The statement "the gravitational potential energy is always referenced to the height of the object as measured from the center of the Earth" is false because the formula for gravitational potential energy refers to the vertical distance of the object from the reference point, usually the surface of the Earth, not its center.
Gravitational potential energy is typically referenced to the height of an object relative to a reference point, such as the Earth's surface, rather than the center of the Earth. The formula for gravitational potential energy is:
Potential energy (PE) = mass (m) × gravitational acceleration (g) × height (h)
Height (h) in this formula refers to the object's vertical separation from the reference point, which is often the Earth's surface rather than its centre.
Hence, the statement "the gravitational potential energy is always referenced to the height of the object as measured from the center of the Earth" is false.
Learn more about "potential energy": https://brainly.com/question/21175118
#SPJ11
decay of silicon-27 by positron emission yields
The Decay of silicon-27 by positron emission yields aluminum-27, a positron, and a neutrino.
When silicon-27 decays by positron emission, it yields the following:
1. Silicon-27 (Si-27) undergoes positron emission, which is a type of radioactive decay.
2. During positron emission, a proton in the nucleus of Si-27 is converted into a neutron.
3. This process creates a positron (a positively charged electron) and a neutrino, which are emitted from the nucleus.
4. As a result of this decay, the atomic number of the element decreases by one, and the mass number remains the same.
5. The new element formed is aluminum-27 (Al-27).
For more questions on Decay, click on:
https://brainly.com/question/2053871
#SPJ11
the magnitude of heat/work done on a process depends only on the initial and final state of the process. t/f
The given statement " the magnitude of heat and work done on a process depends only on the initial and final state of the process" is True .
The magnitude of heat or work done on a process is independent of the path taken between the initial and final states, and depends only on the state of the system at the beginning and end of the process. This is known as the first law of thermodynamics.
This statement is true for a specific type of process known as a path-independent process, such as an isothermal or adiabatic process. In these cases, the amount of heat and work done is determined solely by the difference between the initial and final states, and not by the specific path taken to reach those states.
Hence, the given statement is True, the magnitude of heat and work done on a process depends only on the initial and final state of the process.
To know more about Heat refer here :
https://brainly.com/question/934320
#SPJ11
find the direction angle θa(ii)θa(ii) of the velocity of sphere aa after the first collision. express your answer in degrees. the angle is measured from the x -axis toward the y y -axis.
We can express the angle in degrees by converting from radians to degrees:
θa(ii) = θa(ii) * (180 / π)
To find the direction angle θa(ii) of the velocity of sphere A after the first collision, we'll need information about the initial velocities and masses of the spheres involved in the collision, as well as their relative positions.
Once we have that information, we can use conservation of momentum and energy principles to find the final velocities of the spheres. Then, we can calculate the direction angle θa(ii) by taking the inverse tangent (arctan) of the ratio of the y-component of the velocity to the x-component of the velocity:
θa(ii) = arctan(Vy / Vx)
Finally, we can express the angle in degrees by converting from radians to degrees:
θa(ii) = θa(ii) * (180 / π)
Please provide the necessary information, and I will be glad to help you find the direction angle θa(ii) for the velocity of sphere A after the first collision.
To learn more about velocity, refer below:
https://brainly.com/question/17127206
#SPJ11
A bus accelerates for 25 s at a rate of 0.2 m/s². how much does its velocity increase?
Answer: Velocity increase is, 5m/s.
Explanation: Given,
t = 25s, acceleration(a)=0.2m/s², assuming(required but not given) initial velocity = 0m/s.
According to laws of motion,
v = u + at,
v : Final velocity
u : Initial velocity
a : Acceleration
t : Time
Therefore, on putting values, as given, we get
v = 0 + (0.2)(25)
v = 5m/s
Therefore, velocity increase is 5m/s.
Read more about Velocity:
https://brainly.com/question/25905661
a crate (160 kg) is in an elevator traveling upward and slowing down at 4 m/s2. find the normal force exerted on the crate by the elevator. assume g = 10 m/s2.
The normal force exerted on the crate by the elevator is 960 N.
To find the normal force exerted on the crate (160 kg) by the elevator traveling upward and slowing down at 4 m/s², we need to consider the net force acting on the crate. Here are the steps,
1. Calculate the gravitational force (weight) acting on the crate: F_gravity = m * g
where m is the mass (160 kg) and g is the acceleration due to gravity (10 m/s²).
F_gravity = 160 kg * 10 m/s² = 1600 N (downward)
2. Calculate the net force acting on the crate due to the elevator's acceleration: F_net = m * a
where m is the mass (160 kg) and a is the deceleration of the elevator (4 m/s²).
F_net = 160 kg * 4 m/s² = 640 N (upward)
3. Calculate the normal force exerted on the crate: F_normal = F_gravity + F_net
F_normal = 1600 N (downward) + 640 N (upward)
Since the net force is upward, subtract the net force from the gravitational force:
F_normal = 1600 N - 640 N = 960 N
The elevator typically applies 960 N of force to the crate.
Learn more about "normal force": https://brainly.com/question/2254109
#SPJ11
suppose a moving object has a kinetic energy of 1/2mv^2=100j . What will be the object’s kinetic energy if...
(a) its speed is doubled?
(b) its mass is doubled?
(a) If the speed of the moving object is doubled, its kinetic energy will become four times greater.
(b) If the mass of the moving object is doubled, its kinetic energy will also become twice as much.
a) This is because kinetic energy is directly proportional to the square of the velocity, as shown in the equation KE = 1/2mv². Therefore, doubling the speed will result in a kinetic energy of 400 J.
b) This is because kinetic energy is directly proportional to the mass, as shown in the equation KE = 1/2mv². Therefore, doubling the mass will result in a kinetic energy of 200 J.
Kinetic energy is the energy that an object possesses due to its motion. It is calculated using the formula KE = 1/2mv², where m is the mass of the object and v is its velocity. This formula shows that kinetic energy is directly proportional to the mass and the square of the velocity of the object.
This means that any change in mass or velocity will have a direct effect on the object's kinetic energy. When the speed is doubled, the kinetic energy becomes four times greater because velocity is squared in the formula.
When the mass is doubled, the kinetic energy becomes twice as much because mass is directly proportional to kinetic energy.
To know more about kinetic energy click on below link:
https://brainly.com/question/999862#
#SPJ11
a point on the rim of a flywheel with radius 1.50 ft has a linear velocity of 30.0 ft/s. find the time for it to complete 4 p rad.
The flywheel's tip rotates through four revolutions in around 0.628 seconds.
How fast is a point on the rim of a flywheel with a diameter of 1 m moving?If a flywheel has a 1 m diameter and rotates at 1200 rpm, the acceleration at that point is. 8π2 m/s2
The time needed for a specific number of rotations of the flywheel can be calculated using the method for converting linear velocity to angular velocity:
ω = v / r
where r is the flywheel's radius in feet, is the angular velocity expressed in radians per second, and v is the linear velocity expressed in feet per second.
In this instance, v = 30.0 ft/s and r = 1.50 ft, respectively, so
The formula is = v / r = 30.0 ft/s / 1.50 ft = 20.0 rad/s.
Using the formula, we can calculate how long it takes the flywheel to complete 4 radians.
θ = ω t
When the angle is expressed in radians, the angular speed is expressed in radians per second, and the duration is expressed in seconds.
Here, we wish to determine t when = 4, so
4π = 20.0 rad/s * t
As we solve for t, we obtain
t = (4 rad) / (20.0 rad/s) = 0.628 seconds
To know more about flywheel visit:
https://brainly.com/question/18883102
#SPJ1
Use the exact values you enter to make later calculations.
You monitor the voltage difference across a capacitor in an RC circuit as time passes and find the following results.
Time when V = 0 Time when V = (0.63Vmax) = 7.50 volts
0.040 s 0.080 s
(a) If the equivalent resistance of your circuit is 200.0 ?, calculate the capacitance of the circuit.
C = (b) Using this capacitance in your calculation, find the charge on the capacitor when it is fully charged.
Q =
(a)The capacitance of the circuit is 2.00 × 10⁻⁴F. (b) The charge on the capacitor when it is fully charged is 1.50 × 10⁻³C.
(a) The time constant of the RC circuit can be calculated using the time when the voltage is at (0.63Vmax):
τ = RC = t(0.63Vmax) = 0.080 s - 0.040 s = 0.040 s
Given the equivalent resistance of the circuit, R = 200.0 Ω, we can solve for the capacitance:
C = τ/R = (0.040 s)/(200.0 Ω) = 2.00 × 10⁻⁴F
Therefore, the capacitance of the circuit would be 2.00 × 10⁻⁴F.
(b) The charge on a fully charged capacitor is given by:
Q = CVmax
Already know the capacitance, C, and the maximum voltage, Vmax, which is simply the voltage when the capacitor is fully charged. From the given data, can see that Vmax is 7.50 V. Therefore, we have:
Q = (2.00 × 10⁻⁴F)(7.50 V) = 1.50 × 10⁻³C
Therefore, the charge on the capacitor when it is fully charged would be 1.50 × 10⁻³C.
To know more about capacitance
https://brainly.com/question/4294800
#SPJ4
The activation energy of a certain reaction is 47.1kJ/mol . At 20C , the rate constant is 0.0170s^{-1} . At what temperature in degrees Celsius would this reaction go twice as fast? Given that the initial rate constant is 0.0170s^-1> at an initial temperature of 20C , what would the rate constant be at a temperature of 140 C for the same reaction described in Part A?
The activation energy of a certain reaction is used to find the temperature at which the reaction would go twice as fast. while the Arrhenius equation can be used to find the rate constant at a different temperature for the same reaction.
We can use the Arrhenius equation, which relates the rate constant of a reaction to the activation energy and temperature. We know the rate constant at 20C and the activation energy, so we can set up the equation as follows:
k2 = 2k1
ln(k2/k1) = Ea/R * (1/T1 - 1/T2)
T2 = Ea/R * (1/T1 - ln(k2/k1)/Ea)
Plugging in the given values, we get:
T2 = 47.1 kJ/mol / (8.314 J/mol*K) * (1/293 K - ln(2)/(47.1 kJ/mol))
T2 ≈ 358 K or 85 C
For the second part of your question, we can use the same equation to find the rate constant at 140 C:
ln(k2/k1) = Ea/R * (1/T1 - 1/T2)
k2 = k1 * e^(Ea/R * (1/T1 - 1/T2))
Plugging in the given values, we get:
k2 = 0.0170 s^-1 * e^(47.1 kJ/mol / (8.314 J/mol*K) * (1/293 K - 1/413 K))
k2 ≈ 1.81 s^-1.
To know more about Arrhenius equation refer here:
https://brainly.com/question/21148211#
#SPJ11
If two waves of same frequency and amplitude respectively on superposition produce a resultant disturbance of the same amplitude, the wave differ in phase by :
If the two waves have the same amplitude and frequency and produce a resultant disturbance of the same amplitude, they must differ in phase by 90 degrees.
What if two waves of the same frequency and amplitude combineIf two waves of the same frequency and amplitude combine, the resulting wave will have an amplitude equal to the sum of the two individual waves.
The phase difference between the two waves will determine the shape of the resulting wave. If the two waves are in phase, meaning their peaks and troughs line up, the resulting wave will have a larger amplitude
If the two waves are out of phase by 180 degrees, meaning their peaks line up with each other's troughs, they will cancel each other out and the resulting wave will have zero amplitude.
Learn more about resultant wave is athttps://brainly.com/question/1832380
#SPJ11
A particle has a rest mass of 6.64×10^-27 kg and a momentum of 2.10×10^-18 kg m/s. What is the total energy (kinetic plus rest energy) of the particle?________ J
The total energy (kinetic plus rest energy) of the particle is 9.3 × 10⁻¹⁰ J.
Given:
The rest mass of particle is E(rest) = 6.64 × 10⁻²⁷ kg
Momentum is p = 2.10 × 10⁻¹⁸ kg m/s
The total energy can be expressed as follows:
E(t) = K + E(rest) .....(1)
The kinetic energy is computed by using the below relation:
K = (1/2) × p²/m
Substitute the given values in the above relation, and we get:
K = (1/2) × (2.10 × 10⁻¹⁸)²/6.64 × 10⁻²⁷
K = 3.32 × 10⁻¹⁰ J .....(2)
The rest energy is computed by using the below relation:
E(rest) = mc²
Substitute the given values in the above relation, and we get:
E(rest) = 6.64 × 10⁻²⁷ × (3 × 10⁸)
E(rest) = 5.98 × 10⁻¹⁰ J .....(3)
From equation (1),
E(t) = 3.32 × 10⁻¹⁰ J + 5.98 × 10⁻¹⁰
E(t) = 9.3 × 10⁻¹⁰ J
Learn more about the total energy here:
https://brainly.com/question/31969020
#SPJ12
Acurrent of 100ma is passed through a solution of copper sulfate if 30c of chargemost pass before the copper deposited on it
If a current of 100 mA is passed through a solution of copper sulfate and 30 coulombs of charge pass before copper is deposited on the electrode, then the mass of copper deposited on the electrode 9.89 mg.
To calculate the mass of copper deposited on the electrode, we must apply Faraday's electrolysis equations, which indicate that the quantity of a substance deposited on an electrode during electrolysis is directly proportional to the amount of electricity that flows through the electrolytic cell.
The formula we can use is:
mass = (Q × M) / (n × F)
Where:
Q is the total electric charge passed through the cell (in coulombs)
M is the molar mass of the substance being deposited (in grams per mole)
n is the number of electrons involved in the deposition reaction (this is also the charge on the ion being deposited)
F is Faraday's constant, which is the amount of charge in one mole of electrons (96,485 C/mol)
In this case, we are depositing copper from a copper sulfate solution, and the reaction is:
Cu2+ + 2e- -> Cu
So n is 2 (since 2 electrons are involved) and M is the molar mass of copper, which is 63.55 g/mol.
Plugging in the numbers, we get:
mass = (30 C × 63.55 g/mol) / (2 × 96,485 C/mol)
mass = 9.89 mg
To know more about copper :
https://brainly.com/question/19761029
#SPJ1.
an asteroid is 4.5 times as far from the sun as the earth. what is the period of that asteroid in terms of earth years?
The period of the asteroid in terms of earth years would be approximately 18.25 years. This is calculated by taking the period of the Earth's orbit around the Sun (1 year) and multiplying it by 4.5.
What is earth ?Earth is the third planet from the Sun and the only object in the universe known to harbor life. It is the fifth largest planet in the Solar System and is the densest and most massive of the terrestrial planets. Earth is composed of numerous physical and chemical components, including an atmosphere and hydrosphere which help to regulate its climate and weather patterns. It also has numerous ecosystems, with millions of species of plants and animals that depend on each other for survival. Earth's lithosphere is composed of numerous tectonic plates that move and interact, creating earthquakes and volcanoes.
To learn more about earth
https://brainly.com/question/27943482
#SPJ1
a 100 g ball rolls off a table and hits 2.0 m from the base of the table. a 200 g ball rolls off the same table with the same speed. it lands at distance
The 200 g ball lands at a distance of 2.0 m from the base of the table.
We are given the masses of the balls (100 g and 200 g), the distance from the base of the table (2.0 m), and we need to determine the distance the 200 g ball lands from the base of the table.
To solve this problem, we'll assume that the only force acting on the balls after they leave the table is gravity, and that air resistance is negligible.
Since both balls roll off the table with the same speed and are only affected by gravity, their horizontal motion should be the same.
Recognize that both balls have the same initial horizontal speed and are under the influence of gravity.
Understand that their masses (100 g and 200 g) do not affect their horizontal motion because gravity affects all objects equally.
Since their horizontal motion is the same, the 200 g ball will also land 2.0 m from the base of the table, just like the 100 g ball.
Learn more about distance:
https://brainly.com/question/26550516
#SPJ11
A tugboat pulls a ship with a constant net horizontal force of 7.5x10^3 N. How much work is done on the ship if it moves 5km?
Answer:
The work done is 375×10²J or 37500J
Explanation:
W=F×d
W=F×s
W=7.5×10³×5
W=75×10²×5
W=375×10²J
What type of motion do star trails result from?
Answer:
Star trails reflect Earth's rotation, or spin, around its axis. The Earth makes a complete rotation relative to the backdrop stars in a period of about 23 hours and 56 minutes.
an object of mass 9.00 kg attached to an ideal massless spring is pulled with a steady horizontal force across a frictionless level surface. if the spring constant is 95.0 n/m and the spring is stretched by 22.0 cm , what is the magnitude of the acceleration of the object?
The force exerted by the spring using Hooke's Law, states that the force exerted by a spring is directly proportional to the amount it is stretched from its equilibrium position.
So, F = kx,
where F is the force exerted by the spring, k is the spring constant, and x is the displacement of the spring from its equilibrium position.
In this case, the spring is stretched by 22.0 cm, which is 0.22 m. So, F = (95.0 N/m) x (0.22 m) = 20.9 N.
Next, we can use Newton's second law of motion, which states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. So,
a = F/m,
where a is the acceleration of the object and m is its mass.
In this case, the net force acting on the object is the force exerted by the spring, which is 20.9 N. The mass of the object is 9.00 kg. So, a = (20.9 N) / (9.00 kg) = 2.32 m/s^2.
Therefore, the magnitude of the acceleration of the object is 2.32 m/s^2.
To know more about Force visit:
https://brainly.com/question/13191643
#SPJ11
2. you need an active lowpass filter that has a cutoff frequency of 500 hz. if the stopband is defined as being -20db from the passband, and you need this value to be reached at 600 hz,
The required order of the active lowpass filter is at least third-order to meet the stopband requirement of -20 dB at 600 Hz while maintaining a cutoff frequency of 500 Hz.
To explain further, an active lowpass filter is a type of electronic filter that allows low-frequency signals to pass through while attenuating high-frequency signals. The cutoff frequency of the filter is the frequency at which the output power is half the input power. The stopband is the frequency range above the cutoff frequency where the filter should attenuate the signal. In this case, the stopband is defined as being -20 dB from the passband at 600 Hz.
The order of the filter is related to its complexity and determines its ability to attenuate signals in the stopband. Higher-order filters have a steeper roll-off (i.e., faster attenuation of frequencies above the cutoff) and better attenuation in the stopband. A third-order filter is the minimum order required to meet the stopband requirement of -20 dB at 600 Hz while maintaining a cutoff frequency of 500 Hz.
To know more about lowpass filter, here
brainly.com/question/31492375
#SPJ4
--The complete question is, What is the required order of an active lowpass filter that has a cutoff frequency of 500 Hz and meets the stopband requirement of -20 dB at 600 Hz?--
how does lift change with the airspeed of constant aoa and altitude are held?
Lift is directly proportional to airspeed when angle of attack (AOA) and altitude are held constant, according to the lift equation: Lift ∝ Airspeed.
The lift equation states that lift is directly proportional to the square of airspeed, all else being constant. This means that as airspeed increases, lift will also increase, assuming the angle of attack (AOA) and altitude remain constant.
This relationship is due to the increase in the dynamic pressure of the air on the wings as the aircraft moves through the air at higher speeds. Higher airspeed results in greater air pressure difference between the upper and lower surfaces of the wings, leading to increased lift.
This relationship is important in aviation, as pilots need to carefully manage airspeed to control lift during different phases of flight, such as takeoff, cruise, and landing.
For more questions like Constant click the link below:
https://brainly.com/question/14977272
#SPJ11
what is the magnetic force exerted on a 2.15 m length of wire carrying a current of 0.914 a perpendicular to a magnetic field of 0.730 t ?
The magnetic force exerted on the 2.15 m length of wire carrying a current of 0.914 A perpendicular to a magnetic field of 0.730 T is approximately 1.43163 N.
The magnetic force exerted on a wire carrying a current perpendicular to a magnetic field can be calculated using the formula:
F = B * I * L
where F is the magnetic force, B is the magnetic field strength (0.730 T), I is the current (0.914 A), and L is the length of the wire (2.15 m).
F = 0.730 T * 0.914 A * 2.15 m = 1.43163 N
Therefore, the magnetic force exerted on the 2.15 m length of wire carrying a current of 0.914 A perpendicular to a magnetic field of 0.730 T is approximately 1.43163 N.
Know more about Magnetic Force here:
https://brainly.com/question/22358314
#SPJ11
Please can someone answer, I need help!!
Explain what role does capitalism and patriarchy play in American beauty? What images
projected in today's media are a result of gender inequality, what message do the images
send to young people? Explain in at least two paragraphs.
Answer:
Both beauty standards and the feminine beauty ideal are moving targets. Psychologists have argued that it may be all but impossible to separate what we inherently and individually find beautiful from what society tells us is beautiful. In my opinion, beauty standards are the gnarled and rotten roots of all that’s wrong with the industry and perhaps the world. They are tools of oppression that reinforce sexism, racism, colorism, classism, ableism, ageism, and gender norms. They are built into our societies and embedded into our brains.
According to scientists' recent research, women are well represented in media and entertainment companies. But even with corporate America’s increased focus on ensuring gender parity. Scientist observed that women’s day-to-day workplace experiences in media and entertainment are worse than men’s. Almost half of all respondents said they believe women in their fields are judged by different standards than men, which they say makes it difficult to achieve parity in senior management in their workplaces. So the media influence on pre-teens and teenagers can be deliberate and direct. For example, advertising is often directed at children of all ages. This means that children, pre-teens and teenagers are increasingly conscious of brands and images.
what is the electric potential at the center of the semicircle? express your answer in terms of the variables λ , r , and constants ϵ0 , π .
The electric potential at the center of the semicircle is V = (λ/2ε₀).
To find the electric potential at the center of the semicircle, you need to consider the following terms:
λ (linear charge density), r (radius of the semicircle), ε₀ (vacuum permittivity), and π (pi).
To calculate the electric potential at the center of the semicircle, follow these steps:
1. Divide the semicircle into small segments with length Δs, each carrying a small charge Δq = λΔs.
2. The electric potential at the center due to each small charge Δq can be found using the formula:
ΔV = kΔq/r, where k = 1/4πε₀ is the electrostatic constant.
3. Integrate ΔV over the entire semicircle to find the total electric potential at the center.
The integration gives you the total electric potential at the center of the semicircle as:
[tex]V = (\lambda/2\pi \epsilon_0) \int(d\theta)[/tex] from 0 to π, where dθ is the angle subtended by Δs at the center.
Upon integrating and substituting the limits, you get:
V = (λ/2πε₀) * π
So, the electric potential at the center of the semicircle is:
V = (λ/2ε₀).
Learn more about a semicircle:
https://brainly.com/question/15822332
#SPJ11
in a dream you're in a car traveling at 50 km/h and you bump into another car traveling toward you at 48 km/h. the speed of impact is
In a dream, you're in a car traveling at 50 km/h and you bump into another car traveling toward you at 48 km/h. the speed of impact is 98 km/h.
To calculate the speed of impact in your dream, where your car is traveling at 50 km/h and the other car is traveling towards you at 48 km/h, you simply add the speeds of both cars. The speed of impact in this scenario would be 50 km/h (your car) + 48 km/h (the other car) = 98 km/h. An impact velocity is the total speed of an object when it makes an impact with the ground or another object after falling from a certain distance. How do you find the impact speed of two cars? Once the momentum of the individual cars is known, the after-collision velocity is determined by simply dividing momentum by mass (v=p/m).
Learn more about the speed of impact here: https://brainly.com/question/27918228
#SPJ11
what is the change in magnetic potential energy of the loop from its original position to this new angled position?
The change in magnetic potential energy of a loop from its original position to a new angled position depends on the orientation of the magnetic field, the current flowing through the loop, and the angle between the loop and the field. When the angle between the loop and the magnetic field changes, the magnetic flux through the loop also changes, which results in a change in the magnetic potential energy of the loop.
The magnetic potential energy of a loop is given by the formula U = -m*B*cos(theta), where U is the magnetic potential energy, m is the magnetic moment of the loop, B is the magnetic field strength, and theta is the angle between the magnetic moment and the field. When the angle changes from the original position to a new angled position, the value of cos(theta) changes, which results in a change in the magnetic potential energy of the loop.
In general, the magnetic potential energy of a loop will increase when the angle between the loop and the magnetic field decreases, and it will decrease when the angle increases. The amount of change in magnetic potential energy will depend on the magnitude of the angle change and the strength of the magnetic field.
In conclusion, the change in magnetic potential energy of a loop from its original position to a new angled position can be calculated using the formula U = -m*B*cos(theta), where the angle theta is the difference between the original and new positions. This change in energy can be positive or negative, depending on the direction of the angle change and the orientation of the magnetic field.
Learn more about flux here:
https://brainly.com/question/14527109
#SPJ11
an aluminum wing on a passenger jet is 31 m long when temperature is 29°C. At what temperature would the wing be 4cm (.04m) shorter?
Answer:
T = 43,451.16°c
Explanation:
decrease in length = alpha ×original length × change in temperature
31m - 0.04m = 30.96m
30.96m = 2.3 ×10^-5 k^-1 × 31m × ( T - 302k), T temperature final
30.96m = 7.13 ×10^-4 × ( T - 302k)
T - 302k = 30.96m / 7.13 ×10^ -4 m/k
T - 302k = 43,422.16k
T = 43,724.16 k
T = 43,451.16°c
calculate the magnetic force on an airplane which has acquired a net charge of 1540 μc and moves with a speed of 100 m/s perpendicular to the earth's magnetic field of 5.0×10−5t .
Answer:
7.7 × 10^-10 N
Explanation:
To calculate the magnetic force on the airplane, we need to use the formula:
F = qvBsinθ
where:
F = magnetic force
q = net charge
v = velocity of the airplane
B = strength of the magnetic field
θ = angle between the velocity and magnetic field
In this case, the net charge is given as 1540 μc, which we can convert to Coulombs:
q = 1540 μC = 1.54 × 10^-6 C
The velocity of the airplane is given as 100 m/s, and the strength of the Earth's magnetic field is 5.0 × 10^-5 T. However, we also need to know the angle between the velocity and magnetic field. If the airplane is moving perpendicular to the magnetic field, then θ = 90°, which means that sinθ = 1.
Now we can plug in the values and calculate the magnetic force:
F = qvBsinθ
F = (1.54 × 10^-6 C)(100 m/s)(5.0 × 10^-5 T)(1)
F = 7.7 × 10^-10 N
Therefore, the magnetic force on the airplane is 7.7 × 10^-10 N.
*IG:whis.sama_ent
find the inertia dyadic about the mass center for the thin plate in fig- ure 4.50. a square void is centered at the center of the plate. the thin plate has a density of rho = 50kg/m
The inertia dyadic is (50 * a^2 * t/12) * [1 0 0; 0 1 0; 0 0 2].
The inertia dyadic about the mass center for the thin plate with a square void centered at the center of the plate can be calculated using the formula
I = ∫(r^2 * dm),
where r is the distance from the axis of rotation to the mass element dm.
Since the plate is thin, we can assume that it has a constant thickness and therefore, its mass can be expressed as
M = ρ * A * t,
where ρ is the density, A is the area of the plate, and t is the thickness of the plate.
The mass center of the plate is located at the geometrical center of the plate, which is also the center of the square void. Therefore, the distance from the mass center to any point on the plate is half the length of the diagonal of the square void, which is
d = √2 * a/2, where a is the side length of the square void.
Using these values, the inertia dyadic about the mass center can be expressed as
I = (M/12) * [a^2 + (d^2/2)] * [1 0 0; 0 1 0; 0 0 2],
where [1 0 0; 0 1 0; 0 0 2] is the inertia tensor for a thin plate with a uniform density, and the factor of 1/12 is due to the parallel axis theorem.
Substituting the given values, we get I = (50 * a^2 * t/12) * [1 0 0; 0 1 0; 0 0 2], where a is the side length of the square void and t is the thickness of the plate.
To learn more about "inertia", visit: https://brainly.com/question/1140505
#SPJ11
The transfer function of a normalized second-order active low-pass Butterworth filter was determined in Example 7-3. That particular filter used a unity-gain amplifier. A different form in which the two capacitors have equal values is shown in Figure P7-7. The VCVS now has a gain of 1.5858. Determine the transfer function G(s)=V 2 (s)/V 1(s) and show that it has the same form as in Example 7-3. (The denominator polynomial is the same, but the numerator constant is different.)
The transfer function of the active low-pass Butterworth filter in Figure P7-7 is given by G(s)=V 2 (s)/V 1(s) = 1.5858/(1 + (1/ωc)s).
This can be seen by analyzing the circuit and applying the basic principles of Laplace transforms. The transfer function is of the same form as the transfer function of the Butterworth filter in Example 7-3, which was given by G(s)=V 2 (s)/V 1(s) = 1/(1 + (1/ωc)s). The only difference is in the numerator constant.
In Figure P7-7, the numerator constant is 1.5858 due to the gain of 1.5858 of the VCVS. This gain increases the magnitude of the output signal, resulting in the different numerator constant. The denominator polynomial, however, is the same in both cases, since the two capacitors have equal values. Thus, the transfer functions of the two Butterworth filters are the same, except for the different numerator constants.
Know more about Laplace transforms here
https://brainly.com/question/1597221#
#SPJ11
an aircraft passes directly over you with a speed of 900 km/h at an altitude of 10 000 m. what is the angular velocity of the aircraft (relative to you) when directly overhead? three minutes later?
Okay, let's break this down step-by-step:
1) Aircraft speed = 900 km/h = 250 m/s
2) Altitude = 10,000 m
3) When directly overhead:
- Angular velocity = (Velocity) / (Distance) = (250 m/s) / (10,000 m altitude) = 0.025 rad/s
4) 3 minutes later:
- Aircraft will have moved 10,000 * (3/60) = 500 m away from your position
- New distance from you = 10,500 m
- New angular velocity = (250 m/s) / (10,500 m) = 0.024 rad/s
So in summary:
- When directly overhead: Angular velocity = 0.025 rad/s
- 3 minutes later: Angular velocity = 0.024 rad/s
Let me know if you have any other questions!
Okay, let's break this down step-by-step:
1) Aircraft speed = 900 km/h = 250 m/s
2) Altitude = 10,000 m
3) When directly overhead:
- Angular velocity = (Velocity) / (Distance) = (250 m/s) / (10,000 m altitude) = 0.025 rad/s
4) 3 minutes later:
- Aircraft will have moved 10,000 * (3/60) = 500 m away from your position
- New distance from you = 10,500 m
- New angular velocity = (250 m/s) / (10,500 m) = 0.024 rad/s
So in summary:
- When directly overhead: Angular velocity = 0.025 rad/s
- 3 minutes later: Angular velocity = 0.024 rad/s
Let me know if you have any other questions!
what is the magnitude of the momentum of a 29 g sparrow flying with a speed of 6.0 m/s ?
The magnitude of the momentum of the 29 g sparrow flying with a speed of 6.0 m/s is 0.174 kg m/s.
In Newtonian mechanics, momentum is the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction. Momentum is the product of the mass of a particle and its velocity.
To find the magnitude of the momentum of a 29 g sparrow flying with a speed of 6.0 m/s, you need to use the formula for momentum:
momentum = mass × velocity
First, convert the mass of the sparrow from grams to kilograms:
29 g = 0.029 kg
Next, plug in the values for mass and velocity into the formula:
momentum = 0.029 kg × 6.0 m/s
Now, calculate the momentum:
momentum = 0.174 kg m/s
Learn more about momentum:
https://brainly.com/question/1042017
#SPJ11