TCP creates connections with distinct openings and closings.(t/f)

The major worry associated with prolonged, low-level PCB exposure is reproductive problems. However, PCB exposure can also lead to other health concerns such as liver cancer, general tiredness, and loss of appetite.
A major worry associated with prolonged, low-level PCB exposure is:d. reproductive problems

PCBs are known to be persistent organic pollutants (POPs) that can accumulate in the environment and in the food chain, leading to potential exposure through the consumption of contaminated fish, meat, and dairy products. Even at low levels, long-term exposure to PCBs has been associated with a range of health problems, including developmental and cognitive impairments, endocrine disruption, immune system dysfunction, and an increased risk of cancer. Because of these concerns, the production and use of PCBs have been banned in many countries, but PCBs can still be found in some products, and they continue to be a public health concern.

Learn more about  prolonged here

https://brainly.in/question/12965989

#SPJ11

UDP is not considered reliable because it does not provide error-checking or recovery mechanisms. Unlike TCP, which guarantees the delivery of packets and checks for errors, UDP sends packets without checking if they have been received or not.

This lack of reliability makes UDP a suitable protocol for applications that require speed and low latency, such as video streaming and online gaming, where occasional lost or delayed packets are acceptable. However, for applications that require accurate and complete data transmission, such as file transfers and email, TCP is the preferred protocol due to its reliability features.UDP, or User Datagram Protocol, is not considered reliable because it lacks built-in error checking and correction mechanisms. Unlike TCP, which provides guaranteed delivery and proper sequencing of data, UDP simply sends datagrams without verifying whether they reach their intended destination or are received in the correct order. This can result in lost or misordered data, making UDP less reliable for certain applications that require guaranteed delivery and data integrity. However, UDP's simplicity and lower overhead can be advantageous for real-time applications, like video streaming or online gaming, where some data loss is acceptable and maintaining low latency is more important.

Learn more about transmission here

https://brainly.in/question/2716268

#SPJ11

The correct answer is c. A switch. The switches in a computer's circuits are responsible for controlling the flow of electricity and producing the binary code of 0s and 1s, also known as bits, that the computer uses to process and store information.

The electronic device that leads to the representation of 0s and 1s (bits) in a computer is:
c. A switch
Switches, specifically transistors, are used to control the flow of electrical signals, representing binary values (0s and 1s) in a computer.

Binary and change. It is a binary number system: a way of counting. We've all learned to count ten numbers: 0-9. One reason is that we have ten fingers to represent numbers. Computers have switches that represent information, and switches have only two states: ON and OFF.

Binary has two numbers: 0 and 1 - one corresponds to two change states (0 = OFF, 1 = ON). Changes to the way the were modified made computers faster, cheaper, and smaller. Originally, the key was a vacuum cleaner about the size of a human thumb. He invented the transistor in the 1950s (and won a Nobel Prize for its inventor). Allows keyboards to be the size of a human finger. The development of integrated circuits in the 1960s allowed millions of transistors to be built on a single silicon chip – allowing millions of switches to be placed on something the size of a finger.

Learn more about information:

brainly.com/question/31059452

#SPJ11

When the quantum of a process decreases, it means that each process is given less time to execute before the CPU switches to another process. This can lead to an increase in context switches, which can increase the overhead and ultimately increase the wait time for processes.

It can also improve the overall performance of the system by allowing more process decreases to be executed in a given period of time. Therefore, the effect of decreasing quantum on wait time is dependent on the specific system and workload.

After the aluminium beverage cans have been made and consumed once, they can be recycled by remelting the spent metal.

1) The cans are divided into sections to make them more portable and easy to clean

2) The contaminants and hydrogen gas are then eliminated after the cans are blocked and heated.

3) To obtain the proper alloy specification, the composition of the molten aluminium alloy is changed by the addition of the alloy composition.

4) The molten alloy can then be used and processed into solid aluminium items without the need for much further energy.

Processes 1 and 2, which involve adding energy from sources other than the sun, are subject to the second law of thermodynamics.

Learn more about process decreases here

https://brainly.com/question/17099750

#SPJ11

The correct answer is b. Final methods and classes prevent further inheritance.In Java, a class or a method can be declared as final, which means that it cannot be subclassed or overridden by any subclasses. When a class is declared as final.

it cannot be extended by any other class, and when a method is declared as final, it cannot be overridden by any subclass.

Final methods and classes prevent further inheritance because they provide a way to prevent other classes from changing the behavior of the final class or method. This can be useful in cases where the behavior of the class or method is critical and should not be modified by subclasses.

The other options mentioned in the question are not valid reasons for declaring a class or method as final.

a. Final methods allow inlining the code - This is not a valid reason for declaring a method as final. The final keyword is used to prevent the method from being overridden by any subclasses, but it does not necessarily have any impact on the inlining of code.

c. Final methods are static - This is not true. A final method can be either static or non-static, but the final keyword does not make the method static.

d. Final methods can improve performance - This is not necessarily true. While the final keyword can sometimes allow the Java compiler to optimize the code, this is not always the case, and the impact on performance is highly dependent on the specific implementation details of the class or method.

Learn more about inheritance here:

https://brainly.com/question/14930526

#SPJ11

The travel time reaching the max vertical height (H) is half of the total travel time (t) is given as D/4

The maximum vertical height is the highest point reached by an object in the air, measured from ground level.

The max height in physics is affected by the object's velocity, launch angle, and air resistance. It's crucial in sports like basketball and high jump where the goal is to reach the highest possible height.

The image provided shows the flight of the athlete and then finds his vertical height.

Read more about vertical height here:

https://brainly.com/question/27101452
#SPJ1

The number of 30-pin SIMMs installed in one bank can vary from 2 to 8, depending on the size of the individual SIMMs and the configuration of the memory bank.

72-pin SIMMs, the number of 30-pin SIMMs installed in one bank depends on the type of SIMM and the memory controller of the computer.

30-pin SIMMs were used in older computers, such as the first generations of Macintosh computers and some IBM PCs.

SIMMs typically came in sizes of 256KB, 512KB, 1MB, 2MB, 4MB, and 8MB.

A bank of memory using 256KB or 512KB SIMMs would typically have 8 slots, whereas banks of 1MB and 2MB SIMMs would have 4 slots.

Banks using 4MB and 8MB SIMMs would have 2 slots.

It is worth noting that 30-pin SIMMs are no longer commonly used in modern computers.

For similar questions on bank

https://brainly.com/question/14905714

#SPJ11

In Python, the mathematical operator used to raise five to the second power is the double asterisk (**).  Your expression would look like this:5 ** 2`

Python is a high-level, interpreted programming language used for a wide range of applications, including web development, data analysis, artificial intelligence, and scientific computing. It has a simple and concise syntax, making it easy to learn and use, while also providing powerful programming capabilities. Python's standard library includes modules for tasks such as file I/O, regular expressions, and networking, while its extensive third-party library ecosystem offers a wealth of additional functionality. Python is an open-source language, which means that it is free to use, distribute, and modify. Its popularity has grown rapidly in recent years due to its ease of use, versatility, and large and supportive community of developers and users.

Learn more about Python here:

https://brainly.com/question/30365096

#SPJ11

An X-ray machine is installed with a long-time rating based on an operating interval of 517.2 minutes or longer. This means that the X-ray equipment is designed to operate safely and effectively for periods of 517.2 minutes (about 8.6 hours) or longer without experiencing issues related to its performance or safety.

X-rays, or less commonly X-rays, are high-energy electromagnetic radiations. Most X-rays have wavelengths in the 10 picometers to 10-nanometer range and energies in the 145 eV to 145 range, corresponding to frequencies in the 30 petahertz to 30 Ahtz (3 × 1016 Hz to 3 × 1019 Hz) range. house. Kev. X-rays have shorter wavelengths than ultraviolet rays and generally longer wavelengths than gamma rays. X-rays are called X-ray radiation in many languages ​​and are named after German scientist Wilhelm Conrad Röntgen, who discovered it on November 8, 1895. Send out an unknown type of radiation is called an X-ray. The English X-ray notation includes the lines x-ray(s), xray(s), and X-ray(s).

X-rays are also used to detect broken bones, diagnose certain diseases, "show certain metals" and find weak spots in metals, etc. using for. An X-ray machine is installed with a long-time rating based on an operating interval of 517.2 minutes or longer. This means that the X-ray equipment is designed to operate safely and effectively for periods of 517.2 minutes (about 8.6 hours) or longer without experiencing issues related to its performance or safety.

Learn more about installed:

brainly.com/question/13267432

#SPJ11

The tolerance for the asphalt spread rate target can be calculated using the following formula.

Tolerance = (Target Spread Rate x Tolerance Percentage)/100 Target Spread Rate is the desired spread rate for the asphalt

Tolerance Percentage is the allowable deviation from the target spread rate, expressed as a percentage

For example, if the target spread rate is 2.5 inches per square yard and the allowable deviation is ±5%, the tolerance for the spread rate would be: Tolerance = (2.5 x 5)/100

Tolerance = 0.125 inches per square yard Therefore, the acceptable range for the spread rate would be between 2.375 inches per square yard (2.5 - 0.125) and 2.625 inches per square yard (2.5 + 0.125).

Learn more about asphalt spread here:

https://brainly.com/question/29589497

#SPJ11

The Physical Security Officer/Provost Marshal is the entity responsible for ensuring the proper identifier and legal incorporation of security considerations.

The entity responsible for ensuring the proper identifier and legal incorporation of security considerations is the Security Enforcement entity, which may include Law Enforcement Officials, the Physical Security Officer/Provost Marshal, the Installation Commander/Facility Director, or the Operations Security Officer. Legal Officers may also provide guidance on the legal aspects of security enforcement. They work closely with law enforcement, operations, and other security-related personnel to maintain the safety and integrity of facilities and installations.
Their responsibilities include the installation, use, and maintenance of security equipment, from metal detectors to electronic monitoring. They may also interact with guests and staff for security reasons. Responsibilities include accessing guest and electronic information and overseeing all security.

Learn more about Identifier:

https://brainly.com/question/31494133

#SPJ11

As the question suggests, the group of IPv6 addresses that cannot be allocated as a host source address are the multicast addresses. Multicast addresses are reserved for communication to multiple hosts simultaneously and cannot be used as a source address for a single host.

The group of IPv6 addresses that cannot be allocated as a host source address is the "Multicast" addresses.

In IPv6, multicast addresses have a prefix of "FF00::/8".

These addresses are used to send packets to multiple hosts simultaneously, rather than a single host, and therefore cannot be used as a source address for a specific host.

Learn more about communication at : brainly.com/question/22558440

#SPJ11

A DDR3 DIMM has 240 pins, while a DDR2 DIMM also has 240 pins. Although both have the same number of pins, they are not interchangeable due to differences in their notch positions and voltage requirements.

A DDR3 DIMM (Double Data Rate 3 Dual Inline Memory Module) has 240 pins, while a DDR2 DIMM (Double Data Rate 2 Dual Inline Memory Module) has 240 pins as well. The number of pins on a DIMM (Dual Inline Memory Module) is an important specification that determines its compatibility with the motherboard. The pins on a DIMM are used to connect the module to the memory controller on the motherboard, which enables the transfer of data between the processor and the memory. DDR2 and DDR3 are different generations of DDR SDRAM (Double Data Rate Synchronous Dynamic Random Access Memory), which have different operating frequencies and timings. However, they have the same number of pins, which allows for backward compatibility, meaning that a DDR3 DIMM can be installed in a motherboard that supports DDR2 memory, but not the other way around.

Learn more about voltage here-

https://brainly.com/question/29445057

#SPJ11

The main answer is "an unacceptable location."  According to electrical safety standards, a masonry wall opposite the front of a 480 volt switchboard is considered to be an unacceptable location.

because it can obstruct access to the switchboard and prevent safe operation and maintenance. The National Electrical Code (NEC) requires a minimum working space in front of electrical equipment, and this space must be kept clear and unobstructed. A masonry wall can also create a hazard by reflecting electrical arcs and increasing the risk of electric shock and fire. Therefore, it is important to ensure that the area in front of switchboards and other electrical equipment is free from obstructions and complies with safety regulations.

Learn more about electrical equipment here:

https://brainly.com/question/31256244

#SPJ11

During an annual cleaning of an outdoor condensing unit,, bent fins should be straightened out to ensure proper airflow and maximum efficiency.

The condensing unit is an essential part of any air conditioning or refrigeration system, and it works by transferring heat from the indoor air to the outside environment. The fins in the unit play a crucial role in this process by helping to dissipate the heat absorbed by the refrigerant.

Over time, the fins may become bent or damaged due to various reasons such as weather conditions, debris accumulation, or accidental damage.

When fins are bent, the airflow through the condenser coil can be restricted, causing the unit to work harder and less efficiently, leading to higher energy costs and potential damage to the system.

Straightening the bent fins during the annual cleaning process is a relatively simple and inexpensive maintenance task that can have a significant impact on the performance of the system.

It involves using a fin comb or a similar tool to gently straighten the fins back to their original position. This process allows air to flow more freely through the coil, reducing the workload of the compressor and improving the overall efficiency of the system.

In conclusion, during an annual cleaning of an outdoor condensing unit, straightening the bent fins is an essential task that should not be overlooked.

It is a simple and cost-effective way to maintain the efficiency of the system and ensure its longevity, ultimately saving you time and money in the long run.

For more question on "Outdoor Condensing Unit" :

https://brainly.com/question/26261685

#SPJ11

To maintain altitude while decreasing airspeed, the angle of attack of the airplane's wings must be increased to produce more lift than drag. This means that Option A, "Increase the angle of attack to produce more lift than drag," is the correct choice.

By increasing the angle of attack, the wings generate more lift, which counteracts the decrease in airspeed and allows the airplane to maintain its altitude.

Option B, "Increase the angle of attack to compensate for the decreasing lift," is incorrect because the angle of attack must be increased to produce more lift, not simply to compensate for the decreasing lift.

Option C, "Decrease the angle of attack to compensate for the increasing drag," is also incorrect because decreasing the angle of attack would reduce lift, making it more difficult to maintain altitude.

Option A is answer.

You can learn more about angle of attack at

https://brainly.com/question/30746770

#SPJ11

The process of using existing classified information to create new material while maintaining the original classification markings is known as derivative classification.

This process involves taking information that has already been classified and using it to create new documents or materials.

The new material must be marked with the same level of classification as the original source information, as well as any additional markings necessary to reflect the content of the new material.
Derivative classification is an important process in maintaining the confidentiality of classified information.

By using existing classified information to create new materials, the risk of exposing sensitive information is reduced.

It also allows for more efficient use of classified information, as it can be used to create multiple documents without the need for additional classification reviews.
It is important to note that derivative classification should only be done by authorized personnel who have been trained in the proper handling of classified information.

Improper handling of classified information can result in severe consequences, including legal action and loss of security clearances.
Derivative classification is the process of using existing classified information to create new materials while maintaining the original classification markings.

It is an important tool for maintaining the confidentiality of classified information but must be done by authorized personnel who have been properly trained in handling classified information.

For similar questions on material

https://brainly.com/question/17546069

#SPJ11

Frames of switchgear and control assemblies shall be suitable for the content loaded within them. According to NEC 490.36, the frames must be able to withstand the weight and distribution of the equipment and components installed within the assemblies.

Properly designed and constructed frames are essential for the safe and reliable operation of switchgear and control assemblies. The frames must be able to protect the equipment from damage, provide adequate support, and allow for proper ventilation. As such, manufacturers of switchgear and control assemblies should pay close attention to the design and construction of the frames to ensure compliance with NEC 490.36 and the safety of the equipment. Frames of switchgear and control assemblies shall be content loaded.

Learn more about switchgear here: brainly.com/question/30745390

#SPJ11

The given statement "A timer delay time equals the value in the ACC multiplied by the time base " is true.

In many electronic systems, timer circuits are used to generate accurate delays. These circuits consist of a counter and a clock source, and the delay time is determined by the count value of the counter and the frequency of the clock. In some cases, the delay time is set by an external signal, while in others, it is determined by the value of a register in the system.

In the case of a timer delay time equaling the value in the ACC (accumulator) multiplied by the time base, this means that the delay time is directly proportional to the value stored in the ACC and the time base. The ACC is a register in the system that stores data temporarily for processing, and the time base is the frequency of the clock used by the timer circuit.

Thus, if the value of the ACC is increased, the delay time will also increase proportionally. Similarly, if the time base frequency is increased, the delay time will decrease proportionally. This relationship is essential in designing and programming accurate timing circuits in electronic systems.

You can learn more about electronic systems at: brainly.com/question/28166552

#SPJ11

The drag at the point where the aircraft just lands on the ground is approximately 66987 N.

Drag = [tex]\frac{1}{2}*density*velocity^{2} *coefficient of drag*wing area[/tex]

where:

density = atmospheric density at the landing altitude

velocity = landing speed of the aircraft in meters/second

Convert the landing speed from miles per hour to meters per second:

196.4 mi/hr = (196.4*1609.34 m) / (3600 s) = 87.8 m/s

Calculate the atmospheric density at the landing altitude using the following formula:

density = [tex]\frac{pressure}{specific gas constant * temperature}[/tex]

where:

specific gas constant for dry air = 287.058 J/(kg*K)

temperature = standard temperature at sea level - temperature lapse rate * altitude

Assuming a temperature lapse rate of 0.0065 K/m and a standard temperature at sea level of 288.15 K, we can calculate the temperature at the landing altitude as follows:

temperature = 288.15 K - 0.0065 K/m * 668 m = 283.7 K

Substituting these values into the density formula, we get:

density = 98.8 kPa / (287.058 J/(kg*K) * 283.7 K) = 1.036 kg/m³

Finally, we can calculate the drag using the drag formula:

Drag = (1/2) * 1.036 kg/m³ * (87.8 m/s)² * 0.034 * 429.1 m² = 66987 N

Learn more about drag force here:

https://brainly.com/question/27817330

#SPJ4

(250-164(A)) DC systems to be grounded and supplied from an off premises source shall have the grounding connection made at the point where the grounded conductor is brought into the building or structure.

This helps to ensure proper grounding of the DC system and prevent electrical hazards.
Hi! According to NEC 250-164(A), DC systems to be grounded and supplied from an off-premises source shall have the grounding connection made at the supply source.

In electrical engineering, the National Electrical Code (NEC) is a set of standards for the safe installation of electrical wiring and equipment. The NEC Article 250-164(A) specifies the requirements for grounding DC systems supplied from an off-premises source.

According to NEC Article 250-164(A), the grounding connection for DC systems to be grounded and supplied from an off-premises source should be made at the source end of the grounded conductor. This means that the grounding connection should be made at the point where the negative or grounded conductor of the DC system is connected to the off-premises power source.

It's important to follow NEC guidelines to ensure the safe and proper installation of electrical systems.

Learn more about grounded and supplied here;

https://brainly.com/question/29526459

#SPJ11

The length of the suitable coat and cable assembly approved for extra hard usage for branches from busways for the connection of equipment shall not exceed 6 feet. This is according to NEC section 368.17(b)(7).

Based on the National Electrical Code (NEC) section 368.17(B)(7), the length of the suitable coat and cable assemblies approved for extra hard usage for branches from busways for the connection of equipment shall not exceed 6 feet.

A wiring is a group of wires arranged in a unit for a specific purpose. Cable assemblies are also called wiring harnesses or plumbing. These cables are bundled together in length and direction to make installation easier and faster. A cable assembly is a group of wires or cables connected to a unit. The purpose of this product is to provide power from many different cables while arranging them in a package that is easy to install, replace and manage.

Learn more about cable assembly:

brainly.com/question/30831285

#SPJ11

Some examples include a clock divider using an 8-bit up-counter with additional logic pulsing every 38 nanoseconds, a clock divider using a 24-bit down-counter with load input pulsing every 540 microseconds.

The given paragraph describes three clock divider circuits used to generate clock signals with different frequencies. A clock divider is a digital circuit that reduces the frequency of an input clock signal to a lower frequency output clock signal.

The first circuit uses an 8-bit up-counter and additional logic to divide the clock pulse every 38 nanoseconds. The up-counter counts up from 0 to 255 and then resets to 0, generating an output pulse for every 256 input pulses. The additional logic is used to adjust the output frequency to the desired frequency of 1 pulse every 38 nanoseconds.

The second circuit uses a 24-bit down-counter with a load input to divide the clock pulse every 540 microseconds. The down-counter counts down from a preset value of 2^24-1 to 0, generating an output pulse when the counter reaches 0. The load input is used to preset the counter with the desired value to achieve the output frequency of 1 pulse every 540 microseconds.

The third circuit uses a 32-bit up-counter with a load input and no additional logic to divide the clock pulse every 1 millisecond. The up-counter counts up from 0 to 2^32-1 and then resets to 0, generating an output pulse for every 2^32 input pulses. The load input is used to preset the counter with the desired value to achieve the output frequency of 1 pulse every 1 millisecond.

Learn more about clock

brainly.com/question/30436581

#SPJ11

A shoulder less than 5 ft with FC-5 pavement cannot have rumble strips.

According to the AASHTO (American Association of State Highway and Transportation Officials) Green Book, for a roadway with FC-5 pavement and a shoulder less than 5 ft wide, rumble strips are not recommended. Rumble strips are used to alert drivers when they are veering off the road or approaching a hazardous area. However, on narrow shoulders, rumble strips can be a hazard themselves, causing drivers to swerve or lose control. Therefore, for safety reasons, rumble strips are not recommended on narrow shoulders with FC-5 pavement.

Learn more about AASHTO here:

https://brainly.com/question/29080719

#SPJ11

Ethernet is a widely used networking protocol that provides reliable data transmission. Although Ethernet does error detection, it does not offer error correction. This means that when errors are detected in data packets, Ethernet discards them rather than attempting to correct them. This may raise concerns about the reliability of the Ethernet protocol.

For such more question on protocol

https://brainly.com/question/28811877

#SPJ11

The collections framework algorithms are implementation-agnostic, i.e., each of these algorithms can operate on objects that offer given interfaces without concern to the underlying implementations.

This allows for flexibility and adaptability when working with different types of collections. The collections framework algorithms are interface-based, i.e., each of these algorithms can operate on objects that offer given interfaces without concern to the underlying implementations. This means that the algorithms are designed to work with any class that implements the required interface, regardless of how the class is implemented internally. This allows for greater flexibility and reusability of code within the collections framework.

Learn More about framework here :-

https://brainly.com/question/28991812

#SPJ11

The statement "dry foam extraction cleaning is ideal for deeply imbedded carpet soil" is false.

Dry foam extraction cleaning is a low-moisture method of carpet cleaning where a machine is used to generate foam from a carpet cleaning solution. The foam is then spread over the carpet and worked into the fibers with a brush. The foam is then allowed to dry, and the dried foam and soil particles are then vacuumed away.

While dry foam extraction cleaning can be effective for removing surface soil and stains, it may not be the best method for deeply embedded soil. This is because the foam is not able to penetrate as deeply into the carpet fibers as other cleaning methods, such as hot water extraction. Hot water extraction uses high-pressure water and cleaning solution to penetrate deep into the carpet fibers and remove soil and other contaminants.

To know more about dry foam extraction,

https://brainly.com/question/30902399

#SPJ11

The overhead service conductors refer to the wires that are responsible for carrying electrical power from the last pole or aerial support to the building or other structure. These conductors include all the components, including any splices that are used to connect the service-entrance conductors at the building or other structure.

Overall, the structure of these  service conductors is an essential aspect of ensuring that electrical service is safely and reliably delivered to homes and businesses.

Overhead support The conductors are those that run from the service point to the building's or other structure's first point of connection to the service-entrance conductors.

A substance or material that allows the passage of power is known as an electric conductor. When voltage is applied, electric charge carriers—typically electrons or ions—move without difficulty from one atom to the next in a conductor.

Conductors are the substances or materials that let energy pass through them. Additionally, conductors allow heat to pass through them. Metals, the human body, the Earth, and animals are some examples of conductors. The body is a powerful conductor.

Learn more about service conductors here

https://brainly.com/question/28298618

#SPJ11

A high-speed Internet has a set of access points called POPS that provide point-of-presence at various speeds, including gigabit and megabit speeds.

These days, home internet service is showing up with ridiculously fast internet speed. Across the US, high-speed internet providers have introduced multi-gigabit plans advertising fast speeds of 2,000Mbps, 5,000Mbps or higher, with the fastest internet providers promising even faster speeds in the works. These high-speed plans can get expensive, however, and are likely way more speed than the average household actually needs.

Most cable internet and fiber-optic providers also offer plans that, while slower speeds than the ultrafast multi-gigabit plans, are more practical and affordable while still delivering plenty of speed. In fact, the speed test data for most of these might surprise you. But it's important to note that not all high-speed ISPs are the same, since whether you want to stream, surf or do a little online gaming, a high speed internet connection is essential. Largely, though, you'll find that zip code, and hardware and software limitations are the factors that are most likely to restrict high-speed internet plan options and performance. That said, here are my picks for the best high-speed internet providers.

learn more about high-speed Internet  here:

https://brainly.com/question/8152317

#SPJ11

Where the above conditions are given:

A)  we can calculate this probability to be approximately 0.1665 or 16.65%.
B) we can calculate this probability to be approximately 0.1612 or 16.12%.

a) Let X be the number of water line breaks in a stretch of 100kks in Gqeberha in a year. We know that X follows a Poisson distribution with λ = 30. To find the probability of 35 or more breaks, we can use the Poisson distribution formula:

P(X ≥ 35) = 1 - P(X < 35) = 1 - Σi=0^34 e^(-30) * 30^i / i!

Using a calculator or software, we can calculate this probability to be approximately 0.1665 or 16.65%.

b) Let Y be the number of water line breaks in a stretch of 100kks outside of Gqeberha in a year. We know that Y follows a Poisson distribution with λ = 15. To find the probability of 12 or fewer breaks, we can again use the Poisson distribution formula:

P(Y ≤ 12) = Σi=0^12 e^(-15) * 15^i / i!

Using a calculator or software, we can calculate this probability to be approximately 0.1612 or 16.12%.

Learn more about probability at:

https://brainly.com/question/30034780

#SPJ1

Full Question:

Although part of your question is missing, you might be referring to this full question:

In Older Cities Across South Africa, Infrastructure Is Deteriorating, Including Water Lines That Supply Homes And Businesses. A Report To The Gqeberha Municipal Council Stated That There Are On Average 30 Water Line Breaks Per 100 ’ A Year In The City. Outside Gqeberha, The Number Of Breaks Is 15/ A Year. A) Find The Probability That In A

In older cities across South Africa, infrastructure is deteriorating, including water lines that supply homes and businesses. A report to the Gqeberha municipal council stated that there are on average 30 water line breaks per 100 ’ a year in the city. Outside Gqeberha, the number of breaks is 15/ a year.

a) Find the probability that in a stretch 100 ’ in Gqeberha there will be 35 or more breaks next year. (3)

b) Find the probability that there will be 12 or fewer breaks in a stretch of 100 ′ outside of Gqeberha next year.