the game of four square on a 12 foot by 12-foot court you square is a 6foot by 6 foot what is the area if four square not including you court

Answers

Answer 1

Answer:

108 ft ^2

Step-by-step explanation:

12^2 - 6^2 = 108


Related Questions

What is the value of x for 9 the power of x minus 12 times 3 the power of x plus 27 is equal to zero

Answers

The value of x for [tex]9^x - 12(3^x) + 27[/tex] = 0 is 1.

We can factor the given expression as follows:

[tex]9^x - 123^x + 27[/tex] = 0

Rewrite 27 as [tex]3^3[/tex]:

[tex]9^x - 123^x + 3^3[/tex] = 0

Factor out the common factor of 3^x:

[tex]3^x (3^{(2x-3)} - 43^{(x-1)} + 1)[/tex] = 0

Now we can solve for x by setting each factor equal to zero:

[tex]3^x[/tex] = 0 (This has no solution since 3 to any power is always positive)

[tex]3^{(2x-3)} - 43^{(x-1)} + 1[/tex]= 0Let y = [tex]3^{(x-1)}[/tex]:y² - 4y + 1 = 0

Using the quadratic formula, we get:

y = (4 ± √(16 - 4))/2

y = 2 ± √(3)

Now substitute y back in terms of x:

[tex]3^{(x-1)}[/tex] = 2 ± √(3)

Take the natural logarithm of both sides:

(x-1)ln(3) = ln(2 ± √(3))x-1 = ln(2 ± √(3))/ln(3)x = 1 + ln(2 ± √(3))/ln(3)

Note that both solutions satisfy the original equation, but only x = 1 is a valid solution since [tex]3^x[/tex] cannot be zero.

Learn more about expressions

https://brainly.com/question/25968875

#SPJ4

Water leaks from a crack in a cone-shaped vase at a rate of 0.5 cubic inch per minute. The vase has a height of 10 inches and a diameter of 4.8 inches. How long does it take for 20% of the water to leak from the vase when it is full of water?

Answers

It will take 24.13 minutes for 20% of the water to leak from the vase when it is full of water.

How to find how long it will take for 20% of the water to leak from the vase when it is full of water?

The volume of a cone is given by the formula:

V = 1/3 πr²h

where r = 4.8/2 = 2.4 inches and h = 10 inches

Volume of vase = 1/3 * 22/7 * 2.4² * 10

Volume of vase = 19.2π in³

20% of volume will be:

20/100 * 19.2π = 3.84π in³

Rate = Volume / time

time = Volume / Rate

time = 3.84π / 0.5

time = 24.13 minutes

Learn more about volume of cone on:

https://brainly.com/question/1082469

#SPJ1

Use substitution to evaluate the integral in terms of f (x), assuming f (x) is never zero and f' (x) is continuous. Choose the correct answer. f' (x) f(x) dx = O In (|f(x)|) + C O - In (|f(x)|) + C - In (f(x)) + C O In (ƒ(x)) + C

Answers

The correct answer is O (f(x)^2) + C. Note that this expression does not match any of the answer choices provided in the question.

To evaluate the integral f'(x) f(x) dx using substitution, we can let u = f(x), so that du/dx = f'(x) and dx = du/f'(x). Substituting these expressions into the integral, we get:

∫ f'(x) f(x) dx = ∫ u du

Integrating u with respect to itself, we get:

∫ u du = (u^2)/2 + C

Substituting back for u, we get:

∫ f'(x) f(x) dx = (f(x)^2)/2 + C

Therefore, the correct answer is O (f(x)^2) + C. Note that this expression does not match any of the answer choices provided in the question.

To learn more about expression visit:

https://brainly.com/question/14083225

#SPJ11

The correct answer is O (f(x)^2) + C. Note that this expression does not match any of the answer choices provided in the question.

To evaluate the integral f'(x) f(x) dx using substitution, we can let u = f(x), so that du/dx = f'(x) and dx = du/f'(x). Substituting these expressions into the integral, we get:

∫ f'(x) f(x) dx = ∫ u du

Integrating u with respect to itself, we get:

∫ u du = (u^2)/2 + C

Substituting back for u, we get:

∫ f'(x) f(x) dx = (f(x)^2)/2 + C

Therefore, the correct answer is O (f(x)^2) + C. Note that this expression does not match any of the answer choices provided in the question.

To learn more about expression visit:

https://brainly.com/question/14083225

#SPJ11

Drag each number to the correct location on the table.
Complete a two-way frequency table using the given probability values.

Answers

The complete table as determined from the given probabilities is given below:

          X    Y   Total

A       40   28   68

B       38   54    92

Total 78   82   160

What is the probability P(A|B)?

P(A|X) means the conditional probability of A given X has occurred. In this case, 40/92 means out of 92 times X occurred, A occurred 40 times.

P(B) means the marginal probability of B, which is the total probability of B occurring regardless of whether A occurred or not. In this case, 78/160 means out of 160 trials, B occurred 78 times.

The row and column totals are calculated by adding up the corresponding values.

The grand total is the sum of all the values in the table.

Learn more about probability at: https://brainly.com/question/13604758

#SPJ1

Answer:

Step-by-step explanation:

can someone help me with this please

Answers

Answer:12.375

Step-by-step explanation:

Mutiply 4.5 x 2.75 and you'll get your answer.

find the area under the standard normal curve between z=−1.97z=−1.97 and z=−0.79z=−0.79. round your answer to four decimal places, if necessary.

Answers

The area under the standard normal curve between z = -1.97 and z = -0.79 is approximately 0.1904, rounded to four decimal places.

To find the area under the standard normal curve between z = -1.97 and z = -0.79, you will need to use a Z-table or a calculator with a normal distribution function.

1. Find the area to the left of z = -1.97 and z = -0.79 in the Z-table or using a calculator.
2. Subtract the area of z = -1.97 from the area of z = -0.79 to get the area between the two points.

Using a Z-table or calculator, you will find the areas to the left are:

- For z = -1.97, the area is 0.0244
- For z = -0.79, the area is 0.2148

Now, subtract the smaller area from the larger area:

0.2148 - 0.0244 = 0.1904

So, the area under the standard normal curve between z = -1.97 and z = -0.79 is approximately 0.1904, rounded to four decimal places.

To learn more about standard normal curve here:

brainly.com/question/30999102#

#SPJ11

which of the following is the height of cylinder, with a radius of 4.5 mm and a volume of 348.3

Answers

Step-by-step explanation:

Volume of a cylinder = pi r^2 h     <=====solve for 'h'

h = volume / (pi r^2)

  = 348.3 mm^3 / ( pi * 4.5^2)             ( I assumed the dimension mm^3 )

h = ~ 5.5 mm

1. draw the image of triangle a BC under the transformation 

Answers

Below is the answer in a geometric diagram.

How do you implement the following function using one 8x1 multiplexer, Integer F (A, B, C, D) = A'C'B+AB'C’+B’C'D+ABCD'?

Answers

To implement the given function using one 8x1 multiplexer, we first need to identify the inputs and outputs. The inputs are A, B, C, and D, and the output is F.

We can use the 8x1 multiplexer as a logic function generator by using the select inputs to choose which input is passed to the output.

To implement the given function, we can use the following steps:

1. Connect A and D to the select inputs of the multiplexer.
2. Connect B and C to the remaining two inputs of the multiplexer.
3. Set the outputs of the multiplexer as follows:
- Connect output 0 to VCC.
- Connect output 1 to B.
- Connect output 2 to A.
- Connect output 3 to BC'.
- Connect output 4 to AB.
- Connect output 5 to AC.
- Connect output 6 to B'CD.
- Connect output 7 to ABCD'.

4. Connect the multiplexer outputs to a logical OR gate to generate the final output F.

By setting the select inputs appropriately, the multiplexer will output the required terms of the function, which are then combined using the OR gate to produce the final output F.
Hi! To implement the given function F(A, B, C, D) = A'C'B + AB'C' + B'C'D + ABCD' using one 8x1 multiplexer, follow these steps:

1. Identify the input and control lines: Since it is an 8x1 multiplexer, we need three control lines. Choose A, B, and C as the control lines. The input lines will be connected based on the function.

2. Map the function to the input lines: For an 8x1 multiplexer, the inputs are connected as follows:
 - I0 = A'B'C'D'
 - I1 = A'B'C'D
 - I2 = A'B'CD'
 - I3 = A'B'CD
 - I4 = AB'C'D'
 - I5 = AB'C'D
 - I6 = ABCD'
 - I7 = ABCD

3. Connect the corresponding function terms to the input lines:
 - I0 = 0 (A'B'C'D' does not appear in the function)
 - I1 = A'C'B (A'B'C'D matches the first term)
 - I2 = 0 (A'B'CD' does not appear in the function)
 - I3 = B'C'D (A'B'CD matches the third term)
 - I4 = AB'C' (AB'C'D' matches the second term)
 - I5 = 0 (AB'C'D does not appear in the function)
 - I6 = ABCD' (ABCD' matches the fourth term)
 - I7 = 0 (ABCD does not appear in the function)

By connecting the input lines according to the function terms and using A, B, and C as the control lines, you can implement the given function F(A, B, C, D) using one 8x1 multiplexer.

Visit here to learn more about multiplexer brainly.com/question/15052768

#SPJ11

use a linear approximation (or differentials) to estimate the given number. (round your answer to two decimal places.) ( 32.05 ) 4 / 5 (32.05)4/5

Answers

Using linear approximation, (32.05)^(4/5) is equal to 16.08 (rounded to two decimal places).

To use linear approximation (or differentials) to estimate (32.05)^(4/5), we'll first find the function and its derivative, then choose a nearby value to approximate from.
1. Define the function: f(x) = x^(4/5)
2. Find the derivative: f'(x) = (4/5)x^(-1/5)
Now, let's choose a nearby value that is easy to work with. In this case, we'll choose x=32.
3. Evaluate f(32) and f'(32):
  f(32) = 32^(4/5) = 16
  f'(32) = (4/5)(32)^(-1/5) = (4/5)(2) = 8/5
Now we can use linear approximation:
4. Δx = 32.05 - 32 = 0.05
5. Δf ≈ f'(32) × Δx = (8/5) × 0.05 = 0.08
Lastly, approximate the value:
6. f(32.05) ≈ f(32) + Δf ≈ 16 + 0.08 = 16.08

Learn more about derivative here:

https://brainly.com/question/24043123

#SPJ11

Graph the solution of this inequality:

4.5x - 100 > 125

Use the number line pictured below.

Answers

Answer:

  see attached

Step-by-step explanation:

You want to graph the solution to the inequality 4.5x -100 > 125 on the number line.

Solution

The inequality is solved the same way you would solve a 2-step equation:

  4.5x -100 > 125 . . . . . . given

  4.5x > 225 . . . . . . add 100 to both sides to eliminate unwanted constant

  x > 50 . . . . . . . divide both sides by 4.5 to eliminate unwanted coefficient

Graph

Values of x that are greater than 50 are to the right of 50 on the number line. An open circle is used at x=50, because x=50 is not part of the solution.

Find the first-quandrant area inside the rose r = 3 sin 20 but outside the circle r = 2. (A) 0.393(B) 0.554(C) 0.790.(D) 1.328. (E) 2.657

Answers

The 0.790 is first-quandrant area inside the rose r = 3 sin 20 but outside the circle r = 2. The correct answer is (C).

To find the area inside the rose r = 3 sin 2θ but outside the circle r = 2 in the first quadrant, we need to evaluate the integral:A = ∫(θ=0 to π/4) ∫(r=2 to 3sin2θ) r dr dθUsing polar coordinates, we can rewrite the integral as:A = ∫(θ=0 to π/4) [ (3sin2θ)^2 / 2 - 2^2 / 2 ] dθSimplifying the integrand, we get:A = ∫(θ=0 to π/4) [ (9sin^4 2θ - 4) / 2 ] dθWe can then use the double-angle identity for sine to get:A = 4 ∫(θ=0 to π/4) [ (9/8)(1 - cos 4θ) - 1/2 ] dθSimplifying further, we get:A = 9/2 ∫(θ=0 to π/4) (1 - cos 4θ) dθ - 2πIntegrating, we get:A = 9/8 sin 4θ - 1/2 θ |(θ=0 to π/4) - 2πPlugging in the limits of integration, we get:A = 0.790Therefore, the answer is (C) 0.790.

For more such question on quandrant

https://brainly.com/question/25038683

#SPJ11

Find the measure of angle 8.

Answers

The measure of angle 8, based on the definition of a corresponding angle is determined as: 98 degrees.

How to Find the Measure of an Angle?

From the image given, angle 8 and 98 degrees are corresponding angles. Corresponding angles can be defined as angles that lie on the same side of a transversal that crosses two parallel lines and also occupy similar corner along the transversal.

Corresponding angles are said to be equal to each other. This means they are congruent.

Therefore, the measure of angle 8 is equal to 98 degrees.

Learn more about the Corresponding angles on:

https://brainly.com/question/28793685

#SPJ1


Help me pls

2. Suppose that in her first month Yaseen is able to create 15 kits. How much should she charge
for each of these kits based on her supply function? How much should she charge for each of
these kits based on her demand function? Show your work.

Answers

The amount that should be charged based on the demand function will be 144.5

How to calculate the value

Based on the information given, the total demand quantity is between 0 and 85, arıd demand can never be negative.

Supply: Supply se always between 0 and 100. He can create and supply 100 product quantities per month.

2. (1) Supply function: charge · 0.01 × (15²) + 0.5 × 15 = 9.75

Demand function: charge = 0.02 » (15 – 100)² = 144.5

Learn more about supply on

https://brainly.com/question/1222851

#SPJ1

find the volume of the region e bounded by the functions z=0 , z=1 and x^2 y^2 z^2=4

Answers

The volume of the region E is 2([tex]2 - \sqrt(2)[/tex]).

How to find the volume of the region e bounded by the functions?

The region E is bounded by the plane z = 0, the plane z = 1, and the surface[tex]x^2y^2z^2 = 4[/tex]. To find its volume, we can use a triple integral over the region:

V = ∭E dV

Since the region is bounded by z = 0 and z = 1, we can integrate over z first and then over the region in the xy-plane:

V = ∫∫∫E dV = ∫∫R ∫[tex]0^1[/tex] dz dA

where R is the region in the xy-plane defined by [tex]x^2y^2z^2 = 4[/tex]. To find the limits of integration for the integral over R, we can solve for one of the variables in terms of the other two.

For example, solving for z in terms of x and y gives:

z = 2/(xy)

Since z is between 0 and 1, we have:

0 ≤ z ≤ 1 ⇔ xy ≥ 2

So the region R is the set of points in the xy-plane where xy ≥ 2. This is a region in the first and third quadrants, bounded by the hyperbola xy = 2.

To find the limits of integration for the double integral, we can integrate over y first, since the limits of integration for y depend on x.

For a fixed value of x, the y-limits are given by the intersection of the hyperbola xy = 2 with the line x = const. This intersection occurs at y = 2/x, so the limits of integration for y are:

2/x ≤ y ≤ ∞

To find the limits of integration for x, we can note that the hyperbola xy = 2 is symmetric about the line y = x.

So we can integrate over the region where [tex]x \geq \sqrt(2)[/tex] and then multiply the result by 2. Thus, the limits of integration for x are:

[tex]\sqrt(2)[/tex] ≤ x ≤ ∞

Putting everything together, we have:

V =[tex]2\int \sqrt(2)\infty \int 2/x \infty \int 0^1[/tex]dz dy dx

Integrating over z gives:

V = [tex]2\int \sqrt(2) \infty \int 2/x \infty z|0^1 dy dx = 2\int \sqrt(2)\infty \int 2/x \infty dy dx[/tex]

Integrating over y gives:

[tex]V = 2\int \sqrt(2)\infty [y]2/x\infty dx = 2\int \sqrt(2)\infty (2/x - 2/\sqrt(2)) dx[/tex]

[tex]= 4\int \sqrt(2)\infty (1/x - 1/\sqrt(2)) dx[/tex]

= [tex]4(ln(x) - \sqrt(2) ln(x)|\sqrt(2)\infty)[/tex]

= [tex]4(ln(\sqrt(2)) - \sqrt(2) ln(\sqrt(2))) = 4(1 - \sqrt(2)/2) = 2(2 - \sqrt(2))[/tex]

Therefore, the volume of the region E is 2([tex]2 - \sqrt(2)[/tex]).

Learn more about volume of the region

brainly.com/question/15166233

#SPJ11

( 1 point) Let an-- . Let an = 13/(n +1)^7/2 - 13/n^7/2 Let Sn = n ∑n=1 an(a) Find S3 S3=(b) Find a simplified formula for Sn Sn= (c) Use part (b) to find infinity ∑n=1 an. If it diverges, write "infinity" or "-infinity

Answers

(a) The value of S3 = (13/2 - 13/3√2 + 13/4√3) ≈ 6.695

(b) The value of using S3 is Sn = 13(1 - 1/2√2 + 1/3√3 - ... - 1/(n+1)√(n+1))

(c) The series ∑n=1 an converges, and its value is approximately 25.506.

In part (a), we are given a sequence an and asked to find S3, which is the sum of the first three terms of the sequence. We substitute n=1, 2, and 3 in the formula for an and add the resulting values to get S3 = -194.67.

In part (b), we are asked to find a simplified formula for Sn, which is the sum of the first n terms of the sequence. We notice that an can be written as 13 times the difference between two terms involving square roots of (n+1) and n. Using algebraic manipulation, we obtain Sn = 13[(1/√2) - (1/√{n+1})], which simplifies to Sn = 13/√2 - 13/√{n+1}.

In part (c), we use the formula obtained in part (b) to find the sum of the infinite series ∑n=1 an. As n approaches infinity, the second term in the formula approaches zero, so the sum approaches 13/√2. Therefore, the sum converges to a finite value of approximately 9.19.

To learn more about simplified formula, here

https://brainly.com/question/19722071

#SPJ4

In the regression of textbook retail price (PRICE) on number of pages in the book (LENGTH), you estimate the following equation: PRICE = $10.40 + $0.03LENGTH What is the interpretation of the coefficient $0.03? Select one: a. As the estimated length of the book increases by one page, the estimated price increases by $0.03. b. None of the interpretations are correct c. As the length of the book increases by one page, the estimated price increases by $0.03 on average. d. As the length of the book increases by one page, the price increases by $0.03. e. As the estimated length of the book increases by one page, the price increases by $0.03.

Answers

The correct answer is c.

How to interpret the coefficient?

The interpretation of the coefficient $0.03 in the regression of textbook retail price (PRICE) on number of pages in the book (LENGTH) is: As the length of the book increases by one page, the estimated price increases by $0.03 on average. Therefore, the correct answer is c.

Learn more about Regression analysis

brainly.com/question/30011167

#SPJ11

W is not a subspace of the vector space. Verify this by giving a specific example that violates the test for a vector subspace (Theorem 4.5).
W is the set of all vectors in R3 whose components are nonnegative.

Answers

The resulting vector (0, 1, 0) is not in W because it has a negative component. This violation of closure under vector addition shows that W is not a subspace of the vector space R3.

To show that W is not a subspace of the vector space, we need to find a specific example that violates the test for a vector subspace (Theorem 4.5).

Theorem 4.5 states that for a set to be a subspace, it must satisfy three conditions:

1. The set contains the zero vector.
2. The set is closed under vector addition.
3. The set is closed under scalar multiplication.

Let's consider the second condition. To violate it, we need to find two vectors in W whose sum is not in W.

Let u = (1, 2, 3) and v = (4, 5, 6). Both u and v have nonnegative components, so they belong to W.

However, their sum u + v = (5, 7, 9) does not have nonnegative components, so it does not belong to W. Therefore, W is not closed under vector addition and is not a subspace of the vector space.

In summary, we have shown that W is not a subspace of the vector space by providing a specific example that violates the test for a vector subspace.

Learn more about scalar multiplication here: brainly.com/question/8349166

#SPJ11

I NEED HELP ON THIS ASAP!! PLEASE, IT'S DUE TONIGHT!

Answers

Answer:

Step-by-step explanation:

The graph of � = � ( � ) y=f(x) is shown below. Find all values of � x for which � ( � ) < 0 f(x)<0.

Answers

Note that where the above graph is given, the values of x where f(x) = 0 are:
x =2 and

x= 4.

What is the explanation for the above?

The value of x where fx) = 0 are the point on the curve where the curve intersects the x-axis.

those points are :

2 and 4.

Note that his is a downward facing parabola or a concave downward curve because of it's u shape.


Examples of real-life downward-facing parabolas are:

The fountain's water shoots into the air and returns in a parabolic route.

A parabolic route is likewise followed by a ball thrown into the air. This was proved by Galileo.

Anyone who has ridden a roller coaster is also familiar with the rise and fall caused by the track's parabolas.

Learn more about graphs:
https://brainly.com/question/17267403
#SPJ1

Full Question:

See the attached

You conduct a Durbin-Watson test. Your test stat is 1.58. The appropriate DW critical values with a significance level of 5% are d_{L}=0.8 and 2d_{U}=1.3. What is the conclusion of the Durbin-Watson test? Select one: O a. Reject the null hypothesis, heteroskedasticity exists O b. Reject the null hypothesis, autocorrelation exists O c. Do not reject the null hypothesis, there is insufficient evidence of autocorrelation Od. Do not reject the null hypothesis, there is insufficient evidence of heteroskedasticity Oe. The test is inconclusive

Answers

The conclusion of the Durbin-Watson test is that the test is inconclusive. Therefore option e is correct.

To determine the conclusion of the Durbin-Watson test:

Follow these steps:

STEP 1: Compare the test statistic (1.58) to the critical values (d_L=0.8 and 2d_U=1.3).
STEP 2: If the test statistic is less than d_L or greater than 4-d_L, reject the null hypothesis and conclude that autocorrelation exists.
STEP 3: If the test statistic is between d_U and 4-d_U, do not reject the null hypothesis and conclude that there is insufficient evidence of autocorrelation.
STEP 4: If the test statistic is between d_L and d_U or between (4-d_U) and (4-d_L), the test is inconclusive.

In this case, the test statistic (1.58) is between d_L (0.8) and 2d_U (1.3).

Therefore, the conclusion of the Durbin-Watson test is that the test is inconclusive (Option e).

To know more about  Durbin-Watson test:

https://brainly.com/question/31317514

#SPJ11

2. show that if a group g has an element a which has precisely two conjugates, then g has a nontrivial proper normal subgroup

Answers

We have shown that if[tex]$a$[/tex]has precisely two conjugates in [tex]$G$[/tex], then [tex]$G$[/tex] has a nontrivial proper normal subgroup.

Let [tex]$a\in G$[/tex] have precisely two conjugates, say [tex]$a$[/tex] and [tex]$gag^{-1}$[/tex], where [tex]$g\in G$[/tex] and [tex]$g\notin C_G(a)$[/tex]. Let [tex]$H=\langle a\rangle\leq G$[/tex] be the subgroup generated by [tex]$a$[/tex]. Since [tex]$gag^{-1}$[/tex] is a conjugate of [tex]$a$[/tex], we have [tex]$gag^{-1}=a^n$[/tex] for some [tex]$n\in\mathbb{Z}$[/tex]. This implies that [tex]$g=a^nga^{-n}\in Hg$[/tex]. Thus, [tex]$Hg$[/tex] contains at least two distinct cosets [tex]$H$[/tex]and [tex]$Ha^nga^{-n}$[/tex].

Now consider the set [tex]$K={g\in G\mid gHg^{-1}=H}$[/tex], which is known as the normalizer of [tex]$H$[/tex] in[tex]$G$[/tex]. Note that [tex]$H\subseteq K$[/tex] since [tex]$aHa^{-1}=H$[/tex] and [tex]$a\in K$[/tex]. Also, [tex]$g\in K$[/tex] if and only if [tex]$gHg^{-1}=H$[/tex], which is equivalent to [tex]$gag^{-1}=a^n$[/tex] for some [tex]$n\in\mathbb{Z}$[/tex], which in turn is equivalent to [tex]$g\in Hg\cup Ha^nga^{-n}$[/tex].

Since [tex]$g\notin C_G(a)$[/tex], we have [tex]$|K| > |C_G(a)|\geq H$[/tex], and so [tex]$|G/K|\leq |G/H|\leq 2$[/tex]. Therefore, either [tex]$K=G$[/tex] or [tex]$K=H$[/tex], and in either case, we have [tex]$K\trianglelefteq G$[/tex] and [tex]$K\neq G$[/tex], since[tex]$g\notin K$[/tex].

Thus, we have shown that if [tex]$a$[/tex] has precisely two conjugates in [tex]$G$[/tex], then [tex]$G$[/tex] has a nontrivial proper normal subgroup.

To learn more about conjugates visit:

https://brainly.com/question/28175934

#SPJ11

a pillow is in the shape of a regular pentagon. it is made from 5 pieces of fabric that are congruent triangles. each triangle has an area of 10 square inches. what is the area of the pillow?

Answers

The area of the pillow is 50 square inches.

To find the area of the pillow shaped as a regular pentagon made from 5 congruent triangles, each with an area of 10 square inches, follow these steps:

1. Identify the number of triangles: There are 5 congruent triangles in the pentagon.

2. Determine the area of each triangle: Each triangle has an area of 10 square inches.

3. Calculate the total area: Multiply the number of triangles (5) by the area of each triangle (10 square inches).

5 triangles * 10 square inches/triangle = 50 square inches

So, the area of the pillow is 50 square inches.

Learn more about triangle here,

https://brainly.com/question/31573578

#SPJ11

Let X be a random variable with pdf given by f(x) = 2x for 0 < x < 1 and f(x) = 0 otherwise. a. Find P(X > 1/2). b. Find P(X > 1/2 X > 1/4).

Answers

a. The probability that X is greater than 1/2 is 3/4.

b. The probability that X is greater than 1/2 given that it is greater than 1/4 is 4/5.

How to find P(X > 1/2)?

a. To find P(X > 1/2), we need to integrate the pdf f(x) from x=1/2 to x=1, since this is the range of x values where X is greater than 1/2:

P(X > 1/2) = ∫(1/2 to 1) f(x) dx = ∫(1/2 to 1) 2x dx

Evaluating the integral:

P(X > 1/2) = [tex][x^2]_{(1/2 to 1)} = 1 - (1/2)^2[/tex] = 3/4

Therefore, the probability that X is greater than 1/2 is 3/4.

How to find P(X > 1/2 X > 1/4)?

b. To find P(X > 1/2 X > 1/4), we need to use the conditional probability formula:

P(X > 1/2 X > 1/4) = P(X > 1/2 and X > 1/4) / P(X > 1/4)

We can simplify the numerator as follows:

P(X > 1/2 and X > 1/4) = P(X > 1/2) = 3/4

We already calculated P(X > 1/2) in part (a). To find the denominator, we integrate the pdf f(x) from x=1/4 to x=1:

P(X > 1/4) = ∫(1/4 to 1) f(x) dx = ∫(1/4 to 1) 2x dx

Evaluating the integral:

P(X > 1/4) = [tex][x^2]_{(1/4 to 1) }[/tex]= 1 - (1/4)^2 = 15/16

Plugging these values into the conditional probability formula:

P(X > 1/2 X > 1/4) = (3/4) / (15/16) = 4/5

Therefore, the probability that X is greater than 1/2 given that it is greater than 1/4 is 4/5.

Learn more about pdf

brainly.com/question/31064509

#SPJ11

a. The probability that X is greater than 1/2 is 3/4.

b. The probability that X is greater than 1/2 given that it is greater than 1/4 is 4/5.

How to find P(X > 1/2)?

a. To find P(X > 1/2), we need to integrate the pdf f(x) from x=1/2 to x=1, since this is the range of x values where X is greater than 1/2:

P(X > 1/2) = ∫(1/2 to 1) f(x) dx = ∫(1/2 to 1) 2x dx

Evaluating the integral:

P(X > 1/2) = [tex][x^2]_{(1/2 to 1)} = 1 - (1/2)^2[/tex] = 3/4

Therefore, the probability that X is greater than 1/2 is 3/4.

How to find P(X > 1/2 X > 1/4)?

b. To find P(X > 1/2 X > 1/4), we need to use the conditional probability formula:

P(X > 1/2 X > 1/4) = P(X > 1/2 and X > 1/4) / P(X > 1/4)

We can simplify the numerator as follows:

P(X > 1/2 and X > 1/4) = P(X > 1/2) = 3/4

We already calculated P(X > 1/2) in part (a). To find the denominator, we integrate the pdf f(x) from x=1/4 to x=1:

P(X > 1/4) = ∫(1/4 to 1) f(x) dx = ∫(1/4 to 1) 2x dx

Evaluating the integral:

P(X > 1/4) = [tex][x^2]_{(1/4 to 1) }[/tex]= 1 - (1/4)^2 = 15/16

Plugging these values into the conditional probability formula:

P(X > 1/2 X > 1/4) = (3/4) / (15/16) = 4/5

Therefore, the probability that X is greater than 1/2 given that it is greater than 1/4 is 4/5.

Learn more about pdf

brainly.com/question/31064509

#SPJ11

show that 3 (4n 5) for all natural numbers n.

Answers

Hence proved that 3 can divides (4n + 5) for all natural numbers n.

To show that 3 divides (4n + 5) for all natural numbers n, we need to show that there exists some integer k such that:

4n + 5 = 3k

We can rearrange this equation as:

4n = 3k - 5

Since 3k - 5 is an odd number (the difference of an odd multiple of 3 and an odd number), 4n must be an even number. This means that n is an even number, since the product of an even number and an odd number is always even.

We can then write n as:

n = 2m

Substituting this into the original equation, we get:

4(2m) + 5 = 8m + 5 = 3(2m + 1)

So we can take k = 8m + 5/3 as an integer solution for all natural numbers n.

Learn more about natural numbers here:

https://brainly.com/question/17429689

#SPJ11

Hence proved that 3 can divides (4n + 5) for all natural numbers n.

To show that 3 divides (4n + 5) for all natural numbers n, we need to show that there exists some integer k such that:

4n + 5 = 3k

We can rearrange this equation as:

4n = 3k - 5

Since 3k - 5 is an odd number (the difference of an odd multiple of 3 and an odd number), 4n must be an even number. This means that n is an even number, since the product of an even number and an odd number is always even.

We can then write n as:

n = 2m

Substituting this into the original equation, we get:

4(2m) + 5 = 8m + 5 = 3(2m + 1)

So we can take k = 8m + 5/3 as an integer solution for all natural numbers n.

Learn more about natural numbers here:

https://brainly.com/question/17429689

#SPJ11

state whether the sequence an=(nn−6)7n converges and, if it does, find the limit.

Answers

Specifically, we can consider the limit of the ratio:

To determine whether the sequence [tex]$a_n = \left( \frac{n}{n-6} \right)^{7n}$[/tex] converges or not, we can use the following steps:

Firstly, we can take the natural logarithm of both sides of [tex]$a_n$[/tex] to simplify the expression. Using the property [tex]$\ln(x^y) = y \ln(x)$[/tex], we have:

[tex]$$\ln \left(a_n\right)=7 n \ln \left(\frac{n}{n-6}\right)$$[/tex]

Next, we can use algebraic manipulation to rewrite the expression inside the logarithm.

Starting with the definition of the logarithm,

[tex]$$\ln \left(\frac{n}{n-6}\right)=\ln (n)-\ln (n-6)$$[/tex]

Using this identity, we can rewrite [tex]$\$ \backslash \ln \left(a_{-} n\right) \$$[/tex] as:

[tex]$$\ln \left(a_n\right)=7 n \ln (n)-7 n \ln (n-6)$$[/tex]

Now, we can use the limit comparison test to determine whether [tex]$\ln(a_n)$[/tex] converges or diverges. Specifically, we will compare [tex]$\ln(a_n)$[/tex] to a multiple of [tex]$\ln(n)$[/tex] as [tex]$n$[/tex] approaches infinity.

We can use L'Hopital's rule to find the limit of the ratio:

[tex]$$\lim _{n \rightarrow \infty} \frac{\ln (n-6)}{\ln (n)}=\lim _{n \rightarrow \infty} \frac{\frac{1}{n-6}}{\frac{1}{n}}=\lim _{n \rightarrow \infty} \frac{n}{n-6}=1$$[/tex]

Since this limit exists and is nonzero, we can conclude that [tex]$\$ \backslash \ln \left(a_{-} n\right) \$$[/tex] and [tex]$\$ \backslash \ln (n) \$$[/tex] have the same behavior as [tex]$\$ n \$$[/tex] approaches infinity. Therefore, we can use the limit comparison test with [tex]$\$ b_{-} n=\backslash \ln (n) \$$[/tex], which we know diverges to infinity as [tex]$\$ n \$$[/tex] approaches infinity.

Specifically, we can consider the limit of the ratio:

[tex]$$\lim _{n \rightarrow \infty} \frac{\ln \left(a_n\right)}{\ln (n)}=\lim _{n \rightarrow \infty} \frac{7 n \ln (n)-7 n \ln (n-6)}{\ln (n)}$$[/tex]

Using L'Hopital's rule again, we can simplify this limit as:

[tex]$$\lim _{n \rightarrow \infty} \frac{7 n}{n} \cdot \frac{\ln (n)}{\ln (n)}-\frac{7 n}{n-6} \cdot \frac{\ln (n-6)}{\ln (n)}=7-\lim _{n \rightarrow \infty} \frac{7 n}{n-6} \cdot \frac{\ln (n-6)}{\ln (n)}$$[/tex]

We already know from our previous calculation that the limit of the fraction [tex]$\$ \backslash f r a c\{\backslash \ln (n-6)\}$[/tex] [tex]$\{\ln (\mathrm{n})\} \$$[/tex] is 1 as [tex]$\$ n \$$[/tex] approaches infinity. Therefore, the entire limit can be simplified as:

[tex]$$\lim _{n \rightarrow \infty} \frac{7 n}{n-6}=7$$[/tex]

To learn more about approaches visit:

https://brainly.com/question/13443204

#SPJ11

what is the constraint for node 8? b) the constraint x36 x38 − x13 = 0 corresponds to which node(s)?

Answers

The constraint for node 8 is not provided in the given information. The constraint x36 x38 − x13 = 0 corresponds to nodes 36, 38, and 13 in the network.

The constraint x36 x38 − x13 = 0 involves three variables: x36, x38, and x13.

The nodes in the network are typically represented by variables, where each node has a corresponding variable associated with it.

The given constraint involves the variables x36, x38, and x13, which means that it corresponds to nodes 36, 38, and 13 in the network.

The constraint indicates that the product of the values of x36 and x38 should be equal to the value of x13 for the constraint to be satisfied.

However, the constraint does not provide any information about the constraint for node 8, as it is not mentioned in the given information.

Therefore, the constraint x36 x38 − x13 = 0 corresponds to nodes 36, 38, and 13 in the network, but no information is available for the constraint for node 8.

To learn more about constraint here:

brainly.com/question/171568483

#SPJ11

Show that A is an eigenvalue of A and find one eigenvector v corresponding to this eigenvalue
A = 8 5
2 -1 , λ = 9
v = ?

Answers

Av1 = 4v1 and Av2 = 9v2, λ = 9 is indeed an eigenvalue of A and v2 = {0, 1} is an eigenvector corresponding to this eigenvalue.

How to show that λ = 9 is an eigenvalue of A?

To show that λ = 9 is an eigenvalue of A = {{8, 5}, {2, -1}}, we need to find a non-zero vector v such that Av = λv.

We have A = {{8, 5}, {2, -1}} and λ = 9. Let v = {x, y} be an eigenvector of A corresponding to the eigenvalue λ. Then we have:

Av = λv

{{8, 5}, {2, -1}} {x, y} = 9 {x, y}

{8x + 5y, 2x - y} = {9x, 9y}

Equating corresponding entries, we get two equations:

8x + 5y = 9x

2x - y = 9y

Simplifying these equations, we get:

y = 4x/5

y = -2x/7

Setting these two expressions for y equal to each other, we get:

4x/5 = -2x/7

x = 0 or y = 0

If x = 0, then y can be any non-zero number. If y = 0, then x must be 0 as well, since we are looking for a non-zero vector v. Therefore, two eigenvectors corresponding to λ = 9 are:

v1 = {5, -7}

v2 = {0, 1}

To verify that λ = 9 is an eigenvalue of A, we can calculate Av1 and Av2 and check if they are equal to 9v1 and 9v2, respectively:

Av1 = {{8, 5}, {2, -1}} {5, -7} = {20, -28} = 4 {5, -7} = 4v1

Av2 = {{8, 5}, {2, -1}} {0, 1} = {5, -2} = 9 {0, 1} = 9v2

Since Av1 = 4v1 and Av2 = 9v2, λ = 9 is indeed an eigenvalue of A and v2 = {0, 1} is an eigenvector corresponding to this eigenvalue.

Learn more about eigenvector

brainly.com/question/31013028

#SPJ11

find the counterclockwise circulation and outward flux of the field f=4xyi 4y2j around and over the boundary of the region c enclosed by the curves y=x2 and y=x in the first quadrant.

Answers

The counterclockwise circulation of the field F around the boundary of the region C is given by 2x + 4tx⁴, and the outward flux of F across the boundary of C is zero.

The counterclockwise circulation of the field F=4xyi + 4y^2j around and over the boundary of the region C enclosed by the curves y=x^2 and y=x in the first quadrant is a line integral of the field F along the closed curve C. The outward flux of the field F across the boundary of C can also be calculated as a surface integral over the region C.

To calculate the counterclockwise circulation of the field F around the boundary of C, we can parametrize the curve C as a vector function r(t) = ti + ti^2j, where t varies from 0 to 1. The derivative of r(t) with respect to t, dr/dt, gives us the tangent vector to the curve C.

dr/dt = i + 2tj

Next, we can calculate the dot product of the field F with dr/dt:

F · dr/dt = (4xyi + 4y^2j) · (i + 2tj)

= 4xt + 8ty^2

Substituting y = x^2 (since the curve C is y=x^2), we get:

F · dr/dt = 4xt + 8t(x^2)^2

= 4xt + 8tx⁴

To find the counterclockwise circulation, we integrate F · dr/dt with respect to t from 0 to 1:

∮ F · dr = ∫(0 to 1) (4xt + 8tx⁴) dt

= 4x(1/2)t² + 8tx^4(1/2)t² evaluated from 0 to 1

= 4x(1/2)(1)² + 8tx⁴(1/2)(1)² - 4x(1/2)(0)² - 8tx⁴(1/2)(0)²

= 2x + 4tx⁴

Next, to calculate the outward flux of F across the boundary of C, we can use Green's theorem, which relates the counterclockwise circulation of a field around a closed curve to the outward flux of the curl of the field across the enclosed region.

The curl of F is given by:

curl F = (∂Fy/∂x - ∂Fx/∂y)k

= (0 - 0)k

= 0

Since the curl of F is zero, the outward flux of F across the boundary of C is also zero. Therefore,

The counterclockwise circulation of the field F around the boundary of the region C is 2x + 4tx⁴, and the outward flux of F across the boundary of C is zero.

THEREFORE, the counterclockwise circulation of the field F around the boundary of the region C is given by 2x + 4tx⁴, and the outward flux of F across the boundary of C is zero

To learn more about counterclockwise here:

brainly.com/question/29971286#

#SPJ11

Suppose that 70?% of all tax returns lead to a refund. A random sample of 100 tax returns is taken.
a. What is the mean of the distribution of the sample proportion of returns leading to? refunds?
b. What is the variance of the sample? proportion?
c. What is the standard error of the sample? proportion?
d. What is the probability that the sample proportion exceeds 0.80??

Answers

The following parts can be answered by the concept from Probability.

a. The mean of the sample proportion is also 0.70.

b. The variance of the sample = (0.70(1-0.70))/100 = 0.0021

c. The standard error of the sample is 0.0458

d. The probability that the sample proportion exceeds 0.80 is  2.18

a. The mean of the distribution of the sample proportion of returns leading to refunds can be found using the formula:
mean = p = 0.70, where p is the population proportion of returns leading to refunds.
Therefore, the mean of the sample proportion is also 0.70.

b. The variance of the sample proportion can be found using the formula:
variance = (p(1-p))/n, where n is the sample size.
Substituting the given values, we get:
variance = (0.70(1-0.70))/100 = 0.0021

c. The standard error of the sample proportion can be found using the formula:
standard error = sqrt(variance)
Substituting the calculated variance value, we get:
standard error = √(0.0021) = 0.0458

d. To find the probability that the sample proportion exceeds 0.80, we need to standardize the sample proportion using the formula:
z = (sample proportion - population proportion) / standard error
Substituting the given values, we get:
z = (0.80 - 0.70) / 0.0458 = 2.18

Using a standard normal distribution table or calculator, we can find the probability of getting a z-score of 2.18 or higher, which is approximately 0.015 or 1.5%. Therefore, the probability that the sample proportion exceeds 0.80 is 0.015 or 1.5%.

To learn more about Probability here:

brainly.com/question/30034780#

#SPJ11

Other Questions
The farm bill that passed the U.S. Congress in 2007 contained subsidies of $289 billion for the next 10 years. This is an example of Multiple Choice an ad valorem tariff. 0 a specific tariff. 0 a subsidy a government bailout. Prev 1015 H Next > if the future value of an annuity due is $26,000 and the future value of an ordinary annuity is $23,000 (they are otherwise identical), what is the implied discount rate? The following table lists several corporate bonds issued during a particular quarter. Company AT&T Bank of General Goldman America Electric Sachs Verizon Wells Fargo Time to Maturity (years) 10 10 38 87 Annual Rate (%) 2.40 2.40 3.00 5.25 5.255.15 5.15 6.15 2.50 If the General Electric bonds you purchased had paid you a total of $6,630 at maturity, how much did you originally invest? (Round your answer to the nearest dollar.) $ ______ Read the passage from "A World of Animals." Bugs and insects are part of the largest group of animals on our planet. This group is invertebrates, which are animals that do not have backbones. It makes up more than 97 percent of the species of animals. Most animals in this group have antennas, wings, and six legs. In addition to insects, this group includes worms and sponges. Mark this and return 4 Which is the main idea? O Bugs and insects are invertebrates. O The largest group of animals is invertebrates. Invertebrates have antennas and wings. Worms and sponges are invertebrates. Save and Exit Next Submit When glucose is metabolized to lactate in skeletal muscle, how is ATP synthesized?A. Substrate-level phosphorylationB. Oxidative phosphorylationC. Both oxidative and substrate-level phosphorylation Why is it essential that the reduced TTC be insoluble? Why is there lessconcern about the solubility of the oxidized form of TTC? The garment factory plans to make 690 sets of garments. It has been done for 5 days, with an average of 75 sets per day. The rest needs to be completed in 2.5 days, how many sets are done on average per day (step-by-step answer) the tires of a car make 67 revolutions as the car reduces its speed uniformly from 85.0 km/h to 63.0 km/h. the tires have a diameter of 0.90 m.(a) what was the angular acceleration of the tires? If the car continues to decelerate at this rate,(b) how much more time is required for it to stop, and (c) how far does it go? A company needs to deliver product to each of their 5 stores around the Dallas, TX area. Driving distances between the stores are shown below. Find a route for the driver to follow, returning to the distribution center in Fort Worth: a. Using Nearest Neighbor starting in Fort Worth b. Using Repeated Nearest Neighbor Use the specified row transformation to change the matrix.-4 times row 1 added to row 2What is the resulting matrix?23682384 what is the overall thickness (to the nearest 50 ft) of the kayenta formation (red) on the western side of the profile? Strategy formulation and execution is ultimately a service to:A. CustomersB. EmployeesC. ShareholdersD. StakeholdersAmazon's strategy involves offering expanded variety but at very competitive prices. This is primarily achieved throughA. Economies of scope and scaleB. Economies of scale aloneC. Economies of scope aloneD. Focus on international markets phet circuit lab pls help 1. osha exempted scientific diving from commercial diving regulations in ____. the exemption can be found in ________ of the osha regulations. how to find the powers of an integer using a loop in java The judge awarded the honors _____ the artists using an abstract style. To or too what capacitor in series with a 100 resistor and a 23 mh inductor will give a resonance frequency of 900 hz ? express your answer in microfarads. I NEED HELP ON THIS ASAP! PLEASE, IT'S DUE TONIGHT!!!! Asociologist is studying influences on family size. He finds pairs of sisters, both of whom are married, and determines for each sister whether she has 0, 1, or 2 or more children. He wants to compare older and younger sisters Part A If a single transition occurs in a codon that specifies phenylalanine. what amino acids can be specified by the mutated sequence? Enter your answer as the single (capital) letter amino acid abbreviations with a plus sign (+) and no spaces between adjacent amino acids. For example: A+F+G Part B If a single transversion occurs in a codon that specifies phenylalanine, what amino acids can be specified by the mutated sequence? Enter your answer as the single (capital) letter amino acid abbreviations with a plus sign (+) and no spaces between adjacent amino acids. For example: A+F+G