technician a says a torsion bar is a type of shock absorber. technician b says shock absorbers slow the upward and downward movement of the vehicle after a bump. who is correct?

Using the knowledge of computational language in python it is possible to write a code that function called foo(), which is passed a value, and returns a value.

function foo

parameter p1 //which is equal to "JOHN PAUL SMITH" in this case

if (p1 has more than 1 occurrence of " " [i.e. more than 1 spaces])    

  ReturnValue = everything after the 2nd " " in p1  

else if (p1 only has 1 occurrence of " " [i.e. 1 space])      

  ReturnValue = everything after the 1st " " within p1  

else //[i.e. no spaces]

  ReturnValue =  p1  

endif

endif

return ReturnValue

See more about python at brainly.com/question/18502436

#SPJ1

Accreditation is a process that determines whether educational programmes meet predefined quality standards.

Accreditation is not permanent; it must be renewed on a regular basis to ensure that the educational program's quality is maintained.

To learn more about Accreditation refer :

https://brainly.com/question/22560558

#SPJ1

A fishbone diagram, as the name implies, is a representation of a fish skeleton.

Underlying problems of the Fish head:

The underlying problem is represented by the fish's head (facing right), and the causes are represented by the bones of the skeleton; the ribs branch off the back and represent major causes, while sub-branches represent root causes.

The 4M method identifies and groups causes that have an impact on a specific effect. The 4M categories (Material, Method, Machine, and Man) are frequently used in Kaoru Ishikawa's Cause-Effect

What is a Fishbone Diagram ?

A fishbone diagram is a cause-and-effect discovery tool that assists in determining the cause(s) of defects, variations, or failures in a process.

In other words, it aids in the breakdown of root causes that may contribute to an effect in successive layers.

A fishbone diagram, also known as an Ishikawa diagram or cause-and-effect analysis, is one of the primary tools used in root cause analysis.

To know more about Diagram, visit: https://brainly.com/question/24457739

#SPJ4

The purpose of the idler gear is to either change the direction of rotation of the driven gear or transfer power to a location which is farther from the driver shaft.

A motion is produced when two gears are placed next to one another and move in opposing directions. A third gear, called an idler gear, is used between the two gears when they both need to move in the same direction. The only thing it changes is the direction in which the second gear spins, and it only transfers motion from one gear to the other.

The "driven gear" accepts motion, and the "driving gear," which transmits motion, are the gears that the idler connects. As if the idler gear weren't there, the gear ratio between the driving and driven gears is calculated in the same way.

Learn more about driven gear

https://brainly.com/question/12513059

#SPJ1

66.7 J of work is supplied by the refrigerator in order to remove 200J of heat from its interior. Which is having COP of 3

COP of refrigerator is defined as the ratio of heat removed from the substance (refrigerator) to Work input.

Full form of COP is Coefficient of Performance.

Formula of COP = Heat Removed(Q)/ Work input( W)

we have COP =3

Q= 200J substitute in formula

3=200/w ⇒ w=200/3 ⇒ 67J

Hence 66.7 J of work is supplied by the refrigerator in order to remove 200J of heat from its  interior. Which is having COP of 3

To study more about Heat :https://brainly.com/question/19666326

You can use an array to do the task :

double[] temperatures = new double[365];

An array is a data structure that is used to store a collection of items. It is typically used to store items of the same type, such as a list of integers or a list of strings.

Each item in an array is called an element, and each element has a specific index, or position, in the array. Arrays are commonly used in programming because they allow for efficient access and manipulation of large amounts of data.

To Know More About Datatypes, Check Out

https://brainly.com/question/28706924

#SPJ1

In order to avoid fits, To reverse the conduit's direction, to modify the conduit's elevation.

The most typical bend is a 30° bent, followed by another 30° bend, for a total bend of 60°, however this is not always necessary. All hand benders include bend markings of 10, 22, and, on occasion, 45 or 60 degrees. These bends should be employed when necessary.

a curve at a right angle. a 90° curve. the increase in a conduit section. Stub-up. the conduit's real length after it has been bent.

To know more about conduit's visit:-

https://brainly.com/question/19342587

#SPJ4

Steps in order to transform raw data into easy to digest insights for everyone in an organization to use:

1. Collect and transform data from multiple sources

2. uncover trends and inconsistencies using tools such as Data Mining

3. present findings using tools such as visualization

4. take action on insights in real time

The information that is gathered from a source, but in its unprocessed form, is known as raw data. It hasn't been cleaned, arranged, or visually presented yet, let alone processed.

Raw data can be manually typed, written down, recorded, or entered automatically by a machine. Databases, files, spreadsheets, and even source devices like cameras are just a few of the places where you can find raw data. One type of potential energy-containing data is raw data.

Here are some illustrations of raw data:

Learn more about raw data

https://brainly.com/question/26830274

#SPJ1

As soon as you step foot on our campus in lovely Columbia, South Carolina, you'll understand what it means to be surrounded by kind and enthusiastic academics and an engaging and encouraging community culture.

How does LRU function?

When the available space is full, the Least Recently Used (LRU) algorithm updates the cache. By deleting the least recently used values, it enables us to obtain the values more quickly. LRU cache is a frequently asked question that is typically asked directly but may occasionally be asked in a different way.

Why does LRU outperform FIFO?

The most recently used items are retained by LRU. FIFO only stores items that have just been added. Because there are typically items put to memory only once and never used again, as well as those introduced and utilized frequently, LRU is normally more efficient.

To know more about LRU visit;

https://brainly.com/question/29602689

#SPJ4

The scale of the blueprint tells us the boundary of the drawing to real space. The correct option is a.

It is a photographic print in white on a bright blue background or blue on a white background, particularly useful for copying maps, mechanical drawings, and architect's designs

The plan of the construction is a project prediction that is slightly auto cad. The scale factor provides information on the dimensions and measurements of things represented by smaller copies in maps, blueprints, scale drawings, and scale models. The scale tells us how much actual length some length on the scale graphic represents.

Therefore, the correct option is a, Boundary.

To learn more about the scale of the blueprint, refer to the link:

https://brainly.com/question/8887076

#SPJ1

The peak of the tropopause is represented by area 8 of the United States High-Level Significant Weather Prog.

A map showing the expected weather forecast for a future date is called a prognostic chart. These graphs, which are produced by atmospheric models as a result of numerical weather prediction, include data on temperature, wind, precipitation, and weather fronts.

The Low-Level SWC, or Low-Level Significant Weather Chart, is a forecast chart used in general aviation for flight planning and preparation. It describes the climate in central Europe during a specific period of time. Areas with notable weather phenomena are therefore highlighted.

To know more about tropopause visit:-

https://brainly.com/question/11821902

#SPJ4

Answer:

what's the question that you want us to answer.

Water is used as an ekman spiral fluid layer.

The Coriolis effect results in the Ekman spiral, which was proposed in 1902 by Swedish physicist Vagn Walfrid Ekman (1874–1954). Because of the wind's force, surface water molecules move, dragging deeper layers of water molecules with them.

Ekman layer, a vertical area of the ocean subject to surface water movement caused by wind. This layer, which bears the name V. Walfrid Ekman after a Swedish oceanographer, is around 100 meters deep (about 300 feet).

To know more about Ekman spiral fluid visit :-

https://brainly.com/question/14440533

#SPJ1

Stainless steels are susceptible to cracking when tensile tension and a certain corrosive environment are present. Stress corrosion cracking is the name of this method of assault (SCC).

SCC typically happens in particular alloy-environment-stress configurations. Tensile stress and a corrosive environment work together to cause a cracking process known as stress corrosion cracking. SCC often affects materials in a range between dry cracking and their fatigue threshold.

The corrosion resistance and stress corrosion cracking resistance of 304L stainless steel are improved with the addition of ruthenium (Ru).

To know more about stress-corrosion visit:-

https://brainly.com/question/13102201

#SPJ4

For numbers, any digital systems that perform arithmetic operations must display the "sign" and "magnitude."

A "digital system" is a collection of components that uses hardware, software, and networks. For instance, a computer has a central processing unit, a hard drive, a keyboard, a mouse, and a monitor, among other things. One system may be made up of a multitude of different pieces. There are just a few discrete values available for signals in digital systems. Analog systems take values from a continuous set, whereas Mixed Signal Systems use both Digital and Analog components. The digital and analog systems are commonly used to represent signals. The numerous digital systems that are all around us include computers, smartphones, scanners, cash registers, and digital ticket readers.

Learn more about digital systems  from

brainly.com/question/4507942

#SPJ4

"Allow the connection" to all programs, all protocols, and all ports with a scope of 192.168.0.0/24 is an example of this type of security setting: ACL.

In Computer technology, ACL is an abbreviation for access control list and it can be defined as a security technique (setting) that is designed and developed to enable a computer system determine whether or not an end user has the minimum requirement, permissions, and credentials to access, use, or view the file(s) and folder resources that are stored on a computer.

This ultimately implies that, an access control list (ACL) is a security feature that can be implemented by using a firewall in order to help prevent or allow entry of an end user, who wishes to use a computer system.

Read more on access control here: brainly.com/question/3521353

#SPJ1

Complete Question:

An administrator navigates to the Windows Firewall with Advanced Security. The inbound rules show a custom rule, which assigned the action, "Allow the connection" to all programs, all protocols, and all ports with a scope of 192.168.0.0/24. This is an example of what type of security setting?

Answer:Shock Absorbing

Explanation:

The limited approach boundary distance for an exposed fixed circuit part on a 480y/277-volt distribution panel is 3'6".

An exposed Fixed Circuit part is, a bare conductor or another circuit component that is stationary and will not move. This is the most often used Limited Approach Boundary value. Exposed Movable Conductor - A bare conductor that can move (e.g., an overhead transmission line conductor).

The limited approach boundary distance for an exposed fixed circuit part on a 480y/277-volt distribution panel is 3 feet 6 inches, which indicates that persons and objects should not go any closer to live electrical parts than this distance in order to avoid electrical shock or another injury.

Learn more about fixed circuits;
https://brainly.com/question/15256538
#SPJ1

Standard or "S" beams, wide flange or "W" beams, and pile or "H" beams are the three types of structural steel beams and girders that are available. Standard beams are designated by the letter S, the nominal web height in inches, the weight per foot in pounds, and finally the type of material.

A steel structure is what?

A steel structure is a metal building composed of solid structural steel pieces that are joined together to support loads. These buildings are dependable and use less raw materials than others, such as concrete, due to the high strength of steel.

What are the many types of steel structures?

In addition to L-beams, Z-shapes, HSS-shapes, L-shapes (angles), structural channels (C-beams, cross sections), T-shapes, rail profiles, bars, rods, and plates, structural steel also comes in a variety of shapes, including open joists made of web steel.

To know more about steel structures visit;

https://brainly.com/question/476531

#SPJ4

Below is the design of the circuit in Verilog, with syntax and all rule of language like commas, semicolons etc.

VERILOG CODE IN STRUCTURAL MODEL:

1) VERILOG CODE OF D FLIP FLOP

module DFF (CLK, D, ARSTN, Q);

input CLK, D, ARSTN;

output Q;

reg data = 1'b0;

  if (ARSTN)

      data <= 1'b0;

  else

      data <= D;

assign Q = data;

endmodule

2) VERILOG CODE OF MUX

module MUX (d0, d1, SEL, Y);

input d0, d1, SEL;

output Y;

assign Y = SEL ? d0 : d1;

endmodule

3) VERILOG CODE OF TOP FILE

module circuit (XIN, data_in, CLK, ARSTN, SEL, XOUT);

input XIN, data_in, CLK, ARSTN, SEL;

output XOUT;

wire s0, s1;

DFF UUT0 (CLK, data_in, ARSTN, s0);

MUX UUT1 (XIN, s0, SEL, s1);

DFF UUT2 (CLK, s1, ARSTN, XOUT);

endmodule

OUTPUT:

To know more about VERILOG, visit: https://brainly.com/question/24228768

#SPJ4

Feathering and a propeller.

It travels from the pump to the exterior of the oil filter, where it is pushed through the filter media to the centre, where it then leaves the oil filter and enters the engine's oil galleries. Additionally, the oil filter contains a bypass valve to prevent the pressure from falling too low if it clogs.

Pumping Oil The oil pump is made to circulate oil through coolers as needed and return it to the oil tank after propeller oil under pressure to the engine's lubrication-dependent elements.

To know more about propeller visit:-

https://brainly.com/question/27922904

#SPJ4

False, Through the buddy function, unary and binary operators can both be overloaded. The friend function also allows for operator overload.

The sizeof operator, typeid, Scope resolution (::), Class member access operator (.), Ternary, or conditional operator (?:) are some operators that cannot be overloaded. These operators cannot be overloaded because it would be syntactically impossible and could lead to serious programming errors.

Both of the aforementioned types provide function overloading, which is the fundamental idea of polymorphism.

To know more about operators visit:-

https://brainly.com/question/20916293

#SPJ4

The least number of products the company can have so that at least two products must be stored in the same bin is 850.

The least common multiple, lowest common multiple, or smallest common multiple of two integers a and b, denoted by lcm in arithmetic and number theory, is the smallest positive integer that is divisible by both a and b.

The least common multiple (LCM) of two numbers is the smallest number that is divisible by both numbers. It can also be calculated for two or more numbers. There are several methods for calculating the LCM of a given set of numbers. One of the quickest ways to find the LCM of two numbers is to prime factorize each number, and then multiply the product of the highest powers of the common prime factors by the LCM of those numbers.

In this situation, since there are 50 aisles, 85 horizontal locations in each aisle, the lowest common multiple for 50 and 85 is 850.

Learn more about LCM on:

https://brainly.com/question/284493

#SPJ1

The small-signal gain of a 20-cm-long rod is 27.4731, while neglecting gain saturation effects.

What is small-signal gain?

A gain medium's small-signal gain (for example, a laser medium in a laser or amplifier) is the gain obtained for an input signal that is so weak that it does not cause gain saturation. In continuous-wave operation, this means that the signal intensity is well below the saturation intensity throughout the gain medium.

In a four-level laser gain medium with negligible ASE and no parasitic lasing, the steady-state small-signal gain is usually proportional to the absorbed pump power and the stored energy.

To know more about amplifier, visit: https://brainly.com/question/14838084

#SPJ4

The following code segment will properly declare and initialize an instance of the type mentioned above. Info myInfo = true; 10,4.99

A collection of symbols meant to signify established, frequently unspoken meanings; a system of symbols or signals used in communication. Code is text written in a programming language by a computer programmer. Examples include programming languages like C, C#, C++, Java, Perl, and PHP. Less formally, text written in markup or style languages like HTML and CSS can alternatively be referred to as "code." A code can be a list of guiding ideas. Our laws make up our legal system, and many people adhere to their own private "code of honour." Code can also refer to a language used to programme computers or a technique for transmitting encrypted messages. In 1303, the term "code" could only be used to describe a set of rules, such as  as a code of conduct.

Learn more about code from

brainly.com/question/28008207

#SPJ4

The moment arm for the resultant hydrostatic force in metres upto 4 significant digits is 0.9491 M.

What is Hydrostatic force?

In the Cummins equation, the hydrostatic forces are the forces on a body caused by changes in hydrostatic pressure on the wetted surface of the body as it moves away from its equilibrium position.

As a result, the hydrostatic forces are proportional to the body displacements xj. Hydrostatic forces are simple linear functions of displacements for small amplitudes of motion, which can be defined by a stiffness coefficient matrix.

This is the standard method for modeling WECs; however, for large amplitudes of motion, and especially when the body surface at the water-plane is not vertical, a nonlinear representation of the hydrostatic forces is preferable.

To know more about Hydrostatic force, visit: https://brainly.com/question/14815733

#SPJ4

Stresses in a Newtonian fluid due to shear. A fluid cannot resist shearing forces while it is at rest. These forces cause it to continuously distort.

Many non-Newtonian fluids are shear-thinning or pseudoplastic, that is the viscosity h) decreases with increasing shear-rate γ. The product, however, constantly grows with increasing shear-rate since the size of the shear stress always does as well.

A fluid that has constant viscosity and a shear rate that is directly proportional to the shear stress is referred to as a Newtonian fluid.

To know more about fluid visit:-

https://brainly.com/question/21708739

#SPJ4

The Maximum Shear Stress will be 7500 pst and

The Normal Stress on 60° with the minor principal plane will be 8750pst.

The Shear Stress on 60° with the minor principal plane will be 2165.063pst.

The answer to the Mohr's circle of stress is attached in this answer below.

What is Mohr's circle?

Mohr's circle is a crucial concept in Civil Engineering that is used in the domain of stress and strain. Mohr's circle depicts stress and strain at various planes for a stressed body in two dimensions. Mohr's circle is a concept used in soil mechanics and material strength to find stress and strains at different planes.

Mohr's circle is a collection of points that represent the magnitude of normal and shear stress at various planes in a stress element. Mohr's Circle can also be used to calculate the normal and shear strains of a plane strain system.

To know more about Mohr's circle, visit: https://brainly.com/question/18372020

#SPJ4

If the addressing mode for the instruction is immediate, then the value that is loaded into the accumulator (AC) will be the value of the instruction itself, which in this case is 800. So the answer would be A) 800.

Explanation in Detail:

In immediate addressing mode, the value to be used by the instruction is encoded directly in the instruction itself, rather than being stored in a specific memory location. This is in contrast to other addressing modes, such as direct or indirect, in which the value to be used by the instruction is stored in a specific memory location, and the instruction specifies the address of that memory location.

For example, suppose the instruction was LDA 900, with an addressing mode of direct. In this case, the value that would be loaded into the AC would be the value stored at memory location 900, which in this case is 900.

To learn more about memory location, visit: https://brainly.com/question/14698134

#SPJ4

53mm is the outside diameter of the tube which is having inner diameter 50mm and carrying a tensile load of 500KN and stress limited to 120MN/m2.

Stress: Internal Resistance offered by a body to the deformation when the force applied on it.

For Hallow steel tube which is having Inner diameter Di =50mm and outer diameter Do=

Tensile load F=500KN and Tensile stress σ=120MN/m2

Stress= Force/unit area σ=[tex]\frac{F}{A}[/tex]

Area of the Hollow steel tube is A= π/4(Do²-Di²)

F=σA ⇒ 500000= 120×π/4 (Do²- (50)²)

500000= 30π(Do²-2500)

500000=30πDo²-75000π

500000-75000π=30πDo²

(500000-75000π)/30π=Do²

Do=52.96(53)mm

Hence outer diameter is 53mm

To Study more about Stress:https://brainly.com/question/25748369