The load for house electric clothes dryers in a dwelling unit(s) shall be 5000 watts (volt-amps) or the nameplate rating, whichever is larger, for each dryer served.
This requirement can be found in section 220.54 of the National Electric Code. It is important to note that the nameplate rating of the dryer should always be taken into consideration when determining the load, as it may vary depending on the specific model and manufacturer.
The load for house electric clothes dryers in a dwelling unit(s) shall be 5,000 watts (volt-amps) or the nameplate rating, whichever is larger, for each dryer served. This is according to the National Electrical Code (NEC) section 220.54.
Learn more about NEC here:
brainly.com/question/28259564
#SPJ11
Secure rooms are usually built to commercial standards and provide a similar level of protection as a vault. True or False?
True. Secure rooms are typically built to commercial standards and can offer similar levels of protection to a vault, depending on the specific features and construction of the room.
Secure rooms are built to commercial standards and are designed to provide a high level of protection against theft, fire, natural disasters, and other threats. They are often used by businesses, organizations, and individuals to store valuables such as cash, jewelry, important documents, and data backups. Secure rooms can be equipped with various security features such as reinforced walls and doors, electronic locks, surveillance cameras, motion detectors, alarms, and fire suppression systems. The level of protection provided by a secure room depends on the specific security measures implemented and the quality of materials used in its construction. Overall, a properly built and equipped secure room can provide a level of protection similar to that of a vault.
Learn more about commercial here-
https://brainly.com/question/20913121
#SPJ11
(334-15(C)) Where NMC cable is run at angles with joists in unfinished basements it shall be permissible to secure cables not smaller than ____ conductors directory to the lower edge of the joist.
According to the National Electric Code (NEC) section 334.15(C), when NMC cable is run at angles with joists in unfinished basements, it shall be permissible to secure cables not smaller than two conductor's directories to the lower edge of the joist. This means that the cable must be secured to the joist in a way that prevents it from sagging or moving, and it must not be smaller than two conductors in size.
When running NMC cable at angles with joists in unfinished basements, it is permissible to secure cables not smaller than two conductors directly to the lower edge of the joist. Here's the step-by-step explanation:
1. Identify the location: In this case, it's an unfinished basement with joists.
2. Determine the cable type: You mentioned NMC cable, which is a nonmetallic-sheathed cable.
3. Consider the installation method: The cable is run at angles with joists.
4. Check the permissible conductor size: Based on the guidelines, secure cables not smaller than two conductors directly to the lower edge of the joist.
Learn more about NMC cable here: brainly.com/question/31566099
#SPJ11
In a memory ad for DIMMs, you notice 64Meg x72 for one DIMM and 64Meg x64 for another DIMM. What does the 72 tell you about the first DIMM?
The "64Meg x72" specification for the first DIMM indicates that it is a type of registered ECC (Error-Correcting Code) memory module, which is commonly used in servers and high-end workstations.
The "x72" refers to the number of data bits that are stored on the DIMM. In this case, the DIMM stores 64 Megabytes (64Meg) of data per module and uses a 72-bit data path. The extra 8 bits are used for error correction, which helps to detect and correct errors that can occur during data transfer.
The ECC technology adds extra reliability to the memory module, which is essential for critical applications that require high levels of data integrity and uptime.
However, it also increases the cost of the memory module compared to non-ECC memory.
Learn more about computer memory and the notation: https://brainly.com/question/25996355
#SPJ11
Which two statements describe the functions or characteristics of ROM in a router? (Choose two.)
two functions or characteristics of ROM in a router are:
1. It contains firmware for basic device operation.
2. It stores bootstrap code to initiate the router's operating system.
Read-Only Memory (ROM) in a router is a non-volatile memory that retains its contents even when the router is powered off. It contains firmware that is essential for basic device operation, such as the router's Power-On Self Test (POST) and diagnostics. Additionally, ROM stores the bootstrap code, which is executed when the router boots up and is responsible for initializing the router's hardware and loading the operating system into memory. This process is critical to the router's operation as without it, the router would not be able to function properly.
learn more about function here:
https://brainly.com/question/14237806
#SPJ11
What are two functions or characteristics of ROM in a router?
Question 79
What is the horizontal part of the stairs you step on called?
a. Riser b. tread
c. Step
d. Footer
The horizontal part of the stairs you step on is called the "tread". The tread is the part of the stair that provides a flat surface for you to step on as you ascend or descend the stairs.
Stairs are a common feature in architecture and are used to provide access between different levels of a building. They are typically made up of a series of treads and risers that are arranged in a vertical sequence. Stairs can be constructed using a wide range of materials, including wood, metal, concrete, and stone, and can be designed to match the style of the building they are located in. Stair design is an important consideration in building construction, as it must provide a safe and comfortable means of accessing different levels of the building. Stairs must also comply with building codes and safety standards to ensure that they are structurally sound and safe to use.
Learn more about the stairs here:
https://brainly.com/question/28720025
#SPJ11
Receptacles incorporating an isolated grounding connection shall be identified by an _________ triangle located on the face of the receptacle.
406.3(d)
Receptacles incorporating an isolated grounding connection shall be identified by an orange triangle located on the face of the receptacle. This is required by code section 406.3(d).
The purpose of this identification is to ensure that users are aware of the presence of an isolated grounding connection and use it properly for electrical safety.Yes, that is correct. Receptacles incorporating an isolated grounding connection shall be identified by an equilateral triangle located on the face of the receptacle. This triangle shall be a green color and shall be located at the bottom of the receptacle opening where visible after installation. (Reference: NEC 2017, Article 406.3(D))
To learn more about receptacle click the link below:
brainly.com/question/28215225
#SPJ11
You are asked to investigate your company’s procedure to make the sheet and identify possible problems. List the manufacturing process steps and likely problem areas for each step.
A general outline of some common steps involved in sheet manufacturing, along with some potential issues that could arise in each step:
How to explain the stepsRaw material selection: This step involves choosing the appropriate materials to use in the sheet manufacturing process. Potential issues in this step could include the availability or quality of the raw materials, or any regulatory requirements related to their use.
Preparation of raw materials: Depending on the type of sheet being manufactured, this step may involve cutting, slicing, or shredding the raw materials. Potential issues in this step could include problems with the machinery used to prepare the materials, or difficulties in maintaining consistency in the size or shape of the prepared materials.
Mixing: In some cases, the prepared raw materials may need to be mixed together before they can be formed into a sheet. Potential issues in this step could include difficulties achieving a consistent mix, or problems with the equipment used to mix the materials.
Forming: This step involves taking the mixed or prepared materials and shaping them into a sheet. Potential issues in this step could include problems with the equipment used to form the sheet, such as mechanical breakdowns or difficulties achieving the desired thickness or shape.
Drying or curing: Depending on the materials used, the sheet may need to be dried or cured in order to achieve its final properties. Potential issues in this step could include difficulties achieving the right temperature or humidity conditions for drying or curing, or problems with the equipment used for these processes.
Finishing: Once the sheet is formed and dried or cured, it may undergo additional finishing processes such as cutting, trimming, or coating. Potential issues in this step could include difficulties achieving a consistent finish, or problems with the equipment used for these processes.
Quality control: Throughout the manufacturing process, quality control measures should be in place to ensure that the sheet meets the required specifications. Potential issues in this step could include problems with the accuracy or reliability of quality control tests, or difficulties in identifying and addressing quality issues.
Learn more about manufacturing on
https://brainly.com/question/13440987
#SPJ1
What is the purpose of the network security authentication function?
The purpose of network security authentication function is to verify and authenticate the identity of users or devices attempting to access a network or system.
Why is network security authentication important for networks?Network security authentication is important for networks to ensure that only authorized users or devices are granted access which helps to prevent unauthorized access and potential security breaches.
Authentication methods such as passwords, biometrics, and multi-factor authentication provide an additional layer of security to protect against unauthorized access. It also helps track and monitor user activity, allowing for better control and management of network resources.
Read more about security authentication
brainly.com/question/28344005
#SPJ1
What is the primary reason to subnet IPv6 prefixes?
Explanation:
The primary purpose of subnetting IPv6 address space is to improve address allocation efficiency by subnetting a segment of a network address space.
please make me brainalist and keep smiling dude
As a minimum, what technology can be an inexpensive redundant storage option for thick clients?A.RAID 6B.RAID 5C.RAID 1D.RAID 0
For thick customers, RAID 1, commonly referred to as mirroring, might be a cheap redundant storage solution. It includes mirroring the data over two hard drives to provide redundancy in the event of disc failure.
RAID 1, also known as mirroring, can be an inexpensive and simple solution for providing redundancy in storage for thick clients. It involves using two hard drives where one drive mirrors the other, creating an identical backup of the data. This means that if one drive fails, the other can continue to function seamlessly without any data loss or downtime. While RAID 1 provides redundancy, it is important to note that it does not increase performance or capacity, as the mirrored backup uses the same amount of storage as the primary drive. Nonetheless, RAID 1 remains a popular choice for users seeking an inexpensive and reliable way to safeguard their data.
Learn more about RAID 1 for Thick Clients here.
https://brainly.com/question/14669307
#SPJ11
What term is used when a water utility divides its total operating expenses into the total revenue?
a.) Debt ratio
b.) Operating ratio
c.) Credit ratio
d.) Coverage ratio
The term used when a water utility divides its total operating expenses into the total revenue is the operating ratio. This ratio is an important financial metric used by utilities to measure their efficiency and profitability.
The operating ratio is calculated by dividing the total operating expenses by the total revenue. This ratio provides insight into the efficiency of the utility's operations and can be used to identify areas where cost savings can be achieved. A lower operating ratio indicates that the utility is more efficient in its operations, while a higher operating ratio indicates that the utility is less efficient and may be spending too much on operating expenses.
In the case of a water utility, operating expenses would include items such as labor costs, maintenance expenses, and equipment costs, among others. By monitoring the operating ratio, the utility can ensure that it is operating in a financially sustainable manner while still providing reliable service to its customers.
Learn more about utility here: brainly.com/question/31385674
#SPJ11
Designation of a restricted area is the responsibility of the Physical Security Director: True or False?
Answer: True. The designation of a restricted area falls under the responsibility of the Physical Security Director, as they are responsible for ensuring the security of the facility and its assets. By designating certain areas as restricted.
The Physical Security Director can ensure that only authorized personnel have access to sensitive information or high-value assets.
Protective services or physical security cannot be pitted against the information security role inside physical security. This assertion is false.
The CIA triptych must be taken into account when talking about data and information. The CIA trinity is a notion in information security that consists of three components: confidentiality, honesty, and availability. Each component of the system stands for a significant information security goal.
Situational awareness and homeostasis are promoted by security. Without protection, people frequently grow accustomed to their surroundings and fail to detect odd behaviour from nearby workers and residents. Since awareness is a constant process and individuals aspire to behave responsibly, security fosters a positive and proactive culture.
Learn more about physical security here
https://brainly.com/question/29981144
#SPJ11
Does a static member variable come into existence in memory before, at the same time as, or after any instances of its class?
A static member variable comes into existence in memory before any instances of its class. This is because static members are shared among all instances of a class and are created as soon as the program starts executing.
They are stored in a special area of memory called the "static data area" or "static memory". On the other hand, instances of a class are created dynamically during runtime and each instance has its own set of non-static member variables.
It comes into existence in memory before any instances of its class. This is because static members are associated with the class itself, rather than individual instances. They are created and initialized when the class is loaded, and only one copy exists in memory, which is shared among all instances of the class.
Learn more on Static Member Variable here : brainly.in/question/13765572
#SPJ11
5163 - If the airspeed is increased from 90 knots to 135 knots during a level 60 degree turn, the load factor will:- increase as well as the stall speed-decrease and the stall speed will increase-remain the same but the radius of turn will increase
If the airspeed is increased from 90 knots to 135 knots during a level 60 degree turn, the load factor will increase as well as the stall speed.
This is because the load factor is directly proportional to the square of the speed and the tangent of the bank angle. Therefore, increasing the speed and the bank angle will increase the load factor. Additionally, the stall speed will also increase due to the increased load factor. The radius of turn will remain the same, as it is determined by the speed and degree of bank, not the change in airspeed.
If the airspeed is increased from 90 knots to 135 knots during a level 60-degree turn, the load factor will increase as well as the stall speed.
Here's the step-by-step explanation:
1. Airspeed refers to the speed of an aircraft relative to the air around it. In this case, the airspeed increases from 90 knots to 135 knots.
2. The turn being discussed is a level 60-degree turn, meaning the aircraft is maintaining a constant altitude while turning at an angle of 60 degrees.
3. As the airspeed increases, the aircraft must generate more lift to maintain the level turn. This results in an increase in the load factor, which is the ratio of the lift produced to the aircraft's weight.
4. When the load factor increases, the stall speed also increases. Stall speed is the minimum airspeed at which an aircraft can maintain level flight without stalling (losing lift). A higher load factor requires a higher airspeed to prevent stalling.
So, when the airspeed increases from 90 knots to 135 knots during a level 60-degree turn, both the load factor and stall speed will increase.
Learn more about load factor at: brainly.com/question/30429887
#SPJ11
Plants, shrubs, and branches should be cleared away from around an outdoor condensing unit primarily because _______________.
Plants, shrubs, and branches should be cleared away from around an outdoor condensing unit primarily because they can obstruct the airflow and hinder the unit's ability to condense and release heat properly, which can lead to reduced efficiency and potentially cause damage to the unit.
Plants, shrubs, and branches should be cleared away from around an outdoor condensing unit primarily because this ensures proper airflow and prevents debris from obstructing the unit's functionality, thus maintaining its efficiency and prolonging its lifespan.
Learn more about branches here: brainly.com/question/14165530
#SPJ11
(300-16(B)) A bushing can be used instead of a box where conductors emerge from a raceway and enter or terminate at equipment such as switchboards, unenclosed control equipment, or similar equipment.(True/False)
True. A bushing is a device used to insulate and protect electrical conductors where they enter or terminate at equipment.
It is commonly used as an alternative to a box when conductors emerge from a raceway and need to be connected to equipment such as switchboards or unenclosed control equipment. Bushings come in various sizes and materials to accommodate different types of conductors and equipment. They also help to prevent electrical arcing and short circuits, improving the safety and reliability of the electrical system.
Learn more about bushing here;
https://brainly.com/question/31563047
#SPJ11
Restricted areas may be different types depending on the nature and varying degree of importance of the security interest. True or False?
True. Restricted areas can have varying degrees of security interests, such as national security, public safety, or confidentiality of information.
The nature of the security interest determines the type of restriction, which can range from physical barriers, access control measures, or legal restrictions. The degree of importance can also vary, depending on the potential consequences of unauthorized access or disclosure of information. For example, a military base may have a higher level of security interest than a corporate office with proprietary information. Thus, the type and level of restrictions placed on a restricted area will depend on the nature and degree of importance of the security interest.
learn more about security interests here:
https://brainly.com/question/28287283
#SPJ11
Formula for determining the asphalt spread rate for an FC-5 mix?
The asphalt spread rate for an FC-5 mix can be determined using the following formula: Asphalt Spread Rate (in pounds per square yard) = (Mix weight per square yard in pounds) / (% asphalt binder in mix)
To understand this formula, let's break it down into its individual components.
Mix weight per square yard: This refers to the weight of the asphalt mix per square yard of pavement. The mix weight can be calculated by adding up the weight of each component in the mix, including aggregates, asphalt binder, and any additives.
% asphalt binder in mix: This refers to the percentage of the total mix weight that is made up of asphalt binder. For an FC-5 mix, this percentage is typically around 5%.
By dividing the mix weight per square yard by the % asphalt binder in the mix, we can calculate the amount of asphalt binder needed to cover one square yard of pavement at the desired thickness. This result is expressed in pounds per square yard and represents the spread rate of the asphalt mix.
It's important to note that the asphalt spread rate will vary depending on the desired thickness of the pavement layer and the specific properties of the asphalt mix being used. Therefore, it's essential to consult with a qualified engineer or asphalt supplier to determine the appropriate mix design and spread rate for your particular project.
Learn more about asphalt mix here:
https://brainly.com/question/20039044
#SPJ11
What is the advantage of overloading the << and >> operators?
The advantage of overloading the << and >> operators is that it allows for more intuitive and readable input and output operations for user-defined classes. This means that instead of having to use complex and lengthy functions or methods to perform input and output operations on objects of a class.
The overloaded output operations can be used instead, making the code simpler and more concise. Additionally, overloading operators allows for more natural and intuitive syntax, making the code more readable and easier to understand.
When the result of one operation serves as the input for another, this is known as sequential interdependence. However, this interdependence need not always loop back to the first operation. The assertion is untrue.
When the output of operation A becomes the input of operation B but the output of operation B does not become the output back to operation A, there is a case of sequential interdependence. In other words, the outcome of operation A determines the outcome of operation B, but the opposite is true for operation B's outcome.
The situation outlined in the statement is an illustration of circular dependency, also known as a feedback loop, in which the results of each activity depend on one another.
Learn more about output operations here
https://brainly.com/question/31427784
#SPJ11
When plate electrodes are used for grounding, each electrode shall be expose a minimum of _____ of surface to exterior soil.
250.53(7)
According to the National Electrical Code (NEC) section 250.53(7), when plate electrodes are used for grounding, each electrode shall be exposed to a minimum of "2 square feet" of surface area to exterior soil.
Grounding is the process of connecting electrical equipment or systems to the earth, or to a conductor that is connected to the earth, for safety and functional purposes. Grounding helps to protect people and equipment from electrical shocks by providing a low-resistance path for electrical current to flow to the earth. It also helps to reduce electrical noise and interference in electronic equipment by providing a stable reference point for electrical signals. Proper grounding is an essential part of electrical safety and is required by building codes and regulations. Grounding can be achieved through a variety of methods, including grounding rods, grounding plates, and grounding wires. It is important to follow proper grounding procedures to ensure the safety and proper functioning of electrical systems.
Learn more about grounding here:
https://brainly.com/question/30242004
#SPJ11
Except for specially designed recessed fixtures, thermal insulation is not permitted within _______ inches of a lighting fixture, enclosure, wiring compartment or ballast.
410.104(b)
"Except for specially designed recessed fixtures, thermal insulation is not permitted within 3 inches of a lighting fixture, enclosure, wiring compartment, or ballast."
The National Electrical Code (NEC) specifies in section 410.104(b) that thermal insulation should not be placed within 3 inches of a lighting fixture, enclosure, wiring compartment, or ballast. This is because such insulation can trap heat generated by the fixture or its components, leading to overheating and potentially causing a fire hazard. However, specially designed recessed fixtures are an exception to this rule, as they are specifically designed to accommodate insulation without causing a fire hazard. It is important to adhere to this code to ensure the safety of the building and its occupants.
Learn more about thermal insulation here:
https://brainly.com/question/27932945
#SPJ11
A chlorine leak can be detected by?
a. An explosimeter
b. Checking the leak gauge
c. Applying ammonia vapor
d. A tri-gas detector
"A chlorine leak can be detected by a tri-gas detector."
A tri-gas detector is a portable device that can detect the presence of three gases: oxygen, combustible gases, and toxic gases. Chlorine gas is a highly toxic gas that can cause respiratory problems and irritation when inhaled. In industrial settings, chlorine is commonly used as a disinfectant, in the production of chemicals and plastics, and in water treatment processes. In the event of a chlorine leak, a tri-gas detector can quickly alert workers to the presence of chlorine gas in the air, allowing them to evacuate the area or take other appropriate safety measures. An explosimeter is a device used to detect explosive gases and vapors, while a leak gauge is a tool used to measure the amount of gas leaking from a container or pipeline. Applying ammonia vapor can be used to detect leaks in certain types of refrigeration systems, but it is not an effective method for detecting chlorine leaks. Therefore, a tri-gas detector is the most suitable device for detecting a chlorine leak.
Learn more about tri-gas detector here:
https://brainly.com/question/4513701
#SPJ11
5207 - If an airplane is loaded to the rear of its CG range, it will tend to be unstable about its:-Vertical axis- lateral axis-longitudinal axis
If an airplane is loaded to the rear of its CG (center of gravity) range, it will tend to be unstable about its longitudinal axis. This is because the distribution of weight affects the airplane's pitching moment and stability, with the rearward shift of CG increasing the potential for a nose-up pitching tendency.
The longitudinal axis runs from the nose to the tail of the airplane and is the axis around which the airplane pitches (nose up or nose down). If the center of gravity is too far back, it can cause the tail of the airplane to become too heavy, making it difficult to control the pitch of the airplane. This can lead to a dangerous situation where the airplane is difficult to control and may even stall or spin. It is important for pilots to ensure that their airplane is loaded within the proper CG range to maintain stability and safety in flight.
Learn more about gravity here-
https://brainly.com/question/31321801
#SPJ11
How many notches does a DDR 3 DIMM have?
A DDR3 DIMM (Dual In-line Memory Module) typically has 240 notches, which are the small notches on the connector edge of the module.
What is DDR3 DIMM?A DDR3 DIMM (Double Data Rate 3 Dual In-Line Memory Module) is a type of RAM module used in computers and other electronic devices to store data.
DDR3 DIMMs have a single notch located near the center of the module's bottom edge, which is used to differentiate it from other types of memory modules like DDR2 and DDR4, which have their notches in different positions.
This notch ensures compatibility with the correct motherboard slot and prevents incorrect installation. The DDR3 DIMM's increased speed and efficiency compared to its predecessors make it a popular choice for modern computer systems.
Learn more about DDR3 DIMM at
https://brainly.com/question/31567299
#SPJ11
How is an X-ray burst (in an X-ray binary system) similar to a nova?
Both result in the complete destruction of their host stars.
Both are thought to involve fusion of hydrogen into helium.
Both typically recur every few hours to every few days.
Both involve explosions on the surface of a stellar corpse.
While both events involve nuclear fusion reactions, they occur in different types of binary star systems and have different mechanisms for producing the observed phenomena.
None of the options provided is entirely correct. An X-ray burst in an X-ray binary system and a nova are both types of astronomical events, but they are not similar in all the ways listed. An X-ray burst is a sudden, intense burst of X-ray radiation that occurs in some X-ray binary star systems. These systems consist of a neutron star or a black hole in close orbit with a companion star. The X-ray burst is thought to occur when matter from the companion star accumulates on the surface of the neutron star and undergoes a runaway nuclear fusion reaction, resulting in the emission of a burst of X-rays. A nova, on the other hand, is a sudden, temporary brightening of a star that occurs in a binary star system consisting of a white dwarf and a companion star. In a nova, material from the companion star falls onto the surface of the white dwarf, causing a nuclear fusion reaction that releases a large amount of energy and produces a sudden increase in brightness.
Learn more about fusion reactions here:
https://brainly.com/question/31461203
#SPJ11
The minimum clearance of service conductors which are installed as open conductors, from windows, doors, porches, fire escapes and similar locations is ______ feet.
230.9(a)
The National Electrical Code (NEC) 2021 edition states that service wires installed as open conductors must have a minimum of 3 feet of clearance from windows, doors, porches, fire escapes, and other places like these. The NEC's section 230.9(A) contains this criterion.
A structure or facility receives electricity from the distribution system of the electric utility company through service conductors. They are in charge of supplying the electrical energy to the main service disconnect of the building or facility and normally run overhead or beneath. The National Electrical Code (NEC) criteria and the estimated load of the building are used to size the wires. The NEC regulations must be followed when installing and maintaining service wires.
Learn more about service conductors here:
https://brainly.com/question/15850974
#SPJ11
(362-10(6) Electrical nonmetallic tubing and fittings shall be permitted to be _____ in a concrete slab on grade where the tubing is placed upon sand or approved screenings.
Answer: Electrical nonmetallic tubing, also known as ENT, is a type of conduit that is used to protect and route electrical wiring in residential and commercial buildings. It is made of a plastic material that is lightweight, flexible, and easy to install. When it comes to installing ENT in a concrete slab on grade, there are specific requirements that must be followed to ensure safety and compliance with building codes.
Explanation:
According to section 362-10(6) of the National Electrical Code, ENT and fittings are permitted to be installed in a concrete slab on grade as long as the tubing is placed upon sand or approved screenings. This means that the tubing must be supported by a layer of sand or other approved material to prevent it from being crushed or damaged by the weight of the concrete.
When installing ENT in a concrete slab on grade, it is important to choose the right type of tubing and fittings for the job. ENT comes in different sizes and thicknesses, so it is important to choose the right size for the wiring being installed. Fittings such as couplings, elbows, and tees must also be selected carefully to ensure a proper fit and to prevent leaks.
Overall, installing electrical nonmetallic tubing in a concrete slab on grade requires careful planning and attention to detail. By following the guidelines set forth by the National Electrical Code and using high-quality tubing and fittings, electricians can ensure a safe and reliable installation that meets the needs of their clients.
Hi! I understand that you would like me to use the terms "Electrical," "tubing," and "200 words" in my response. Here is the answer to your question:
Electrical nonmetallic tubing (ENT) and fittings shall be permitted to be "encased" in a concrete slab on grade where the tubing is placed upon sand or approved screenings.
Step-by-step explanation:
1. Electrical: The term "electrical" refers to the system and components that involve the distribution and use of electricity. In this case, it specifically relates to the nonmetallic tubing and fittings used for electrical installations.
2. Tubing: In this context, "tubing" refers to the electrical nonmetallic tubing, which is a flexible conduit designed to protect and route electrical wiring within a structure. ENT is made from nonmetallic materials, such as PVC, and is often used in concrete slabs on grade.
3. Encased: The term "encased" means that the tubing and fittings are embedded or surrounded by the concrete slab, providing protection and support for the electrical system.
In summary, the code allows for electrical nonmetallic tubing and fittings to be encased within a concrete slab on grade as long as they are placed upon sand or approved screenings, ensuring proper installation and safety.
Learn more about ENT here : brainly.in/question/12742463
#SPJ11
Using public set methods provides data integrity if:
a. a. The instance variables are public.
b. b. The instance variables are private.
c. c. The methods perform validity checking.
d. d. Both b and c.
Using public set methods to access and modify instance variables that are private ensures that the data integrity of the object is maintained.
Using public set methods to access and modify instance variables that are private ensures that the data integrity of the object is maintained. This is because private instance variables cannot be accessed or modified directly from outside the class, and therefore can only be accessed or modified through the public set methods. Additionally, if the set methods perform validity checking on the data being set, this further ensures that the object's data remains consistent and valid.
Learn more about data integrity here
https://brainly.com/question/31076408
#SPJ11
Question 86
Biological safety equipment includes
a. Biosafety cabinets
b. Needles and syringes
c. Disinfecting chemicals
d. Technical manuals
Biological safety equipment includes biosafety cabinets, which provide a sterile and enclosed workspace for working with biological agents. Needles and syringes are medical tools and not specifically related to biological safety equipment. Disinfecting chemicals may be used in biological safety procedures but are not equipment. Technical manuals are informative resources but not physical equipment for safety measures.
Biosafety cabinets These are enclosed workspaces designed to provide a controlled environment for handling hazardous biological materials, such as infectious agents. They help to protect laboratory workers and prevent the release of harmful substances into the surrounding environment.Biological safety equipment refers to specialized tools and protective measures used in laboratory settings to ensure the safe handling of biological materials.
learn more about Biosafety cabinets here:
https://brainly.com/question/26248212
#SPJ11
Asphalt cement does what while hot?
When heated, asphalt cement becomes more fluid and workable, making it simple to mix with aggregates and lay as a smooth, long-lasting paving surface.
The binder of asphalt concrete, the substance typically used for road surfaces, is asphalt cement, a highly viscous liquid. Asphalt cement changes significantly in viscosity and fluidity when heated at high temperatures, often about 300-350°F (150-175°C). This makes it simple to combine it with aggregates like sand and crushed stone to produce a uniform slurry that can be applied as a continuous, smooth surface. A sturdy and long-lasting paving material that can handle high traffic and inclement weather is created as the asphalt solidifies and hardens as it cools.
learn more about asphalt cement here:
https://brainly.com/question/19539038
#SPJ11