The complete sequence is:
20, 0.6, 41.6667, 69.4444, 12, 500.
To find the missing numbers in the given sequence, let's analyze the pattern and fill in the gaps.
Looking at the sequence, we can observe that there is an exponential pattern occurring.
Let's break it down step by step:
Starting with the first number, 20, we can see that each subsequent number is decreasing or increasing exponentially.
If we divide the second number by the first number, we get 12/20 = 0.6. Similarly, dividing the third number by the second number gives us 500/12 = 41.6667.
We can see that there is a decreasing exponential pattern from the first to the third number.
Let's continue this pattern:
If we divide the fourth number by the third number, we get an approximate value of 41.6667/0.6 = 69.4444.
So, we can deduce that the missing numbers in the sequence are approximately 0.6, 41.6667, and 69.4444.
For similar question on sequence.
https://brainly.com/question/7882626
#SPJ8
if the median of a data set is 8 and the mean is 10, which of the following is most likely?
You didn't provide a list of assumptions, but I would say that high points in the data set brought the mean up, and the rest of the points are around the median. In this scenario, I think there is at least one outlier bringing the mean up significantly. However, if the outlier is excluded from the data, the average would be slightly lower but still a better representation of the data.
Based on the given information, it is likely that the data set is positively skewed.
In a positively skewed distribution, the mean is typically larger than the median. Since the mean is 10 and the median is 8 in this case, it suggests that there are some relatively larger values in the data set that are pulling the mean upward. This indicates a skewness towards the higher end of the data.
In a positively skewed distribution, the most likely scenario is that there are a few exceptionally large values in the data set, which contribute to the higher mean but do not significantly affect the median. These outliers or extreme values can cause the mean to be larger than the median, indicating a rightward tail in the distribution.
To know more about median click here: brainly.com/question/11237736 #SPJ11
A small block with a mass of 0.0400 kg is moving in the xy-plane. The net force on the block is described by the potential energy function (x) = (5.80 m2 ⁄ )x 2 − (3.60 m3 ⁄ )y 3 . What are the magnitude and direction of the acceleration of the block when it is at the point (x = 0.300m, y = 0.600m)?
The small block with a mass of 0.0400 kg is moving in the xy-plane, and its net force is described by the potential energy function (x) = (5.80 m^2/ )x^2 - (3.60 m^3/ )y^3. The magnitude of the acceleration is approximately 130.8 m/s^2, and its direction is approximately 48.1 degrees below the negative x-axis.
To find the acceleration, we start by calculating the force acting on the block using the negative gradient of the potential energy function. Taking the partial derivatives of the potential energy function with respect to x and y, we obtain the force components ∂U/∂x and ∂U/∂y.
By substituting the given coordinates (x = 0.300m, y = 0.600m) into the partial derivatives, we find the force components Fx and Fy. Using Newton's second law (F = ma), we divide the force components by the mass of the block to obtain the acceleration components ax and ay.
To calculate the magnitude of the acceleration, we use the Pythagorean theorem to find the square root of the sum of the squares of the acceleration components. This yields the magnitude |a| ≈ 130.8 m/s^2.
To determine the direction of the acceleration, we use the inverse tangent function (tan^(-1)) with the ratio of the acceleration components ay/ax. This gives us the angle θ, which is approximately -48.1 degrees.
In summary, the magnitude of the acceleration is approximately 130.8 m/s^2, and its direction is approximately 48.1 degrees below the negative x-axis.
To know more about magnitude of the acceleration, click here: brainly.com/question/20115074
#SPJ11
As the length of a confidence interval increases, the degree of confidence in it actually containing the population parameter being estimated (confidence level) also increases. Is this statement true or false? Explain.
The statement "As the length of a confidence interval increases, the degree of confidence in it actually containing the population parameter being estimated (confidence level) also increases" is false. The confidence level remains the same regardless of the length of the confidence interval.
The confidence level of a confidence interval is determined before any data is collected and is a measure of the long-term success rate of the procedure used to construct the interval. It represents the probability that the interval will capture the true population parameter in repeated sampling.
The length of a confidence interval, on the other hand, depends on factors such as the variability of the data and the desired level of precision. The length of the interval determines the range of plausible values for the population parameter.
While it is true that a longer confidence interval may capture a wider range of potential values, it does not increase the degree of confidence in containing the true population parameter. The confidence level is fixed at the time of construction and does not change based on the length of the interval. The confidence level provides a measure of the reliability of the estimation procedure, while the length of the interval affects the precision and range of plausible values.
To learn more about confidence interval click here: brainly.com/question/32278466
#SPJ11
The diameter of bearings produced in a production line is monitored using a control chart with 3-standard deviation control limits. The mean and standard deviation are estimated to be 1.6 cm and 0.3 mm, respectively. The sample size is 9. Suppose the mean diameter of the bearings being produced in the production line has been shifted to 1.65 cm after operating for a month. Determine the ARL (average run length) after the shift.
The ARL (average run length) after the shift is approximately 222.22.
The ARL (average run length) after the shift can be determined from the control chart that monitors the diameter of bearings produced in a production line using 3-standard deviation control limits.
A standard deviation is a statistic that shows how widely values are spread from the average value (mean). A lower standard deviation implies that most values are very close to the average, whereas a higher standard deviation indicates that the values are more spread out. It is used to measure the amount of variation or dispersion of a set of values. The square root of the variance is the standard deviation.
ARL (average run length) is the average number of samples that may be examined before a control chart signals that an out-of-control situation has arisen. It's a measure of a control chart's efficiency in identifying out-of-control circumstances.
Let's solve the given problem: Mean (μ) = 1.6 cm, Standard deviation (σ) = 0.3 mm, Sample size (n) = 9
The sample mean is shifted to 1.65 cm after operating for a month.
The shift is = 1.65 - 1.6 = 0.05 cm = 0.5 mm.The new mean (μ') = 1.65 cm = 16.5 mm.The new standard deviation (σ') remains the same, which is 0.3 mm.The new control limits with a 3-standard deviation shift in the mean will be:UCL = μ' + 3σ' = 16.5 + 3(0.3) = 17.4 mmLCL = μ' - 3σ' = 16.5 - 3(0.3) = 15.6 mmThe width of the control limits is: WL = UCL - LCL = 17.4 - 15.6 = 1.8 mmThe ARL (average run length) after the shift can be calculated as follows:
ARL = (1 / α) * (WL / 6σ'), where α = 0.0027 (the area under the normal curve beyond 3 standard deviations on each side)
Substituting the given values, we have: ARL = (1 / 0.0027) * (1.8 / (6 * 0.3)) = 222.22.
Therefore, the ARL (average run length) after the shift is approximately 222.22.
To know more about standard deviation, visit the link : https://brainly.com/question/475676
#SPJ11
Listed below are speeds (min) measured from traffic on a busy highway. This simple random sample was obtained at 3:30 PM on a weekday. Use the sample data to construct an 80% confidence interval estimate of the population standard deviation 65 63 63 57 63 55 60 59 60 69 62 66 Click the icon to view the table of Chi-Square critical values The confidence interval estimate is milh
The confidence interval estimate of the population standard deviation is (8.34, 4.49).
The speeds measured from traffic on a busy highway, the sample data is:65, 63, 63, 57, 63, 55, 60, 59, 60, 69, 62, 66. We want to construct an 80% confidence interval estimate of the population standard deviation. The formula to compute the confidence interval is as follows:\[\text{Confidence Interval}=\left( \sqrt{\frac{(n-1)s^2}{\chi_{\frac{\alpha}{2},n-1}^2}}, \sqrt{\frac{(n-1)s^2}{\chi_{1-\frac{\alpha}{2},n-1}^2}}\right)\]Where,\[\text{s}= \text{sample standard deviation}\]n = sample size.\[\alpha= 1 - \text{confidence level}\]\[\chi^2= \text{critical value}\]From the given data, sample standard deviation can be computed as follows:$\text{sample standard deviation, s}= 4.60$.To find the critical values of Chi-Square distribution, $\alpha = 1-0.8 = 0.2$ and \[n-1 = 11\]Therefore, from the table of Chi-Square critical values, $\chi_{\frac{\alpha}{2},n-1}^2$ and $\chi_{1-\frac{\alpha}{2},n-1}^2$ can be computed as follows:$\chi_{\frac{\alpha}{2},n-1}^2=7.015$and $\chi_{1-\frac{\alpha}{2},n-1}^2=19.68$Putting all the computed values in the formula of the confidence interval, we have:Confidence Interval = $\left( \sqrt{\frac{(12-1)4.60^2}{7.015}}, \sqrt{\frac{(12-1)4.60^2}{19.68}}\right)$= (8.34, 4.49)Hence, the confidence interval estimate of the population standard deviation is (8.34, 4.49).
Learn more about standard deviation here:
https://brainly.com/question/29115611
#SPJ11
Given a data set with n = 27 observations, containing
one independent variable, find the critical value for an
F-test at α = 2.5% significance.
Show your answer with four decimal places.
The critical value for an F-test at α = 2.5% significance with one independent variable and 27 observations is approximately 5.7033. It represents the threshold beyond which we reject the null hypothesis in favor of the alternative hypothesis.
To determine the critical value for an F-test at α = 2.5% significance, we need to know the degrees of freedom associated with the numerator and denominator of the F-statistic.
For an F-test, the numerator degrees of freedom (df1) correspond to the number of groups or treatment conditions minus 1. In this case, since there is only one independent variable, the number of groups is 2 (assuming a standard F-test), so df1 = 2 - 1 = 1.
The denominator degrees of freedom (df2) correspond to the total number of observations minus the number of groups. In this case, we have n = 27 observations and 2 groups, so df2 = 27 - 2 = 25.
Now we can use these degrees of freedom values and the significance level (α) to find the critical value using an F-table or calculator.
Using statistical software or an online calculator, the critical value for an F-test with df1 = 1 and df2 = 25 at α = 2.5% significance is approximately 5.7033 (rounded to four decimal places).
Therefore, the critical value for the F-test at α = 2.5% significance is 5.7033.
To know more about critical value refer here:
https://brainly.com/question/32607910#
#SPJ11
graph f(x)=2x−1 and g(x)=−x 5 on the same coordinate is the solution to the equation f(x)=g(x)?enter your answer in the box.
The graph of f(x) = 2x - 1 is a line with a slope of 2 and a y-intercept of -1. The graph of g(x) = -x^(-5) is an exponential function that decreases rapidly as x approaches negative infinity. The two graphs intersect at the point (-1, -1). Therefore, the solution to the equation f(x) = g(x) is x = -1.
To graph f(x) = 2x - 1, we can start by plotting the point (0, -1). Then, we can move 2 units to the right and 1 unit up to get the point (1, 0). We can continue to do this to plot more points on the graph. The graph of f(x) = 2x - 1 will be a line with a slope of 2 and a y-intercept of -1.
To graph g(x) = -x^(-5), we can start by plotting the point (1, -1). Then, we can move 1 unit to the left and 1/5 unit down to get the point (0.9, -1.2). We can continue to do this to plot more points on the graph.
The graph of g(x) = -x^(-5) will be an exponential function that decreases rapidly as x approaches negative infinity.
The two graphs intersect at the point (-1, -1). Therefore, the solution to the equation f(x) = g(x) is x = -1.
Learn more about exponential function here
brainly.com/question/29287497
#SPJ11
The data set below represents a sample of scores on a 10-point quiz. 7, 4, 9, 6, 10, 9, 5, 4 1 Find the sum of the mean and the median. 14.25 12.75 12.25 15.50 13.25 In a certain state, 36% of adults drive every day. Suppose a random sample of 625 adults from the state is chosen. Let X denote the number in the sample who drive every day. Find the value of X that is two standard deviations above the mean. 237 513 249 201 225 Lifetimes of batteries of a certain type are normally distributed with mean 42.6 hours and standard deviation 2.8 hours. Find the lifetime in hours that would separate the 7.5% of batteries with the shortest lifetimes from the rest. 38.57 40.50 45.80 42.39 35.80 Find the number of US adults that must be included in a poll in order to estimate, with margin of error 1.5%, the percentage that are concerned about high gas prices. Use a 94% confidence level, and assume about 79% are concerned about gas prices. 2607 2259 1387 603 3928
The number of US adults that must be included in the poll is 3128.
To find the number of US adults that must be included in a poll in order to estimate the percentage concerned about high gas prices with a margin of error of 1.5% and a 94% confidence level, we can use the formula for sample size calculation.
The formula for calculating the sample size needed for estimating a proportion is:
n = (Z^2 * p * (1-p)) / E^2
where:
n = sample size
Z = Z-score corresponding to the desired confidence level
p = estimated proportion
E = margin of error
Given that the confidence level is 94%, the Z-score can be found using a standard normal distribution table. For a 94% confidence level, the Z-score is approximately 1.88.
The estimated proportion of adults concerned about gas prices is 79%, which can be expressed as 0.79.
The margin of error is 1.5%, which can be expressed as 0.015.
Substituting these values into the formula:
n = (1.88^2 * 0.79 * (1-0.79)) / 0.015^2
Simplifying the equation:
n = (3.5344 * 0.79 * 0.21) / 0.000225
n ≈ 3127.4976
Rounding up to the nearest whole number, the number of US adults that must be included in the poll is 3128.
For more such question on poll. visit :
https://brainly.com/question/12496604
#SPJ8
The solution to 12x = 36 is x = . (Only input whole number) (5 points) Blank 1:
Answer:
x = 3
Step-by-step explanation:
12x = 36
x = 36/12
x = 3
Hello !
Answer:
[tex]\large \boxed{\sf x=3}[/tex]
Step-by-step explanation:
We want to find the value of x that verifies the following equation :
[tex]\sf 12x=36[/tex]
Let's isolate x.
Divide both sides by 12 :
[tex]\sf \dfrac{12x}{12} =\dfrac{36}{12} \\\\\boxed{\sf x=3}[/tex]
Have a nice day ;)
Find the mean, median, and mode(s) for the given sample data. Round to two decimal places as needed. 6) The amount of time in hours) that Sam studied for an exam on each of the last five days is 6) given below. 2.7 8.3 6.8 2.1 5.1
The mean value of the sample data is 5.8 hours.
The median value of the sample data is 5.95 hours.
Mode of the given sample data are:\[\begin{array}{l}\text{Mean} = 5.8\,\,\text{hours}\\\\\text{Median} = 5.95\,\,\text{hours}\\\\\text{Mode} = \text{none}\end{array}\]
Given sample data (hours): 2.7, 8.3, 6.8, 2.1, 5.1.
To find mean, median, and mode(s), we need to arrange the sample data in ascending order, as follows:2.1, 2.7, 5.1, 6.8, 8.3
(a) Mean: The mean is the sum of all data values divided by the number of data values. So, we have:\[\text{Mean} = \frac{{2.1 + 2.7 + 5.1 + 6.8 + 8.3}}{5} = 5.8\]Therefore, the mean value of the sample data is 5.8 hours.
(b) Median: The median is the middle value of the sample data, after it has been sorted. So, we have:Median = (5.1 + 6.8) / 2 = 5.95Therefore, the median value of the sample data is 5.95 hours.
(c)Mode: The mode is the most frequently occurring value in the sample data. Here, we don't have any repeating value.
Therefore, there is no mode for this sample data.
Finally, the mean, median, and mode of the given sample data are:\[\begin{array}{l}\text{Mean} = 5.8\,\,\text{hours}\\\\\text{Median} = 5.95\,\,\text{hours}\\\\\text{Mode} = \text{none}\end{array}\]
To know more about mean visit:
https://brainly.com/question/1136789
#SPJ11
The given sample data is {2.7, 8.3, 6.8, 2.1, 5.1}.
Now, we have to find the mean, median, and mode(s) for the given data.
Mean:The formula to find the mean of n given data is;
$$\bar{x} = \frac{1}{n}\sum_{i=1}^{n}x_i$$
Here, n = 5, and the given data is {2.7, 8.3, 6.8, 2.1, 5.1}.
So, putting these values in the formula, we get;
$$\bar{x} = \frac{1}{5}\left(2.7+8.3+6.8+2.1+5.1\right)$$$$\bar{x} = \frac{1}{5}\left(25\right)$$$$\bar{x} = 5$$
Therefore, the mean of the given sample data is 5.
Median:Arrange the given data in ascending order.{2.1, 2.7, 5.1, 6.8, 8.3}
The median is the middle value of the given data. Here, the number of data is odd, and the middle value is
Therefore, the median of the given sample data is
Mode:The mode is the value that occurs the most number of times in the given data.
Here, all the values in the given data occur only once.
Therefore, there is no mode for the given data.
To know more about mean, visit:
https://brainly.com/question/31101410
#SPJ11
Find the solution of the initial-value problem y" - 55" +9y' - 45y = sec 3t, y(0) = 2, 7(0) = 0, "(0) = 33. A fundamental set of solutions of the homogeneous equation is given by the functions: y(t) = eat, where a = = yz(t) yz(t) = = A particular solution is given by: et Y(t) = - Ids. yı(t) to ])ºyalt) + • 43(t) Therefore the solution of the initial-value problem is: y(t) +Y(t)=__.
To solve the initial-value problem, we find the complementary solution by solving the associated homogeneous equation, which yields yc(t) = C1e^(56.909t) + C2e^(-0.909t). The particular solution is found using the method of undetermined coefficients. The general solution is given by y(t) = yc(t) + yp(t), and the specific solution satisfying the initial conditions can be obtained by substituting the values and solving for the constants.
To solve the given initial-value problem, we will find the particular solution and the complementary solution.
1. Finding the complementary solution:
The homogeneous equation associated with the given initial-value problem is y" - 55y' + 9y' - 45y = 0. To find the complementary solution, we solve this homogeneous equation. The characteristic equation is obtained by substituting y(t) = e^(at) into the homogeneous equation:
(a^2 - 55a + 9) e^(at) - 45e^(at) = 0
Simplifying, we get:
a^2 - 55a + 9 - 45 = 0
a^2 - 55a - 36 = 0
Using the quadratic formula, we find two solutions for 'a': a1 ≈ 56.909 and a2 ≈ -0.909. Therefore, the complementary solution is given by:
yc(t) = C1e^(56.909t) + C2e^(-0.909t), where C1 and C2 are arbitrary constants.
2. Finding the particular solution:
To find the particular solution, we need to solve the non-homogeneous part of the equation, which is sec(3t). A particular solution can be found using the method of undetermined coefficients. We assume a particular solution of the form:
yp(t) = A sec(3t)
Differentiating twice and substituting into the non-homogeneous equation, we can solve for the constant A.
3. Solution of the initial-value problem:
Now we have the complementary solution yc(t) and the particular solution yp(t). The general solution of the initial-value problem is given by:
y(t) = yc(t) + yp(t) = C1e^(56.909t) + C2e^(-0.909t) + A sec(3t)
To find the specific solution that satisfies the initial conditions, substitute y(0) = 2, y'(0) = 0, and y''(0) = 33 into the above equation and solve for the constants C1, C2, and A.
Note: Please note that the provided solution is only a general outline of the process. Calculating the specific values of the constants and solving the initial-value problem would involve further calculations.
Learn more about initial-value problem:
https://brainly.com/question/30782698
#SPJ11
It is assumed that the average Triglycerides levet in a healthy person is 130 unit. In a sample of 30 patients, the sample mean of Triglycerides level is 122 and the sample standard deviation is 20. Calculate the test statistic value
The test statistic value for this situation is approximately -2.474.
A hypothesis test comparing the sample mean to the assumed population mean is necessary in order to determine the value of the test statistic. The population mean triglycerides level would be the null hypothesis (H0), and the alternative hypothesis (Ha) would be that the population mean is not 130 units.
The t-statistic, which is calculated as follows, is the test statistic utilized in this circumstance:
t = (test mean - expected populace mean)/(test standard deviation/sqrt(sample size))
Given the data gave, we have:
Expected populace mean (μ): 130 Mean of the sample (x): 122
Test standard deviation (s): 20 (n) sample sizes: 30
Connecting the qualities into the recipe, we can work out the test measurement:
t = (122 - 130) / (20 / sqrt(30)) t = -8 / (20 / sqrt(30)) After calculating this expression, we come to the following conclusion:
t ≈ - 2.474
Hence, the test measurement an incentive for this present circumstance is roughly - 2.474.
To know more about standard deviation refer to
https://brainly.com/question/29115611
#SPJ11
S 9 9 Let N4 be a poisson process with parameter 1, calculate Cov(N5, N+) given s, t, 1 = 3,4,5 Hint: The variance of a poisson distribution with parameter 1 is .
The covariance between N5 and N+ is 0.
How to determine the variance of the poisson distributionThe Poisson process Nt with parameter λ has a variance equal to its mean, which is λ. Therefore, for a Poisson process with parameter 1, the variance is also 1.
To calculate the covariance Cov(N5, N+), we can use the formula:
Cov(N5, N+) = Cov(N5, N4 + N1) = Cov(N5, N4) + Cov(N5, N1)
Since N5 and N4 are independent (since they refer to non-overlapping time intervals), their covariance is 0:
Cov(N5, N4) = 0
The covariance between N5 and N1 can be calculated using the formula for the covariance of two Poisson random variables:
Cov(N5, N1) = E(N5 * N1) - E(N5) * E(N1)
Since N5 and N1 are independent and have the same parameter λ = 1, their expected values are:
E(N5) = λ * t = 1 * 5 = 5
E(N1) = λ * t = 1 * 1 = 1
The expected value E(N5 * N1) can be calculated as the product of their individual expected values:
E(N5 * N1) = E(N5) * E(N1) = 5 * 1 = 5
Therefore, the covariance Cov(N5, N1) is:
Cov(N5, N1) = E(N5 * N1) - E(N5) * E(N1) = 5 - 5 * 1 = 0
Putting it all together, we have:
Cov(N5, N+) = Cov(N5, N4) + Cov(N5, N1) = 0 + 0 = 0
So, the covariance between N5 and N+ is 0.
Learn more about covariance at https://brainly.com/question/28135424
#SPJ1
Show, using the Mean Value Theorem, that | sin r – sin y = x - yl for all real numbers r and y. Prove, using a), that sin r is uniformly continuous on R.
By applying the Mean Value Theorem to the function f(x) = sin(x), it can be shown that for any real numbers r and y, the absolute difference between the values of sin(r) and sin(y) is equal to the difference between r and y multiplied by a constant.
According to the Mean Value Theorem, if a function f(x) is continuous on a closed interval [a, b] and differentiable on the open interval (a, b), then there exists a number c in (a, b) such that f'(c) = (f(b) - f(a))/(b - a). Applying this theorem to the function f(x) = sin(x) on the interval [y, r], we have f'(c) = (sin(r) - sin(y))/(r - y). Since the derivative of sin(x) is cos(x), we can rewrite this as cos(c) = (sin(r) - sin(y))/(r - y).
Now, consider the function g(x) = cos(x). The derivative of g(x) is -sin(x), which has an absolute value bounded by 1 for all real numbers. Therefore, |cos(c)| ≤ 1, which implies |(sin(r) - sin(y))/(r - y)| ≤ 1. Rearranging the equation, we get |sin(r) - sin(y)| ≤ |r - y|.
This result shows that for any real numbers r and y, the absolute difference between sin(r) and sin(y) is bounded by the absolute difference between r and y. This property of sin(x) demonstrates that it is uniformly continuous on the real numbers.
Learn more about interval here:
https://brainly.com/question/11051767
#SPJ11
Random samples of size n = 250 are taken from a population with p = 0.04.
a. Calculate the centerline, the upper control limit (UCL), and the lower control limit (LCL) for the p¯p¯ chart. (Round the value for the centerline to 2 decimal places and the values for the UCL and LCL to 3 decimal places.)
b. Calculate the centerline, the upper control limit (UCL), and the lower control limit (LCL) for the p¯p¯ chart if samples of 150 are used. (Round the value for the centerline to 2 decimal places and the values for the UCL and LCL to 3 decimal places.)
For a p-chart with sample size 150, the centerline (CL) remains 0.04, the upper control limit (UCL) is approximately 0.070, and the lower control limit (LCL) is approximately 0.010.
a. For a p-chart with sample size n = 250 and population proportion p = 0.04, the centerline (CL) is simply the average of the sample proportions, which is equal to the population proportion:
CL = p = 0.04
To calculate the control limits, we need to consider the standard deviation of the sample proportion (σp) and the desired control limits multiplier (z).
The standard deviation of the sample proportion can be calculated using the formula:
σp = sqrt(p(1-p)/n) = sqrt(0.04 * (1-0.04)/250) ≈ 0.008
For a p-chart, the control limits are typically set at three standard deviations away from the centerline. Using the control limits multiplier z = 3, we can calculate the upper control limit (UCL) and lower control limit (LCL) as follows:
UCL = CL + 3σp = 0.04 + 3 * 0.008 ≈ 0.064
LCL = CL - 3σp = 0.04 - 3 * 0.008 ≈ 0.016
Therefore, the centerline (CL) is 0.04, the upper control limit (UCL) is approximately 0.064, and the lower control limit (LCL) is approximately 0.016 for the p-chart with sample size 250.
b. If samples of size n = 150 are used, the centerline (CL) remains the same, as it is still equal to the population proportion p = 0.04:
CL = p = 0.04
However, the standard deviation of the sample proportion (σp) changes since the sample size is different. Using the formula for σp:
σp = sqrt(p(1-p)/n) = sqrt(0.04 * (1-0.04)/150) ≈ 0.01033
Again, the control limits can be calculated by multiplying the standard deviation by the control limits multiplier z = 3:
UCL = CL + 3σp = 0.04 + 3 * 0.01033 ≈ 0.070
LCL = CL - 3σp = 0.04 - 3 * 0.01033 ≈ 0.010
to learn more about standard deviation click here:
brainly.com/question/31946791
#SPJ11
Find the exact area of the surface obtained by rotating the given curve about the x-axis. Using calculus with Parameter curves.
x = 6t − 2t³, y = 6t², 0 ≤ t ≤ 1
The exact area of the surface obtained by rotating the curve defined by the parameter equations x = 6t - 2t³ and y = 6t² about the x-axis can be determined using calculus. The surface area is approximately 213.65 square units.
To find the surface area, we need to integrate the formula for the surface area of a curve rotated about the x-axis, which is given by A = 2π∫[a,b] y√(1 + (dy/dx)²) dx, where [a,b] represents the range of t values.
First, we calculate dy/dx by taking the derivative of y with respect to x: dy/dx = (dy/dt) / (dx/dt). In this case, dy/dx = 12t / (6 - 6t²).
Next, we substitute the values of x, y, and dy/dx into the surface area formula and integrate with respect to x over the range [a,b]. In this case, the range of t is 0 to 1.
After performing the integration, we obtain the value of the surface area to be approximately 213.65 square units.
learn more about surface area here
https://brainly.com/question/30816589
#SPJ11
For a confidence level of 90% with a sample size of 19, find the critical t value. Check Answer
The critical t-value for a 90% confidence level with a sample size of 19 and 18 degrees of freedom is approximately 1.734. This value is obtained from a t-table or statistical software and is used in hypothesis testing or constructing confidence intervals.
To determine the critical t-value for a 90% confidence level with a sample size of 19, we need to determine the degrees of freedom, which is equal to the sample size minus 1 (n - 1).
Degrees of Freedom (df) = 19 - 1 = 18
Next, we can use a t-table or a statistical software to find the critical t-value for a 90% confidence level with 18 degrees of freedom.
Checking the t-table, the critical t-value for a 90% confidence level with 18 degrees of freedom is approximately 1.734.
Therefore, the critical t-value for a 90% confidence level with a sample size of 19 and 18 degrees of freedom is approximately 1.734.
To know more about critical t-value refer here:
https://brainly.com/question/32389590#
#SPJ11
In a program designed to help patients stop smoking, 219 patients were given sustained care, and 82.2% of them were no longer smoking after one month. Use a 0.10 significance level to test the claim that 80%
Based on this sample, we cannot say that the proportion of patients who quit smoking after one month is different from 80% with a 0.10 significance level.
How to solve for the proportionFirst, let's calculate the sample proportion (p'):
p = x/n = (0.822 * 219) / 219 = 0.822
Next, let's calculate the standard error (SE) of the sample proportion:
SE = √( p(1 - p) / n ) = sqrt( 0.80 * 0.20 / 219)
Using a calculator or Python, the standard error is calculated as follows:
SE ≈ sqrt(0.16 / 219) ≈ 0.034
Now we can calculate the z-score, which is (p' - p) / SE.
z = (0.822 - 0.80) / 0.034 ≈ 0.65
Finally, we compare this z-score to the critical z-score for our significance level (0.10). Since we are doing a two-tailed test, the critical z-scores are approximately ±1.645.
Because our calculated z-score of 0.65 is less than 1.645 and greater than -1.645, we do not have enough evidence to reject the null hypothesis. This means that based on this sample, we cannot say that the proportion of patients who quit smoking after one month is different from 80% with a 0.10 significance level.
Read more on proportion here https://brainly.com/question/1496357
#SPJ4
The speed of the fluid in the constriction of the pipe can be determined using the principle of continuity, which states that the mass flow rate of an incompressible fluid remains constant. The speed of the fluid in the constriction can be calculated by applying the equation of continuity, considering the change in diameter.
According to the principle of continuity, the mass flow rate of an incompressible fluid remains constant along a pipe. This means that the product of the fluid's velocity and the cross-sectional area of the pipe remains constant.
Let's denote the initial diameter of the pipe as D1 = 6 cm and the final diameter (in the constriction) as D2 = 3 cm. The initial velocity of the fluid is v1 = 1 m/s.
The cross-sectional area of the pipe at the initial section is A1 = π(D1/2)^2, and at the constriction section, it is A2 = π(D2/2)^2.
According to the principle of continuity, A1 * v1 = A2 * v2, where v2 is the velocity of the fluid in the constriction.
We can substitute the values into the equation: π(D1/2)^2 * v1 = π(D2/2)^2 * v2.
Simplifying the equation: (D1/2)^2 * v1 = (D2/2)^2 * v2.
Plugging in the given values: (6/2)^2 * 1 = (3/2)^2 * v2.
9 * 1 = 2.25 * v2.
v2 = 9/2.25 = 4 m/s.
Therefore, the speed of the fluid in the constriction is 4 m/s.
To learn more about speed here:
brainly.com/question/17661499
#SPJ11
The table shows the total aquare footage in birore) of metailing pace e showing arter and wir so fortellera dolu for 10 years. The content of the presion to sy123.44.Com 40 52 51 54 55 67 5.85661 66200436 08531001110211200 1204713000 1626 (a) Find the coefficient of determination and interprethol (Hound to the decimal places needed) 7:14 .
The given data represents the total square footage in birore of metal storage space showing arter and wir so forth for 10 years. The content of the presion to sy123.44.Com 40 52 51 54 55 67 5.85661 66200436 08531001110211200 1204713000 1626To find: Coefficient of determination and its interpretation.
Coefficient of determination Coefficient of determination is the fraction or proportion of the total variation in the dependent variable that is explained or predicted by the independent variable(s). It measures how well the regression equation represents the data set. The coefficient of determination is calculated by squaring the correlation coefficient. It is represented as r².
The formula to calculate the coefficient of determination is:r² = (SSR/SST) = 1 - (SSE/SST)where, SSR is the sum of squares regression, SSE is the sum of squares error, and SST is the total sum of squares. Substitute the given values in the above formula:r² = (SSR/SST) = 1 - (SSE/SST)SSR = ∑(ŷ - ȳ)² = 10242.62SSE = ∑(y - ŷ)² = 1783.96SST = SSR + SSE = 10242.62 + 1783.96 = 12026.58r² = (SSR/SST) = 1 - (SSE/SST)= (10242.62 / 12026.58)= 0.8525
Therefore, the coefficient of determination is 0.8525.Interpretation of the coefficient of determination: The coefficient of determination value ranges from 0 to 1. The higher the coefficient of determination, the better the regression equation fits the data set. In this case, the value of the coefficient of determination is 0.8525 which means that approximately 85.25% of the total variation in the dependent variable is explained by the independent variable(s).
Therefore, we can say that the regression equation fits the data set well and there is a strong positive relationship between the independent and dependent variables.
Know more about Coefficient:
https://brainly.com/question/1594145
#SPJ11
A cannon shell follows a parabolic path. It reaches a maximum height of 40ft and land at a distance of 20 ft from the cannon. A. Write the equation of the parabolic path the shell follows. (Note: your answer will depend on where you locate your coordinate axes. B. Find the height of the shell when it's horizontal distance from the cannon is 10 ft.
The ball's height at a horizontal distance of 10 feet from the cannon is H = 56 - 16 = 40 feet.
A cannonball goes in an illustrative way when terminated from a cannon. The level of the ball at some irregular point can be resolved using the going with condition: The equation for H is -16t2 + Vt + H0, where H stands for height, t for time, V for initial velocity, and H0 for initial height. A. Before we can determine the condition of the cannonball's illustration, we must first determine the directions of the highest point it reaches.
Our coordinate axis' starting point will be (0, 0). Since the ball can reach a height of 40 feet, its vertex is at (10,40). The equation can be obtained by replacing these values with those of a parabola: y = a(x - h)2 + k. y = - 16x2 + 800x - 800.B. We want to find the level of the shell when its even partition from the gun is 10 ft. At this point, the height will be determined using the same equation: H = -16t2 + Vt + H0. Because the ball traveled 20 feet horizontally, we know that it took one second for it to land.
Consequently, we can substitute t = 1 and H0 = 0 into the circumstance: H = -16(1)2 + V(1) + 0. The way that the ball voyaged 40 feet in an upward direction in the principal second of its flight (when it was going up) and 20 feet in an upward direction as of now of its flight (when it was descending) can be utilized to compute its speed. H = V - 16. We can substitute t = 1 and H = 40 using the same condition to see as V: 40 = -16(1)2 + V(1) + 0. V = 56. H = 56 - 16 = 40 feet is the ball's height at a horizontal distance of 10 feet from the cannon.
To know more about equation refer to
https://brainly.com/question/29657983
#SPJ11
in circle o, ac and bd are diameters. what is m? 50° 80° 100° 130°
In a circle, when two diameters intersect, the angles formed at the intersection point are always right angles (90°).
Therefore, none of the given angle measures (50°, 80°, 100°, 130°) can represent the angle formed by diameters AC and BD.
The correct answer would be 90° since the intersection of diameters always creates right angles in a circle.
Learn more about diameters here:
https://brainly.com/question/31445584
#SPJ11
Answer: A. 50°
Asked the AI
FILL IN THE BLANK use the data in the table to complete the sentence. x y –2 7 –1 6 0 5 1 4 the function has an average rate of change of __________.
The function has an average rate of change of -1.
To find the average rate of change of a function, we can use the formula:
Average Rate of Change = (Change in y) / (Change in x)
Using the data provided in the table, we can calculate the average rate of change between each pair of consecutive points. Let's calculate it for each pair:
Between (-2, 7) and (-1, 6):
Change in y = 6 - 7 = -1
Change in x = -1 - (-2) = 1
Average Rate of Change = (-1) / (1) = -1
Between (-1, 6) and (0, 5):
Change in y = 5 - 6 = -1
Change in x = 0 - (-1) = 1
Average Rate of Change = (-1) / (1) = -1
Between (0, 5) and (1, 4):
Change in y = 4 - 5 = -1
Change in x = 1 - 0 = 1
Average Rate of Change = (-1) / (1) = -1
From the calculations, we can see that the function has a constant average rate of change of -1 between any two consecutive points in the table.
Learn more about average rate here:
https://brainly.com/question/28739131
#SPJ11
Grading on the curve implies what type of evaluation comparison?
Which of the following is a semiobjective item?
true false
matching
essay
short-answer
Grading on the curve implies a relative evaluation comparison, where the performance of students is ranked and graded based on their position relative to the rest of the class. Among the given options, the semiobjective item is "matching."
How to explain the informationA matching item typically involves matching items from one column with items in another column based on their relationship or similarity. While there may be some subjectivity involved in determining the correct matches, it usually allows for a more objective evaluation compared to essay or short-answer questions, which can be more open-ended and subjective in nature.
The options "true" and "false" are objective items that typically involve selecting the correct statement among the two provided choices.
Learn more about curve on
https://brainly.com/question/31376454
#SPJ4
use normal vectors to determine the intersection, if any, for for following group of three planes. give a geometric interpretation of your result and state the number of solutions for the corresponding linear system of equations.
x-y+z=-2
2x-y-2z =-9
3x+y-z=-2
b. if the planes intersect in a line, determine a vector equation of the line. if the planes intersect in a point, the corridinates of the point
The three planes intersect at a single point with coordinates (-3, -1, 0). Geometrically, this means that the three planes intersect at a specific point in three-dimensional space. The corresponding linear system of equations has a unique solution.
To determine the intersection of the three planes, we can first find the normal vectors of each plane. The normal vectors are obtained by taking the coefficients of x, y, and z in the equation of each plane.
The normal vectors for the three planes are:
Plane 1: (1, -1, 1)
Plane 2: (2, -1, -2)
Plane 3: (3, 1, -1)
Since the planes intersect, their normal vectors must be linearly independent. We can check this by forming a 3x3 matrix with the normal vectors as rows and computing its determinant. If the determinant is non-zero, the vectors are linearly independent. The determinant of the matrix [ (1, -1, 1), (2, -1, -2), (3, 1, -1) ] is 6, which is non-zero. Therefore, the normal vectors are linearly independent, and the three planes intersect at a single point. To find the coordinates of the intersection point, we can solve the corresponding linear system of equations formed by the three plane equations:
x - y + z = -2
2x - y - 2z = -9
3x + y - z = -2
Solving this system, we find that x = -3, y = -1, and z = 0. Therefore, the three planes intersect at the point (-3, -1, 0). Geometrically, this means that the three planes intersect at a specific point in three-dimensional space. The vector equation of the line formed by the intersection of the planes is r = (-3, -1, 0) + t(0, 0, 0), where t is a parameter representing any real number. Since there is only one point of intersection, the linear system of equations has a unique solution.
learn more about vectors here:
https://brainly.com/question/24256726?
#SPJ11
Construct a grammar over {a, b} whose language is {a mb n : 0 ≤ n ≤ m ≤ 3n}
To construct a grammar over {a, b} whose language is {a mb n : 0 ≤ n ≤ m ≤ 3n}, the following rules can be used: S → AB | BABA → aAb | aSb | bA | bB | AAB → aAb | aSb | bAS → In the above grammar rules, S is the starting symbol. Now, let's check if this grammar is fulfilling the given requirements or not. Let's start with the base condition i.e., n = 0If n = 0, then the language is {ε} and S → ε is a valid rule.
Next, let's check for n = 1If n = 1, the language is {a, ab} and A → a, B → b or A → aSb are valid rules for generating these strings. Now, let's check for n = 2If n = 2, the language is {aa, aab, abb, abbb} and the following rules are valid: A → aAbB → bBaS → AB or B |
Thus, all the strings can be generated using the above rules. Lastly, let's check for n = 3If n = 3, the language is {aaa, aaab, aabb, aabbb, abbb, abbbb, bbb, bbbb} and the following rules are valid:A → aAbB → bBaS → AB or B | Thus, all the strings can be generated using the above rules. Hence, the grammar over {a, b} whose language is {a mb n : 0 ≤ n ≤ m ≤ 3n} is S → AB | BABA → aAb | aSb | bA | bB | AAB → aAb | aSb | bAS.
To know more about Grammar rules, click here:
https://brainly.com/question/30235282
#SPJ11
Question 3
Suppose X N(20,5)
(a) Find:
(i) P(X> 18) (5 marks)
(ii) P(7 < X < 15) (5 marks)
(b) Find the value a such that P(20-a < X < 20+ a) = 0.99 (10 marks)
(c) Find the value b such that P(20-b< X < 20+ b) = 0.95 (10 marks)
a) (i) We have to find P(X > 18), given that X ~ N(20,5) = 0.1859
(ii) Similarly, we can find P(7 < X < 15) = 0.9818
b) The normal distribution is a continuous probability distribution that is symmetric and bell-shaped, and value = 4.576
a) Using the standard normal distribution table
Since X follows a normal distribution with mean 20 and variance 5, we have:
Z = (X - μ)/σ = (X - 20)/√5 ~ N(0,1)
We can now find P(X > 18) by standardizing and using the standard normal distribution table:
P(X > 18) = P(Z < (18 - 20)/√5)
= P(Z < -0.8944)
= 0.1859
(ii) Similarly, we can find P(7 < X < 15) as follows:
Z1 = (7 - 20)/√5 = -4.62, Z2
= (15 - 20)/√5
= -2.24P(7 < X < 15)
= P(Z1 < Z < Z2)
= P(Z < -2.24) - P(Z < -4.62)
= 0.9854 - 0.0036
= 0.9818
(b) We have to find the value of a such that P(20 - a < X < 20 + a) = 0.99
Given that X ~ N(20, 5), we know that:
P(20 - a < X < 20 + a) = 0.99
= P((20 - a - 20)/√5 < Z < (20 + a - 20)/√5)
= P(-a/√5 < Z < a/√5)
= 0.99
This means that we need to find the value of a such that:
P(-a/√5 < Z < a/√5)
= 0.99 - 0.01/2
= 0.985.
Using the standard normal distribution table, we can find that:
P(Z < a/√5) - P(Z < -a/√5)
= 0.985P(Z < a/√5) - [1 - P(Z < a/√5)]
= 0.9852P(Z < a/√5)
= 0.9925P(Z < a/√5)
= 2.05 (from standard normal distribution table)
Therefore, a/√5 = 2.05
=> a = 2.05√5
= 4.576
(c) We have to find the value of b such that P(20 - b < X < 20 + b) = 0.95
Given that X ~ N(20, 5), we know that:
P(20 - b < X < 20 + b) = 0.95
= P((20 - b - 20)/√5 < Z < (20 + b - 20)/√5)
= P(-b/√5 < Z < b/√5)
= 0.95
This means that we need to find the value of b such that:
P(-b/√5 < Z < b/√5)
= 0.95 - 0.05/2
= 0.975.
Using the standard normal distribution table, we can find that:
P(Z < b/√5) - P(Z < -b/√5)
= 0.975P(Z < b/√5) - [1 - P(Z < b/√5)]
= 0.9752P(Z < b/√5)
= 0.9875P(Z < b/√5)
= 1.96 (from standard normal distribution table)
Therefore, b/√5 = 1.96
b = 1.96√5
= 4.39.
The normal distribution is a continuous probability distribution that is symmetric and bell-shaped.
It is denoted by N(μ, σ), where μ is the mean and σ is the standard deviation.
In this question, we were given that X follows a normal distribution with mean 20 and standard deviation 5.
To find the probability of X falling within a certain range, we standardize X to obtain Z ~ N(0,1) using the formula Z
= (X - μ)/σ.
We can then use the standard normal distribution table to find the required probabilities.
To find the value of a such that P(20 - a < X < 20 + a) = 0.99,
we needed to find the value of a such that P(-a/√5 < Z < a/√5) = 0.985.
To find the value of b such that P(20 - b < X < 20 + b) = 0.95,
we needed to find the value of b such that P(-b/√5 < Z < b/√5) = 0.975.
To know more about distribution table , visit:
https://brainly.com/question/30404847
#SPJ11
Let E and F be events with P(E) = 0.3, P(F) = 0.6 and P(EU F) = 0.7 a. P( EF) b. P(E|F) PECF) d. P( EF)
a. P(E ∩ F) = 0.2
b. P(E|F) ≈ 0.333 or 33.3%
c. P(E ∪ F) = 0.7
d. P(E ∩ F) = 0.2
a. P(E ∩ F):
To find the probability of the intersection of events E and F, denoted as E ∩ F, we use the formula:
P(E ∩ F) = P(E) + P(F) - P(E ∪ F).
Given that P(E) = 0.3, P(F) = 0.6, and P(E ∪ F) = 0.7, we can substitute these values into the formula:
P(E ∩ F) = 0.3 + 0.6 - 0.7 = 0.2.
Therefore, the probability of the intersection of events E and F, P(E ∩ F), is 0.2.
b. P(E|F):
To find the conditional probability of event E given event F, denoted as P(E|F), we use the formula:
P(E|F) = P(E ∩ F) / P(F).
We have already determined that P(E ∩ F) = 0.2 and given that P(F) = 0.6, we can substitute these values into the formula:
P(E|F) = 0.2 / 0.6 = 1/3 ≈ 0.333.
Therefore, the conditional probability of event E given event F, P(E|F), is approximately 0.333 or 33.3%.
c. P(E U F):
The probability of the union of events E and F, denoted as E ∪ F, is already given as P(E ∪ F) = 0.7.
d. P(E ∩ F):
We have already determined in part a that P(E ∩ F) = 0.2. Therefore, this is the probability of the intersection of events E and F.
To know more about the probability, click here;
https://brainly.com/question/31828911
#SPJ11
The scores of students on the SAT college entrance examinations at a certain high school had a normal distribution with mean u and standard deviation o = 26.5. (a) What is the probability that a single student randomly chosen from all those taking the test scores 549 or higher? ANSWER: For parts (b) through (d), consider a simple random sample (SRS) of 30 students who took the test. (b) What are the mean and standard deviation of the sample mean score ł, of 30 students? The mean of the sampling distribution for ž is: The standard deviation of the sampling distribution for ž is: (c) What z-score corresponds to the mean score 7 of 549?
The correct value of μ = 549 - (z * 26.5) and (549 - μ) / 26.5 = z
(a) To find the probability that a single student randomly chosen from all those taking the test scores 549 or higher, we need to calculate the z-score and then find the corresponding probability using the standard normal distribution.
The z-score formula is given by:
z = (x - μ) / σ
Where:
x = value we are interested in (549)
μ = mean of the distribution (unknown in this case)
σ = standard deviation of the distribution (26.5)
To find the z-score, we rearrange the formula:
z = (x - μ) / σ
(z * σ) + μ = x
μ = x - (z * σ)
Now we can substitute the values and calculate μ:
μ = 549 - (z * 26.5)
To find the probability, we need to calculate the z-score corresponding to the value 549. Since the distribution is normal, we can use a standard normal distribution table or a calculator to find the probability associated with that z-score.
(b) The mean and standard deviation of the sample mean score, Ł (pronounced "x-bar"), of 30 students can be calculated using the formulas:
Mean of the Sampling Distribution (Ł) = μ
Standard Deviation of the Sampling Distribution (σŁ) = σ / sqrt(n)
Where:
μ = population mean (unknown in this case)
σ = population standard deviation (26.5)
n = sample size (30)
(c) To find the z-score that corresponds to the mean score of 549, we use the same formula as in part (a):
z = (x - μ) / σ
Substituting the values:
z = (549 - μ) / 26.5
Since we are given the mean score and need to find the z-score, we rearrange the formula:
(549 - μ) / 26.5 = z
Now we can solve for z.
Please note that the solution to part (a) will provide the value of μ, which is needed to answer parts (b) and (c).
Learn more about statistics here:
https://brainly.com/question/11679822
#SPJ11
The joint probability density of the two random variables X and Y is given by ye-v(+1) if x ≥ 0, y ≥ 0 f(x, y) = 0 else. a) Show that f(x, y) is indeed a probability density,
After considering the given data we conclude f(x, y) is not a probability density, since it does not satisfy the second condition.
To describe that f(x, y) is indeed a probability density, we have to verify that it satisfies the following two conditions:
f(x, y) is non-negative for all values of x and y.
The integral of f(x, y) over the entire plane is equal to 1.
For the joint probability density function [tex]f(x, y) = ye^{(-v) (+1)} if x \geq 0, y \geq 0[/tex]and f(x, y) = 0 otherwise, we can describe that it satisfies both of these conditions as follows:
For all values of x and y, we have
[tex]f(x, y) = ye^{(-v) (+1)} if x \geq 0, y \geq 0 and f(x, y) = 0[/tex] otherwise.
Then y and [tex]e^{(-v) (+1)}[/tex] are both non-negative for all values of x and y, it follows that f(x, y) is non-negative for all values of x and y.
To evaluate the integral of f(x, y) over the entire plane, we can integrate f(x, y) with concerning both x and y over their entire ranges:
[tex]\int \int f(x, y) dxdy = \intb\int ye^{(-v)(+1)} dx dy[/tex]
Since the function [tex]ye^{(-v) (+1)}[/tex] is non-negative for all values of x and y, we can integrate it over the entire plane by integrating it over the first quadrant and then multiplying by 4:
[tex]\int\int ye^{(-v) (+1)} dx dy = 4\int\int ye^{(-v) (+1)} dx dy[/tex]
[tex]= 4\int0\int\infty ye^{(-v) (+1)} dx dy[/tex]
[tex]= 4\int0\infty y \int0\infinity e^{(-v) (+1)} dx dy[/tex]
[tex]= 4\int 0\infty y [-e^{(-v) (+1)} ]0\infty dy[/tex]
[tex]= 4\int0\infty y (0 - (-1)) dy[/tex]
[tex]= 4\int 0\infty y dy[/tex]
[tex]= 4[(y^2)/2]0\infty[/tex]
[tex]= 2\infty ^2[/tex]
[tex]= \infty[/tex]
Therefore, the integral of f(x, y) over the entire plane is equal to[tex]\infty[/tex] , which means that f(x, y) is not a probability density.
To learn more about probability density function
https://brainly.com/question/30403935
#SPJ4
3 friends ordered 2 pizzas of 6 slices each and ate equal amounts, how many slices did each person eat?
A 1
B 2
C 3
D 4
Answer:
Option D, 4
Step-by-step explanation:
2 pizzas x 6 slices per pizza = 12 slices of pizza
12 slices of pizza divided by 3 friends eating equal slices = 4 slices per friend
Option D, 4, is your answer