the half life for the first order decomposition of h202 is 660 minutes. what is the rate constant for the reaction

The best reagents to convert 1-bromo-1-methylcyclohexane to 1-bromo-2-methylcyclohexane are: c. NaOEt; 2, HBr, ROOR


1. Treat 1-bromo-1-methylcyclohexane with a strong base like sodium ethoxide (NaOEt) to remove the acidic proton from the carbon adjacent to the bromine, forming a cyclohexyl anion.
2. The anion then undergoes an intramolecular rearrangement (1,2-methyl shift) to form a more stable secondary carbocation.
3. In the presence of hydrogen bromide (HBr) and a radical initiator (ROOR), the secondary carbocation captures a bromide ion to form 1-bromo-2-methylcyclohexane.

Learn more about secondary carbocation here: brainly.com/question/13164680

#SPJ11

To synthesize an alkyl halide through an electrophilic addition reaction, a neutral organic starting material such as an alkene is typically used. The alkene can react with a halogen, such as chlorine or bromine, in the presence of a catalyst like iron or aluminum chloride. The resulting intermediate is an additional product that contains both the halogen and the alkene.

For example, if we start with the neutral organic starting material of propene, we can synthesize the alkyl halide 1-chloropropane through an electrophilic addition reaction with chlorine gas and aluminum chloride as the catalyst:

CH3CH=CH2 + Cl2 → CH3CH(Cl)CH3

The structure of the neutral organic starting material, propene, would be:

CH3CH=CH2

The electrophilic addition reaction involves the double bond in ethene reacting with a halogen molecule (in this case, Br2), resulting in the formation of 1-bromoethane.

Learn more about alkyl halide at  brainly.com/question/14057011

#SPJ11

Yes, the cyclic integral of heat does have to be zero. To explain in detail, the cyclic integral of heat refers to the amount of heat that is transferred to or from a system during a complete cycle of operation. This includes any processes where heat is added to the system as well as any processes where heat is removed from the system.

In order for a system to complete a cycle, it must return to its original state. This means that the internal energy of the system must remain the same at the beginning and end of the cycle. If the system were to gain or lose energy in the form of heat during the cycle, its internal energy would change and it would not return to its original state.

Therefore, in order for the system to return to its original state and complete a cycle, it must reject as much heat as it receives. This means that the cyclic integral of heat must be zero. If the cyclic integral of heat were not zero, the system would not be able to complete a cycle and would not be considered a closed system.

In a thermodynamic cycle, a system undergoes a series of processes that eventually return it to its initial state. Since the system's initial and final states are identical, the net heat transfer over the entire cycle must be zero.
To elaborate, during a thermodynamic cycle:

1. The system receives heat from an external source, causing its internal energy to increase.
2. The system performs work, either on the surroundings or within itself, leading to a decrease in its internal energy.
3. The system rejects heat to its surroundings, causing its internal energy to decrease further.

Since the system returns to its initial state after completing the cycle, the net change in its internal energy is zero. According to the first law of thermodynamics, the sum of the heat received and rejected by the system during the cycle must also be zero. In mathematical terms, this is represented as:

∮Q = 0

Here, ∮Q denotes the cyclic integral of heat. In summary, a system must reject as much heat as it receives to complete a cycle, making the cyclic integral of heat zero.

Learn more about cyclic integral here:

brainly.com/question/16724363

#SPJ11

The concept ideal gas equation is used here to determine the mass in grams of the gas. It is also called the general gas equation. The ideal gas law is the state of a hypothetical ideal gas.

The ideal gas law is formed from the combination of Boyles law, Charles's law and Avogadro's law. The state of an ideal gas is determined by both the microscopic and macroscopic parameters like pressure, volume, etc.

182 kPa = 1.79 atm

47.2°C = 320.2 K

750 mL = 0.75 L

The ideal gas equation is:

PV = nRT

1.79 × 0.75 = m / 28 × 0.0821 × 320.2 = 1.43 g

To know more about ideal gas equation, visit;

https://brainly.com/question/12242461

#SPJ1

Answer:

31.1°c

Explanation: PV=nRT

The new temperature is approximately 31.67°C. The volume change from 450 ml to 400 ml caused the temperature to decrease.

To find the new temperature, we can use Charles's Law, which states that the volume of a gas is directly proportional to its temperature when pressure and the amount of gas are constant.

The equation for Charles's Law is V₁/T₁ = V₂/T₂

Where V₁ and T₁ are the initial volume and temperature, respectively, and V₂ and T₂ are the final volume and temperature, respectively.

Given that V₁  = 450 ml, T₁ = 35°C, and V₂ = 400 ml, we can rearrange the equation to solve for T₂:

T₂ = ( V₂* T₁) / V₁

T₂ = (400 ml * 35°C) / 450 ml

T₂ ≈ 31.67°C

So, the new temperature is approximately 31.67°C. The volume change from 450 ml to 400 ml caused the temperature to decrease.

To learn more about  Charles's Law, here

https://brainly.com/question/34446857

#SPJ2

If the buffer is not prepared correctly or is not at the optimal pH, it may not exhibit these regions of stability, resulting in a flat pH curve.

Distilled water has a neutral pH of 7.0, which means that it is neither acidic nor basic. When an acid is added to distilled water, it can quickly change the pH of the solution. This is because distilled water does not have any buffering capacity, meaning it does not contain any molecules that can react with the acid to neutralize its effect on the pH.

On the other hand, a buffer solution contains a weak acid and its conjugate base, which can resist changes in pH when an acid or base is added. The buffer molecules can react with the acid, thereby maintaining the pH of the solution within a certain range. This is why the pH of a buffer solution is less sensitive to the addition of an acid than distilled water.

Buffers based on di- or triprotic acids can have multiple pH regions over which they are stable. This is because these buffers have more than one pKa value, which corresponds to the dissociation of each proton from the acid. If a di- or triprotic buffer is used, the pH curve may exhibit multiple plateaus or regions of stability, corresponding to each pKa value. However, if the buffer is not prepared correctly or is not at the optimal pH, it may not exhibit these regions of stability, resulting in a flat pH curve.

To learn more about pH visit;

brainly.com/question/15289741

#SPJ11

If the buffer is not prepared correctly or is not at the optimal pH, it may not exhibit these regions of stability, resulting in a flat pH curve.

Distilled water has a neutral pH of 7.0, which means that it is neither acidic nor basic. When an acid is added to distilled water, it can quickly change the pH of the solution. This is because distilled water does not have any buffering capacity, meaning it does not contain any molecules that can react with the acid to neutralize its effect on the pH.

On the other hand, a buffer solution contains a weak acid and its conjugate base, which can resist changes in pH when an acid or base is added. The buffer molecules can react with the acid, thereby maintaining the pH of the solution within a certain range. This is why the pH of a buffer solution is less sensitive to the addition of an acid than distilled water.

Buffers based on di- or triprotic acids can have multiple pH regions over which they are stable. This is because these buffers have more than one pKa value, which corresponds to the dissociation of each proton from the acid. If a di- or triprotic buffer is used, the pH curve may exhibit multiple plateaus or regions of stability, corresponding to each pKa value. However, if the buffer is not prepared correctly or is not at the optimal pH, it may not exhibit these regions of stability, resulting in a flat pH curve.

To learn more about pH visit;

brainly.com/question/15289741

#SPJ11

the pH of the buffer is approximately 3.76.The correct answer is option A.

To calculate the pH of a buffer that is 0.020 M HF and 0.040 M LiF, we will use the Henderson-Hasselbalch equation, which is:
pH = pKa + log([A-]/[HA])
First, we need to find the pKa. The Ka for HF is given as 3.5×10⁻⁴, and we can find the pKa using the following formula:
pKa = -log(Ka)
pKa = -log(3.5×10⁻⁴) ≈ 3.46
Now, we can use the Henderson-Hasselbalch equation:
pH = 3.46 + log([LiF]/[HF])
In this case, [A⁻] is the concentration of LiF (0.040 M) and [HA] is the concentration of HF (0.020 M).
pH = 3.46 + log(0.040/0.020)
pH = 3.46 + log(2)
pH ≈ 3.46 + 0.30
pH ≈ 3.76
So, the pH of the buffer is approximately 3.76, which corresponds to option A.

To learn more about buffer https://brainly.com/question/31369699

#SPJ11

The fact that the mole ratio of iron to oxygen is not exactly 2:3 may be due to experimental error or to the presence of impurities in the iron sample or the oxygen used in the experiment. It is also possible that the iron oxide produced is not entirely [tex]Fe_{2}Co_{3}[/tex], but may contain other iron oxides or oxygen-containing impurities.

To confirm the empirical formula of the iron oxide produced, additional analysis may be necessary. For example, the compound could be subjected to elemental analysis to determine the exact ratios of iron and oxygen in the compound. Alternatively, the compound could be analyzed using spectroscopic techniques to identify the specific chemical bonds and atoms present in the compound.

a. According to the law of conservation of mass, the total mass of reactants equals the total mass of products. Therefore, the mass of oxygen that reacted with iron can be calculated as:

Mass of oxygen = Mass of iron oxide - Mass of iron

Mass of oxygen = 118.37 g - 85.65 g

Mass of oxygen = 32.72 g

b. The molar mass of oxygen is 16.00 g/mol. To calculate the number of moles of oxygen atoms in the product, we can divide the mass of oxygen by its molar mass:

Number of moles of oxygen atoms = Mass of oxygen / Molar mass of oxygen

Number of moles of oxygen atoms = 32.72 g / 16.00 g/mol

Number of moles of oxygen atoms = 2.045 mol

c. The molar mass of iron is 55.85 g/mol. To convert the mass of iron used to moles, we can divide the mass by its molar mass:

Number of moles of iron = Mass of iron / Molar mass of iron

Number of moles of iron = 85.65 g / 55.85 g/mol

Number of moles of iron = 1.534 mol

d. The empirical formula of iron oxide can be determined using the mole ratio between iron and oxygen. The ratio of moles of iron to moles of oxygen is:

Moles of oxygen = 2.045 mol

Moles of iron = 1.534 mol

Mole ratio of iron to oxygen = 1.534 mol / 2.045 mol ≈ 0.75

The empirical formula of iron oxide can be expressed as a. According to the law of conservation of mass, the total mass of reactants equals the total mass of products. Therefore, the mass of oxygen that reacted with iron can be calculated as:

Mass of oxygen = Mass of iron oxide - Mass of iron

Mass of oxygen = 118.37 g - 85.65 g

Mass of oxygen = 32.72 g

b. The molar mass of oxygen is 16.00 g/mol. To calculate the number of moles of oxygen atoms in the product, we can divide the mass of oxygen by its molar mass:

Number of moles of oxygen atoms = Mass of oxygen / Molar mass of oxygen

Number of moles of oxygen atoms = 32.72 g / 16.00 g/mol

Number of moles of oxygen atoms = 2.045 mol

c. The molar mass of iron is 55.85 g/mol. To convert the mass of iron used to moles, we can divide the mass by its molar mass:

Number of moles of iron = Mass of iron / Molar mass of iron

Number of moles of iron = 85.65 g / 55.85 g/mol

Number of moles of iron = 1.534 mol

d. The empirical formula of iron oxide can be determined using the mole ratio between iron and oxygen. The ratio of moles of iron to moles of oxygen is:

Moles of oxygen = 2.045 mol

Moles of iron = 1.534 mol

Mole ratio of iron to oxygen = 1.534 mol / 2.045 mol ≈ 0.75

The empirical formula of iron oxide can be expressed as [tex]Fe_{2} Co_{3}[/tex], which corresponds to a mole ratio of iron to oxygen of 2:3. However, the mole ratio calculated above is not exactly 2:3, indicating that there may be some experimental error or that the iron oxide produced is not entirely [tex]Fe_{2} O_{3}[/tex]., which corresponds to a mole ratio of iron to oxygen of 2:3. However, the mole ratio calculated above is not exactly 2:3, indicating that there may be some experimental error or that the iron oxide produced is not entirely [tex]Fe_{2} O_{3}[/tex].

To know more about spectroscopic

brainly.com/question/30155075

#SPJ11

The molecules that directly participate in fatty acid synthesis by acting as energy sources are acetyl-CoA and ATP. Acetyl-CoA is the primary substrate for fatty acid synthesis, and ATP provides the energy required for the various steps involved in the process. During fatty acid synthesis, acetyl-CoA is converted into malonyl-CoA, which is then used to elongate the fatty acid chain. This elongation process requires ATP as an energy source. Therefore, both acetyl-CoA and ATP play crucial roles in fatty acid synthesis.

Learn more about acetyl-CoA here:

https://brainly.com/question/15057157

#SPJ11

When dissolved in water, salts can either produce acidic, basic, or neutral solutions depending on the ions they produce. If the salt contains an anion that is the conjugate base of a weak acid or a cation that is the conjugate acid of a weak base, the resulting solution will be acidic or basic, respectively.

For example, the salt sodium chloride (NaCl) is neutral because it produces the ions Na+ and Cl-, which do not have any acidic or basic properties. On the other hand, the salt ammonium chloride (NH4Cl) produces the ions NH4+ and Cl-, with the NH4+ ion acting as an acid and donating a proton to water molecules to produce H3O+ ions. This results in a solution that is acidic, with a pH less than 7.
8 Similarly, the salt sodium acetate (NaCH3COO) produces the ions Na+ and CH3COO-, with the CH3COO- ion acting as a weak base and accepting protons from water molecules to produce OH- ions. This results in a solution that is basic, with a pH greater than 7.
In order to determine whether a salt will produce an acidic, basic, or neutral solution, it is important to consider the properties of the ions it produces and their interactions with water molecules.
In summary, the acidity or basicity of a salt solution depends on the ions it produces when dissolved in water. The balanced chemical equations for the reactions causing the solution to be acidic or basic involve the ionization of weak acids or bases in the salt solution.

For more information on sodium chloride see:

https://brainly.com/question/9811771

#SPJ11

The Kb for fluoride ion (F-) in HF is C. 2.9×10⁻¹¹.

Kb, also known as the base dissociation constant, is the equilibrium constant for the ionization of a base in water. It can be calculated using the relationship between the Ka and Kb of a conjugate acid-base pair, which is given by the ion product constant of water (Kw).

To find Kb for fluoride ion (F-), we can use the relationship:
Ka × Kb = Kw
where Kw is the ion product constant for water, which is 1.0×10^-14 at 25°C.

First, we need to write the chemical equation for the dissociation of HF in water:
HF + H2O ⇌ H3O+ + F-

The Ka expression for this equilibrium is:
Ka = [H3O+][F-] / [HF]

Since we know Ka for HF is 3.5×10^-4, we can rearrange the equation to solve for [F-]:
[F-] = Ka × [HF] / [H3O+]

Now we can substitute this expression for [F-] into the Kb expression:
Ka × Kb = Kw
(3.5×10^-4) × Kb = 1.0×10^-14

Solving for Kb:
Kb = Kw / Ka
Kb = (1.0×10^-14) / (3.5×10^-4)
Kb = 2.9×10^-11

To know more Base Dissociation Constant:

https://brainly.com/question/31322571

#SPJ11

Retrosynthetic analysis of the anticholinergic drug cycrimine, and you have mentioned Route 1, where the product of the reaction between (A) and (B) is treated with SOCl2.

The structure of the final product.

However, you have not provided the structures of (A), (B), and (C). Please provide these structures so I can accurately provide the requested information in my answer.

To know more about Retrosynthetic analysis, visit:

https://brainly.com/question/30598839

#SPJ11

The maximum concentration of Ca²⁺ ions from the dissociation of CaF₂ in a 0.10 M NaF solution is 1.6×10⁻⁴ M.


1. Write the reaction: CaF₂(s) ⇌ Ca²⁺(aq) + 2F⁻(aq)

2. Find the common ion effect: F⁻ is the common ion, supplied by NaF; 0.10 M F⁻ initially.

3. Write the solubility product expression: Ksp = [Ca²⁺][F⁻]²

4. Obtain the Ksp value for CaF₂: Ksp = 3.9×10⁻¹¹

5. Set up an equation: Ksp = (x)(0.10 + 2x)², where x is the Ca²⁺ concentration.

6. Solve for x, which is the maximum Ca²⁺ concentration in the NaF solution: x ≈ 1.6×10⁻⁴ M.

To know more about common ion effect click on below link:

https://brainly.com/question/28202991#

#SPJ11

If you were to increase the concentration of reactants (SO₄²⁻ or HCN), the equilibrium would shift to the right, favoring the formation of products (HSO₄⁻ and CN⁻). Conversely, if you increased the concentration of products (HSO₄⁻ or CN⁻), the equilibrium would shift to the left, favoring the formation of reactants (SO₄²⁻ and HCN).

The reaction you provided is: SO₄²⁻(aq) + HCN(aq) → HSO₄⁻(aq) + CN⁻(aq)

To determine if this reaction is reactants favored or products favored, we need to know the equilibrium constant (K). However, this information is not provided.

Nevertheless, to predict the direction of the equilibrium shift, we can apply Le Chatelier's Principle. This principle states that if a system at equilibrium is subjected to a change in concentration, temperature, or pressure, the system will shift its equilibrium position to counteract the change.

So, if you were to increase the concentration of reactants (SO₄²⁻ or HCN), the equilibrium would shift to the right, favoring the formation of products (HSO₄⁻ and CN⁻). Conversely, if you increased the concentration of products (HSO₄⁻ or CN⁻), the equilibrium would shift to the left, favoring the formation of reactants (SO₄²⁻ and HCN).

Without the equilibrium constant (K) or any other information about the reaction conditions, we cannot definitively say if the reaction is reactants favored or products favored.

Visit here to learn more about  equilibrium : https://brainly.com/question/9024475
#SPJ11

The percent yield of the reaction between glucose and oxygen, forming 7.50 L of carbon dioxide, is 64.5%.

let's find the theoretical yield of CO2 by using stoichiometry.

1. Calculate the moles of glucose (C6H12O6) using its molar mass (180.16 g/mol):
10.0 g glucose * (1 mol glucose / 180.16 g glucose) = 0.0555 mol glucose

2. Use the stoichiometry of the balanced equation to find the moles of CO2:
0.0555 mol glucose * (6 mol CO2 / 1 mol glucose) = 0.333 mol CO2

3. Convert moles of CO2 to grams using the density of CO2:
7.50 L CO2 * (1.26 g CO2 / L CO2) = 9.45 g CO2 (actual yield)

4. Calculate the theoretical yield of CO2 by multiplying moles of CO2 by its molar mass (44.01 g/mol):
0.333 mol CO2 * (44.01 g CO2 / mol CO2) = 14.65 g CO2 (theoretical yield)

5. Calculate the percent yield using the actual yield and theoretical yield:
Percent yield = (actual yield / theoretical yield) * 100
Percent yield = (9.45 g CO2 / 14.65 g CO2) * 100 = 64.5%

So, the percent yield of the reaction between glucose and oxygen, forming 7.50 L of carbon dioxide, is 64.5%.

Visit here to learn more about reaction  : https://brainly.com/question/29988806
#SPJ11

The percent yield of the reaction between glucose and oxygen, forming 7.50 L of carbon dioxide, is 64.5%.

let's find the theoretical yield of CO2 by using stoichiometry.

1. Calculate the moles of glucose (C6H12O6) using its molar mass (180.16 g/mol):
10.0 g glucose * (1 mol glucose / 180.16 g glucose) = 0.0555 mol glucose

2. Use the stoichiometry of the balanced equation to find the moles of CO2:
0.0555 mol glucose * (6 mol CO2 / 1 mol glucose) = 0.333 mol CO2

3. Convert moles of CO2 to grams using the density of CO2:
7.50 L CO2 * (1.26 g CO2 / L CO2) = 9.45 g CO2 (actual yield)

4. Calculate the theoretical yield of CO2 by multiplying moles of CO2 by its molar mass (44.01 g/mol):
0.333 mol CO2 * (44.01 g CO2 / mol CO2) = 14.65 g CO2 (theoretical yield)

5. Calculate the percent yield using the actual yield and theoretical yield:
Percent yield = (actual yield / theoretical yield) * 100
Percent yield = (9.45 g CO2 / 14.65 g CO2) * 100 = 64.5%

So, the percent yield of the reaction between glucose and oxygen, forming 7.50 L of carbon dioxide, is 64.5%.

Visit here to learn more about reaction  : https://brainly.com/question/29988806
#SPJ11

The molarity of the 4.00 × 10^2 mL solution containing 19.7 g of potassium iodide is 0.2968 M.

To calculate the molarity of a 4.00 × 10^2 mL solution containing 19.7 g of potassium iodide, follow these steps:

1. Convert the volume of the solution from mL to L:
4.00 × 10^2 mL × (1 L / 1000 mL) = 0.400 L

2. Determine the molar mass of potassium iodide (KI):
Potassium (K) = 39.10 g/mol
Iodine (I) = 126.90 g/mol
Molar mass of KI = 39.10 g/mol + 126.90 g/mol = 166.00 g/mol

3. Calculate the moles of potassium iodide:
moles = mass / molar mass
moles = 19.7 g / 166.00 g/mol = 0.1187 mol

4. Calculate the molarity of the solution:
Molarity = moles / volume in L
Molarity = 0.1187 mol / 0.400 L = 0.2968 M

So, the molarity of the 4.00 × 10^2 mL solution containing 19.7 g of potassium iodide is 0.2968 M.

Know more about  molarity - brainly.com/question/30404105

#SPJ11

The name zinc(II) chloride is correct, and the compound should not be renamed.

The compound zinc(II) chloride is incorrect because it does not properly reflect the actual chemical composition of the compound.

In this compound, zinc is present in its 2+ oxidation state, which means it has lost two electrons to become a cation. Chloride is present in its anionic form, having gained one electron to become a chloride ion.

According to the naming convention for ionic compounds, the cation's name is written first, followed by the anion's name, with the suffix ""-ide"" replacing the ending of the anion name. However, since zinc can form cations with different charges, the charge of the cation is indicated using Roman numerals in parentheses after the metal name.

Therefore, the correct name of this compound should be zinc(II) chloride, indicating that the zinc ion is in the +2 oxidation state.

If the compound actually had two chloride ions for each zinc ion, it would be correctly named zinc chloride, without the need for Roman numerals since zinc only has one possible oxidation state in this case.

In summary, the name zinc(II) chloride is correct, and the compound should not be renamed.

Click the below link, to learn more about Nomenclature of compounds:

https://brainly.com/question/25845195

#SPJ11

8.04 is  the pH of a 0.015 m NaF solution.

The dissociation reaction of NaF in water is:

[tex]NaF + H_2O[/tex] ⇌[tex]Na^+ + F^- + H_2O[/tex]

[tex]F^-[/tex]can react with water to form HF and OH-:

[tex]F^- + H_2O[/tex] ⇌ [tex]HF + OH^-[/tex]

The equilibrium constant expression for this reaction is:

[tex]k_b[/tex] =[tex][HF][OH^-]/[F^-][/tex]

Since [tex]K_b[/tex] ×[tex]K_a = K_w[/tex] (water autoionization constant), we can solve for [tex]k_b[/tex]:

[tex]K_b = K_w/K_a[/tex] = 1.0 × 10^-14/7.1 × [tex]10^-^4[/tex] = 1.408 ×[tex]10^-^1^1[/tex]

We can use this [tex]k_b[/tex] value to calculate the concentration of [tex]OH^-[/tex] in the solution:

[tex]K_b = [HF][OH^-]/[F^-][/tex]

[tex][OH^-] = K_b[F^-]/[HF][/tex]= 1.408 × [tex]10^-^1^1[/tex]× 0.015/[HF]

To calculate the concentration of HF, we need the concentration of [tex]F^-[/tex]Since NaF is a strong electrolyte, it will dissociate completely in water, giving [tex][Na^+] = [F^-][/tex] = 0.015 M.

Now we can use the equilibrium constant expression for HF dissociation to calculate its concentration:

[tex]K_a = [H^+][F^-]/[HF][/tex]

[tex][H^+] = K_a[HF]/[F^-][/tex]= 7.1 × [tex]10^-^4[/tex] × [HF]/0.015

Finally, we can use the expression for the ion product of water to calculate the pH:

[tex]K_w = [H^+][OH^-][/tex]= 1.0 × [tex]10^-^1^4[/tex]

pH = [tex]-log[H^+] = -log(K_w/[OH^-])[/tex] = -log (1.0 × [tex]10^-^1^4[/tex]/[OH-]) = 8.04

Therefore, the pH of the 0.015 M NaF solution is 8.04.

To know more about pH refer here :

https://brainly.com/question/12609985

#SPJ11

To find the enthalpy for the reaction of manufacturing ethyl bromide from ethylene and hydrogen bromide, we can use bond energies.

The reaction can be written as: C2H4 + HBr → C2H5Br, Breaking the bonds in the reactants and forming the bonds in the product requires energy. We can use bond energies to calculate the energy involved in the reaction. The bond energies for the bonds involved in the reaction are: C-C = 348 kJ/mol.

C-H = 413 kJ/mol
C-Br = 276 kJ/mol
H-Br = 366 kJ/mol

Breaking the bonds in the reactants requires: 1 x C-C bond = 348 kJ/mol, 4 x C-H bonds = 4 x 413 kJ/mol = 1652 kJ/mol
1 x H-Br bond = 366 kJ/mol, Total energy required to break bonds = 2366 kJ/mol.

Forming the bonds in the product requires: 1 x C-Br bond = 276 kJ/mol
5 x C-H bonds = 5 x 413 kJ/mol = 2065 kJ/mol, Total energy released by forming bonds = 2341 kJ/mol.

To calculate the enthalpy of the reaction, we subtract the energy required to break bonds from the energy released by forming bonds: Enthalpy of the reaction = energy released - energy required
Enthalpy of the reaction = 2341 kJ/mol - 2366 kJ/mol
Enthalpy of the reaction = -25 kJ/mol, Therefore, the enthalpy for this reaction is -25 kJ/mol.

To know more about hydrogen click here

brainly.com/question/30037191

#SPJ11

Answer:

146.67 mL

Explanation:

P1V1/T1 = P2V2/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas, and P2, V2, and T2 are the final pressure, volume, and temperature.

We are given that the initial pressure and volume are 550 mmHg and 200 mL, respectively. The temperature is held constant, so T1 = T2. We want to find the final volume when the pressure is 750 mmHg, so P2 = 750 mmHg.

Substituting these values into the combined gas law, we get:

550 mmHg × 200 mL = 750 mmHg × V2

Solving for V2, we get:

V2 = (550 mmHg × 200 mL) / 750 mmHg = 146.67 mL

Therefore, the volume of the gas at a pressure of 750 mmHg is 146.67 mL when the temperature is held constant.

The reactant, catalyst and product of the decomposition reaction of hydrogen peroxide is as follows;

A decomposition reaction is a process in which chemical species break up into simpler parts. Usually, decomposition reactions require energy input.

In the decomposition of hydrogen peroxide (H₂O₂), hydrogen peroxide decomposes into water and oxygen in the presence of a metal oxide catalyst.

This means that hydrogen peroxide is a reactant, metal oxide is the catalyst while oxygen and water are the products.

Learn more about decomposition at: https://brainly.com/question/8009068

#SPJ1

The number of moles of ideal gas in a 325 mL container that has a pressure of 695 torr at 19 °C: B. 1.48 × 10^(-2) mol.

To find the number of moles of ideal gas in a 325 mL container that has a pressure of 695 torr at 19 °C, we can use the Ideal Gas Law equation, which is:

PV = nRT

Where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the given values to appropriate units:

1. Pressure: 695 torr to atm (1 atm = 760 torr)
P = 695 torr * (1 atm / 760 torr) = 0.914 atm

2. Volume: 325 mL to L (1 L = 1000 mL)
V = 325 mL * (1 L / 1000 mL) = 0.325 L

3. Temperature: 19 °C to Kelvin (K = °C + 273.15)
T = 19 °C + 273.15 = 292.15 K

Now we can plug in the values into the Ideal Gas Law equation and solve for n (moles):

0.914 atm * 0.325 L = n * (0.0821 L atm/mol K) * 292.15 K

n = (0.914 atm * 0.325 L) / ((0.0821 L atm/mol K) * 292.15 K) = 1.48 × 10^(-2) mol

So, the answer is B. 1.48 × 10^(-2) mol.

To learn more about Ideal Gas Law, visit:

https://brainly.com/question/25290815

#SPJ11

the standard cell potential for the given electrochemical cell is 1.05 V.

The standard cell potential for the given electrochemical cell can be calculated using the equation: E° cell = E° cathode - E° anode

where E° cathode is the standard reduction potential of the cathode [tex](Pb2+ + 2e- → Pb)[/tex] and E° anode is the standard oxidation potential of the anode [tex](Mn → Mn2+ + 2e-).[/tex]

The standard reduction potential of Pb2+ is -0.126 V, and the standard oxidation potential of Mn is -1.18 V. Therefore, the standard cell potential is:

[tex]E° cell = (-0.126) - (-1.18) = 1.05 V[/tex]

Therefore, the standard cell potential for the given electrochemical cell is 1.05 V.

learn more about electrochemical cell here:

https://brainly.com/question/30375518

#SPJ11

There are 2.94 x 10^24 molecules in 1.2 kg of XeF6.

First, we need to calculate the number of moles in 1.2 kg of XeF6.
Mass = 1.2 kg = 1200 g
Molar mass of XeF6 = 245.3 g/mol

Moles in 1.2 kg of XeF6 = Mass / Molar Mass
                                       = 1200 g / 245.3 g/mol
                                       = 4.89 mol

Next, we can use Avogadro's number to calculate the number of molecules.
1 mol = 6.022 x 10^23 molecules
Therefore,
4.89 mol = 4.89 mol x 6.022 x 10^23 molecules/mol
4.89 mol = 2.94 x 10^24 molecules

To know more about mole concept, click on the below link:

https://brainly.com/question/31039725

#SPJ11

An unknown quantity of NH4Br (ammonium bromide) is dissolved in 1.00 L of water to produce a solution.

The resulting solution's properties, such as concentration or pH, can be determined by further analysis, like titration or spectrophotometry. The quantity of NH4Br and the properties of the solution depend on the desired concentration or application.an unknown concentration of NH4Br in water.

Learn more about NH4Br here:

https://brainly.com/question/28557496

#SPJ11

To find the percent ionization of a monoprotic weak acid with an acid dissociation constant (aka) of 0.00839 and a concentration of 0.197 M, we can use the formula for percent ionization:

% ionization = (concentration of H+ ions / initial concentration of acid) x 100

Since the acid is weak and monoprotic, we can assume that the concentration of H+ ions is equal to the concentration of the acid that dissociates. Therefore, we can rewrite the formula as:

% ionization = (aka / initial concentration of acid) x 100

Plugging in the given values, we get:

% ionization = (0.00839 / 0.197) x 100

% ionization = 4.25%

Therefore, the percent ionization of a 0.197 M solution of this monoprotic weak acid is 4.25%.
To find the percent ionization of a 0.197 M solution of a monoprotic weak acid with a Ka of 0.00839, you can follow these steps:

1. Write the ionization equation: HA ⇌ H⁺ + A⁻
2. Set up an equilibrium expression: Ka = [H⁺][A⁻]/[HA]
3. Since the initial concentration of the acid is 0.197 M, assume x amount of it ionizes: [H⁺] = [A⁻] = x and [HA] = 0.197 - x
4. Substitute the values into the equilibrium expression: 0.00839 = (x)(x)/(0.197 - x)
5. Solve for x (x ≈ 0.0134) which represents the concentration of H⁺ ions.
6. Calculate the percent ionization: (0.0134/0.197) x 100% ≈ 6.8%

The percent ionization of the 0.197 M solution of this acid is approximately 6.8%.

Visit here to learn more about weak acid brainly.com/question/22104949

#SPJ11

The standard entropy change for the given reaction at 25 °C is 3.0 J/(K·mol).

To calculate the standard entropy change (ΔS°) for the given reaction at 25 °C, we need to subtract the standard molar entropies of the reactants from the products.

The standard molar entropy (S°) values for Mg(OH)2 (s), HCl(g), MgCl2 (s), and H2O(g) are 72.8 J/(K·mol), 186.9 J/(K·mol), 89.6 J/(K·mol), and 188.8 J/(K·mol), respectively.

So,

ΔS° = (2 × S°[H2O(g)] + S°[MgCl2 (s)]) - (S°[Mg(OH)2 (s)] + 2 × S°[HCl(g)])
ΔS° = (2 × 188.8 J/(K·mol) + 89.6 J/(K·mol)) - (72.8 J/(K·mol) + 2 × 186.9 J/(K·mol))
ΔS° = 3.0 J/(K·mol)

Therefore, the standard entropy change for the given reaction at 25 °C is 3.0 J/(K·mol).

For more questions on standard entropy - https://brainly.com/question/31425643

#SPJ11

The I−P−I bond angle is 180° and

Based on the molecular formula PI₃Br₂, we can deduce that this molecule has a trigonal bipyramidal molecular geometry. In this geometry, the terms you mentioned, I−P−I bond angle and Br−P−Br bond angle, can be determined as follows:

1. I−P−I bond angle: In a trigonal bipyramidal geometry, the bond angle between the axial positions is 180°. Since Iodine atoms are located at the axial positions, the I−P−I bond angle is 180°.

2. Br−P−Br bond angle: In the same trigonal bipyramidal geometry, the bond angle between the equatorial positions is 120°. As the Bromine atoms are located at the equatorial positions, the Br−P−Br bond angle is 120°.

So, the I−P−I bond angle is 180°, and the Br−P−Br bond angle is 120°.

To know more about bonds click on below link :

https://brainly.com/question/13941285

#SPJ11

The solubility of magnesium fluoride (MgF₂) in 0.17M sodium fluoride (NaF) is 0.0085 g/L.

To find the solubility of MgF₂ in NaF solution, we'll use the solubility product constant (Ksp) and common ion effect.

1. Write the balanced equation: MgF₂(s) ⇌ Mg²⁺(aq) + 2F⁻(aq)

2. Determine the Ksp of MgF₂: Ksp = [Mg²⁺][F⁻]² = (x)(2x)²

3. Calculate x from solubility in water: 0.015 g/L / 62.3 g/mol = 0.000241 mol/L

4. Calculate Ksp: Ksp = (0.000241)(2*0.000241)² = 2.53 x 10⁻¹¹

5. Find the solubility in NaF solution: Ksp = (x)(2x+0.34)², where 0.34 M is the [F⁻] from NaF

6. Solve for x, which is the molar solubility of MgF₂ in NaF solution: x ≈ 0.000136 mol/L

7. Convert molar solubility to grams per liter: 0.000136 mol/L * 62.3 g/mol ≈ 0.0085 g/L

To know more about solubility product constant click on below link:

https://brainly.com/question/1419865#

#SPJ11

Answer: 7 17/18

Explanation: firstly, convert 1 5/6 into a improper fraction = 5+6/11 = 11/6.

do the same with 4 1/3 = (4*3) = 12 + 1 = 13/3.

then multiply 11/6 * 13/3 = 143/18

this cannot be simplified by cancelling, so see how many times the denominator will go into the numerator.

143/18 = 7 17/18