The image above shows a gas held in a chamber with a fixed volume. The gas begins with a temperature 333 K and a pressure of 4.00 atm (green) that increases to 7.65 atm (orange) as the gas is heated. What is the temperature of the gas when the pressure increases to 7.65 atm?
Answers
Answer:
636.86 K
Explanation:
From the question given above, the following data were obtained:
Initial temperature (T1) = 333 K
Initial pressure (P1) = 4 atm
Final pressure (P2) = 7.65 atm
Final temperature (T2) =?
NOTE: The volume is constant.
Since the volume is constant, we can obtain the new temperature the gas by using the following formula as illustrated below:
P1 /T1 = P2 /T2
4/333 = 7.65/T2
Cross multiply
4 × T2 = 333 × 7.65
4 × T2 = 2547.45
Divide both side by 4
T2 = 2547.45 / 4
T2 = 636.86 K
Therefore, the new temperature of the gas is 636.86 K
Answer:
It's 637 <3
Explanation:
Round 636.86 to get 637, proven on CK12
Related Questions
In the ground state atoms of the elements in group 15 of the periodic table all have the same number of
Answers
Answer:
valence electrons
Explanation:
Match the terms to their definition.
1. aerobic
any chemical compound that contains carbon
2. amino acid
dependent upon oxygen to function
3. organic
the basic building block of proteins
Answers
Answer:
2
Explanation:
amino acid- the basic building block of proteins
organic- any chemical complains that contains carbon
1) Write the ionic compound formulas for the element sodium and all the elements in group 6A. Example: Sodium + Oxygen=Na2O
2) Write the ionic compound formulas for the element aluminum and all the elements in group 7A. Example: Aluminum + Fluorine=AlF3
3) Write the ionic compound formulas for the element magnesium and all the elements in group 5A. Example: Magnesium + Nitrogen=Mg3N2
Answers
Answer:
See explanation
Explanation:
1) Group 6A elements include; O, S, Se, Te, Po
Na2O, Na2S, Na2Se, Na2Te, Na2Po
2) Group 7A elements include; F, Cl, Br, I, At
AlF3, AlCl3, AlBr3, AlI3, AlAt3
3) Group 5A elements are;
N, P, As, Sb,Bi
Mg3N2, Mg3P2, Mg3As2, Mg3Sb2, Mg3Bi2
Salt water is made of water (H2O) and NaCl (salt). Which of these substances is the solute
Answers
Answer:
[tex]NaCl[/tex] (salt) is the solute
Water [tex]H_20[/tex] is the solvent
Explanation:
A solute is the substance to be dissolved in a solvent to make a solution.
Diamond cannot conduct electricity but graphite can,why
Answers
Diamond does not conduct electricity because it has no delocalized electron to conduct electricity.
How can you cause a physical change?
ill give 10 points
Answers
crushing a can
melting an ice cube
boiling water
mixing salt and water
breaking a glass
dissolving sugar and water
shredding paper
chopping wood
! !!
A portion of the periodic table is shown below:
Which element has the electron configuration 1s22s22p6?
Argon (Ar)
Chlorine (Cl)
Fluorine (F)
Neon (Ne)
Answers
Answer:
here is your answer
Explanation:
the fourth one Neon (Ne) he the configuration given above .
pls make it the brainliest !!!
Answer:
Neon (Ne)
Explanation:
2+2+6=10
What is a feed back loop?
Answers
Answer:A feedback loop is a process in which the outputs of a system are circled back and used as inputs. In business, this refers to the process of using customer or employee feedback (the outputs of a service or product), to create a better product or workplace
Explanation: Becuz ur mom
Urgent help plz!!!!!!!!!
Answers
Answer: .03 M
Explanation:
you have to use m1v1 = m2v2
but the units should be in L so we need to convert the 32.20 and 26.60 into L by dividing them by 1000. So now we have .0322 and .2660
.0322(.25)=(.2660)(x)
x = .03
i just need the last one
Answers
An element that is malleable and a good conductor of heat and electricity could have an atomic number of
Answers
Answer:
Copper (atomic number 29)
Explanation:
Copper is a element that is malleable and a good conductor of heat and electricity.
The process by which CO2 gas releases heat energy to become dry ice is called :
evaporation
freezing
deposition
sublimation
Answers
i believe its deposition
For each pair of covalently bonded atoms, choose the one expected to have the shortest bond length.(A) C-C(B) C?C...... (A,B)(C) C?O(D) C-O...... (C,D)bondlengthtitle.gif The length of a covalent bond depends upon the size of the atoms and the bond order.For each pair of covalently bonded atoms, choose the one expected to have the shortest bond length.(A) P-Cl(B) Si-Cl...... (A,B)(C) P-I(D) H-I...... (C,D)bondlengthtitle.gif The length of a covalent bond depends upon the size of the atoms and the bond order.For each pair of covalently bonded atoms, choose the one expected to have the shortest bond length.(A) Cl-I(B) I-I...... (A,B)(C) P-Br(D) P-Cl...... (C,D)
Answers
Answer:
See explanation
Explanation:
In the section A,B
C triple bond O has a higher bond energy. A triple bond is shorter and more difficult to break hence they have a higher bond energy.
For the same reason in the C,D section; C triple bond N has a higher bond energy.
In the next section, the higher the bond order the shorter the bond. Hence C triple bond C is the shortest in the A,B section while C triple bond O is the shortest in the C,D section. Both have a bond order of 3.
In the A,B section; I is larger than Br hence H-Br has the shortest bond length.
In the C,D section; Br is larger than Cl hence P-Cl has the shortest bond length.
Why does warm soda go flat faster than chilled soda?
A. Gas molecules stay dissolved in warm soda.
B. Gas molecules move slower in warm soda.
C. Gas molecules move faster in warm soda.
D. Gas molecules cannot escape in warm soda.
E. Gas molecules stay trapped with the solvent in warm soda.
Answers
Answer:
My best guess is c
Explanation:
Answer:
C for plato
Explanation:
Convert 5.00 g CaC, to moles CaC,
Answers
Write with example of any three changes in the state of matter in daily life
Answers
Answer:
just wait 3 minutes ill tell you the answer cause its in my book
Explanation:
Please help me! I would appreciate it if you can!
Answers
Answer:
meteorologist, barometers, anemometer, thermometer, balloon, satellites, station models, isotherms, isobars
Explanation:
Someone thought there was water in Beaker C. He drank some and quickly spat out.He said that it was salty. Explain why this happened.
Answers
Answer:
He assumed wrongly
Explanation:
It happened this way because the person assumed wrongly.
Most other compounds have the same physical appearance as water especially when in liquid form.
This can be a very tricky one in the laboratory. The sense of taste is not the best way to fathom what a particular compound is made up of. This is the reason why this student or person faced this sort of problem. Water has different properties that can be tested for using simple techniques in the laboratory.Calculate the density of a metal that has a mass of 100 grams and a volume of 350. mL.
Answers
Answer:
0.28571428571
Explanation:
m/v = density
A student found the mass of an object to be 5.5 g. The actual mass of the object is 5.3 g. What is the percent error in the measurement?
Answers
Answer: 3.6%
5.5 - 5.3 and divide it by 5.5. Then multiply this by 100
Explanation:
This will get you 3.6%
The percent error in the measurement is 3.774%
How do you calculate the percent error?
Subtract one cost from the other: 2.sixty eight - 2.70 = -zero.02.relying on what you need, you may discard any poor sign (take the absolute value): 0.02. that is the mistake.Divide the mistake by using the proper cost:zero.02/2.70 = zero.0074074.Multiply this fee by 100% to attain the percentage of mistakes:What's an example of a percent error?
For an instance, let's assume you guessed that there have been 230 gumballs within the picture, however, there were simply 311 gumballs. The distinction between your wager (230) and the actual wide variety (311) in the evaluation of the actual variety (311) expressed as a percentage is the percentage error.
Learn more about percent error at https://brainly.com/question/1600371
#SPJ2
when solid has a mass of 15.0 g and volume of 12.4 mL, what is the density?
Answers
The actual decimal was 1.0967742
true or false
the mass of an object changes when it goes through a physical or chemical change
Answers
Answer:
True.
But it only changes in physical change.
How?
Explanation:
The chemical reaction produces a new substance with new and different physical and chemical properties. Matter is never destroyed or created in chemical reactions. The particles of one substance are rearranged to form a new substance.
In a physical change, a substance's physical properties may change.
A chemical change is a permanent change. A Physical change affects only physical properties i.e. shape, size, etc. ... Some examples of physical change are freezing of water, melting of wax, boiling of water, etc. A few examples of chemical change are digestion of food, burning of coal, rusting, etc.
Hope this helps!
Which is one source of the sediments that form sedimentary rocks?
Answers
Answer:
Sandstone, limestone, and shale
Explanation:
The rocks are most likely to start as sediments carried in rivers and end up in lakes and oceans
Answer:
D - materials dissolved in solutions
Explanation:
EDGE 2021
A cylinder at left with balls evenly spaced throughout the cylinder with an arrow leading to a cylinder at right with balls stacked near the bottom of the cylinder.
Which change of state is shown in the model?
condensation
deposition
boiling
freezing
Answers
Answer:
deposition
Explanation:
The model above shows a transition from a gas state to a solid state. This is known as "deposition."
The particles are widely-spaced on the left because they have a lot of energy; thus, they don't interact with each other. This is the reason why the gas doesn't have a definite shape and volume.
The particles on the right are stacked near the bottom because they don't have enough energy to move about; thus they interact with each other. This gives solid a definite shape and a definite volume. They can only move if the thermal energy increases.
Answer:
its DEPOSITION edg 2020
Explanation:
In The Lord of the Rings, Frodo and Sam use a rope to rappel down a cliff. The rope was 30 ells long. How high was the cliff in meters if the rope reached the bottom?
Answers
Answer:
324 meters
Explanation:
I don't really have an explanation
what event typically causes upwelling?
Answers
Answer:
Conditions are optimal for upwelling along the coast when winds blow along the shore. Winds blowing across the ocean surface push water away. Water then rises up from beneath the surface to replace the water that was pushed away. This process is known as “upwelling.”
Explanation:
Propanoic acid fromula
Answers
Answer:
C₃H₆O₂
Explanation:
Propionic acid is a colorless liquid with a sharp rancid odor. Produces irritating vapor. (USCG, 1999)
Which of the sets of elements are not in order of increasing force of attraction on the outermost electron in atoms of that element?
Ba < Sr < Ca
Al < P < Cl
F < Cl < Br
Mo < Pd < Sn
Answers
Answer:
The set of elements that are not arranged in the order of increasing ionization energy is Mo < Pd < Sn
Explanation:
The force of attraction on the outermost electron of an element can be described by the ionization energy of the element which decreases down a group and increases across a period
1) The given elements Ba, Sr, Ca, are group 2 elements arranged in the order from bottom up, which gives an increasing ionization energy, therefore;
Ba < Sr < Ca is arranged in increasing ionization energy, and therefore, increasing force of attraction of the outermost electron in atoms of the elements
Similarly, Al < P < Cl and Mo < Pd < Sn, are arranged in order of increasing ionization energy
However F < Cl < Br which are arranged from top down of elements in period 17 are arranged in the order of decreasing ionization energy, and therefore, decreasing force of attraction of the outermost electron in atoms of the elements.
The elements that are not arranged in their increasing force of attraction base on the outermost electron present in their atoms is D:
Mo < Pd < Sn.
Ionization energy of an element usually increase when moving along the period and decreases down a group and thus explains the force of attraction on the outermost electron.Option A are arranged in from down to up of group 2, which means they are in increasing order of ionization energy, same thing with option B, C. But option D, doesn't follow the arrangements hence, the correct answer.Therefore , option D is correct.
https://brainly.com/question/13794764?referrer=searchResults
What determines the number of hydrogens in an acid?
Answers
Answer:
It's the same as the charge of the anion
Explanation:
What determines the number of hydrogens in an acid is the charge of the corresponding anion. This is otherwise termed the Basicity of the acid
According to the question;
We are required to identify what determines the number of hydrogens in an acid.An acid is typically made up of an Hydrogen ion(Cation) and another anion.
For instance:
HCl is made up of 1 H+ ion and 1 Cl- ion.While, H2SO4 is made up of 2 H+ and one SO4²- ion.Read more:
https://brainly.com/question/16012782
Does hydrogen have a pH level? If so what is it?
Answers
Answer:
I think it has ph level of 7.0