F = 15 * 0.1

F = 1.5 N

Therefore, the force produced by the weight is 1.5 N

To know more about spring force

https://brainly.com/question/14655680

#SPJ4

Yes, the objects with the same velocity and mass experience more force when stopping or when changing direction.

Heavier objects that have more mass are more difficult to move and stop as compared to other objects. Heavier objects have greater mass and resist more change as compared to lighter objects. For example, Pushing a bicycle or stopping them once moving. The objects having more mass, it is harder to start or stop.

The momentum of a moving object increases with the increase of mass and its speed. The heavier object moves faster and has greater momentum and it the harder to stop it. For example, if a truck and a car are traveling at the same speed, more force is needed to stop the truck because its greater mass provides more momentum.

So we can conclude that the bodies with the same velocity experience more force while stopping.

Learn more about velocity here: https://brainly.com/question/80295

#SPJ1

An elastic collision is a collision wherein there may be no net loss in kinetic energy in the machine due to the collision. every momentum and kinetic power are conserved quantities in elastic collisions.

An elastic collision is a come among bodies in which the overall kinetic power of the two bodies stays identical. In an ideal, perfectly elastic collision, there may be no internet conversion of kinetic strength into other kinds which includes heat, noise, or capacity electricity.

Elastic collisions arise whilst both the momentum and kinetic energy are conserved, just like how billiard balls bounce off each different and move at the same speeds as earlier. Inelastic collisions appear whilst simplest the momentum is conserved but not the kinetic power.

Learn more about elastic collision here:-https://brainly.com/question/7694106

#SPJ4

An estimation of the amount of random error is + 1.08  g/cm³.

An error is taken into consideration randomly if the value of what's being measured every now and then goes up or once in a while goes down. a completely simple example is our blood pressure. although someone is wholesome, it is regular that their blood stress does now not continue to be exactly equal whenever it is measured.

Random errors are likewise referred to as variability, random version, or 'noise inside the device'. The heterogeneity within the human population results in exceedingly huge random variations in scientific trials. Systematic mistakes or bias refers to deviations that are not because of the threat alone.

Given data,

the mean value

Here, X = Σsum of all values/number of values

And, error = measured value - X

∴ error in the first result will be Δx = 15830 - 14,75

                                                       = + 1.08  g/cm³

Learn more about random errors here:-https://brainly.com/question/13201098

#SPJ4

Disclaimer:- your question is incomplete, please see below for the complete question.

several groups of students used the same procedure to measure the density of a specific object. the 15 different results are listed below in units of g/cm3. at a 95% confidence interval, give an estimation of the amount of random error present in any single result of this procedure.

15.830

15.700

14.112

12.783

15.586

14.723

14.526

14.524

14.805

17.985

16.186

13.925

12.553

14.175

13.837

The spring constant is 13 N/m

What is the spring constant?

Simple harmonic motions as well as Hooke's law are related to the definition of the spring constant. Therefore, we must first examine Hooke's law before attempting to define the spring constant as well as comprehend how it functions. As long as the applied load is below the elastic limit, a spring will naturally extend in proportion to the applied load, according to the theory of elasticity. We now understand that when an object is subjected to force, it tends to deform in some way. Consider a spring. Because springs are elastic, they will be compressed when we apply force to one side of the spring. The spring now expands to its original size by applying force in the opposite direction of the applied force.

T= 2*pi sqrt (m/K)

0.725=2*pi*sqrt (0.175/K)

K=13 N/m

Hence the spring constant is 13N/m
To learn more about the spring constant the link is given below:
https://brainly.com/question/13198971
#SPJ4

The lens does have an outer radius of 1.65 cm or an inner radius of 5.85 cm, with an index of refraction of 1.50. then f=20cm is the focal length.

Between lens & glass, lens is the preferred spelling, whilst lense is an error. A lens can be a piece of bent glass or plastic, a component of a camera, or even the clear portion of your eye. Lense, on the other hand, is merely a typo and not a real word.

In optics, a lens is a piece of glass or another transparent material that focuses light from an object to create an image of it.

To know more about Lens visit:

https://brainly.com/question/766997

#SPJ4

From the calculation, there is a net force that acts on the car and then the acceleration that is produced by the net force is 0.296 m/s^2.

The term net force refers to the force that is acting on an object that makes it to move. We have to recall that the force of friction is the force the limits the motion of an object. In other words, it is the force of friction that makes a body not to be able to move and this must be overcome by the forward force when it is greater than the friction force.

Now;

Mass of the car = 1352 kg

Forward force = 7820 N

Coefficient of friction = 0.56

Frictional force = μmg

= 0.56 * 1352 kg * 9.8 m/s^2

= 7419.8 N

Net force = Forward force - Frictional force

= 7820 N -  7419.8 N

= 400.2 N

Then;

Net force = ma

m = mass

a = acceleration

a = Net force/m

a = 400.2 N/ 1352 kg

a = 0.296 m/s^2

Learn more about net force:https://brainly.com/question/18109210

#SPJ1

The distance of the plates apart is 0.029 m.

We know that the electric potential has to do with the energy that is required to move a unit positive charge from one point to another in the electric field.

Now we have the following parameters from the questions;

Voltage applied = 125 V

Electric field = 4.25 × 103 N /C

Distance apart = ??

Now we know that we have to use the formula that says;

E = V/d

E = Electric field

V = Voltage applied

d = Distance apart

When we make d the subject of the formula;

d = V/E

d = 125 V/4.25 × 10^3 N /C

d = 0.029 m

Learn more about electric potential:https://brainly.com/question/9383604

#SPJ1

A related right-hand rule relates the rotational direction to the torque direction. Your fingers will curl in the rotational direction if you point your thumb in the direction of the torque.

Positive torques cause counterclockwise rotation while negative torques cause clockwise rotation. Because T1 is smaller than T2, the net torque would point in a clockwise direction. The system would start to accelerate clockwise if it were initially at rest. The torques in Example 2 are not in equilibrium because there is a net torque. The rotational equivalent of force is torque. So an object will rotate with an angular acceleration in response to a net torque.

Learn more about torque here-

https://brainly.com/question/29024338

#SPJ4

Based on the current understanding of this operon, James might find it useful to test the idea that adding all lactose to the media for bacterial growth will hasten the rate at which the bacteria break down lactose. So, choosing one is the right one.

When expressed, the lac operon is a group of genes that creates the machinery for lactose metabolism. However, it chooses to use glucose as its sugar by metabolizing it. As a result, the cell does not need to develop this machinery while glucose is accessible because it won't use it. Instead, it will metabolize the glucose. However, the E. coli must be able to absorb this lactose when we add it in place of glucose, or else it won't be able to develop using the added energy source. So, we have a few different circumstances. We do not want to express the lac operon when glucose but not lactose is present. We do want to express the lac operon when glucose is removed and lactose is added, though.

Thus, we can conclude that adding allolactose to the bacterial growth medium should speed up how quickly the bacteria break down lactose.

LEARN MORE ABOUT OPERON HERE:

https://brainly.com/question/14331566

#SPJ1

Answer: Its A  Addition of allolactose (inducer) to the bacterial growth media should increase the speed at which the bacteria metabolize the sugar lactose.

Explanation: yes

The floating substance will  displaces some liquid and so when the ice melts ,there will be no change in the water level as the melted ice will occupy the same volume as it was occupying earlier.

What is Archimedes’ law of buoyancy?

Archimedes’ principle can be defined as any body when completely or partially submerged in a fluid (gas or liquid) at rest is acted upon by an upward force. It is usually equal to the weight of the fluid displaced by the body.

Apparent weight= Weight of object (in the air) – Thrust force (buoyancy)

It is used in the design  of ships and submarines. Hydrometers are based on the principle of Archimedes.

Applications of Archimedes’ principle

The above case works on Archimedes principle leading to no change in water level.

To know more about Archimedes principle from the given link

https://brainly.com/question/787619

#SPJ4

As the text cites, atoms are incredibly tiny, numerous, perpetually moving, and Ageless.

An atom consists of a nucleus and one or extra electrons bound to the nucleus. The nucleus is made from one or more protons and a number of neutrons. best the maximum common form of hydrogen has no neutrons. An atom is the smallest unit of everyday relied on that forms a chemical element.

An atom is a particle of being counted that uniquely defines a chemical element. An atom consists of an important nucleus that is surrounded by means of one or extra negatively charged electrons. The nucleus is undoubtedly charged and incorporates one or extra particularly heavy particles called protons and neutrons.

Learn more about atoms here:-https://brainly.com/question/621740

#SPJ4

The average temperature over the past 1000 years has been about 15∘c, from the graphs, you can conclude that the earth's average temperature during the past 800,000 years has varied between about 7∘C and 19∘C.

The earth’s average temperature record illustrates the variations in ocean and atmosphere temperatures throughout a range of historical periods. Since the end of the Pleistocene glacier, many estimations of temperature have been made, especially for the current Holocene epoch. Geologic data that dates back millions of years provides some temperature information. Ice core data, which is more recent, covers the time from 800,000 years ago to the present.

Paleoclimate research spans the time from 12,000 years ago to the present. The global temperature from 1,000–2,000 years ago till the present can be determined through observations taken from ice cores and tree rings. The most thorough records date back to 1850 when meticulous thermometer-based recordings first started.

To learn more about earth’s average temperature visit here:

brainly.com/question/893891

#SPJ4

Number of Fluid ounces in 3 Liters of water is approximately 101.

Volume of water = 3 Liters

Volume of water (in milliliters) = 3 x 1000 = 3000 ML

The volume of water in 1 ounce = 29.6 ML

Number of ounces in 3000 ML  = [tex]\frac{3000}{29.6}[/tex]

                                                     =  101.35 ounces

                                                     ≈ 101 ounces

Therefore, there are 101 fluid ounces in 3 liters of water and option

B is the correct choice.

Learn more about fluid ounces here-

https://brainly.com/question/17049544

#SPJ4

The tension in the cord is 4.318 N.

What is a tension?

In physics, tension is defined as the pulling force that is transmitted axially by a string, rope, chain, or similar object, or by each end of a rod, truss member, or other comparable three-dimensional object. Tension can also be defined as the action-reaction pair of forces acting at each end of the aforementioned elements. The polar opposite of compression might be tension. The International System of Units (SI) uses newtons to measure tension as a transmitted force, an action-reaction pair of forces, or a restoring force (or pounds-force in Imperial units).

V= distance/ time

7.5/0.78= 9.62 m/s

T= v^2 m/ l

= (9.62)2 0.35/ 7.5

= 32.39054/ 7.5

= 4.318N

To know more about tension, click the link given below

https://brainly.com/question/24994188

#SPJ4

By bring their legs close to their bodies, they are decreasing the length of the pendulum which help them move more quickly.

A pendulum is nothing but a body suspended from a fixed point so that it can swing back and forth under the influence of gravity.

Here in this case Gibbons are bringing their legs close to their bodies and reducing the length of the pendulum. Since as the length of the pendulum increases the speed of the movement will be reduced. By bringing their legs close to their bodies they are reducing the length and in turn their speed increase and they move quickly.

To learn more about pendulum, visit here

https://brainly.com/question/14759840

#SPJ4

Answer:

B. 8 years

Explanation:

D = 1 a.u. - Distance from the Sun to the Earth in astronomical units (a.u.)

D₁ = 4 a.u - Distance from the Sun to the planet

T = 1 year - The period of the earth's revolution around the Sun

__________

T₁ - ? - The period of revolution of the planet around the Sun

Kepler's law

(T₁/T)² = (D₁/D)³

(T₁ / 1)² = (4 / 1)³

T₁² = 64

T₁ = √ 64 = 8 years

B. 8 years

The relationship between the planet's period and the Earth's period and cube root of the ratio between the planet's distance from the Sun and the Earth's distance from the Sun.

Kepler's third law is the theory applied to this puzzle.

Write the expression for the period of the planet first using Kepler's rule to take into account the period of the Earth, the distance from the Sun to the Earth, and the distance from the Sun to the planet.

To compute the period of the planet, finally, substitute the appropriate quantities. The relationship between the period and the separation between the Sun and the planet is provided by, in accordance with Kepler's third law: T² ∝ a³

T is the period in this case, and an is the separation between the planet and the Sun.

To know more about Kepler's third law, click on the link below:

https://brainly.com/question/6867220

#SPJ4

The sphere energy decreases as the distance from the source increases.

A magnetic field is a vector subject that describes the magnetic effect on transferring electric charges, electric currents, and magnetic materials. A moving charge in a magnetic field story a force perpendicular to its very own pace and to the magnetic discipline.

The magnetic area is a area around a magnetic cloth or a moving electric powered rate inside which the pressure of magnetism acts. A magnetic subject is a force discipline that is created via transferring electric prices and magnetic dipoles and exerts a pressure on different close by shifting prices and magnetic dipoles.

Magnetic fild, a vector area  of a magnet, electric current, or converting electric discipline, wherein magnetic forces are observable.

Learn more about magnetic fields here:-https://brainly.com/question/14411049

#SPJ4

Answer:

820 feet

Explanation:

.25 km = 820 feet

To learn the magnitude and gravitational force to calculate the distance.

What is magnitude?

The most straightforward way to define magnitude is "distance or quantity." In either an absolute or relative sense, it displays the size or motion of an object. It serves as a way to convey the size or scope of something. Magnitude typically refers to a size or length.

What is gravitational force?

Newton's universal law of gravitation states that the force of attraction between any two bodies is inversely proportional to the square of the distance between them and directly proportional to the product of their masses.

G is the gravitational constant 6.67 × 10^-11 Newtons kg-2 m2.

M is the mass of the first object

m is the mass of the second object

r is the distance between them.

In this question.

two g-kg masses are separated by 5 meters.

So F=G(5kg)(5kg)/(5^2)=6.67*10^-11 (newtons)

Therefore, the gravitational force between two 5.0-kilogram masses separated by a distance of 5.0 meters is 6.67*10^-11 (newtons).

Learn more about magnitude from the given link.

https://brainly.com/question/24256733

#SPJ4

1.55 x 10⁻⁶ F is the capacitance if both slices of dielectric material are placed between the plates.

An indicator of a substance or material's capacity to store electrical energy is its dielectric constant. It is a measurement of how much an object can hold or concentrate an electric flux. Dielectric constant is defined mathematically as the ratio of a material's permittivity to the permittivity of free space.

For one slice, we have

thickness, d₁ = 0.0025 x 10⁻³ m

dielectric constant, k₁ = 6.2

breakdown field strength, E₁ = 7.15 x 10⁶ V/m

For second slice, we have

thickness, d₂ = 0.0085 x 10⁻³ m

dielectric constant, k₂ = 10.7

breakdown field strength, E₂ = 3.15 x 10⁶ V/m

(a) The capacitance of each possible choice which is given as :

For one slice ; C₁ = k₁o A/d₁ = (6.2) (8.85 x 10⁻¹² C²/Nm²) (0.047 m²) / (0.0025 x 10⁻³ m)

C₁ = 1031.5 x 10⁹ F

C₁ = 1.03 x 10⁻⁶ F

For second slice; C₂ = k₂0 A / d₂ = (10.7) (8.85 x 10-12 C²/Nm²) (0.047 m²) / (0.0085 x 10⁻³m)

C₂ = 523.6 x 10⁻⁹ F

C₂ = 5.23 x 10⁻⁷ F

{one slice will have a greater capacitance than second slice }

(b) The maximum working voltage for each capacitor is given as :

For one slice; E₁ = V₁ /d₁⇒ (7.15 x 10⁶ V/m) = V₁ / (0.0025 x 10⁻³ m)

V₁ = 17.8 V

For second slice; E₂ = V₂/d₂ (3.15 x 10⁶ V/m) = V₂ / (0.0085 x 10⁻³ m)

V₂ = 26.7 V

If both slices of dielectric material are placed b/w the plates, then the capacitance will be

given as:

Ctotal = C₁ + C₂ = [(1.03 x 10⁶ F) + (5.23 x 10⁻⁷ F)]

Ctotal = 1.55 x 10⁻⁷ F

To know more about dielectric constant visit:

https://brainly.com/question/13265076

#SPJ4

Carol Bill had a stronger lift than Bob (1400 N x 2.0 m / 2.0 s = 1400 W vs. 1000 N x 1.5 m / 1.0 s (= 1500 W).

The All-America Football Association (AAFC) team from Buffalo that bore the same moniker as the western frontiersman Buffalo Bill is whence the Bills got their name. The Bills have been the only NFL club that holds home games in Western New York and draw a sizable portion of their fan base from there.

William's short form (hypocorism), Bill, is a male given name that is typically used for boys. It can also be used as an English translation of the common Greek name Vasilis and Vasileios (Basil), particularly among Greek immigrants in Language nations, perhaps as a result of the similarity in pronunciation.

To know more about bills visit:

https://brainly.com/question/20692894

#SPJ4

Answer:

Explanation:

Given:  

c₁ = 2100 J / (kg·°C)

c₂ = 4200 J / (kg·°C)

λ₁ = 3.4·10⁵ J / kg -

t₁ = -24.2°C

t₀ = 0°C

t₂ = 78.3°C

t = 40.0°C

m₂ = 0.350 kg

___________

m₁ - ?

Ice is heated to 0°C:

Q₁ = c₁·m₁·(t₀ - t₁) = 2100·m₁·(0 - (-24.2)) = 50 820·m₁  J

The ice is melting:

Q₂ = λ·m₁ = 340 000·m₁  J

Cold water is heated:

Q₃ = c₂·m₁·(t - t₀)  = 4200·(40.0 - 0)·m₁ = 168 000 J

Hot water is cooling down:

Q₄ = c₂·m₂·(t₂ - t) = 4200·0,350·(78.3 - 40.0) = 56 300 J

Thermal badance equation:

Q₁ + Q₂ + Q₃ = Q₄

m₁·(50820 + 340 000 + 168 000) = 56 300

m₁·(3 620 000) = 56 300

Mass of ice:

m₁ = 56 300 / 3 620 000 ≈  0,016 kg  or  16 g

sentence describes an interaction between two of Earth’s spheres are given below

Geosphere and hydrosphere - water vapor condenses on a glass.

Hydrosphere and biosphere - Grady swims in the ocean.

Biosphere and atmosphere - Lena takes a deep breath

Atmosphere and geosphere - gusty winds weather sandstone in the desert.

Geosphere refers to the solid portion of the Earth, therefore rocks, land, and the like would be included. Water is a component of the hydrosphere, as indicated by the word hydro, which means water. The atmosphere comprises the winds and the air that surrounds us. The term "biosphere" describes the biotic elements. We consider living things since the word "bio" signifies "life." All those spheres now interact with one another, and it is because of these interactions that our universe is created and how life on Earth can coexist. Grady is a living creature, and the ocean is composed of water, as can be shown by comparing the characteristics of each sphere.

To know more about  biosphere visit : https://brainly.com/question/15083566

#SPJ1