The lowest-energy distribution of electrons in the sublevels for an atom of a particular element is called the ground state.
When an atom, molecule, or ion and its electrons are at their lowest potential energy level, they are said to be in the ground state. They are said to be thrilled if their energy level is higher. Excited electrons are those with energies greater than their ground state. When many quantum mechanical states are present at the same energy, these levels are known as degenerate energy levels.
An electron orbit around an atom's nucleus is referred to as an electron shell or energy level in chemistry. This atomic model by Bohr states that the electrons follow a circular path around the nucleus known as an orbit.
The "K shell" is the shell that is closest to the nucleus; it is followed by the "L shell," the "M shell," and so forth as one moves farther from the nucleus. Quantum numbers (n = 1, 2, 3, 4, etc.) or alphabets (K, L, M,...) can be used to represent the shells.
Learn more about ground state here:
https://brainly.com/question/1314094
#SPJ4
calculate how many grams are in :
2 moles of hydrogens atoms
Answer: 4 grams
Explanation:
The weight of one mole of hydrogen gas is 2 grams.
hence,there are 4 grams in 2 moles of hydrogen atom.
c) Which is the limiting reactant?
-
Cu(s) + AgNO3(aq) → CuNO3(aq) + Ag(s)
2 mol of copper react with 250 g of AgNO3(aq)
a) How many moles of Ag is formed?
b) What mass, in grams of CUNO3(aq) is produced?
c) Which is the limiting reactant?
Answer:
AgNO3(aq) is the limiting reactant
Explanation:
Cu(s) = 2 moles
AgNO3(aq) = 250/169.87 that is the molar mass and we get 1.47 moles
1.47 < 2
What could the fourth quantum number of a 2s² electron be?
O A. mg = -1
O B. ms = 0
O C. mg = +1
O D. mg = + 1/
ANSWER PLS!!
The fourth quantum number of a 2s² electron is -1/2.
What is quantum number?
Quantum numbers are the collection of numbers used to characterise the position and energy of an electron in an atom.
A quantum number is a value used to describe the energy levels that atoms and molecules have. For the hydrogen atom, an electron has four quantum numbers that define its state and produce solutions to the Schrödinger wave equation.
The quantum numbers are as follows:
n - the primary quantum number, which describes the energy level
l denotes azimuthal or angular momentum. quantum number: defines the subshell ml or m - magnetic quantum number: defines the subshell orbital ms or s - spin quantum number: defines the spin
In your scenario, you must decide which possible values can be ascribed to an electron's fourth quantum number in a 2 s 2 orbital.
The electron's energy level, or shell, is described by the primary quantum number. Because the electron is on the second energy level in this situation, n = 2.
The subshell in which the electron is placed is described by the angular momentum quantum number, l. The angular momentum quantum number for an s-orbital is equal to l = 0.
The magnetic quantum number, m l, specifies the orbital in which the electron can be found.
Because it is dependent on the s-orbital, the magnetic quantum number can only take the value 0.
Therefore , fourth quantum number of a 2s² electron is -1/2.
Learn more about quantum number from given link
https://brainly.com/question/2292596
#SPJ1
sodium + calcium hydroxide → sodium hydroxide + calcium
pls help i needs to write it as a skeleton equation and balance the equation
The skeletal and balanced version of the equation would be [tex]2Na + Ca(OH)_2 --- > 2NaOH + Ca[/tex]
Symbol equationsThe symbol equation, which was otherwise referred to as skeletal equation in the illustration is an equation that expresses each participating component of a reaction in its symbolic forms.
On the other hand, a balanced equation of a reaction is the equation in which the number of atoms of different elements present in the reactants is equal to the number present in the products. It does not matter if their forms change, however.
Thus, for the equation: sodium + calcium hydroxide → sodium hydroxide + calcium
Symbol of sodium = Na
Symbol of calcium hydroxide = [tex]Ca(OH)_2[/tex]
Symbol of calcium = Ca
The equation then becomes: [tex]2Na + Ca(OH)_2 --- > 2NaOH + Ca[/tex]
The equation has taken into account the number of atoms of different elements in the reactants and the products. It is already a balanced equation.
More on symbol equations can be found here: https://brainly.com/question/11565028
#SPJ1
Is there an element that starts with L?
Answer:Lanthanum
Explanation:
Lithium stars with the letter L in the periodic table.
What is lithium?
The chemical element lithium has the symbol Li and the atomic number 3. It is a silvery-white alkali metal that is soft. It is the least dense metal and the least dense solid element under ordinary conditions. Because lithium, like all alkali metals, is very reactive and combustible, it must be stored in a vacuum, inert environment, or inert liquid such as pure kerosene or mineral oil. It has a metallic shine when cut, but damp air quickly corrodes it to a dull silvery grey, then black tarnish. It is never found naturally, but only in (typically ionic) compounds such as pegmatitic rocks, which were historically the primary source of lithium. It is found in ocean water due to its solubility as an ion.
Lithium stars with the letter L in the periodic table. Other such elements are Lead, Lanthanum, Lutetium, etc.
To know more about lithium, click on the link
https://brainly.com/question/13596853
#SPJ4
How are sugar molecules in living things classified? (6th grade science)
A) as proteins
B) nucleic acids
C) as lipids
D) as carbohydrates
Answer:
Traits of Collectivist Cultures
In collectivistic cultures, people are considered "good" if they are generous, helpful, dependable, and attentive to the needs of others. This contrasts with individualistic cultures, which often place a greater emphasis on characteristics such as assertiveness and independence
Explanation:
Answer:
D carbohydrates
Explanation:living things are made of four types of molecules, known as macromolecules: proteins, lipids (fats), carbohydrates (sugars) and nucleic acids (DNA and RNA). Each type of macromolecule is made of its own building blocks, which are connected like Legos to form different shapes.
at what trophic level does the fish appear in food web in 2d?
Fishes typically fall into the trophic levels of 2 to 4.7, while marine mammals fall into the trophic levels of 3 to 5.5 and cephalopods fall into the trophic levels of 3.2.
What is tropic level ?The place an organism holds in a food chain determines its trophic level. A food chain is a series of living things that consume other living things and may eventually consume themselves. An organism's trophic level is determined by how far down the food chain it is.
A trophic level in an ecosystem is a stage in the food chain or nutrient cycle. The distance a creature is from the start of the food chain, in simple terms, indicates its trophic level.
Thus, the fishes typically fall into the trophic levels of 2 to 4.7, while marine mammals fall into the trophic levels of 3 to 5.5 and cephalopods fall into the trophic levels of 3.2.
To learn more about tropic level follow the link below;
https://brainly.com/question/15065872
#SPJ1
A 1.362 g sample of an iron ore that contained Fe3O4 was dissolved in acid and all of the iron was reduced to Fe2+. The solution was then acidified with H2SO4 and titrated with 39.42 mL of 0.0281 M KMnO4, which oxidized the iron to Fe3+. The net ionic equation for the reaction is 5Fe2+ + MnO4- + 8H+ h 5Fe3+ + Mn2+ + 4H2O (a) What was the percentage by mass of iron in the ore? (b) What was the percentage by mass of Fe3O4 in the ore?
Based on the equation of the reaction;
the mass of iron (ii) ion present in the sample ore is 0.31 gthe percent mass of iron in the ore is 22.8%What is the percentage mass of iron in the ore?The percentage mass of iron in the ore is determined from the net ionic equation of the reaction as follows:
5 Fe²⁺ + MnO₄⁻ + 8H+ ---> 5 Fe³⁺ + Mn²⁺ + 4 H₂O
The mole ratio of the reaction shows that 5 moles of the iron (ii) ion is oxidized by 1 mole of tetraoxomanganate (vii) ion, MnO₄⁻.
The moles of tetraoxomanganate (vii) ion, MnO₄⁻ that reacted with al the iron present in the ore is determined as follows:
Moles of substance = molarity * volume in liters
Moles of tetraoxomanganate (vii) ion, MnO₄⁻ = 0.0281 * 39.42/1000
Moles of tetraoxomanganate (vii) ion, MnO₄⁻ = 0.001108 moles
Moles of iron (ii) ion present in the sample = 0.001108 * 5
Moles of iron (ii) ion present in the sample = 0.00554 moles
Mass of iron (ii) ion present in the sample = 0.00554 * 56
Mass of iron (ii) ion present in the sample = 0.31 g
Percent mass of iron in the ore = 0.31/1.362 * 100%
Percent mass of iron in the ore = 22.8%
Learn more about percentage mass at: https://brainly.com/question/26150306
#SPJ1
If one-eighth of the mass of the original smple of a radioisotope remains unchanged after 4,800 years, the isotope could be? Show all work and explanation.
A. H-3
B. K-42
C. Sr-90
D. Ra-226
Based on the half-life of the material, the isotope is radium-226; option D
What is the half-life of a substance?The half-life of a substance is the time taken for half of the amount of material present in the original sample of the material to decay.
The half-life of materials differs from each other. The half-life may be in millions of years for some materials, whereas for some materials, the half-life could only be in seconds.
The half-life of materials is constant.
Considering the given material;
One-eighth of the mass of the original sample of the radioisotope remains unchanged after 4,800 years.
For one-eight of the material of the isotope to remain, the number of half-lives it has undergone will be;
after one half-life = half of the original sample remains
after two half-lives = one-fourth of the original sample remains
after three half-lives = one-eight of the original sample remains
The half-life of the isotope = 4800/3
The half-life of the isotope = 1600 years
Radium-226 has a half-life of 1600 yers
Learn more about half-life at: https://brainly.com/question/1160651
#SPJ1
Three students used different
rulers to measure the length of
the sides of a cube.
How many significant figures can
the result be reported with?
2.20 cm x 2.215 cm x 2.2 cm
Answer:
2 significant sigures
Explanation:
Answer: 1 significant figure
Explanation:
What are significant figures?
Significant firgues refer to the numbers following a decimal point. When undergoing addition, subtraction, multiplication, or division, this is determined by the limiting term.
The limiting term is the number that has the least amount of numbers after the decimal point.
2.20 has 2 numbers after the decimal point2.215 has 3 numbers following the decimal point2.2 has 1 number after the decimal pointThis makes 2.2 the limiting term. Whatever answer is reported after the numbers are multiplied together, it must be rounded to where there is only 1 number following the decimal point.
Cyclohexanol, C6H₁1OH, is an organic chemical used in the production of nylon.
How many hydrogen atoms are in 2.25 moles of cyclohexanol? Give your
answer in scientific notation.
5.09 x 1025
1.63 x 1025
9.62 x 1024
1.49 x 1025
The number of atoms of hydrogen present in 2.25 moles of cyclohexanol, C₆H₁₂O is 1.63×10²⁵ atoms
How do I determine the number of atoms?First, we shall determine the number of moles of hydrogen present in 2.25 moles of cyclohexanol, C₆H₁₂O. This is shown below
1 mole of cyclohexanol, C₆H₁₂O contains 12 moles of hydrogen, H
Therefore,
2.25 moles of cyclohexanol, C₆H₁₂O, NF₃ will contain = 2.25 × 12 = 27 moles of hydrogen, H
Finally, we shall determine the number of atoms of hydrogen pressnt in 2.25 moles of cyclohexanol, C₆H₁₂O. This can be obtained as follow:
From Avogadro's hypothesis,
1 mole of hydrogen = 6.02×10²³ atoms
Therefore,
27 moles of hydrogen = 27 moles × 6.02×10²³ atoms
27 moles of hydrogen = 1.63×10²⁵ atoms
Thus, we can draw our conclusion that the number of atoms of hydrogen present is 1.63×10²⁵ atoms
Learn more about number of atoms:
https://brainly.com/question/20712650
#SPJ1
The drinking water in a location in Florida had a foul odor and taste. Investigations revealed that storm water runoff had carried huge amount of soil into the water bodies in the location . What are people in the location most likely to do to prevent the water pollution ?
To filter runoff and stop soil erosion, locals are more likely to grow trees on their property alongside canals and roads.
What is soil erosion and what is its impact on water pollution?
Soil erosion is mostly caused by absence of trees, because the soil cannot hold itself. So if you add trees, there will be less soil erosion.
In addition to lowering soil productivity, soil erosion can have a substantial negative influence on water quality. In surface water bodies, sediment from soil erosion is a significant water quality problem. Reduced water quality is largely caused by increased amounts of phosphorus (P) and nitrogen (N) in surface waters.
When sediments are moved by soil erosion and surface water runoff, N,P can travel from fields into lakes and streams. The role of P- and N-rich sediment in creating eutrophication is one of the many issues that are frequently linked to soil erosion and sediment.
To learn more about soil erosion and water pollution, click on link below
https://brainly.com/question/21851434
#SPJ1
you have available three tanks of different volumes: 900, 600, and 300 l. given a flow rate of 100 l/h, what configuration of tanks would maximize product formation?
The maximization of product production is a typical differential equations problem.
There are how many equations?Equations come in two varieties: identities & conditional equations. All possible values of a variables result in an identity. Only certain combinations of the variables' values make a conditional equation true.
Can I learn chemistry on my own?The science of chemistry is logical. The fundamental ideas are yours to grasp. Although you can examine these ideas in any sequence, it is usually best to start at the top & work your way downward because many ideas depend on your knowledge of units, conversions, and interactions between atoms and molecules.
To know more about Molecules visit:
https://brainly.com/question/19556990
#SPJ4
Identify the element with the lowest exothermic (least negative) electron affinity based on periodic trends.
a. Sr
b. Na
c. F
d. P
Answer: F
Explanation: As we move from left to right in a period, electron affinity increases due to the increases in the effective nuclear charge.
However, it will not be easier to add an electron to a smaller atom. As we move in a group from top to bottom, electron affinity decreases but flourine has the smallest size in its group. So, on adding another electron externally to the valence shell causes severe electron-electron repulsion.
the reaction catalyzed by pyruvate carboxylase is an example of a(n) reaction because it replenishes the citric acid cycle intermediates that have been siphoned off for use in other reactions.
The reaction catalyzed by pyruvate carboxylase is an example of an anaplerotic reaction.
What is an anaplerotic reaction?
Anaplerotic reactions are metabolic processes that replace depleted oxaloacetate in the citric acid cycle. These processes aim to maintain stable ATP concentrations to enable continued cellular respiration.
The anabolic reaction known as the anaplerotic reaction aids in producing the intermediate components of the metabolic pathways. The name of the intermediate reaction step in such a reaction is anaplerotic pathways. Anaplerotic reactions play a significant role in metabolism, which means they are crucial for biochemical processes like lipid production and citric acid pathways. In this article, we primarily concentrate on the anaplerotic reaction and anaplerotic routes for anaplerotic pathways. It focuses on the physiological function of anaplerosis.
Learn more about anaplerotic reaction here: brainly.com/question/16776268
#SPJ4
an aqueous solution contains 0.33 m ammonia. one liter of this solution could be converted into a buffer by the addition of: (assume that the volume remains constant as each substance is added.) (select all that apply.) 0.16 mol 0.34 mol 0.33 mol 0.34 mol 0.16 mol
An aqueous solution contains 0.33 m ammonia. one liter of this solution could be converted into a buffer by the addition of 0.16 mol of HBr.
What is buffer?A buffer is defined as the solution of weak base and salt of weak base and strong acid.
or it is also defined as the solution of weak acid and salt of weak acid and strong base.
In this given problem,
NH3 behave as a weak base. On the other hand, NH4OH behave as a salt of weak base and strong acid.
As we know that, NH3 react with strong acid to form NH4OH.
Chemical equation:
NH3 + HBr ------ NH4OH
or NH4OH + HBr ------- NH4Br + H2O
Thus, we concluded that an aqueous solution contains 0.33 m ammonia. one liter of this solution could be converted into a buffer by the addition of 0.16 mol of HBr.
learn more about Buffer:
https://brainly.com/question/10695579
#SPJ4
after studying the causes of physical weathering in the table on the next page, infer wich type of weathering caused the rock shown above to split.explain your reasoning
Physical weathering is caused by the effects of temperature changes on rocks, causing them to break apart. The process is sometimes aided by water.
Abrasion Weather effects such as wind and water break rocks into small pieces. Exfoliated weathered rock expands and fractures when pressure is released from unloading. Frostwedge rock cracks when water freezes and expands. Chemical weathering involves the interaction of rocks with mineral solutions (chemicals), changing the composition of rocks.
Rocks are formed by weathering and erosion that break down existing rocks through physical and chemical processes. Examples of chemical weathering include rust caused by oxidation and acid rain caused by carbonic acid dissolving rocks. Other Chemical Weathering B. Dissolution. Rocks and minerals break down to form soil.
Learn more about Weathering here:-https://brainly.com/question/829782
#SPJ9
g what is the molarity of a solution made by adding 50 ml of 2.00 m nitric acid with enough water to make 450.0 ml of solution?
The molarity of a solution made by adding 50 ml of 2.00 m nitric acid with enough water to make 450.0 ml of solution is 0.22 M
What is Molarity?
It is defined as number of moles of solute per liter of solution
M = n / V
where
n = no of moles
M = molarity
V = volume
Molarity in mL
M = (n / V ) * 1000
Moles of Nitric acid = (50/1000 )* 2 = 0.1 moles
Volume of solution is 450 mL
Substituting,
Molarity = ( 0.1 / 450)* 1000 = 100/450 = 0.22 M
Learn more about molarity at - Brainly.com https://brainly.com/question/14469428
#SPJ4
Assuming only single bonds are used…
1. what shape does a central atom from group 4a (14) have?
2. what shape does a central atom from group 5a (15) have?
3. what shape does a central atom from group 6a (16) have?
1) Assuming that only single bonds are formed by group 4A(14) elements, the shape of a central atom of group 14 is tetrahedral.
The general electronic configuration of group 14 elements is ns²np² and it is shown in box diagram in the attached image. When one electron is excited, it goes in vacant p-orbital and the p and s-orbital is half filled. It is shown in attached image.
When the another atoms are filled in the half-fiiled orbital, it forms sp³ hybridisation and its shape is tetrahedral.
Therefore, the shape of central atom of group 14 is tetrahedral.
2) Assuming that only single bonds are formed by group 4A(14) elements, the shape of a central atom of group 15 is pyramidal.
The general electronic configuration of group 15 element is ns²np³ and its box diagram is already shown in the image. When atoms are filled, it goes in p-orbital and pair of electron acts as a lone pair. Due to this lone pair, lone pair-bond pair repulsion is occurred and the geometry of the central atom is pyramidal.
Therefore, the shape of central atom of group 15 is pyramidal.
3) Assuming that only single bonds are formed by group 4A(14) elements, the shape of a central atom of group 16 is bent.
The general electronic configuration of group 16 is ns²np⁴ and its box diagram is shown in the attached image. There are two electron pairs which acts as a lone pair and another two orbitals are filled by another atom. When they are filled, it shows lone pair-lone pair, lone pair-bond pair and bond pair-bond pair repulsion. Therefore, they are come closer to each other and forms bent shape.
Therefore, the shape of the central atom of group 16 is bent shape.
To know more about the shape and hybridisation of the central atom
https://brainly.com/question/13291133
#SPJ1
PLEASE ANSWER MINE:
Light travels in a straight line when it ____________________.
A. passes from one medium to another
B. travels through a uniform medium
C. is absorbed by an object
D. reflects off of an object’s surface
Answer: A. passes from one medium to another
Explanation: Light will change directions slightly forming a straight line.
a certain drug is made from only two ingredients: compound a and compound b. there are milliliters of compound a used for every milliliters of compound b. if a chemist wants to make milliliters of the drug, how many milliliters of compound a are needed?
To calculate it using the formulas and learn about drug.
What is drug?
Drugs are by definition chemicals that, when ingested into a living system, influence or modify physiology. Both natural and artificial materials are acceptable. They are low-mass chemical structures, both in terms of atomic and molecular mass.
What is chemist?
At the atomic and molecular levels, chemists look into the characteristics of matter. They gauge proportions and reaction rates to better comprehend new substances and their behavior or to develop novel compounds for use in a variety of real-world scenarios.
Ratio of the compounds A and B are given as
compound A: compound B= 6:5
Now, chemist own to make a drug of 814ml, so we have to distribute these 814 ml in the ratio of 6:5. To make chemically correct drug.
Amount of compound=6/(6+5*814)
=6/11*814=444 ml
∴ Amount of compound a is needed 44 ml.
Therefore, 44 millimeters of a compound are needed.
To learn more about drug from the given link.
https://brainly.com/question/1189815
#SPJ4
Complete the following statement: when ---(1)--- freezes at 0⁰
Celsius, it will ---(2)---.
When water freezes at [tex]O^{o}[/tex] Celsius. it will release heat.
When the liquid water turns to solid ice we find that water freezes without getting any colder. That's because the latent heat of fusion is being lost from the liquid as it solidifies and the temperature of the water does not fall so quickly
Does freezing water release heat?
When water becomes a solid, it releases heat, warming up its surroundings. This makes freezing an exothermic reaction.
Does water melt or freeze at 0 Celsius?
At temperatures below 32°F (0°C), liquid water freezes.
Thus, when water freezes at [tex]O^{o}[/tex] Celsius. it will release heat.
To know more about water at [tex]O^{o}[/tex]C:
https://brainly.com/question/19435044
#SPJ1
How much water would form if 14. 8 grams of hydrogen reacted with 34. 8 grams of oxygen.
When 14. 8 grams of hydrogen is reacted with 34. 8 grams of oxygen. then water formed is 39.1935 grams.
What is reaction?A process that leads to the chemical transformation of one set of chemical substances to another is called a chemical reaction .
2H2 + 02 → 2H20
Given, mass of hydrogen = 14.8 grams
and we know molar mass of hydrogen = 2.02 g/mole
given, mass of oxygen = 34.8 grams
we know molar mass of oxygen = 32 g/mole
As we know that : moles is equal to mass / Molar mass
then, moles of hydrogen = 14.8g/ 2.02 g/mole = 7.33 moles
and moles of oxygen = 34.8g / 32g/mole = 1.0875 moles
For 2 moles hydrogen consumed, 1 mole of oxygen is needed.
This implies that oxygen is the limiting reagent and will be consumed completely.
We see that for 2 moles of H2 consumed, 1 mole of O2 is needed to produce 2 moles of H2O.
For 1.0875 moles of oxygen consumed, moles of H2O produced will be 2.175
We know, mass of H2O = moles of H2O * Molar mass of H2O
Hence, mass of H2O = 2.175 moles * 18.02 g/moles
Therefore, mass of H2O =39.1935 grams
To know more about reaction, refer
https://brainly.com/question/16416932
#SPJ4
The pressure of a gas is reduced from 1200. 0 mm hg to 850. 0 mm hg as the volume of its container is increased by moving a piston from 85. 0 ml to 350. 0 ml. What would the final temperature be if the original temperature was 90. 0 °c?.
Answer: T2=233K
Explanation:
The pressure and volume change. The combined gas law is always needed for that concept.
P1*V1/T1=P2*V2/T2
Temperature MUST ALWAYS be in Kelvin
T1=90+273=363K
1200*85/363=850*350/T2
T2=233K
Hope this helps! :)
What atom is helium?
Answer:
Helium is a chemical element with the symbol He and atomic number 2
Helium is an element with the formula He and the atomic number 2.
What is an element?
A chemical element is a type of atom with a particular number of protons in the nucleus, such as the specific compound made up entirely of that species. Chemical elements, unlike chemical compounds, cannot be broken down into simpler substances by any chemical reaction. The number of protons in the nucleus is an element's defining attribute, and it is symbolised by the symbol Z - all atoms with the same atomic number are atoms of the same element. Atoms are rearranged into new compounds linked together by chemical bonds when various elements undergo chemical reactions.
Helium is an element with the formula He and the atomic number 2.
To know more about elements, click on the link
https://brainly.com/question/14742603
#SPJ4
Consider the proposed structure of carbon dioxide. :0-C-0: Determine whether the structure is correct and justify your decision. Select one: This structure is incorrect due to the total number of electrons. This structure is incorrect because the octet rule is not fulfilled. This structure is correct due to exceptions to the octet rule. This structure is correct due to the total number of bonds. O
This structure is incorrect because the octet rule is not fulfilled.
Lewis formulated the "octet rule" in his atom theory. The octet rule generally refers to the tendency of atoms in order to have eight electrons in the valence shell. When the atoms have fewer than eight electrons, they tend to react with other atoms and form more stable compounds. Usually atoms will react to get in the most stable state possible that is will try to satisfy the octet rule.
To find if octet is satisfied first we need to determine the number of electrons from lone pairs and bonds to the atom. Each lone pair will donate two valence electrons to the atom and each bond is represented by a line, gives two valence electrons to the atom. Second we need to confirm that the added up number of valence electrons is 8, or 2 for hydrogen.
In case of CO2 we can see that the octet rule is not satisfied so its the wrong structure.
To know more about octet rule
https://brainly.com/question/10535983
#SPJ4
What will happen to the carbon dioxide produced by the link reaction in an animal?.
Answer:
Explanation:
Inglish:
Some of the CO2 is released back into the atmosphere through plant respiration (ie plants "exhaling"). Plant-eating animals digest sugar molecules from plants for energy. During their respiration, excretion and decomposition they release some CO2 into the atmosphere.
español:(spanish)
Parte del CO2 se libera de nuevo a la atmósfera a través de la respiración vegetal (es decir, plantas "exhalando"). Los animales que comen plantas digieren las moléculas de azúcar de las plantas para obtener energía. Durante su respiración, excreción y descomposición liberan algo de CO2 a la atmósfera
Link reaction is the cellular respiration in animals. They produce carbon dioxide which is released to the air. This carbon dioxide is utilized plants for photosynthesis.
What is link reaction?Link reaction is composed of the glycolysis and aerobic respiration by mitochondria. In glycolysis, pyruvate molecule is decarboxylated and forms acetate. This stage produces carbon dioxide.
The pyruvate then dehydrogenate and losses its hydrogen to NAD+. The NADH formed is used to produce ATP during the process called oxidative phosphorylation.
The carbon dioxide removed by the process is taken by the green plants during photosynthesis to combine with water producing glucose which is stored as their chemical energy.
To find more on link reaction, refer here:
https://brainly.com/question/29389253
#SPJ2
suppose you mix g of water at with g of water at in an insulated cup. what is the maximum temperature of the water after mixing?
The maximum temperature of the water after mixing is 38.51°C
Heat values is derived from the equation:
q = mcΔT
where
q = heat ( J)
m= mass ( kg)
c = specific heat capacity
ΔT = change in temperature
T2 = final temperature
T1 = initial temperature
M of H2O × c × ( T1 - T2) = M of H2O × c × ( T2 - T1 )
29.2 g × ( 78.2° - T2 ) = 67.3 × ( T2 - 21.3° )
2283.44 - 29.2 ×T2 = 67.3 × T2 - 1433.49
3716.93 = 96.5 × T2
T2 = 38.51°C
Learn more about specific heat at https://brainly.com/question/21406849
#SPJ4
Note: here is the completed question
Suppose you mix 29.2 g of water at 78.2°C with 67.3 g of water at 21.3°C in an insulated cup. What is the maximum temperature of the water after mixing?
Carbonated cola is more acidic than coffee or even orange juice because cola contains phosphoric acid. What is the molar concentration of h3o+ in a cola that has a ph of 3. 120?.
The molar concentration of h3O+ = 7.59 × 10^-4 M
What is pH value?
It is a measure of how acidic or basic water is. It is determined by its pH. From 0 to 14, with 7 serving as neutral, the range is available. Acidity is indicated by pH values lower than 7, while baseness is indicated by pH values higher than 7. A critical indicator of water quality is the pH of the solution.
The molar concentration of [H3O+] in a cola with a pH of 3.120 can be calculated by:
[H3O+]=10−pH
[H3O+]=10−3.120
[H3O+]=7.59×10−4M
Ingestion of large amounts of phosphoric acid found in cola can upset the body's regulation of bone metabolism and reduce the absorption of calcium from the diet. For this reason, people who are at risk of developing osteoporosis are often advised not to drink much cola.
To know more about pH values click here,
https://brainly.com/question/172153
#SPJ4
What volume of a 0. 100mhcl stock solution should be used to prepare 250. 00ml of 0. 0250mhcl?.
62.5 mL is prepare .
What is molarity?
Molar concentration is a unit of measurement for the concentration of a chemical species, specifically a solute, in a solution, expressed as the amount of substance per unit volume of solution. The most often used unit for molarity in chemistry is the number of moles per litre, denoted by the unit symbol mol/L or mol/dm3 in SI units.
Molarity of the stock solution as 0.100 M
Volume of the dilute solution as 250 mL
Molarity of dilute solution as 0.0250 M
We are required to calculate the Volume of the stalk solution.
Taking the volume and molarity of the stock solution to be V₁ and M₁ respectively, and volume and molarity of the dilute solution to be V₂ and M₂ respectively.
We are going to use the dilution formula;
According to the dilution formula, M₁V₁ = M₂V₂
Rearranging the formula;
V₁ = M₂V₂ ÷ M₁
= (0.025 M × 0.25 L) ÷ 0.100 M
= 0.0625 L
But, 1 L = 1000 mL
V₁ = 62.5 mL
Therefore, the volume of the stock solution is 62.5 mL
Learn more about molarity from given link
https://brainly.com/question/26873446
#SPJ4