the moon has a mass of 1×1022 kg, and the gravitational field strength at a distance r from the planet is 0.001 n/kg. what is the gravitational force exerted on the moon while it is in orbit around the planet?
a. 0 N
b. 1 x 10^19 N
c. 1 x 10^22 N
d. 1 x 10^25 N

The resistance of a conductor that carries a current of 120 amperes when the potential difference between its ends is 240 volts = 2 Ω

Electrical resistance is the force that opposes the flow of current, it's a component that can reduce the speed and quantity of the flow of electrons in an electric circuit.

The formula for electrical resistance can be seen to have several components, namely R is the resistance (Ω), V is the voltage (V), and I is the current strength (A).

The equation:

R = V/I

We have,

Current strength = 120 A

The potential difference between its ends  = 240 V

So, the resistance of a conductor that carries a current of 120 amperes when the potential difference between its ends is 240 volts:

R = 240 V / 120 A

= 2 Ω

Learn more about electrical resistance here: https://brainly.com/question/17294367

#SPJ4

The total mass of the protons and neutrons in a potassium-39 nucleus is 6.5307 x 10^-26 kilograms.

The mass of a potassium-39 nucleus can be calculated based on the total mass of its protons and neutrons. Potassium-39 is a stable isotope of potassium with 19 protons and 20 neutrons in its nucleus. The mass of a proton is approximately 1.6726 x 10^-27 kilograms, and the mass of a neutron is approximately 1.6749 x 10^-27 kilograms.

Therefore, the total mass of the protons in a potassium-39 nucleus is 19 x 1.6726 x 10^-27 = 3.18094 x 10^-26 kilograms. The total mass of the neutrons in a potassium-39 nucleus is 20 x 1.6749 x 10^-27 = 3.3498 x 10^-26 kilograms.

The total mass of the protons and neutrons in a potassium-39 nucleus is therefore 3.18094 x 10^-26 + 3.3498 x 10^-26 = 6.5307 x 10^-26 kilograms. This is the expected mass of a potassium-39 nucleus, based on the total mass of its protons and neutrons.

Learn more about Potassium-39 here:

https://brainly.com/question/4991286

#SPJ4

The weight of the car on the 12 degree slope is 546.72 lbs. This weight is important to know for various reasons, such as calculating the amount of force and energy required to move the car up the hill.

The weight of a car on a 12 degree slope can be calculated using the formula:

Weight = Force * sin(Slope Angle)

Therefore, the weight of the car on the 12 degree slope can be calculated as follows:

Weight = 650 lbs * sin(12°)

Weight = 546.72 lbs

The weight of a car on a 12 degree slope is important to know for various reasons. For example, if the car is being driven up the slope, it is important to know the weight of the vehicle to ensure that it will be able to make it up the hill. Additionally, knowing the weight of the car on the slope can help engineers and designers to calculate the amount of force and energy required to move the car up the hill.

Learn more about weight at :https://brainly.com/question/14958701

#SPJ4

The angular acceleration is 0.01533rad/s.

We are given that,

Radius = r = 27.0cm

Speed = v = 11.2 m/s

Time = t = 24.0 s

Therefore , We shall first find the linear acceleration before calculating the angular acceleration from one of the linear motion kinematics equations and the initial velocity u will be 0.

v = u + at

a = v/t

a = (11.2m/s)/(27.0×10⁻²m)

a = 0.414 ×10⁻²m/s²

Now , calculating the angular acceleration,

a = α × r

α = a/r

α =  (0.414 ×10⁻²m/s²)/(27.0×10⁻²m)

α = 0.01533rad/s

To know more about angular acceleration

https://brainly.com/question/13824288

#SPJ4

As you walk away from the charge, the potential becomes less negative and actually grows, coming closer and closer to zero.

If you are infinitely far away from the charge, the potential for both positive and negative charges is zero. The electric potential (also known as the electric field potential, potential drop, or electrostatic potential) is defined as the amount of work energy required to transport a unit of electric charge in an electric field from a reference point to a specified place. The Volt difference dropped across a fixed resistance of one ohm with a current of one ampere running through it is the unit of potential difference formed between two locations.

dV

​V=5x \s2 \s −10x−9

dx dV \s​ \s

=10x−10

so, E=−(10x−10)

The value of E=(1010)

=0V/m for

x=1m

Learn more about electric here-

https://brainly.com/question/8971780

#SPJ4

The intensity of sound in decibels at 10 m is 17.6 dB.

The intensity of sound in decibels at 100 m is 14.08 dB.

The formula to calculate intensity when power is given is I = P/A

where, I is the intensity

P is the power

A is the area

Given, P = 20 W

A₁ = 4πr² = 4π* 10² = 1256.64 m²

A₂ = 4πr² = 4π* 100² =125663.71 m²

I₁ = P / A₁ = 20/1256.64 = 0.0159 W/m²

I₂ = P / A₂ = 20/125663.71 = 0.000159 W/m²

The expression between intensity of sound and decibel level is

dB = 10* log (I/ 1.0* 10⁻¹² W/m²) --------(1)

Substituting the values of I₁ and I₂ in (1),

dB₁ = 10* log (1.5* 10⁻²/ 1.0* 10⁻¹²) =  10* log(1.5* 10¹⁰) = 10* [ log 1.5 + 10] = 10*(0.176* 10) = 17.6 dB

dB₂ = 10* log (1.5* 10⁻⁴/ 1.0* 10⁻¹²) = 10* log(1.5* 10⁸) = 10* [ log 1.5 + 8 ] = 10*(0.176* 8) = 14.08 dB

To know more about sound intensity:

https://brainly.com/question/14125844

#SPJ4

If you replace a 100-watt  light bulb with a 25-watt compact fluorescent bulb, over a 10,000 hr life, you will save electricity bill of  $112,5

A fluorescent bulb is more energy efficient than an incandescent bulb. It produces the same amount of light with less electricity.

The energy used by the bulbs is often expressed in Kwh or kilowatt-hour.

The formula is:

Kilowatt-hours = power (in kilowatt) x time usage (in hours)

In the given problem:

Time usage = 10,000 hours

Light bulb:

Power = 100 watt = 0.1 kw

kwh = 0.1 x 10,000 = 1,000 kwh

electricity bill = 1000 kwh x $0.15/kwh = $150

fluorescent bulb

Power = 25 watt = 0.025 kw

kwh = 0.025 x 10,000 = 250 kwh

electricity bill = 250 kwh x $0.15/kwh = $37,5

Money save =  $150 - $37,5 = $112,5

Learn more about kilowatt-hour here:

https://brainly.com/question/9821162

#SPJ4

The reason the frog doesn't slip is the friction between his feet and the board

Friction is the force that opposes the relative motion between two surfaces that are in contact. In the case of a skateboard, the static friction between the feet and the board helps to keep someone from slipping off when the skateboard is not moving. Once the skateboard begins to move, the static friction changes to kinetic friction and helps to keep it from slipping off as the skateboard moves.

The amount of friction between two surfaces depends on the nature of the surfaces and the force with which they are pressed together. Thus, when the Freddy frog drops vertically and lands on a skateboard, the friction between his feet and the surface of the skateboard helps to keep him from slipping off.

Read more about friction on:

https://brainly.com/question/23161460

#SPJ4

Answer: Fn = 450 N

Explanation:

Part of the tension acts in the upward y-direction, reducing the normal force.

ΣFy = Fn + Ftsin(30)-Fg

0 = Fn + (300 N)sin(30) - (60 kg)(10 m/s^2)

0 = Fn + 150 N - 600 N

0 = Fn - 450 N

Fn = 450 N

As a result, the slope of the LM curve is 0.005.

The ratio of the income sensitivity of real money demand over the interest sensitivity of real money demand determines the slope of the LM curve, which is represented by the coefficient of Y, k over h. With regard to monetary policy, this ratio is crucial.

The money supply function has an impact on the LM curve as well. The supply of money may become more susceptible to interest rates in the current environment of high levels and volatility of interest rates.

The general LM equation is written in terms of Y and r,

Where Money supply = Money demand,

0.5Y – 100r = (M/P) where (M/P) is a constant

100r = 0.5Y - (M/P)

r = 0.005Y - 0.01(M/P)

dr/dY = 0.005 is the slope of the LM function.

For more questions on Slope of LM Curve

https://brainly.com/question/30114657

#SPJ4

The final RPM of ice skater is 116.38.

RPM's meaning?  per revolution

RPM, which stands for revolutions per minute, is a measure of how quickly a machine is operating at any one time. RPM is a measure used in automobiles to indicate how often the crankshaft completes one full rotation each minute as well as how frequently each piston rises and falls in its cylinder.

Briefing:

ω₀ = 6.2π rad/s

α= 10π rad/s

t = 4.2 s

Find: ω

ω = αt + ω₀

ω  = 10 (0.6 s) + 6.2π rad/s

ω =  116.38RPM

To know more about RPM visit:

https://brainly.com/question/13834090

#SPJ4

The maximum distance from mercury to the sun is 0.58 * 10⁸ km.

The minimum distance b/n them is 0.46 * 10⁸ km.

The shape of an elliptical orbit can be described by its eccentricity, which is a measure of how "flattened" the ellipse is. An eccentricity of 0 indicates a circular orbit, while an eccentricity of 1 indicates a parabolic orbit.

In the case of Mercury's orbit, the eccentricity is given as 0.206, which means that the orbit is slightly flattened, but still close to circular. The length of the major axis of the ellipse is given as 1.16 * 10⁸ km.

To find the maximum distance from Mercury to the sun (also known as the aphelion), we need to find the distance from the center of the ellipse to the farthest point on the ellipse (which is at the top of the major axis). This distance is equal to half of the length of the major axis. Thus, the maximum distance from Mercury to the sun is:

1.16 * 10⁸ km / 2 =0.58 * 10⁸ km

To find the minimum distance between Mercury and the sun (also known as the perihelion), we need to find the distance from the center of the ellipse to the closest point on the ellipse (which is at the bottom of the major axis). This distance is equal to half of the length of the major axis times the square root of 1 - (eccentricity)². Thus, the minimum distance between Mercury and the sun is:

[tex](1.16 x 10^8 km / 2) * \sqrt{(1 - (0.206)^2) } = 0.46 * 10^8 km[/tex]

Therefore, Note that the sun is located at one of the foci of the elliptical orbit, rather than at the center. However, since the eccentricity of Mercury's orbit is relatively small (0.206), the distance from the center of the ellipse to either focus is very close to the distance from the center to the top or bottom of the major axis, and the difference can be ignored for most purposes.

Learn more about distance from

https://brainly.com/question/17205917

#SPJ1

They represent a simple explanation of our basic charge interactions, best recognized by the jingle "opposites attract, likes repel."

B and C are also untrue for the same reason; they contradict the fundamental statement of charge interactions. E and H are correct. To become charged, an object must either gain or lose electrons. Losing electrons causes more positive charge than negative charge, resulting in a positively charged item. Gaining electrons causes more negative charge than positive charge, resulting in a negatively charged item. Protons are securely linked in atom nuclei and can never be added or withdrawn by regular electrostatic means. The same argument leads to the rejection of options F and G as possible true.

Learn more about electrostatic here-

https://brainly.com/question/14889552

#SPJ4

A graphical presentation that uses vertical bars to display the magnitude of quantitative data is known as a Column chart.

Column charts make use of vertical bars to compare several objects or categories. On one axis are the comparison categories, while on the other are the data values. They are helpful in illuminating the conditions at a specific time. Anything that can be counted, such the volume of items sold or website hits, can be represented in a column chart.

Using column charts, you may show how various numbers differ from one another. When there are significant differences in the data values, column charts—which are used to compare changes between groups over time—are easiest to understand.

If there are several categories to compare, a line graph could be easier to comprehend.

Column charts can be created using standard, stacked, or percentage forms. It is simpler to compare and identify trends in the data because the same data is presented in each format in a different way. The steps for creating conventional, stacked, and percentages charts are the same regardless of the outcome.

To learn more about column chart visit:

https://brainly.com/question/15507084

#SPJ1

Answer: So the answer is (A) -1.11 m/s^2.

Explanation: To solve this problem, we need to use the formula for average acceleration, which is given by:

a = (vf - vi) / t

Where a is the acceleration, vf is the final velocity, vi is the initial velocity, and t is the time.

Plugging in the values given in the problem, we get:

a = (20 m/s - 120 m/s) / (1.5 minutes * 60 seconds/minute) = -100 m/s / 90 seconds = -1.11 m/s^2

So the answer is (A) -1.11 m/s^2.

In a proton density image the tissue magnetization, RF signal intensity, and image brightness are.

Proton Mail is the world's largest cozy e-mail provider. It gives end-to-cease encryption and plenty of different splendid safety capabilities to maintain your communications non-public. Even the company hosting your emails has no manner of reading them, so you can rest confident that they cannot be studied via third events either.

It has a completely, very wealthy internal shape. you could have heard that protons are made up of 3 smaller basic particles known as quarks, two united states, and one down quark to be particular, but it is only the top of the particle iceberg, as proton researcher Paul Reimer explains.

One or extra protons are present in the nucleus of every atom. They provide the attractive electrostatic crucial force which binds the atomic electrons. The quantity of protons in the nucleus is the defining belongings of an element and is referred to as the atomic quantity.

Learn more about proton here:-https://brainly.com/question/1805828

#SPJ4

The frictional force acting on the 13 kg mass is 40.65 N.

The acceleration of the block is calculated by applying the following kinematic equation as shown below.

s = ut + ¹/₂at²

where;

s = 0 + ¹/₂at²

¹/₂at² = s

at² = 2s

a = 2s / t²

a = (2 x 3.4) / (5.5²)

a = 0.225 m/s²

The frictional force acting on the 13 kg mass is calculated as follows;

W sinθ - F = ma

where;

(13 x 9.8 x sin20) - F = 13 x 0.225

43.57 - F = 2.925

F = 43.57 - 2.925

F = 40.65 N

Learn more about frictional force here: https://brainly.com/question/4618599

#SPJ1

The bug's maximal kinetic energy changes as 16 times of Kinetic energy before amplitude increases when the amplitude approaches 0.20 mm.

The amplitude of a wave is its largest displacement. The wave's greatest velocity is now expressed as its amplitude, which is: v =Aw= K/M.

Now, the square of the wave is directly proportional to the kinetic energy of a system. As a result, the wave's maximum kinetic energy is given by KE = k/2A^2, which means that

KE1/KE2 = A1^2/A2^2 where KE1 is the kinetic energy prior to the amplitude (A1) increasing and KE2 is the kinetic energy following the amplitude increasing (A2)

Due to that,

The bug's entire vertical journey was S = 0.10m

The wave's amplitude is equal to half of the whole distance from the top to the bottom, hence its value is (A) = S/2 = 0.1/2 = 0.05m.

Now that the wave's amplitude has increased to 0.20 m, KEA = KE1/KE2 = A1^2/A2^2

KE1/KE2 = (0.05)^2/(0.20)^2, which equals 0.0025/0.04 = 0.0625.

KE2 then equals 16KE1

Therefore, the largest change in kinetic energy is (KE2) = 16KE1.

​To learn more about kinetic energy click here https://brainly.com/question/26472013

#SPJ4

Find complete question:  A bug on the surface of a pond is observed to move up and down a total vertical distance of 0.10 m, lowest to the highest point, as a wave passes. What is the amplitude of the wave? If the amplitude increases to 0.20 m, by what factor does the bug's maximum kinetic energy change?

The Fraunhofer process is typically simpler to study even though they are physically the same processes and have distinct features. Fresnel diffraction, players who are near to one another, and non-parallel light rays

Participants in the Fraunhofer diffraction are far apart, and the light beams are parallel.

When plane waves are incident on a diffracting object and the diffraction pattern is observed far enough away from the object (a distance satisfying Fraunhofer condition) (in the far-field region), as well as when it is observed at the focal plane of an imaging lens, the Fraunhofer diffraction equation is used to model the diffraction of waves in optics. The Fresnel diffraction equation, on the other hand, predicts the diffraction pattern that is produced close to the diffracting object (in the near field area).

Although Joseph von Fraunhofer was not directly engaged in the formulation of the theory, the equation bears his name.

Learn more about Diffraction here:

https://brainly.com/question/12290582

#SPJ4

The fragments reaction is 7.59 MeV/nucleon and  8.39 MeV/nucleon

What is nucleus ?

Neutrons and protons, which have opposite electric charges, make up atomic nuclei. The strongest basic force now understood, known as the strong force, is what holds these things together. A normal atom's nucleus generally holds more than 99.9% of the atom's mass yet takes up considerably less than.01 percent of its volume.

What is fission ?

When a neutron collides with a bigger atom, it excites it and causes it to split into two smaller atoms, which are known as fission products. This process is known as fission. A chain reaction might start as a result of additional neutrons that are also emitted. Huge amounts of energy are produced during the splitting of each atom.

1) m_proton + m_netron + m_electron - m_U

= 92*1.007276466812 + 92*5.4857990943e-4 + 143*1.008664916 - (235.0439299)

= 1.9151 u

= 931.494061 * 1.9151 MeV

= 1784 MeV

= 1784/235 = 7.59 MeV/nucleon

2) m_proton + m_netron + m_electron - m_Cs

= 55*1.007276466812 + 55*5.4857990943e-4 + 82*1.008664916 - (136.9070895)

= 1.2338 u

= 931.494061 * 1.2338 MeV

= 1149 MeV

= 1145/137 = 8.39 MeV/nucleon

Therefore, the fragments reaction is 7.59 MeV/nucleon and  8.39 MeV/nucleon.

Learn more about nucleus from the given link.

https://brainly.com/question/141626

#SPJ4

From Paris to Qatar for the world cup, two French riders traveled by bicycle. In three months, 7,000 kilometers overall.

The Fédération Internationale de Football Association (FIFA), the world's governing organization of association football, and its senior men's national teams compete in the FIFA World Cup, commonly referred to as the World Cup. With the exception of 1942 and 1946, when it was postponed due to World War II, the tournament has been conducted every four years since its inception in 1930. The current winners are France, who captured their second championship during the 2018 competition in Russia.

The structure uses a qualification round to choose the teams that advance to the tournament phase, which occurs over the previous three years. 32 teams fight for the title at sites in the host country or nations during the tournament round.

Learn more about world cup here:

https://brainly.com/question/29487961

#SPJ4

0.00025 N is the magnitude of the net force on the first wire in (figure 1).

The total of all forces exerted on an item is known as the net force. A mass can accelerate due to net force. A body is subject to another force whether it is at rest or in motion. When there are a lot of forces acting on a system, the phrase "net force" is employed.

From the diagram, first wire has an attracting force from third wire at 0.04 m distance and a repelling force from second wire at 0.02 m distance.

Expression of the force is -

F = [µ ×π×(I)² × L] / (2πd)

When d = 0.02 m,

or, F = [4 ×π× 10⁻⁷(10)² × 0.50] / (2π × 0.02)

or, F = 0.0005 N

And when d = 0.04 m,

or, F = [4 ×π× 10⁻⁷(10)² × 0.50] / (2π × 0.04)

or, F =  0.00025 N

So, the net force on first wire  = 0.005 - 0.00025

= 0.00025 N repelling or upward.

To know more about net force refer to:

https://brainly.com/question/12970081

#SPJ1

The complete question is as follows:

What is the magnitude of the net force on the first wire in (Figure 1)?

Express your answer in newtons.

Mechanical weathering mechanisms include pressure release, thermal expansion, frost and root wedging. Weathering that occurs mechanically is sometimes called physical weathering.

This is typically referred to as thermal expansion. The fractional change in volume or length per unit change in temperature can be referred to as thermal expansion. Typically, the linear expansion coefficient is used when dealing with a solid expansion. The force perpendicular to an object's surface that is delivered per unit area over that force is known as pressure (symbol: p or P). The gauge pressure, also known as gauge pressure, is the pressure in relation to the surrounding air pressure. To express pressure, a variety of units are employed.

Learn more about thermal expansion here

https://brainly.com/question/14092908

#SPJ4

The complete question is -

Thermal expansion, pressure release, and mineral, frost, and root wedging all are ________ weathering processes.

If we assume at time instance t= 0, then the same thing happens. initial velocity is equal to final velocity

During a free fall, only the gravitational force acts on a body. The initial velocity of the body is zero during free fall.

Vertical motion is symmetrical - the distance and time are the same in the rise as in the fall; the final velocity will have the same magnitude as the initial velocity but in the opposite direction. Horizontal components will never be effected by gravity; it is constant velocity motion

The average velocity is the ratio of the total distance traveled to the total time taken. This can happen in two cases, first if the initial velocity and the final velocity are equal to the average velocity and there is no change in the velocity for the entire trip

Velocity is the measure of the amount of distance an object covers in a given amount of time. Here's a word equation that expresses the relationship between distance, velocity and time: Velocity equals distance travelled divided by the time it takes to get there.

To learn more about initial velocity visit:

https://brainly.com/question/9163788

#SPJ4

The center of gravity of the man doing the classic yoga poses will be as shown in first figure.

The Center of Gravity is the theoretical point in the body where the body's total weight is expected to exert force. It is important to know the center of gravity because it predicts the behavior of a body's movement when obeying gravity. It is also used in the construction of static structures such as buildings and bridges.

In a modern gravitational field, the center of gravity is identical to the center of mass. However, the two concepts do not always coincide. For the moon, the center of mass is very close to its geometric center. However, its center of gravity is slightly lower than Earth's due to the strong gravitational force of the nearby moon.

In a symmetrically shaped object made of homogenous materials, the center of gravity will match the body's geometric location. However, an asymmetrical object consisting of many components with different dimensions will have its center of gravity at some distance from its geometric center. In the hollow body or irregularly shaped body, the center of gravity in a point outside the body material.

For more such questions on Center of gravity:

https://brainly.com/question/20662235

#SPJ4

a) Angular frequency is  12.75 rad/s b)  The wave number is 33.59m c)

y ( x ,t) = 2.34  x  sin(33.59 x - 12.75t)

Given,

wavelength = λ = 18.7 cm

                   = 0.187 m

amplitude , A = 2.34 cm

v = 0.38 m/s

A) angular frequency = ?

f = v/λ

f = 0.38/1.87 = 2.03

angular frequency ,

ω = 2π f

ω = 2π x 2.03

ω = 12.75 rad/s

B) the wave number,

K = 2π/λ = 33.59m

c) as the wave is propagating in -x direction, the sign is positive between x and t

y ( x ,t) = A sin(k  x - ω t)

y ( x ,t) = 2.34  x  sin(33.59 x - 12.75t)

Learn more about angular frequency here:

https://brainly.com/question/14244057

#SPJ4

Whenever the ground is hit with enough force to crack or break, an earthquake results. Tectonic plate boundaries are linked to the majority of earthquakes.

An earthquake is a quick movement of geological materials beneath the earth's surface that causes the ground to shake violently or weakly. The tectonic plate boundary is where the earthquakes start.

The earthquake is the sudden energy released from the earth's crust that causes the earth's surface to shake. Seismic waves, also called S waves, are consequently produced. The type and severity of an earthquake are based on the local seismic activity.

To know more about earthquake visit:

brainly.com/question/23009699

#SPJ4

According to the question if the secondary coil of transformer has 500 turns, the secondary voltage is 1000 V.

Transformers for power, transformers for distribution, and transformers for isolation, in that sequence. We have Dual Winding Transformer and Autotransformers based on windings. We offer Core Type Transformers, Shell Type Transformers, and Berry Type Transformers based on core designs.

For an ideal transformer

Vs/Vp=Ns/Np

Given that primary voltage V =100 V

Number of turns in primary N = 50 turns

Number of turns in srcondary Ns = 500 turns

Therefore

Vs/100=500/50

Hence voltage across secondary Vs = 1000 V

To learn more about transformer visit:

https://brainly.com/question/15200241

#SPJ4

The spring constant of the spring is 7.497 N/m.

The given parameters;

mass of the block, m = 0.482 kg

extension of the spring, x = 0.630 m

additional extension, = 0.338 m

The spring constant of the spring is calculated as follow

F = mg

Kx = mg

K = mg/x

K = 0.482 × 9.8 / 0.630 = 7.497N/m

F = -kx.

The spring constant, or k, is the proportional constant. It is a gauge of the spring's rigidity. A spring exerts a force F = -kx in the direction of its equilibrium position when it is stretched or compressed to a length that deviates by an amount x from its equilibrium length. The spring constant is calculated by dividing the force required to extend or compress a spring by the length it goes up or down. It is used to assess the stability or instability of a spring, The spring's stiffness is quantified by the spring constant, or k. For various springs and materials, it differs. The stiffer the spring is and the harder it is to stretch, the greater the spring constant.

Learn more about spring constant here:

https://brainly.com/question/14159361

#SPJ4

According to the question, two identical waves undergo pure constructive interference, resultant intensity is quadruple individual wave intensity.

When two or even more sound waves are present at once from distinct sources, they interact with one another to create a new wave. The combination of all previous waves results in the new wave. Interference is the term for wave interaction.

The reflecting light from an oil coating floating on water is one of the best illustrations of interference. Another illustration is the thin coating of a soap bubble (shown in Figure 1), which, when illuminated by either natural or synthetic light sources, reflects a variety of lovely colors.

To learn more about interference visit:

https://brainly.com/question/16098226

#SPJ4