technician a says a faulty unlock relay could cause the power door locks to lock but not unlock the doors. technician b says a faulty actuator could cause this. who is correct?

The prospect for the development of a software-based virtual fuse has been made possible by the growing usage of power field-effect transistors rather than power relays to manage electrical loads on automobiles. The vehicle OEM will benefit greatly from this advancement in a number of ways. Along with the cost of the fuse, further savings will also be made.

A fuse has a thin metal strip inside it that acts as a current path. if the circuit is receiving a significant quantity of current.

An electric fuse is primarily used to guard against overcurrent, short circuits, and improperly matched loads on electrical equipment.

To know more about software-controlled fuses  visit :-

https://brainly.com/question/1851832

#SPJ1

Answer:

True

Explanation:

True. It is useful to inquire about family perspectives on issues inherent in each of the layers when conducting an assessment because this can provide valuable insight into the individual's environment and support system. By understanding the perspectives of the individual's family members, the assessor can gain a more complete understanding of the individual's situation and develop more effective interventions.

The correct answer is A back-end developer writes code that forms the backbone of a website or app.

The project name and version should be included in a file name. No. The date, the author, and the version number must all appear in a file's name. High-fidelity mockups let designers make several changes without compromising the functioning of the design. Recall that you must enter prototype mode by selecting it from the menu in the top-left corner in order to construct a prototype. I'll first arrange my mockups according to the major user flow. In other words, I want my mockups to show the website of the library in the order that people would navigate it. Due of the various connections between the material, a matrix structure enables visitors to choose their own path. The concepts of hypertext, or HTML, are fully utilised by this style of structure.

To learn more about back-end developer click the link below:

brainly.com/question/12957736

#SPJ4

The correct answer is  C) Foggy conditions made visibility poor.   statements about the fatal Tesla accident involving Joshua Brown is not true.

Fog reduces sight to one kilometre, making it impossible for you to see farther than that from where you are now standing. One to two kilometres of sight may be lost due to mist. Fog comes in a variety of forms, including freezing fog, valley fog, advection fog, and radiation fog. The small water droplets hanging in the air are to blame for the decreased visibility. In urban and industrial locations, where there are lots of pollution particles functioning as water droplet nuclei, the fog tends to be the thickest. Although fog may cause precipitation (drizzle), precipitation (drizzle) is not the same thing as fog. Fog, by definition, occurs when visibility is less than one kilometre, says the international definition (0.62 mile).

To learn more about Tesla click the link below:

brainly.com/question/23838761

#SPJ4

The correct answer is portability Boulders, building trusses, and lead ingots would not make good mediums of exchange because they lack the key characteristic

Trade credit is credit that the seller extends to the buyer. Any authorised form of payment for goods and services is money. Money should have two crucial qualities: durability and simplicity. A time deposit is another name for a checking account. Everyday life involves the usage of money. We work hard for money, spend it, and rarely give it any thought. Money is any good that is frequently used as the final payment for goods and services, according to economists. A medium of trade need to be trustworthy, transportable, interchangeable, and have a constant inherent value.

To learn more about portability click the link below:

brainly.com/question/13748255

#SPJ4

Transmitter- A device that senses a process variable using a sensor and produces an output whose steady-state value changes only in accordance with the process variable's preset function.

What is Transmitter?

A device whose steady-state value varies solely as a predetermined function and senses a process variable through the use of a sensor. a process variable that the control signal is perceived in response to. A transmitter's signal is received by an instrument, which then compares it to a predetermined value. An energy converter changes one kind of energy into another. Transducers often transform one form of energy, such mechanical or magnetic, into a measurable quantity on the other end, like an electrical signal. When it comes to process control.

To learn more about Transmitter from given link

brainly.com/question/2084370

#SPJ4

Answer:

Option2  4

Explanation:

Asynchronous Counter is a type of counter in which each flip-flop provides the clk input to the next flip-flop.

What is a Asynchronous Counter?

Asynchronous counters have had an output that really is independent of the clock signal. Because the flip flops in asynchronous counters are fed with different clock signals, output may be delayed.

The number of logic gates required to design asynchronous counters is very small. As a result, their design is straightforward. Asynchronous counters is also termed as the ripple counters.

The number of flip flops used in a ripple counter is determined by the number of counter states (ex: Mod 4, Mod 2 etc). The number of counter output states is referred to as the "Modulus" or "MOD" of the counter. A counter can have a maximum of 2n states, where n represents the number of flip flops used in the counter.

To know more about Asynchronous Counter, visit: https://brainly.com/question/29649160

#SPJ4

The size overcurrent protective device that should be selected in this case is 50A.

An overcurrent protective device may be characterized as a piece of electrical equipment that is used to protect service, feeder, and branch circuits and equipment. These devices include circuit breakers and fuses.

According to the context of this question, overcurrent protection devices are to be sized no less than 125% of the continuous load, plus 100% of the noncontinuous load. But in this question, only 50 A of OCPD is used for nonmotor loads feeds a continuous load rated at 20A and a noncontinuous load at 25A.

Therefore, the size overcurrent protective device that should be selected in this case is 50A.

To learn more about Overcurrent protective device, refer to the link:

https://brainly.com/question/28275759

#SPJ1

In areas where compaction is required, there must be at least 1' above the pipe before compaction with mechanical means.

Compaction refers to the mechanism which expels entrapped air from freshly placed concrete and packs together the aggregate particles so as to maximize the density of concrete. Compaction significantly increases the ultimate strength of concrete and enhances the bonding with reinforcement. In simple terms, compaction occurs when particles are pressed together in order to reduce the space between them. In areas where compaction is needed, it is kept into consideration that there must be at least 1' above the pipe before compaction is performed.

You can learn more about concrete at

https://brainly.com/question/25500184

#SPJ4

A distribution panel's breakers are unaffected by the sun beaming on it. The assumption is incorrect.

An assumption is really something you believe to be true despite the lack of evidence. People could presume, for instance, that you are a nerd if we wear spectacles, even when it is untrue.

Assumptions are untested beliefs that we have without even recognizing them. Our judgments, also known as inferences, are frequently founded on uncritically held presumptions. But a critical thinker is aware of these presumptions since they might occasionally be wrong or misinformed.

To know more about Assumptions visit :

https://brainly.com/question/17041979

#SPJ1

The both technician is correct for their statement about fuse links.

Fuse links is safety device for mechanical or electrical uses. The mechanical fuse link will have safety mechanism to fire sprinkler, and for electrical fuse link will have safety mechanism to break a circuit if have electrical failure.

The fuse links usually made up of wire that attached to two terminal or in this case to larger diameter conductors.

The maxi fuse currently is commonly used than fusible links especially in vehicle circuits because it offers protection from high amperage.

Learn more about fuse links here:

brainly.com/question/15409880

#SPJ4

There is almost no wind at the equator and at 30 degrees north latitude, but a dependable northeasterly wind in between because the two hemispheres have opposite rotations.

What is latitude?

The north-south location of a point on the surface of the Earth or another celestial body is indicated by the latitude coordinate in geography. Latitude is expressed as an angle with a range of -90° at the south pole, 90° at the north pole, and 0° at the equator. The latitude scale counts the miles north or south of the equator. The imaginary lines that divide the Earth are known as parallels or lines of latitude.

Although they run east to west, they gauge your distance in either the north or south. Longitudes and latitudes are similar in that they are both measured in degrees, minutes, and seconds, where one degree equals 60 minutes and one minute equals 60 seconds.

To learn more about latitude, use the link given
https://brainly.com/question/14674354
#SPJ4

The correct answer is A dynamic analysis is necessary if the force P acting on the structure varies so quickly that the inertial and damping forces significantly alter the equation of equilibrium.

Dynamic analysis is the process of evaluating and testing a programme utilising real-time data execution. The objective is to find bugs in a software when it is being used, as opposed to continually analysing the code offline. Structural dynamics is a type of structural study that looks at how a structure reacts to dynamic (high-acceleration) loads. Traffic, earthquakes, explosions, wind, waves, and people are all examples of dynamic loads. Any structure may be subjected to dynamic loading. The tasks that make up dynamic testing methodologies in the STLC include requirements analysis for the tests, test planning, test case design and implementation, test environment setup, test case execution, issue reporting, and test closure.

To learn more about dynamic analysis click the link below:

brainly.com/question/28486515

#SPJ4

The total deflection at the mid point b is B = 1.78786mm

How to calculate total deflection ?

M(x) divided by EI (Young's Modulus x Moment of Inertia) is the double integral of the Bending Moment Equation, which can be used to calculate deflection. where E is the young's modulous and I is the moment of inertia

M(x)/E * I

Beam deflection means the state of deformation of a beam from its original shape under the work of a force or load or weight. One of the most important applications of beam deflection is to obtain equations with which we can determine the accurate values of beam deflections in many practical cases.

Thus the total deflection is 1.78786mm

To know more on deflections follow this link:

https://brainly.com/question/1581319

#SPJ4

Conduction is the transfer of heat through a solid material. Convection is the transfer of heat by moving air. Radiation is the transfer of heat in the form of electromagnetic waves.

Conduction is a process in which heat is transported between parts of a continuum, by direct physical contact. Convection is the principle by which heat is transferred by electric currents in a liquid, i.e. liquid or gas. Radiation is a heat transfer mechanism, where the conversion takes place through electromagnetic waves.

Electrical conduction usually occurs in solids by molecular collisions. Convection occurs in liquids due to mass motion of molecules in the same direction. In contrast, radiation occurs in the vacuum of space and does not heat the intermediate medium.

Learn more about conduction, convection, and radiation https://brainly.com/question/893656

#SPJ4

We are going to solve this question with the help of "Toll Bridge Puzzle" using strategies based on place value and properties of operations.

The image below depicts bridges connecting islands. You must pay a toll in coins to cross a bridge. How can you get to the island marked in red if you start on the island marked in blue with 100 coins?

Step-By-Step Explanation:

This task is designed to assess the addition of four numbers as specified in the standard while remaining in a problem-solving context.

This task is intended to be instructional; however, due to the random nature of when the correct route is discovered, it is not suitable for assessment.

This puzzle works well as a physical re-enactment, with paper plates representing the islands and strings with papers attached representing the tolls.

The single digit numbers will often lead students to believe that the route must pass that way. They may also miss the "crossover" by using the central island, finding the 23 + 25 + 29 + 24 route but not the 32 + 15 + 40 + 38 route or the 32 + 15 + 29 + 24 route.

Technically, paths that run from right to left along some bridges (for example, 32 + 5 + 41 + 40 + 29 + 24) could also be considered. In this case, however, such paths can be ignored because students will find a cheap enough path by only investigating paths that run from left to right. One might be tempted to modify the problem by having the student start with 99 coins and ask if reaching the red island is possible. Such a change, however, would be inappropriate because a mathematically valid solution would require the student to consider all paths, including those that cross some bridges from right to left.

Solution:

32 + 15 + 29 + 24 = 100

Other possible routes:

23 + 51 + 3 + 24 = 101

23 + 25 + 29 + 24 = 101

23 + 25 + 40 + 38 = 126

32 + 15 + 40 + 38 = 116

32 + 5 + 41 + 38 = 116

To know more about properties of operations, visit: https://brainly.com/question/15143062\

#SPJ4

The correct answer is  int k = 0; while (k <nums. length) nunstk) - nuns [k] nuns [k]; II. an integer array, nums, which has been declared and initialized with one or more integer values.

Integer baz [5] = ; By doing this, an array of five int values is created, each initialised to zero: However, when an array is defined, its elements can be explicitly initialised to certain values by surrounding those initial values in brackets. An array is a group of related data pieces kept in close proximity to one another in memory. The sole way to retrieve each data piece directly is by using its index number, making it the most basic data structure. The array is given a name and the members' types are described in a "array declaration." It may also provide the array's element count. A pointer to the type of the array items is regarded to be a variable of array type.

To learn more about integer click the link below:

brainly.com/question/15276410

#SPJ4

The operating range of a straightforward perfect Rankine cycle using water as the working fluid is between 3 MPa in the boiler and 30 kPa in the condenser. If the quality at the turbine's exit cannot be lower than 80%.

What is  Rankine cycle?

The efficiency of the Rankine cycle is reported to range from 35 to 45% when it is actually operating. 10. The Boiler is operated at 3 MPa with a 350°C outlet temperature under a straightforward Rankine cycle, while the Condenser is operated at 50 kPa.

The mechanism by which some heat engines, such as steam turbines or reciprocating steam engines, permit mechanical work to be extracted from a fluid as it flows between a heat source and a heat sink is described by the Rankine cycle, an idealized thermodynamic cycle for a particular operating pressure.

To learn more about Rankine cycle from given link

brainly.com/question/16836203

#SPJ4

False. Ion channels are usually closed and only open when stimulated by a signal such as a change in voltage or a chemical messenger.

Ion channels play a critical role in controlling plasma membrane permeability.

Ion channels are transmembrane proteins that open and close to control the entry and exit of ions across the plasma membrane. These channels open when they receive an external signal, such as a change in voltage or a chemical messenger.

Ion channels allow selective passage of ions across the plasma membrane. This means that some types of ions can pass through the membrane while others cannot. This selectivity allows the cell to control the exchange of ions with the external environment. Ion channels are also responsible for the conduction of ions across the plasma membrane, which allows cells to transmit signals across the plasma membrane.

Learn more about Ion channels in the plasma membrane:

https://brainly.com/question/28543916

#SPJ4

The only dominant strategy in this game is for Alyssa to choose left The outcome reflecting the unique Nash equilibrium in this game is as follows: Larry chooses  right and Megan chooses Left

In game theory, the phrase "dominant strategy" refers to the choice that is best for a player regardless of the actions taken by their opponents, whereas the phrase "inferior strategy" designates the alternative.

Since Megan selecting "Left" is the sole effective technique in this game. It implies that she will always adopt a "left" tactic, regardless of Larry's decision.

Therefore, the result of the game, which reflects the particular Nash equilibrium, is as follows: Megan picks "Left," whereas Larry chooses "Right". One-of-a-kind Nash equilibrium is (Right, Left).

Learn more about dominant strategy from

https://brainly.com/question/14056827
#SPJ1

The ratio of the input voltage to the output voltage is known as the small signal voltage gain (Av): The tiny signal output current, io in the collector or drain, is equal to the input voltage V in (vbe for the BJT and vgs for the MOS) multiplied by the transconductance g m.

At each step of the VGS increase, record the drain current (ID). Divide the slight changes in the current ID by the small changes in VGS to obtain the transconductance (gm). A tiny signal is an AC signal that is overlaid on a bias signal (more precisely, a signal with zero average value) (or superimposed on a DC constant signal). This splitting of a signal into two halves enables the use of superposition to streamline subsequent analysis.This transconductance connects the output current to the transistor gain represented by the input voltage. Therefore, with a constant value of VDS, the formula for the slope of the transconductance curve is given as gm = ID/VGS.

To learn more about voltage click the link below:

brainly.com/question/29445057

#SPJ4

The voltage function v ( t ) is initially expressed in terms of sine, while the current function I ( t ) is initially expressed.

Phase shift is the term used to describe the different positions of two sinusoidal waveforms at a specific time moment. By determining the relationship between the current and voltage waveforms of the specific circuit, the phase shift is utilized to assess the functions of the circuit.

One millionth of a second is equal to one microsecond in the International function of Units. When Unicode is unavailable, we may be given a reduced version of its symbol, which is s. One thousandth of a millisecond, or 1000 nanoseconds, is a microsecond.

A microsecond is one millionth (10 -6) of a second (us or Greek letter mu plus s). As a point of reference, a millisecond (ms or msec) is one thousandth of a second and is frequently used to gauge how quickly data is read from or written to a hard drive, a CD-ROM player, or transferred over the Internet.

Know more about hard drive here:

https://brainly.com/question/10677358

#SPJ4

There is an even better approximation algorithm, a so-called PTAS1.

we are given m machines, and 2m+ 1 jobs. There are three jobs with processing time m, and

2 jobs with processing times m + 1, m + 2, . . . , 2m − 1 each. In case of LPT, all but one of the machines

get two jobs with a total processing time of 3m − 1, and a single machine gets three jobs with a total

of 4m − 1 processing time. Thus, the makespan is 4m − 1. OPT schedules the three m jobs on a single

machine, and the remaining jobs on the remaining m−1 machines, such that each of those machines get

with the exception of one machine receiving three jobs with a total processing time of 4m 1.

the approximation ratio approaches 4/3.

There is an even better approximation algorithm, a so-called PTAS1

for this problem, but it is not

covered by this lecture.

To learn more about algorithm refer to:

https://brainly.com/question/24953880

#SPJ4

The kind of thread that should be used in a machine part to a heavy cast iron housing is a national fine thread. The correct option is a.

The root and tips of NF and NF threads differ slightly from one another. It does imply that there are some limitations on thread interchangeability. The pitch of the fine thread is smaller.

There are three classes of unified threads: For applications where a liberal tolerance is necessary to allow for simple assembly even with slightly damaged threads, use 1A (external) and 1B (internal).

Therefore, the correct option is a, national fine.

To learn more about UNF fine thread, refer to the link:

https://brainly.com/question/29708465

#SPJ1

The control plane is where routing, which determines the path packets go from source to destination, is implemented. In the data plane, forwarding is the process of transporting packets from a router's input to the correct router output.

What is following statements?

In the data plane, forwarding is the process of deciding the path packets will take from source to destination. Moving packets is referred to as routing. While routing is the global action of selecting the source-destination paths traveled by packets, forwarding is the local action of moving arriving packets from the router's input connection to the appropriate router output link.

In contrast to the forwarding table, which contains port information, the routing table contains information on path routing.

To learn more about following statements from given link

brainly.com/question/26105799

#SPJ4

Option C is correct. Swage joints must be used to connect two pieces of copper tubing by soldering or brazing without the use of any fittings.

Swaging is the process of fitting the end of one copper tube over the other so that the junction may be brazed or soldered. It is used to unite two copper tubes of the same diameter.

In order to permanently unite fittings to pipes or cables (also known as wire ropes), swaging is most frequently used. After the parts are loosely assembled, the fitting is compressed and deformed by a mechanical or hydraulic tool.

A swage joints is a wire rope component by definition. By squeezing the fitting on the wire, it is fastened to the wire.

Know more about compressed here:

https://brainly.com/question/14828391

#SPJ4

Data governance involves the staff, procedures, and technologies needed to supervise and protect the data and data properties of an entity.

The phrase "data governance" is used both at the macro and micro levels. The first is a political idea that plays a role in global politics and Internet governance, while the second is a data management idea that plays a role in corporate data governance. Setting internal guidelines—data policies—that control how data is gathered, processed, kept, and disposed of is referred to as data governance. It regulates who has access to what data types and which data types are governed. Data owners, data stewards, and data custodians are often represented on the steering committee of a strong data governance program. In particular, the reference data and master data elements, are governed by policies, processes, and procedures developed by the three positions.

Learn more about Data governance here

https://brainly.com/question/15000727

#SPJ4

The cylinder, motor, or rotary actuator of a fluid power device is supplied with pressurized fluid by a pump.

The cylinder, motor, or rotary actuator of a fluid power device is supplied with pressurized fluid by a pump. Variable flow rates from the pump or through valves inside the fluid power circuit are used to control output speed and direction.

are utilized in a range of applications, including heavy machinery, robotics, and automotive braking systems. Using either hydraulic or pneumatic cylinders, these devices generate linear motion.

When compared to other conventional power-transmission methods, fluid power has the highest power density. Fluid power systems can be divided into two categories: pneumatic and hydraulic. Pneumatic systems employ neutral gases like air, whereas hydraulic systems use liquids like water and oil.

Therefore, the correct answer is option a) Control System.

To learn more about fluid power refer to:

https://brainly.com/question/22590501

#SPJ4

False, There are instances when flashing green lights other than traffic signals are employed to alert drivers of impending stop signs, railroad crossings, signal lights, pedestrian crossings, school zones,

Robots are signalling devices used at road junctions, pedestrian crossings, and other sites to manage traffic flows. Traffic lights, traffic signals, or stoplights are also known as these terms in South Africa.

Traffic lights typically include three signals, which convey important information to cars and cyclists through the use of colours and symbols like arrows and bicycles. The standard traffic light colours are vertically or horizontally organised red, yellow, and green. Although this is a worldwide standard, there are differences in traffic signal legislation and sequences on a national and municipal level.

To lessen the need for police personnel to regulate traffic, the technique was initially used in December 1868 on Parliament Square in London.

Electricity and computerised control have enhanced traffic light technology since then.

Learn more about Lights here:

https://brainly.com/question/14284019

#SPJ4