Answers
Answer:
As position is the product of velocity and time, the area under the velocity-time curve will be the position.
Between 2 and 4 s, the area increases linearly to 20(4) = 80
Between 4 and 6 s, the additional area is 0(2) = 0
Between 6 and 8 s the area increases linearly by -10(2) = -20
which is a decrease.
In the angular-position vs time graph; The angular position is derived from the area under the velocity vs time graph
Attached below is the angular position vs time graph
Given that : Angular position = Angular Velocity * time
As Time increases from 0 to 4 secs the area increases from 0 to 80 rad
As Time increases from 4 to 6 secs the area remains constant i.e. 0 rad
As Time increases from 6 to 8 secs the area under the graph decreases 80 to 60 rad
Hence we can conclude that the Angular position of the graph is derived from the area under the velocity vs time graph.
Learn more : https://brainly.com/question/23832769
Related Questions
a boy pull a toy car with a rope inclined at 60° to the vertical tension in the rope is 100N find the force of the lift car and drag the car along the ground
Answers
A pyramid was built with approximately 2.3 million stone blocks, each weighing 2.4 tons (1 ton = 2,000 lbm). Find the mass of the pyramid in kg.
Answers
Total weight in tons
[tex]\\ \sf\longmapsto 2.3\times 10^6\times 2.4[/tex]
[tex]\\ \sf\longmapsto 5.52\times 10^6[/tex]
[tex]\\ \sf\longmapsto 5520000ton[/tex]
1ton=1000kg[tex]\\ \sf\longmapsto 5520000\times 1000[/tex]
[tex]\\ \sf\longmapsto 5520000000kg[/tex]
[tex]\\ \sf\longmapsto 5.52\times 10^9Kg[/tex]
Together a car and its driver have a mass of 1234 kg. The car is slowed with an acceleration of -4.5 m/s2. What is the net force on the car?
Answers
Answer:
-5553N
Explanation:
Fnet = ma
Fnet = 1234kg * -4.5m/s^2
Fnet = -5553N
which of the following is considered the "universal wave formula?"
1.T=1/f
2.v=fλ
3.λ=vf
4.f=vλ
Answers
Explanation:
2. v=fλ
HOPE IT HELPS YA_______________________
why a switch is connected in phase wire and never is neutral wire?
Answers
Answer:
ifyou have a wre connect you should not have to connected
i think that is the answer
what is the negative of a vector
Answers
Answer:
A negative of a vector represents the direction opposite to the reference direction
Explanation:
It means that the magnitude of two vectors or same but they are opposite in direction . For example if A and B are two vectors that have equal magnitude but opposite in direction , then vector A is negative of vector B.
Two objects are sitting 150 meters apart and are not moving. Which best explains why the gravitational force does not cause them to move?
Answers
In the above pic question is similar like that only
Answer:
The gravitational force between the two objects is weak because their masses are small
Did the heliocentric model explain the drawbacks of the geocentric model?
Answers
Answer:
uuuugggghhhhhhhhggggffffffffffffff
Answer:
The geocentric model could not fully explain these changes in the appearance of the inferior planets (the planets between the Earth and the Sun). Furthermore, Galileo's observations of Jupiter's moons made it clear that celestial bodies do move about centers other than the Earth.
Mark me as the brainlist
50 point!! Will mark brainliest!! (Please help)
What variable is impacting demand and is it increasing or decreasing based on the scenario.
With the threat of a blizzard people believe the price of snow blowers will increase.
What is the varaible? _____
What happens to demand? _____
Answers
What is the variable?
~the price is the variable.
What happens to demand?
~It'll go down. Since the price of snow blowers will increase then the quantity demanded will go down.
Hope this helps- have a good day bro cya)
I agree with the other answer
What is the variable?
~the price is the variable.
What happens to demand?
~It'll go down. Since the price of snow blowers will increase then the quantity demanded will go down.
Logical thought is based on ____________, while creative problem solving uses ___________.
A.
insight; algorithms
B.
divergent thinking; convergent thinking
C.
convergent thinking; divergent thinking
D.
functional fixedness; mental sets
Answers
Answer:
D. and A
Explanation:
logical thought is base on functional fixedness; mental sets while creative problem solving uses insight; algorithms.
Classify the following as reversible or irreversible changes a) ripening of mango b) evaporation of water c) melting of ice candy d) curdling of milk
Answers
c) melting of ice candy is an physical change
hope it helps
The scientific method is
.linear or cyclic
Answers
the scientific method is described as self-correcting and cyclical therefore it ain't linear but cyclic.
Hope this helped you- have a good day bro cya)
What is defined as the isolation and reduction of variables in an experiment in order to understand the impact of a specific variable or variables on the outcome of the study?
Answers
aisnhsjdjxbxbxhxbxjx
Isolation and reduction of variables in an experiment is a way to reduce administrative efforts, costs and delusions occur.
What is an experiment?An experiment is a technique used to prove or disprove a theory, or to test the efficacy or probability of something that has never been done before.
Experiments reveal cause-and-effect relationships by illustrating what happens when a specific component is changed.
Experiments have a wide range of goals and scales, but they always rely on a repeatable technique and rational interpretation of the outcomes. Natural experimental research is also available.
If you can plan a control group, you will be much better off. It increases the expense of the experiment by a factor of two and may cause delusions.
Furthermore, it doubles the administrative effort. However, it provides the most reliable and straightforward method for calculating significance,
By comparison, taking into consideration the deviations of each of the two groups of data that arise.
In many circumstances, a control group is required for analysis when you wish to look at certain lag periods or increases in addition to the final result.
Hence isolation and reduction of variables in an experiment are much more important to reduce.
To learn more about the experiment refer to the link;
https://brainly.com/question/11256472
(Plzzzz help!!!) (50 points!!!)
1. Write the following quantities in scientific notation:
(1) 10130 Pa to 2 decimal places
(2) 978,15 m·s−2
to one decimal place
(3) 0,000001256 A to 3 decimal places
Answers
Answer:
YEAH THE PERSON ABOVE ME IS RIGHT MARK
THEM BRAINLIST
when a light ray enters the glass block it:
(a ) speeds up (b) slows down (c ) spreads out
Answers
Answer:
If a ray of light hits the surface of a sheet of glass, some light will be reflected by the surface of the glass. However, much of the light will pass through the glass, because glass is transparent. ... This 'bending of a ray of light' when it passes from one substance into another substance is called refraction.
Explanation:
Two masses m1 13.6 kg and m2 22.9 kg are connected by a rope that hangs over the pulley. The pulley has form of solid cylinder of radius 0.6 m and mass 10.6 kg. Initially m1 is on the ground and m2 rests 8.0 m above the ground. At some moment system is released. Find velocity of m2 just before it hits the ground. Neglect friction in the pulley.
Answers
The conservation of energy allows finding the result of the velocity of the body 2 when it reaches the ground is:
v = 6.32 m / s
Given parameters
Body mass 1 m₁ = 13.6 kg body mass 2 m₂ = 22.9 kg height y = 8.0 mTo find
speed.
The conservation of energy is one of the most important principles of physics, it establishes that if there is no friction force, the mechanical energy is conserved at all points, where the mechanical energy is the sum of the kinetic energy plus the different potential energies.
Let's write the energy at two points before we drop the system.
Em₀ = U₁ + U₂
Where potential energy is
U = m g y
They indicate that body 1 is on the ground and body 2 is at a height .
y₂ = 8 m
Em₀ = m₂ g y₂
Let's write the energy of the system for when body 2 is reaching the ground
[tex]Em_f[/tex] = K₂ + K₁ + U₂ + U₁
At this moment body 2 is reaching the ground, its height is zero and the height of body 1 is y₁ = 8 m. Since the two bodies are joined by the rope, they must have the same speed..
[tex]Em_f[/tex] = ½ (m₁ + m₂) v² + m₁ g y₁
As there is no friction, the energy is conserved.
Em₀ = Em_f
m₂ g y₂ = ½ (m₁ + m₂) v² + m₁ g y₁
The rope is inextensible, the heights are equal.
y₁ = y₂ = y = 8.0 m
v² = [tex]\frac{m2-m1}{m2+m1} \ 2g y[/tex]
Let's calculate.
[tex]v^2 =\frac{22.9-13.6}{ 22.9+13.6} \ 2 \ 9.8 \ 8 \\ v = \sqrt{39.95}[/tex]
v = 6.32 m / s
In conclusion using the conservation of energy we can find the result of the velocity when the body 2 reaches the ground is:
v = 6.32 m / s
Learn more here: brainly.com/question/14688403
If Janie puts her hand on a cold metal doorknob, how will thermal energy move?
A- Cold moves from the doorknob to her hand.
B - Heat moves from her hand to the doorknob.
C- Heat moves from the doorknob to her hand.
D- Cold moves from her hand to the doorknob.
Answers
Answer:
it is b or c
Explanation:
Answer:
The answer is B I did the test.
Explanation:
I hope it helps!
Un rió de 89 m de ancho fluye agua con una velocidad de 4.0 m/s hacia el este . Si el bote tiene una velocidad de 8 m/s con relación al agua.
Que distancia rio abajo se desplaza el bote al cruzar el rió.
Answers
6
Explanation:
yhhhunkmombfdcgjjyvunkkbdsfgbjjj
La distancia que el bote se desplaza rio abajo es 44.5 metros.
¿Que distancia rio abajo se desplaza el bote?
Debemos recordar que la velocidad en cada eje es independiente de la velocidad en el otro eje. Tambien recordar que:
distancia = velocidad*tiempo.
Esto quiere decir que si el bote se mueve a 8m/s de un extremo al otro del rio, esta velocidad en esta dirección se va a mantener.
Entonces el tiempo que tarda en viajar 89 metros (el ancho del rio) a una velocidad de 8m/s es:
T = (89 m)/(8m/s) = 11.125 segundos.
Ahora notamos que durante esos 11.125 segundos el bote tambien se mueve siguiendo el flujo del rio, a una velocidad de 4.0 m/s, entonces la distancia que el bote se desplaza rio abajo es:
D = 11.125s*4.0m/s = 44.5 metros
Sí quieres aprender mas sobre velocidad, puedes leer:
https://brainly.com/question/25316464
what is the radiation?
Answers
Answer:
Radiation is the transfer of energy through waves (electromagnetic radiation) or fast traveling particles (particulate radiation). Radiation can be in the form of heat, sound and light. Radiation can be felt or seen like light or detected through special instruments like X-ray. Radiation from a hot object is shorter..
Explanation:
Dato
F=0.0000001245066 N
Answers
Answer:
hpqfie
Explanation:
wdq i love math WOOOOO
A simple pendulum is made of a small blob of mass m=7.000 kg attached to the end of an inextensible wire. The angular amplitude of oscillation is θ=5.730°. Consider that the gravitational acceleration is g=9.807 m/[tex]s^{2}[/tex]. What is the magnitude of the tension in the wire when the blob is directly below its point of support?
Answers
Answer:
The tension must be equal to the weight of the bob plus the centripetal force that is provided at eth end of the motion.
h = L (1 - cos theta) where h is the height to which the bob is raised
cos 5.730 = .995
h = .005 L
Also 1/2 m v^2 = m g h speed of the bob at the bottom
v^2 = 2 g h = .01 g L where 2 h = .01 L
v^2 / L = .01 g
m v^2 / L = .010 g m = .07 g since m = 7
Total tension = m g (1 + .07) = 1.07 m g
T = 9.807 * 1.07 * 7 = 73.45 kg m / s^2
Which of the following choices is the most important to do before starting an exercise program?
A. see your doctor
B. talk to your friends for advice
C. lift some weights
D. measure your body fat
Please select the best answer from the choices provided.
O O O O
Answers
A car is being driven along a road at 25m/s when the driver suddenly notices that there is a fallen tree blocking the road 65m ahead. The driver immediately applies the brakes giving the car a constant velocity of 5m/s2. How far in front of the tree does the car come to rest?
Answers
Hi there!
We can use the following equation to solve for displacement:
vf² = vi² + 2ad, where:
vf = final velocity
vi = initial velocity
a = acceleration
d = displacement
Since the car will come to rest, vf = 0, so:
0 = vi² + 2ad
Plug in the given values:
0 = 25² + 2(-5)d (Breaking is a negative acceleration in this instance)
Solve:
0 = 25² - 10d
10d = 625
d = 62.5m
Subtract from the total distance from the car to the tree:
65 - 62.5 = 2.5m
A tennis ball is hit straight upwards and undergoes a free fall
motion as it rises towards its highest point and then fall back
downward to the ground. What changes, if any, would be
observed of the velocity and the acceleration of the tennis
ball as it falls downward from its highest point? Pick two
answers.
The velocity increases, decreases, remains constant
The acceleration increases, decreases, remains constant
Answers
Answer:velocity - decreases
acceleration remains constant
Explanation:
A basketball player throws a ball horizontally toward another player 10 meters away. If the ball is
traveling at a speed of 20 m/s, neglecting air friction, how long does it take for the ball to get to the
other player?
Thank you!!!
Answers
Answer:
It will take 0.46 seconds to reach home plate by ball.
Explanation:
a___of water a. of bread a. of soap a. of juice a. salt. a. sand a. of glass a. of corn fill in the blanks I follow him but right answer
Answers
Answer:
a glass of water. a loaf of bread. a bar of soap.a packet of juice. a pinch of salt.
Explanation:
that's all I know
Write a scientific explanation to describe where earthquakes and volcanoes most commonly occur and their relation to plate boundaries .
Answers
For Part A, Sebastian decided to use the copper cylinder. How would the magnitude of his q and ∆H compare if he were to redo Part A but this time using an aluminum cylinder of equal mass? Assume that the initial temperatures of the metals (Tm) and the initial temperatures of the water (Ti) were the same. Specific heat of copper: 0.385 J/g*K Specific heat of aluminum: 0.900 J/g*K Group of answer choices The magnitudes of his q and ∆H for the copper trial would be higher than the aluminum trial. The magnitudes of his q and ∆H for both trials would be the same The magnitudes of his q and ∆H for the copper trial would be lower than the aluminum trial.
Answers
The magnitudes of his q and ∆H for the copper trial would be lower than the aluminum trial.
The given parameters;
initial temperature of metals, = [tex]T_m[/tex]initial temperature of water, = [tex]T_i[/tex] specific heat capacity of copper, [tex]C_p[/tex] = 0.385 J/g.Kspecific heat capacity of aluminum, [tex]C_A[/tex] = 0.9 J/g.Kboth metals have equal mass = mThe quantity of heat transferred by each metal is calculated as follows;
Q = mcΔt
For copper metal, the quantity of heat transferred is calculated as;
[tex]Q_p = (m_wc_w + m_pc_p)(T_m - T_i)\\\\Q_p = (T_m - T_i)(m_wc_w ) + (T_m - T_i)(m_pc_p)\\\\Q_p = (T_m - T_i)(m_wc_w ) + 0.385m_p(T_m - T_i)\\\\m_p = m\\\\Q_p = (T_m - T_i)(m_wc_w ) + 0.385m(T_m - T_i)\\\\let \ (T_m - T_i)(m_wc_w ) = Q_i, \ \ \ and \ let \ (T_m- T_i) = \Delta t\\\\Q_p = Q_i + 0.385m\Delta t[/tex]
The change in heat energy for copper metal;
[tex]\Delta H = Q_p - Q_i\\\\\Delta H = (Q_i + 0.385m \Delta t) - Q_i\\\\\Delta H = 0.385 m \Delta t[/tex]
For aluminum metal, the quantity of heat transferred is calculated as;
[tex]Q_A = (m_wc_w + m_Ac_A)(T_m - T_i)\\\\Q_A = (T_m -T_i)(m_wc_w) + (T_m -T_i) (m_Ac_A)\\\\let \ (T_m -T_i)(m_wc_w) = Q_i, \ and \ let (T_m - T_i) = \Delta t\\\\Q_A = Q_i \ + \ m_Ac_A\Delta t\\\\m_A = m\\\\Q_A = Q_i \ + \ 0.9m\Delta t[/tex]
The change in heat energy for aluminum metal ;
[tex]\Delta H = Q_A - Q_i\\\\\Delta H = (Q_i + 0.9m\Delta t) - Q_i\\\\\Delta H = 0.9m\Delta t[/tex]
Thus, we can conclude that the magnitudes of his q and ∆H for the copper trial would be lower than the aluminum trial.
Learn more here:https://brainly.com/question/15345295
Which of these examples best illustrates Newton’s second law of motion
A a 100 lb boy has twice as much inertia as a 200 lb on boy.
B a truck need a more powerful engine then a small car.
C A hockey puck slides easily across the ice.
D A satellite stays in orbit for a long time.
Answers
Answer:
C )A hockey puck slides easily across the ice.
Calculations, show formula, substitution, and answer with units for full credit:
1. A train travels 150 kilometers in 5 hours. How fast is it traveling?
Answers
Answer:
30 km/h
Explanation:
V=S:t
speed=length:time
150:5=30