suppose you mix 100.0 g of water at 24.2 oc with 75.0 g of water at 78.7 oc. what will be the final temperature of the mixed water, in oc? type answer:

The Wittig reaction is a chemical reaction that involves the synthesis of alkenes from aldehydes or ketones through the use of a phosphorus ylide and a base. The goal of the Wittig reaction is to create a carbon-carbon double bond.

The goal of the Wittig reaction is to create a carbon-carbon double bond by removing the carbonyl group of the aldehyde or ketone and replacing it with an alkene group.

This reaction is widely used in organic chemistry for the synthesis of various types of molecules, including pharmaceuticals, natural products, and materials. The reaction is named after its discoverer, German chemist Georg Wittig, who was awarded the Nobel Prize in Chemistry in 1979 for his contributions to the development of the reaction.

More Wittig reaction: https://brainly.com/question/30931612

#SPJ11

In the lab, you examined factors that the influence of the absorption of the energy from the sun. You will investigated how the type of the material and the angle of the insolation affect the absorption of the heat.

The type of the material that will affects the absorption of the sunlight in the Earth's surface this is because of the different materials that will absorb the heat from the sunlight at the different rates. This results will support the  hypothesis this is because of the results that will show that air which is absorbs heat faster as compared to the any of the materials.

The amount of the absorption and the scattering which will depends on the nature of the molecules and the concentration of the air molecules and the small particles that is present in the atmosphere.

To learn more about absorption here

https://brainly.com/question/17715292

#SPJ4

When atoms share electrons to gain the stable electron configuration of a noble gas, the bonds formed are covalent.

Covalent bonds occur when two atoms share one or more pairs of electrons in order to achieve a full outermost energy level, which is the same as that of a noble gas. This sharing of electrons allows both atoms to attain a stable configuration and become more chemically stable.

Covalent bonds can be single, double, or triple depending on the number of electrons shared between the atoms. The electrons that are shared in a covalent bond are referred to as shared pairs. The presence of unshared pairs of electrons in a molecule can affect its chemical properties and reactivity. Covalent bonds are the most common type of chemical bond and are found in a wide variety of molecules, including water, carbon dioxide, and many organic molecules.

Learn more about covalent bonds at https://brainly.com/question/3447218

#SPJ11

The majority of nitrogen oxide originates from option A and D: motor vehicles and burning of industrial wastes.

Nitrogen oxides are discharged into the atmosphere by burning coal, oil, diesel fuel, and natural gas, particularly in electric power plants, or by motor vehicle exhaust. They are also released during industrial procedures such dynamite blasting, engraving, welding, and electroplating. Smoking cigarettes also causes the release of nitrogen oxides.

Water vapor is the most prevalent gas emitted during volcanic eruptions. Among the other gases released is carbon dioxide ​(CO₂), carbon monoxide (CO), hydrogen chloride (HCl), hydrogen fluoride (HF), hydrogen sulfide (H₂S), sulfur dioxide (SO₂), and hydrogen.

Nitric oxide (NO), commonly known as nitrogen monoxide, is a colorless, poisonous gas created when nitrogen is oxidized. Nitric oxide has a number of uses in medicine and plays a significant role in chemical signaling in both humans and other animals.

To know more about nitrogen oxide, refer:

https://brainly.com/question/3511163

#SPJ4

Wood breaks down in an anaerobic environment and releases methane, a useful source of energy. This methane has a chance to substitute for fossil fuels.

Biogas is a gas mixture formed by the decomposition of organic waste in the absence oxygen air, typically containing methane and other ingredients. As a consequence, methane is rather than fossil fuel.

Anaerobic breakdown is the process of breaking up organic matter to produce biogas and biofertilizers. AD necessitates a series of mechanisms in which microbes breakdown up materials that decompose in a lack of oxygen.

To know more about methane visit:

https://brainly.com/question/2127750

#SPJ1

A

Explanation:

Because the number of carbon, hydrogen and oxygen atoms on both sides of the equation are not equal. One way to test if an equation if balanced is comparing the sums of the atoms on both sides of the equation.

The coefficient of water in the balanced chemical reaction is option D- 2

The balanced chemical reaction for the neutralization of calcium hydroxide Ca(OH)₂ with sulfuric acid H₂SO₄ is: Ca(OH)₂ + H₂SO₄ → CaSO₄ + 2H₂O

In the balanced chemical reaction for the neutralization of calcium hydroxide with sulfuric acid, one molecule of calcium hydroxide Ca(OH)₂ reacts with one molecule of sulfuric acid H₂SO₄ to produce one molecule of calcium sulfate CaSO₄ and two molecules of water 2H₂O.

This reaction is an example of an acid-base neutralization reaction, where an acid reacts with a base to form a salt and water. Calcium hydroxide is a base because it can neutralize an acid by accepting protons (H+) from the acid. Sulfuric acid is an acid because it can donate protons to a base. In the reaction, the protons from sulfuric acid react with the hydroxide ions from calcium hydroxide to form water, and the calcium and sulfate ions combine to form calcium sulfate.

The balanced chemical equation is important because it shows the relative amounts of reactants and products involved in the reaction.

learn more about chemical reaction here:

https://brainly.com/question/29762834

#SPJ4

To minimize enzymatic browning, you can use the following four methods: Acid Treatment; Cold Temperature; Blanching;  Reducing Exposure to Oxygen.

1. Acid Treatment: Apply a solution of lemon juice or vinegar on the cut surfaces of fruits or vegetables. The acidic environment lowers the pH and inhibits the activity of the enzyme polyphenol oxidase, responsible for enzymatic browning.
2. Cold Temperature: Store the fruits or vegetables in a cold environment, such as a refrigerator. Lower temperatures slow down the enzymatic reactions, reducing browning.
3. Blanching: Briefly boil the fruits or vegetables in water for a short time and then quickly cool them in ice water. This heat treatment denatures the enzymes, preventing enzymatic browning.
4. Reducing Exposure to Oxygen: Limit the cut surfaces' exposure to air by wrapping them with plastic wrap or storing them in airtight containers. Reduced oxygen contact slows down the enzymatic browning process.
By using these methods, you can minimize enzymatic browning and keep your fruits and vegetables looking fresh and appealing.

learn more about polyphenol oxidase Refer: https://brainly.com/question/30898546

#SPJ11

Answer:

The ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

We have P = 6 atm, V = 40 L, T = 275 K, and R = 0.0821 atmL/molK.

Rearranging the ideal gas law, we get:

n = PV/RT

Substituting the values we have:

n = (6 atm * 40 L) / (0.0821 atmL/molK * 275 K)

n = 9.49 moles

Therefore, we have 9.49 moles of gas in the 40 L container.

To create 3.5 L of a 1.0 mol/L solution, 0.7 L of the 5 mol/L solution is needed.

Add 0.1 ml of methyl red solution to 100 ml of water to dissolve it. While continuously stirring, slowly pour in the acid from a burette until the mixture turns a pale pink colour. To continue the titration, cool the solution after bringing it to a boil.

C1V1 = C2V2

where:

C1 = concentration of the initial solution (in mol/L)

V1 = volume of the initial solution (in L)

C2 is the final solution's concentration (in mol/L).

V2 is the final solution's volume (in L)

To solve for V1, we may rearrange the equations as follows:

V1 = (C2 x V2) / C1

Substituting the given values, we get:

V1 = (1.0 mol/L x 3.5 L) / 5.0 mol/L

V1 = 0.7 L

To know more about solution visit:-

https://brainly.com/question/30665317

#SPJ1

Understanding the genetic basis of complex features and disorders requires the complete genome sequencing of an organism like C. elegans.

The sequencing of a genome sequence of the organism can help to find what organs and what part is performing which of the function of the body of the organism. For instance, scientists can locate genes linked to particular illnesses and create medications that specifically target these genes.

Additionally, they can research how specific genes and regulatory components function and create brand-new genetic engineering techniques to change them. Overall, sequencing a genome in its whole is a crucial step in better understanding biology.

To know more about genome sequencing, visit,

https://brainly.com/question/29598514

#SPJ4

The formation of 1-bromobutane involves the following reaction mechanism: 1. Nucleophilic substitution (SN2): Butanol reacts with a bromide ion (Br-) to form 1-bromobutane and a hydroxide ion (OH-). Butanol + Br- → 1-bromobutane + OH-

The formation of 1-butene and di-n-butyl ether are side reactions in this process:
1. Elimination (E2) reaction: Butanol undergoes an elimination reaction to form 1-butene and water.
Butanol → 1-butene + H2O

2. Williamson ether synthesis: Two butanol molecules react with each other in the presence of a base, forming di-n-butyl ether and water.
2 Butanol + Base → di-n-butyl ether + H2O + Base

It's necessary to remove water before weighing the 1-bromobutane because water could alter the measured weight, leading to inaccurate results. Water can also promote side reactions like the formation of di-n-butyl ether, which could further impact the yield and purity of the desired product, 1-bromobutane.

More on Nucleophilic substitution: https://brainly.com/question/28787378

#SPJ11

Miscellaneous metalwork is most frequently fabricated from D. steel. Steel is a versatile and strong material, making it a popular choice for various metalwork projects.

Steel is a strong, durable, and versatile metal that is relatively inexpensive and easy to work with. It is a common choice for many metalworking applications due to its ability to be formed, machined, and welded into a variety of shapes and sizes. Steel has excellent corrosion resistance, making it a popular choice for outdoor applications such as railings, fencing, and signposts. It also has a high melting point, allowing it to withstand extreme temperatures. Other metals such as iron, aluminum, and copper can also be used for miscellaneous metalwork fabrication, however steel is the most common material due to its strength, cost, and versatility.

To learn more about steel click here https://brainly.com/question/17371354

#SPJ11

The largest bond angle is predicted to be in compound D. [tex]CH_{4}[/tex]

The bond angles in these molecules are determined by the electron-domain geometry, which is influenced by the central atom's hybridization and the presence of lone pairs. In these compounds, [tex]H_{2}O[/tex] has two lone pairs and two bonded pairs of electrons, giving it a bent molecular geometry with a bond angle of 104.5°. [tex]NH_{3}[/tex]has one lone pair and three bonded pairs, resulting in a trigonal pyramidal shape with a bond angle of 107.3°. [tex]BH_{3}[/tex] has no lone pairs and three bonded pairs, leading to a trigonal planar geometry with a bond angle of 120°.

Both [tex]CH_{4}[/tex] and [tex]SiH_{4}[/tex]have no lone pairs and four bonding pairs of electrons, which results in a tetrahedral electron-domain geometry. The ideal bond angle for a tetrahedral molecule is 109.5°. However, the bond angle in [tex]SiH_{4}[/tex] is slightly smaller than in [tex]CH_{4}[/tex] due to the larger atomic size and longer bonds in [tex]SiH_{4}[/tex], which allows for greater electron repulsion between the bonding pairs. This results in a slightly compressed tetrahedral geometry with a bond angle of less than 109.5°.

Therefore, among the given compounds, [tex]CH_{4}[/tex] (methane) is predicted to have the largest bond angle, close to the ideal tetrahedral angle of 109.5°. Therefore. Option D is correct.

Know more about methane here:

https://brainly.com/question/12645635

#SPJ11

Answer:

Tensile and flexural strength

Explanation:

[tex]hope \: it \: helps[/tex]

a common colligative property that is explored in many experiments and real-life applications is the freezing point depression.

Freezing point depression is a colligative property that depends on the number of solute particles in a solution, but not on their identity or chemical properties. When a solute is added to a solvent, it lowers the freezing point of the solution compared to the pure solvent. This is because the presence of solute particles disrupts the crystal lattice structure of the solvent, making it more difficult for the solvent molecules to arrange themselves in an ordered manner and form ice crystals. As a result, a solution will freeze at a lower temperature than the pure solvent.

Freezing point depression is a useful colligative property in many applications, such as in antifreeze solutions used in automobiles and in the preservation of food and biological samples by freezing. It is also commonly explored in chemistry experiments, where it can be used to determine the molecular weight of an unknown solute by measuring the freezing point depression of a known solvent-solute solution.
Visit to know more about Colligative  property:-

brainly.com/question/1831338

#SPJ11

Enantiomers, which are stereoisomers with non-superimposable mirror images, cannot be separated from each other by recrystallization alone, as they have identical physical and chemical properties.

Enantiomers cannot be separated from each other by recrystallization alone. Recrystallization is a process of purifying a compound by dissolving it in a solvent and then allowing it to slowly crystallize out of the solution. Enantiomers have identical physical properties such as solubility and melting point, making it impossible to separate them using recrystallization. However, enantiomers can be separated using chromatography techniques such as chiral chromatography, which takes advantage of the differences in the interaction of enantiomers with a chiral stationary phase. In this method, the mixture to be separated is dissolved in a solvent and the solution is passed through a column packed with material that tends to adsorb organic compounds.

To know more about chromatography

please click:-

https://brainly.com/question/29997924

#SPJ11
 

The correct answer is A. The principal reason that lumber is graded is to establish uniform standards of quality.

This helps ensure that builders and consumers can rely on consistent and reliable lumber for construction purposes. Grading also helps to categorize lumber based on strength and other characteristics, but the primary purpose is to establish quality standards. Grading is done on a scale that takes into account the species and grade of the wood, as well as the amount of knots and other defects.

   This helps to ensure that the wood is suitable for a particular use and provides a consistent standard of quality for all lumber products. Grading also helps to provide assurance that the lumber meets the applicable building codes and standards for its intended use.

To learn more about quality click here https://brainly.com/question/1754434

#SPJ11

The concentration of H_3(AsO_4) in the solution is 0.113 mol/L.

Any chemical process in which an acid and a base quantitatively combine to produce salt and water is referred to as a neutralization reaction. In a neutralization reaction, a mixture of H^{+} and OH^{-} ions results in the formation of water.

In the process of neutralization, an acid and a base or alkali (soluble base) react chemically to create a salt and water solution. This process is also known as a water-forming reaction (H_2O).

The balanced chemical equation is:

H_3(ASO_4) + 3 Ag(OH) → Ag_3(ASO_4) + 3 H_2O

We can observe that three moles of Ag(OH) and one mole of H_3(ASO_4) react,

0.30 mol/L x 0.0520 L = 0.0156 mol

The concentration of H_3(ASO_4) is:

0.0156 mol / 0.138 L = 0.113 mol/L

To know more about the neutralization visit:

https://brainly.com/question/15255706

#SPJ1

0.113 mol/L is the concentration of the h3(aso4)

What is the short definition of a neutralizing reaction?

A neutralization reaction is a chemical process in which an acid and a base combine to produce salt and water as the end products. H+ ions and OH- ions combine to generate water during a neutralization process.

Acid-base reactions or acid-base neutralization reactions are more often used names for neutralization reactions. These reactions between hydrogen (or hydronium) ions and hydroxide ions result in the formation of water in terms of Arrhenius and Bronsted-Lowry acids and bases.

Three moles of Ag(OH) and one mole of H3(ASO4) can be shown to react.

0.30 mol/L x 0.0520 L = 0.0156 mol

The concentration of H3(ASO4) is:

0.0156 mol / 0.138 L = 0.113 mol/L

To learn more about neutralizing reaction use:

https://brainly.com/question/23008798

#SPJ1

More information is known about the effects of trace amounts of chemical carcinogens than radiation effects. While both can potentially cause cancer, the effects of radiation exposure are still being studied and understood. This statement is True.

Exposure to some chemicals and hazardous substances can increase the risk of cancer. A few well-known carcinogens are asbestos, nickel, cadmium, radon, vinyl chloride, benzidene, and benzene. These carcinogens may act alone or with another carcinogen to increase your risk.

Physical fragmentation, often known as disintegration, is the act of breaking down large molecules into smaller ones without altering their chemical makeup. The induction of (1) mutations, including changes to the single gene or chromosome structure; (2) changes in gene expression, without mutations; and (3) oncogenic viruses, which may then result in neoplasia, are some of the mechanisms by which radiation may produce carcinogenic changes.

To know more about chemical carcinogens click here:

https://brainly.com/question/29896974

#SPJ11

The two different ions present in the compound Al(NO₃)₃ are Al³⁺ and NO₃⁻.

Generally, an ion is defined as an atom or group of atoms that has an electric charge. Basically, ions with a positive charge are called cations and ions with a negative charge are known as anions. Also, many normal substances exist in the body as ions.

Aluminium nitrate [Al(NO₃)₃] is a compound which is made up of two ions named as aluminium ion which is the cation and nitrate ion which is the anion. Basically, Aluminium nitrate is water soluble salt which is crystalline hydrate in nature.

The balanced chemical reaction is given as,

3 Al³⁺ + 3 NO₃⁻ → 3 Al(NO₃)₃

Learn more about ions from the link given below.

https://brainly.com/question/14982375

#SPJ4

Based on the information provided, we can infer that the solution is either acidic or neutral since phenolphthalein turns colorless in acidic solutions and phenol red turns red in neutral or slightly basic solutions.

Therefore, the pH of the solution could be between 7 (neutral) and 4.5 (the pH at which phenolphthalein turns colorless). Without further testing or information, it is impossible to determine the exact pH of the solution.

Phenolphthalein turns colorless in acidic solutions (pH < 8.2) and phenol red turns red in acidic solutions (pH < 6.8). Since both indicators show a color change consistent with an acidic solution, the pH of the unknown solution is likely below 6.8.

To know more about solution click here

brainly.com/question/29015830

#SPJ11

A solution of unknown pH was tested with two indicators: phenolphthalein and phenol red.

Phenolphthalein turns colorless and phenol red turns red. To determine the possible pH of the solution, let's examine the color changes of these two indicators at different pH levels.

Phenolphthalein is colorless in acidic solutions (pH < 8.2) and turns pink in basic solutions (pH > 8.2). Since it is colorless in your solution, the pH must be less than 8.2.

Phenol red turns yellow in acidic solutions (pH < 6.8), red in neutral solutions (around pH 6.8 to 8.0), and orange or pink in basic solutions (pH > 8.0). Since it turns red in your solution, the pH must be between 6.8 and 8.0.

Considering both indicators' color changes, the possible pH of your solution could be between 6.8 and 8.0.

To know more about phenolphthalein and phenol red:

https://brainly.com/question/31546816

#SPJ11

If nitrogen is removed from the system at equilibrium, the hydrogen concentration will decrease.

If nitrogen is removed from the system at equilibrium, the equilibrium will shift to the right-hand side to compensate for the loss of nitrogen. As a result, more ammonia will be produced from the existing hydrogen and the hydrogen concentration will decrease. This is due to Le Chatelier's principle, which states that a system at equilibrium will respond to any change by shifting the equilibrium position in a way that counteracts the change.

In this case, removing nitrogen causes a decrease in the concentration of one reactant, which means that the equilibrium will shift to favor the production of more products. As a result, the concentration of ammonia will increase and the concentration of hydrogen will decrease.

However, the decrease in hydrogen concentration will not be as drastic as the increase in ammonia concentration since there are still two moles of hydrogen for every mole of nitrogen that was removed. Overall, the equilibrium will shift to restore equilibrium and minimize the effect of the disturbance.

For more such questions on equilibrium, click on:

https://brainly.com/question/13414142

#SPJ11

The cathode in the Downs cell is the electrode where reduction occurs, so we would expect the following half-reaction to occur at the cathode:

[tex]2Na^+(molten) + 2e^-[/tex] → [tex]2Na(s)[/tex]

The Downs cell is an electrolytic cell used for the electrolysis of molten sodium chloride (NaCl) to produce sodium metal and chlorine gas.

In this half-reaction, two positively charged sodium ions ([tex]Na^+[/tex]) are reduced by gaining two electrons ([tex]2e^-[/tex]) to form neutral sodium atoms (Na), which then combine to form metallic sodium (Na(s)).

At the anode of the Downs cell, oxidation occurs, and the following half-reaction occurs:

[tex]2Cl^-(molten)[/tex] → [tex]Cl_2(g) + 2e^-[/tex]

In this half-reaction, two negatively charged chloride ions ([tex]Cl^-[/tex]) lose two electrons to form chlorine gas ([tex]Cl_2[/tex]). The overall reaction of the Downs cell is the sum of the cathode and anode half-reactions:

[tex]2Na^+(molten) + 2Cl^-(molten)[/tex]→[tex]2Na(s) + Cl_2(g)[/tex]

This reaction is important for the production of sodium and chlorine on an industrial scale.

For more question on Downs cell click on

https://brainly.com/question/28303092

#SPJ11

To calculate the heart rate of an individual with a cardiac output of 7.0 L and a stroke volume of 70 mL/min, we need to use the formula: Cardiac Output (CO) = Stroke Volume (SV) x Heart Rate (HR).

First, we need to convert the stroke volume from ml/min to liters: 70 mL/min = 0.07 L/min
Now we can plug in the values: 7.0 L/min = 0.07 L/min x HR, To solve for HR, we need to divide both sides by 0.07L/min: HR = 7.0 L/min ÷ 0.07 L/minmHR = 100 beats per minute, Therefore, the heart rate of this individual would be 100 beats per minute, given a cardiac output of 7.0 L and a stroke volume of 70 ml/min.

Now, you can plug in the values into the formula: Heart Rate = 7.0 L/min / 0.07 L/beat
Heart Rate ≈ 100 beats/min, So, the individual's heart rate is approximately 100 beats per minute.

To know more about formula click here

brainly.com/question/29886204

#SPJ11

To calculate the heart rate of an individual with a cardiac output of 7.0 L and a stroke volume of 70 ml/min, you'll need to use the following formula:

Heart Rate = Cardiac Output / Stroke Volume

Step 1: Convert the cardiac output and stroke volume to the same units. In this case, let's convert the cardiac output to milliliters (mL). Since 1 L equals 1000 mL, the cardiac output is 7.0 L * 1000 mL/L = 7000 mL.

Step 2: Plug the values into the formula:

Heart Rate = 7000 mL (Cardiac Output) / 70 mL/min (Stroke Volume)

Step 3: Calculate the heart rate:

Heart Rate = 7000 mL / 70 mL/min = 100 beats/min

So, the heart rate of the individual is 100 beats per minute.

To know more about Heart rate Calculation:

https://brainly.com/question/871799

#SPJ11

There is no possibility of an E2 reaction occurring when alkyl halides are reacted with sodium iodide in acetone as neither acetone solvent accepts a halide nor sodium iodide is a proper reagent to take away a halide.

When alkyl halide is reacted with sodium iodide in acetone, it follows the SN2 mechanism. The iodide ion is a strong nucleophile as well as a good leaving group.

As well as acetone being an aprotic solvent, it promotes the SN2 mechanism over the E2 mechanism. This reaction is known as the Finkelstein reaction. And the reaction is written as:

R-X + NaI ------- acetone-----> R-I + NaX

where X is a halide such as Cl, Br.

Learn more about Alkyl halides:

https://brainly.com/question/29507922

#SPJ4

The given statement "A balanced equation is necessary to determine which reactant is the limiting reagent" is true because a balanced chemical equation gives the stoichiometric ratios between the reactants and products, which allows us to determine the number of moles of each reactant required for the reaction.

The limiting reagent is the reactant that is completely consumed and limits the amount of product that can be formed. Therefore, the ratio of the moles of each reactant to the stoichiometric coefficients in the balanced equation is used to determine which reactant is the limiting reagent.

Without a balanced equation, we cannot accurately determine the stoichiometric ratios or the limiting reagent, and this could lead to inefficient use of reactants or incomplete reactions. Thus, a balanced equation is necessary to determine the limiting reagent accurately.

For more questions like Equation click the link below:

https://brainly.com/question/28984750

#SPJ11

A major problem that is thwarting efforts to clean up the air is: b. Lack of routine air quality monitoring in developing nations.

Air pollution is rising, common and dangerous effect seen in current scenario. The excessive usage of harmful equipments like vehicles, air conditioners, refrigerators and others leads to contamination of environment.

The inhalation of toxic gases leads to lung disorders and other bodily issues. It also has harmful effect on environment and animals. The improper air cleaning frequency has further lead to no change in worst scenario of air pollution.

Learn more about air pollution -

https://brainly.com/question/1187636

#SPJ4

Phosphorus trihydride, PH₃, gas is produced when phosphorus, P₄, is reacted with hydrogen gas. if 23.89 grams of hydrogen,  H₂, is reacted with excess phosphorus gas, the pressure of the PH₃ gas produced is 28.9 atm.

To calculate the pressure of PH₃ gas produced when 23.89 grams of H₂ reacts with excess P₄ gas, we need to first balance the chemical equation, then calculate the moles of PH₃ produced, and finally use the ideal gas law to find the pressure. The balanced chemical equation is:

P₄ + 6H₂ -> 4PH₃

From the balanced equation, we see that 6 moles of H₂ react with 1 mole of P₄ to produce 4 moles of PH₃. So, the number of moles of PH₃ produced can be calculated as follows:

moles of PH₃ = (23.89 g H2) / (2.016 g/mol H₂) x (1 mol PH₃ / 6 mol H₂) = 0.986 mol PH₃

Using the ideal gas law, we can find the pressure of the PH₃ gas produced:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we convert the temperature from Celsius to Kelvin:

T = 75.0 + 273.15 = 348.15 K

Plugging in the values, we get:

P = nRT / V = (0.986 mol) x (0.0821 L·atm/mol·K) x (348.15 K) / (3.15 L) = 28.9 atm

Therefore, the pressure of the PH₃ gas produced is 28.9 atm.

To know more about the Phosphorus trihydride refer here :

https://brainly.com/question/13785267#

#SPJ11

(a) The adjusted condition is [tex]3N_{2} O_{4} + 2TeO_{3} ^2- 6NO_{3} ^- + 2Te[/tex].

(b)The adjusted condition is[tex]40IO^- + 5ReO_{4} ^- + 28H_{2} O = 40IO_{3} ^- + 5Re + 116H^+[/tex].

a) [tex]TeO_{3} ^2- + N_{2} O_{4} = Te + NO3^-[/tex]

Step 1: Identify the oxidation states of each component within the condition:

Te: +6 →

N: +4 → +5

O: -2 → -2

Te is diminished, and N is oxidized.

Step 2: Partitioned the condition into two half-reactions: oxidation and decrease.

Oxidation:[tex]N_{2} O_{4} = NO_{3} ^-[/tex]

Decrease:[tex]TeO_{3} ^2- = Te[/tex]

Step 3: Adjust the particles in each half-reaction.

Oxidation: [tex]N_{2} O_{4} = 2NO_{3} ^-[/tex]

Diminishment: [tex]TeO_{3} ^2- = Te[/tex]

Step 4: Adjust the charges in each half-reaction by including electrons.

Oxidation: [tex]N_{2} O_{4} + 4e^- = 2NO_{3} ^-[/tex]

Lessening:[tex]TeO_{3} ^2- + 6e^- = Te[/tex]

Step 5: Balance the electrons within the two half-reactions by duplicating the oxidation half-reaction by 3 and the decrease half-reaction by 2.

[tex]3N_{2} O_{4} + 12e^- = 6NO_{3} ^-[/tex]

[tex]2TeO_{3} ^2- + 12e^- = 2Te[/tex]

Step 6: Combine the two half-reactions and cancel out the electrons.

[tex]3N_{2} O_{4} + 2TeO_{3} ^2- = 6NO_{3} ^- + 2Te[/tex]

b) [tex]ReO_{4} ^- + IO^- = Re + IO_{3} ^-[/tex]

Step 1: Identify the oxidation states of each component within the condition:

Re: +7 →

O: -2 → -2

I: -1 → +5

Re is diminished, and I is oxidized.

Step 2: Partitioned the condition into two half-reactions: oxidation and diminishment.

Oxidation: [tex]IO^- = IO_{3} ^-[/tex]

Lessening: [tex]ReO_{4} ^- = Re[/tex]

Step 3: Adjust the particles in each half-reaction.

Oxidation: [tex]5IO^- + 6H_{2} O = 5IO_{3} ^- + 12H^+[/tex]

Decrease: [tex]ReO_{4} ^- = Re[/tex]

Step 4: Adjust the charges in each half-reaction by including electrons.

Oxidation: [tex]5IO^- + 6H_{2} O = 5IO_{3} ^- + 12H^+ + 10e^-[/tex]

Lessening: [tex]ReO_{4} ^- + 8e^- + 4H^+ = Re + 4H_{2} O[/tex]

Step 5: Adjust the electrons within the two half-reactions by duplicating the oxidation half-reaction by 8 and the decrease half-reaction by 5.

[tex]40IO^- + 48H_{2} O = 40IO_{3} ^- + 96H^+ + 80e^-[/tex]

[tex]5ReO_{4} ^- + 40e^- + 20H^+ = 5Re + 20H_{12}O[/tex]

Step 6: Combine the two half-reactions and cancel out the electrons.

[tex]40IO^- + 5ReO_{4} ^- + 48H_{2} O = 40IO_{3} ^- + 5Re + 96H^+ + 20H_{2} O[/tex]

Learn more about oxidation here:

https://brainly.com/question/9496279

#SPJ4