Answer:
The initial E° for the second cell is the same as for the first cell.
Explanation:
Because the overall chemical reaction that occurs in the cell does not change.
The first galvanic cell generated the cell potential of +1.10 V. The second galvanic cell generates the same cell potential because the overall cell reaction remains the same.
What is a galvanic cell?The galvanic cell is given as the electrochemical cell that generates the exchange of chemical and electrical energy.
The cell potential is described as the rate of reaction with the difference in the potential of the cathode and the anode.
The reduction and the oxidation potential are governed by the number of electrons transferred in the chemical reaction.
In the second galvanic cell, the number of electrons transferred from the copper electrode will be equivalent to the first electrode, as the chemical reaction is the same. Thus, the cell potential of the second galvanic cell will be the same as the first cell.
Learn more about galvanic cell, here:
https://brainly.com/question/25606438
Examine the food chain below: In this specific food chain, the _______ eats plants for food. A. caterpillar B. sunshine C. bobcat D. leaf
How much energy required to raise the temperature of lead by the same degrees.
Answer:
If a one kilogram block of lead absorbs 2,000 J of energy then the temperature rise will be larger. If 1,000 J of heat is absorbed by a 2 kg block of lead then the temperature of the block doesn't rise as much since the energy is shared between more particles.
Explanation:
Suppose the galvanic cell sketched below is powered by the following reaction:
Mg(s)+Zn(NO3)2(aq) → Mg(NO3)2(aq)+Zn(s)
Explanation:Mg(s)+Zn(NO3)2(aq) → Mg(NO3)2(aq)+Zn(s)
What is the concentration of hydrogen ions in a solution with a pH of 2.36?
Question 24 options:
a)
7.34x10-2 M
b)
4.37x10-3 M
c)
1x102.36 M
d)
6.95x10-3 M..
Answer:
b)
Explanation:
[tex]pH = - log[H {}^{ + } ] \\ 2.36 = - log[H {}^{ + } ] \\ [H {}^{ + } ] = {10}^{ - 2.36} \\ [H {}^{ + } ] = 4.37 \times {10}^{ - 3} \: M[/tex]
29.) What charge would you expect from a Group 1 atom when it becomes an ion?
a.) 2-
b.) 2+
c.) 1-
d.) 1+
Answer:
d
Explanation:
It is 1+ because when the periodic table is drawn well into there groups become cations
The process that is used by organisms to convert complex organic molecules into carbon dioxide and water molecules, with an overall release of energy is
1 photosynthesis
2 Plants
3 cellular respiration
4 Calorie
How many grams of water are produced when 12.50 mol oxygen reacts with hydrogen?
Answer: According to reaction below, when one mol of oxygen reacts with two mol of hydrogen, two mol of water is produced. Thus, when 2.5 mol of oxygen reacted with hydrogen, 2 * 2.5 mol = 5 mol of water is produced. The molar mass of water is 18 g/mol.
Explanation:
Not My WORK! I got this info from another site. BUT I HOPE IT HELPS :)
Inicialmente una muestra de neón tiene un volumen de 2,50 L a 15 °C. ¿Cuál es la
temperatura en °C, cuando el volumen de la muestra cambia a cada uno de los
siguientes volúmenes, ¿manteniéndose la presión constante?
a. 5,0 L b. 1250 ml c. 7,50L d. 3550 ml
naoooooooo seiiiiiiiii !!!!!!!!!!!!!!
Porque una solución acuosa 30g de sal en 80g de agua Que % de masa de sal contiene
Given :
An aqueous solution of 30g of salt in 80g of water.
To Find :
The % mass of the salt.
Solution :
Mass percentage of the salt is given by :
[tex]Mass \ \% = \dfrac{Mass \ of \ salt}{Mass \ of \ salt + Mass \ of \ water}\\\\Mass \ \% = \dfrac{30}{30 + 80 }\times 100 \%\\\\Mass \ \% = 27.27\ \%[/tex]
Hence, this is the required solution.
What is the molarity of a solution made from dissolving 3.0 moles of KCl in 500 mL of solution?
A. 750 M KCl solution
B. 3.0 M KCl solution
C. 0.06M KCl solution
D. 6M KCl solution
Answer:
najah zggs haihß hajoa ha8 a an àjàhajß
Which of the following sequence is correct for the oxidation of alcohol?
A. Ethanol-Ethanal-Ethanoic acid
B. Ethanol-Ethanoic acid- Ethanal
C. Ethanal-Ethanol-Ethanoic acid
D. Ethanal-Ethanoic acid-Ethanol
ZnSO4 +
+
LINO, → ---- Zn(NO3)2
+
Li,SO4
Balanced equation
Answer:
ZnSO4 + 2LiNO3 → Zn(NO3)2 + Li2SO4
Explanation:
There's many resources on web that can assist you with this concept:
https://en.intl.chemicalaid.com/tools/equationbalancer.php
https://www.webqc.org/balance.php
I’d appreciate the help! :)
Here is the reaction:
3 NO2 (g) + H2O (l) = 2HNO3 (l) + NO (g)
Answer: 300g
Explanation:
first we write the given values on top
224L. x
3 NO2 (g) + H2O (l) = 2HNO3 (l) + NO (g)
22.4L 30g
then we form a formula
224L/22.4L= x/30g
224*30/22.4
6720/22.4= 300g
Balance the following equation:
-_MgCO3 → _MgO + __CO2
Answer:
Decomposition
Explanation:
Magnesite = Magnesium Oxide + Carbon Dioxide
Help me with chemistry! I got this answer wrong , what would be the right one?
Answer: Number 3
Explanation: Electronegativity is a measure of how strongly atoms attract bonding electrons to themselves.
I think, I could be wrong though.
calculate the pressure at which the volume of oxygen becomes tripled. if it initial volume at 3.00 atm at 75cm³. if temperature is constant.
Help me
I'll give brainiest
Answer:
The new pressure is equal to 1 atm.
Explanation:
Given that,
Initial pressure, P₁ = 3 atm
Initial volume, V₁ = 75cm³
Final volume, V₂ = 3V₁ = 225 cm³
We need to find the final pressure. The mathematical relation between P and V is :
[tex]P\propto \dfrac{1}{V}\\\\or\\\\\dfrac{P_1}{P_2}=\dfrac{V_2}{V_1}[/tex]
Where
V₂ is the new volume
So,
[tex]P_2=\dfrac{P_1V_1}{V_2}\\\\P_2=\dfrac{3\times 75}{225}\\\\P_2=1\ atm[/tex]
So, the new pressure is equal to 1 atm.
Can someone please help, 20 points
Draw 3-ethyl-2,4-dimethyl octanoic acid
3-ethyl-2.4-dimethyl-octanoic acid
A sample of O2 with an initial temperature of 50.0 oC and a volume of 105 L is cooled to -25 oC. The new pressure is 105.4 kPa and the new volume is 55.0 L. What was the initial pressure of the sample? Show your work, using the G.U.E.S.S. method.
Answer:
71.92 kPa
Explanation:
Using the combined gas law equation;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (kPa)
P2 = final pressure (kPa)
V1 = initial volume (L)
V2 = final volume (L)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information provided in this question;
T1 = 50°C = 50 + 273 = 323K
V1 = 105L
T2 = -25°C = -25 + 273 = 248K
P2 = 105.4 kPa
P1 = ?
V2 = 55.0 L
Using P1V1/T1 = P2V2/T2
P1 × 105/323 = 105.4 × 55/248
105P1/323 = 5797/248
0.325P1 = 23.375
P1 = 23.375 ÷ 0.325
P1 = 71.92 kPa
Mallory combines two chemicals and notices that each chemical retains its original properties. What did Mallory form?
O a mixture
a compound
an element
an atom
Answer:
A mixture
Explanation:
Polar bonds share electrons _______.
28. Which of the following reactions at equilibrium would NOT be affected by volume
changes at constant temperature?
a. 2 CO(g) + O2(e) < > 2 CO2(g)
b. 2 NO2(g) → N2048)
c. 2 NO(g) + 3 F2(g) → 2 F3NO(e)
d. O3(e) + NO(g) + > NOzle) +
e. None of the above.
Ozig)
Answer:
Explanation:
is the
Compared to the energy released per mole of reactant during chemical reactions, the energy
released per mole of reactant during nuclear reactions is
1.
much less
2.
much greater
3.
slightly less
4.
slightly greater
Answer:
2. much greater
The statement, that describes the energy released per mole of reactant during nuclear reactions is "much greater."
What are nuclear reactions?Nuclear reaction is a sort of reaction in which the structure of an atom's nucleus changes completely, frequently producing a different element while releasing energy.
The energy released by nuclei is far more dense (approximately a million times more dense) than the energy released by atom interactions (chemical reactions). This is what gives nuclear weapons their extraordinarily huge and destructive force when compared to conventional weapons. Nuclear reactions generate more energy than chemical reactions.
Hence the correct option is 2.
Learn more about nuclear reaction here
https://brainly.com/question/12786977
#SPJ2
Can someone answer question 3 ASAP please
Answer:
Molecules must collide with sufficient energy, known as the activation energy, so that chemical bonds can break. Molecules must collide with the proper orientation. A collision that meets these two criteria, and that results in a chemical reaction, is known as a successful collision or an effective collision.
a. Use VSEPR to predict bond angles at the marked atom. The angle is : _______ degrees. The expected hybridization at the marked atom is _____ . b. Use VSEPR to predict bond angles at the marked atom. The angle is : _______ degrees. The expected hybridization at the marked atom is _____ .
Answer: Hello your question is incomplete attached below is the complete question with the missing diagrams
a) The angle = 120°
hybridization = sp2
b) The angle = 120°
hybridization = sp2
Explanation:
a) using VSPER to predict bond angles
Given that there is the presence of 1 double bond to C and 2 single bonds one to C and one to H around the marked atom which equals 3 sets of electrons surrounding the central atom.
hence according to VSPER theory the angle = 120° while the Hybridization = sp2
b) Using VSPER to predict bond angles at marked atom
Given that there is There is 1 double bond to C and 2 single bonds to the different C atoms respectively around the marked atom, which makes 3 sets of electorns surrounding the central atom
hence according to VSPER theory the angle = 120° while the Hybridization = sp2
Which radiation detection device is the best to use for measuring the presence of radiation in large moving objects where constant monitoring is impossible?
film badge
Geiger counter
cloud chamber
scintillation counter
Answer:
A film badge
Explanation:
The film badge dosimeter or film badge is a personal dosimeter used for monitoring cumulative radiation dose due to ionizing radiation. It of a photographic film and a holder. This film badge is used to determine or measure and record the radiation exposure as a result of radiations, x-rays, gamma rays and also beta particles.
All users of medical x-ray equipment (C-arms, fluoro units, therapy units) must wear badges. Those using larger quantities of radioactive materials will also be provided badges. The correct option is A.
What is film badge?Ionising radiation exposure is measured using photographic film for personnel monitoring purposes. A filter that protects part of the film from particular types of radiation may also be present in the film badge, which may contain two or three films with varying sensitivity levels.
A particular kind of passive dosimeter is the film badge. It comprises of a photographic emulsion film in a light-tight wrapping (kept in a holder) that changes optical density in response to ionising radiation. The holder, which also includes several filters (for calculating tissue equivalent amounts), is typically worn on the body's trunk.
So film badge is the device used most commonly today for monitoring the radiation exposure of personnel.
Thus the correct option is A.
To know more about film badge, visit;
https://brainly.com/question/14019863
#SPJ7
A gas occupies a volume of 2.50 L at a pressure of 350.0 kPa. If the temperature remains
constant, what volume would the gas occupy at 1750 kPa ?
1. 12.5 L
2. 5.00 L
3. 1.40e+2L
4. 0.500 L
Answer:
V₂ = 0.5 L
Explanation:
Given that,
Initial volume, V₁ = 2.5 L
Pressure, P₁ = 350 kPa
New pressure, P₂ = 1750 kPa
We need to find the new volume if the temperature remains constant. The mathematical relation between P and V is :
[tex]P\propto \dfrac{1}{V}\\\\or\\\\\dfrac{P_1}{P_2}=\dfrac{V_2}{V_1}[/tex]
Where
V₂ is new volume
So,
[tex]V_2=\dfrac{P_1V_1}{P_2}\\\\V_2=\dfrac{350\times 2.5}{1750}\\\\V_2=0.5\ L[/tex]
So, the new volume is equal to 0.5 L.
What is the molarity of a solution that is composed of 10 grams of Sodium Chloride ( NaCl) dissolved in 3.50 L of water
Answer: The molarity of solution will be 0.049 M
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}}{\text{Molar mass of solute}\times \text{Volume of solution (L)}}[/tex]
We are given:
Given mass of sodium chloride = 10 g
Molar mass of sodium chloride = 58.44 g/mol
Volume of solution = 3.50 L
Putting values in above equation:
[tex]\text{Molarity of NaCl}=\frac{10 g}{58.44g/mol\times 3.50}\\\\\text{Molarity of NaCl}=0.049M[/tex]
Hence, the molarity of solution will be 0.049 M
Polar bears are adapted to stay warm by growing thick fur. These organisms most likely live in a what
Answer:
They live in the open snow
Explanation:
10 ejemplos de disoluciones identificando el soluto y el solvente y el tipo de disolucion que corresponde
Answer:
hije51k 5jk45679349fjvokhffgpv9ü
HELP ASAP!!! #2 only please.
Answer:
friend me on here and imma send you the link Explanation: