The atmosphere is where the majority of the nitrogen on earth is found. 78% nitrogen gas makes it available to living things (N2).
What is nitrogen used for?The chemical industry depends on nitrogen. It is employed to create explosives, nylon, nitric acid, fertilizers, and colors. Nitrogen must be combined with hydrogen to create ammonia in order to create these products.
Is nitrogen harmful to humans?Individuals are killed every year by breathing "air" with insufficient oxygen. Several people believe nitrogen gas is safe since it makes up 78 percent of a air we breathe. Only when nitrogen is combined with the right amount of oxygen is it safe to breathe, though.
To know more about nitrogen visit:
brainly.com/question/16711904
#SPJ4
Other derived Sit Unit. and their formula
Answer:
There can be numerous derived quantities all branching from the basic 7 base quantities.
Explanation:
The derived SI units are
m/s² that is of acceleration that is rate of change of velocity
m/s is the SI unit of velocity that is rate of change of displacement
Nm is the SI unit of Torque i.e T= rxF
and so on
write a balanced chemical equation (smallest integer coefficients possible) for the reaction between an acid and a base that leads to the production of mg(ch3coo)2(aq). be sure to specify states such as (aq) or (s). give the names of the acid, the base, and the salt.
The balanced chemical equation for the reaction between an acid, acetic acid and base, magnesium hydroxide leads to the production of Mg(CH₃COO)₂(aq) is :
2CH₃COOH(aq) + Mg(OH)₂(s) ----> Mg(CH₃COO)₂(aq) + 2H₂O(l)
The reaction with the acid and base is below :
CH₃COOH(aq) + Mg(OH)₂(s) ----> Mg(CH₃COO)₂(aq) + H₂O(l)
acetic acid magnesium magnesium water
hydroxide acetate
reactant product
C 2 4
H 6 8
O 4 5
Mg 1 1
the reaction is not balanced the equation multiply by 2 in CH₃COOH and 2 in H₂O , we get
2CH₃COOH(aq) + Mg(OH)₂(s) ----> Mg(CH₃COO)₂(aq) + 2H₂O(l)
This is the balanced chemical equation .
To learn more about balanced chemical equation here
https://brainly.com/question/13565642
#SPJ4
a. 1) oso4; 2) h2o2, h2o b. this reaction is impossible c. 1) kmno4; 2) h2o d. 1) mcpba; 2) koh, h2o
The option (a)- is correct and it is impossible for the reaction .
What is reaction?
One or more chemicals, referred to as reactants, are changed into one or more new compounds, referred to as products, during a chemical reaction. Substances are composed of chemical elements or compounds.
What is compounds ?
When two or more elements combine chemically in a certain mass ratio, compounds are produced. Compounds are created when two or more different types of elements are mixed in a particular ratio of their atoms.
Therefore , the option (a)- is correct and it is impossible for the reaction .
Learn more about reactions from the given link.
https://brainly.com/question/11231920
#SPJ4
Write a balanced reaction equation for the combustion of methane (CH4): From the drop down options below; indicate the stoichiometric coefficient in front of each reactant and product in this reaction: Stoichiometric coefficient for CH4: [Select | Stoichiometric coefficient for O2: Select ] Stoichiometric coefficient for CO2: Select ] Stoichiometric coefficient for H2O: [Select ]
The combustion reaction is to rate the Stoichiometric coefficient.
What is combustion ?
Combustion is a chemical reaction that often involves the presence of oxygen and produces heat and light in the form of flames.
What is Stoichiometric coefficient ?
To maintain an even distribution of each element on the reactant and product sides of the equation, the stoichiometric coefficient is the number placed in front of atoms, ions, and molecules in a chemical process. Despite the fact that the stoichiometric coefficients might be fractions, whole numbers are routinely employed and frequently preferable.
CH4(g)+2O2(g)→CO2(g)+2H2O(g)
(1,2,1,2) are the coefficients that are needed to balance the equation for the combustion of methane.
Therefore, the combustion reaction is to rate the Stoichiometric coefficient.
Learn more about combustion from the given link.
https://brainly.com/question/10458605
#SPJ4
which elements has 1 valence electron in its outer shell and will react with a group 17 elements in a 1:1 ratio
Answer:Sodium(Na)
Explanation: According to electronic configuration of sodium, the outer shell has 1 unpaired electron. So, It will react with halogen elements (group 17) to form NaX. Where X is halogen element and ratio is maintained that is 1:1.
how many degrees of unsaturation are present in a molecule with the molecular formula c5h8brno? (1 pts)
The degree of unsaturation of the compound is 3.
What is the degree of unsaturation?When we talk about the degree of unsaturation, we are referring to the number of the hydrogen atoms that could not be found in the system. We know that when a saturated compound is formed, there is the loss of some of the hydrogen atoms from the molecular formula.
The term unsaturated in itself means that the compound do not have the exact number of the hydrogen atoms or the hydrogen atom compliment that it should normally have.
This would happen as the multiple bonds are formed then a given number of the hydrogen atoms would be lost from the system so that the multiple bond can now be formed in the compound that we are looking at. The more the number of the multiple bonds, the more the degree of unsaturation of the molecule.
Learn more about unsaturation:https://brainly.com/question/12433190
#SPJ1
another aldol reaction could have occurred in the same reaction mixture. the enolate of acetone could have added to another molecule of acetone [instead of adding to a molecule of benzaldehyde]. predict the structure of the product if the acetone undergoes an aldol addition and dehydration with another molecule of acetone
Acetone enolate preferentially attack the benzaldehyde rather than another acetone molecule because it is a strong nucleophile which will attack the carbonyl of benzaldehyde and forms a B- carbonyl alkoxide ion.
Benzalacetone is the end product of the aldol condensation reaction between acetone and benzaldehyde. Acetone may be deprotonated to produce a nucleophilic enolate anion since it contains -hydrogens (on both sides). Because it is significantly more electrophilic than a ketone, the aldehyde carbonyl interacts with the enolate quickly. Since it dehydrates spontaneously under the reaction conditions, the original aldol adduct cannot be separated. However, the resulting, - α, β-unsaturated ketone contains active hydrogen that can condense with additional benzaldehyde molecules.
To learn more about Benzalacetone visit:https://brainly.com/question/19340462
#SPJ4
help asha identify whether the reaction is a synthesis or decomposition reaction: h2 f2equation2 hf
Given reaction H2 + F2 → 2 HF is a Synthesis reaction.
What is meant by Synthesis Reaction?Synthesis reactions are those that take place when two distinct atoms or molecules interact to create a new chemical or molecule. When a synthesis reaction takes place, energy is often released, and the reaction is exothermic. An endothermic result, however, is also conceivable.
Because several reactants combine to generate a single product, synthesis reactions are also known as combination reactions.
Bonds between two substances are formed during synthesis reactions. As a result, you might want to think about synthesis reactions as processes that help your body create things. Because of this, we can see that synthesis reactions are crucial for both body growth and tissue healing.
To learn more about Synthesis reaction from given link
https://brainly.com/question/16560802
#SPJ1
How many 1H NMR signals (not peaks) would you predict for each of the following compounds? (Consider all protons that would be chemical shift nonequivalent.)
The precessional frequency of the compound's non-equivalent hydrogen atoms affects the signals in NMR. The non-equivalent hydrogens exist in an alternative chemical setting.
The (a) compound has three sets of non-equivalent hydrogens. The methyl hydrogens in (1) are in cis to chlorine. Methyl hydrogens, which are trans to chlorine, make up (2). Next to the chlorine atom are the (3) methyl hydrogens. The compound in (b) contains one set of non-equivalent hydrogens. The environments of the (1) and (1') methyl hydrogens are identical. The (c) compound has one set of non-equivalent hydrogens. The environments of the (1) and (1') methyl hydrogens are identical. The compound (d) contains one set of non-equivalent hydrogens. The atmosphere contains both the (1) and (1') methyl hydrogens. The compound (e) contains two sets of non-equivalent hydrogens. The chlorine atom is located at the carbon next to the (1), which is trans to the methyl group. The (2) is cis to the methyl group, and a nearby carbon has a bromine atom.
Hence, frequency of the compound's non-equivalent hydrogen atoms affects the signals in NMR.
To know more about NMR.
https://brainly.com/question/28428108
#SPJ4
political parties are most inclined to use which of the following strategies in national general election campaigns today?
Political parties are most inclined to match polling responses to identifiable individuals in voter files to determine patterns in national general election campaigns today.
Political parties are essential institutions of democracy. By competing in elections parties offer citizens a choice in governance, and while in opposition they can hold governments accountable. When citizens join political parties, volunteer their time, donate money and vote for their leaders, they are exercising their basic democratic rights.
In an election campaign winning is everything, there is no consolation for being a runner-up. With the increasing penetration of television and the internet, voters today are more informed, independent, and discerning in casting their votes.
Learn more about political parties here:
https://brainly.com/question/9115470
#SPJ4
3. How many molecules are in 0.043
moles of HCI?
Answer:
2.59 x 10^22 molecules
Explanation:
According to Avogadro's number, 1 mole of HCl has 6.022 x 10^23 molecules.
so 0.043 x (6.022 x 10^23)/1 = 2.59 x 10^22 molecules
All cells share certain structural features, but some structures are unique to eukaryotes. Identify whether these cell components are common to all cells or unique to eukaryotic cells by moving each cell component to the correct category Common to all cells Unique to eukaryotic cells plasma membrane DNA ribosome rough endoplasmic reticulum mitochondrion nucleus
Common to all cell : Plasma membrane , Ribosome ,DNA
Unique to Eukaryotic cell : Nucleus , Rough endoplasmic , reticulum Mitochondrion.
A membrane-bound building block that contains the basic molecules of life and from which all living things are made. A single cell is often a complete organism in its own right, such as a bacterium or yeast. Other cells acquire specialized functions as they mature. These cells cooperate with other specialized cells to become the building blocks of large multicellular organisms such as humans and other animals. Cells are much larger than atoms, but they are still very small. The smallest known cells are a group of tiny bacteria called mycoplasma.
learn more about cell here:
https://brainly.com/question/7196669
#SPJ4
during silica gel chromatography, it is normal for: during silica gel chromatography, it is normal for: all compounds to elute at identical rates, regardless of polarity less polar compounds to elute more slowly than more polar compounds more polar compounds to elute more slowly than less polar compounds
During silica gel chromatography, it is normal for: more polar compounds more polar compounds to elute more slowly than less polar compounds
It is a method in which a liquid serves as the mobile phase while the stationary phase is made up of solid adsorbents like silica gel and activated alumina powder. The adsorbents' activity and the solvent's polarity affect the active compound separation principle. A good separation of the compound occurs when the solvent's polarity is very low and the adsorbent's activity is strong and high. The outcomes of compound separation, on the other hand, are poor if the solvent's polarity is very strong and the activity of the adsorbents is high. It implies that chemical isolation and purification are not entirely pure.
The method of column chromatography is the most well-known and widely used method for separating complex mixtures that are packed in a column.
To learn more about chromatography Please click on the given link:
https://brainly.com/question/1470937
#SPJ4
list three types of alternative splicing patterns and how they lead to the production of different protein isoforms.
The three types of alternative splicing patterns with the correct description of how they lead to the production of different protein isoforms are: letters A, C and E.
These three options are correct because they accurately describe the different types of alternative splicing patterns and the ways in which they lead to the production of different protein isoforms. Alternative splice sites and mutually exclusive exons allow for the inclusion or exclusion of certain sequences, leading to proteins with different sequences.
How does the process that lead to the production of different protein isoforms occur?Alternative splice sites within an exon allow for the presence of different domains in the protein, while Mutually exclusive exons allow for the generation of proteins with different sequences.
Cassette exons allow for the exclusion of entire protein domains. Alternative polyadenylation produces messages with different 3' coding sequences and 3' untranslated regions, which can be important in regulatory events.
Complete question:
Choose the types of alternative splicing patterns with the correct description of how they lead to the production of different protein isoforms Select the three correct statements:
A) Alternative splice sites within an exon-different versions of an exon exist that allow for the presence of different domains in the protein. B) Mutually exclusive exons-certain sequences are either included or excluded, which allows generation of proteins with different sequences.C) Cassette exons-Whole exons are excluded from the mature message, resulting in a protein that is missing certain sequences (perhaps an entire protein domain). D) Alternative promoters produce messages with different 5' exons and proteins with different N-terminal ends. E) Intron retention-introns are included in the mature mRNAs, which can be used only to produce novel isoforms of the protein. E) Alternative polyadenylation - produces messages with different 3' coding sequences as well as different 3' untranslated regions, which can be important in regulatory events.Learn more about production of protein isoforms:
https://brainly.com/question/19793547
#SPJ4
how many ml of ethane gas, c2h6, can react with 154 ml of o2 gas in the combustion of ethane? the products of the combustion are carbon dioxide and water. assume all gases are at the same temperature and pressure
You will need to critical the moles of O2 from its mass and molar mass, then calculate the moles of C2H6 that can be created using stoichiometry.
First Calculate moles of O2.
n = m/M
n = moles = ? mol O2
m = mass(g) = 154 g O2
M = molar mass(g/mol) = (2×15.999 g/mol O) = 31.998 g O2/mol O2
n = m/M = g/g/mol = g × mol/g
n O2 = 154 g O2 × 1mol O2/31.998 g O2 = 4.34 mol O2
The balanced equation is:
2C2H6 + 7O2 → 4CO2 + 6H2O
By using stoichiometry to calculate the moles of C2H6.
Multiply the 4.34 moles of O2 by the mole ratio between O2 and C2H6 in the balanced equation, such that moles of O2 cancel and leave moles C2H6.
4.34 mol O2 × 2 mol C2H6/7 mol O2 = 0.556 mol C2H6 rounded up to three significant figures
1.25 mole of ethane will be required to react with 4.34 g of oxygen gas.
To know more about Ethane gas:
https://brainly.com/question/19128101
#SPJ4
the states that thermal energy can be transferred from a cooler location to a warmer location only when work is done.
The Second Law of Thermodynamics states that thermal energy can only be transferred from a cooler location to a warmer location when work is done.
This means that energy cannot spontaneously move from a cold body to a hot body; rather, energy must be input into the colder body in order to move it to the warmer body.
This is because thermal energy always flows from high temperature to low temperature, rather than the other way around. The work done must be greater than the thermal energy being transferred, so that the thermal energy can be transferred from cold to hot.
This is because energy is always conserved, so any energy that is gained from the transfer must be greater than the energy that was put in.
The Second Law of Thermodynamics is essential in understanding the behavior of many physical processes, such as the flow of heat and the efficiency of engines.
To know more about Carnot's engine, click below:
https://brainly.com/question/25819144
#SPJ4
Which of the following combinations is best suited to make a buffer with a pH of 3.4? You are combining 50 mL of each solution to create the buffer. O 0.1 M HF + 0.1 M NaF O 0.1 M HCH3COO + 0.1 M NaOH O 0.1 M NH3 + 0.1 M NHACI O 0.2 M HCI+ 0.1 M NaOH
A weak acid or base and the salt of that weak acid or base make up a buffer. Three combinations can be used to create buffers: (1) H 3PO4 and H 2PO4; (2) H 2PO4 and HPO 4 2; and (3) HPO 4 2 and PO 4 3.
Which mixture would result in the best buffer solution?Equivalent quantities of an acid and its conjugate base are found in the most efficient buffers. An added base or an added acid can be neutralized by a buffer that has roughly equal concentrations of a weak acid and its conjugate base in solution.
Do HCl and NaCl combine to form a buffer?Strong acid hydrochloric acid (HCl) and its conjugate base, chloride sodium chloride provides an anion (NaCl). Due to the fact that we are combining a potent acid with its incredibly weak conjugate base, this will not result in a buffer solution.
To know more about Buffer solutions visit:-
https://brainly.com/question/24262133
#SPJ4
How can i separate Zinc from brass
There are several methods that can be used to separate zinc from brass. One method is to use a chemical process called solvent extraction, which involves dissolving the brass in a chemical solvent that will selectively extract the zinc. Another method is to use electroplating, which involves using an electric current to coat the brass with a layer of pure zinc. Once the zinc has been separated from the brass, it can be recovered by heating the brass to a high temperature, causing the zinc to vaporize and be collected.
be sure to answer all parts. complete the reactions showing how you could prepare ethyl phenyl ketone from propanenitrile and a grignard reagent. draw the structure of the imine intermediate. propanenitrile draw structure ... grignard reagent h5arrowdown160 p4o10 diethyl ether pbr3 nacn h2o, h , heat [1] socl2; [2] nh3 draw structure ... h5arrowdown160 diethyl ether h2o, h , heat [1] socl2; [2] nh3 this step is not necessary nacn p4o10 pbr3 ethyl phenyl ketone
The propane nitrile react with the Grignard reagent in the presence of the diethyl ether the product form is called as the ethyl phenyl ketone.
The reaction in between the propane nitrile and the Grignard reagent is given as follows :
diethyl ether
CH₃ - CH₂ - C ≡ N + ph - MgBr ----------> CH₃ - CH₂ - C - ph
propane nitrile ||
O
ethyl phenyl ketone
The Grignard reagent is a type of the organometallic compound. the general formula for the grignard reagent is R - X. the very common use of grignard reagent is the in the organic synthesis.
To learn more about Grignard reagent here
https://brainly.com/question/14702056
#SPJ4
component that interacts more strongly with the liquid phase travels up further than one that interacts more strongly with the stationary phase
The stationary phase, which is the part of chromatography that doesn't move and is typically a solid a liquid supported on the a solid, is the component whose high solubility inside the liquid phase results in a high retention period.
Which substance engages the stationary phase the most?Along with a stationary phase of polar paper, the solvent functions as the mobile phase.Nonpolar chemicals will interact with the solvent and move more swiftly,while polar compounds will move more slowly and interact with the paper.
Which area is most receptive to the stationary phase?The stationary phase and green dye A have the strongest affinities.Because it has traveled a shorter distance from the source, it adsorbes to a stationary phase at a faster rate.
To know more about stationary phase visit :
https://brainly.com/question/14250736
#SPJ4
for the following solution, choose the formula of a chemical that you could add to the solution to make a buffer: 0.1 m hc2h2o2cl (chloroacetic acid). nac2h3o2 nac3h2o2cl nac2h3o2cl nac2h2o2cl
We require the conjugate base of an acid if we have one, and vice versa. If the required species is an ion. NaC2H2O2F is one alternative for the fluoroacetate ion, C2H2O2F-, which we need as a soluble molecule.
What are solutions for buffers?The solution can act as a buffer because it contains sizable amounts of both the conjugate base, F-, and the conjugate acid, HF. The titration curve of a buffer solution shows this buffering activity.
What is a buffer, exactly?The solution of reserve acidity or alkalinity that resists pH change upon the addition of a modest amount of acid or alkali is known as a buffer. A steady pH is necessary for the majority of chemical processes. Numerous pH regulating systems in nature employ buffering.
to know more about Buffers here:
brainly.com/question/16556401
#SPJ4
Determine the empirical formula of a compound that contains the following percentages of elements by mass:Mo = 43.95%, O = 7.33%, Cl = 48.72%
If a compound that contains the elements by mass: Mo = 43.95%, O = 7.33%, Cl = 48.72% then the empirical formula will be Cl3MoO
The molar mass of Cl=35.453,
Molar mass of Mo=95.94,
Molar mass of O=15.9994
Converting these to moles: Cl=1.3742137477787, Mo=0.45809881175735, O=0.45814218033176
Here the smallest mole value is 0.45809881175735
Now we have to divide all components by the smallest value: Cl=2.9998194985641, Mo=1, O=1.0000946707856
If we don't consider the fractional values the closest round of values will be: Cl=3, Mo=1, O=1
So the formula becomes Cl3MoO
Therefore the required empirical formula is Cl3MoO
Learn more about empirical formula:
https://brainly.com/question/26388921
#SPJ4
draw all of the resonance contributors for the ortho, meta, and para benzenonium intermediates in the chlorination of benzaldehyde and explain why ortho/para substitution predominates.
The combination of ortho and para produces a resonance structure that stabilises the arenium ion. As a result, ortho and para products form faster than meta. Because of steric effects, the para product is generally preferred.
In ortho-substitution, two substitutions occupy adjacent positions, that can be numbered 1 and 2. These positions are branded R and ortho in the diagram. The substituents in morpho occupy positions 1 and 3.The ultimate predictor of whether a methyl group is ortho-, para-, or meta-directing is its ability to stabilise an adjacent carbocation. Substituents with a covalent bond on the atom adjacent to a aromatic ring are ortho- and para- executives since they can form a new pi-bond with an adjoining carbocation. For electrophilic substitution, electron donating groups in an aromatic ring are made reference to as ortho/para groups.
Learn more about ortho-substitution here:
https://brainly.com/question/29359634
#SPJ4
explain why ncl3ncl3 is a liquid at room temperature while nh3nh3 is a gas. explain why is a liquid at room temperature while is a gas. hydrogen bonding is present in ncl3ncl3 but not in nh3nh3 . ncl3ncl3 has greater dipole moment than nh3nh3 and thus the dipole-dipole forces in ncl3ncl3 are stronger. the dispersion forces are greater in ncl3ncl3 than in nh3nh3 . ncl3ncl3 partly dissociates to form ions and nh3nh3 does not. therefore, ion-dipole interactions are present in ncl3ncl3 but not in nh3nh3 .
The NCl₃ is liquid at room temperature but NH₃ is gas at room temperature because NH₃ has the intermolecular hydrogen bonding , it hold thew ammonia very tightly.
The NCl₃ is liquid at room temperature but NH₃ is gas at room temperature because NH₃ has the intermolecular hydrogen bonding , it hold thew ammonia very tightly. the van der waal force is the weak force ads compared to the hydrogen bonding. NCl₃ partly dissociates to form ions and nh3nh3 does not. therefore, ion-dipole interactions are present in NCl₃ but not in NH₃
Thus, NH₃ is the gas at the room temperature and the NCl₃ is liquid at room temperature.
To learn more about temperature here
https://brainly.com/question/2272959
#SPJ4
diazonium salt can be used to generate benzyne and the benzyne intermediate can react in the diels-alder reactions: Chemical Formula: C14H8O2 Chemical Formula: C10Hg Propose chemical
This question is generating exothermic reactions. An exothermic reaction is the process through which energy is released when bonds are broken
Given that it produces heat and is explosive in nature, the chemical reaction indicated in this question is an exothermic reaction.
Exothermic processes can, in fact, produce both heat and light. The total energy of the reactants is greater than the total energy of the products in such reactions. An endothermic reaction is one that uses energy to break bonds and stores that energy in the bonds that are created during the reaction. An exothermic reaction is the process through which energy is released when bonds are broken. For instance, combustion is an exothermic reaction that first produces heat, carbon dioxide, and water from the reaction of oxygen, wax, and energy input.
To learn more about exothermic reaction please click on below link
https://brainly.com/question/10373907
#SPJ4
Which of the following answers has the element in the correct order for decreasing ionization energy ?
Ca, Ba, Be, Sr
Sr, Ba, Ca, Be
Ba, Sr, Ca, Be
Be, Ca, Sr, Ba
Answer:
A. Ca, Ba, Be, Sr
If the difference between 30 tines k and 35 is 235 find the value of k
base-free aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid in water catalyzed by functionalized carbon nanotube-supported au-pd alloy nanoparticles
n addition to these noncatalytic effects, many instances have shown that water can function as a reactant and even a cocatalyst in heterogeneous catalytic reactions, enhancing reaction rates and product selectivity.
Who or what is water's catalyst?
Platinum is by far the finest catalyst for severing water molecules to form hydrogen gas, according to scientists. According to a recent study by scientists at Brown University, the reason platinum is so effective is not what was previously thought.
A catalyzed process is what?
According to definitions, catalysis is the process by which the addition of a material (the catalyst) that is not itself modified during the chemical reaction changes the pace of chemical reactions (ACS, 1996).
To know more about catalyzed visit;
https://brainly.com/question/13622532
#SPJ4
pyruvate is the end product of glycolysis. its further metabolism depends on the organism and on the presence or absence of oxygen. draw the structure of the product from each reaction as it would exist at ph 7. include the appropriate hydrogen atoms.
the proper hydrogen atoms, CH 16 q 3. The organism and the presence or lack of oxygen determine metabolism.
What are the 3 different types of metabolism?Ectomorph, muscle mass, and endomorph are the three basic metabolic types. These are phrases you generally won't hear in your typical, everyday talks. However, understanding the body types you are born with will benefit your exercise program over time.
what is metabolism?The chemical processes that occur inside the body's cells during metabolism convert food into energy. Our bodies need this energy for all of their functions, including movement, thought, and growth.. The chemical processes of metabolism are regulated by various proteins in the body.
to know more about metabolism visit:
https://brainly.com/question/29763323
#SPJ4
How many grams of solute are present in 335 mL of 0.340 M KBr?
Answer:
41
Explanation: