The graph below shows how the temperature and volume of a gas vary when
the number of moles and the pressure of the gas are held constant. How can
the volume of the gas in a sealed container be decreased if the pressure is
constant?
T
A. By letting the gas diffuse over time
B. By lowering the temperature
C. By raising the temperature
D. By letting the gas effuse over time

The Graph Below Shows How The Temperature And Volume Of A Gas Vary Whenthe Number Of Moles And The Pressure

Answers

Answer 1

The volume of the gas in a sealed container would be decreased at constant pressure: C. by raising the temperature.

What is Charles law?

Charles law states that when the pressure of an ideal gas is kept constant, the volume of a gas is directly proportional to the absolute temperature of the gas.

This ultimately implies that, the volume of a gas decreases at constant pressure when its temperature is decreased and vice-versa.

In conclusion, we can infer and logically deduce that the volume of the gas in a sealed container would be decreased at constant pressure by raising the temperature in accordance with Charles law.

Read more on Charles law here: https://brainly.com/question/888898

#SPJ1


Related Questions

Classify each of the following as a homogeneous and heterogeneous mixture


Soda water, wood, air, soil, vinegar, filtered tea​

Answers

Soda water, wood, air, soil, vinegar, filtered tea.

Answer:

Homogeneous mixtures : Soda water, vinegar and filtered tea. Heterogeneous mixtures : Wood and soil.

The chemical colchicine is used in the production of karyotypes. Colchicine prevents spindle fibers from forming during the cell cycle. What is a result of preventing spindle fibers from forming?

Answers

The result of preventing spindle fibers from forming is mitotic division stops in metaphase and cannot proceed to anaphase.

What is colchicine?

Colchicine is a drug use to remove swelling and decrease the amount of uric acid production.

It prevents the formation of spindle fibers during the cell cycle.

Thus, the correct option is C.

Learn more about colchicine

https://brainly.com/question/3417925

#SPJ4

1. Swimming pool manufacturers recommend maintaining the
pool chlorine concentration at 3.0 ppm. What is the mass of
chlorine in a pool containing 3.4 x 106 L of water? ™

Answers

A 3.4 × 10⁶ L swimming pool must have a mass of 1.0 × 10⁷ mg Cl₂ to maintain a concentration of 3.0 ppm.

What is "ppm"?

"ppm" of "parts per million" is a unit of concentration equivalent to milligrams of solute per liters of solution.

A pool must maintain a chlorine concentration of 3.0 ppm (3.0 mg/L). The mass of chlorine in 3.4 × 10⁶ L is:

3.0 mg Cl₂/L × 3.4 × 10⁶ L = 1.0 × 10⁷ mg Cl₂

A 3.4 × 10⁶ L swimming pool must have a mass of 1.0 × 10⁷ mg Cl₂ to maintain a concentration of 3.0 ppm.

Learn more about ppm here: https://brainly.com/question/13395702

#SPJ1

What is the molar mass of H₂CO₂?

Answers

Answer:

I think the Molar mass of H₂CO₂ should be 62..

Explanation:

I'm not too sure tho... Hope this helps!

Decomposition occurs when...

Answers

Answer:

Decomposition begins at the moment of death, caused by two factors: 1.) autolysis, the breaking down of tissues by the body's own internal chemicals and enzymes, and 2.) putrefaction, the breakdown of tissues by bacteria.

Explanation:

hope it will help you

Explain the structure of an atom.​

Answers

[tex]\huge\purple{Hi!}[/tex]

An atom is a complex arrangement of negatively charged electrons arranged in defined shells about a positively charged nucleus. This nucleus contains most of the atom's mass and is composed of protons and neutrons (except for common hydrogen which has only one proton). All atoms are roughly the same size. A convenient unit of length for measuring atomic sizes is the angstrom (Å), which is defined as 1 x 10-10 meters. The diameter of an atom is approximately 2-3 Å.

In 1897, J. J. Thomson discovered the existence of the electron, marking the beginning of modern atomic physics. The negatively charged electrons follow a random pattern within defined energy shells around the nucleus. Most properties of atoms are based on the number and arrangement of their electrons. The mass of an electron is 9.1 x 10-31 kilograms.

One of the two types of particles found in the nucleus is the proton. The existence of a positively charged particle, a proton, in the nucleus was proved by Sir Ernest Rutherford in 1919. The proton's charge is equal but opposite to the negative charge of the electron. The number of protons in the nucleus of an atom determines what kind of chemical element it is. A proton has a mass of 1.67 x 10-27 kilograms.

The neutron is the other type of particle found in the nucleus. It was discovered by a British physicist, Sir James Chadwick. The neutron carries no electrical charge and has the same mass as the proton. With a lack of electrical charge, the neutron is not repelled by the cloud of electrons or by the nucleus, making it a useful tool for probing the structure of the atom.

Even the individual protons and neutrons have internal structure, called quarks. Six types of quarks exist. These subatomic particles cannot be freed and studied in isolation. Current research continues into the structure of the atom.

please help meeeeeeeee​

Answers

Number one is the balanced equation because both sides have 1 Ca 1 C and 3 Os

3.

Explanation:

all Chemical mixtures have the same amount of numbers making them all balanced.

(that's the simple way of putting it, but hoped it helped ✌)

A sample of gas occupies 300 mL at 100K. What is its volume when the
temperature is increased to 200K? (P and n= constant)

Answers

If the temperature of the sample of gas increases to the given value, the volume also increases to 600mL.

What is Charles's law?

Charles's law states that "the volume occupied by a definite quantity of gas is directly proportional to its absolute temperature.

It is expressed as;

V₁/T₁ = V₂/T₂

Given the data in the question;

Initial temperature of gas T₁ = 100KInitial volume of gas V₁ = 300mLFinal temperature T₂ = 200KFinal volume V₂ = ?

V₁/T₁ = V₂/T₂

V₂ = V₁T₂ / T₁

V₂ = ( 300mL × 200K ) / 100K

V₂ = 60000mLK / 100K

V₂ = 600mL

Therefore, if the temperature of the sample of gas increases to the given value, the volume also increases to 600mL.

Learn more about Charles's law here: brainly.com/question/12835309

#SPJ1

right 9 in a equation

Answers

Answer:

x+y = 12

Explanation:

shfb gfgjj ghjj dvgg ggggg ghggs ufac t g dgyyh

One atom of lithium, Li, reacts with fluorine, F, to produce lithium fluoride, LiF2. The atomic mass of lithium is 7 amu. The mass of one atom of lithium fluoride is 45 amu. Which statement about the reaction is correct?

Answers

Lithium reacts with one atom of fluorine, and the atomic mass of fluorine is 38 amu.

What is atomic mass?

The atomic mass of an element is the average mass of the atoms of an element measured in atomic mass unit.

One lithium (Li) atom can combine with one fluorine (F) atom. Together, they make the formula LiF.

Fluorine has seven electrons of it's own. Lithium gives up its one electron to make both atoms happy.

Hence, lithium reacts with one atom of fluorine, and the atomic mass of fluorine is 38 amu.

Learn more about the atomic mass here:

https://brainly.com/question/10700214

#SPJ1

why do we not know what was on the far side of the moon until 1960's

Answers

Answer:

Like Earth, it gets plenty of sunlight. We don’t see the far side because “the moon is tidally locked to the Earth,” said John Keller, deputy project scientist for NASA’s Lunar Reconnaissance Orbiter project. “The moon does rotate, but it rotates at the same speed that it rotates around the Earth.”

Explanation:

Select all the correct answers.
What do scientists use to communicate extremely small measurements?

scientific notation
unit prefixes
graduated cylinders
physical models
base units

Answers

Scientists use scientific notation to communicate extremely small measurements. Hence, option A is correct.

What scientific notation?

Scientific notation is a way of writing very large or very small numbers.

Scientists use scientific notation to represent very small or very large numbers because this notation increases the  

accuracy of measured quantities.

convenience in using the numbers.

the number of significant figures.

precision of measurements.

Hence, option A is correct.

Learn more about the scientific notation here:

https://brainly.com/question/18073768

#SPJ1

Why is it important to convert into units of kelvin before using the ideal gas law?.

Answers

It is important to convert into units of kelvin before using the ideal gas law because
Temperature is the denominator in the combined gas laws and can be derived in the idea gas law to the denominator.


calculate the molarity of 65.3 grams of sugar(342.3 g/mol), c12h22011 in 750 ml of solution.

Answers

Answer:

0.254 M

Explanation:

If the formula mass of sugar is 342.3 g/mol, and there are 65.3 g, then there are 65.3/342.3=0.190768 mol.

Also, 750 mL = 0.750 L.

molarity = (moles of solute)/(liters of solution)

molarity = 0.190768/0.750 = 0.254 M

Toothpaste contains Sodium fluoride which is used to prevent tooth decay. How many grams are in 1 mole NaF?

Answers

Answer:

0.24%

Explanation:

A toothpaste contains 0.24% by mass sodium fluoride (NaF) used to prevent dental caries and 0.30% by mass triclosan, C12H7Cl3O2, a preservative and antigingivitis agent. One tube contains 119 g of toothpaste. (6.4, 6.5) Components in toothpaste include triclosan and NaF.a. How many moles of NaF are in the tube of toothpaste?b. How many fluoride ions (F?) are in the tube of toothpaste?c. How many grams of sodium ion (Na+) are in 1.50 g of toothpaste?d. How many molecules of triclosan are in the tube of toothpaste?Solution 124CQStep 1 of 4:Given:Mass of toothpaste = 119 g. Mass percent of sodium fluoride (NaF) = 0.24%Mass percent of triclosan (C12H7Cl3O2) = 0.30%a. Here, we are asked to find the number of moles of NaF in the tube of toothpaste.Mass percent of sodium fluoride (NaF) = 0.24%First, let’s find the mass of NaF in the tube: = 119 g = 0.2856 grams Molar mass of NaF = 41.98 g/mol This means, 1 mol NaF = 41.98 g. So, the mole-mass factor is: and Therefore, number of moles of NaF will be: = 0.2856 g NaF = 0.00680 mol NaFHence, the number of moles of NaF in 119g toothpaste is 0.00680 moles. ________________

According to mole concept, there are 41.988 grams   in 1 mole NaF that is sodium fluoride.

What is a mole?

Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.

It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.

It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass  in grams present in one mole  of atoms is its atomic mass.

Number of moles is given by the formula, mass/molar mass and hence mass= 1×41.988= 41.988 g.

Thus, there are 41.988 g in 1 mole NaF.

Learn more about mole,here:

https://brainly.com/question/26416088

#SPJ2

How many moles of carbon dioxide are there in 52.06 g of carbon dixoide

Answers

Answer:

Moles of substance are defined ratio of the given mass of the substance to the molar mass of the substance.

Given :

The 52.06 grams of carbon dioxide.

To find :

The moles of carbon dioxide.

Solution:

The mass of carbon dioxide = 52.06 g

The molar mass of carbon dioxide = 44.01 g/mol

The moles of carbon dioxide:

1.183 moles of carbon dioxide are there in 52.06 g of carbon dioxide.

Explanation:

How many moles of O2 are formed from 1.252 g of HgO?

Answers

2HgO—»2Hg+O_2

Moles of Hg

Given mass/Molar mass1.252/200.590.006mol

2 moles produce 1 mol O2

1 mol produces 1/2mol O_2

0.006 mol produces

0.006(0.5)0.003mol

how many valence electrons does sr2+ have

Answers

Answer:

8 valence electrons

Explanation:

Which reaction occurs at the anode in an electrochemical cell?
A. Zn(s) + Cu²+ (aq)
Zn²+ (aq) + Cu(s)
B. Zn(s) Zn²+ (aq) + 2e
C. Zn²+ (aq) + Cu(s)

Zn(s) + Cu²+ (aq)
OD. Zn²+ (aq) + 2e →
→ Zn(s)
SUBMIT

Answers

The reaction that occur at the anode of an electrochemical cell is Zn(s) Zn²+ (aq) + 2e. The correct option is B.

What is an electrochemoical cell?

An electrochemical cell has two eletcrodes present in an solution. The one electrode is anode where oxidation occurs and second is cathode hwere reduction occurs.

The reaction Zn(s) = Zn²+ (aq) + 2e due to oxidation chrage is added here.

Thus, the correct option is B. Zn(s) = Zn²+ (aq) + 2e.

Learn more about electrochemoical cell

https://brainly.com/question/12034258

#SPJ1

Why are elements classified?​

Answers

Because it helps us to predict the properties of the elements and their compounds based on their positions in the Periodic Table.

If you add sucrose to catalase when testing for reactivity, do you expect to see a reaction?.

Answers

There is no reaction when you add catalase to sucrose.

What is sucrose?

Sucrose is a disaccharide that consist of glucose and fructose. Both glucose and fructose are hexoses.

Owing to the fact that catalase is specific to sucrose, there is no reaction when you add catalase to sucrose.

Learn more about sucrose:https://brainly.com/question/24214907

#SPJ1

Organic compounds differ from inorganic compounds in that organic compounds generally have.

Answers

Answer:

carbon and hydrogen atoms

Concentrated HCl is 15 M (15 molar). A 500 mL quantity of this solution is diluted by adding water to give a final volume of 2.5 L. What is the molarity of the resulting solution

Answers

The molarity of the resulting solution obtained by diluting the stock solution is 3 M

Data obtained from the question Molarity of stock solution (M₁) = 15 MVolume of stock solution (V₁) = 500 mL Volume of diluted solution (V₂) = 2.5 L = 2.5 × 1000 = 2500 mL Molarity of diluted solution (M₂) =?

How to determine the molarity of diluted solution

M₁V₁ = M₂V₂

15 × 500 = M₂ × 2500

7500 = M₂ × 2500

Divide both side by 2500

M₂ = 7500 / 2500

M₂ = 3 M

Thus, the volume of the resulting solution is 3 M

Learn more about dilution:

https://brainly.com/question/15022582

#SPJ1

What is the volume of the sphere? 8 cm

Answers

given,

Radius of sphere , r = 8cm

Volume of sphere = 4/3 pi r^3

=> volume of sphere = 4/3 x 3.14 x 8 x 8 x 8 = 2143.6 cubic units

Identify the balanced chemical equation that represents a single displacement reaction.

CF 4 + 2Br 2 ⟶ CBr 4 + 2F 2
3H 2SO 4 + 2Al ⟶ Al 2(SO 4) 3 + 3H 2
CF 4 + Br 2 ⟶ CBr 4 + F 2
3H 2SO 4 + 2Al ⟶ Al 2(SO 4) 3 + H 2

Answers

3H₂SO₄ + 2Al₂(SO₄)₃  → Al₂(SO₄)₃ + 3H₂ is the balanced chemical equation that represents a single displacement reaction.

What is a balanced chemical equation?

The equation in which the number of atoms of all the molecules is equal on both sides of the equation is known as a balanced chemical equation.

3H₂SO₄ + 2Al₂(SO₄)₃  → Al₂(SO₄)₃ + 3H₂

In this type of reaction, one substance is replacing another:

A + BC  →  AC + B

In a single displacement reaction, atoms replace one another based on the activity series. Elements that are higher in the activity series. Also, if the element that is to replace the other in a compound is more reactive the reaction will occur. If it is less reactive, there will be no reation.

In the first equation, fluorine is more reactive than bromine. Therefore, bromine cannot replace bromine.

In the second equation, the displacement is between hydrogen and aluminium. Hydrogen is lower in the activity series, this implies that aluminium will replace it.

Hence, 3H₂SO₄ + 2Al₂(SO₄)₃  → Al₂(SO₄)₃ + 3H₂ is the balanced chemical equation that represents a single displacement reaction.

Learn more about the displacement reaction here:

https://brainly.com/question/15052184

#SPJ1

Perform the following operation
and express the answer in
scientific notation.
9.80x10-3 + 1.60x10-4
[ ? ]x10

Answers

Answer:

11.40x10-7

Explanation:

9.80+1.60x10-3-4

11.40x10-7

If the mass number of an atom is 29, and it has 13 protons and 13 electrons, what is the identity of this atom?

Answers

If the mass number of an atom is 29, and it has 13 protons and 13 electrons, the identity of this atom is Aluminum.

What is an atom?

An atom is the smallest indivisible particle of an element which still retains its chemical identity.

An atom consists of a nucleus surrounded by electrons. The nucleus is made up of protons and neutrons.

The identity of a chemical element is determined by its electron and proton number, which is the same for a neutral atom.

According to this question, the atom of an element has 13 protons and 13 electron. This suggests that the atom is that of Aluminum.

Learn more about atoms at: https://brainly.com/question/1566330

#SPJ1

Assume a parent isotope has a half-life of 100 million years. How old is a sample that
contains 15% of its original parent isotope?
250 million years
270 million years
200 million years
100 million year

Answers

Answer:

270 million

Explanation:

1/2 ^n  = .15            (.15 is 15% in decimal)

                    log both sides

n log (1/2) = log (.15 )

   n = 2.737 half lives

EACH half life is 100 million

      2.737 * 100 million = 273.7 million

The process of seeping of water into the ground in called​

Answers

Answer: Infiltration

Explanation: it is the process by which surface water, rainwater or snowmelt seeps into the ground

if this strand is replicated what is the complementary strand that is produced

Answers

Answer:

During DNA replication, each of the two strands that make up the double helix serves as a template from which new strands are copied. The new strand will be complementary to the parental or “old” strand. Each new double strand consists of one parental strand and one new daughter strand.

Explanation:

hope it helps you

Other Questions
Using a spatula and a balance, measure 2.50 g copper(II) chloride (CuCl). You may need to addand subtract to get exactly 2.50 g.someone help i dont get this what is the three dots(periods) ... callled? The Father of the Bride flips out when he realizes that the hot dogs and buns don'tmatch. There are 8 hot dogs in a package and 12 buns in a package. How manypacks of hot dogs and how many packs of buns do you need to purchase in order tohave the exact same number of each? Which development prompted US intervention in the 1973 Chilean coup? A. physical threats to Americans living in the country B. a desire to open lines of trade with South American countries C. President Allendes plan to nationalize US-owned companies D. opposition leader Pinochets history of cooperation with the United States explain 5 characteristics/features of the social environment. 1Select the correct answer.Can triangle A be mapped onto triangle B using rigid transformations?BA The cumulative work of many scientists can often be summarized as theories or laws. how is a theory different from a law if1(2) at the level 20= 0.94770 and 1(2) at the level 21= 096020 find the required level of mortality for the estimated value of 1(2)* =0.95656. Which is a reason why it is important to organize information before preparing a business report?. What is a client benefit of partnering with accenture's intelligent platform services (ips)? Why does ralph think that the boy he sees is ""not bill""?. What differences do you notice when you heat up the brick and the iron at same temperature? Which word best fits the connotation of the following sentence?The singers voices ________ together to create a beautiful harmony.floatedswirledmeltedblended City there are 244,000 48-year-olds. Based on the table below howmany are not expected to be alive in a year? Is the primary character in a story is protagonist Use the Distributive Property to write each expression as an equivalent expression. Then evaluate it. 3(5+1) what contribution to geometry is attributed to the work of rene descartes find the coordinate plane that represents the solution of this system y > -x - 1 y + 4 x simplify (x^3+2x-3)-(x^2-2x+4) PLEASE HELP!!! DSFVAGETRYHUJ