The given statement "the instantaneous contacts of a timer do not have a time-delay period associated with them" is TRUE because they make or break the circuit as soon as the timer reaches a certain point in time.
What's instantaneous contacts?Instantaneous contacts are designed to change their state immediately when the timer coil is energized or de-energized, providing a direct and immediate response to the control signal.
In contrast, time-delay contacts are specifically designed to introduce a delay between the activation or deactivation of the timer coil and the change in state of the contacts, providing a controlled and adjustable time interval for specific applications.
In summary, instantaneous contacts offer a quick response with no time-delay, while time-delay contacts are used for applications requiring a specific time period before changing their state.
Learn more about time delay at
https://brainly.com/question/28319426
#SPJ11
How does decreasing quantum affect throughput?
Decreasing quantum can affect throughput by reducing the amount of time allocated to each process before a context switch occurs. This can lead to more frequent context switches, which can cause overhead and potentially decrease overall efficiency.
The following ways in which it affects is :
1. Decrease quantum size: Quantum size, also known as time slice or time quantum, is the amount of time allocated for each process to execute in a round-robin scheduling algorithm.
2. More context switches: When you decrease the quantum size, it leads to more context switches. The context switch occurs when the system switches from executing one process to another. This is because each process gets a smaller time slice to execute before it is preempted by another process.
3. Increased overhead: More context switches result in increased overhead, as the system spends more time switching between processes rather than executing them.
4. Reduced throughput: Throughput, which is the number of tasks completed per unit of time, gets affected negatively in this scenario. The overall efficiency and throughout of the system decrease due to the increased overhead caused by frequent context switches.
In summary, decreasing quantum size can negatively affect throughput by causing more context switches and increased overhead, ultimately reducing the efficiency of the system.
Learn more on Quantum Affect here : brainly.in/question/52916686
#SPJ11
What size conductor is required for a 104 ampere continuous load that is protected with a 150 ampere breaker?
To determine the appropriate conductor size for a 104 ampere continuous load that is protected with a 150 ampere breaker, you should refer to the National Electrical Code (NEC) Table 310.15(B)(16).
Based on this table, a conductor with a size of 2 AWG (American Wire Gauge) would be suitable for your requirements, as it has an ampacity of 130 amps, which safely accommodates the 104 ampere continuous load and is protected by the 150 ampere breaker.In order for current to flow within a closed electrical circuit, it is not necessary for one charged particle to travel from the component producing the current (the current source) to those consuming it (the loads). Instead, the charged particle simply needs to nudge its neighbor a finite amount, who will nudge its neighbor, and on and on until a particle is nudged into the consumer, thus powering it. Essentially what is occurring is a long chain of momentum transfer between mobile charge carriers; the Drude model of conduction describes this process more rigorously. This momentum transfer model makes metal an ideal choice for a conductor; metals, characteristically, possess a delocalized sea of electrons which gives the electrons enough mobility to collide and thus affect a momentum transfer.
learn more about conductor here:
https://brainly.com/question/8426444
#SPJ11
Continuous Load Protection: Overcurrent protections devices are sized at no less than ____ percent of the continuous load, plus _____ percent of the noncontinuous load.
Continuous Load Protection: Overcurrent protection devices are sized at no less than 125% of the continuous load, plus 100% of the non continuous load. This ensures that the protection devices can handle both the sustained current of the continuous load and the occasional spikes of the non continuous load without tripping unnecessarily.
Verbs that we rarely employ with continuous tenses are considered non-continuous verbs. These "stative" verbs cannot convey the continuous or progressive aspect since they are about the state, not action. The most prevalent non-continuous verbs are listed below: feelings of dislike, love, preference, want and wish.
Stative verbs are verbs that aren't used in the present continuous, so we don't use them with this tense.
Learn more about non continuous here
https://brainly.com/question/29331062
#SPJ11
Circuit breakers used as switches in a florescent lighting circuit shall be listed, shall be marked SWD+HID and with a maximum of ___________.
240.83(d)
Circuit breakers play an important role in ensuring the safe operation of electrical systems, particularly in fluorescent lighting circuits. As per the National Electrical Code (NEC) section 240.83(d).
Circuit breakers that act as switches in circuits for fluorescent lighting must adhere to particular specifications.
First, these circuit breakers need to be listed, which implies an accredited agency like Underwriters Laboratories (UL) has evaluated and approved them.
Second, "SWD+HID" must be written on the circuit breaker. The abbreviation "SWD" denotes "Switching Duty," indicating that the breaker was created primarily for switching purposes. HID, which stands for "High-Intensity Discharge," refers to the kind of lighting that is frequently used in commercial and industrial environments, such as metal halide or high-pressure sodium lamps.
Section 450.3 of the NEC specifies rules for the protection of transformers and related equipment, with the ultimate objective of guaranteeing safety and reducing the possibility of electrical dangers.
Learn more about National Electrical Code (NEC) here
https://brainly.com/question/30757813
#SPJ11
List VSEO (Video Search Engine Optimization) Components
VSEO (Video Search Engine Optimization) include: Video title, Video description, Video tags, Video transcript, Video sitemap, Video thumbnail, Video length, Viewer engagement and Viewer engagement.
VSEO (Video Search Engine Optimization) include:
1. Video title: The title should be descriptive, relevant, and include target keywords to help viewers understand the content and improve search rankings.
2. Video description: The description should provide a brief summary of the video content, including important keywords and phrases. This helps search engines index the video and show it in relevant search results.
3. Video tags: Tags are keywords that describe the video and help search engines understand the context. Choose relevant tags to improve visibility in search results.
4. Video transcript: Including a transcript (closed captions) can improve accessibility for users and help search engines understand the video's content.
5. Video sitemap: Submitting a video sitemap to search engines helps them index your video content and display it in search results.
6. Video thumbnail: An eye-catching thumbnail can attract viewers' attention and increase click-through rates.
7. Video length: Aim for an optimal video length based on your target audience and the purpose of the video, as this can impact viewer engagement and search rankings.
8. Viewer engagement: Encourage likes, comments, and shares to increase the video's visibility and improve its search rankings.
Know more about the Search Engine Optimization
https://brainly.com/question/20512550
#SPJ11
A terminal that allows a server to enter guest orders but not settle guest accounts is called a __________ terminal.
A. cashier
B. precheck
C. "smart card"
D. self-service
A terminal that allows a server to enter guest orders but not settle guest accounts is called a A. cashier terminal. Other types of terminals that may be used in hospitality settings include precheck terminals.
A terminal is a device or computer that allows a user to access a server or network. In the context of hospitality or restaurants, a terminal can be used by servers to input guest orders into a point-of-sale (POS) system, which is typically managed by a server.
In this scenario, the terminal is restricted to only allowing servers to enter guest orders and is not authorized to settle guest accounts. This is known as a "cashier" terminal, as it is only used for inputting orders and not handling payments or cash transactions.
Other types of terminals that may be used in hospitality settings include precheck terminals, which allow guests to view menus and place orders before being seated, and self-service terminals, which allow guests to place orders and pay without assistance from a server.
Learn more about point-of-sale (POS) system here:
brainly.com/question/28198761
#SPJ11
"A terminal that allows a server to enter guest orders but not settle guest accounts is called a __________ terminal."
Your answer: A terminal that allows a server to enter guest orders but not settle guest accounts is called a B. precheck terminal.
Learn more about guest orders: https://brainly.com/question/1094377
#SPJ11
A 1 m3 isolated chamber with rigid walls is divided into two compartments of equal
volume. The partition permits transfer of heat. One side contains a nonideal gas at 5 MPa and 300 K and the other side contains a perfect vacuum. The partition is ruptured, and after sufficient time for the system to reach equilibrium, the temperature and pressure are uniform throughout the system. The objective of the problem statements below is to find the final T and P. The gas follows the equation of state
PV/RT = 1+ (b - a/T)P/RT
where b = 20 cm3/mole; a = 40,000 cm3K/mole; and CP = 41.84 + 0.084T(K) J/mol
K.
a. Set up and simplify the energy balance and entropy balance for this problem. b. Derive formulas for the departure functions required to solve the problem. b. Determine the final P and T.
The objective is to find the final temperature and pressure of a nonideal gas in an isolated chamber with a partition. The steps to solve it involve setting up and simplifying energy and entropy balances.
What is the objective of the problem statement and what are the steps to solve it?The problem involves an isolated chamber with two compartments divided by a partition that allows the transfer of heat. One compartment contains a non-ideal gas while the other is a perfect vacuum.
After the partition is ruptured, the system is allowed to reach equilibrium, and the final temperature and pressure need to be determined. To solve the problem, energy balance and entropy balance equations are set up and simplified.
Departure functions are then derived to find the final pressure and temperature. The gas follows a particular equation of state, PV/RT = 1+ (b - a/T)P/RT, where b, a, and CP are given constants.
Finally, the final pressure and temperature of the system are determined using the derived formulas for the departure functions.
Learn more about objective
brainly.com/question/14964361
#SPJ11
The source document states:
(x) The exercise will last nine days.
The new document states:
(x) The exercise will consist of four days of preparation and the remaining five days will consist of execution of plans.
What concept is used to derivatively classify the new document?
The concept used to derivatively classify the new document is called "aggregation."
Aggregation is the process of combining several related pieces of information into one larger piece of information, without changing the overall meaning or content of the information.
The new document is derived from the source document by aggregating the information about the duration of the exercise.
The original document stated that the exercise would last for nine days, while the new document breaks this down into four days of preparation and five days of execution.
By doing this, the new document is able to provide more specific and detailed information about the exercise, while still accurately reflecting the information in the source document.
Aggregation is a common technique used in document classification, as it allows for the creation of more specific and detailed documents without the need for additional information or data.
By aggregating related information, documents can be created that are more targeted and useful for specific purposes or audiences.
Additionally, aggregation can help to reduce the amount of redundant or repetitive information in documents, making them easier to read and understand.
Overall, aggregation is a valuable tool for document classification and can be used in a variety of contexts to improve the quality and usefulness of documents.
For similar questions on Document
https://brainly.com/question/30365314
#SPJ11
If we code a produce/consumer program, which types of communication require us to implement process synchronization?
In a producer/consumer program, the types of communication that require process synchronization are shared resources or data structures, such as buffers or queues.
Step 1: The producer generates data and stores it in a shared buffer or queue. This is a form of communication between producer and consumer.
Step 2: The consumer retrieves data from the shared buffer or queue and processes it.
Step 3: Process synchronization is needed to ensure that the producer and consumer access the shared resource in a mutually exclusive manner, preventing conflicts and data inconsistency.
By implementing process synchronization, you can prevent issues such as overwriting produced data before it is consumed, or consuming data that has not been produced yet. This ensures a smooth communication and coordination between the producer and consumer processes.
Learn more about mutexes here: brainly.com/question/29991385
#SPJ11
Question 57 Marks: 1 In order to simplify cleanliness, window sills should be sloped toward the room and down at an angle of ______ degrees.Choose one answer. a. 30 b. 20 c. 80 d. 40
In order to simplify cleanliness, window sills should be sloped toward the room and down at an angle of 20 degrees.
In the context of computers, a window is a graphical user interface element that displays the content of an application or program on a computer screen. Windows typically consist of a rectangular area with a title bar, borders, and controls that allow the user to resize, minimize, or close the window. Multiple windows can be opened simultaneously, allowing the user to multitask and switch between different applications or documents. Windows can also be arranged and tiled to optimize screen real estate and improve workflow. The concept of Windows was first introduced by Microsoft with the release of Windows 1.0 in 1985 and has since become a standard feature in most modern operating systems.
Learn more about window here:
https://brainly.com/question/28525121
#SPJ11
A transitional off-to-on contact will allow logic continuity for one scan and then open, even though theTriggering signal may stay on. true/false
The given statement "A transitional off-to-on contact will allow logic continuity for one scan and then open, even though the Triggering signal may stay on." is true because a transitional off-to-on contact will allow logic continuity for one scan and then open, even though the triggering signal may stay on.
In ladder logic programming, a transitional off-to-on (TO) contact is a logic element that is used to detect a change in state from off to on of a signal. When the TO contact detects this change in state, it allows logic continuity for one scan cycle and then opens, even if the triggering signal remains on. This means that the TO contact can be used to generate a single pulse or to trigger an event based on a change in state.
For example, if a sensor detects a part on a conveyor belt and sends a signal to a PLC, a TO contact can be used to generate a single pulse to start a timer that controls the operation of a motor to move the conveyor belt. Even if the sensor continues to detect the part on the conveyor belt, the TO contact will only generate a single pulse and not continuously trigger the timer.
The use of transitional off-to-on contacts is a common technique in ladder logic programming to generate single pulses and trigger events based on changes in state.
You can learn more about Triggering signal at
https://brainly.com/question/30830338
#SPJ11
After a finally block has finished executing (and there are no exceptions to be handled), ________.a. control proceeds to the first statement after the finally block.b. control returns to the throw point.c. the application exits.d. control proceeds to the first statement after the last catch block.
After a finally block has finished executing, control proceeds to the first statement after the finally block.
The finally block is executed regardless of whether or not an exception is thrown, so this ensures that any necessary cleanup or resource release is performed. Once the finally block completes execution, control continues to the next statement in the program, which is the statement immediately after the finally block. This behavior is important to keep in mind when writing code that uses try-catch-finally blocks, as any logic that needs to be executed after the try-catch-finally block should be placed after the finally block. Additionally, if an exception is thrown within the finally block itself, it will propagate up the call stack just like any other exception, and control will not return to the try or catch blocks.
Learn more about finally block here:
https://brainly.com/question/31325777
#SPJ11
Counters are similar to timers, that except that they do not operate on an internal clock. true/false
5977 - What is the best indicator to the pilot of the load factor on the airplane?- How firmly the pilot is pressed into the seat during a maneuver- Amount of pressure required to operate the controls- Airspeed when pulling out of a descent
The best indicator to the pilot of the load factor on the airplane is how firmly the pilot is pressed into the seat during a maneuver.
This physical sensation provides immediate feedback to the pilot regarding the level of gravitational force acting on the aircraft. While the amount of pressure required to operate the controls and airspeed when pulling out of a descent are important factors, they are not as direct of an indicator of the load factor as the sensation of being pressed into the seat.
To learn more about pilot click the link below:
brainly.com/question/28710972
#SPJ11
Question 75
A stud is a unit of building construction that is intended as a:
a. Vertical support
b. Horizontal support
c. Roof only support
d. Support for sheet rock
A stud is a unit of building construction that is intended as a "vertical support". In construction, studs are vertical members that form the framework of walls and support the weight of the structure above them.
Construction is the process of building, designing, and maintaining physical structures, such as buildings, roads, bridges, and infrastructure. It involves a wide range of activities, including planning, design, site preparation, foundation work, construction, and finishing. Construction projects may vary in size and complexity, from small renovations to large-scale infrastructure projects that take years to complete. The construction industry employs a diverse range of professionals, including architects, engineers, builders, contractors, and project managers. Construction is an essential part of modern society, providing the infrastructure necessary for economic growth, social development, and quality of life. It requires careful planning and execution to ensure that structures are safe, functional, and sustainable.
Learn more about construction here:
https://brainly.com/question/29508580
#SPJ11
The objectives of a(n) _____ degree typically include how to implement and manage technology to develop, manage, and disseminate information.
a. information systems
b. information technology
c. computer science
d. computer engineering
The objectives of a(n) information systems degree typically include how to implement and manage technology to develop, manage, and disseminate information. However, computer science and computer engineering degrees may also cover these objectives to some extent, as they are both related to the development and management of technology, including computer systems.
The objectives of a(n) b. information technology degree typically include how to implement and manage technology to develop, manage, and disseminate information.
Learn more about technology here:
brainly.com/question/13044551
#SPJ11
standard and protocol to mean the same thing. (T/F)
Answer: False. While standard and protocol may be related, they do not mean the same thing. A standard is a set of guidelines or requirements that are agreed upon and followed to ensure consistency and quality. A protocol, on the other hand, is a set of rules or procedures that govern the exchange of information or data between systems or devices.
Explanation: 1. Standard: A set of rules, guidelines, or specifications that industries agree upon to ensure the compatibility and interoperability of products, services, and processes. Standards are usually established by recognized organizations or governing bodies.
2. Protocol: A specific set of rules and procedures for communication and data exchange between devices or systems. Protocols define how the data is transmitted, processed, and interpreted.
In summary, a standard defines the overall guidelines, while a protocol provides the specific rules for communication and data exchange within that standard.
Learn more about standard here: brainly.in/question/5363387
#SPJ11
A dc generator that suplies rotor current to larger alternators is called?
A DC generator that supplies rotor current to larger alternators is called an "exciter." Exciters are used to provide the initial electromagnetic field required for the alternators to produce AC voltage.
The photosystem's reaction centre, chlorophyll I transmits its excited electrons to ferrodoxin, a exciter tiny protein on the stromal side of the thylakoid membrane, via a series of carriers. Then, ferrodoxin's electrons are transferred to NADP+ by the enzyme NADP reductase, producing NADPH.
Two water molecules are the source of the four protons and four electrons. Through an electron transport chain, the excited chlorophyll electrons are moved from photosystem II's electron acceptors to photosystem I.
Photosystems, the functional elements of photosynthesis, are recognised by particular pigment association and organisation patterns. Light energy is absorbed and transferred by photosystems, which also involves the transport of electrons. Photosystems are physically present in the thylakoid membranes.
Learn more about exciter here
https://brainly.com/question/28259864
In which default order will a router search for startup configuration information?
A router will search for startup configuration information in the following default order:
1. NVRAM (Non-Volatile Random Access Memory) - This is where the router stores its startup configuration by default.
2. TFTP (Trivial File Transfer Protocol) server - If the router is configured to look for a startup configuration on a TFTP server, it will check there next.
3. ROM (Read-Only Memory) - If the router cannot find a startup configuration in NVRAM or on a TFTP server, it will look for a default configuration in its ROM.
4. Setup mode - If no startup configuration is found in any of the above locations, the router will enter setup mode, where an administrator can manually configure the router.
A router will search for startup configuration information in the following default order:
1. NVRAM (Non-Volatile Random Access Memory)
2. TFTP (Trivial File Transfer Protocol) server
First, the router checks NVRAM for the saved startup configuration file. If it doesn't find one, it proceeds to search for a configuration file on a TFTP server, which is specified by the router's configuration register settings.
Learn more about configuration here
https://brainly.in/question/9181604
#SPJ11
can you solve this question pls i cant solve
Note that no drug will precipitate from the solution upon cooling it to 40°C.
What is the explanation for the above response?Amount of drug in saturated solution at 80°C = 1000 g
Solubility of drug at 80°C = 2.5 g B 100-1 g-1 water
Therefore, the amount of water present in the solution at 80°C = 1000 g / (2.5 g B 100-1 g-1 water) = 40000 g
Amount of drug in saturated solution at 40°C = 1000 g
Solubility of drug at 40°C = 0.36 g B 100-1 g-1 water
Therefore, the amount of water present in the solution at 40°C = 1000 g / (0.36 g B 100-1 g-1 water) = 2777.78 g
The amount of drug that will precipitate = amount of drug in initial solution - amount of drug in solution at 40°C
= 1000 g - (0.36 g B 100-1 g-1 water * 2777.78 g) = 1000 g - 1000 g = 0 g
Therefore, no drug will precipitate from the solution upon cooling it to 40°C.
Learn more about Precipitation at:
https://brainly.com/question/18109776
#SPJ1
An example of manual system that uses automated electronics is the CAC that allows users to authenticate signatures, securely log onto computer systems, and gain access into designated areas. True or False?
True. A CAC (Common Access Card) is an example of a system that uses automated electronics to enable users to authenticate signatures, securely log onto computer systems, and gain access to designated areas.
The Common Access Card, sometimes known as the CAC, is a smart card that resembles a credit card in size. It is the accepted method of identification for eligible DoD and USCG contractor workers as well as Active Duty United States Defence forces, including the Selected Reserve and National Guard, US Department of Defence (DoD) civilian employees, and US Coast Guard (USCG) civilian employees. It serves as the primary card for granting physical entry to buildings and other restricted areas, as well as access to defense-related computer networks and systems. In accordance with the Geneva Conventions, particularly the Third Geneva Convention, it also functions as an identifying card.
Learn more about computer here-
https://brainly.com/question/30669092
#SPJ11
Normally, the reset input to a timer will override the control input of the timer. true/false
True, in most cases, the reset input to a timer will override the control input of the timer. This is because the reset input is designed to immediately reset the timer's internal state, regardless of the control input status.
A timer is a device or program that measures the passage of time and can be used to control or trigger events at specific intervals. Timers are used in a wide range of applications, from cooking and exercise to industrial automation and electronic devices.
There are many types of timers, including mechanical timers, digital timers, and programmable timers. Mechanical timers use mechanical components, such as springs and gears, to measure and control time, while digital timers use electronic components, such as microprocessors and LCD displays. Programmable timers can be customized with specific time settings and are often used in industrial automation and control systems.
Timers are used in many industries, including manufacturing, healthcare, transportation, and entertainment. They can be used to trigger alarms, control machinery and equipment, and manage workflow and scheduling. Timers are essential tools for achieving precision, efficiency, and reliability in many applications.
Learn more about timer here:
https://brainly.com/question/10534421
#SPJ11
22) An example of an important physical site characteristic is a...A) Major airportB) Grid street patternC) Major central parkD) Natural harbor
An example of an important physical site characteristic is a: D) Natural harbor
What is the physical site characteristic?The physical characteristics of a place, such as its terrain, soil, vegetation, latitude, and elevation, are referred to as its "site." The circumstance is the position of one place in respect to another.
Geographers usually describe a place using both natural and human factors. The physical elements of a location that are produced by geological, hydrological, atmospheric, and biological processes make up that area's natural environment.
A natural harbor is defined as a landform where a section of a body of water is protected and deep enough to allow anchorage.
Thus, it is the only option that is an important physical characteristic as the others can't be described as physical site characteristic.
Read more about Physical Site Characteristic at: https://brainly.com/question/27265354
#SPJ1
A network administrator is making changes to the configuration of a router. After making the changes and verifying the results, the administrator issues the copy running-config startup-config command. What will happen after this command executes?
The command "copy running-config startup-config" is used to save the changes made to the running configuration of a Cisco router to its non-volatile RAM (NVRAM), which stores the startup configuration.
The command is a fundamental concept in computing that refers to a specific instruction or set of instructions that a computer program or operating system can execute. Commands are used to perform various tasks, such as launching an application, changing system settings, or performing a file operation. In the context of networking, commands are used to configure and manage networking devices, such as routers and switches. Examples of network commands include ping, traceroute, and telnet. Commands can be entered via a command line interface (CLI) or graphical user interface (GUI), and their syntax and behavior may vary depending on the operating system or application being used.
Learn more about The command here:
https://brainly.com/question/28285661
#SPJ11
What individual feat were early electricians very proud of
Early electricians were very proud of their ability to calculate and design electrical systems using only their own knowledge and expertise, without the aid of computers or sophisticated tools.
In the early days of electricity, electrical systems were designed and installed by highly skilled individuals who were known as electricians. These electricians had to have a deep understanding of electrical theory and mathematics in order to design and install electrical systems that were safe, reliable, and efficient. They had to be able to calculate the load requirements of different circuits, design wiring and distribution systems, and ensure that all components were properly installed and grounded.
Despite the challenges they faced, early electricians took great pride in their ability to design and install complex electrical systems. Their work was highly respected, and they were considered to be among the most skilled tradespeople of their time.
You can learn more about electrical systems at
https://brainly.com/question/29767796
#SPJ11
Steel or iron pipe grounding electrode shall be protected from corrosion by ______ protection.
250.53(5)(a)
According to the National Electrical Code (NEC) 2017, section 250.53(5)(a), steel or iron pipe grounding electrodes shall be protected from corrosion by a suitable corrosion protection coating and/or cathodic protection.
This means that steel or iron pipes used as grounding electrodes must be coated with a protective layer to prevent corrosion, which can weaken the pipe and impair its ability to provide a reliable electrical connection to the earth. The protective coating can be made of various materials, such as epoxy, plastic, or asphalt, and must be suitable for the specific soil conditions where the pipe will be installed.
In addition to the protective coating, cathodic protection may also be used to prevent corrosion. Cathodic protection involves using a direct electrical current to protect a metal object from corrosion by making it the cathode of an electrochemical cell. This can be accomplished by connecting a sacrificial anode, such as a magnesium or aluminum rod, to the steel or iron pipe, which will attract the corrosive current away from the pipe and onto the anode.
By protecting steel or iron pipe grounding electrodes from corrosion, the NEC aims to ensure the longevity and reliability of the grounding system, which is essential for maintaining electrical safety and equipment performance.
Learn more about electrochemical cell here:
https://brainly.com/question/12034258
#SPJ11
A lamp is to be switched off 10s after a switch has been switched from it's on to off position. The most directly applicable timer to use would be the off-delay non retentive timer. true/false
The statement" A lamp is to be switched off 10s after a switch has been switched from it's on to off position. The most directly applicable timer to use would be the off-delay non retentive timer" is True.
The off-delay timer is a type of non-retentive timer that is used to delay the turning off of a device or system after a triggering event has occurred. In this case, the triggering event is the switch being moved from the on position to the off position, and the device that needs to be turned off is the lamp.
Since we want the lamp to be switched off 10 seconds after the switch has been moved to the off position, the most directly applicable timer to use would be an off-delay non-retentive timer. This type of timer will start counting down from the moment the switch is moved to the off position, and after the preset time has elapsed (in this case, 10 seconds), it will turn off the lamp.
Learn more about timers and their applications: https://brainly.com/question/13154395
#SPJ11
The insulation on the conductors within type NM cable shall be rated at ______.
334.112
According to section 334.112 of the National Electrical Code (NEC), the insulation on the conductors within Type NM (non-metallic sheathed) cable shall be rated at a minimum of 90 degrees Celsius.
Type NM (Non-Metallic) cable, also known as Romex® cable, is a type of electrical cable used for indoor residential wiring applications. It typically consists of two or more insulated conductors, a bare or insulated ground wire, and a non-metallic outer sheath. The conductors are usually made of copper, and the outer sheath is typically made of PVC or similar material. Type NM cable is commonly used for branch circuit wiring in residential applications, such as powering lighting and receptacle circuits. It is easy to work with and install, and is designed to be used in dry locations only. In damp or wet locations, the use of moisture-resistant cables is required.
Learn more about Type NM here:
https://brainly.com/question/31566099
#SPJ11
F both wires in the twisted pair CANbus need to be repaired, it is best to:
Group of answer choices
if both wires in the twisted pair CANbus need to be repaired, it is best to replace both cables.
What is a twisted pair cable?Twisted pair cable is described as a type of wiring used for communications in which two conductors of a single circuit are twisted together for the purposes of improving electromagnetic compatibility.
We replace both cables because the twisted pairs are done so in order to cancel out interference arising dur to electromagnetism. One of the disadvantages of using Twisted pair cable is that it is unable to provide secure transmission of data and highly prone to external interference.
Learn more about Twisted pair cable at: https://brainly.com/question/13090298
#SPJ4
Recptacles installed on 15 and 20 amp branch circuits shall be on the ________ type.
406.4 (a)
Recptacles installed on 15 and 20 amp branch circuits shall be on the specific type designated for that amp rating, as specified in Section 210.21(B) of the National Electrical Code.
Therefore, receptacles on a 15-amp branch circuit shall be rated for 15 amps, and receptacles on a 20-amp branch circuit shall be rated for 20 amps.According to NEC 2017 406.4 (A), receptacles installed on 15 and 20 amp branch circuits shall be of the grounding type. This means that they should have a grounding terminal that is connected to an equipment grounding conductor of the circuit.
To learn more about circuits click the link below:
brainly.com/question/29988666
#SPJ11