Susie is looking for butterflies in an area where: 15% of the butterflies are of type A 30% of the butterflies are of type B 55% of the butterflies are of type C Suppose that she spots two butterflies on her walk, and that the types of the two butterflies are independent from each other (perhaps because they are spotted in different locations). (a) What is the probability that the two butterflies she spots will both be type A butterflies

Answer: 211200

Step-by-step explanation: Ok so assuming you are asking how many feet you travel per hour going 40 mph. You would travel 211200. There are 5280 ft in a mile. If you multiply that by 40 you get 211200. So you travel 211200ft per hour

Answer: B )" AAS congruence theorem" an be used to prove that the triangles are congruent .

AAS congruence theorem tells that if two angles and the non-included side of one triangle are congruent to the corresponding parts of another triangle then the triangles are congruent.

Therefore option B is the correct answer. "AAS congruence" theorem an be used to prove that the triangles are congruent

Answer:

x+40= x+x-44

40+44=2x-x

x=84

In a case whereby least common multiple of two whole numbers is 40. the ratio of the greater number to the lesser number is 5:4.  the two numbers are 10 and 8.

Given as :

The least common multiple of two numbers = LCM = 40

The ratio of the greater number to lesser number = 5 : 4

let the greater number = 5 x

And The smaller number = 4x

∵ The LCM of numbers = 40

So, 5 × 4 × x = 40

Or,  20 × x = 60

x= 3

Then greater number = 5 x = 5 × 2 = 10

And  The smaller number = 4 x = 4 × 2 = 8

Hence The two numbers are  10 and 8

Learn more about least common multiple  at:

https://brainly.com/question/14052141

#SPJ1

Answer:

| AD | ≈ 48 m

Step-by-step explanation:

The four steps to copy and paste involve selecting the text, copying the text, selecting the cursor at destination and pasting the text.

When you copy or cut data from its original place, the computer temporarily stores it in a memory region called the clipboard. Data that has been copied or cut is retrieved from the clipboard and pasted to the new spot when you paste it.

When you copy text, a copy of the original text is made and stored in the clipboard; the original text stays in its original place. The original text is taken out of its original spot and placed in the clipboard when you cut text. The original text is retained when you copy it, but it is removed from its original spot when you cut it. The copied or cut text can be pasted into another area in both situations.

You can follow the following 4 steps to copy and paste text or other items in a computer application:

1. By highlighting it with your pointer, you may choose the text or object that you wish to copy.

2. Right-click the text or object you want to copy, then choose "Copy" from the context menu. As an alternative, you may copy by pressing "Ctrl+C" on your keyboard.

3. Place the cursor where you wish to paste the text or object that was copied.

4. "Paste" may be found in the context menu when you right-click the destination. As an alternative, you may paste by using "Ctrl+V" on your keyboard.

To learn more about copying and pasting visit:

https://brainly.com/question/14346851

#SPJ4

The first factor of the expression has a degree of 2.

The second factor has a degree of 3.

The third factor has a degree of 2.

The product has a degree of 7.

[tex](a^{2} ) (2a^{3} )(a^{2}-8a+9)[/tex]

The given expression of this problem is:

The degree of an expression is deduct by the exponent of each power.

So, the first factor of the expression has a degree of 2, because that's the exponent.

The second factor has a degree of 3.

The third factor has a degree of 2.

Now, to know the degree of the product, we have to solve the expression, and see what is the degree of the resulting polynomial expression:

[tex](a^{2})(2a^{3})(a^{2} -8a+9)[/tex]

[tex]2a^{5} (a^{2} -8a+9)[/tex][tex]\\2a^{7} -16a^{6}+18a^{5}[/tex]

so, as you can see, the product has a degree of 7.

To learn more about polynomial

https://brainly.com/question/13412807

Answer:

There is no answer.

Step-by-step explanation:

4(2x+3) = 3+8x-11

Group together common terms on the right & use the distributive property on the left.

4(2x) + 4(3) = (3-11) +8x

8x + 12 = 8x -8

Combine like terms. Subtract 8x from both sides.

12 = -8

Slack and strict are the two types of linear inequalities we deal with our daily examples in mathematics.

Addition, subtraction, multiplication, and division are the four types of operations that can be performed on linear inequalities. Equivalent inequality refers to linear inequalities with the same solution. Both equality and inequality are subject to laws.

An inequality is comparable if both sides are multiplied by a positive value. An inequality's direction can be changed by multiplying both sides by a negative amount.

There are two types of linear inequalities

Slack: inequalities containing sign ≤ or ≥  between LHS and RHS.

Strict: inequalities containing < or > between LHS and RHS.

To learn more about linear inequality visit the link:

https://brainly.com/question/24372553

#SPJ4

Answer:

  A)  -9

Step-by-step explanation:

You want a graphical solution to the system of equations ...

The graph is attached. It shows the solution is (-9, 1).

The x-coordinate of the solution is -9.

The solution of the differential equation would be [tex]r = \dfrac{(\theta - cos\theta) + C}{(sec\theta + tan\theta)}[/tex].

Using the concept of integration that states,

Integration in mathematics is a technique for integrating or adding up the parts to get the total. It involves a differentiation process in reverse.

Given that,

The differential equation is,

[tex]\dfrac{dr}{d\theta } + r sec(\theta ) = cos (\theta )[/tex]

Hence the auxiliary solution,

[tex]\mu (\theta ) = e^{\int\limits {sec\theta} \, d\theta}[/tex]

[tex]\mu (\theta ) = e^{ln |\limits {sec\theta + tan\theta|[/tex]

[tex]\mu (\theta ) = |sec\theta + tan\theta|[/tex]

Hence multiply both sides by [tex]\mu(\theta)[/tex],

[tex]({sec\theta + tan\theta)\dfrac{dr}{d\theta } + ({sec\theta + tan\theta) r sec(\theta ) = cos (\theta ) ({sec\theta + tan\theta)[/tex]

[tex]\dfrac{d}{d\theta} (r \times (sec\theta + tan\theta) = (1 + sin\theta)[/tex]

Integration on both sides,

[tex]r \times (sec\theta + tan\theta) = (\theta - cos\theta) + C[/tex]

Therefore, the solution is,

[tex]r = \dfrac{(\theta - cos\theta) + C}{(sec\theta + tan\theta)}[/tex]

To learn more about integration visit:

brainly.com/question/18125359

#SPJ12

The difference between ASA and AAS congruence rule is While AAS refers to the two corresponding angles and the non-included side, ASA refers to any two angles and the included side.

Two postulates that assist us in determining whether two triangles are congruent are ASA and AAS. ASA means "Angle, Side, Point", while AAS signifies "Angle, Angle, Side". If two figures are the same size and shape, they are congruent. To put it another way, the same person appears in two distinct locations in two congruent figures. According to the ASA congruence rule, two triangles are congruent when the angles and included sides of one side are equal to those of another side. However, if two angles and one side of one triangle are equal to two angles and one side of another triangle, then they are congruent, as stated by AAS. Both ASA and AAS are the same as though two points of one triangle are equivalent to two points of another triangle then clearly the third points will likewise be the same.

Know more about congruency here: brainly.com/question/7888063

#SPJ4

Answer:

y = [tex]\frac{40}{11}[/tex] x + 50

Step-by-step explanation:

the equation of a line in slope- intercept form is

y = mx + c ( m is the slope and c the y- intercept )

calculate m using the slope formula

m = [tex]\frac{y_{2}-y_{1} }{x_{2}-x_{1} }[/tex]

with (x₁, y₁ ) = (0, 50 ) and (x₂, y₂ ) = (11, 90 )

m = [tex]\frac{90-50}{11-0}[/tex] = [tex]\frac{40}{11}[/tex]

the line crosses the y- axis at (0, 50 ) ⇒ c = 50

y = [tex]\frac{40}{11}[/tex] x + 50 ← equation of line

Answer:

  (i) x = 17 cm

  (ii) one end: 360 cm²; both ends: 720 cm²

  (iii) 14,400 cm³

  (iv) 4000 cm²

Step-by-step explanation:

You want the slant height, base area, volume, and total surface area of a trapezoidal prism with the base isosceles trapezoid having parallel base lengths of 32 and 16, and a height of 15. The distance between bases is 40. All units are cm.

If a center rectangle 16 cm wide and 15 cm high is cut from the base trapezoid, the remaining two triangles have a base of 8 cm and a height of 15 cm. The Pythagorean theorem can be used to find the slant height:

  x² = a² +b²

  x² = 8² +15² = 64 +225 = 289

  x = √289 = 17

The slant height, x, is 17 cm.

The area of the base trapezoid is given by the formula ...

  A = 1/2(b1 +b2)h

  A = 1/2(32 +16)(15) = 360 . . . . square cm

The area of one end surface is 360 cm²; the total area of both end surfaces is 720 cm².

The volume of the prism is the product of the base area and the length of the prism.

  V = Bh

  V = (360 cm²)(40 cm) = 14,400 cm³

The volume of the trapezoidal prism is 14,400 cm³.

The lateral surface area of the prism is the product of the perimeter of the base and the distance between bases.

  LA = Ph

  LA = (32 +16 +2·17 cm)(40 cm) = 3280 cm²

The total surface area is the sum of the lateral area and the area of the two bases:

  SA = LA +2B = (3280 cm²) + 2(360 cm²) = 4000 cm²

The total surface area of the prism is 4000 square centimeters.

__

Additional comment

It appears that the top dashed line in the figure is drawn that way in error. It appears to identify a visible edge, so we expect it to be a solid line.

The median of 2/3 and 4 is 2.33.

The median is the middle point in a dataset—half of the data points are smaller than the median and half of the data points are larger.

A data set's median value is the point where 50% of the data points have values that are lower or equal to it, and 50% of the data points have values that are higher or equal to it.

To arrange the data points in ascending order for a small data set, count the number of data points (n).

To get the rank of the data point whose value is the median when the number of data points is unequal, multiply the total by 1 and divide the results by 2.

Median = (2/3+4)/2 = 4.66/2 = 2.33

Thus, the median of 2/3 and 4 is 2.33.

To know more about the median visit: brainly.com/question/28060453

#SPJ4

To get the rank of the data point whose value is the median when the number of data points is unequal, multiply the total by 1 and divide the results by 2.

Median = (2/3+4)/2 = 4.66/2 = 2.33

Thus, the median of 2/3 and 4 is 2.33.

The natural numbers are “closed” under addition and multiplication.

A set is closed (under an operation) if and only if the operation on any two elements of the set produces another element of the same set. The set of whole numbers is “closed” under addition and multiplication.

A set of number with a defined operation (e.g. addition, multiplication etc.), such that the outcome of the operation between any two numbers is also a member ot the set.

A Closed Set Math has a way of explaining a lot of things, and one of those explanations is called a closed set.This closed set includes the limit or boundary of 3.

When a set has closure, it means that when you perform an operation on the set, then you'll always get an answer from within the set. This doesn't mean that the set is closed though. Open sets can have closure. Mathematical examples of closed sets include closed intervals, closed paths, and closed balls.

Learn more about Closed set here ;

https://brainly.com/question/388124

#SPJ4

Answer: 297492

Step-by-step explanation:

[tex]\huge\text{Hey there!}[/tex]

[tex]\mathsf{10 [12^2 + (4 \times 2)] \div 8^2}[/tex]

[tex]\mathsf{= 10[12^2 + (8)] \div 8^2}[/tex]

[tex]\mathsf{= 10[12^2 + 8)] \div 8^2}[/tex]

[tex]\mathsf{= 10[12 \times 12 + 8] \div 8 \times 8}[/tex]

[tex]\mathsf{= 10[144 + 8] \div 64}[/tex]

[tex]\mathsf{= 10[152] \div 64}[/tex]

[tex]\mathsf{= 10(152) \div 64}[/tex]

[tex]\mathsf{= 1,520 \div 64}[/tex]

[tex]\mathsf{= \dfrac{1,520}{64}}[/tex]

[tex]\mathsf{= \dfrac{1,520 \div 16}{64 \div 16}}[/tex]

[tex]\mathsf{= \dfrac{95}{4}}[/tex]

[tex]\mathsf{= 23 \dfrac{3}{4}}[/tex]

[tex]\huge\text{Therefore, your answer is:}[/tex]

[tex]\huge\boxed{\mathsf{= \dfrac{95}{4}\ or \ 23 \dfrac{3}{4}\ or \ even\ 23.75}}\huge\checkmark[/tex]

[tex]\huge\text{Good luck on your assignment \& enjoy your day!}[/tex]

The equation of the quadratic function is (b) C(t) = (t - 4)²

From the question, we have the table of values that can be used in our computation:

A quadratic equation is represented as

f(x) = a(x - h)² + k

Where

Vertex = (h, k)

From the graph, we have the vertex to be

(h, k) = (4, 0)

Substitute (h, k) = (4, 0) in f(x) = a(x - h)² + k

So, we have

f(x) = a(x - 4)²

Also, from the graph, we have the point (2, 4)

This means that

a(2 - 4)² = 4

So, we have

4a = 4

Divide both sides by 4

a = 1

Substitute a = 1 in f(x) = a(x - 4)²

f(x) = (x - 4)²

Rewrite as C(t)

C(t) = (t - 4)²

Hence, the equation is C(t) = (t - 4)²

Read more about quadratic equations at

brainly.com/question/24334139

#SPJ1

its C(t) = (x − 4)2

use desmos graphing its very helpful

The HCF of the polynomials x^6 -  3x^4+ 3x² - 1 and x³+ 3x^2+ 3x+ 1 is (x+1)^3.

Let us suppose the Polynomials to be f(x) = x^6 - 3x^4 + 3x^2 - 1  And polynomial g(x) = x^3 + 3x^2 + 3x + 1

Now,  According to the question,

we have f(x) = x^6 - 3x^4 + 3x^2 - 1  

Adding and subtracting 2^x2,

⇒ x^6 - x^4 - 2x^4 + 2^x2 + x^2 - 1

⇒ x^4(x^2 - 1) - 2x^2(x^2 - 1) +1(x^2 + 1)

⇒ (x^2 - 1)(x^4 - 2x^2 + 1)

⇒ (x + 1)(x - 1)(x^4 - 2x^2 + 1)

⇒ (x + 1)(x - 1)(x2 - 1)^2

⇒ (x + 1) (x - 1) (x + 1)^2 (x - 1)2

⇒ (x + 1)^3(x - 1)^3      ----(1)

And, g(x) = x^3 + 3x^2 + 3x + 1

⇒ x^3 + x^2 + 2x^2 + 2x + x + 1

⇒ x^2(x + 1) + 2x(x + 1) + 1(x + 1) ⇒ (x + 1)(x^2 + 2x + 1)

⇒ (x + 1) (x + 1)2 ⇒ (x + 1)3      ----(2)

Now, The HCF of f(x) and g(x) is the common factor of equations (1) and (2)

⇒ (x + 1)^3 .

∴ The HCF of the polynomials (x^6 - 3x^4 + 3x^2 - 1) and (x^3 + 3x^2 + 3x + 1) is (x + 1)^3.

To learn more about polynomials, visit link -brainly.com/question/11536910

#SPJ4

A line bisector divides a given line into two equal sections or parts. Thus the required proof to show that BC ≅ DF is stated below:

A given line is said to have been bisected if and only if it is divided into two equal parts by a constructed line. The line that divides a given line into two equal parts is termed a line bisector.

The appropriate proof is as stated below:

              STATEMENT                                                 REASON

1. AB ≅ FG                                                              Given

2. BF bisects AC and DG                                      Given

3. AB ≅ BC                                                             Definition of a bisector

4. DF ≅ FG                                                             Definition of a bisector

5. AC ≅ DG                                                         Property of two congruent lines

6. BC ≅ DF                                                         Property of two congruent lines

Therefore it can be deduced that BC ≅ DF  (property of two congruent lines)

Learn more about properties of a line bisector at https://brainly.com/question/12923440

#SPJ1

A) An unbounded problem is one for which the objective can be increased or decreased to infinity or negative infinity while the solution remains feasible.

B) If a model has alternative optimal solutions the objective is maximized (or minimized) by more than one combination of decision variables, all of which have the same objective function value.

In mathematics, a function from a set X to a set Y assigns to each element of X exactly one element of Y. The set X is called the domain of the function and the set Y is called the codomain of the function.

C) The shadow price indicates how much the value of the objective function will change as the right-hand side of a constraint is increased by 1.

To learn more about shadow price visit:

brainly.com/question/20737006

#SPJ4

I don't see the picture. Can you send it in the message.

Answer: 2

Step-by-step explanation:

If you have four sticks of butter that equal a pound, and each stick is 1/2 a cup, then a pound of butter is equal to 2 cups. This is because 1/2 x 4 = 2. Each stick of butter is 1/2 a cup, and since there are four sticks in a pound, the total amount of butter in cups is 2 cups.

The number of days the lizard that will be taken to reach the top will be 8 days .

Since we're given the information that the spider each day climbs five meters and slides back one meter, that means that it climbs for 4 meters daily .

Number of meters for each day = 5 - 1

= 4 meters

Therefore, since the spider is climbing up a 30 meter building, the number of days required will be :

= 30 / 4

= 15 / 2

= 7.5

= 8 days approximately.

Hence The number of days will be needed to reach the top is 8 days.

Learn more about the days here:

https://brainly.com/question/29135923

#SPJ4

The general value of theta which satisfies the equation (cosФ+isinФ)(cos2Ф+isin2Ф)..............(cosnФ+isinnФ) is one is 4π/(n+1)

Real and imaginary numbers:

A real number can be a natural number, a whole number, an integer, a rational number, or an irrational number. But an imaginary number is the product of a real number and "i" where i = √(-1). For example, √(-9) = √(-1) . √9 = i (3) = 3i

cosФ+isinФ = [tex]e^{i0}[/tex]

cos2Ф+isin2Ф = [tex]e^{2i0}[/tex]

............................

cosnФ+isinnФ= [tex]e^{in0}[/tex]

Now,

[tex]e^{i0}[/tex]×[tex]e^{2i0}[/tex]×.......[tex]e^{in0}[/tex] =1

[tex]e^{i0(1+2+....n)}[/tex]  = 1

[tex]e^{i0(n*(n+1)/2)}[/tex] =1

So

cos(n*(n+1)/2)Ф+isin(n*(n+1)/2)Ф =1

Now comparing the real and the imaginary part we get that

cos(n*(n+1)/2)Ф = 1

n*(n+1)/2Ф = 2nπ

Ф = 4π/(n+1)

Therefore, the general value of theta which satisfies the equation (cosФ+isinФ)(cos2Ф+isin2Ф)..............(cosnФ+isinnФ) is one is 4π/(n+1).

Learn more about trigonometry:

https://brainly.com/question/13729598

#SPJ4

The correct question should be:

find the general value of theta which satisfies the equation (cosФ+isinФ)(cos2Ф+isin2Ф)..............(cosnФ+isinnФ) equals to one.

The gradient of y=-4x+9 is -4. The gradient of a line is the measure of its steepness.

It is calculated by taking the derivative of the line. When taking the derivative of a linear equation, the derivative is the coefficient of the variable (x). In this case, the coefficient of x is -4. Therefore, the gradient of y=-4x+9 is -4.

To calculate this gradient, we need to use the power rule of derivatives. This rule states that if y = ax^n, then the derivative of y is nax^(n-1). In this case, a=-4 and n=1. Therefore, the derivative of y=-4x+9 is -4*1^(1-1), which simplifies to -4.

To calculate the gradient of y=-4x+9, we applied the power rule of derivatives. The coefficient of x in this equation was -4, so the derivative of y was -4. Therefore, the gradient of y=-4x+9 is -4.

Learn more about gradient here:

https://brainly.com/question/25846183

#SPJ4

The value of "i" squared or 1 i by 1 i results in:

(-1)

Among the numerical sets there is one that we call complex numbers, which include values that are not real, such as "i" a letter that denotes that it is an imaginary number.

Numerical sets are groupings of numerical values that have a particularity in common, they can be integers, decimals, fractions, among others.

In function to this type of numbers there is a particular value and it is the "i" which is the result of the square root of -1, then we have:

√(-1) x √(-1) = i²

[√(-1)]² = i²

(-1) = i²

Learn more about complex numbers at:

brainly.com/question/12241782

#SPJ4

A relative frequency distribution shows C. the fraction or percentage of observations in each class interval.

A relative frequency is a proportional value that indicates the relative number of a specific event in a total number of observations.

A relative frequency uses percentages, proportions, and fractions to show the value of the chosen or expected outcome.

With a relative frequency distribution, it does not merely show the number of observations in each class interval or set of data.

Thus, a relative frequency distribution indicates Option C because it compares one value against other observations in relative terms.

Learn more about relative frequency distributions at https://brainly.com/question/28353418

#SPJ1