The Haber process generates ammonia from nitrogen and
hydrogen gas through the following chemical equation.
N2 + 3H2 + 2NH3
Which is the excess reagent in the Haber reaction if equal
moles of Hydrogen and Nitrogen are used?

Answer:

Science and technology is an interdisciplinary topic encompassing science, technology, and their interactions: Science is a systematic enterprise that builds and organizes knowledge in the form of explanations and predictions about nature and the universe.

Explanation:

Answer:

15.32 days

Explanation:

From the question given above, the following data were obtained:

Half-life (t½) = 3.83 days

Original amount (N₀) = 225 g

Amount remaining (N) = 14.06 g

Time (t) =.?

Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:

Original amount (N₀) = 225 g

Amount remaining (N) = 14.06 g

Number of half-lives (n) =?

N = N₀ / 2ⁿ

14.06 = 225 / 2ⁿ

Cross multiply

14.06 × 2ⁿ = 225

Divide both side by 14.06

2ⁿ = 225 / 14.06

2ⁿ = 16

Express 16 in index form with 2 as the base

2ⁿ = 2⁴

n = 4

Thus, 4 half-lives has elapsed.

Finally, we shall determine the time. This can be obtained as follow:

Half-life (t½) = 3.83 days

Number of half-lives (n) = 4

Time (t) =.?

n = t / t½

4 = t / 3.83

Cross multiply

t = 4 × 3.83

t = 15.32 days

Therefore the time for 225 g sample of Radon to decay to 14.06 g is 15.32 days

Answer:

See explanation and image attached

Explanation:

The first step in the reaction is the attack of the hydroxide ion from the base abstracting a proton from (S)-2-methylcyclopentanone.

The abstraction of a proton from water by the substrate yields the enol form in equilibrium with the keto form.

The product formed is racemic hence the optical activity of (S)-2-methylcyclopentanone is lost.

Answer:

Non- polar and Covalent bonds

Answer:

Oxygen and Silicon

Explanation:

Oxygen and Silicon are the most abundant elements in magma, SiO₂

-TheUnknownScientist

Answer:

No the graph does not support Charles' Law.  Both volume and temperature increase so it would be a direct relationship.

Explanation:

Answer:

C. the sand is heated through radiation

Explanation:

Answer:

D

Explanation:

Sugar will dissolve faster when you stir the solution quickly because the act of stirring increases kinetic energy which increases the temperature.

Answer:

6.) 3, 12, 1, and 4   8.) 4, 1, and 3

Explanation:

By multiplying subscripts inside and outside of the parentheses you can count the number of atoms that are present. I recently answered a question for you and I did the math wrong I am going to go back and comment so you know which one and I will correct my errors. Sorry for the inconvenience!

the number of atoms in number 6:

N: 3

H: 12

P: 1

O: 4

the number of atoms for number 8:

Ca: 4

C: 1

O: 3

hope I clarified my mistake and helped you! :)

Answer:

[tex]m_{Pb(NO_3)_2}^{leftover}=38.34g[/tex]

Explanation:

Hello there!

In this case, given the chemical reaction by which the sodium chloride reacts with lead (II) nitrate and the former is the limiting reactant, it is possible to calculate the mass of lead (II) nitrate that are actually consumed according to the 2:1 mole ratio between them:

[tex]m_{Pb(NO_3)_2}=15.3gNaCl*\frac{1molNaCl}{58.44gNaCl}*\frac{1molPb(NO_3)_2}{2molNaCl} *\frac{331.21gPb(NO_3)_2}{1molPb(NO_3)_2} \\\\m_{Pb(NO_3)_2}=43.36gPb(NO_3)_2[/tex]

Thus, the leftover of lead (II) nitrate is:

[tex]m_{Pb(NO_3)_2}^{leftover}=81.70g-43.36g\\\\m_{Pb(NO_3)_2}^{leftover}=38.34g[/tex]

Best regards!

Answer:

1. Jennifer

Jennifer tried to cut corners and exclude a chunk of people from the population, making her results biased.

2. Brad

Brad was just seeing what he wanted to see, instead of facing the results of his experiment, which makes him scientifically biased. It's known as 'cherry-picking' informally.

Explanation:

Why are the rest not biased?

1. Tyler

You don't need your results and conclusion to agree with your hypothesis. A hypothesis is just your guess, it's not absolute and doesn't demonstrate bias if it doesn't agree with your conclusion.

2. Manny

He simply chose a topic he was interested in. It would be a different story if he already had a topic, but only chose information that agreed with his hypothesis, neglecting other pieces of information.

3. Ellie

This demonstrates no bias. She carried out an experiment and, according to experimental data, received the same results every time. She did not purposefully alter them to make them what she wanted to see.

Answer:

1. Jennifer

Jennifer tried to cut corners and exclude a chunk of people from the population, making her results biased.

2. Brad

Brad was just seeing what he wanted to see, instead of facing the results of his experiment, which makes him scientifically biased. It's known as 'cherry-picking' informally.

Explanation:

Answer:

lenses is used to refract light inward or outward

there are two type of lenses. Concave and convex lense

Convex lense converge ray of light

Concave lense diverge ray of light

useful application =:

=> camera

=> flashlight

=> lasers

=> Binoculars and Telescope

hope it helps

Answer:

Explanation:

Lenses are made of glass or other transparent materials for light. They are optically dense so light slows down on entering it. It is called refraction which bends the light on entering and leaving the lenses.

Refraction by lenses can be used for all kinds of optical applications, e.g. camera, telescope, magnifying glasses, solar heating.

Answer: The pH of solution is 10.

The pOH of the solution is 4.

Explanation:

pH is the negative logarithm of concentration of hydrogen ion.

As given concentration of acidic solution is [tex]1.00 \times 10^{-10} M[/tex]. Therefore, pH of the solution is calculated as follows.

[tex]pH = -log [H^{+}]\\= -log (1.00 \times 10^{-10})\\= 10[/tex]

The relation between pH and pOH is as follows.

pH + pOH = 14

pOH = 14 - pH

= 14 - 10

= 4

Thus, we an conclude that pH of solution is 10 and pOH of the solution is 4.

Answer:

Static energy is an energy between two charges.

Explanation:

a). A van de Graff generator builds up a positive electric charge on the dome by separating the negative static electric charges from the positive static charge using a quickly moving belt. The positive charge collects on the large metal dome of the generator. When the charge builds up is large enough, a lighting like spark can shoot from the dome to a grounded discharge rod.

             Like electric charges always repel each other, and oppositely electric charges will attract each other. When the aluminum pans are being charged by the van de Graff generator, then each of them attain the same positive polarity similar with the dome. Thus,  positive charge starts to accumulate over the surface of each of the pie pan. Each aluminum pan repels the others. These repulsive forces between the pans are so strong that they succeed in overcoming the gravity force and thus the top of the pan is pushed away from the generator's dome.

b). Static electricity is produced by a concentration of negative and positive electric charges. Like charges pushes away each other while unlike charges pulls each other.

            Objects generally have same numbers of positive charges as well as negative charges. And if there is any small imbalance in numbers of the charges on the object, it is charged.

            Negative charges easily torn away from the materials like the fur or hair. Also, the negative charges are held on other materials like the plastics. If we rub a plastic rod with fur, the negative charges will get transferred from fur to rod. The rod gets negatively charged and the fur is positively charged. As a result, the rabbit fur and the plastic rod were attracted to each other.

c). Coulomb's law stated that :

  [tex]$F=\frac{KQ_1Q_2}{d^2}$[/tex]    .............(i)

where, [tex]$Q_1$[/tex]  and [tex]$Q_2$[/tex] are the charges of two objects d is the distance between two objects.

As from the above equation, we can say that force of electrical attraction between two objects depends on the charges and the distance between objects.

1. The electrical force between two charged object is inversely proportional to the distance of separation between two objects.

Decreasing separation distance (d) between the objects will increase its attraction force.

2. And, increasing the charges of two objects(+ve and -ve) increases the force of attraction between two objects.

Answer:

The definition of the terms are:

1.) The extent of randomness in a system ENTROPY.

2.) Difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature is GIBBS FREE ENERGY.

3.) Solution in which no more solute can be dissolved in the solvent SATURATED SOLUTION.

4.)Sum of the internal energy plus the product of the pressure and volume for a reaction ENTHALPY.

5.) The condition that a reaction takes place without outside help SPONTANEITY.

Explanation:

ENTROPY is defined as the degree of disorderliness(randomness) of a system. It is usually denoted by 'S'. Entropy change is a factor that contributes to the driving force behind Chemical reactions. In a system, the greater the degree of disorderliness the higher the entropy and the greater the tendency for the reaction to take place. Therefore the extent of randomness in a system is ENTROPY.

GIBBS FREE ENERGY is defined as the difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature. Both the enthalpy (H) and entropy (S) can determine how a chemical reaction will occur.A scientist J. Willard Gibbs related the two by introducing a third parameter called the FREE ENERGY. This is usually represented as (G). Mathematically,

∆ G = ∆H - T∆S

Where T is the absolute temperature of the system.

When ∆G is negative the reaction is feasible, that is, it will occur. When ∆G is positive the reaction is not likely to occur. When it is zero the reaction is at equilibrium.

SATURATED SOLUTION is defined as a solution in which no more solute can be dissolved in the solvent. This means that it's a solution that contains as much solute as it can dissolve at that temperature in the presence of undissolved solute particles. In a saturated solution, the dissolved solutes and undissolved solutes are in equilibrium at that temperature. Any change in temperature will disturb this equilibrium and the system must alter to counter the change.

ENTHALPY is defined as the Sum of the internal energy (E) plus the product of the pressure(P) and volume(V) for a reaction. This is usually represented with the symbol 'H'. Mathematically,

H = E + PV.

The rate of chemical reaction depends on the frequency of effective collision between the reacting particles. When this occurs,the colliding particles becomes activated with increased kinetic energy. This energy must exceed a particular energy barrier called activation energy ( an internal energy) before a reaction can take place while the heat of the reaction is called ENTHALPY (H).

SPONTANEITY is the condition that a reaction takes place without outside help. This reaction doesn't require any energy input because the products at a more stable lower energy state than the reactants.

Answer:

True

Explanation:

This is because, The hydroboration oxidation of an alkene which is isobutene in the presence of a catalyst will result to alcohol as the product . Therefore, the OH group will attach or link itself to the carbon which is less obstructed. Thus this reaction is in accordance to Anti-Markownikoff's rule.

So isobutene on hydroboration oxidation will produce ter isobutyl alcohol.

Answer:

the same quantities as in B, plus the freezing point of the pure solvent

Explanation:

Using the formula;

∆T = K· m. i

Where;

∆T = freezing point depression of the solution

K = freezing point depression constant

m = molality of the solution

i = vant Hoff factor

Since the solute is a single, non-dissociating solute, i=1

The equation reduces to;

∆T = K· m

So we must know the freezing point depression constant and the molality of the solution.

In addition; ∆T = freezing point of pure solvent- freezing point of solution

Hence, if we use the formula, ∆T = K· m to calculate ∆T, then we must also know the value of the freezing point of pure solvent in order to compute the freezing point of the solution.

Answer:

The process of the formation of coal and oil is a very gradual and slow process.

Explanation:

The process of the formation of coal and oil is a very gradual process that takes up to millions of years.

iiiluuiijjuulluuuuuuuuullffffff

Answer:

According to who knows who I believe the answer is k2So4 + SrI2 ---> SrSo4 +2KI

S, 2. S, 2

K, 2. K, 2

I, 2. I, 2

O, 4. O, 4

Answer:

exothermic

Explanation:

because it releases energy

Answer:

two

Explanation:

The symbol “H” means the hydrogen atom; “2H” means two hydrogen atoms that do not make a molecule: they are just two separate (individual) atoms; “H2” means the hydrogen molecule (two hydrogen atoms that came together, sharing their electrons); “2H2” means two separate hydrogen molecules.

Answer:

N2+(3)H2=(2)NH3

explanation:

Answer:

The correct answer is - D. 250 g of the original sample remains. and F. Three half-lives have passed.

Explanation:

The half-life is the time is required for a quantity to reduce to half of its initial value. In this given case,

The half life cycle - 700 million years

The number of half-life cycle after 21 million years - 21/7

= 3 half life cycles.

Initial amount = 2000 g

after one half-life or 700 million years - 2000/2 = 1000 g

second half-life or 1400 million = 1000/2 = 500 g

third or 2100 million years ago = 500/2 = 250 g.

Answer:

The pressure and volume of a gas are inversely related

Explanation:

If we look at all the options stated; we will notice that all the statements are correct according to the kinetic theory of gases; except the statement "The pressure and volume of a gas are inversely related".

Recall that the inverse relationship between pressure and volume of a gas is captured by Boyle's law and not the kinetic molecular theory. Hence this statement is not part of the kinetic molecular theory.

Answer:

33.6g/mol is the molar mass of the unknown acid

Explanation:

The molar mass of a substance is defined as the ratio of the mass of the acid (0.138g) and the moles of the substance.

The diprotic acid, H₂X, reacts with magnesium hydroxide, Mg(OH)₂ as follows:

H₂X + Mg(OH)₂ → MgX + 2H₂O

Where 1 mole of the diprotic acid reacts per mole of magnesium hydroxide

To find the moles of the acid and solve the molar mass of it we need to find the moles of magnesium hydroxide added to the solution at equivalence point = Moles of diprotic acid as follows:

22.8mL = 0.0228L * (0.1800moles / L) = 4.104x10⁻³ moles of the acid.

The molar mass is:

0.138g / 4.104x10⁻³ moles =

Explanation:

i.Periodic table:It is a chart or table of the elements arranged into columns and rows according to their physical and chemical properties.

ii.Period on the periodic table:The horizontal rows of elements

iii.Column on the periodic table:The vertical representation of elements