Answer:
A barium atom would be expected to contain 2 electrons in its outer energy level.
Explanation:
The columns of the periodic table are called groups. There are eighteen groups, numbered from 1 to 18.
The elements of each group have the same number of electrons in their last atomic shell, which is why they have similar chemical properties, because the chemical properties of chemical elements are strongly related to the electrons located in the last atomic shell.
That is, in a group, the chemical properties are very similar, because all the elements of the group have the same number of electrons in their last or last shells.
A barium atom would be expected to contain 2 electrons in its outer energy level.
How many grams are present in 2.5 moles of silicon
Answer:
70.21375
Explanation:
rounded to he nearest tenth place 70.2
Part b (r)–3-chloro-2-methylhexane will undergo a nucleophilic substitution reaction in the presence of sodium ethoxide and ethanol. complete the mechanism for the sn2 reaction and draw the products of the reaction. draw all missing reactants and/or products in the appropriate boxes by placing atoms on the grid and connecting them with bonds and including charges where needed. indicate the mechanism by drawing the electron-flow arrows on the molecules. arrows should start on an atom or a bond and should end on an atom, bond, or where a new bond should be created.
Answer:
See answer below
Explanation:
To understand this, we need to make the reaction involved with the given configuration. Configuration R means that the substituents of the molecule, the priority order goes clockwise (From heaviest to lightest) so, if an Sn2 is ocurring in the reaction this means that the nucleophile, which in this case, is the sodium ethoxide will attack the molecule in the opposite side of the leaving group (which is the chlorine).
Also when this occurs, as Sn2 is a bimolecular reaction and is held in one step, it occurs an inversion in the configuration of the product. So, it's the innitial reactant was R, then the final product will be S.
The mechanism and product can be watched in the attached picture
Hope this helps.
50 POINTS TO WHO ANSWERS THIS!!!
Select from the drop-down menu to correctly complete the sentence.
In order for a chemical reaction to take place, a certain amount of must be present.
A) Catalyst
B) Concentration
C) Surface Area
D) Temperature
Answer:
Temperature
Explanation:
C3Hg + 02 → CO2 + H2O
This chemical equation represents the combustion of propane. When correctly balanced, the coefficient for water
is
16.
2.
8.
4.
Answer:
4
Explanation:
The following equation, which depicts the combustion of propane, is given in this question as follows:
C3H8 + 02 → CO2 + H2O
However, this equation is not yet BALANCED because the number of atoms of each element is not the same on the reactant and product side. To balance the equation, we make use of COEFFICIENT to ensure that the number of atoms of each element on both side correlates.
The balanced equation is as follows:
C3H8 + 502 → 3CO2 + 4H2O
Therefore, the coefficient for water (H2O) after balancing the equation is 4.
The study of chemicals is called chemistry.
The correct answer is D.
The equation is not yet BALANCED because the number of atoms of each element is not the same on the reactant and product sides.
To balance the equation, we make use of COEFFICIENT to ensure that the number of atoms of each element on both sides correlates.
After balancing the equation is as follows:
[tex]C_3H_8 + 50_2 → 3CO_2 + 4H_2O[/tex]
Hence, the correct answer is 4 which shows the balanced water.
For more information, refer to the link:-
https://brainly.com/question/12985618
In mass-volume and volume-mass calculations, all gases are
considered to be at standard
____
and pressure, also
referred to as
___
answer: temperature, stp
:P
Answer: temperature, Stp
Explanation:
The calculation for standard temperature and pressure has been referred to as STP.
The mass-volume and volume-mass, has been the measurement of the concentration of the solution.
The mass-volume has been the measurement of mass of sample in the volume of solution. The volume by mass has been the measurement of the volume of solute to mass of solution.
Standard conditionsThe measurement has been performed with the standard conditions of temperature and pressure.
The standard temperature has been 273.5 K and standard pressure has been 1 atm. These temperatures and pressure has been referred to as STP.
Thus, the calculation for standard temperature and pressure has been referred to as STP.
Learn more about standard conditions, here:
https://brainly.com/question/2142674
Are most snakes venomous or nonvenomous?
Answer:
nonvenomous
Explanation:
Answer:
Around a quarter of all snake species are identified as being venomous. Most are harmless, but others have potent venom and at least five species, including the boomslang (Dispholidus typus), have caused human fatalities.
Explanation:this what go ogle has to say
How many hydrogen molecules are in 1.2 moles of hydrogen?
Answer:
7.22 x 10²³molecules
Explanation:
Given parameters:
Number of moles of hydrogen = 1.2moles
Unknown:
Number of molecules of hydrogen = ?
Solution:
From the concept of moles, a mole of a substance contains the Avogadro's number of particles.
1 mole of a substance = 6.02 x 10²³ molecules;
So; 1.2 moles of hydrogen = 1.2 x 6.02 x 10²³ molecules;
= 7.22 x 10²³molecules
In the Martian movie, how did the NASA discover Watney is alive?
Answer:
In the film version, they discover that he is still alive by noticing two things on the satellite imagery:
The Rover has been moved from where it was parked originally (prior to the evacuation)
The solar panels had been cleaned.
They also spotted tents attached to the hab for growing potatoes. In the film, the potatoes were grown completely inside the HAB, so no external tents would have been seen by the satellite.
Jana is modeling mutations using the word "FRIEND."
Which version of the word "FRIEND' models a deletion mutation?
A FRIENDS
B. DRIEND
C. FIEND
D. DNEIRF
Answer:
It is c I am doing the test I hope this helps ; )
Explanation:
Answer:
c
Explanation:
The phase that occurs beyond the critical point is:
A. Liquid
B. Solid
C. Gas
D. All of the above
Answer:
C. Gas
Explanation:
A supercritical fluid occurs beyond the temperature of critical point, wherein the state matter transitions from liquid to gaseous phase interchangeably. Whereas, triple point occurs when all three states of matter: solid, liquid nd gas; coexist.
Hence the answer to the question is Gaseous phase/
I hope you found this helpful.
Over the past week, Anna has been very curt with shondra, and when she ask if she has done something to offend her, Anna tersely replies, "no, everything is fine" what should shondra do
Answer:
A. avoid talking to Anna altogether and stay out of her way
B. ask her manager for advice
C. check with Gary to see if there is any gossip about what's going on with Anna
D. take a curt approach of her own to show Anna how it feels
Explanation:
ANSWER: B.
Physical and chemical properties are used to describe and identify matter. Physical properties can be observed without changing the identity of the substance. Chemical properties can be observed by attempting to change the identity of a substance. What are two physical and chemical properties that you can use to help you identify a substance?
Extensive properties, such as mass and volume, depend on the amount of matter that is being measured. ... Both extensive and intensive properties are physical properties, which means they can be measured without changing the substance's chemical identity
When 80.0 grams of calcium chloride react with silver nitrate, how many grams of silver
chloride are produced?
CaCl2 + 2 AgNO3 - Ca(NO3)2 + 2 AgCI
Answer:
Mass = 206.38 g
Explanation:
Given data:
Mass of calcium chloride = 80.0 g
Mass of silver chloride formed = ?
Solution:
Chemical equation:
CaCl₂ + 2AgNO₃ → Ca(NO₃)₂ + 2AgCl
Number of moles of CaCl₂:
Number of moles = mass/molar mass
Number of moles = 80.0 g/ 110.98 g/mol
Number of moles = 0.72 mol
Now we will compare the moles of CaCl₂ and AgCl
CaCl₂ : AgCl
1 : 2
0.72 : 2/1×0.72 = 1.44 mol
Mass of silver chloride:
Mass = number of moles × molar mass
Mass = 1.44 mol × 143.32 g/mol
Mass = 206.38 g
What colors are absorbed Best Buy the plant gizmo
Answer:
Yellow and Green
Explanation:
It is not blue the graph shows is isnt blue so the colors that absorbed the worse were green and yellow
Blue and red are the colors that plants can absorb the most. The pigments used for photosynthetic processes, such as chlorophyll in plant cells' chloroplasts, are what absorb particular visible-spectrum light wavelengths.
The energy of specific light wavelengths is absorbed by special pigments in chloroplasts of plant cells, resulting in a chemical chain reaction that is known as the light-dependent process of photosynthesis. The best visible light wavelengths for photosynthesis are in the blue (425–450 nm) and red (600–700 nm) ranges.
Chlorophylls do not absorb light at green and yellow wavelengths, as shown by the extremely low level of light absorption between 500 and 600 nm.
To know more about chlorophyll, visit;
https://brainly.com/question/15867555
#SPJ6
When two atoms are bonded and have a large difference in electronegativity:
HELP PLEASEEE
Answer:
Second option - The bond is very polar
Explanation:
Electronegativity of an basically refers to the degree at which an electron is able to attract electrons to itself.
There are different types of bonds between atoms, depending on the electronegativity of the atoms.
When there is a large difference in electronegativity, it pretty much means that one atom would draw electrons more than the other. When this happens, the bond is said to be polar because there is uneven distribution of the charges.
The second option is the correct answer in thus question.
Magnesium reacts with iron chloride solution. Calculate the mass of iron produced in mg
Answer: 0.000187 mg of iron is produced.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} Mg=\frac{0.120g}{24g/mol}=0.005moles[/tex]
[tex]3Mg+2FeCl_2\rightarrow 2Fe+3MgCl_2[/tex]
As [tex]FeCl_2[/tex] is the excess reagent, [tex]Mg[/tex] is the limiting reagent.
According to stoichiometry :
3 moles of [tex]Mg[/tex] give = 2 moles of [tex]Fe[/tex]
Thus 0.005 moles of [tex]Mg[/tex] give =[tex]\frac{2}{3}\times 0.005=0.0033moles[/tex] of [tex]Fe[/tex]
Mass of [tex]Fe=moles\times {\text {Molar mass}}=0.0033moles\times 56g/mol=0.187g=0.000187mg[/tex] (1g=1000mg)
Thus 0.000187 mg of iron is produced.
A 475 cm3 sample of gas at standard temperature and pressure is allowed to expand until it occupies a
volume of 600. cm3. What temperature would be needed to return the gas to standard pressure?
The final temperature : 345 K
Further explanationGiven
475 cm³ initial volume
600 cm³ final volume
Required
The final temperature
Solution
At standard temperature and pressure , T = 273 K and 1 atm
Charles's Law :
When the gas pressure is kept constant, the gas volume is proportional to the temperature
V₁/T₁=V₂/T₂
Input the value :
T₂=(V₂T₁)/V₁
T₂=(600 x 273)/475
T₂=345 K
What is the charge of an electron?
Trees, birds, and bacteria are all similar because they are all formed from
Answer:
Cells or atoms
Explanation:
Answer:
are made of one or more cells.
need energy to stay alive.
respond to stimuli in their environment.
grow and reproduce.
maintain a stable internal environment.
Explanation:
Plz brainliest
Magnesium ions for ionic bonds with fluoride ions in a 1:2 ratio. Explain how electrons are transferred between atoms and how the ionic bonds form in this compound.
I hope this helps......
A 475 cm3 sample of gas at standard temperature and pressure is allowed to expand until it occupies a
volume of 600. cm3. What temperature would be needed to return the gas to standard pressure?
The final temperature : 345 K
Further explanationGiven
475 cm³ initial volume
600 cm³ final volume
Required
The final temperature
Solution
At standard temperature and pressure , T = 273 K and 1 atm
Charles's Law :
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
Input the value :
T₂=(V₂T₁)/V₁
T₂=(600 x 273)/475
T₂=345 K
The reaction with hydrogen with oxygen produces water: 2 H2 + O2 ---> 2H20. How many moles of O2 are required to react with 2.0 mol of H2? *
o2 is made and hydrogen help make it
what is a solution for deforestation
(full sentences please)
The best solution to deforestation is to curb the felling of trees by enforcing a series of rules and laws to govern it. Deforestation in the current scenario may have reduced; however, it would be too early to assume. The money-churner nature of forest resources can be tempting enough for deforestation to continue.
The best solution to deforestation is to curb the felling of trees by enforcing a series of rules and laws to govern it. Deforestation in the current scenario may have reduced; however, it would be too early to assume. The money-churner nature of forest resources can be tempting enough for deforestation to continue.
Which observation shows that a substance is malleable
(A) the substance breaks apart when stretched
(B) the substance shatters when hit with a hammer
(C) the substance flattens when hit with a hammer
(D) the substance can be stretched easily into wires
Answer:
B
Explanation:
Answer:
It is C: the substance flattens out when struck with a hammer
Explanation:
why can nuclear fusion occur in the core of a star
Answer:
When the core is hot enough, nuclear fusion commences. Fusion is the process where two hydrogen atoms combine to form a helium atom, releasing energy. ... This is because a single helium atom contains less mass than two hydrogen atoms. The excess mass is released as energy.
5. Determine if each statement is true or false about forming a hypothesis:
a. It must be long.
b. It is an educated guess.
c. It is in if…then format.
d. It must be testable.
e. It must start with I think.
Answer:
A: false
B: true
C: false
D: true
E: false
Explanation:
it doesn't necessarily need to be long but if it needs to be an educated guess, it has to be testable because you need to know if your hypothesis is true or not and "it doesn't need to start with "I think ...", it is must better with "if I do this ..." .
Consider the double replacement reaction given below: HgNO3(aq) + KBr(aq) → HgBr (??) + KNO3(??)The state of matter for HgBr would be
Answer: The state of maater for HgBr is solid.
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.
The balanced chemical equation is:
[tex]HgNO_3(aq)+KBr(aq)\rightarrow HgBr(s)+KNO_3(aq)[/tex]
Is baking soda an acid, base, or neutral
Answer:
Baking soda is an alkaline, or base, substance. This means that when we dissolve baking soda in water, it forms an alkaline solution. For example, a 0.1 molar solution of baking soda has a pH of around 8.3. Lemon juice contains citric acid and has a pH of around 3.
When 25.0 g of Mg with 25.0 g of l2, what was the limiting reactant? How many grams of the limiting reactant are left over? How many grams of the other reactant (in excess) is left over?
Limiting reactant = I₂
Mass of Mg leftover = 22.628 g
Further explanationGiven
Reaction between 25.0 g of Mg with 25.0 g of l₂
Required
The limiting reactant
mass of limiting and excess left over
Solution
Reaction
Mg + I₂⇒ MgI₂
mol Mg = 25 g : 24.305 g/mol = 1.029
mol I₂ = 25 g : 253.809 g/mol = 0.098
Limiting reactant = I₂
Excess reactant = Mg
The limiting reactant will be used up
Mol excess(unreacted) :
=1.029 - 0.098
=0.931
Mass I₂ left over :
= 0.931 x 24.305
= 22.628 g
How many torr, atms, and psi is 303.9 kPa equal to?
Torr=
Atms=
Psi=
I'LL NAME YOU BRAINLIEST AND GIVE YOU 20 POINTS, IF YOU HELP ME SOLVE THIS PROBLEM!!!!! /^?^/ !!!
Answer:
2.99 atm
2279.43 torr
44.07 psi
Explanation:
Torr, atms and psi all units are units of pressure.
Conversion from KPa to atm:
1 KPa is equal to 0.00987 atm. To convert from KPa to atm we will multiply the given value with 0.00987 atm.
303.9 KPa × 0.00987 atm / 1 KPa
2.99 atm
Conversion from KPa to torr:
1 KPa is equal to the 7.5006 torr. To convert from KPa to torr we will multiply the KPa value by 7.5006.
303.9 KPa × 7.5006 torr/ 1 KPa
2279.43 torr
Conversion from KPa to psi:
psi is pound per square inch. 1 KPa is equal to the 0.1450 psi. To convert from KPa to psi we will multiply the KPa value by 0.1450 psi.
303.9 KPa × 0.1450 psi / 1 KPa
44.07 psi