To determine the size of the conductor required to feed a 16 ampere load with a 20-ampere overcurrent protection device, we need to use the National Electric Code (NEC) ampacity tables.
For conductors in an ambient temperature of 100°F, we need to use the 90°C column of the tables. Based on NEC Table 310.16, a 14 AWG copper conductor can handle up to 20 amperes at 90°C. Therefore, a 14 AWG copper conductor would be sufficient to feed the 16 ampere load and protect the circuit with a 20-ampere overcurrent protection device.
Learn more about National Electric Code (NEC)
https://brainly.com/question/30757813
#SPJ4
Full Question: What size conductor is required to feed a 16 ampere load when the conductors are in an ambient temperature of 100F? The circuit is protected with a 20-ampere overcurrent protection device.
6. Suppose a certain musical instrument consists of a pipe which is open at one end and closed at the other. Music is produced as sound waves move through the pipe, creating standing wave patterns. The pipe has a length of 80 cm. Suppose you were riding your bike at 18 m/s towards the instrument as the fifth harmonic was being played. What frequency would you hear
I'm happy to help you with this question. To determine the frequency you would hear, we need to take into account the Doppler effect, as well as the frequency of the fifth harmonic for a pipe closed at one end.
First, let's find the frequency of the fifth harmonic. For a pipe closed at one end, only odd harmonics are produced. The formula to find the frequency of the nth harmonic is:
f_n = n * v / 4L
where f_n is the frequency of the nth harmonic, n is the harmonic number, v is the speed of sound (approximately 343 m/s), and L is the length of the pipe.
For the fifth harmonic (n=5) and L=80 cm (0.8 m):
f_5 = 5 * 343 / (4 * 0.8) = 1071.25 Hz
Now, let's use the Doppler effect formula to find the frequency you would hear while approaching the instrument at 18 m/s:
f_observed = f_source * (v_sound + v_observer) / v_sound
where f_observed is the frequency you hear, f_source is the frequency of the source (1071.25 Hz), v_sound is the speed of sound (343 m/s), and v_observer is your speed towards the instrument (18 m/s).f_observed = 1071.25 * (343 + 18) / 343 ≈ 1128.13 Hz
So, you would hear a frequency of approximately 1128.13 Hz while riding your bike towards the instrument playing the fifth harmonic.
To know more about frequency visit:-
https://brainly.com/question/5102661
#SPJ11
two different types of rope with different properties are fused together to make one long rope. when a wave transfers from the first type of rope to the second type of rope, the wavelength becomes one-fourth of what it was before the transfer. what is true about the speed of the wave?
The speed of the wave must increase by a factor of 4 to maintain a constant frequency is true about the speed of the wave.
What is speed of the wave ?
When a wave transfers from one medium to another, its speed changes if the properties of the two media are different.
The equation that relates wavelength, frequency, and speed is:
v = λf
where v is the wave speed, λ is the wavelength, and f is the frequency.
Since the frequency of the wave must remain constant when it passes from one medium to another, and the wavelength changes, the speed of the wave must also change.
In this case, since the wavelength becomes one-fourth of its original length after passing from the first type of rope to the second type of rope, we can say that the speed of the wave must increase by a factor of 4 to maintain a constant frequency.
What is wavelength ?
Wavelength is defined as the distance between two consecutive points in a wave that are in phase, such as the distance between two consecutive crests or troughs. It is usually denoted by the Greek letter lambda (λ) and is measured in units of length, such as meters (m) or nanometers (nm).
To know more about wavelength, visit:
https://brainly.com/question/12924624
#SPJ1
What is defined as the Human Movement System's relative ability to produce, reduce, and dynamically stabilize forces in all three planes of motion
The Human Movement System's relative ability to produce, reduce, and dynamically stabilize forces in all three planes of motion is defined as the system's neuromuscular efficiency. Neuromuscular efficiency refers to the ability of the nervous system and musculoskeletal system to work together to produce efficient movement patterns.
The human body moves in three planes of motion - sagittal (forward and backward), frontal (side-to-side), and transverse (rotational).
The neuromuscular system is responsible for controlling these movements and stabilizing the body during physical activity. Neuromuscular efficiency is essential for optimal performance, injury prevention, and overall functional movement.
The Human Movement System's ability to produce, reduce, and dynamically stabilize forces in all three planes of motion is referred to as neuromuscular efficiency.
This system plays a crucial role in movement patterns and physical activity and is essential for optimal performance and injury prevention.
For more information on planes of motion kindly visit to
https://brainly.com/question/30463256
#SPJ11
Which object would most likely absorb sound?
A. Bare rock
B. Solid floors
C. A blanket
D. A smooth wall
The object that will most likely absorb sound would be a blanket. That is option C
What is a sound energy?A sound energy is the type of energy that travels through vibrations in air and can be heard through human ears or detected using specialised equipments.
The properties of sound energy include the following:
Pitch, Dynamics (loudness or softness),Timbre (tone color), and Duration.Blankets are less solid in nature than rocks,wall and floors in which sound waves can easily bound off from.
Learn more about energy here:
https://brainly.com/question/25959744
#SPJ1
Two charges, -3.3μC and -4.0μC , are located at (-0.70m , 0) and (0.70m , 0), respectively. There is a point on the x-axis between the two charges where the electric field is zero.
Is that point left of the origin, at the origin, or right of the origin?
Since the two charges are symmetrically positioned with regard to the origin and have equal magnitudes but opposite signs, the location where the electric field is zero is at the origin.
Using the formula for the electric field produced by a point charge, we can determine the location on the x-axis where the electric field is zero:
[tex]E = k*q/r^2[/tex]
where r is the distance between the point charge and the location where the electric field is being measured, q is the charge of the point charge, E is the electric field, k is Coulomb's constant, and so on. The total electric field for the two charges in this issue may be determined at any location along the x-axis using the principle of superposition. The electric field vectors produced by the two charges will cancel out at some point along the x-axis because they are symmetrically positioned with respect to the origin and have opposite signs. We may determine the electric field vectors produced by each charge at various locations along the x-axis using the formula for the electric field produced by a point charge. We can determine the overall electric field at each place by combining these vectors together. We may determine the location where the electric field is zero by charting the total electric field as a function of the x-axis position. We discover that in this instance, the two charges produce identical, opposing electric fields that cancel one another out at the origin. Because of this, the origin is where the electric field is zero.
learn more about electric field here:
https://brainly.com/question/15800304
#SPJ11
Give the number of protons (p), neutrons (n), and electrons (e) in one atom of 238U.A) 146 p, 92 n, 92 e D) 146 p, 28 n, 146 eB) 92 p, 92 n, 92 e E) 238 p, 146 n, 238 eC) 92 p, 146 n, 92e
The correct answer is A) 146 p, 92 n, 92 e. This is because the atomic number of uranium (U) is 92, which means it has 92 protons in its nucleus.
The atomic mass of uranium is 238, which means it has a total of 238 particles in its nucleus. To find the number of neutrons, you subtract the atomic number (92) from the atomic mass (238), giving you 146 neutrons. Finally, because the atom is neutral (has no overall charge), it must have the same number of electrons as protons, so there are also 92 electrons in one atom of 238U.
learn more about uranium Refer: https://brainly.com/question/31187694
#SPJ11
Max magnetic flux is B times A and theta equals zero. true or false
True. The statement Max magnetic flux is B times A and theta equals zero is true.
The assertion "Max magnetic flux is B times An and theta rises to nothing" is valid. Attractive motion is the proportion of the attractive field that goes through a given region. It is addressed by the image Φ and is characterized as the result of the attractive field strength (B), the region opposite to the attractive field (A), and the cosine of the point between the attractive field and the surface (θ). At the point when the point θ is zero, the cosine of θ is 1, and subsequently, the result of B and A turns into the greatest attractive transition. Subsequently, the assertion "Max attractive transition is B times An and theta rises to nothing" is valid, and it addresses the improved on variant of the attractive motion condition when the point between the attractive field and the surface is zero.
To learn more about magnetic flux, refer:
https://brainly.com/question/30906066
#SPJ4
Question 80
The term "half-value layer" (HVL) is used to designate the thickness of a particular material that will reduce, by one-half, the intensity of radiation passing through the material. Beta radiation is commonly eliminated by
a. Lead
b. Concrete
c. Glass or plastic
d. aluminum
The term "half-value layer" (HVL) refers to the thickness of a material that reduces the intensity of radiation passing through it by 50%. In the case of beta radiation, it is commonly eliminated by using: d. aluminum.
The term "half-value layer" (HVL) refers to the thickness of a material that will reduce the intensity of radiation passing through it by one-half. Beta radiation is a type of radiation that consists of high-energy electrons or positrons. Beta radiation can be eliminated or absorbed by materials with a high atomic number, such as lead or aluminum. Therefore, the correct answer is d. aluminum. Glass or plastic materials may not be effective at blocking beta radiation due to their low atomic numbers. Concrete can be effective at blocking beta radiation, but it may require a greater thickness compared to lead or aluminum.
Learn more about Concrete here: https://brainly.com/question/28903866
#SPJ11
in the circuit represented below, the switch s, after being open for a long time, is then closed. the figure shows a circuit diagram with a battery on the left side. the positive terminal of the battery is on top and the negative terminal is on the bottom. going clockwise from the positive terminal there is a 6 ohm resistor, then a 4 henry inductor, then an open switch s. the circuit is then completed at the negative terminal of the battery. question what is the current in the circuit after the switch has been closed a long time?
The circuit represented, there is a battery with a positive terminal on top and a negative terminal on the bottom. The components connected in series are a 6-ohm resistor, a 4-henry inductor, and a switch S. After being open for a long time, the switch S is closed.
To find the current in the circuit after the switch has been closed for a long time, we need to consider the behavior of the inductor. When the switch has been closed for a long time, the inductor behaves like a short circuit or a wire with zero resistance as it reaches steady state. The circuit now effectively consists of just the 6-ohm resistor connected across the battery. To find the current, we can use Ohm s law where I is the current, V is the battery voltage, and R is the resistance. Since we know the resistance is 6 ohms and the inductor has become a short circuit, the current can be calculated as Unfortunately, you didn't provide.
learn more about switch here.
https://brainly.com/question/9431503
#SPJ11
A positive metal plate is held near a negative metal plate. In what direction does the electric field between the two plates move?
The electric field between the two plates moves in the direction from the positive metal plate to the negative metal plate.
When a positive metal plate is held near a negative metal plate, the electric field between the two plates moves from the positive plate to the negative plate. Here's a step-by-step explanation:
1. The positive metal plate has an excess of positive charges, while the negative metal plate has an excess of negative charges.
2. Electric field lines are always directed away from positive charges and towards negative charges.
3. Therefore, The direction of the movement of the electric field between the two plates is from the positive metal plate to the negative metal plate.
learn more about electric field Refer: https://brainly.com/question/30544719
#SPJ11
Question 38
Considered by many as the source of greatest public exposure related to nuclear power production is:
a. Power plant emissions
b. Leakage from power plants
c. Uranium mill tailings
d. Radon gas emissions
The correct answer is d. Radon gas emissions. Radon is a radioactive gas that can seep into homes and buildings from the ground and rocks beneath them.
It is a naturally occurring element in uranium deposits and is released during the process of nuclear power production. Radon exposure is a significant concern as it is the second leading cause of lung cancer after smoking. The greatest source of public exposure related to nuclear power production is radiation emitted from power plants. This radiation can come from a variety of sources, including the processing of uranium and plutonium fuel, the operation of reactors, and the disposal of nuclear waste. Nuclear power plants are required to meet strict safety standards and emit only a small amount of radiation into the environment.
To learn more about power plants click here https://brainly.com/question/14314816
#SPJ11
The accumulated count of a CTD countera. increments with each true-to-false transitionb. decrements with each true-to-false transitionC. decrements with each false-to-true transitiond. increments with each false-to-true transition
The accumulated count of a CTU (Count Up) counter is a measure of the number of true-to-false transitions that have occurred. This means that for each true-to-false transition, the count is incremented by one. Therefore, option (a) is the correct answer.
It is important to note that the CTU counter is a type of counter in programmable logic controllers (PLCs) that counts the number of transitions from true to false of its input signal.
When the input signal changes from true to false, the count is incremented by one. The accumulated count can be reset to zero by a reset instruction or by powering off the PLC.
On the other hand, the CTD (Count Down) counter is a type of counter that counts the number of false-to-true transitions of its input signal. In this case, the count is decremented by one for each false-to-true transition.
In summary, the accumulated count of a CTU counter increments with each true-to-false transition, whereas the accumulated count of a CTD counter decrements with each false-to-true transition.
Understanding the difference between these two types of counters is important when designing and programming PLCs for industrial automation applications.
For similar question on accumulated count
https://brainly.com/question/31568302
#SPJ11
A 3.7 kg block is being pulled up a rough incline, where θ= 21° and μk= 0.17, with an acceleration of 0.3 m/s/s. What is the magnitude of the Tension force pulling the block up the incline?
Explanation:
Fn= normal force ( this determines the Ff friction)
Fn = mg cosΘ = 3.7 * 9.81 cos (21 ) = 33.88 N
Ff = 33.88 N * .17 = 5.76 N
Fdp = force downplane = mg sinΦ = 3.7 * 9.81 sin 21 = 13.01 N
Total forces acting down the plane = 13.01 + 5.76 = 18.77 N
T = The force acting up the plane to move and accelerate the block
Then :
F= ma
(T - 18.77 N) = 3.7 kg ( .3 m/s^2 )
T = 19.88 N
As a general rule, water pipes should be separated from sewer pipes by a horizontal distance of?
a) 6 ft.
b) 8 ft.
c) 10 ft.
d) 12 ft.
As a general rule, water pipes should be separated from sewer pipes by a horizontal distance of 10 ft.
Water mains shall be laid at least 10 feet horizontally from any sanitary sewer, or sewer manhole, whenever possible; the distance shall be measured edge-to-edge (pipe wall to pipe wall). The minimum fall for a waste pipe is 1 in 40. The maximum fall is 1 in 110 (apart from vertical pipes but that's a different story). So pipes with a gradient between 1 in 40 and 1 in 110 should have adequate flow to prevent blockages from occurring.In other words, for every 100 feet the pipe travels horizontally, it should drop about half a foot vertically. .
Learn more about gradient here: https://brainly.com/question/13020257
#SPJ11
Faraday's lines of force end on what kind of charges
Faraday's lines of force always end on charges of opposite polarity.
In other words, if a line of force starts on a positive charge, it will always end on a negative charge and vice versa. This is because the lines of force represent the direction in which a positive test charge would move in the presence of an electric field. Since opposite charges attract each other, the lines of force will always end on a charge of opposite polarity to the one they started on. This concept is important in understanding the behavior of electric fields and their interaction with charged particles.
Learn more about Faraday's lines at https://brainly.com/question/17012638
#SPJ11
A space station of 100 m radius completes a revolution every 30 seconds
The astronaut feels an acceleration of 4.37 m/s² while standing on the edge of the space station. The acceleration felt by the astronaut is 2.24 times less than Earth's gravitational acceleration. One revolution should take 20.10 seconds for the astronauts to experience Earth's acceleration due to gravity.
The acceleration an astronaut feels while standing on the edge of the space station can be calculated using the formula a = v²/r, where v is the tangential speed and r is the radius. The tangential speed is the distance traveled per unit time, which is equal to the circumference of the circle (2πr) divided by the time taken for one revolution (30 seconds).
So, v = 2πr/30 = (2π × 100)/30 = 20.94 m/s
Substituting this value in the formula, we get
a = v²/r = (20.94)²/100 = 4.37 m/s²
Therefore, an astronaut on the edge of the space station feels an acceleration of 4.37 m/s².
To find how many times Earth's gravitational acceleration this is, we divide the acceleration due to gravity on Earth (9.81 m/s²) by the acceleration felt by the astronaut on the edge of the space station.
So, the number of times Earth's gravitational acceleration is
9.81/4.37 = 2.24
Therefore, the acceleration felt by the astronaut on the edge of the space station is 2.24 times less than Earth's gravitational acceleration.
If the astronauts are to experience Earth's acceleration due to gravity, then the centripetal acceleration of the space station should be equal to the acceleration due to gravity on Earth.
Using the same formula a = v²/r and substituting a = 9.81 m/s² and r = 100 m, we can solve for the tangential speed
v = √(ar) = √(9.81 × 100) = 31.30 m/s
To find the time taken for one revolution, we use the formula for circumference of the circle
C = 2πr = 2π × 100 = 628.32 m
The time taken for one revolution is equal to the circumference divided by the tangential speed
t = C/v = 628.32/31.30 = 20.10 seconds
Therefore, one revolution of the space station should take approximately 20.10 seconds for the astronauts to experience Earth's acceleration due to gravity.
To know more about acceleration:
https://brainly.com/question/30660316
#SPJ4
--The given question is incomplete, the complete question is given
" A space station of 100m radius completes a revolution every 30 seconds.
A. Find the acceleration an astronaut feels while standing on the edge of this station.
B. How many times earth’s gravitational acceleration is this?
C. How long should one revolution of the space station take if the astronauts are to experience earth’s acceleration due to gravity?"--
When 115 V is applied across a wire of radius 0.30 mm and length 10 m, the magnitude of the current density is 1.4x108 A/m2. Find the resistivity of the wire.
The resistivity of the wire is 2.7 x 10^-8 Ωm.
The resistivity of the wire is found to be 2.7 x 10^-8 Ωm by calculating the current flowing through it using the current density equation, multiplying the current density of 1.4x10^8 A/m^2 by the cross-sectional area of the wire, calculating the resistance of the wire using Ohm's law, and calculating the resistivity of the wire using the equation ρ = RA/L, where R is the resistance, A is the cross-sectional area of the wire, and L is its length, and substituting the values we have calculated.
To learn more about resistivity, click here:
https://brainly.com/question/29427458
#SPJ11
A student cut the two colored spots that she observed on the strip of filter paper that had the green ink spot.she placed the two cut-out spots into two wells to the microplate. She then added an equal amount of ethanol and distilled water to each well.she noticied that the solutions in the wells became colored. she repeated the chromatography experiment, Spotting each solution on a different strip of filter paper. Predict what she will see on the strips of filter paper after the experiment. explain your prediction.
According to the described experimental process, the student most likely carried out a type of paper chromatography. On the filter paper, the initial green ink stain was divided into two coloured spots, each of which was then put into a different well of a microplate.
The coloured specks were probably dissolved by the student's addition of equal parts ethanol and distilled water to each well, creating two distinct solutions.
The patterns that are produced when the student conducts the chromatography experiment again by spotting each solution onto various strips of filter paper will vary depending on the chemical composition of the original ink, the characteristics of the solvents employed, and the precise ink components that were separated during the initial chromatography.
The learner is likely to see many bands or spots on the ensuing chromatograms because the initial green ink spot led to two distinct coloured spots. The various pigments may have been separated during the initial chromatography if the original green ink was a blend of several colours, and they may show up as distinct bands on the new filter paper. Because different solvents have varying polarity and may separate the pigments in different ways, the precise colours and locations of these bands may vary depending on the particular solvents employed in the experiment.
It's also possible that the coloured dots in the microplate wells were caused by further ink component separation or reactivity.
Depending on the type of alterations that took place in this scenario, the final chromatograms may display different patterns or colours than the original chromatogram.
Overall, the precise patterns and hues seen in the new chromatograms will rely on a variety of variables and cannot be foreseen with precision without more data from the experiment.
learn more about chromatography here
https://brainly.com/question/1394204
#SPJ1
What is the volume, in cubic centimeters, of a brick that is 4.0 in × 2.7 in × 8.0 in?A) 5.3 cm3 B) 53 cm3 C) 87 cm3 D) 4.8 × 102 cm3 E) 1.4 × 103 cm3
The answer is E) ; The volume of the brick is approximately 1.4 × 10³ cm³.
How to calculate the volume of a brick?Volume is the amount of space occupied by a three-dimensional object.
To calculate the volume of a brick, we need to convert the dimensions of the brick from inches to centimeters to ensure consistent units. One inch is equal to 2.54 centimeters, so:
Length = 4.0 in × 2.54 cm/in = 10.16 cm
Width = 2.7 in × 2.54 cm/in = 6.858 cm
Height = 8.0 in × 2.54 cm/in = 20.32 cm
The volume of the brick is given by the product of its length, width, and height:
Volume = Length × Width × Height
Volume = 10.16 cm × 6.858 cm × 20.32 cm
Volume = 1,411.88 cm³
Therefore, the volume of the brick is approximately 1.4 × 10³ cm³. The answer is E) 1.4 × 10³ cm³.
Learn more about volume here:
https://brainly.com/question/1578538
#SPJ1
two paths lead to the top ofa big hill, one is steep anddirect, while the other is twice as long but less steep. how much more potential energy would you gain if you take the longer path
you will gain the same amount of potential energy regardless of the path you take
The potential energy gained depends on the height difference between the bottom and the top of the hill. Both paths will give you the same final potential energy, but the longer path will take more time and require more energy input to climb. Therefore, you will gain the same amount of potential energy regardless of the path you take. However, the longer path may require more physical effort and time to climb, even though it is less steep.
Learn more about potential energy at
brainly.com/question/24284560
#SPJ11
each of the four sedimentation basins in a 12.5 MGD treatment plant are 40 feet wide, 160 feet long, and have water depths of 12 feet. What is the detention time (in minutes) in this sedimentation process when one basin is out of service and the plant operating at its maximum flow rate
The detention time in the sedimentation process would be 45 minutes when one basin is out of service and the plant is operating at its maximum flow rate.
To calculate the detention time in a sedimentation basin, we need to know the volume of the basin and the flow rate of the plant.
The volume of one basin can be calculated as:
Volume = length x width x depth = 160 ft x 40 ft x 12 ft = 76,800 cubic feet
Since one basin is out of service, the effective volume of the system is 3/4 of this, or:
Effective volume = 3/4 x 76,800 cubic feet = 57,600 cubic feet
To calculate the detention time, we need to divide the effective volume by the flow rate of the plant.
Flow rate = 12.5 MGD = 18,150 cubic feet per hour
Detention time = effective volume / flow rate
Detention time = 57,600 cubic feet / 18,150 cubic feet per hour = 3.17 hours
Since there are 60 minutes in an hour, the detention time in minutes is:
Detention time = 3.17 hours x 60 minutes per hour = 190.2 minutes or approximately 190 minutes.
Learn more about flow rate
https://brainly.com/question/27880305
#SPJ4
27.10. The current in a wire is doubled. What happens to (a) the current density (b) the conduction-electron density (c) mean time between collisions, and (d) the electron drift speed? Are each of these doubled, halved, or unchanged?
Answer:
When the current in a wire is doubled:
(a) The current density will be doubled. This is because current density is defined as the amount of current flowing per unit area of the cross-sectional area of the wire, so if the current is doubled while the cross-sectional area remains the same, the current density will double.
(b) The conduction-electron density will remain unchanged. This is because the density of free electrons in the wire is determined by the material properties of the wire and is not affected by changes in the current.
(c) The mean time between collisions will remain unchanged. This is because the mean time between collisions is determined by the material properties of the wire and is not affected by changes in the current.
(d) The electron drift speed will remain unchanged. This is because the electron drift speed is determined by the electric field in the wire, which is proportional to the current density. Since the cross-sectional area of the wire remains the same and the conduction-electron density does not change, the electric field and hence the electron drift speed will remain the same.
Explanation:
(250-122) Where necessary to comply with Section 250-2(d), the equipment grounding conductors shall be sized larger than specified in ______.
Where necessary to comply with Section 250-2(d), the equipment grounding conductors shall be sized larger than specified in NEC Table 250.122.
This is because the additional size is necessary to provide a margin of safety and prevent damage to the grounding conductors due to physical stresses, such as from bending, vibration, or impact.
NEC Table 250.122 specifies the minimum size equipment grounding conductor required for various sizes of circuit conductors but does not take into account the need for increased size due to physical protection requirements.
Learn more about the grounding conductors at
https://brainly.com/question/14405035
#SPJ4
For capacitors in parallel that have different capacitances, which one (if any) has the greatest charge?
When capacitors are connected in parallel, they have the same voltage across them, but the charges on each capacitor can be different.
In the case of capacitors with different capacitances, the capacitor with the larger capacitance will have the greatest charge. This is because capacitance is a measure of a capacitor's ability to store charge. Capacitors with larger capacitances can store more charge than capacitors with smaller capacitances. Therefore, the capacitor with the largest capacitance will have the greatest charge. This can be explained by the fact that the larger capacitance provides more surface area for the accumulation of charge, which results in a greater amount of charge being stored.
To know more about capacitors click here:
https://brainly.com/question/17176550
#SPJ11
To examine a specimen under the microscope you start with the scanning objective_____ to locate the specimen
To examine a specimen under the microscope you start with the scanning objective lens to locate the specimen
The scanning objective lens is the lowest magnification lens on the microscope and typically has a magnification of 4x. This lens allows you to scan the slide and locate the specimen of interest before adjusting the focus and moving to higher magnification lenses.
Once the specimen is located, the objective lens can be switched to higher magnifications to examine the specimen in more detail. Starting with the scanning objective lens helps to ensure that you locate the specimen efficiently and effectively, and helps to prevent damage to the microscope or the slide.
To know more about turnover, here
https://brainly.com/question/18661784
#SPJ4
One type of home coffee grinder has a small blade that rotates very rapidly and cuts the coffee beans into powder. Nothing prevents the coffee beans from moving. The reason the beans don't get out of the way when the blade begins to push on them is
Due to the rubbing that occurs between the beans and the grinder's walls. The beans are kept in place by a swirling motion produced as the blade turns quickly.
What is coffee grinder?A coffee grinder is a culinary tool used to powder or crush coffee beans into smaller pieces for use in coffee brewing. Blades or burrs are often used in grinders to crush coffee beans into smaller particles.
In order to ensure that the beans are ground uniformly, the blade is further made to produce a vortex that pulls the beans toward it. A well-designed grinder will have a tight space for the beans to move around in, therefore the size and form of the grinder also affect how much movement the beans experience. Overall, a number of elements interact to maintain the beans in place while they are ground.
To know more about coffee grinder, visit:
brainly.com/question/17074375
#SPJ1
which of following statement regarding holography is incorrect? a. unlike a photography, the holography records both amplitude and phase information of the imaged objects. b. an optical hologram is produced through two beam interference, while image is reconstructed through light diffraction. c. since several types of holograms can be reconstructed using regular white light, these holograms can produce and show true color images. d. when reconstruction beam only illuminates a small section of a hologram, one can still see whole image of the recorded object with lower resolution.
The incorrect statement regarding holography is c. It is not true that several types of holograms can be reconstructed using regular white light to produce and show true color images.
In fact, most holograms are recorded and reconstructed using monochromatic light sources, such as lasers, which do not produce a full spectrum of colors.
The incorrect statement regarding holography is: c. since several types of holograms can be reconstructed using regular white light, these holograms can produce and show true color images. Most holograms require monochromatic light for proper reconstruction, and white light can cause distortions in color reproduction.
To know more about Holography click here .
brainly.com/question/1899017
#SPJ11
Calculate the acceleration of a car (in km/hâs) that can go from rest to 130km/h in 5.0s .
The acceleration of the car is approximately 26 km/h^2.
To calculate the acceleration of the car, we can use the formula:
acceleration = (change in velocity) / time taken
Here, the change in velocity is 130 km/h - 0 km/h = 130 km/h, and the time taken is 5.0 s. Note that we need to convert the units of velocity and time to the same units before we can use this formula. Let's convert km/h to m/s by multiplying by 1000/3600:
130 km/h x (1000 m/km) / (3600 s/h) = 36.11 m/s
Now we can calculate the acceleration:
acceleration = (36.11 m/s) / (5.0 s) = 7.22 m/s^2
To convert this to km/h^2, we can multiply by (3600 s/h) / (1000 m/km):
7.22 m/s^2 x (3600 s/h) / (1000 m/kmthe) = 26 km/h^2
Therefore, the acceleration of the car is approximately 26 km/h^2.
Visit to know more about Acceleration:-
brainly.com/question/460763
#SPJ11
An FM radio station broadcasts radio waves with a frequency of 96,000,000 Hz. What is the speed of these radio waves if they have a wavelength of 3.1 m?
Question 74
The amount of residue left after incineration is approximately
a. 10 to 15 percent of the original volume
b. 25 percent of the original volume
c. 55 to 65 percent of the original volume
d. a and b
10 to 15 percent of the original volume. Incineration is a waste treatment process that involves the combustion of organic substances in waste materials.
This process reduces the waste volume by converting it into ash and gases. The amount of residue left after incineration depends on various factors such as the type of waste material, the incinerator design, and the incineration temperature. In general, the amount of residue left after incineration is approximately 10 to 15 percent of the original volume. Incineration is a waste treatment process that involves the combustion of organic substances in waste materials. During the process, the waste is subjected to high temperatures, which causes it to break down into ash, gas, and other byproducts. The amount of residue left after incineration depends on several factors, such as the type of waste being incinerated, the temperature and duration of the incineration process, and the efficiency of the incinerator itself. In general, it is estimated that the amount of residue left after incineration is approximately 10 to 15 percent of the original volume. However, this can vary depending on the factors mentioned above. In some cases, it may be higher, such as 25 percent of the original volume, but it is unlikely to be as high as 55 to 65 percent of the original volume. It is worth noting that the residue left after incineration is often much less bulky than the original waste, as much of the organic matter has been burned off. This can make it easier to dispose of the residue, as it takes up less space than the original waste.
Learn more about Incineration here:
https://brainly.com/question/9642236
#SPJ11