Dew point for a day's weather is calculated to be 18°C, then the statement that is true based on the dew point is a)Water will condense if the air temperature drops below 18°C.
What is dew point?Dew point is that temperature to which air must be cooled to become saturated with water.
When it is cooled below the dew point, moisture capacity is reduced and water vapor will condense to form dew. When this takes place via contact with colder surface, dew will form on surface.
Dew point is affected by humidity. When there is more moisture in air , then dew point is higher.
To know more about dew point, refer
https://brainly.com/question/12485698
#SPJ1
What is the molar mass of an element that has a mass of 10.4 grams and contains
0.129 moles?
Br
As
Se
K
Answer:
Explanation:
10.4/.129=80.6201 find the Atomic weight of which element has approx. 80.6201
Br has an atomic number that is closest at 79.904
Which part of Earth experiences physical weathering? (1 point)
crust
mantle
inner core
outer core
Answer:
crust
Explanation:
it is on the outside so it is exposed to physical weathering
The part of the Earth that experiences physical weathering is the crust. Therefore, option (A) is correct.
Physical weathering is when rocks and minerals break down through mechanical means, but their chemical make-up doesn't change. The topmost layer of the Earth, called the crust, is changed by things like temperature changes, friction, frost action, and the actions of wind, water, and ice.
These things can crack, break, and erode rocks, causing them to break up physically into smaller pieces without changing their chemical makeup. The Earth's mantle, inner core, and outer core, on the other hand, are not directly visible to the surface and do not go through the same physical processes that cause the crust to break down.
Learn more about Physical weathering, here:
https://brainly.com/question/23449272
#SPJ6
Carbon dioxide formation
Carbon dioxide is generated when any substance that contains carbon is burned. It is also a product of respiration and fermentation. Plants absorb carbon dioxide during photosynthesis.
Which of the following animals are an example of coevolution? *
Acacia ant and acacias animals are an example of coevolution
Coevolution is the reciprocal evolutionary change in a set of interacting population over time resulting from the interaction between those population and an example of coevolution that is not characteristics of an arm race but one which provides a mutual benefit to both a plant species and insect is that of the acacia ant and acacia plant and many cases of coevolution can be found between plants and insects
Know more about animal
https://brainly.com/question/28711835
#SPJ1
A weather balloon has a volume of 556 L when filled with helium at 30 C at a pressure of 386 torr. What is the new volume of the balloon (in liters) if the balloon rises to a point where the air
pressure is 229 torr and the temperature is -9 C
The new volume of the balloon will be 484.43 L.
This is an example of Charles' law, sometimes called the temperature-volume law. It states that the volume of a gas is directly proportional to the Kelvin temperature, while pressure and amount are held constant.
The equation is V1/T1=V2/T2, where V is volume and T is temperature in Kelvins.
Known
V1=556 L
T1=30∘C+273.15=303 K
T2=-9∘C+273.15=264 K
Unknown
V2
Solution
Rearrange the equation to isolate V2. Substitute the known values into the equation and solve.
V2=V1T2/T1
V2=(556L×264K)/303K=484.43 L.
To know more about Charles law
https://brainly.com/question/16927784
#SPJ1
PLEASE HELP ASAP DUE TOMMOROW! (35 POINTS)
Were you able to correctly identify all of the minerals on the first try? Which identification test did you enjoy most? Why? Which identification test did you think was least helpful for identification? Why?
( 1 or more paragraphs please)
1 According to the law of conservation of mass, the total mass of the reacting substances is
A always more than the total mass of the products.
B always less than the total mass of the products.
C sometimes more and sometimes less than the total mass of the products.
D always equal to the total mass of the products.
According to the law of conservation of mass, the total mass of the reacting substances is
A. always more than the total mass of the products.
B. always less than the total mass of the products.
C. sometimes more and sometimes less than the total mass of the products.
D. always equal to the total mass of the products.
This is the one that I would have to choose.
Hope this helps:)
Please answer for my final ASAP
The table below shows the average wind speeds of four hurricanes in Florida.
Florida Hurricanes
Hurricane Average Wind Speed
(miles per hour)
A 160
B 95
C 140
D 103
Which hurricane most likely caused the greatest damage?
The hurricane that will most likely caused the greatest damage is option A: 140.
What is category 5 hurricane?It is one whose speed is 157 mph or more - There will be catastrophic damage: With complete roof failure and wall collapse, a significant portion of frame homes will be lost. Residential areas will be cut off by downed trees and utility poles. Power outages could linger for several weeks or even months. For several weeks or months, the majority of the area won't be habitable.
The most destructive storms are those in category 5, which have sustained winds of at least 157 mph.
Therefore, here, there is complete roof failure and wall collapse, a significant portion of frame homes will be lost. Residential areas will become isolated by downed trees and power lines. Power outages could linger for several weeks or even months.
Learn more about hurricane from
https://brainly.com/question/18221136
#SPJ1
A 53.5 mL sample of an 5.4 % (m / v) KBr solution is diluted with water so that the final volume is 205.0 mL Express your answer to two significant figures and include the appropriate units
From the dilution formula, the final concentration of the solution is 1.4 %.
What is the final concentration?The final concentration is the concentration at the end of the dilution. We know that dilution is the process by which we add more water to the solution.
Now we have the following;
Initial concentration C1 = 5.4 %
Initial volume V1= 53.5 mL
Final concentration C2= ?
Fina volume V2= 205.0 mL
C1V1 = C2V2
C2 = 5.4 * 53.5/205.0
C2 = 1.4 %
Hence, we have a solution that would have a final concentration of 1.4 %.
Learn more about dilution formula:https://brainly.com/question/7208546
#SPJ1
as a sample of radon decays by alpha emission, the number of daughter isotopes……..
When a sample of radon decays by alpha emission, the number of daughter isotopes is two.
What is radioactive decay?Radioactive decay refers to the process by which the nucleus of an atom decays spontaneously with the emission of radiation and the formation of one or more new daughter atoms with as smaller nuclei.
The emission of an alpha particle during radioactive decay involves the emission of helium nuclei.
The emission of alpha particles by radon is shown below:
²²²₈₆Ra ---> ²¹⁸₈₄Po + ⁴₂He
Learn more about radioactive decay at: https://brainly.com/question/24115447
#SPJ1
Step 3: Apply the scaling factor to the empirical formula. The scale factor is 5 and the empirical formula is CH2O.
What is the molecular formula?
C?H?O?
The molecular formula is (CH2O)5 when the scale factor is 5 and the empirical formula is CH2O.
Considering the question given above, the following data were obtained:
Empirical formula is CH₂O
Molar mass of compound = 150 g/mol
Scaling factor (n) =?
Empirical formula × n = molar mass
[CH₂O]n = 150
[12 + (2×1) + 16]n = 150
[12 + 2 + 16]n = 150
30n = 150
Divide both sides by 30
n = 5
Therefore, the scaling factor is 5
A scale factor is a ratio between corresponding measurements of an object and a representation of that object.In chemistry, the empirical formula of a chemical compound is the simplest whole-number ratio of atoms present in a compound. .Learn more about empirical formula at:
https://brainly.com/question/14044066
#SPJ1
Answer:
C 5 H 10 O 5
Explanation:
A protein subunit from an enzyme is part of a research study and needs to be characterized. A total of 0.135 g of this subunit was dissolved in enough water to produce 2.00 mL of solution. At 28 ∘C the osmotic pressure produced by the solution was 0.138 atm . What is the molar mass of the protein?
The molar mass of the protein under the conditions that we have in this question can be obtained to be 12065 g/mol.
What is the molar mass of the protein?We know that the osmotic pressure is one the colligative properties of the solution. The colligative properties are the properties that depend on the amount of substance that is present in the solution.
Mass of the protein = 0.135 g
Volume of the solution = 2.00 mL
Temperature of the system = 28 ∘C + 273 = 301 K
Osmotic pressure of the solution = 0.138 atm
We can get the osmotic pressure from;
π = iCRT
π = Omotic pressure
i = Van't Hoff factor
C = concentration of the solution
R = gas constant
T = temperature
Let the molar mass of the protein be M
0.138 = 1 * 0.135/M/0.002 * 0.082 * 301
0.138 = 1 * 0.135/0.002M * 0.082 * 301
0.138 = 3.33/0.002M
0.138 * 0.002M = 3.33
M = 3.33/0.138 * 0.002
M = 12065 g/mol
Learn more about molar mass:https://brainly.com/question/12127540
#SPJ1
Consider the following equilibrium system:
CH4 + H2O +energy ⇌CO + 3H2
In which of the following combinations will both stresses shift the equilibrium to the right? explain.
A) A decrease in temperature and a decrease in volume
B) A decrease in temperature and a increase in volume
C) An increase in temperature and a decrease in volume
D) An increase in temperature and an increase in volume
Answer:D. an increase in temperature and an increase in volume
Explanation: Heat is a reaction, so if you increase the temperature of the system, you increase the amount of reactants. Thus, higher temperature would push equilibrium toward the products, the right. The products, however, have 4 molecules in comparison to the reactants’ 2, and so you have to increase the volume to push equilibrium that way as well.
What is the pH of a solution that has [H3O+] = 6.0 x 10-³ M?
Answer:
2.2
Explanation:
How many grams of calcium are in 3.01 x 1022 atoms of calcium?
The amount, in grams, of calcium that are in 3.01 x [tex]10^{22[/tex] atoms of calcium would be 1.9992 grams.
Avogadro's numberAccording to the rules, 1 mole of any substance contains Avogadro's number, which is 6.022 x [tex]10^{23[/tex] atoms or molecules.
Now, we have a substance with 3.01 x [tex]10^{22[/tex] atoms of calcium.
If, 1 mole = 6.022 x [tex]10^{23[/tex] atoms
Then, 3.01 x [tex]10^{22[/tex] atoms = 3.01 x [tex]10^{22[/tex]/ 6.022 x [tex]10^{23[/tex]
= 3.01/60.22
= 0.04998 moles
Recall that:
Mole = mass/molar mass
The molar mass of the calcium atom is 40 g/mol.
Thus, the mass of 0.04998 mole of calcium = mole x molar mass
= 0.04998 x 40
= 1.9992 grams
In other words, 3.01 x [tex]10^{22[/tex] atoms of calcium would weigh 1.9992 grams of ca.
More on Avogadro's number can be found here: https://brainly.com/question/11907018
#SPJ1
Identify the type of reaction for each chemical equation. *
5 points
1. Zn + 2HCI → ZnCl₂ + H₂
2.CH4 + 20₂ → CO₂ + 2H₂O
3. Na₂S + 2HCI →→2NaCl + H₂S
4. H₂CO3 → H₂O + CO₂
5. H₂ + O₂ → H₂O
Composition, decomposition replacement combustion
The type of reaction for each chemical equation is as follows:
1. Displacement reaction
2. Combustion reaction
3. Double displacement reaction
4. Decomposition reaction
5. Synthesis reaction.
Types of reactionsThe different types of chemical reactions include:
Displacement reaction: where an atom displaces another atom from a compound. For example, A + BC ---> AB + C. A displaced C from AB.Combustion reaction: a reaction in which a compound burns in oxygen. Double displacement reaction: a reaction in which two reactants exchange radicals to form two new products entirely. For example, AB + CD ---> AC + BDDecomposition reaction: a reaction in which a compound decomposes to produce two or more substances or compounds. For example, AB ---> A + BSynthesis reaction: a reaction that is the opposite of a decomposition reaction. Here, two atoms or substances combine to form a single compound or substance. For example, A + B ---> ABThus, the chemical equations and their respective reactions are as follows:
[tex]Zn + 2HCI -- > ZnCl_2 + H_2[/tex] - Single displacement reaction[tex]CH_4 + 2O_2 --- > CO_2 + 2H_2O[/tex] - combustion reaction[tex]Na_2S + 2HCI -- > 2NaCl + H_2S[/tex] - double displacement reaction[tex]H_2CO_3 -- > H_2O + CO_2[/tex] - decomposition reaction[tex]H_2 + O_2 -- > H_2O[/tex] - synthesis reactionMore on types of reactions can be found here: https://brainly.com/question/14203092
#SPJ1
As you move down a group the electronegativity of an element will
Which statement best describes a concern with using fossil fuels? Responses A greater supply of fossil fuels is needed to have a positive impact on the environment. A greater supply of fossil fuels is needed to have a positive impact on the environment. Burning fossil fuels has a negative impact on the environment. Burning fossil fuels has a negative impact on the environment. The demand for fossil fuels is diminishing. The demand for fossil fuels is diminishing. Burning fossil fuels decreases the amount of greenhouse gases in the atmosphere. Burning fossil fuels decreases the amount of greenhouse gases in the atmosphere.
The statement that best describes a concern with using fossil fuels is that burning fossil fuels has a negative impact on the environment (option B).
What are fossil fuels?Fossil fuels are fuels derived from hydrocarbon deposits such as coal, petroleum, natural gas and, to some extent, peat. These fuels are non-renewable, and their burning generates the greenhouse gas carbon dioxide.
When fossil fuels are burned, they release large amounts of carbon dioxide, a greenhouse gas, into the air. Greenhouse gases trap heat in our atmosphere, thereby, causing global warming.
This suggests that the burning of fossil fuels yields a negative impact of the environment because it causes a negative effect called global warming.
Learn more about fossil fuels at: https://brainly.com/question/2029072
#SPJ1
Plants that make edible fruits take advantage of which 2 benefits of this method of seed dispersal?
A. bees only pollinate flowers that will turn into edible fruits
B. seeds are often deposited in a pile of fertilizer
C. animals destroy the seeds
D. seeds are carried away from the parent plant
PLEASE HELP
What is TRUE about luminol?
A.
It will turn pink in the presence of blood.
B.
It must be diluted with water to work.
C.
It cannot be used on blood that has been diluted.
D.
It doesn’t affect the DNA of a substance.
The true about the luminol is it does not affect the DNA of the substance.
Luminol is a type of chemical which does not affect the DNA of the substance. luminol is used in forensic test by the forensic scientist. luminol solution will react with blood and produce the light. luminol chemical is sensitive to blood. in forensic test luminol is used to detect the amount of blood at the crime scene. it will react with the iron in the hemoglobin. luminol is insoluble in water.
Thus, The true about the luminol is it does not affect the DNA of the substance.
To learn more about luminol here
https://brainly.com/question/5325775
#SPJ1
What is the shielding constant of phosphorus?
Answer: shielding constant is +20.494 ppm for σ(P) and À0. 221 ppm for σ(H).
What would be the molarity of a solution made by dissolving 4.1 grams of NaCl (molecular mass: 58.44 g/mole) in water to a total volume of 0.4 liters
Taking into account the definition of molarity, the molarity of a solution made by dissolving 4.1 grams of NaCl in water to a total volume of 0.4 liters is 0.175 moles/L.
Definition of molarityMolar concentration or molarity is a measure of the concentration that indicates the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:
molarity= number of moles÷ volume
Molarity is expressed in units moles/L.
This caseIn this case, you know:
Mass of NaCl= 4.1 gMolar mass of NaCl= 58.44 g/moleMoles of NaCl= Mass of NaCl÷ Molar mass of NaCl= 4.1 g÷ 58.44 g/mole= 0.07016 molesVolume= 0.4 LReplacing in the definition of molarity:
molarity= 0.07016 moles÷ 0.4 L
Solving:
molarity= 0.175 moles/ L
Finally, the molarity of the solution is 0.175 moles/L.
Learn more about molarity:
brainly.com/question/9324116
brainly.com/question/10608366
brainly.com/question/7429224
#SPJ1
Summarize the physical and chemical properties of zinc
Part 1: Name the type of chemical reaction that occurs when magnesium chloride solution (MgCl2) reacts with sodium carbonate solution (Na2CO3).
Part 2: Explain why aluminum (Al) would react with copper chloride (CuCl2) but not with magnesium chloride (MgCl2).
a) The reaction between magnesium chloride solution and sodium carbonate solution is a displacement reaction
b) Aluminum is above copper but below magnesium in the electrochemical series.
What is a displacement reaction?We know that a displacement reaction is the kind of reaction that occurs between two substances which involves an exchange of radicals. Now we know that a reaction would certainly produce a new kind of chemical substances.
A displacement reaction would occur if the substances that are involved in the reaction are far apart in the activity series. The metal that is more reaction would displace the metal that is less reactive from its salt.
Given the fact that sodium is higher than magnesium in the electrochemical series, then magnesium can be displaced from its solution by sodium
In part 2, the aluminum metal is ahead of copper in the electrochemical series hence aluminum is able to displaces copper from its solution but it is unable to displace magnesium from its solution because magnesium is above aluminum in the electrochemical series.
Learn more about electrochemical series:https://brainly.com/question/14652325
#SPJ1
1. The reaction between magnesium chloride solution and sodium carbonate solution is a displacement reaction
2. Aluminum is above copper but below magnesium in the electrochemical series.
Identify the following element based on its orbital filling diagram:
Answer:
Nickel
Explanation:
count the number of electrons in the 4p and 4d, total 8. After calcium count to 8 spots and you reach nickel. You must fill p orbital before d ortibal for stability.
What is the maximum number of electrons that the 3d sublevel can hold?
As the dry bulb temperature increases with a constant temperature difference, what happens to the relative humidity?
pls help
As the dry bulb temperature increases with a constant temperature difference, the relative humidity increases.
The independent variable is the temperature of the dried bulb. The position of the sun in the sky or any other heat source that is accessible will determine it. The temperature of the dry bulb, along with the volume of water present in the air, together determine the relative humidity.The usual temperature is DBT, or the dry bulb temperature. WBT is the temperature at which an amount of air is isentropically (at constant entropy) and isobarically (at constant dry air pressure) pushed to absorb moisture. As a result of these conditions, the resultant process is isenthalpic (at constant energy - No heat exchange with the surroundings). The water that is in contact with the air during this process must evaporate in order to absorb the moisture. The latent heat of vapourization is required for evaporation.To learn more about evaporation visit:
brainly.com/question/5019199
#SPJ9
Can you please help to learn more about chemical bonding cause I’m having a hard time learning it.
Answer:
Chemical bonding is the process by which atoms are held together to form molecules. The bond between atoms is created by the sharing of electrons. The electrons are attracted to the nucleus of the atoms, which creates a force that holds the atoms together.
If 96.3 g of A1203 decomposed, determine the percent yield of 02 if you
isolated 43.2 g 02.
2Al₂O3 →4A1+30₂
Your answer
25 points
2
I need answer asap
If actual yield and theoretical yield are same then the percent yield will be 100%. Generally, the actual yield is lower than the theoretical yield. The percent yield of 0₂ is 93%.
What is percent yield?Percent yield is the percent ratio of actual yield to the theoretical yield.
Mathematically,
Percent yield= actual yield of a product÷ theoretical yield of the product
The balanced reaction is
2Al₂O₃ →4A1+30₂
moles of Al₂O₃=given mass÷ molar mass
=96.3 g ÷100g/mol
=0.96moles
From 2 mole of Al₂O₃, 3 moles of 0₂ is produced
From 0.96moles of Al₂O₃=(3÷2)×0.96moles of 0₂
=1.44moles of 0₂
mass of 0₂=moles of 0₂×Molar mass of moles of 0₂
mass of 0₂=1.44×32
=46.08g
Percent yield= 43.2 g÷46.08g=93%
Therefore the percent yield of 0₂ is 93%.
To know more about percent yield, here:
https://brainly.com/question/11963853
#SPJ1
Predict a product of the following reaction:
Al + CuCl2→
Answer:
CuCl2 + Aluminum = Chemical / Physical change