The potential difference between the (high-voltage) inner shell of a Van de Graaff accelerator and a point where the charge is injected into the moving belt is 3.4 MV. What is the minimum power required to pull the belt when the belt transfers the charge to the case at 2.8 mC/s?

Blood Type O AB

Probability 0.45 0.04

Ice wedging, as described in the passage, is an example of mechanical

weathering.

Mechanical weathering is also known as physical weathering and it

involves the breaking of rock into smaller particles without causing changes

in the chemical properties.Mechanical weathering is usually carried through

physical processes such as freezing and thawing etc.

In this scenario, we were told that water freezes, expands and presses

against the walls of the crack thereby breaking into smaller parts which is a

physical process hence mechanical weathering being present.

Read more about Mechanical weathering on https://brainly.com/question/458304

Answer:

Explanation:

Well which is it ? ρ = 1000 kg/m³ or ρ = 1025 kg/m³?

Obviously the sea is salt water so we can ignore  ρ = 1000 kg/m³

1025 kg/m³(d  m)(9.81 N/kg) = 1 x 10⁵ N/m² = Pa

d = 9.9450535...

d = 10 meters

That's if we only account for the pressure due to the water. On top of that pressure would be atmospheric pressure which is about 101000 Pa

so the robot would be a hair above its pressure limit before it even got in the water.

Answer:

Transverse waves oscillate perpendicular to the direction of the wave (e.g. any electromagnetic wave like radiowaves, x-rays...) whilst compressional waves oscillate in the same direction of the wave (e.g. sound waves)

Explanation:

[tex]\huge \bf༆ Answer ༄[/tex]

The Correct choice is ~ A

If an object moves at a constant velocity, then the change in velocity over the time is 0, Acceleration is defined as rate of change in velocity but since there is no change in velocity, the value of Acceleration is equal to Zero.

σ = F/A = F/ (πD²/4) = 20000 / (π0.10²/4) = 2.55 MN/m²

Answer:

Skeletal Muscle cells

Skeletal muscle cells are long, cylindrical, and striated. They are multi-nucleated meaning that they have more than one nucleus. This is because they are formed from the fusion of embryonic myoblasts.

Answer:

skeletal muscle cells can have multiple nuclei

Explanation:

This is because they are formed from the fusion of embryonic myoblasts.

Answer:

H = Vy t - 1,2 g t^2            formula for height of ball after t sec

H = 10 - 1.3 = 8.7 m

Vy = 27 sin 47 = 19.7 m/s     vertical speed of ball

8.7 = 19.7 t - 9.8/2 t^2       height of ball after t sec

4.9 t^2 - 19.7 + 8.7 = 0       rearranging

[19.7 ± (388 - 170)^1/2] / 2 *4.9 = [19.7 ± 14.7] / 9.8 = .51 ,3.5 sec

.51 sec would be on the way up and 3.5 sec on the way down

Sx = 27 * cos 47 * 3.5 = 64.4 m around 200 ft seems reasonable

Answer:D

Explanation:

R =  

V

I

=  

120 volt

0.8 ampere

=  150 ohm (Ω)

P =  V × I

=  120 volt × 0.8 ampere

=  96 watt (W)

An electric light installation  can draw Power of 96 Watt  at 120 V if it creates a current of 0.8 amps

Electric power  is the rate of electric energy transfer by an electric circuit per unit time . It is denoted by P and measured using the SI unit of power that is Watt (W)

since, Electric Power   = voltage * current

Power    = 120 V * 0.8 A

Power    = 96 Watts

An electric light installation  can draw Power of 96 Watt  at 120 V if it creates a current of 0.8 amps

learn more about Electric power  

https://brainly.com/question/16925887?referrer=searchResults

#SPJ3

Answer:

Gravity can pull soil, mud, and rocks down cliffs and hillsides.

Explanation:

Gravity is responsible for erosion by flowing water and glaciers. But gravity also causes erosion directly. This type of erosion and deposition is called mass wasting.

Answer:

Explanation:

Answer:

b rugby and basketball

Explanation:

basket ball was made by a white man

American Football originated from Soccer and Rugby. Hence, option (A) is correct.

American football, sometimes known as gridiron, is a team sport played by two teams of eleven players on a rectangular field with goalposts at each end. It is known simply as football in the United States and Canada. The defense, the team without the ball, seeks to halt the offense's movement and seize control of the ball for themselves.

The offence, the team in possession of the oval-shaped football, attempts to advance down the field by running with the ball or throwing it. The offence is awarded a new set of four downs to resume the drive if they successfully gain at least 10 yards in four downs or plays. If they fail, they forfeit the ball to the defense.

Learn more about Football here:

https://brainly.com/question/15504525

#SPJ2

Answer:

from someone watching the bulldozer from the cab of the truck or from elsewhere on the flatbed.

Explanation:

Answer:

False, I am pretty sure.

Explanation:

Transverse waves are always characterized by particle motion being perpendicular to wave motion. ... As a sound wave moves from the lips of a speaker to the ear of a listener, particles of air vibrate back and forth in the same direction and the opposite direction of energy transport.

Answer:

1.108 ×  [tex]10^{-3}[/tex]J

Explanation:

v=21.0v

Q=52.8×  [tex]10^{-6}[/tex]

E=?

V=E/Q

E=v ×Q

 =21 ×52.8 ×[tex]10^{-6}[/tex]

 =1108.8   ×[tex]10^{-6}[/tex]

E= 1.108 ×  [tex]10^{-3}[/tex]J

Answer: they have one path to flow

Explanation: share the same current

Answer:

19.3m/s

Explanation:

Use third equation of motion

[tex]v^2-u^2=2gh[/tex]

where v is the velocity at halfway, u is the initial velocity, g is gravity (9.81m/s^2) and h is the height at which you'd want to find the velocity

insert values to get answer

[tex]v^2-0^2=2(9.81m/s^2)(38/2)\\v^2=9.81m/s^2 *38\\v^2=372.78\\v=\sqrt[]{372.78} \\v=19.3m/s[/tex]

Answer:

Explanation:

Q1) d) A is not correct; R is correct (sort of) but is not the reason for A.

A vector may be resolved into an infinite number of components.

Breaking a projectile motion into the vertical and horizontal components is the EASIEST way to solve it because acceleration can be assumed to be constant in both directions. Zero for horizontal and g(ravity) in the vertical. However it is not the ONLY way to do it. Other ways are much more complex.

Q2) a) Both A and R are correct; R is the correct explanation of A  (sort of)

A is correct. Speed is constant in uniform circular motion.

R is correct if you call CENTRIPETAL acceleration constant. It is only constant in magnitude. The direction is always changing as the vector always points toward the center of rotation.

Answer:

A roller coasters accelerates from an initial velocity of of 6.0 m/s to a final velocity of 70 m/s over 4 seconds. What's the acceleration? Q. Acceleration only takes place when things speed up. Q. A drag racer accelerated from 0 m/s to 200 m/s in 5 s.

Explanation:

Answer:

F = 0 N

Explanation:

The problem does not talk about any acceleration. We can just assume it always moves at a constant speed so the resultant force will be 0 newtons. Of course you could say that it accelerates for a certain amount of time, as the wind blows, but the problem doesn't tell us when to calculate the resultant force (if during the acceleration or after) + we don't have the mass of the jet.

Compression force can be measured with a force gage or load cell. 

The change in the length of the spring as it stretches from 4.0 cm to 6.0 cm is 2.0 cm.

The change in length of the spring can be calculated by subtracting the initial unstretched length (4.0 cm) from the final stretched length (6.0 cm).

Change in length = Final length - Initial length

Change in length = 6.0 cm - 4.0 cm

Change in length = 2.0 cm

Therefore, the change in the length of the spring as it stretches from 4.0 cm to 6.0 cm is 2.0 cm. This means the spring elongates by 2.0 cm under the applied load between points A and B.

To learn more about length of the spring, here

https://brainly.com/question/34758395

#SPJ2

The complete question is:

The average value of the load between A and B is 6.0 N. The spring has an unstretched length increases from 4.0 cm to 6.0 cm. What is the change in the length of the spring as it stretches from 4.0 cm to 6.0 cm?

Answer:

Explanation:

The net work will change the kinetic energy

W = ½mv² = ½m(at)² = ½ma²t²

W = ½(7.7)2.6²(18.5²) = 8907.3985 = 89 kJ

Answer:

Explanation:

s = ½at²

s = ½(9.50)(29.3²) = 4,077.8275

s = 4080 m

when rounded to the three significant digits of the question numerals.

Hi there!

a.

We can use the initial conditions to solve for w₀.

It is given that:

[tex]\frac{d\theta}{dt} = w_0e^{-\sigma t}[/tex]

We are given that at t = 0, ω =  3.7 rad/sec. We can plug this into the equation:

[tex]\omega(0)= \omega_0e^{-\sigma (0)}\\\\3.7 = \omega_0 (1)\\\\\omega_0 = \boxed{3.7 rad/sec}[/tex]

Now, we can solve for sigma using the other given condition:

[tex]2 = 3.7e^{-\sigma (8.6)}\\\\.541 = e^{-\sigma (8.6)}\\\\ln(.541) = -\sigma (8.6)\\\\\sigma = \frac{ln(.541)}{-8.6} = \boxed{0.0714s^{-1}}[/tex]

b.

The angular acceleration is the DERIVATIVE of the angular velocity function, so:

[tex]\alpha(t) = \frac{d\omega}{dt} = -\sigma\omega_0e^{-\sigma t}\\\\\alpha(t) = -(0.0714)(3.7)e^{-(0.0714) (3)}\\\\\alpha(t) = \boxed{-0.213 rad\sec^2}[/tex]

c.

The angular displacement is the INTEGRAL of the angular velocity function.

[tex]\theta (t) = \int\limits^{t_2}_{t_1} {\omega(t)} \, dt\\\\\theta(t) = \int\limits^{2.5}_{0} {\omega_0e^{-\sigma t}dt\\\\[/tex]

[tex]\theta(t) = -\frac{\omega_0}{\sigma}e^{-\sigma t}\left \| {{t_2=2.5} \atop {t_1=0}} \right.[/tex]

[tex]\theta = -\frac{3.7}{0.0714}e^{-0.0714 t}\left \| {{t_2=2.5} \atop {t_1=0}} \right. \\\\\theta= -\frac{3.7}{0.0714}e^{-0.0714 (2.5)} + \frac{3.7}{0.0714}e^{-0.0714 (0)}[/tex]

[tex]\theta = 8.471 rad[/tex]

Convert this to rev:

[tex]8.471 rad * \frac{1 rev}{2\pi rad} = \boxed{1.348 rev}[/tex]

d.

We can begin by solving for the time necessary for the angular speed to reach 0 rad/sec.

[tex]0 = 3.7e^{-0.0714t}\\\\t = \infty[/tex]

Evaluate the improper integral:

[tex]\theta = \int\limits^{\infty}_{0} {\omega_0e^{-\sigma t}dt\\\\[/tex]

[tex]\lim_{a \to \infty} \theta = -\frac{\omega_0}{\sigma}e^{-\sigma t}\left \| {{t_2=a} \atop {t_1=0}} \right.[/tex]

[tex]\lim_{a \to \infty} \theta = -\frac{3.7}{0.0714}e^{-0.0714a} + \frac{3.7}{0.0714}e^{-0.0714(0)}\\\\ \lim_{a \to \infty} \theta = \frac{3.7}{0.0714}(1) = 51.82 rad[/tex]

Convert to rev:

[tex]51.82 rad * \frac{1rev}{2\pi rad} = \boxed{8.25 rev}[/tex]

Four regions of the electromagnetic spectrum that astronomers use when observing objects in the space are the following enumerated answers.

1. First is Ultraviolet

2. Next is Infrared

3. Then the radio

4. Lastly the Visible lights.

These are the answers to the problem.

Answer:

17.5 N

Explanation:

→ F = (2.5 × 7.0) N

→ F = 25/10 × 7 N

→ F = 5/2 × 7 N

→ F = (5 × 7)/2 N

→ F = 35/2 N

→ F = 17.5 N towards left

Hence, 17.5 N of net force must act on the book to make it accelerate to the left.

An LED is useful because when a current passes through it, it gives out light.

An LED is useful because when a current passes through it, it gives out Light.

LED, in full light-emitting diode, in electronics, a semiconductor device that emits infrared or visible light when charged with an electric current.

A light-emitting diode (LED) emits light by applying a forward current to the pn junction of a compound semiconductor.

When forward current is passed through the light-emitting diode, carriers (electrons and holes) move. The holes in the p-type region move to the n-type region and the electrons in the n-type region move to the p-type region. The injected carriers recombine, and the energy difference before and after recombination is released as light. The emitted light depends on the energy band gap (Eg) of the compound semiconductor.

Learn more about light-emitting diode

https://brainly.com/question/12286583?referrer=searchResults

#SPJ2

Answer:

its keeps the fur straight.....im kinda confused with the question

Explanation: