The junction between two neurones is called a __________. What one word completes the sentence? please can you fill in the missing gap

No. We cannot crystalline one enantiometer of mandolin acid from a racemic mixture without preparing a disatereomeric salt because enantiomers have the same solubility in achiral solvents, one enantiomer can not be selectively crystallized from the solution.

What is crystallization?

A supersaturated solution nucleates the solute in the process of crystallization, which is a technique for turning a solution into a solid under the control of chemical equilibrium. The result is the formation of uniform particles with well defined morphologies that easily dissolve again. Crystals are frequently fragile.

Precipitation from a solution, freezing, and, less frequently, direct deposition from a gas are a few processes that can result in the formation of crystals.

Hence, it cannot be crystallized.

To learn more about crystallization, click:
https://brainly.com/question/4155452

#SPJ4

Answer-

The law of conservation of mass says that matter is not created or destroyed in a closed system. That means if we have a chemical reaction, the amount of each element must be the same in the starting materials and the products.

Hope it makes sense!

According to the Bronsted-Lowry concept, acids are proton donors and bases are proton acceptors. In this reaction, NH3 gains protons and H2O loses protons. NH3 is therefore a Bronsted-Lowry base.

NH3   +   H2O    ⇒   NH4+                            + OH-

Base       Acid       Conjugate acid       Conjugate base

A basic solution is formed when ammonia dissolves in water. A small amount of dissolved ammonia reacts with water to form ammonium hydroxide which dissociates into ammonium and hydroxide ions. All these processes are reversible. Hydrogen bonds are weak bonds that are easily broken to form H+ and OH ions. This reaction also has multiple reactants, but only one product.

Learn more about Substance classified here:-https://brainly.com/question/487243

#SPJ1

Answer:

gases have no definite volume and shape

The best way to dry a liquid with a drying agent is to add it in small batches and observe the solution between each addition. It is also very helpful to swirl the mixture after each batch.

The ideal drying process involves using the least amount of drying agent possible. If too much of the reagent is used, a certain amount of the liquid being dried will be lost as it is adsorbed on the surface of the drying agent. The swirling in between each batch serves to check if enough of it has been added. The drying agent clumps together when it absorbs water, so when all the water has been absorbed, it will swirl free as a powder.

You can learn more about drying agents here:
brainly.com/question/21119355

#SPJ4

21.0 g of hydrogen is mixed with 7.0 g of nitrogen then the maximum mass of ammonia that can be produced from this reaction is 8.51gram.

Limiting agent is reactant in a reaction which is in smallest amount, that is totally consumed when a chemical reaction is completed

The balanced reaction is

[tex]N_{2}+3H_{2}\rightleftharpoons 2NH_{3}[/tex]

moles of nitrogen= 7.0÷28=0.25

moles of hydrogen=21.0÷2.016=10.41

To know the limiting reagent we have to divide moles by stoichiometry

0.25÷1=0.25

10.41÷3=3.47

0.25 is lesser than 3.47 so Nitrogen is limiting reagent so reaction will run according this only

1 Moles of nitrogen=2 mole of ammonia

0.25 mole of nitrogen = 2×0.25=0.5 mole of ammonia

mass of ammonia= 0.5mole×Molar mass of ammonia

                             = 0.5×17.031

                                =8.51g

Thus the mass of ammonia formed is 8.51g

TO know more about limiting reagent, here:

https://brainly.com/question/26905271

#SPJ1

According to the given statement chemical reactions occur when atoms are rearranged in different combinations

The correct option is C.

The fact that Dalton's atomic theory does not break a number of fundamental rules of chemical combination, including the law of definite proportions, the law of multiple proportions, and the law of conservation of mass, is one of its most significant advantages.

To know more about Dalton's atomic theory visit:

https://brainly.com/question/11855975

#SPJ13

The reaction where electrons are removed from carbon initially present in glucose is the formation of Glyceraldehyde-3-phosphate and Dihydroxyacetone phosphate.

Glycolysis is the process of the formation of glucose into 2 molecules of pyruvate. It is a cellular process, the molecule reduces in carbon number to form pyruvate thus electrons are removed in the fourth step of glycolysis. The reaction is:

Fructose-6-phosphate(6 carbon) →→→ Glyceraldehyde-3- phosphate(3 carbon) +  Dihydroxyacetone phosphate (3 carbon)

This reaction occurs in the presence of the enzyme Fructose bisphosphate aldolase. The reaction generates a reduced electron carrier NAD⁺

Dihydroxyacetone phosphate further reverses into glyceraldehyde-3-phosphate, thus leading to the formation of 2 molecules of pyruvate(a 3-carbon molecule).

Learn more about glycolysis here https://brainly.com/question/737320

#SPJ4

The central atom of the molecule has three electrons on its valence shell.

The valance shell electron pair repulsion theory shows us the number of electron pairs that can be found on the valance shell of the central atom of the molecule. Recall that the shape  of the molecule is determined by the number of electron pairs that can be found on the valance shell of the central atom of the molecule.

Hence, given the fact that the  molecule contains 3 atoms. It has 1 triple bond and 1 single bond, we can be able to conclude that the molecule has three electron pairs on its valance shell.

Learn more about valence shell:https://brainly.com/question/7871741

#SPJ1

The concentration of the acetic acid before titration is 0.1283m

25 ml CH_3 COOH  titrated with [tex]$0.1067 \mathrm{~m}$[/tex][tex]$\mathrm{NaOH}$[/tex] of [tex]$30.07 \mathrm{ml}$[/tex] where solution change colour, meany Equivalence point occurs. where

[tex]$$n_{\text {acid }}=n_{\text {base }}$$[/tex]

[tex]$\Rightarrow m_{\text {acid }} v_{\text {acid }}=m_{\text {base }} v_{\text {base}$[/tex]

[tex]$\left[\mathrm{CH}_3COO\mathrm{H}\right]=\frac{\left[\mathrm{NaOH}\right] \times V_{\mathrm{NaOH}}}{\mathrm{V}_{\mathrm{CHOOH}}}$[/tex]

[tex]$=\frac{(0.1067 \mathrm{~m}) \times(30.07 \mathrm{~ml})}{(25 \mathrm{ml})}$[/tex]

[tex]$=\frac{3.20847}{25} \mathrm{~m}$[/tex]

[tex]$=0.1283 \mathrm{~m}$[/tex]

Acetic acid, which has the molecular formula CH3COOH, is also referred to as ethanoic acid, ethylic acid, vinegar acid, and methane carboxylic acid. As a byproduct of fermentation, acetic acid gives vinegar its distinctive smell. About 4-6% of the acetic acid in vinegar is water.

To learn more about Acetic acid visit:https://brainly.com/question/15202177

#SPJ4

The solubility in moles/liter for aluminum hydroxide at 25 degrees Celcius is  2.47×109 M

What is solubility?

The maximum amount of a substance that can be dissolved in a given volume of a solvent at a particular temperature is referred to as the substance's solubility. The solubility of a given solute-solvent combination is a quality that is unique to that combination; yet, the solubility of individual compounds can vary substantially.

Given that,

Temperature= 25 degrees Celcius

Ksp value= 1.0 X 10^-33

Al(OH)3(s) ==> Al3+(aq) + 3OH-(aq)

Ksp = [Al3+][OH-]3

Let x = [Al3+], then [OH-] = 3x

1.3x10-33 = (x)(3x)3

1.3x10-33 = 27x4

x4 = 4.8x10-35

x = 2.5X10-9 M = molar solubility of Al(OH)3

Hence, the answer rounded off to one decimal point since in decimal part .466 digits in 2nd and 3rd place (66) and greater than 50. the previous digit is converted to the next digit (4-5) Even if you want to give the answer up to two decimal points then the digit in 3rd place (6) is greater than (5) so the digit in 2nd decimal place converts to (67) the answer will be 2.47×109.

To learn more about the solubility the link is given below:

https://brainly.com/question/15891599?

#SPJ4

The correct answer of chemical reaction is option (C) an odor is produced by burning a sugar.

An odor is produced by burning a sugar is a statement which indicates that a chemical reaction has taken place.

A chemical reaction is a manner that leads to the chemical transformation of 1 set of chemical substances to some other. A chemical reaction is a technique in which one or extra materials, also called reactants, are converted to 1 or greater special materials, known as merchandise. substances are both chemical factors or compounds.

A chemical reaction is a system in which reactants react chemically and convert into merchandise by chemical transformation. as an example, breathing we inhale oxygen which reacts with glucose and produces carbon dioxide, water and energy.

Learn more about chemical reaction here:- https://brainly.com/question/11231920

#SPJ1

The amount of water vapor in the atmosphere is measured as blank humidity whereas blank relative humidity is the ratio of the amount of water vapor to the maximum amount of water vapor that can be held by an air mass.

Solar energy is absorbed and stored as latent heat, which is then transported to higher latitudes and released as the water cools and changes phase. any gas that absorbs infrared radiation (net heat energy) emitted from the Earth's surface and reradiates it back to the Earth's surface, thereby contributing to the greenhouse effect The most significant greenhouse gases are carbon dioxide, methane, and water vapour. Water vapor is the most abundant greenhouse gas on Earth. It is responsible for roughly half of the greenhouse effect, which occurs when gases in the Earth's atmosphere trap the Sun's heat. Greenhouse gases enable us to live on our planet.

Learn more about water vapor here-

https://brainly.com/question/11194381

#SPJ4

The ideas on atoms proposed by Dalton constitute a theory, while the ideas proposed by Democritus do not because Democritus' theories did not explain chemical behavior and were not supported by experimental findings.

Dalton's theories were scientifically based and did explain chemical behavior; his tests revealed that the ratios in which elements were mixed were whole numbers. Democritus' theories were in line with later scientific theories, but they did not account for chemical activity. Democritus' method was not based on science, so it also lacked experimental support.

 According to the first section of Dalton's theory, all matter is composed of indivisible atoms. According to the second component of the theory, the mass and characteristics of every atom in a specific element are the same. Compounds, according to the third section, are combinations of two or more different kinds of atoms.

Learn to know more about atoms on

https://brainly.com/question/900457

#SPJ1

Answer:

models 1,2,3,4

hope it helps

The shortest wavelength emitted from the initial configuration of 6 d1 is 327 nm. Here the first energy level is 6 and the last level is infinity.

Wavelength is of a radiation is the distance travelled by a wave. As the wavelength of a wave gets smaller its energy increases.

The relation between wavelength and energy levels is given below:

[tex]\frac{1}{\lambda } = R [\frac{1}{n_{1}^{2}}-\frac{1}{n_{2}^{2}}][/tex]

here, R is a constant equal to 1.1 × 10⁷ and n₁ and n₂ are two energy level.

The smallest wavelength of light emitted from hydrogen with n₁ =6 and n₂ = ∞ can be calculated as follows:

[tex]\frac{1}{\lambda } = 1.1\times 10^{7} [\frac{1}{6^{2}}-\frac{1}{\infty ^{2}}] =30.5\times 10^{5} cm[/tex]

[tex]\lambda = \frac{1}{30.5\times 10^{5}}= 327 \textup{ nm}[/tex]

Hence, wavelength of the light emitted is 327 nm.

To find more about wavelength, refer the link below:

https://brainly.com/question/4112024

#SPJ1

Answer:Atomic radius gets bigger

Explanation:

Atomic radius bigger because not only do the atoms have more and more protons and neutrons, and thus more mass in general, there is also stronger shielding affect. Shielding affect is when electrons closer to the nucleus block the positive charge from reaching electrons farther from the nucleus, and thus those far electrons are not drawn towards the nucleus as strongly, and spread out more, increasing atomic radius.

Atomic level to explain these differences and similarities are existing or occurring within an atom or atoms

Atomic level is the when photon are incident in the new medium and they are absorbed by the atom or electron and then remitted or converted to internal energy and here firework are colorful and neon are orange and when the electron run to lower energy level then they emit colored light and the neon never run out electrical energy is the sole resource that is consumed

Know more about fireworks

https://brainly.com/question/18327624

#SPJ1

To neutralize hydrochloric acid (HCl, strong acid), students should Titrate a strong base into the strong acid.

HCL or hydrochloride acid is strong acid found in the digestive system of animals and humans , this acid in gut helps in break down of protein and absorb essential nutrients, and it helps to control viruses and bacteria that might infect the stomach. It is formed when hydrochloride gas mixes with the water.

A strong acid like HCL can be neutralize with a help of strong base like sodium hydroxide (NaOH). The reaction between sodium hydroxide (NaOH) and hydrochloric acid (HCl) is a neutralization reaction which results in the formation of a salt, sodium chloride (NaCl), and water (H2O).

To learn more about hydrochloride acid click here,

https://brainly.com/question/15806247

#SPJ1

Answer:

Unbalanced forces affect motion of objects by causing them to accelerate, decelerate or change direction.

Frequency of light that will create photoelectrons with a KE of 1.88 eV is 1.54 × [tex]10^{15}[/tex].

The frequency of a repeating event is the number of occurrences per unit of time. It is also known as temporal frequency to distinguish it from spatial frequency and ordinary frequency to distinguish it from angular frequency.

Frequency is defined as the number of waves that pass through a fixed point in one unit of time; it is also defined as the number of cycles or vibrations that a body in periodic motion goes through in one unit of time. The number of periods or cycles per second is defined as frequency. The hertz is the SI frequency unit (Hz). A hertz is one cycle per second.

Kinetic energy of photoelectrons = Planks constant × frequency - work function

KE =  h ×f - Ф (h = planks constant = 6.62610 × [tex]10^{-34}[/tex]

1.88 + Ф = h × f

1.88 + 4.50 = h × f

f = 1.54 × [tex]10^{15}[/tex]

To learn more about frequency , refer

https://brainly.com/question/1408276

#SPJ13

Answer:

It will not change, even if you still heat it.

Explanation:

The temperature of the ideal gas that must be heated to maintain the pressure is 703.61 K.

We need to know about the ideal gas theory to solve this problem. The ideal gas is assumed that there is no interaction between particles in a gas. It can be determined by the equation

P . V = n . R . T

where P is pressure, V is volume, n is the number of moles gas, R is the ideal gas constant (8.31 J/mol.K) and T is temperature.

From the question above, we know that

The initial condition of the sample is

V1 = 268 cm³

T1 = 18⁰ C = 291 K

P1 = 748 torr

V2 = 648 cm³

P2 = 748 torr

When the initial and final pressure is the same, we can use the ratio of temperature and volume as

V1/T1 = V2/T2

268 / 291 = 648 / T2

T2 = 703.61 K

Find more on ideal gas at: https://brainly.com/question/25290815

#SPJ4

Water has a 1 g/cm3 density. Weight of water in grammes when a bottle is completely filled with that amount of water.

Density bottle volume:

The empty density bottle weighs M1 = 4 kg.

Bottle weight plus water equals 12.5 kg Bottle weight plus water equals 12.5 kg Mass of water filling the density container to the top equals M2 — M1 (12.5—4=8.5 kg).

However, 1 g of water has a volume of 1 cc.

∴ water volume equals 8.5 cubic centimetres, or 8.5 ml, in a density bottle.

Define density.

The ratio between a substance's mass and volume is referred to as its density.

Volume/Mass = Density

The substance's mass per unit of volume is known as its density (volumetric mass density or specific mass). Although the Latin letter D may also be used, the sign most frequently used for density is (the lower case Greek letter rho). Mass divided by volume is the definition of density in mathematics: where is the density, m is the mass, and V is the volume.

To learn more about Mass of an empty bottle, visit

https://brainly.com/question/28005600

#SPJ13

Let's count the moles of gaseous oxygen first. Using n= m/M

=n(O)= 32.00/2×15.99)mol

= n(O)= (32.00/31.98) mol

=n(O)= 1.00mol

Let's now change every relevant value in the equation PV=nRT.

=P× 20.0L= 1.00mol× 0.0821[tex]L atm mol^{-1} K^{-1}[/tex]× 303.15K

= P× 20.0= 1.00× 0.0821atm× 303.15

[tex]P=(0.0821*300/20) atm[/tex]

P= 1.24atm

Therefore, 1.24 atm is the pressure that the oxygen gas is exerting.

The ideal gas equation is what.

The macroscopic characteristics of ideal gases are related by the ideal gas law (PV = nRT). A gas is said to be ideal if its particles don't interact with one another and don't occupy any space.

For more information about enthalpy change, visit-

https://brainly.com/question/14239793

#SPJ4

Using the specific heat capacities of water and ice, and taking into account the latent heat of melting for ice, we can calculate that the final temperature of the mixture will be 17.6 °C.

The negative value of the amount of heat lost by liquid water is equal to the amount of heat absorbed by the ice. The equation for calculating the amount of heat needed to change the temperature of a material looks like this:

Q = (t₂ - t₁) * c * m

t₂ - final temperature

t₁ - starting temperature (32.1 °C for water, -20.0 °C for ice)

c - specific heat capacity (4.186 J/g°C for water, 2.108 J/g°C for ice)

m - the mass of the material (325 for water, 44.0 for ice)

In addition, we have to take into account that some of the heat released by water is expended on melting the ice:

heat used for melting = m * l = 44.0 g * 334 J/g = 14696 J

l = latent heat of melting ice

This means that the heat released by water is expended on heating ice to 0°C, then melting that ice, then heating the ice water to the final temperature.

Heat expended by water:

Q = (32.1 °C - X) * 325 g * 4.186 J/g°C = 43670.445 J - 1360.45 J/°C * X

Heat absorbed by ice and ice water:

Q = 20.0 °C * 44.0 g * 2.108 J/g°C + 14696 J + X * 44.0 g * 4.186 J/g°C = 16551.04 J + 184.184 J/°C * X

These amounts of heat are equal:

43670.445 J - 1360.45 J/°C * X = 16551.04 J + 184.184 J/°C * X

27119.405 J = 1544.634 J/°C * X

X = 27119.405 J / 1544.634 J/°C = 17.6 °C

You can learn more about specific heat capacity here:

brainly.com/question/28302909

#SPJ4

The marginal density function of X and Y is 1 and thus they are probability density functions and the probability of the conditions in (c) and (d) is 0.2 and 0.8 respectively.

A probability is a number that expresses the likelihood or chance that a given event will occur. Probabilities can be stated as proportions ranging from 0 to 1, as well as percentages ranging from 0% to 100%.

A probability density function, also known as the density of a continuous random variable in probability theory, is a function whose value at each given sample in the sample space may be read as offering a relative likelihood that the random variable's value will be near to that sample. Probability density functions are statistical measures that are used to predict the outcome of a discrete value. The probability density function is nonnegative all the way through, and the area under the entire curve is equal to one.

a) The marginal density of X is

[tex]f_X (x) = \int\limits^x_0 {f_{X,Y} (x,y)} \, dx = \int\limits^x_0 {2} \, dx = 2x[/tex]

If it is a pdf, then

[tex]\int\limits^1_0 {f_X(x)} \, dx = 1[/tex]

[tex]\int\limits^1_0 {2x} \, dx = x^2 |_0^1 = 1[/tex]

Since integral is 1, marginal density function of X is pdf.

b) The marginal density of Y is

[tex]f_Y (y) = \int\limits^y0 {f_{X,Y} (x,y)} \, dy = \int\limits^y_0 {2} \, dy = 2y[/tex]

If it is a pdf, then

[tex]\int\limits^1_0 {f_Y(y)} \, dy = 1[/tex]

[tex]\int\limits^1_0 {2y} \, dy = y^2 |_0^1 = 1[/tex]

Since integral is 1, marginal density function of Y is pdf.

c)

       [tex]P (x < 0.2,y > 0.5) = \int\limits^1_{0.5}\int\limits^{0.2}_0 {f_{X,Y} (x,y) \, dx \, dy = \int\limits^1_{0.5}\int\limits^{0.2}_0 2dxdy[/tex]

       [tex]= \int\limits^1_{0.5} [2x]_0^{0.2}dy = 0.4[y]_{0.5}^1 = 0.4 (1 - 0.5) = 0.2[/tex]

d)

      [tex]P (x < 0.8,y > 0.5) = \int\limits^1_{0.5}\int\limits^{0.8}_0 {f_{X,Y} (x,y) \, dx \, dy = \int\limits^1_{0.5}\int\limits^{0.8}_0 2dxdy[/tex]

      [tex]= \int\limits^1_{0.5} [2x]_0^{0.8}dy = 1.6[y]_{0.5}^1 = 1.6 (1 - 0.5) = 0.8[/tex]

The complete question is:

A chemical system that results from a chemical reaction has two important components in a blend among others. The joint distribution that describes the proportion X and Y of these two components is given by f(x,y) = 2 for 0 < x < y < 1 and f(x,y) = 0 otherwise. (a) Find the marginal density function of X and verify if it is a pdf. (b) Find the marginal density function of Y and verify if it is a pdf. (c) Find the probability that the component proportions produce results X < 0.2, Y > 0.5. (d) Find the probability that the component proportions produce results X < 0.8, Y > 0.5.

Learn more about Probability density functions here:

https://brainly.com/question/14410995

#SPJ4

Answer:

the periodic table

Explanation:

Elements with similar properties are in columns called groups. Elements to the left of this line are metals. Elements in the same group of the periodic table have the same number of electrons in their outer shell. This gives them similar chemical properties.

Hope this helps!