41.788 mg of sample contains 100 mg, remains after 2000 years when the half-life of radium-226 is 1590 years.
Radium is a radioactive element. All radioactive elements are first order reactions with half-life constants.
For first-order reactions, the half-life is inversely proportional to the rate constant. The formula is:
for first-order reaction
[tex]t_{1/2} = \frac{ln2}{k} \\k = \frac{ln2}{t_{1/2}} \\\\k= \frac{0.693}{1590} \\\\\\k= 0.000436 years[/tex]
Radioactive decay period is:
t = 2.303 × log(a/a-x)/k
Where,
t ⇒ Decay time of radioactive element.
a ⇒ initial amount
a-x ⇒ remainder after t time
k ⇒ rate constant
put the value in formula
t = 2.303 × log(a/a-x)/k
2000 = 2.303 * log(100 / a-x) / 0.000436, so,
log(100 / a-x) = 2000 * 0.000436 / 2.303
=0.379
100 / a - x = log 0.379
100/a-x=2.393
a - x = 100 / 2.393
a - x = 41.788 mg
So after 2000 years, 41.788 mg of radium-226 will remain
Read more about half-life: Brainly.com/question/984564
#SPJ4
which of the following ethers cannot be prepared by a williamson ether synthesis? group of answer choices anisole tert-butyl methyl ether isopropyl ethyl ether tert-butyl phenyl ether
The following ether that cannot be prepared by a Williamson ether synthesis is Tert-butyl phenyl ether. Option D.
In Williamson ether synthesis alkoxides react with primary alkyl halides or sulfonate esters. Alkoxides are made from the conjugate bases of alcohols and consist of an R group attached to an oxygen atom. They are often written RO-, where R is an organic substituent.
Williamson synthesis always uses primary alkyl halides. Williamson's synthesis requires tert-butyl bromide and sodium tert-butoxide to produce di-tert-butyl ether. The product obtained is isobutylene and not di-tert-butyl ether. It is used in the production of both simple and mixed ethers. Alkyl halides are heated with alcoholic sodium or potassium alkoxides to form the corresponding ethers.
Learn more about Williamson synthesis here:-https://brainly.com/question/14568875
#SPJ4
Which of the following statements correctly reflects the most important consequence of Paull's exclusion principle? Click the answer you think is right.
a. An atomic orbital can hold a maximum of two electrons as long as they have the same spin.
b. An energy level can hold a maximum of two electrons of opposite spin.
c. An atomic orbital can hold a maximum of two electrons as long as they have opposite spins.
d. Orbits fill from lower to higher energy levels.
An atomic orbital can hold a maximum of two electrons as long as they have the same spin. correct option is (A).
Pauli exclusion principle for -
electrons says that no electrons can have the same values of the four quantum numbers in an atom. Quantum numbers are principle quantum number (denoted $5^{\prime} n^{\prime}$ )
it is also know as energy states. $n=1,2,3,4 \ldots$ (Also known as shell)
ii) Azimuthal quantum number (denoted as ' $l$ ') \\Azimuthal quantum number is decided based on th$m_s=\pm \frac{1}{2}$. The spin of electrons in an orbital will be opposite to each $\theta$ other and values are $+\frac{1}{2},-\frac{1}{2}$So :-\\Energy level, $n > 1$ can hold more than two electrones.
To know more about electrons, visit;
https://brainly.com/question/1255220
#SPJ4
15.0 ml of a 0.45 m cu2 solution was diluted with h2o to a total volume of 26.0 ml. what is the molar concentration of cu2 in the diluted solution?
The molar concentration of Cu2 in diluted solution would be 0.25M
What is molar concentration?
Molar concentration, also known as molarity, amount concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as a percentage of its volume. The number of moles per litre, denoted by the unit symbol mol/L as well as mol/dm3 in SI units, is the most widely used unit for molarity in chemistry. One mol/L of a solution's concentration is referred to as one molar, or 1 M.
How it can be solved ?
Molar concentration is the most effective way of describing a solute concentration in a solution. Molarity is described as the total number of moles of solute dissolved in per liter of solution M = mol/L.
Before dilution
Volume of solution = 15 ml
Cu2+ concentration = 0.45 ml
After dilution
Volume of solution = 26 ml
Cu2+ concentration = M2
M1V1 = M2V2
M2 = M1V1 / V2
M2 = O.45 X 15 / 26
M2 = 0.25 M
To know more about molar concentration from the given link
https://brainly.com/question/21633487
#SPJ4
. What is the mass of 4.75 mL of aluminum if its density is 2.1 g/mL?
Answer:
. What is the mass of 4.75 mL of aluminum if its density is 2.1 g/mL?
Explanation:
Hey ba.be can be frien.ds
a sample of xenon gas occupies a volume of 6.56 l6.56 l at 499 k.499 k. if the pressure remains constant, at what temperature will this same xenon gas sample have a volume of 3.38 l?
The temperature at which the xenon gas will have a volume of 3.38 litres is calculated to be 257.1 K.
How to calculate temperature in relation to volume when pressure is constant?Charles' law, which states that, provided the pressure is constant, the volume occupied by a particular quantity of gas is directly proportional to the absolute temperature. According to the law, volume increases with increasing temperature and decreases with decreasing temperature, applies when pressure is constant. The relationship equation for the Charles's law can be written as-
[tex]V_{i}[/tex]/[tex]T_{i}[/tex]= [tex]V_{f}[/tex]/[tex]T_{f}[/tex]
where,
[tex]V_{i}[/tex] = initial volume
[tex]T_{i}[/tex] = initial absolute temperature
[tex]V_{f}[/tex] = final volume
[tex]T_{f}[/tex] = final absolute temperature
According to the given question,
[tex]V_{i}[/tex] = 6.56 litres, [tex]T_{i}[/tex] = 499 Kelvin, [tex]V_{f}[/tex] = 3.38 litres, [tex]T_{f}[/tex] = ?
The temperature is given in Kelvin so we can put it as it is. So, on applying the given values in the formula:
6.56 / 499 = 3.38 / [tex]T_{f}[/tex]
Now, for final temperature we can rearrange the equation to get-
[tex]T_{f}[/tex] = (3.38 × 499) / 6.56
[tex]T_{f}[/tex] = 257.1 K
To know more about Charles's law, visit:
https://brainly.com/question/16927784
#SPJ4
Question 5 (1 point)
How many oxygens are on the products side of this equation?
C₂H6+ O₂ --> CO2 + H₂O
3
1
2
5
Answer: 3
Explanation:
The product side is usually the right side, so it's the CO₂ + H₂O. Just count the number of O's:
CO₂ = 2 O'sH₂O = 1 OSo, there are 3 oxygens on the product's side of this equation.
How would the shape of a dna molecule change if adenine paired with guanine and cytosine paired with thymine?.
The DNA molecule would have irregular widths along its length.
What occurs when thymine and cytosine and adenine and guanine are combined?Hydrogen bonds connect the bases of one strand to the bases of the second strand. Both adenine and cytosine form constant connections with thymine and guanine, respectively. The two strands spiral around one another as a result of the bonding, forming a structure known as a double helix.
As shown in panel C, no hydrogen bonds could form between adenine (A) and cytosine (C) because their hydrogen bond donors and acceptors are incompatible. Thymine and guanine are incompatible with one another.
Thymine and Cytosine have smaller chemical structures than Adenine and Guanine, which have bigger structures. Adenine and Thymine always pair with each other while Cytosine and Guanine do the same. This is due to the size and structure of the individual nucleotides. As a result, the two DNA strands are viewed
To learn more about cytosine refer to
https://brainly.com/question/27360728
#SPJ4
Naming and Writing Formulas Assignment.
Answer:
Having difficulties !!! screen shotted it :)
16. H20 - Covalent
17. Mn(NO2)2 - Ionic and called Manganese(II) nitrate
18. HgO - Ionic
19. Li3N - Covalent
suppose you are studying an unknown solution based on its precipitation reactions with other solutions, resulting in this data table.
na2so4 nacl na2co3
Unknown Precipitate No reaction Precipitate
Which compounds might be your unknown?
a. Pb(NO3)2
b. AgNO3
c. Ba(NO3)2
d. Ca(NO3)2
e. Sr(NO3)2
Ba(N03)2 is the unknown compound. correct option is (C).
Na2So4 -----> precipitate
Nacl ---------> No reaction
Na2Co3 --------> precipitate
Ba (No3)2 + Na2So4 -----------> BaSo4 (s) + 2 NaNo3 (aq)
Here white precipitate of barium sulphate will be produced.
Ba (No3)2 + Na2Co3 ------------> BaCo3 (s) + 2NaNO3 (aq)
Here white precipitate of barium carbonate will be produced.
Titration is a process of chemical analysis in which the quantity of some constituent of a sample is determined by adding to measured sample to an exactly known quantity of another substance with which the desired constituent reacts in a definite, known proportion.
To now more about precipitate click here:
https://brainly.com/question/14865339
#SPJ4
Identify the part of the atom that most determines the chemical properties of the atom.
The number of protons in the nucleus that determines the chemical properties of an atom.
What is proton ?
A proton is a stable subatomic particle with the symbol p, H+ or 1H+ and a positive charge of +1 e elementary charge. Its mass is slightly less than that of a neutron, 1836 times that of an electron (proton-to-electron mass ratio). Protons and neutrons, each with about one atomic mass unit, are collectively called "nucleons" (particles present in the nucleus).
All atoms have one or more protons in their nucleus. They ensure an electrostatic central force of attraction that binds atomic electrons together. The number of protons in the nucleus is the defining property of an element and is called the atomic number (denoted by the symbol Z). Since each element has a unique number of protons, each element has a unique atomic number, which determines the number of atomic electrons and, consequently, the chemical properties of the element.
To know more about proton, click the given link ;
https://brainly.com/question/1805828
#SPJ4
Describe reasonable syntheses of benzophenone, CH.CC,Hs, from each of the following Starting materials and any necessary inorganic reagents. (a) Benzoyl chloride and benzene (e) 1,1,2,2-Tetraphenylethene, (CH3)C=C(CH),
Benzene treated with Bromine in the prep of lewis Acid Bromo Benzene is formed, After that magnesium metal is used in This Grignard reagent treated with Benzoyl- chloride Benzophenone is synthesized.then Grignard reagent fomeel.
When 1, 1, 2,2, tetraphenyl ethene, on ozonolysis the alkene change into ketone, thus Benzophenone is formed.
Benzoyl chloride is an acyl chloride composed of benzene with one hydrogen replaced by an acyl chloride group. It is an important chemical intermediate for the production of other chemicals, dyes, perfumes, herbicides, and pharmaceuticals.
It acts as a carcinogen. To convert benzene to benzyl chloride he used two techniques. Fielded-Crafts alkylation reaction. Halogenated. There is evidence that α-chlorinated toluene and benzoyl chloride cause lung cancer in humans and benzoyl chloride has been shown to cause skin cancer in animals.
Learn more about Tetraphenylethene here:-https://brainly.com/question/8880115
#SPJ4
If a fluid has an average speed of 0. 5 m/s through a pipe with a cross-sectional area of 2m2 what is the fluid’s average speed if the cross-sectional area is changed to 4m2.
If a fluid has an average speed of 0. 5 m/s through a pipe with a cross-sectional area of 2 m², the fluid’s average speed will be 0.25 m/s
Initial average speed of fluid (v₁) = 0.5 m/s
Initial cross-sectional area of pipe (A₁) = 2 m²
Final cross-sectional area of pipe (A₂) = 4 m²
Final average speed of fluid (v₂) = ?
We will find out the final average speed of the fluid (v₂) by using the following equation:
A₁ v₁ = A₂ v₂
Rearrange the equation for v₂
v₂ = A₁ v₁ / A₂
Put the values in the above equation
Final average speed of fluid v₂ = (0.5 m/s × 2 m²) / 4 m²)
Final average speed of fluid v₂ = 1 m/s / 4
Final average speed of fluid v₂ = O.25 m/s
You can also learn about average speed from the following question:
https://brainly.com/question/12322912
#SPJ4
at what part of the day would there be the highest concentration of 4-c acids in cam plants? see section 10.4 (page) .
At the part of the day would there be the highest concentration of 4-c acids in cam plants is in the morning.
The CAM plants are the plants which can fix the carbon dioxide by the cam pathways. succulents plant are the cam plants. which are able to survive in a dry condition and at high temperatures. in these type of the the stomata open in the night and closes at the day time. at night cam plant fixes the carbon dioxide and uses it in the day time.
Thus, At the part of the day would there be the highest concentration of 4-c acids in cam plants is in the morning.
To learn more about CAM plant here
https://brainly.com/question/13962175
#SPJ4
I am named after the person who made the first periodic table and have 157 nuetronsin my nucleus
The element Mendelevium has 157 neutrons in its nucleus and is named after Dmitri Mendeleev who made the first periodic table.
What is the Mendelevium element?Mendelevium can be described as a synthetic element with the chemical symbol Md and atomic number 101. It is placed as a metallic radioactive transuranium element in the actinide series. This element is the first element by an atomic number that currently cannot be generated in macroscopic amounts by neutron bombardment of lighter elements.
The atomic mass of this element is 258 so it has 157 neutrons in its nucleus. The most stable is Md -258 with a half-life of 51 days, however, the shorter-lived Md-256 (half-life of 1.17 hours).
Mendelevium was discovered by bombarding alpha particles in 1955 and was named after Dmitri Mendeleev, father of the periodic table of chemical elements.
Learn more about Mendelevium, here:
https://brainly.com/question/28980572
#SPJ1
according to orwell, what does president truman say about the atomic bomb?
According to Orwell president Truman says that the bomb is incredibly expensive, and only three or four countries in the world are able to produce it due to the massive industrial effort required.
Truman said that the only factor in his decision to drop the bomb was the military. It is believed that a Normandy-style amphibious landing would have resulted in one million fatalities. Truman thought the bombs also helped save Japanese lives. The President had no intention of extending the conflict. American lives had already been lost as a result of more than 3,500 Japanese kamikaze raids. But he didn't anticipated the effect of bomb on human's.
For more information on Truman's decision to drop atom bomb kindly visit to
https://brainly.com/question/10469982
#SPJ4
what product will be formed when water is reacted with ethene in the presence of a catatlytic amount of concentrated sulfuric acid?
The product formed will be ethanol (ethyl alcohol) when water is reacted with ethene in the presence of a catalytic amount of concentrated sulfuric acid
What is use of catalyst in a reaction?A catalyst is a substance that, without being consumed by the reaction, speeds up a chemical reaction or reduces the temperature or pressure required to initiate one.
Ethyl alcohol is produced when ethene gas reacts with water through hydration. This ethyl alcohol undergoes dehydration to generate ethene once more when it interacts with sulfuric acid.
The reaction will be as follows:
CH_{2} = CH_{2} (l) + H_{2} O (l) → CH_{3} CH_{2} OH (aq)
CH_{3} CH_{2} OH → CH_{2} = CH_{2} + H_{2} O
Learn more about the topic catalyst: https://brainly.com/question/28813725
#SPJ4
Helppppppp-
Word bank: 02, CO2, H2O, OH, O, CO (Not all will be used.)
Number Bank: all positive integers.
Predict the products of the following combustion reactions, and balance each reaction
equation.
1.
1
+
2. 2
4.
6
+
3.11
+
2
C5H12 +
H20
C₂H₂ +
H2O
C10H8 +
C₂H6+
8
5
O₂ -->
0₂ -->
0₂ -->
0₂ -->
5
4
CO2
CO2
The following are the combustion and the balance reactions are :
C₂H₁₂ + 5O₂ -----> 2CO₂ + 6H₂OC₂H₅ + 13O₂ ------> 8CO₂ + 10H₂OC₁₀H₈ + 12O₂ -----> 10CO₂ + 4H₂O2C₂H₆ + 7O₂ -----> 4CO₂ + 6H₂OThe balanced equation is the one which the number of atoms in the reactants is equal to the same as they present product .
1) C₂H₁₂ + O₂ -----> CO₂ + H₂O
the number of atoms in reactants is not same as the in product. multiply
reactants product
C 2 1
H 12 2
O 2 3
to balance the equation multiply the 5 in O₂ , 2 in CO₂, 6 in H₂O.
C₂H₁₂ + 5O₂ -----> 2CO₂ + 6H₂Oreactants product
C 2 2
H 12 12
O 10 10
the equation now is balanced.
Thus, The following are the combustion and the balance reactions are :
C₂H₁₂ + 5O₂ -----> 2CO₂ + 6H₂OC₂H₅ + 13O₂ ------> 8CO₂ + 10H₂OC₁₀H₈ + 12O₂ -----> 10CO₂ + 4H₂O2C₂H₆ + 7O₂ -----> 4CO₂ + 6H₂OTo learn more about balanced reactions here
https://brainly.com/question/14280002
#SPJ9
a transition metal ion, x3 , has the electronic configuration [ar] 3d4. determine the atomic number of element x.
The element is Manganese (Mn).
The transition metal electronic configuration in the +3 oxidation state is [Ar]3d4 The neutral element electronic configuration is [Ar]4s 2 3d 5, Atomic number should be =25. Therefore the element is Manganese(Mn).
The atomic number is the number of a chemical element in the periodic table. Elements are arranged according to the increasing number of protons in the nucleus. Therefore, the number of protons, which is always equal to the number of electrons in neutral atoms, is also the atomic number. The atomic number is simply the number of protons in an atom. For this reason, it is sometimes called the proton number.
Learn more about The atomic number here:- https://brainly.com/question/621740
#SPJ4
identify necessary precautions when carrying out a vacuum filtration with organic materials.
while carrying out a vacuum filtration with organic materials these things should be kept in mind always;
1. melting point should be estimated by quick heating.
2. melting should be observed carefully by supplying slow heating.
3. careful measurement should be recorded during filtration.
vacuum filtration is also known as suction filtration used for separating the solid particles from the liquids by applying a driving force that pulls the liquid from the filter and the solid remains outside the filter. examples of vacuum filtration are making tea as we can separate tea leaves from tea by using a strainer in a cup.
learn more about melting points here;
https://brainly.com/question/40140
#SPJ4
The atomic number of potassium is 19. How does the isotope potassium 39 differ from isotope potassium 41?.
To learn isotope and atomic number.
What is isotope?
Atoms that contain variable numbers of neutrons but the same number of protons are called isotopes. Despite having almost equal chemical properties, they have different masses, which affects their physical characteristics.
What is atomic number?
The number assigned to a chemical element according to its atomic number in the periodic system, which places the elements in ascending order of the number of protons in their nuclei. As a result, the atomic number is also determined by the number of protons in the neutral atom, which is always equal to the number of electrons.
Since the number of protons in each of these isotopes is the same, potassium-39 has one fewer neutron than potassium-40 and two fewer than potassium-41. In a similar vein, potassium 40 has one fewer neutron than potassium 41.
Therefore, potassium 40 has one fewer neutron than potassium 41.
Learn more about isotope from the given link.
https://brainly.com/question/364529
#SPJ4
Why was heat needed to cause the zinc coating to diffuse into layers of copper?
Answer:
When the silver-colored penny is heated, the outside zinc atoms and inside copper atoms move around because of the heat excitement. This makes the outer layer of zinc mix with the copper below, which becomes an alloy called yellow brass
Explanation:
write the balanced dissociation equation for solid sodium acetate in aqueous solution. if it does not dissociate, simply write only nr.g be sure to include the proper phases for all species within the reaction.
The dissociation reaction of sodium acetate in water is:
CH3COONa + H2O ⇒ CH3COOH + NaOH
A dissociation reaction can be defined as a chemical reaction in which a compound breaks down into two or more compounds. This reaction occurs reversibly when molecules differentiate or decompose into smaller particles such as atoms, ions and radicals. A dissociation reaction can be recognized when there is only one reactant and multiple products.
The general formula of dissociation reaction is:
AB→A+B
When dissociation reactions occur in water, the polarity of water dissolves ionic compounds in the water. The cations of compounds are attracted to the negative poles of water molecules, and the negative ions of compounds are attracted to the positive poles of water molecules.
Question mentions sodium acetate as a compound that reacts with water molecules in a dissociative reaction. When sodium acetate (or ) dissolves in water, it decomposes to form two different types of ions - CH3COO- and Na+ and ; On the other hand, water molecules dissociate into ions. It then reacts with a weak acid, acetic acid ( CH3COOH), which in turn reacts to form a strong base, sodium hydroxide ( NaOH), making the solution alkaline.
To know more about sodium acetate
https://brainly.com/question/12924347
#SPJ4
the half-life of calcium-48 is 43 years. how long will it take a 44 mg sample to decay to a mass of 11 mg?
The half-life of calcium-48 is 43 years it take a 44 mg sample to decay to a mass of 11 mg 86 years
Half life is the interval of time required for one-half of the atomic nuclei of a radioactive sample to decay
Here given data is
t1/2 = 43 year
N₀ = 44mg
Nt = 11 mg
t = ?
So the formula is
Nt = N₀ (1/2)t/t1/2
11 mg = 44mg(1/2)t/43
11 mg/ 44mg = (1/2)t/43
log (0.25) = t/43 log (1/2)
t = 43 log (0.25)/log 0.5
t = 86 years
86 years will it take a 44 mg sample to decay to a mass of 11 mg
Know more about years
https://brainly.com/question/1431452
#SPJ4
A glass vessel fitted with a stopcock has a mass of
337.425 g when evacuated. When filled with Ar, it
has a mass of 339.855 g When evacuated and
refilled with a mixture of Ne and Ar, under the same
conditions of temperature and pressure, it weighs
339.077 g
What is the mole percent of Ne in the gas mixture?
The mole percent of Ne in the mixture is 64.8%.
The mass of glass vessel with stopcock is 337.425 g.
The mass of glass vessel with stopcock and Ar is 339.856 g.
The mass of Ar is 339.856 g-337.425 g=2.431 g
The atomic eight of Ar is 39.948 g/mol
What will the number of moles of Ar be?
{2.431 g}{39.948 g/mol}=0.06085mol
The mass of glass vessel with stopcock is 337.425 g.
The mass of glass vessel with stopcock and mixture of Ne and Ar is 339.077 g.
The mass of mixture of Ne and Ar is 339.077g-337.425g=1.652 \ g
Since the conditions of temperature and pressure are same, and the volume is also same (same glass vessel is used), the number of moles of only Ar and mixture Ar+Ne will also be same
The number of moles of mixture of Ne and Ar = 0.06085.
Let x moles of Ne are present. 0.06085-x moles of Ar will be present
The atomic weight of Ne is 20.18 g/mol
Mass of Ne is 20.18x g. The mass of Ar is
39.948 (0.06085-x) g =(2.431-39.948x) g
Total mass of the mixture is 20.18x \ g+(2.431-39.948x) g =( 2.431-19.768x) g
But total mass of mixture is 1.652 g
1.652g =( 2.431-19.768 x)g
19.768x = 2.431-1.652
19.768x =0.779
x =0.0394
Hence, the mole percent of Ne in the mixture is 100 x=64.8\%.
To learn more about mole concept, click on the link below
https://brainly.com/question/16488605
#SPJ1
Earth i approximately 4. 5 billion year old. I it likely that any of the rock that were on Earth' urface when it firt formed are till in exitence?
Yes, the Earth's surface has changed very little since its formation.
What is earth's surface?
As the earth to be understood completely has to be modeled and thus based on some sort of functionality as the further development and the knowledge of geographic research can be widened.
Thus geographers have created the maps and the globe to project the image of the earth landscape on the flat piece of paper and hence create a more detailed account of the lands, oceans and the surface of the part with effects. Earth's crust is made of igneous, metamorphic, as well as sedimentary rocks, which range in composition from mud as well as clay to diamonds and coal. Igneous rocks, which are created when magma cools, are the most prevalent types of rocks in the crust. Granite and basalt are abundant igneous rocks in the crust of the Earth.
To learn more about earth's surface from the given link
https://brainly.com/question/1406428
#SPJ4
substance normal boiling point hf 293k f2 85k the electron cloud of hf is smaller than that of f2 , however, hf has a much higher boiling point than f2 has. which of the following explains how the dispersion-force model of intermolecular attraction does not account for the unusually high boiling point of hf?
The electron cloud of HF is smaller than that of F₂. The following explains the dispersion-force model of intermolecular attraction does not account for the unusually high boiling point of HF is : liquid F₂ has weak dispersion force of attraction between the molecules and HF has both the weak dispersion force of attraction and hydrogen bonding between molecule.
The both dispersion force and the hydrogen bonding intermolecular attraction is present in the molecule of HF. this is the reason that HF has much higher boiling point than F₂. HF has high electronegativity difference between atoms, the molecules of HF will be tightly packed and have higher boiling point.
Thus, The electron cloud of HF is smaller than that of F₂. The following explains the dispersion-force model of intermolecular attraction does not account for the unusually high boiling point of HF is : liquid F₂ has weak dispersion force of attraction between the molecules and HF has both the weak dispersion force of attraction and hydrogen bonding between molecule.
To learn more about intermolecular attraction here
https://brainly.com/question/14310953
#SPJ4
How would you carry out the following transformation, a step used in the commercial synthesis of (S)-ibuprofen? The transformation occurs in the commercial synthesis of (S)-ibuprofen is,
Step 1: Conversion of the alcohol to the tosylate
Reaction of the alcohol via the tosylate occurs in only one inversion and the product stereochemistry has the opposite stereochemistry to that of the starting alcohol compound.
Step 2: Commercial Synthesis of (S)-Ibuprofen
Under certain conditions, reactions are known to have OH as a bad leaving group. p-TosCl is an excellent leaving group and the reaction of alcohols with toluenesulfonate occurs rapidly under these conditions. This gives the desired product with the configuration reversed at the chiral carbon.
Synthesis of (S)-ibuprofen is shown in the attached figure.
To know more about stereochemistry
https://brainly.com/question/13266152
#SPJ4
What is the correct term for rising water vapor meeting colder air and turning back into water droplets?.
A cycle consists of a carefully balanced set of molecules. In order for the cycle to continue, this balance must be maintained. How many turns of the calvin cycle must occur before one molecule of g3p can leave?.
The Calvin cycle must occur before the molecule exits g3p is 3.
Three Calvin cycles are required to make the G3P molecule. This allows the G3P molecule to break out of the cycle and continue making glucose. All three requirements are required:
Chlorophyll pigments, chloroplast "theater" and enzyme catalysis. In the first stage, it converts light energy into chemical energy, which until then is stored in ATP and NADPH molecules.
In the second step of the Calvin Cycle, the carbon-fixed 3-PGA molecule is converted to the monosaccharide molecule glyceraldehyde-3-phosphate. This stage uses energy from ATP and NADPH produced in the light-dependent reactions of photosynthesis. The Calvin cycle harnesses the chemical energy of ATP and reduces the power of NADPH from a light-dependent reaction to produce tricarbonate.
Learn more about the Calvin cycle here:
-brainly.com/question/920840
#SPJ4
In a lewis structure involving iodine and fluorine, if the central iodine atom has exactly one lone pair, how many fluorine atoms must be present?.
In a Lewis structure involving iodine and fluorine, if the central iodine atom has exactly one lone pair, so the five Florine atom must be present
A Lewis structure is a very simplified representation of the valence shell electron in a molecule and it is used to show how the electron are arranged around individual atom in a molecule and electron are shown as dot or for bonding electron as a line between the atom and since there is lone pair of electron on the iodine that means precisely 2 of the 7 valence electron are not shared with a fluorine atom and the remaining 5 are each shared with 1 fluorine atom and so there must be 5 fluorine atom surrounding central iodine atom
Know more about lone pair
https://brainly.com/question/14855744
#SPJ1