The Ampacity (current-carrying capacity) of a conductor must not be less then the rating of the_________
protecting that conductor

The answer is True. When an outlet is discontinued, abandoned or removed from a cellular concrete floor raceway, the sections of circuit conductors supplying the outlet shall be removed from the raceway. Based on the information provided.

Always choose conductors for a circuit conductors that are not smaller than the "minimum ampacity" of the apparatus.

By doing this, the conductor is guaranteed to be able to properly withstand the current flowing through it without overheating or harming the circuit or other machinery.

Based on the anticipated load and installation circumstances, the National Electrical Code (NEC) provides ampacity tables and formulas to assist electricians and designers in choosing the proper conductor size. It is crucial to remember that choosing a conductor that is too tiny for the load it will carry can lead to overheating, equipment damage, and even fire hazards, while choosing a conductor that is too large will result in higher material and installation expenses.

Learn more about  circuit conductors  here

https://brainly.com/question/31566492

#SPJ11

The National Electrical Code (NEC) is a standard set of safety requirements for electrical installations in the United States. Section 514.3(B)(2) of the NEC provides requirements for the installation of electrical equipment in Class I, Division 2 locations in motor fuel dispensing facilities.

Class I, Division 2 locations are areas where flammable gases or vapors are present in quantities sufficient to create a hazardous atmosphere. In such locations, it is important to take precautions to prevent the ignition of these gases or vapors, which could result in an explosion or fire.To minimize the risk of ignition, section 514.3(B)(2) requires that electrical equipment in Class I, Division 2 locations at motor fuel dispensing facilities or commercial garages must be installed with at least 10 feet of clearance to any edge, extending in any direction. This clearance is intended to prevent accidental contact with electrical equipment and reduce the risk of sparking or arcing, which could ignite flammable gases or vapors.

Learn more about installation here

https://brainly.com/question/13267432

#SPJ11

According to the National Electrical Code (NEC) 250.68(a), the connection of a grounding electrode conductor to a grounding electrode shall be made in a manner that will ensure a permanent and low-impedance grounding path.

This means that the connection should be made in a way that ensures good conductivity and does not easily loosen or break over time.

The NEC further specifies that the connection should be made by exothermic welding, listed lugs, listed pressure connectors, listed clamps, or other listed means. These methods of connection ensure a reliable and low-impedance grounding path that can withstand the effects of weather, corrosion, and physical stress.

In the case of a concrete encased driven or buried grounding electrode, the connection should be made by one of the methods listed above, and the grounding electrode conductor should be connected to the electrode by welding, brazing, or by use of a listed clamp that exerts pressure on the electrode.

This ensures a reliable and low-impedance grounding path for the system.

Learn more about grounding electrode here:

https://brainly.com/question/31494083

#SPJ11

Foods that are fried in deep fat receive energy through conduction. The meal is uniformly cooked as a result of the hot oil heating the food's surface, which subsequently transfers heat to the centre.

Food is immersed in heated oil during the deep-frying process of cooking. The food's surface comes into touch with the heated oil when it is placed in the pan. Conduction is the method by which the heated oil conducts heat to the food's surface. Food is evenly cooked as a result of heat conduction from the surface to the centre of the food as it heats up. Conduction, which is the movement of heat through a solid or stationary fluid from a hotter location to a cooler region, is the term used to describe this heat transfer via the meal. As a result, the food receives energy from the heated oil, becoming crispy and delicious.

learn more about food's surface here:

https://brainly.com/question/16945643

#SPJ11

To reach an evaporator for cleaning, you need to remove the access panel or cover from the air handler.

To clean an evaporator coil in an air conditioning system, you typically need to remove the access panel from the air handler unit. The evaporator coil is located inside the air handler unit, which is usually found in an indoor closet, attic, or basement.

This will allow you to access the evaporator coils, which are typically located inside the air handler unit. It is important to turn off power to the air handler before removing the access panel and proceeding with cleaning to avoid electrical shock.

Learn more about evaporator at https://brainly.com/question/2013258

#SPJ1

Answer:

c.certification

Explanation:

hope this helps!

D) In all cases. If the auditor lacks independence, it means they are not able to perform their duties objectively and impartially regarding the information.

This lack of independence is considered pervasive, which means it affects the entire audit. Therefore, a disclaimer of opinion must be issued in all cases where independence is lacking, regardless of whether the client requests it or the materiality of the issue.

The disclaimer states that due to information limitations in the investigation, the auditor cannot satisfy himself that all financial statements fairly represent the auditor's work with the client or that the relationship is not independent according to the assessment criteria. For an audit to be effective, the external auditor must be independent of facts and values ​​and take all reasonable steps to comply with audit standards and acceptability as prescribed by the AICPA or, if applicable, the Public Company Accounting Oversight Board. (PCAOB).

Learn more about information:

brainly.com/question/31059452

#SPJ11

D) Adverse. An adverse audit report is issued when the auditor concludes that the financial statements are not fairly presented and cannot be relied upon.

According to the audit reports guide, there are four types of audit reports that auditors can issue after examining the financial statements of a company. These are:

- Unqualified audit report: This is the best type of audit report that a company can receive. It means that the auditors found no material misstatements in the financial statements and they are prepared and presented fairly in accordance with the applicable accounting standards. The auditors express an unqualified or clean opinion on the financial statements¹².

- Adverse audit report: This is a type of audit report that indicates that the auditors found material and pervasive misstatements in the financial statements that affect their overall reliability and accuracy. The misstatements can be due to errors, fraud, non-compliance, or significant disagreements with the management. The auditors express an adverse or negative opinion on the financial statements, meaning that they do not present fairly the financial position, performance, and cash flows of the company¹².

Therefore, based on this information, the answer to your question is: **D) adverse**. An adverse audit report will be issued if the auditor concludes that the financial statements are not fairly presented.

Learn more about audit report here:

brainly.com/question/29354364

#SPJ11

The bending radius in type AC cable should be made to prevent damage, and the curve of the inner edge of any bend should not be less than 5 times the diameter of the cable, as specified in the NEC section 320.24.

Pull the cord to unplug them from the outlet was one of the other answers to the question. Carry them by the cord, option C. D) Keep them close to outlets and on the prevent damage work table in a location that is simple to reach.

Read the manufacturer's directions for proper usage and maintenance of your tools to avoid harm.

These days, tools are pricey. Because of this, if you want to use them for a long time, you must take good care of them and use them appropriately. You must first study the manufacturer's instructions for the use and upkeep of the tool because of its complexity. By doing so, you'll make the most of their potential and employ them more effectively for the right tasks.

Learn more about prevent damage here

https://brainly.com/question/11156977

#SPJ11

The correct answer is (a) accumulated count equals the preset count.

PLC (Programmable Logic Controller) counters are used in automation systems to count the number of events or occurrences of an input signal.

For such more question on automation

https://brainly.com/question/30088157

#SPJ11

The answer is A. Transmission Control Protocol. TCP stands for Transmission Control Protocol, which is a standard Internet protocol that governs how data is transmitted over the internet. TCP works together with another protocol, IP (Internet Protocol), to ensure reliable and efficient delivery of data packets between networked devices.

TCP is a connection-oriented protocol, which means that it establishes a reliable and error-checked communication channel between two endpoints before transmitting data.

This ensures that data is transmitted in the correct order, without loss or duplication, and with error detection and correction.

TCP is used extensively in various applications, such as web browsing, file transfer, email, and multimedia streaming. It is a fundamental protocol that underpins the functioning of the internet and enables reliable communication between devices across different networks.

Overall, TCP is an essential protocol for the efficient and secure transmission of data over the internet, and it plays a crucial role in ensuring that users can access and share information reliably and efficiently.

Learn more about Transmission Control Protocol here:

https://brainly.com/question/9979148

#SPJ11

Flexible cords and cables may run through holes in walls, structural ceiling, suspended ceilings, dropped ceilings, or floors in accordance with the guidelines outlined in section 400.8(2) of the National Electric Code.

These guidelines ensure that the cords and cables are installed in a safe and secure manner and do not pose a risk of damage or fire hazard to the surrounding structure.Flexible cords and cables shall not be run through holes in walls, structural ceiling, suspended ceilings, dropped ceilings, or floors. This is specified in section 400.8(2) of the National Electrical Code (NEC).

To learn more about cables click the link below:

brainly.com/question/28168763

#SPJ11

An alternator is an electrical generator that converts mechanical energy into electrical energy. The output of the alternator is typically alternating current (AC), which is produced by rotating a magnetic field within the stator.

A rotating field alternator current changes the flow in the output windings by rotating the magnetic field around the stator. In a rotating field alternator, one notable benefit of taking the output from the stator is that the brushes are not required to manage the output current. Electrical contacts called brushes are used by the generator's stationary and revolving components to transfer electricity. The large currents and friction produced during operation cause the brushes in conventional generators to deteriorate over time. The brushes are removed when the output is taken straight from the stator windings, lowering maintenance requirements and boosting generator dependability.

A rotating field alternator also has the benefit of generating a more reliable and consistent

Learn more about alternating current (AC) here

https://brainly.com/question/30675305

#SPJ11

Where flexible tubing is used to enclose the conductors, the tubing shall extend from the last insulating to not less than 6 inches. This requirement is stated in section 314.18(c) of the National Electrical Code (NEC).

Electricity can flow through metals, molten ionic compounds, and electrolyte solutions.

The letters that complete the gaps are;

Because there are available free electrons within metals, they act as conductors.

An ionic solid is not a conductor because the ions, which are the charge carriers, are tied together in the lattice.

The crystal breaks apart in the molten state, releasing its ions. The molten ionic material is a conductor as a result.

Because mobile ions are charge carriers in solution, electrolyte solutions like HCl transmit electricity. The number of ions in the solution reduces as the solution's concentration rises.

Learn more about conductors here

https://brainly.com/question/18084972

#SPJ11

True. All cleared DoD civilian, military, and contractor personnel who generate or create classified material from authorized classified sources are derivative classifiers.

The United States Department of Defense (DoD) is a federal agency responsible for providing the military forces needed to deter war and protect the security of the country. The DoD is the largest employer in the world, with over 1.3 million active-duty service members, more than 800,000 civilian personnel, and over 800,000 reserve and National Guard members. The DoD operates under civilian control and is led by the Secretary of Defense, who is a member of the President's Cabinet. The department's responsibilities include providing military forces for the protection of the nation, managing military operations and readiness, conducting research and development, and managing military installations and facilities. The DoD also works closely with other federal agencies, including the Department of State and the Department of Homeland Security, to coordinate national security efforts.

Learn more about DoD here:

https://brainly.com/question/30324752

#SPJ11

The statement given in the question is true. The National Electrical Code (NEC) permits the use of nonmetallic conduit with conductors for direct burial underground installation, in cinder fill, or encased or embedded in concrete. This allowance is specified in Article 353 of the NEC, which outlines the requirements for nonmetallic underground conduit systems.

For such more question on nonmetallic

https://brainly.com/question/2834632

#SPJ11

The protocol used to discover a physical address from a known logical address is Address Resolution Protocol (ARP). ARP uses a message type called ARP request to obtain the physical address corresponding to a logical address.

When an ARP request is sent, it is broadcasted to all devices on the local network, and the device with the matching logical address will respond with an ARP reply containing its physical address.The protocol used to discover a physical address from a known logical address is the Address Resolution Protocol (ARP). ARP uses a message type called an ARP Request to query for the corresponding physical (MAC) address of a given logical (IP) address.

Learn more about  physical here

https://brainly.in/question/817604

#SPJ11

For this project, as a musician synthesizing upbeat music for modern ballet, I would most likely work with electronic or techno music.

These genres offer a range of sounds and beats that can be manipulated and synthesized to create a unique and energetic sound for the dance performance. Additionally, electronic and techno music has been used in many modern ballets and contemporary dance performances, making them a popular choice for this type of project.
As a musician tasked with synthesizing upbeat music for modern ballet, you would most likely work with electronic dance music. This genre often incorporates synthesizers and can create an energetic atmosphere suitable for a contemporary ballet performance.

To know more about musicians synthesizing:- https://brainly.com/question/4810930

#SPJ11

Hi! As a musician asked to synthesize upbeat music for a modern ballet, you would most likely work with electronic dance music.

This genre is known for its energetic and lively rhythms, making it a suitable choice for a contemporary modern ballet performance.

Learn more about modern ballet: https://brainly.com/question/24643077

#SPJ11

True. Biometric access control systems utilize individually unique characteristics, such as fingerprints and voice, to authenticate that an individual is authorized to gain access to a designated area.

Biometric access control systems are designed to authenticate the identity of an individual based on their unique biological or behavioral characteristics such as fingerprints, voice, iris or facial features. These systems are more secure than traditional authentication methods such as passwords or PINs, as biometric traits are unique to each individual and cannot be easily replicated or stolen. By using a biometric access control system, only authorized individuals with registered biometric data can gain access to the designated area.

Learn more about data here-

https://brainly.com/question/13650923

#SPJ11

The firewall security feature that limits the volume of traffic from individual hosts is called "Flood guard".

This feature is used to prevent denial of service attacks by limiting the amount of traffic that can be sent from a particular host to the network. Stateful inspection is a firewall security feature that examines the traffic and keeps track of the state of each connection.

Loop protection is used to prevent network loops by disabling a port when a loop is detected. Network separation is a security feature that isolates different parts of the network to prevent unauthorized access. The firewall security feature that limits the volume of traffic from individual hosts is D. Flood guard.

Flood guard is designed to prevent excessive traffic or Denial of Service (DoS) attacks by limiting the volume of traffic from individual hosts. This feature helps maintain the stability and security of a network.

Note: While the terms "loop," "stateful," and "firewall" are relevant to network security, they are not directly associated with the specific security feature that limits traffic volume from individual hosts as mentioned in the question.

Learn more about network click  here:

brainly.com/question/14276789

#SPJ11

Where the number or current-carrying conductors in a raceway or cable, when it exceeds the allowable ampacity of each conductor it shall be derated. This is stated in section 310.15(b)(3) of the National Electrical Code (NEC).

Current-carrying conductor: a conductor which carries the electric current under normal conditions [this term is defined in the IEC TS 62257-5-2015].Current-carrying conductor: a conductor which carries the electric current under normal conditions [this term is defined in the IEC TS 62257-5-2015].

Note 1 to entry: The line conductor (L), the neutral conductor (N), the mid conductor (M), the PEN conductor, the PEM conductor and the PEL conductor are the current-carrying conductors. The protective conductor (PE) is not the current-carrying conductor.

A protective conductor under normal conditions conducts almost no electric current, because there are no faults and no induced currents, such as earth fault currents. Therefore, it is not considered a current-carrying conductor and is not included in the total number of conductors in electrical circuits, networks and systems.

learn more about raceway here:

https://brainly.com/question/30821238

#SPJ11

The concept you're referring to, which is based on both an asset's importance to national security and the effect of its partial or complete loss, is: a. Criticality

Criticality refers to the degree to which an asset or system is essential to the national security interests of a country. It takes into account both the asset's importance and the potential consequences of its partial or complete loss. Threat, on the other hand, refers to the likelihood or probability of an attack or other type of adverse event occurring that could cause harm to a system or asset. Vulnerability, meanwhile, refers to the weaknesses or gaps in security or protection that could be exploited by a threat actor to compromise or damage an asset or system. Therefore, while threat and vulnerability are important factors to consider when assessing criticality, they are not the same as criticality itself. Criticality is a broader concept that encompasses both the importance of an asset and the potential consequences of its loss, regardless of the specific threats or vulnerabilities involved.

Learn more about asset here-

https://brainly.com/question/14404094

#SPJ11

B. A seal rock is commonly made of fractured limestone or poorly cemented sandstone.

Seal rocks are formations that act as barriers, preventing the flow of hydrocarbons out of an oil or gas reservoir. They are typically made of impermeable rock, such as shale or siltstone, but can also be made of fractured limestone or poorly cemented sandstone. These types of rocks are less effective at sealing than impermeable rock, but can still provide a significant barrier to the flow of hydrocarbons. Fractured limestone or poorly cemented sandstone can still provide a good seal because their pores are filled with fine-grained sediment, which can slow the movement of fluids through the rock. However, these rocks are not as reliable as impermeable rock, and may require additional sealing mechanisms, such as natural gas, to prevent the flow of hydrocarbons out of the reservoir.

Learn more about Seal rocks here:

https://brainly.com/question/31100773

#SPJ11

The difference in water surface elevations between reservoir A and reservoir B is 1.88 ft, with the negative sign indicating that reservoir B is at a higher elevation than reservoir A.

Determining the difference in water surface elevations between reservoir A and reservoir B, use the Bernoulli equation, which relates the pressure, velocity, and elevation of a fluid flowing in a pipe.

The Bernoulli equation can be expressed as:

P1/γ + V1²/(2g) + z1 = P2/γ + V2²/(2g) + z2 + hf

where P is the pressure of the fluid, γ is the specific weight of the fluid, V is the velocity of the fluid, g is the acceleration due to gravity, z is the elevation of the fluid, and hf is the head loss due to friction.

Supposing there is fully turbulent flow, use the Darcy-Weisbach equation to calculate the head loss due to friction:

hf = f * (L1/D1) * (V1²/2g)

where f is the Darcy-Weisbach friction factor, L is the length of the pipe, and D is the diameter of the pipe.

We can also use the coefficient of sudden contraction to relate the velocities at the entrance and exit of the second pipe:

V2 = C * √(V1² - Vc²)

where C is the coefficient of sudden contraction and Vc is the velocity of the fluid at the entrance of the second pipe.

Substitute the given values and solve for the difference in water surface elevations:

P1 = P2 (since the two reservoirs are open to the atmosphere, the pressures cancel out)

γ = 62.4 lb/ft³ (the specific weight of water)

Vc = 22.5 cfs / (π/4 * (2 ft)²) = 1.41 ft/s (the velocity of the fluid at the entrance of the second pipe)

f = 0.001 (the friction factor for cast iron pipes)

C = 0.36 (the coefficient of sudden contraction)

g = 32.2 ft/s² (the acceleration due to gravity)

L1 = L2 = 500 ft (the lengths of the pipes)

D1 = 2 ft and D2 = 1.5 ft (the diameters of the pipes)

V1 = 22.5 cfs / (π/4 * (2 ft)²) = 2.83 ft/s (the velocity of the fluid at the entrance of the first pipe)

V2 = C * sqrt(V1² - Vc²) = 1.79 ft/s (the velocity of the fluid at the exit of the second pipe)

Using the Bernoulli equation:

z1 - z2 = (V2² - V1²)/(2g) - hf

Substituting the values:

z1 - z2 = (1.79² - 2.83²)/(2 * 32.2) - 0.001 * 500/2 * (2.83²)/(2 * 32.2) - 0.001 * 500/2 * (1.79^2)/(2 * 32.2)

z1 - z2 = -1.88 ft

Therefore, the difference in water surface elevations between reservoir A and reservoir B is 1.88 ft, with the negative sign indicating that reservoir B is at a higher elevation than reservoir A.

learn more about water surface elevations: https://brainly.com/question/21030021

#SPJ1

False. It is advisable to follow guideline outline by the lab or consult the lab instructor before downloading.

There may be unique guidelines and limitations on obtaining data or visiting particular websites at some institutions or labs. To avoid any potential problems, always verify with your lab instructor or follow the specified instructions.

These download guidelines have been put in place to avoid downloading information that might be considered sensitive, illegal, or detrimental to the operating systems.

Find more exercises on download information guidelines;

https://brainly.com/question/30024121

#SPJ4

A sine wave has two maximum points (peaks) during one cycle: one positive maximum and one negative maximum.

A sine wave's peak to peak value is twice its peak value. As a result, the waveform's total peak to peak value is 2 x 80 VAC, or 160 VAC.

A sine wave's peak to peak value is a crucial indicator of the waveform's amplitude. It is determined by multiplying the waveform's peak value by two. Given that the peak value of this specific waveform is 80 VAC, its peak to peak value is 2 x 80 VAC, or 160 VAC. This peak to peak value represents the total number of voltage swings experienced by the waveform from its base to its crest. This waveform's peak to peak value is a helpful

Learn more about peaks here

https://brainly.com/question/30491931

#SPJ11

Threadless couplings that are approved for use with intermediate metal conduit in wet locations shall be of the compression type. This is specified in section 342-42(A) of the National Electrical Code (NEC) which outlines the requirements for electrical installations in wet locations. Threadless couplings are a type of connector that join two lengths of conduit together without the need for threading. This type of coupling is commonly used with intermediate metal conduit, which is a type of electrical conduit that is typically used for exposed or outdoor installations.

In summary, when using intermediate metal conduit in wet locations, it's essential to use rain-tight threadless couplings to maintain a secure connection and prevent moisture ingress. This ensures the electrical system's safety and proper functioning.

Learn more about rigid metal conduit here: brainly.com/question/30772913

#SPJ11

The major deterrent to the widespread use of desalination is its high cost, as well as the environmental impact of the process. Desalination plants require significant energy to operate and can harm marine life with their intake and discharge systems.

While it is a promising solution for areas facing water scarcity, finding ways to make the process more affordable and sustainable is key to its widespread adoption.

Thus, the major deterrent to the widespread use of desalination is the high cost associated with the process. Desalination requires significant energy consumption and advanced infrastructure, which can be expensive to build and maintain, limiting its adoption on a larger scale.

Learn more about desalination here:- brainly.com/question/26016496

#SPJ11

The technician could use the "ipconfig /displaydns" command in the command prompt to show any cached DNS entries for the telnet site.

The technician could use the "ipconfig /displaydns" command in the command prompt to show any cached DNS entries for the telnet site. This will display a list of all recently accessed DNS entries, including the telnet site in question. If the entry is outdated or incorrect, the technician can then flush the DNS cache using the "ipconfig /flushdns" command to ensure that the computer obtains the correct DNS information for the telnet site.

Learn more about command here

https://brainly.com/question/30319932

#SPJ11

The address 10.0.0.0 belongs to the Class A address range, which is a legacy address class. Class A addresses are defined by having the first octet in the range of 1 to 126, and the remaining three octets being available for host addressing.

The address 10.0.0.0 is a private IP address that belongs to the Class A range of IP addresses. It is often used as the default address for many routers and network devices, and is commonly used in private networks that do not require direct connectivity to the Internet. The address range from 10.0.0.0 to 10.255.255.255 is reserved for private networks and is not routable on the Internet. This allows organizations to use these addresses for internal communication without requiring unique public IP addresses for every device. The use of private IP addresses helps to conserve public IP address space and improves network security by limiting direct access to internal resources from the Internet.

Learn more about address 10.0.0.0 here:

https://brainly.com/question/13783710

#SPJ11