The car was initally traveling at 25 m/s. The car slows with a negative acceleration as shown. How long does it take the car to slow to a final velocity of 2.0 m/s?

Answers

Answer 1

Answer:

t = 2.35s

Explanation:

Using one of the equation of motion expressed as v = u+at where;

v is the final velocity = 2.0m/s

u is the initial velocity = 25m/s

a is the acceleration = -a (since the acceleration is negative)

t is the time taken

Substituting the given parameters into the formula above;

2.0 = 25-9.81t

subtract 25 from both sides

2.0 - 25 = 25-9.81t - 25

-23 = -9.81t

Divide both sides by -9.81

-23/-9.81 = -9.81t/-9.81

t = 23.0/9.81

t = 2.35s

Hence it took the car 2.35s to slow to a final velocity of 2.0 m/s


Related Questions

the unit for the measure of distance is

Answers

Answer: Well their are many Miles, inches, kilometres, meters, cementers, and so on.

hope it helps you bye

Centimetre, Meter, & Kilometre


Determine the mass of the object below to the correct degree of precision.

272.83 g

272.9 g

272.90 g

272.94 g

Answers

Answer : The correct degree of precision is 272.94 g.

Explanation :

Precision : It is defined as the closeness of two or more measurements to each other.

For Example: If you weigh a given substance five times and you get 2.7 kg each time. Then the measurement is said to be precise.

Level of precision is determined by the maximum number of decimal places.

In the given figure, the value of mass of object is 280 g. From the given options we conclude that the 272.94 g is more close to 280 g and has maximum number of decimal places. So, 272.94 g measurement is said to be precise.

Therefore, the correct degree of precision is 272.94 g.

A dog runs 300m North and sees the dog catcher and runs 120 m south .Whats the dogs displacement.The same jogger runs 3 miles around the track, starting and finishing in the same time after completing exactly 12 laps. What is the average velocity now

Answers

Answer:

1. 180 m

2. 1.5 miles/hour

3. 0 m/s

Explanation:

The complete question is

A dog runs 300 m North and sees the dog catcher and runs 120 m south Whats the dogs displacement.

A jogger runs north for 3.0 miles. If this took 2.0 hours, what is the jogger’s average velocity in miles per hour?

The same jogger runs 3.0 miles on the track, starting and finishing his run after completing exactly 12 laps around the track. What is his average velocity?

1. Displacement is how far the dog moves from the original starting point.

If the dog runs 300 m north, and then 120 m south, then the displacement from the starting point will be

displacement = 300 - 120 = 180 m

2. Displacement of the jogger = 3 miles

Time taken by the jogger = 2 hours

velocity of the jogger = ?

Velocity is = displacement/time

velocity = 3/2 = 1.5 miles/hour

3. velocity = displacement/time

if the jogger completes exactly 12 laps around the track, then the jogger will return to the starting point. This means that the jogger's displacement from the starting point is 0 miles

Jogger's velocity will therefore be = 0 m/s

What is 1.2 kg converted into mg.
I need to know for step by step please?

Answers

Here’s a good photo to reference when converting in the metric system.

Each time you move down a step you move the decimal to the right, each time you move up a step you move the decimal to the left.

We are going from 1.2 kg or kilograms, which is at the very top left of the ladder. To get to mg or milligrams, we would have to make six jumps, so we’d move the decimal over six times.

1.2 > 12. > 120. > 1200. > 12000. > 120000. > 1200000.

So our final answer would be 1,200,000mg.
AnSweR :-

=> 1200 000 mg

ExPlaNatIoN :

We know that,

1 kg = 1000 g

1 g = 1000 gm

then,

1.2kg = 1.2 × 1000 g = 1200 g

1200 g = 1200 × 1000 mg

=> 1200 000 mg

Two point charges are separated by a certain distance. How does the strength of the electric field produced by the first charge, at the position of the second charge, change if the second charge is doubled?

Answers

Answer:

The field will remain the same

Explanation:

This is because electric field given as

E1= kq1/r²

And that of second charge

E² = kq2/r²

Is not affected by the size of the second charge q2

Select the correct equations that show that a freely falling rock drops a distance of 80 m when it falls from rest for 4 s .

Answers

Answer:

1 and 4

Explanation:

A runner changing speed from 3 meters per second to 5 meters per second is an example of

Answers

Answer: acceleration

Explanation:

he is accelarting from 3 meters per second to 5 meters per second

Answer:

acceleration

Explanation:

A hollow plastic sphere is held below the surface of a fresh-water lake by a cord anchored to the bottom of the lake. The sphere has a volume of 0.650 cubic meters and the tension in the cord is 900 N. a) Calculate the buoyant force exerted by the water on the sphere. b) what is the mass of the sphere? c) the cord breaks and the sphere rises to the surface. When the sphere comes to rest, what fraction of its volume will be submerged?

Answers

Answer: a) B = 6811N

              b) m = 603.2kg

              c) 86.8%

Explanation: Buoyant force is a force a fluid exerts on a submerged object.

It can be calculated as:

[tex]B=\rho_{fluid}.V_{obj}.g[/tex]

where:

[tex]\rho_{fluid}[/tex] is density of the fluid the object is in;

[tex]V_{obj}[/tex] is volume of the object;

g is acceleration due to gravity, is constant and equals 9.8m/s²

a) For the hollow plastic sphere, density of water is 1000kg/m³:

[tex]B=10^{3}.0.695.9.8[/tex]

B = 6811N

b) Anchored to the bottom, the forces acting on the sphere are Buoyant, Tension and Force due to gravity:

B = T + [tex]F_{g}[/tex]

B = T + mg

mg = B - T

[tex]m=\frac{B - T}{g}[/tex]

Calculating:

[tex]m=\frac{6811 - 900}{9.8}[/tex]

m = 603.2kg

c) When the shpere comes to rest on the surface of the water, there are only buoyant and gravity acting on it:

B = m.g

[tex]\rho_{w}.V_{sub}.g=m.g[/tex]

[tex]V_{sub}=\frac{m}{\rho_{w}}[/tex]

[tex]V_{sub}=\frac{603.2}{1000}[/tex]

[tex]V_{sub}[/tex] = 0.6032m³

Fraction of the submerged volume is:

[tex]\frac{V_{sub}}{V_{obj}}[/tex] = [tex]\frac{0.6932}{0.695}[/tex] = 0.868

In a walking investigation, Josephine

walked a total distance of 40 feet. At the

halfway point, she had walked for 25

seconds. She stopped for 5 seconds to tie

her shoe and then continued for 25 more

seconds. Sketch a graph that shows

Josephine's distance from the starting point

over time

Answers

Explanation:

She walked 20 feet in the first 25 seconds.  Then she stayed at the 20 foot position for 5 seconds.  Then she walked another 20 feet in 25 seconds.  See attached graph.

A car slows down uniformly from a speed of 22 m/s to rest in 4.0 seconds. How far did it travel in that time

Answers

Answer:

[tex] \boxed{\sf Distance \ travelled = 44 \ m} [/tex]

Given:

Initial speed (u) = 22 m/s

Final speed (v) = 0 m/s (Rest)

Time taken (t) = 4 seconds

To Find:

Distance travelled by car (s)

Explanation:

From equation of motion of object moving with uniform acceleration in straight line we have:

[tex] \boxed{ \bold{s = (\frac{v + u}{2} )t}}[/tex]

By substituting value of v, u & t in the equation we get:

[tex] \sf \implies s = ( \frac{0 + 22}{2} ) \times 4 \\ \\ \sf \implies s = \frac{22}{2} \times 4 \\ \\ \sf \implies s = 11 \times 4 \\ \\ \sf \implies s = 44 \: m[/tex]

[tex] \therefore[/tex]

Distance travelled by car (s) = 44 m

Within the nebula that was the start of our solar system, a shock wave from an exploding supernova triggered dust particles to be drawn together to form a dense spherical cloud. The accumulation of dust set off a chain reaction. As the core of the cloud attracted more dust, its gravitational pull increased. As this pull increased so did all BUT its

Answers

Answer:

B expansion  

Explanation:

In a cloud of gas and dust known as the solar nebula, the Sun and the planets jointly created 4.6 billion years ago. The solar nebula presumably collapsed as a result of a shock wave from a nearby supernova explosion. Thus, option A is correct.

What nebula that was the start of our solar system?

A nearby supernova explosion's shock wave is most likely what caused the solar nebula to collapse.The planets formed in a thin disk around the Sun, which formed in the centre of the solar system. Moons began to form similarly around the gas giant planets.

Every speck of stuff in the solar system was once a massive nebula, or floating interstellar cloud, before it was shaped into a tidy collection of planets.

Therefore, a shock wave from an exploding supernova triggered dust particles to be drawn together to form a dense spherical cloud.

Learn more about nebula here:

https://brainly.com/question/9497068

#SPJ2

Q1: A runner is jogging in a straight line at a steady vr= 6.8 km/hr. When the runner is L= 2.4 km from the finish line, a bird begins flying straight from the runner to the finish line at vb= 13.6 km/hr (2 times as fast as the runner). When the bird reaches the finish line, it turns around and flies directly back to the runner. What cumulative distance does the bird travel? Even though the bird is a dodo, assume that it occupies only one point in space (a “zero” length bird), travels in a straight line, and that it can turn without loss of speed. Answer in units of km. Q2: After this first encounter, the bird then turns around and flies from the runner back to the finish line, turns around again and flies back to the runner. The bird repeats the back and forth trips until the runner reaches the finish line. How far does the bird travel from the beginning (including the distance traveled to the first encounter)? Answer in units of km.

Answers

Answer:

Q1: 3.2km

Q2: 4.8K

Explanation:

Q1:

So db is the distance of bird, and dr is the distance of runner

db = 2vr  and the distance of bird is going to be 2 times greater than the runner.

formulas: db = 2vr & db = 2dr

db = 2drL + (L - x) = 2x2L - x = 2x2L = 3xx = [tex]\frac{2}{3}[/tex]L

Insert it in x = [tex]\frac{2}{3}[/tex]L

[tex]\frac{2}{3}[/tex](2.4km) = 1.6km

Now we use formula db = 2dr

db = 2L - xdb = 2(2.4km) - 1.6kmdb = 3.2km

Q2:

Formulas: Vr = L /Δt & Vb = db/Δt

Vr = L/ Δt ⇒ Δt = [tex]\frac{L}{Vr}[/tex][tex]\frac{2.4km}{6.8km/hr}[/tex][tex]\frac{6}{17}hr[/tex]

(Km cancel each other)

Vb = db/Δt ⇒ db = VbΔt13.6km/hr[tex](\frac{6}{17}hr )[/tex]4.8km

(hr cancel each other)

Hope it helps you :)

3. Which statement best describes the research projects that are funded by private

foundations?

a. Research projects that have little chance of success

b. Research projects for a specific cause

c. Research projects concerning the environment

d. Research projects that benefit consumers

Answers

Answer:

b. Research projects for a specific cause

Explanation:

Research funded by private foundations are usually for a specific cause. These type of research are usually properly scrutinized, and must have a high probability of success. Most of these projects may not be to benefit the consumers, but are usually done with a special purpose in mind.

A scientific LAW has been proven and a THEORY has not. True Or False​

Answers

Answer:

true

Explanation:

i did the test its right

Answer:

true

mark mine as brainiest, i could use the points

Two trains traveling towards one another on a straight track are 300m apart when the engineers on both trains become aware of the impending Collision and hit their brakes. The eastbound train, initially moving at 97.0 km/h Slows down at 3.50ms^2. The westbound train, initially moving at 127 km/h slows down at 4.20 m/s^2. What is the distance between them once they stop (express your answer to the two significant figures)

Answers

Answer:

48 m

Explanation:

Two trains traveling towards one another on a straight track are 300m apart when the engineers on both trains become aware of the impending Collision and hit their brakes. The eastbound train, initially moving at 97.0 km/h Slows down at 3.50ms^2. The westbound train, initially moving at 127 km/h slows down at 4.20 m/s^2.

The eastbound train

First convert km/h to m/s

(97 × 1000)/3600

97000/3600

26.944444 m/s

As the train is decelerating, final velocity V = 0 and acceleration a will be negative. Using third equation of motion

V^2 = U^2 - 2as

O = 26.944^2 - 2 × 3.5 S

726 = 7S

S = 726/7

S1 = 103.7 m

The westbound train

Convert km/h to m/s

(127×1000)/3600

127000/3600

35.2778 m/s

Using third equation of motion

V^2 = U^2 - 2as

0 = 35.2778^2 - 2 × 4.2 × S

1244.52 = 8.4S

S = 1244.52/8.4

S2 = 148.2 m

S1 + S2 = 103.7 + 148.2 = 251.86

The distance between them once they stop will be

300 - 251.86 = 48.14 m

Therefore, the distance between them once they stop is 48 metres approximately.

I NEED THIS IN AN HOUR! PLEASE PLEASE PLEASE HELP Tim and Jim measured the length of the same piece of board. Using a certain ruler, Tim obtained a length of 0.96 centimeter. Using a different ruler, Jim obtained a length of 0.9662 centimeter. Which measurement is better? Explain the reason for your answer.

Answers

Answer:

Jims is better

Explanation:

His number is more complex which means it is more accurate

Which of the following is true of the structures labeled A in the cell membrane?
Choose 1 answer:

(Choice A) A They are membrane proteins.

(Choice B) B They are entirely hydrophobic.

(Choice C) C They are phospholipids.

(Choice D) D They are carbohydrates. Report a problem

Answers

Answer:

they are membrane proteins

Answer: A
They are membrane proteins
Explanation:

Why is there no ideal time of day when all students should study?

Answers

Answer:because each individual works best at a different time of day. D. because scheduling prevents everyone from studying at a set time. emilleexo818 is waiting for your help.

Explanation:

Answer:

The correct and overall question would be: Because each individual works best at a different time of day

Explanation:

(I'm smart and I took the quiz, I hope this helped guys! :)

1. An arrow is shot with an initial velocity of 60.0 m/s at an angle of 30.0° above the horizontal. What is the maximum height it will reach?


a. 23 m

b. 46 m

c. 69 m

d. 92 m


2. A projectile is launched horizontally from a cliff with an initial speed of 40 m/s. The cliff is 125 m high and the projectile travels a horizontal distance of 200 m from the bottom of the cliff. What is the speed of the projectile right before it hits the ground?


a. 48 m/s


b. 52 m/s


c. 56 m/s


d. 60 m/s


e. 64 m/s

Answers

Answer:

46m

Explanation:

Given the following :

Initial Velocity (u) = 60

Angle(θ) = 30°

Maximum height it will reach?

The maximum height if a projection is calculated using the formula :

H = u²sin²θ / 2g

Where H = maximum height, g = acceleration due to gravity = 9.8m/s²

H = (60²sin × 0. 5²) / 2(9.8)

H = 900 / 19.6

H = 45.918m

H = 46m


Determine the acceleration (in m/s) of an object which

A. changes its velocity from 12.1 m/s to 23.5 m/s in 7.81 seconds

B. accelerates from 33.4 m/s to 18.9 m/s over a distance of 109 m

C. accelerates from 21.5 m/s to 8.9 m/s over a distance of 109 m

Please help!

Answers

Explanation:

A=23.5-12.1/7.81

1.46

b)(18.9^2-(33.4)^2)/2(109)

-3.5

c)8.9^2-(21.5)^2/2(109)

-1.76

A body is projected vertically upwards with a velocity of 10m/s from a vertically upward position at height h another body is dropped down at the same instant

Answers

Answer:

0.25 second  

Explanation:

Given :

Velocity, v = 10 m/s

The height,

[tex]$ h = \frac{v^2}{2g} $[/tex]

[tex]$ h = \frac{10^2}{2\times 9.8} $[/tex]

   = 5 m

Therefore the time at which both the bodies meet is

[tex]$ t = \frac{h}{v+v} $[/tex]

[tex]$ t = \frac{5}{10+10} $[/tex]

[tex]$ t = \frac{5}{20} = 0.25$[/tex]

So, time taken is 0.25 seconds

A carpenter apprentice was killed when he was struck in the head by a nail that was fired from a powder actuated tool. The tool operator, while attempting to anchor a plywood form in preparation for pouring a concrete wall, fired the gun, causing the nail to pass through the hollow wall. The nail traveled some twenty-seven feet before striking the victim. The tool operator had never received training in the proper use of the tool, and none of the employees in the area were wearing personal protective equipment. What should be recommended to prevent this accident from happening again?

Answers

Answer:

Explanation:

The recommendations that need to be urgently addressed by the workshop and it's employees are

1) Training of all employees (particularly the tool operators) on the safe and proper use of all tools used in the course of the carpentry work.

2) Training of all employees in health, safety and environment (HSE). This training will help them appreciate the importance of always wearing personal protective equipment (PPE) when at the workshop or during the course of a work (because if the apprentice was putting on an engineer's helmet, he could have been safe).

3) Employees who fail to adhere strictly to the use of PPE should be sanctioned or even dismissed from the workplace

New theories usually don’t start “from scratch.” For example, the modern model of the atom is the result of new information added to the cloud model. What is the main difference between the cloud model of the atom and the modern model? Group of answer choices Only the modern model includes protons. The cloud model does not include neutrons. Electrons move in specific orbits in the modern model. Electrons exist in a cloud around the nucleus in the cloud model.

Answers

Answer:

Electrons move in specific orbits in the modern model.

Explanation:

I'm still learning so, and D is not the answer.

The main difference between the cloud model of the atom and the modern model is that electrons exist in a cloud around the nucleus in the cloud model.

New theories usually don’t start “from scratch.” For example, the modern model of the atom is the result of new information added to the cloud model.

What is the main difference between the cloud model of the atom and the modern model?

Only the modern model includes protons. NO. Protons were discovered by Rutherford and are part of both models.The cloud model does not include neutrons. NO. Neutrons, discovered by Chadwick, are part of both models.Electrons move in specific orbits in the modern model. NO. Electrons in the modern model move in diffuse areas known as orbitals.Electrons exist in a cloud around the nucleus in the cloud model. YES.

The main difference between the cloud model of the atom and the modern model is that electrons exist in a cloud around the nucleus in the cloud model.

You can learn more about atomic models here: https://brainly.com/question/1596638

What is the strength of electric field EpEp 0.60 mmmm from a proton? Express your answer to two significant figures and include the appropriate units.

Answers

Answer:

3.99*10^-3N/C

Explanation:

Using

Ep= kq/r²

Where r = 0.6mm = 0.6*10^-3m

K= 8.9*10^9 and q= 1.6*10^-19

So = 8.9*10^9 * 1.6*10^-19/0.6*10^-3)²

= 3.99*10^-3N/C

What is the acceleration of softball if it has a mass of 5 kg and hits the catchers glove with a force of 35 N

Answers

Answer:

50m/s2^

Explanation:

We know , by newton's law of motion .

F=ma

a=f/m

a=25/0.5

a=50m/s2^

Therefore , the acceleration of a softball is  .

Answer:

7 m/s²

Explanation: Force = Mass x acceleration  

Also note that 1 N = 1 kg.m/s²

a=F/ m

a= 35 N/ 5 kg = 35 kg.m/ s²  ÷  kg                 Aside:( so you cross out the kg)

a= 7 m/s²

How does online gaming affect the health of the student

Answers

Answer:

because we more see th online gaming and not eat food and playing that game all the time so it effect the health

hope you like it please follow me

Click at the above pic and the ans will appear.

Hope it helps :)

please anyone help me to answer this questions.plzz... it's very urgent..

Answers

Answer:

1) 3 applications of pressure in daily life are :-

● The area of sharp edge of knife, scissor or handsaws are much less then blunt edge. So, for same total force pressure is more for sharp edges than the blunt one. Hence sharp knife, scissors etc, cuts easily than a blunt one.

●Broad handles in bags and suitcases are provided for the comfort. Broad handles have large area. So, the pressure exerted on hands and shoulders would be small while carrying the bags and the suitcases.

●Trucks carrying heavy loads have more than four tyres. More tyres in case of trucks increase the area of contact with the road. This results in reduced pressure on the tyres.

2) Area of the surface which is on ground = 1.5×1

= 1.5m^2

Mass of the block = 300kg

Force applied by the block = Mass × g = 300×10

= 3000N (where g = acceleration due to gravity )

Pressure = Force applied / Area of the surface

= 3000N / 1.5m^2

= 2000 Pa

3)

a) The above experiment signifies that more the area of the surface of an object , less the pressure an object applies.

b) B exerts the minimum pressure because the area of its surface to ground is greater than others & as it has more area of surface , it exerts less pressure. ( area is inversely proportional to pressure )

c) D exerts the maximum pressure because the area of its surface to ground is lesser than others & as it has less area of surface , it exerts more pressure. ( area is inversely proportional to pressure )

d) It depend upon the way an object is kept on ground. If an object is kept in such a way dat the area of the surface to the ground is more , then pressure will be least exerted .If an object is kept in such a way dat the area of the surface to the ground is less, then pressure will be exerted more .

e) Do it yourself . only i will suggest that make the tip of the cone ( which is to the ground ) more narrower.

Explanation:

A ball is thrown upward from an initial height of 1.5m the ball reaches a height of 5m then falls to the ground . What Is the distance traveled by the ball? What is the displacement of the ball?

Answers

Answer:

8.5m  and 3.5m

Explanation:

In this problem, we are expected to solve/find the total distance traveled and also the displacement of the ball.

given that the initial height is 1.5m and was thrown to a height of 5m

the total distance covered when the ball falls to the ground

Note (see attached a rough sketch for the pictorial explanation)

1.  The distance for A to B= 3.5 m

2. The distance from B to A= 3.5 m

3. The distance fro A to C= 1.5 m

the total distance is 3.5+3.5+1.5= 8.5m  

the displacement is simply the difference  between the final position and the initial position

displacent= 5-1.5= 3.5m

The atmospheric pressure at normal conditions is equal to 10.33 m under water. Then 1.0mm mercury equals to
mm water.

Answers

Answer:13.6

Explanation:

Calculate the de Broglie wavelength of a 4.5-MeV α particle. Explain if a relativistic or non-relativistic approach is required

Answers

Answer:

4.4x10^-32m

Explanation:

Using

Wavelength = hc/E

= 6.63*10^-34 * 3x10^8/ 4.5 x10^ 6ev

= 4.4*10^-32m

Yes a relativistic approach is used because the particle moves at the speed of light

Other Questions
Add and subtract fraction Given segment CE and point D that lies on CE, find CD if CE = 15, CD = 30 + 3x, and ED = 25 + 2x (x) = 5x - 9 find each value Identify the mistake in this sentence.We brought a day's supply of granola water andsandwiches.-apostrophe-commas-fragment-run-on Nina's grades could be better. She gets about five hours of sleep every weeknight and ten hours per night on weekends. How much sleep should she get to better concentrate on schoolwork? Five to six hours every night nine to ten hours every night a total of forty hours a week a minimum of eighty hours a week Which best describes the author's purpose in "A Drop in the Bucket"? what are the steps to finding a midpoint with decimals? How would an engineer know if a product design were feasible?The design has never been developed before.O The design fits into the engineer's original vision.O The design has already been proven to keep the cost of the project down.O The design meets all of the criteria and limitations designated by the project. Write in standard notation 6.078 x 10 expo 3 Which three actions does a good writer take? The writer submits the paper a day or two after the deadline. The writer accepts and implements constructive feedback about the paper. The writer starts the research a day before the paper is due. The writer practices writing several drafts of the paper. The writer leaves revising the paper to the teacher or a peer. The writer makes sure there are no grammatical errors in the paper. In an informational text, information that is clearly stated is known as______ information. impliedinferredfactexplicit A property insurance policy is issued at a total cost of $2,540 for 6 months. If the insurance company offers a one-time $50 rebate, what is the cost per month? When a country has a large population, but very little arable land, what challenges might it experience? evaluatethe expression (-0.3)^4. what is the value of the expression How to prevent environmental hazards? How do you define mathematics? 11) What are the three primary uses of computers for biologists?please help due today When you look into a mirror, you see your reflection. Explain how this relates to reflections ingeometry. how did phoenicians protect themselves on their travels Calculate the area of the shaded region