The centripetal force acting on a 0.30 kg object moving with a tangential velocity of 12 m/s in a 0.80 m radius circle is N. 0 4.5 0 54 380 O None of the above

a. Part (a): The sound intensity level of the two dogs barking together is  90.5 dB.

Part (a): The sound intensity level of the two dogs barking at the same level is not simply the sum of their individual sound intensities. Instead, sound intensity levels are measured on a logarithmic scale, so the combined sound intensity level can be found using the following equation:

β_total = 10 × log10(N × (10^(β/10)))

Where N is the number of dogs barking (in this case, 2) and β is the sound intensity level of one dog (87 dB). Plugging in these values, we get:

β_total = 10 × log10(2 × ([tex]10^{(87/10)}[/tex]

≈ 90.5 dB

Therefore, the sound intensity level of the two dogs barking together is approximately 90.5 dB.

Part (b): Using the same equation as above, we can find the combined sound intensity level when n dogs are barking:

β_total = 10 × log10(n × (10^(β/10))

For example, if there are 5 dogs barking at the same intensity level, we would have:

β_total = 10 × log10(5 × ([tex]10^{87/10}[/tex])

≈ 93.0 dB

Therefore, the sound intensity level when n dogs are barking would be approximately 10 × log10(n) dB higher than the sound intensity level of one dog barking at 87 dB.

Learn more about sound intensity level: https://brainly.com/question/30101270

#SPJ11

the work done by the force F is 23.5 J when the car moves from x=4.0m to x=7.0m.

To calculate the work done by the force F, we need to use the formula:

W = ∫F(x) dx

where F(x) is the x-component of the force at a given position x, and the integral is taken from the initial position to the final position.

1) When the car moves from x=4.0m to x=7.0m, the x-component of the force is constant at F(x) = 4 N. Therefore, the work done is:

W = ∫F(x) dx = ∫4 dx (from x=4.0m to x=7.0m)
W = 4 * (7.0 - 4.0) = 12 J

So the work done by the force F is 12 J.

2) When the car moves from x=0 to x=7.0m, we need to split the integral into two parts: from x=0 to x=2.0m, and from x=2.0m to x=7.0m. The x-component of the force is given by:

F(x) = 2x N (from x=0 to x=2.0m)
F(x) = 4 N (from x=2.0m to x=7.0m)

Therefore, the work done is:

W = ∫F(x) dx = ∫2x dx (from x=0 to x=2.0m) + ∫4 dx (from x=2.0m to x=7.0m)
W = [x^2]_0^2 + 4 * (7.0 - 2.0)
W = 12 + 20 = 32 J

So the work done by the force F is 32 J.

3) When the car moves from x=7.0m to x=2.0m, the x-component of the force is given by:

F(x) = 6 - x N (from x=2.0m to x=7.0m)

Therefore, the work done is:

W = ∫F(x) dx = ∫(6 - x) dx (from x=7.0m to x=2.0m)
W = [6x - (x^2)/2]_7^2
W = (6*2 - 2^2/2) - (6*7 - 7^2/2)
W = 3 + 20.5 = 23.5 J

So the work done by the force F is 23.5 J.
To calculate the work done by force F on the 2.0 kg radio-controlled model car, you need to use the formula:

W = F × d × cosθ

where W is the work done, F is the force, d is the distance moved, and θ is the angle between the force and the distance. In this case, the force is parallel to the x-axis, so cosθ = 1.

1) Work done by force F when the car moves from x=4.0m to x=7.0m:
Since we don't have the values of the forces or a figure to reference, we cannot provide a numerical answer.

2) Work done by force F when the car moves from x=0 to x=7.0m:
Again, without the values of the forces or a figure to reference, we cannot provide a numerical answer.

3) Work done by force F when the car moves from x=7.0m to x=2.0m:
In this case, the car is moving in the opposite direction, so cosθ = -1. However, without the values of the forces or a figure to reference, we cannot provide a numerical answer.

To know more about  work done  click here:

brainly.com/question/13662169

#SPJ11

When the 60 W bulb and the 100 W bulb are connected in series, the total power consumed by the circuit is 160 W.

However, since they are in series, they share the voltage drop across the circuit. This means that the 60 W bulb will have a lower voltage drop than the 100 W bulb, and therefore it will be less bright than the 100 W bulb. So the 100 W bulb will be brighter in this case.

When the 60 W bulb and the 100 W bulb are connected in parallel, they each receive the full voltage of the battery. Since the 100 W bulb has a higher power rating, it will consume more power than the 60 W bulb, and therefore it will be brighter. So the 100 W bulb will be brighter in this case as well.

To learn more about  inductor here

https://brainly.com/question/4425414

#SPJ4

The angular speeds are approximately 15.38 rev/s, 922.31 rpm, and 96.67 rad/s. To find the angular speed of the rotor, we first need to determine the number of revolutions per second.

(a) To do this, we divide the total number of revolutions (50.0) by the time it takes to complete them (3.25 s):

Angular speed in rev/s = 50.0 / 3.25 = 15.38 rev/s

(b) To convert from revolutions per second to revolutions per minute (rpm), we multiply by 60:

Angular speed in rpm = 15.38 x 60 = 923 rpm

(c) To find the angular speed in radians per second (rad/s), we need to convert the revolutions to radians (since radians are a unit of angle measure). One revolution is equal to 2π radians, so:

Angular speed in rad/s = (50.0 x 2π) / 3.25 = 30.63 rad/s

Therefore, the angular speed of the rotor is 15.38 rev/s, 923 rpm, or 30.63 rad/s.

Learn more about angular here:

https://brainly.com/question/30885221

#SPJ11

The physical phenomenon that predominantly contributes to the magnetic field of the earth is c) ion convection in the molten liquid shell that surrounds the earth's solid inner core.

The physical phenomenon that predominantly contributes to the magnetic field of the Earth is the dynamo effect, which is the process by which a rotating, convecting, and electrically conducting fluid(such as molten iron in the Earth's outer core) generates a magnetic field. In the case of the Earth, the motion of the molten iron in the outer core is driven by heat from the Earth's core and the cooling of the outer core at the boundary with the Earth's mantle. The motion of the molten iron creates electric currents, which generate the magnetic field. This magnetic field is responsible for protecting the Earth from harmful solar and cosmic radiation and also plays a crucial role in navigation and the orientation of many living organisms.

To know more about the magnetic field of the earth, click here;

https://brainly.com/question/21475880

#SPJ11

The entropy change (δS⁰sys) for a pure solid melting into a liquid is δS⁰sys > 0. This is because the transition from solid to liquid involves an increase in disorder, and entropy is a measure of the disorder or randomness in a system.

The entropy change for a pure solid melting into a liquid is typically positive (δs⁰sys > 0) because the solid has a more ordered and structured arrangement of molecules compared to the more random and disordered arrangement in the liquid. This increase in disorder and randomness is reflected in the increase in entropy. However, the specific value of the entropy change depends on the properties of the liquid and the conditions of the process. Without more information about the liquid, it is difficult to determine the exact value of the entropy change.

Learn more about entropy change here:

https://brainly.com/question/6364271

#SPJ11

The pump does 672.06 Joules of work per minute to lift 22.0 kg of water through a height of 3.10 m.

The work done by the pump can be calculated using the formula W = mgh, where W is the work done, m is the mass of water lifted per minute (which is 22.0 kg in this case), g is the acceleration due to gravity (which is approximately [tex]9.81 m/s^2[/tex]), and h is the height lifted (which is 3.10 m).
Substituting the values, we get:
W = (22.0 kg/min) x ([tex]9.81 m/s^2[/tex]) x (3.10 m)
W = 672.06 J/min
Therefore, the pump does 672.06 Joules of work per minute to lift 22.0 kg of water through a height of 3.10 m.

Learn more about work done :

https://brainly.com/question/31428590

#SPJ11

The absolute value of the magnification is used because it only tells us whether the image is upright or inverted, not its size. The height of the image is positive because it is upright, meaning that it has the same orientation as the object.

The image of the object will be formed at the same distance as the object itself, but on the opposite side of the lens.

Using the thin lens equation, we get:

[tex]1/di = 1/f - 1/do = 0 - 1/0.255 = -3.92di = -0.255 cm / (-3.92) = 0.065 cm[/tex]

The negative sign of the image distance indicates that the image is inverted, as expected.

The magnification of the image is:

[tex]m = -di/do = -0.065 cm / 2.54 cm = -0.0256[/tex]

[tex]h_i = 0.0256 \times 4.00 mm = 0.1024 mm[/tex]

Orientation refers to the process of introducing and familiarizing new individuals with an organization or a system. The purpose of orientation is to provide new employees or members with an overview of the company's structure, culture, policies, and procedures.

Orientation typically involves a combination of formal presentations, training sessions, and informal meetings to ensure that new members have a clear understanding of the organization's goals and objectives, as well as the expectations placed upon them. It is an essential part of the onboarding process, as it helps new members feel welcomed and supported, and it enables them to integrate into the organization more quickly and effectively.

To learn more about Orientation visit here:

brainly.com/question/12049504

#SPJ4

Complete Question:-

A 4.00-mm-tall object is 25.5 cm from the center of a silvered, spherical, glass Christmas tree ornament, 5.70 cm in diameter. What is the position of its image (measured from the center of the ornament)? Express your answer in centimeters. What is the height of its image? Express your answer in millimeters.

(a) we can see that the image is located 20 cm to the right of the lens, and it is inverted. This means that the image is real, since it is formed by the actual intersection of refracted light rays. b) di = 20 cm This confirms the result we obtained through ray tracing.

To use ray tracing to determine the location of the image, we need to draw a diagram showing the object, lens, and the rays of light. First, draw the principal axis of the lens, which is a straight line passing through the center of the lens perpendicular to the lens surfaces.

Then, draw the object on the left side of the lens, 30 cm away from it. Draw two rays of light from the object: one parallel to the principal axis, and one through the focal point on the right side of the lens.

The parallel ray will pass through the focal point after it refracts through the lens. The second ray will refract through the lens and travel parallel to the principal axis. The point where the two refracted rays intersect on the right side of the lens is the location of the image.

Using this method, we can see that the image is located 20 cm to the right of the lens, and it is inverted. This means that the image is real, since it is formed by the actual intersection of refracted light rays.

(b) We can also confirm our answer using the thin-lens equation: 1/f = 1/di + 1/do where f is the focal length, di is the image distance, and do is the object distance.

Plugging in the values given in the problem, we get: 1/10 = 1/di + 1/30 Solving for di, we get: di = 20 cm This confirms the result we obtained through ray tracing.

Know more about focal point here:

https://brainly.com/question/11259007

#SPJ11

When the circuit gets hotter, it can cause the electrical resistance  of current to increase.

The Joule's law of heating says that the heat energy produced in the conductor is directly proportional to the square of electric current, resistance and the time till which the current is supplied.

                                  H=I2RT

This increase in resistance can lead to a decrease in the current flowing through the circuit. In summary, when the circuit gets hotter, the current tends to decrease due to the increase in electrical resistance.

For more information on effect on current of hotter circuithttps://brainly.com/question/31302019

#SPJ11

The special theory of relativity predicts that fast-moving objects will appear to be shorter along the direction of motion than when they are seen at rest.

This phenomenon is known as length contraction. According to Einstein's theory, the faster an object travels, the more it contracts in the direction of motion. This effect is only noticeable at speeds that are a significant fraction of the speed of light, which is why it is not noticeable in our everyday experiences.

The special theory of relativity is a fundamental theory of physics that explains how the laws of physics apply to objects that are moving at high speeds. One of the most famous predictions of the theory is that the speed of light is constant in all reference frames, regardless of how fast the observer is moving relative to the light source. This prediction has been confirmed by numerous experiments and is now considered one of the pillars of modern physics.

Another consequence of the theory is that time and space are not absolute, but are relative to the observer's frame of reference. This means that different observers will measure different lengths and times for the same event, depending on their relative velocities. In particular, the length of an object appears to be shorter along the direction of motion when it is moving at high speeds. This effect is caused by the time dilation that occurs when an object moves at relativistic speeds.

In summary, the special theory of relativity predicts that fast-moving objects will appear shorter along the direction of motion than when they are seen at rest. This is due to length contraction, which is a consequence of the theory's prediction that time and space are relative to the observer's frame of reference.

To know more about theory of relativity  click on below link :

https://brainly.com/question/28289663

#SPJ11

Option Bis correct that there is initially current, but it decreases with time and eventually stops.

Circuits in series: As there is only one path for the charge to flow, current is the same in every device. The total of each device's unique resistances makes up the circuit's resistance. The total current falls as the number of resistors rises.

Current declines as resistance rises. The voltage stays constant as a result of an equal increase in resistance and decrease in current. All of the resistors in the circuit receive an equal distribution of the voltage.

To know more about current visit:-

https://brainly.com/question/30080562

#SPJ1

You can then use the ratio of the resistance values to determine the turns ratio of the transformer. Keep in mind that this method may not be completely accurate, as there may be other factors affecting the resistance measurements.

To determine the ratio of turns on the two coils of an enclosed transformer without taking it apart, you can use a multimeter to measure the resistance of each wire lead. The two leads with the highest resistance will be connected to the primary coil, while the other two leads with the lower resistance will be connected to the secondary coil.

To determine the turns ratio of an enclosed transformer with four wire leads without taking it apart, follow these steps:
1. Identify the primary and secondary leads: Label the four wire leads as A, B, C, and D. Typically, A and B will be the primary leads, while C and D will be the secondary leads. Check the transformer's documentation to confirm this if available.
2. Measure the primary and secondary voltages: Connect the primary leads (A and B) to an AC voltage source, such as a variac or function generator. Using a voltmeter, measure the AC voltage across the primary leads (V_primary) and across the secondary leads (V_secondary).
3. Calculate the turns ratio: Divide the measured secondary voltage (V_secondary) by the primary voltage (V_primary) to determine the turns ratio of the transformer.
Turns Ratio = V_secondary / V_primary
This method allows you to determine the turns ratio of an enclosed transformer without taking it apart by measuring the voltages across the primary and secondary coils.

Learn more about turns ratio here: brainly.com/question/29511335

#SPJ11

The magnitude of the force per unit length that one wire exerts on the other is 0.945 N/m.

This is calculated using the equation F = μ0I1I2/2πd, where μ0 is the permeability of free space, I¹ and I² are the two currents, and d is the distance between the wires. In this case, μ0 = 4π x 10⁻⁷ N/A², I¹ = 0.530 A, I² = 1.17 A, and d = 1.25 cm.

The magnitude of the magnetic field inside the solenoid is 0.837 T (Tesla). This is calculated using the equation B = μ0NI/L, where μ0 is the permeability of free space, N is the number of turns, I is the current, and L is the length of the solenoid.

In this case, μ0 = 4π x 10⁻⁷ N/A², N = 200 turns, I = 2.00 A, and L = 0.100 m. This magnetic field is generated by the electric current flowing through the solenoid, and it is strongest at the center of the solenoid and gets weaker as one moves away from the center.

Know more about permeability here

https://brainly.com/question/11734873#

#SPJ11

1. How many vehicles are Canadian? 20,391 vehicles are Canadian.

2. How many vehicles are motorcycles? 4,161 vehicles are motorcycles.

3. How many vehicles are Canadian motorcycles? 320 vehicles are Canadian motorcycles.

4. How many vehicles are either Canadian or motorcycles? To find this, add the total number of Canadian vehicles and the total number of motorcycles, then subtract the number of Canadian motorcycles (to avoid double-counting): 20,391 + 4,161 - 320 = 24,232 vehicles are either Canadian or motorcycles.

5. How many automobiles are Mexican? There are 8,607 automobiles that are Mexican .

To learn more about Motor Vehicles in North American Countries : https://brainly.com/question/23072188

#SPJ11

Thus, the estimated energy content in a quart of soda is approximately 669,440 Joules.

It is difficult to provide an exact estimate of the energy contained in a quart of soda without knowing the specific brand and type. However, on average, a quart of soda contains around 1000 calories or 4,184,000 joules of energy.

It is important to note that consuming excessive amounts of soda can lead to negative health consequences, such as weight gain and an increased risk of developing chronic diseases.
To estimate the energy content in a quart of soda, we will first determine the amount of sugar in the soda and then convert that into energy using a standard value for the energy content of sugar.
1. A quart is equivalent to 32 fluid ounces (fl oz).
2. Let's assume the soda has 10 grams (g) of sugar per 8 fl oz serving, a common value for many sodas.
3. Calculate the total amount of sugar in the quart of soda: (32 fl oz / 8 fl oz) * 10 g = 40 g of sugar.
4. The energy content of sugar is about 4 kilocalories (kcal) per gram.
5. Calculate the total energy in kcal: 40 g * 4 kcal/g = 160 kcal.
6. Convert kcal to joules (J): 1 kcal = 4,184 J, so 160 kcal * 4,184 J/kcal ≈ 669,440 J.
Thus, the estimated energy content in a quart of soda is approximately 669,440 Joules.

learn more about energy here

https://brainly.com/question/1932868

#SPJ11

To draw a ray diagram for a convex lens, follow these steps:

Remember, the three main rays are:

The torque on the bar depends on both the magnitude of the force and the distance from the axis of rotation to the point where the force is applied. When the force is perpendicular to the bar, the torque is zero, and when the force is at an angle, the torque is given by T = Fd.

To determine the torque on the bar at the instant shown for each angle, we need to first understand what torque is. Torque is the measure of the ability of a force to cause an object to rotate around an axis or pivot point.

It is given by the equation T = Fd, where F is the force applied and d is the perpendicular distance from the axis of rotation to the point where the force is applied.

For the first angle shown, the force F is perpendicular to the bar, and so the torque is zero since the perpendicular distance is zero. For the second angle, the force F is at an angle of 30 degrees to the horizontal, and so the perpendicular distance is given by d = 1.40*sin(30) = 0.70 m.

Thus, the torque is T = 35.0*0.70 = 24.5 Nm. For the third angle, the force F is at an angle of 60 degrees to the horizontal, and so the perpendicular distance is given by d = 1.40*sin(60) = 1.21 m. Thus, the torque is T = 35.0*1.21 = 42.35 Nm.

To know more about torque refer here:

https://brainly.com/question/25708791#

#SPJ11

1. The parameter we are interested in estimating is the average amount you can drive your car on one tank of gas, which is denoted by the population mean μ.

Population is the total number of people or inhabitants in a given area. It is a key indicator of the size and density of a community or region. Population can be measured by counting the number of people living in a certain area, or by estimating the number of people in a certain area based on data collected from surveys and censuses. Population can also be studied in terms of age, gender, income, education, health, and other characteristics to help understand the social dynamics of an area. Population growth can be a result of more people moving into an area, a higher birth rate, or a lower death rate. Population changes can have a large impact on the environment, infrastructure, and economy of an area.

2. The standard error of the mean for this data is se = 46/√25 = 6.83.
3. The approximate 95% margin of error is 6.83 x 1.96 = 13.4.
4. The approximate 95% CI for μ is 303 ± 13.4 = 289.6 to 316.4.

To learn more about population
https://brainly.com/question/29309160
#SPJ1

Star A has the greatest mass; elements heavier than carbon and oxygen are produced in high-mass red giants; white dwarfs need binary companions to become novae.

Among the three main sequence stars, Star A has the greatest mass, as its shorter lifetime on the main sequence suggests higher mass and faster fuel consumption.

For elements heavier than carbon and oxygen, they are typically produced inside high-mass red giant stars, as they have the necessary temperatures and pressures for nucleosynthesis.

Lastly, for a white dwarf to become a nova, it requires a binary companion.

Material from the companion accumulates on the white dwarf's surface, causing a thermonuclear explosion, resulting in a sudden brightening known as a nova.

For more such questions on oxygen, click on:

https://brainly.com/question/13598227

#SPJ11

To create a 0.25 microfarad (µF) capacitor, We have 8 steps in the insulating material covers the entire surface of the plates.

1. Gather materials: You will need two conductive plates (e.g., aluminum foil), an insulating material (dielectric) such as plastic or paper, and connecting wires.
2. Cut the plates: Cut two pieces of aluminum foil to the same size. The surface area and distance between the plates will determine the capacitance value, so you may need to adjust the size according to the desired capacitance.
3. Prepare the dielectric: Cut a piece of insulating material to the same size as the aluminum foil plates. This material will separate the plates and prevent direct electrical contact.
4. Assemble the capacitor: Place the dielectric material between the two aluminum foil plates, ensuring they don't touch each other. Make sure the insulating material covers the entire surface of the plates.
5. Connect the wires: Attach a connecting wire to each aluminum foil plate. You can use conductive adhesive, soldering, or any other reliable method to establish a good electrical connection.
6. Roll or stack the layers: To save space, you can either roll the layers together (with the dielectric in the middle) or stack them on top of each other. Be cautious not to damage the layers or cause any short circuits.
7. Measure the capacitance: Use a capacitance meter to measure the resulting capacitance of your homemade capacitor. Adjust the surface area of the plates or the distance between them if needed to achieve the desired 0.25 µF capacitance value.
8. Encapsulate the capacitor: For protection and insulation, you can wrap the assembled capacitor in electrical tape or enclose it in a plastic case.
Once these steps are complete, you will have successfully created a 0.25 microfarad capacitor.

Learn more about Capacitance here

https://brainly.com/question/28445252

#SPJ11

The amount of energy consumed in the form of work by the ideal Carnot refrigerator to freeze 2 kg of water at 0°C is approximately 6.05 x 10[tex]^4 J.[/tex] So the answer is A) 6.1 x 10[tex]^4 J.[/tex] (rounded to two significant figures).

The Carnot cycle consists of two isothermal and two adiabatic processes. For a refrigerator, the heat is transferred from a low-temperature reservoir (the freezer) to a high-temperature reservoir (the room), and work must be done on the system to accomplish this. The Carnot cycle tells us that the work done by the refrigerator is:

[tex]W = Q_L (1 - T_H/T_L)[/tex]

where Q_L is the amount of heat transferred from the low-temperature reservoir, T_H is the temperature of the high-temperature reservoir (the room, in this case), and T_L is the temperature of the low-temperature reservoir (the freezer). We can solve for Q_L and then use the heat of transformation for water to find the work done to freeze 2 kg of water.

The temperature of the freezer is 0°C = 273 K. The temperature of the room is 25°C = 298 K. Therefore, we have:

Q_L = W/(1 - T_H/T_L)

= W/(1 - 298 K/273 K)

= W/0.0908

We know that the heat of transformation for water is 333 kJ/kg, so the heat required to freeze 2 kg of water is:

Q_L = (2 kg) * (333 kJ/kg)

= 666 kJ

Substituting this into the equation above, we get:

666 kJ = W/0.0908

Solving for W, we get:

W = 666 kJ * 0.0908

= 60.5 kJ

= 6.05 x 10[tex]^4 J[/tex]

To know more about current here

https://brainly.com/question/1100341

#SPJ4

Answer:

Questions occur until only one true or yes answer.

Explanation:

A decision tree is a visual representation of a decision-making process that involves a series of questions or decisions that lead to a final outcome or decision. Each question or decision in the tree has two or more possible answers, and each answer leads to a different branch or path in the tree. The questions are designed to be answered with either a true or yes answer, which eventually leads to the final decision or outcome. Therefore, the correct option is 4.

The initial length of the aluminum rod was 40 cm.

To find the initial length, we'll use the formula for linear thermal expansion: ΔL = L₀ × α × ΔT, where ΔL is the change in length, L₀ is the initial length, α is the coefficient of linear expansion for aluminum, and ΔT is the temperature change.

First, we need the coefficient of linear expansion for aluminum, which is 24 × 10⁻⁶/°C. The given values are ΔL = 0.0032 cm and ΔT = 120 °C.

1. Rearrange the formula to find L₀: L₀ = ΔL / (α × ΔT)
2. Substitute the given values: L₀ = 0.0032 cm / (24 × 10⁻⁶/°C × 120 °C)
3. Perform the calculation: L₀ = 40 cm

So, the initial length of the aluminum rod was 40 cm.

To know more about thermal expansion click on below link:

https://brainly.com/question/30242448#

#SPJ11

If the force is not exerted along the line of motion but is in some other direction, the force sensor will not measure the same force.

In fact, the force sensor will measure a larger force since the force is no longer parallel to the surface of the ramp.

The force sensor only measures the force in the y-direction, so if the force is not parallel to the surface of the ramp, there will be a component of the force that is perpendicular to the ramp.

This perpendicular component of the force will add to the force measured by the force sensor, resulting in a larger force reading.

However, since the IO Lab is still moving at a constant velocity, the force must be balanced by an equal and opposite force, which means that there must be a component of the force that is parallel to the surface of the ramp.

Therefore, the force exerted on the IO Lab will have both a perpendicular and parallel component, and the force sensor will measure the force in the y-direction, which will be a larger force than before.

To know more bout force sensor visit link :

https://brainly.com/question/28906632

#SPJ11

Yes I agree.

The socio historical concept implies that race is created and maintained through systems of power and inequality.

According to Michael Omi and Howard Winant, in Racial Formations, race is a socio-historical concept that is constructed through the intersection of cultural, political, and economic forces.

In this book, they argue that race is not an immutable, biologically determined characteristic of individuals or groups but rather a social construct that is created and maintained through systems of power and inequality. The authors illustrate how race is constructed through examples from different historical periods and social contexts.

Learn more about race here: https://brainly.com/question/28138343

#SPJ1

Answer:

Just use the formulas

Force = kq1q2/r^2

Field = kq/r^2

V = ir

p = I^2r

p = vi

p = v^2/r

q = i*T

where K is the permittivity of free space

The velocity of the object after three seconds is 15 m/s.

To find the velocity of an object after three seconds given the position function 2t²+ 3t + 4 (in meters), we will first find the velocity function by taking the derivative of the position function with respect to time, and then evaluate the velocity function at t = 3 seconds.
1. Find the derivative of the position function:
Position function: P(t) = 2t² + 3t + 4
Derivative (velocity function): V(t) = dP(t)/dt = 4t + 3
2. Evaluate the velocity function at t = 3 seconds:
V(3) = 4(3) + 3 = 12 + 3 = 15 m/s
So, the velocity of the object after three seconds is 15 m/s.

To learn more about velocity https://brainly.com/question/80295?source=archive

#SPJ11

In the negative y-direction, the magnetic force acting on the particle is -7.2 10⁻¹⁵ N.

The Lorentz force is experienced by a charged particle moving at speed v through a magnetic field B and an electric field E. The Lorentz force is the name given to the whole electromagnetic force F acting on the charged particle. F is the perpendicular to the plane that contains both v and B.

F = qv x B

In this case, we have:

q = 1.0 × 10⁻¹⁹ C

v = 6.0 × 10⁴ m/s i

We can plug these values into the formula and calculate the cross product:

F = qv x B = (1.0 × 10⁻¹⁹ C)(6.0 × 10⁴ m/s i) x (0.4 i + 1.2 k) T

F = (6.0 × 10⁻¹⁵ i) x (0.4 i + 1.2 k) T

F = (2.4 × 10⁻¹⁵ i² + 7.2 × 10⁻¹⁵ i k) N

Note that i x i = 0 and i x k = -k x i = -j. Therefore, the magnetic force can be simplified to:

F = -7.2 × 10⁻¹⁵ j N

To know more about magnetic force visit:-

https://brainly.com/question/3160109

#SPJ1