the ph of a 7.50 x 10-2 m, 0.250 l aqueous solution of a weak monoprotic base is 10.5 . what is the value of the pkb of the base?

Answer: c

Explanation:

To complete the entire proton-proton reaction, six protons are needed. There are two single protons remain at the end of the reaction chain.

The proton-proton reaction (also known as the proton-proton chain or the p-p chain) is a series of nuclear fusion reactions that occur in the core of stars, including the Sun, and involve the fusion of hydrogen nuclei (protons) to form helium. The proton-proton reaction is the primary source of energy production in the Sun and other low-mass stars. The proton-proton reaction involves a series of reactions that involve the fusion of two protons to form deuterium (a hydrogen isotope), the fusion of deuterium with a proton to form helium-3, and the fusion of two helium-3 nuclei to form helium-4. These reactions can be represented by the following equations:

p + p -> 2H + e^+ + v_e

2H + p -> 3He + v_e

3He + 3He -> 4He + 2p

To complete the entire proton-proton reaction, six protons are needed. At the end of the reaction chain, four protons are combined to form a helium-4 nucleus, and two protons are produced as a byproduct. Therefore, at the end of the reaction chain, there are two single protons remaining. It is important to note that the proton-proton reaction is a complex process that involves many different reactions and particles. The equations provided here are simplified representations of the proton-proton reaction and do not include all of the intermediate steps and particles involved.

To know more about protons please refer: https://brainly.com/question/1252435

#SPJ4

When the electrons in an atom transition between energy levels, according to Bohr, an atomic spectrum is produced. When energy is absorbed, the electrons would leap to a greater energy level than they normally would, creating an excited and unstable condition. Electrons ordinarily have the lowest energy attainable.

The characteristic wavelengths of electromagnetic radiation (or a subset of it) that are released or absorbed by a material, atom, or molecule are known as a spectrum.

The term "spectrum" alludes to how various people experience autism in a variety of ways; autism is a condition that is highly diverse. Autism is seen as a spectrum disorder because each autistic person experiences it differently. Some autistic people may require more care than others in order to live the lifestyles they desire.

The sun's spectrum of colors, the rainbow, and a molecule's infrared absorption wavelengths are a few examples of spectra.

Continuous, emission, and absorption spectra are the many types.

To learn more about spectrum. Please visit the below link.

https://brainly.com/question/6836691

#SPJ4

In the asthenosphere, density and temperature are the primary contributors to convection currents.

What exactly is the Earth's asthenosphere?

The weaker, denser layer below the lithospheric mantle is known as the asthenosphere. It is between 62 miles and 410 kilometers (100 miles) below the surface of the Earth. Because of the asthenosphere's extreme heat and pressure, rocks begin to weaken and partially melt, turning semi-molten.

What is the short definition of the asthenosphere?

Located under the lithosphere, the asthenosphere is a region of the Earth's mantle that is thought to be significantly hotter and more fluid than the lithosphere. Between 100 km (60 miles) and 700 km (450 miles) below the surface of the Earth is the asthenosphere.

To know more about asthenosphere visit:

https://brainly.com/question/7152935

#SPJ1

3 moles of carbon dioxide are generated when one mole of the compound is treated with warm, concentrated KMnO₄.

The balanced chemical equation for the above reaction is given as:

3K₂MnO₄ + 2 CO₂ ⇄ 2 KMnO₄ + MnO₂ + 2 K₂CO₃

It is clear that from 2 moles of carbon dioxide produces 2 moles of potassium permanganate.

The amount of CO₂ formed for 1 mole of KMnO₄ with 100% yield would be

2/2 × 1 mole = 1 mole.

Hence, the number of moles of carbon dioxide that are generated when one mole of the compound is treated with warm, concentrated KMnO₄ id 3 moles.

Learn more about number of moles from the link given below.

https://brainly.com/question/7942810

#SPJ4

Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, 3.51g of nitric acid will remain in 3 liters of solution with a density of 1.171 g/ l.

Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.

Mathematically,

Density of solution = mass of solution ÷volume marked on the graduated cylinder

Substituting all the values in above formula, we get

1.171 g/ l = mass of solution/ 3 liters

mass of solution= 1.171× 3

mass of solution =3.51g

Therefore, 3.51g of nitric acid will remain in 3 liters of solution with a density of 1.171 g/ l.

To know more about density, here:

https://brainly.com/question/16894337

#SPJ1

MgO > CaO > NaF > KCl are the following compounds with decreasing order of lattice energy.

With the help of the people success platform Lattice, leaders can create motivated, cohesive team that foster winning cultures. Launching 360-degree performance review cycles, engagement polls, tracking OKR/goals, getting real-time feedback, and promoting manager 1-on-1 meetings are all made simple with Lattice.

Any orderly configuration of points and objects over a region or in space, such as the geometric configuration of the atoms within a crystal. Fissionable material is arranged geometrically in a nuclear reactor and is also referred to as a "space lattice."

To know more about lattice visit:

brainly.com/question/29774529

#SPJ4

The bicarbonate ions neutralise the hydronium ions when an acidic material enters the circulation, creating carbonic acid and water. Already, blood's buffering mechanism includes carbonic acid.

Bicarbonate (HCO3-) functions as a buffer against pH fluctuations because it can reversibly bind a free hydrogen ion (Review Buffer Basics). The bicarbonate buffer has a high buffering capacity around the typical ECF pH of 7.4, with a pK of 6.1.

The bicarbonate/carbonic acid buffering mechanism works to "neutralise" excess acid or base while maintaining a typical range of plasma pH. Bicarbonate binds excess hydrogen ions in metabolic acidosis.

learn more about bicarbonate ions refer

https://brainly.com/question/29315144

#SPJ4

Answer:

Fe + 3NaBr FeBr3 + 3No

Explanation:

In a single replacement reaction, a single element is replaced by another element in a compound. In this case, the iron (Fe) atom is replaced by a bromine (Br) atom, forming the compound iron (III) bromide (FeBr3) and sodium (Na) ions.

The other reactions you provided are not single replacement reactions. For example, in the first reaction, Ca(OH)2 and H2SO4 react to form CaSO4 and H2O, but no element is replaced by another element. In the second reaction, CH4 and O2 react to form CO2 and H2O, but again, no element is replaced. In the third reaction, H2O and CO2 react to form H2CO3, a compound known as carbonic acid. This reaction is not a single replacement reaction because no elements are replaced by other elements.

More material per mole can be found in helium.

The unit of measurement for quantity is the mole. Things react in straightforward mole ratios. However, as balances do not provide readings in moles, you must convert them into grams when comparing the amount of one material to another using moles.

To convert molecular weights to grams, follow these three procedures.

1. Determine the number of moles mentioned in the question.

2. Determine the substance's molar mass.

3. Multiply the two figures.

Avogadro's number of atoms makes up one mole. The amount of a mole can be translated to grams if you know how many there are, and vice versa.

80g/4g/mol helium = 20 Mol

400g/40g/mol of argon = 10 mol

To learn more about helium, refer:-

https://brainly.com/question/1780577

#SPJ4

Based on the given information, it appears that you have a molecule with a molecular formula of C₁₃H₈O and 13C nuclear magnetic resonance (NMR) data. The 13C NMR data provides information about the types and number of carbon atoms present in the molecule, as well as their chemical environments.

To deduce the structure of an unknown compound with the molecular formula C₁₃H₈O, you can use the 13C NMR spectra to identify the types and number of carbon atoms present in the compound.

From the 13C NMR spectra, you can see that there are several peaks at different chemical shifts. The peaks at δ 120.2, 124.1, 128.9, 134.0, 134.5, and 144.3 ppm likely correspond to carbon atoms bonded to hydrogen atoms, while the peak at δ 193.6 ppm likely corresponds to a carbon atom bonded to an oxygen atom.

The presence of a peak at δ 193.6 ppm indicates that there is at least one carbon atom bonded to an oxygen atom in the compound. This suggests that the compound may contain a carbonyl group, which is a functional group consisting of a carbon atom double-bonded to an oxygen atom. Common functional groups containing a carbonyl group include aldehydes, ketones, carboxylic acids, and esters.

Based on the molecular formula and 13C NMR spectra, it is possible that the compound could be an aldehyde, a ketone, a carboxylic acid, or an ester. Additional information, such as the 1H NMR spectra and IR spectra, would be needed to determine the specific structure of the compound with greater certainty.

Learn more about molecular formula from

https://brainly.com/question/15960587

#SPJ1

molecular formula: c13h8o 13c nmr: δ 120.2, 124.1, 128.9, 134.0, 134.5, 144.3, 193.6 ppm, deduce the structure of an unknown compound.

If two atoms of differing electronegativity are bonded covalently to each other, the atom with the greater electronegativity attracts the bonded electrons.

When two atoms with different electronegativity are brought together in a covalent bond, the atom with a greater tendency toward electronegativity will often pull the shared electron pair closer to itself. because the definition of electronegativity is the potential to pull electron density in a covalent binding. So when two atoms of differing electronegativity are bonded covalently to each other, the atom with the greater electronegativity attracts the bonded electrons toward itself which results in a dipole generation in the molecule formed.

You can also learn about electronegativity from the following question:

https://brainly.com/question/17762711

#SPJ4

if 311 g of molecular nitrogen from the atmosphere were converted to ammonia, there be 377.4 g of ammonia formed

We'll start by writing the balanced equation for the reaction of nitrogen and hydrogen produce ammonia. This is given below:

N₂ + 3H₂ —> 2NH₃

Then, we should calculate the moles of N₂ t reacted from the balanced equation. This is illustrated below:

moles N₂ = mass N₂ / mass molar

moles N₂ = 311 g/ 28 g/ mol = 11.10 moles

we know 1 moles N₂ produce 2 moles NH₃

so we can find the moles of NH₃ using the unitary method

(2/1) x moles N₂ = moles NH₃

(2/1) x 11.10 moles =22.20 moles NH₃

we already found the moles NH₃ so we can find the mass of NH₃

mass NH₃ = moles x mass molar

mass NH₃ = 22.20 moles x 17 g/ moles

mass NH₃ = 377.4 g.

To find more about Reaction, refer the link below:

brainly.com/question/17434463

#SPJ4

The specific heat capacity of water is 1.00 cal/g.°C, 2940 J much heat is required to raise the temperature of 25.0 g water from 22°C to 50.0°C

The specific heat capacity is measured in J/(kg K) or J/(kg °C), and it is the amount of heat (J) absorbed per unit mass (kg) of the material when its temperature rises by 1 K (or 1 °C).

The amount of heat required to increase the temperature of 1 gram of a material by 1 degree Celsius (°C) is known as specific heat. Since water has a higher specific heat than other substances, it requires more energy to raise its temperature.

Given that,

T₁ = 22°C

T₂ = 50.0°C

here

Specific heat capacity of water (Cp) = 1.00 cal/g.°C = 4.2 J/g.°C

Heat required to convert liquid from 22°C to 50.0°C.

Q₁ = m × Cp × (T₂-T₁)

or, Q = 25 g × (4.2 J/g.°C) × (50-22) °C

or, Q = 2940 J

To know more about specific heat capacity refer to:

https://brainly.com/question/26846829

#SPJ1

The chemical symbols that will complete the equation for this single displacement reaction are 2NaCl + Br₂.

The balanced equation for the above-mentioned reaction is as follows;

    2NaBr + Cl₂   →   2NaCl  + Br₂

When an element reacts with a compound and replaces another element in that molecule, the reaction is known as a single displacement reaction. In most cases, the element with a higher degree of reactivity will drive out the elements with a lower degree of reactivity from its complex. As a result of the higher reactivity of chlorine (Cl₂) compared to bromine (Br₂), bromine gets displaced from its compound by chlorine.

You can also learn about single displacement reaction from the following question:

https://brainly.com/question/29307794

#SPJ4

Organic chemistry is the study of the structure, properties, and reactions of compounds that contain carbon. These compounds are found in living organisms and also can be synthesized artificially. Organic compounds are characterized by the presence of carbon-hydrogen bonds and are often based on hydrocarbons, which are molecules made up of only hydrogen and carbon atoms.

Inorganic chemistry is the study of the structure, properties, and reactions of compounds that do not contain carbon-hydrogen bonds. These compounds are typically not found in living organisms and are not based on hydrocarbons. Inorganic compounds can include elements such as metals, nonmetals, and metalloids.

There are many classes of organic compounds, including:

Hydrocarbons: These are compounds that are made up of only hydrogen and carbon atoms. They can be saturated (single bonds only) or unsaturated (double or triple bonds). Examples include alkanes, alkenes, and alkynes.

Alcohols: These are compounds that contain a hydroxyl group (-OH) attached to a carbon atom. Examples include ethanol and methanol.

Ethers: These are compounds that contain an oxygen atom bonded to two carbon atoms. Examples include dimethyl ether and ethyl methyl ether.

Aldehydes: These are compounds that contain a carbonyl group (-CO) at the end of a carbon chain. The carbonyl group can also be found within a chain of carbon atoms. Examples include formaldehyde and acetaldehyde.

Ketones: These are compounds that contain a carbonyl group (-CO) within a carbon chain. Examples include acetone and 2-butanone.

Carboxylic acids: These are compounds that contain a carboxyl group (-COOH) attached to a carbon chain. Examples include acetic acid and propionic acid.

Esters: These are compounds that contain a carbonyl group (-CO) bonded to an oxygen atom and a hydroxy group (-OH). They are formed by the reaction of a carboxylic acid with an alcohol. Examples include ethyl acetate and butyl acetate.

Amines: These are compounds that contain a nitrogen atom bonded to one or more carbon atoms. They can be primary, secondary, or tertiary, depending on the number of carbon atoms bonded to the nitrogen atom. Examples include methylamine and ethylamine.

Nitriles: These are compounds that contain a carbon atom bonded to a nitrogen atom and a triple bond (-CN). Examples include acetonitrile and propionitrile.

Aromatic compounds: These are compounds that contain a ring of carbon atoms with alternating single and double bonds. They are usually characterized by their pleasant odors and are often found in natural products. Examples include benzene and toluene.

A. 7 x 10^8 mole of H2 requires 8.48 x 10^10 Coulombs of electrical charge, and a voltage of 632.2 V. The minimum electrical energy required to raise the Titanic is 4.02 x 10^13 kW hr, and the minimum cost is $9.2 x 10^7.

1. The amount of H2 gas required to buoy the Titanic is 7 x 10^8 mole.

2. The number of Coulombs of electrical charge required to generate this amount of H2 gas is computed using Faraday's Law:

Q = nF

Where n is the number of moles of H2, F is the Faraday constant (96485 C/mol), and Q is the number of Coulombs.

Therefore, Q = (7 x 10^8) x (96485 C/mol) = 8.48 x 10^10 C.

3. The minimum voltage required to generate H2 and O2 gases is computed using the Nernst Equation:

E = E° - (RT/nF) ln(Q/Q°)

Where E is the voltage, E° is the standard voltage (1.229 V at 300 atm and 25°C), R is the gas constant (8.314 J/molK), T is the temperature (288 K at 2 miles depth), n is the number of moles of H2, F is the Faraday constant (96485 C/mol), Q is the number of Coulombs, and Q° is the standard charge (1 C).

Therefore, E = 1.229 - (8.314 J/molK x 288 K / (7 x 10^8 mol x 96485 C/mol)) ln(8.48 x 10^10 C / 1 C) = 632.2 V.

4. The minimum electrical energy required to raise the Titanic is calculated using the equation:

E = QV

Where E is the electrical energy, Q is the number of Coulombs, and V is the voltage.

Therefore, E = (8.48 x 10^10 C) x (632.2 V) = 4.02 x 10^13 kW hr.

5. The minimum cost of the electrical energy required to generate the necessary H2 gas is calculated using the equation:

Cost = (E x Price) / (1000 x 3600)

Where E is the electrical energy, Price is the cost per kW hr, and 1000 and 3600 are conversion factors.

Therefore, Cost = (4.02 x 10^13 kW hr x $0.23/kW hr) / (1000 kW hr/kW hr x 3600 s/hr) = $9.2 x 10^7.

For more questions like Electrical charge click the link below:

https://brainly.com/question/12502147

#SPJ4

Complete question:

Some years ago a unique proposal was made to raise the Titanic. The plan involved placing pontoons within the ship using a surface‐controlled submarine‐type vessel. The pontoons would contain electrodes (cathodes) and would be filled with H2 gas as a result of the electrolysis of water. It has been estimated that it would require about 7 x 10^8 mole of H2 gas to provide the buoyancy to lift the ship

a) How many Coulombs of electrical charge would be required?

b) What is the minimum voltage required to generate H2 and O2 if the pressure on the gases at the depth of the wreckage (2 miles) is 300 atm?

c) What is the minimum electrical energy (in kW hr) required to raise the Titanic by electrolysis?

d) What is the minimum cost of the electrical energy required to generate the necessary H2 gas if the electricity costs $0.23 per kilowatt‐hour (kW hr) to generate at the site?

Strontium powder would ignite in a dark red flame, and potassium powder would result in a lavender-pink flame.

What is Potassium Powder?

Potassium is a mineral that may be found in a variety of foods and is essential for numerous bodily processes, most notably the heartbeat.

Low potassium levels in the blood can be prevented or treated with potassium chloride (hypokalemia).

Potassium levels can become low due to sickness, medication side effects, or after a protracted illness accompanied by diarrhoea or vomiting.

Low blood potassium levels can be treated and prevented by taking potassium chloride, sometimes referred to as potassium salt. Vomiting, diarrhoea, or certain drugs can all lead to low blood potassium levels. Before using, dilute the concentrated form. It can be administered orally or slowly injected into a vein.

Learn more about Potassium Powder from given link

https://brainly.com/question/25380525

#SPJ1

The order from most soluble to least soluble is CH3CH2CH2OH > CH3CH2OCH3 > CH3CH2CH3.

The solubility of a compound depends on the nature of the solute and the solvent. If the nature of both is the same (either both polar or both nonpolar) the salute will be soluble in that solvent.

The solubility of an organic compound in water depends on the following factor:

Hydrogen bonding: If the solute is capable to form hydrogen bonding with water, it will be soluble in the water.

Polarity: As the polarity of the solvent increases the water solubility also increases.

The most soluble compound in water is alcohol. The alcohol is the highest polar molecule from the given molecules. It also forms hydrogen bonding with the water as follows:

The second most soluble compound in water is ether, CH3CH2OCH3. Ether is less polar than alcohol and forms fewer hydrogen bonds with water.

The least soluble compound in water is propane, CH3CH2CH3. Propane is a nonpolar compound and it is insoluble in a polar solvent, water.

Therefore the order is as follows:

CH3CH2CH2OH>CH3CH2OCH3>CH3CH2CH3

To learn more about hydrogen bonding visit

https://brainly.com/question/16854739

#SPJ4

There are a total of 24 atoms in 3 Na₃PO₄. 9 sodiums, 3 phosphorous and 12 oxygens are there.

Sodium phosphate is an ionic compound formed by the loss of electron from sodium atom to the phosphate group. There are 3 sodium atoms in one sodium phosphate Na₃PO₄. One electrons from each sodium atom donates to the phosphate group.

The number of atoms in a compound are written as the subscripts for each chemical symbol. In Na₃PO₄, there are 3 sodium atoms, one phosphorous and 4 oxygen atoms. Thus, there are total 8 atoms.

In 3 Na₃PO₄, thus, contains 8 × 3 = 24 atom. Hence, the total number of atoms in 3Na₃PO₄ is 24.

To find more on Na₃PO₄, refer here:

https://brainly.com/question/15218755

#SPJ1

At the equivalence point, the molarities of the two solutions are equal, so the volume of the NaOH required to neutralize the HCl is also 40.0 mL, for the titration.

The concentration of HCl multiplied by the volume of HCl must be equal to the concentration of NaOH multiplied by the volume of NaOH. The concentration of the HCl is 0.120 moles/L and the volume of the sample is 40.0 mL. This means that the concentration of NaOH multiplied by the volume of NaOH must equal 0.120 x 40.0 = 4.8 moles. The concentration of NaOH is also 0.120 moles/L, so the volume of NaOH must be 4.8/0.120 = 40.0 mL. This means that 40.0 mL of 0.120 m NaOH is needed at the equivalence point of the titration to neutralize a 40.0 mL sample of 0.120 m HCl.  To determine the volume of 0.120 m NaOH needed at the equivalence point of a titration, the moles of HCl and NaOH must be equal. This means that the concentration of HCl multiplied by the volume of HCl must be equal to the concentration of NaOH multiplied

To know more about   titration refer to the  link   brainly.com/question/2728613

#SPJ4

According to the chemical equation, baking soda is required for evolution of carbon dioxide hence baking soda ran out first.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

The aromatic ring is the nucleophile in electrophilic aromatic substitution, while the added group is the electrophile in this scenario.

An electrophile is what?

Lacking electrons, electrophiles are drawn to an area with an abundance of them. Because they contain an atom with a positive charge or an atom lacking an octet of electrons, electrophiles are typically positively charged. In order to form a bond with a nucleophile, requiring the interactions of a proton and a base, electrophiles react by accepting an electron pair. Electrophilic substances are Lewis acids (compounds that accept electron pairs), and many of them are Bronsted acids.

learn more about electrophile  here:

https://brainly.com/question/21773561

#SPJ4

The right-hand side of the atomic numbers contains nonmetals, which have relatively high electronegativity values and a propensity to gain electrons.

Atoms in molecules are held together by chemical bonds. Electrostatic forces between negative-charged electrons and ionized atomic nuclei produce bonds (the positions of which in space are determined by quantum mechanics).

A chemical bond is the term used to describe the attraction amongst atomic nuclei. To form bonds, atoms exchange or swap their valence electrons. The valence electrons, which make up an atom's lowest energy level, have the capacity to interact chemically. The most straightforward explanation is that atoms are trying to enter the safest (lowest-energy) state they can.

To know more about Chemical bond visit:

https://brainly.com/question/15444131

#SPJ4

0.123 mol of methane contains 7.4 x 1022 molecules of methane (ch4). Four hydrogen atoms are joined to the one carbon atom that makes up the molecule methane by single bonds.

It is a gas that is combustible, colourless, odourless, non-toxic, and has a melting point of -161°C. It serves as a fossil fuel, greenhouse gas, and bacterial metabolite, among other things. Avogadro's number refers to the fact that a mole of methane really consists of 6.0221023 molecules. To calculate the required number of molecules, find the substance's molecular weight for one mole. Next, multiply the result by the Avogadro constant after dividing the molar mass value by the molecular mass.

To learn more about molecule, click here.

https://brainly.com/question/19556990

#SPJ4

The molar solubility of Fe(OH)2 at 25 C if K sp of the compound is 7.9 x 10^16 is 5.8 x 10^6 M.

The equilibrium solubility of Fe(OH)2 is as follows:

Fe(OH)2(s) <--------> Fe2+(aq)   +   2OH-(aq)

The equilibrium constant expression for this equilibrium, i.e. Ksp, is as follows.

  Ksp = [Fe2+] [OH-]2

where,

                 [Fe2+] = molar concentration of Fe2+

                  [OH-] = molar concentration of OH-

sp stands for solubility product

The value of Ksp = 7.9×10-16

Now,

Let S represent the molar solubility of Fe(OH)2.

Fe(OH)2 having one Fe2+ and two OH-

So,

                 [Fe2+] = 1S

                 [OH-] = 2S

substitute 1S and 2S in Ksp expression

             Ksp = 1S × (2S)^2

             Ksp = 4S^3

So,

               4S^3 = 7.9 ×10^-16 M3

                 S^3 = 1.975 × 10^-16 M3

                     S = 5.8×10^-6 M

Therefore,

The Molar solubility of Fe(OH)2 = 5.8 ×10-6 M

To know more about the Equilibrium constant, here

https://brainly.com/question/10038290

#SPJ4

Soil salinization occurs when the soil becomes too high in salt content, which can be harmful to plants. This can happen due to a variety of factors, including irrigation with salty water, natural salt deposits in the soil, or high levels of salt in the air.

One solution to prevent soil salinization is to use irrigation techniques that minimize the amount of salt that is introduced to the soil. For example, drip irrigation and other low-volume irrigation methods can help to reduce the amount of salt that is applied to the soil. Another solution is to use a soil amendment, such as gypsum, to help remove excess salt from the soil.

One disadvantage of using a soil amendment to remediate soil salinization is that it can be expensive to apply. Additionally, it may not be effective in all cases, depending on the specific cause of the soil salinization and the type of soil.

To know more about Soil Salinization visit :

https://brainly.com/question/27588666?referrer=searchResults

#SPJ4

The biogas produced by anaerobic fragmentation has the most content of methane, CO₂, H₂S, and water.

Biogas can be described as a mixture of gases consisting of methane, carbon dioxide, and hydrogen sulfide, formed from raw materials such as agricultural waste, municipal waste, sewage, plant material, green waste, and food waste. Biogas can be described as a renewable energy source.

Biogas can be produced by anaerobic digestion with anaerobic organisms inside an anaerobic digester, bioreactor, or biodigester. Biogas is methane, carbon dioxide, and may have little amounts of hydrogen sulfide, moisture, and siloxanes.

The gases methane and carbon monoxide can be combusted or oxidized with oxygen. This energy release permits biogas to be used as fuel, for any heating purpose, such as cooking. Biogas can be used in a gas engine to transform the energy in the gas into electricity and heat.

In some cases, biogas consists siloxanes. Hydrogen sulfide is corrosive in the biogas stream.

Learn more about biogas, here:

https://brainly.com/question/19153803

#SPJ1

Answer:

Earned Interest

Explanation:

The typical definition of the melting point is the temperature at which a substance transforms from a solid to a liquid.

The melting point of a liquid is the temperature at which the liquid transforms from a solid to a liquid under atmospheric pressure. This is the location where the liquid and solid phases are equally present. The substance's melting point varies with pressure as well and is reported at standard pressure.

As the melting point is 0 °C.

So, it melts at 2 C. It can melt from 0 °C – 2 °C to 0 °C + 2 °C.

Range = [-2, 2] in °C.

Want to know more about melting points visit the link which is given below;

https://brainly.com/question/29578567

#SPJ4