C) These changes most likely resulted from a decrease in aggregate supply.
What results from a reduction in aggregate supply?The aggregate supply would decrease as a result of this reduction. In this model, the lower total stockpile could prompt interest surpassing result. Price is likely to rise as a result of that and the rise in production costs.
What influences the aggregate supply?Total stock is the labor and products created by an economy. It is driven by the following four production factors: natural resources, capital goods, labor, and entrepreneurship.
When aggregate supply falls, what happens to inflation?At the point when the total stock of labor and products diminishes on account of an expansion underway expenses, it brings about cost-push expansion. The increase in costs is passed on to customers as a way to make up for it, leading to an overall price increase: inflation.
To learn more about aggregate supply here:
https://brainly.com/question/29349235
#SPJ4
Mid City Products Inc. (MCP), developed standard costs for direct material and direct labor. In 2017, MCP estimated the following standard costs for one of their most popular products. Budgeted quantity Budgeted price Direct materials 4 pounds $7.25 per pound Direct labor 0.60 hours $17.00 per hourDuring September, MCP produced and sold 2,000 units using 8,200 pounds of direct materials at an average cost per pound of $7.00 and 1,160 direct labor hours at an average wage of $17.50 per hour. The direct labor efficiency variance during September is ________. $600 favorable $700 unfavorable $680 favorable $100 unfavorable
Answer:
See below
Explanation:
The below shows the calculation of variance
Budgeted direct labor (per unit) 0.60
Units 2,000
Budgeted direct total labor (hrs) 1,200
Actual hours 1,160
Standard rate $17
Direct labor efficiency variance
The direct labor efficiency variance
= (Budgeted hours - Actual hours) × Standard rate
= (1,200 - 1,160) × $18
= $720 favourable
Complete the journal entries for the following financing transactions.
a. A farmer deposits $350 from a garage sale of personal items into the farm checking account.
b. A farmer pays $100 for groceries with the farm checking account utilities of $65 for the farmer's house is paid with a check from the farm checking account.
c. A farmer culls his cow herd and sells the cows for $3,000 A farmer builds a shed for $7,000
Answer:
The answer is
Explanation:
The answer is ___, because
. All of the following are elements of the Keynesian economic framework EXCEPT
Answer:
1_multiplier
2_the laffer curve
3_the accelerator
4_the consumption
Bradford, Inc., expects to sell 11,000 ceramic vases for $21 each. Direct materials costs are $3, direct manufacturing labor is $11, and manufacturing overhead is $5 per vase. The following inventory levels apply to 2019: Beginning inventory Ending inventory Direct materials 1,000 units 1,000 units Work-in-process inventory 0 units 0 units Finished goods inventory 100 units 600 units On the 2019 budgeted income statement, what amount will be reported for sales
Answer:
$231,000
Explanation:
With regards to the above, the total sales would be;
= Number of units Bradford inc. Is expected to sell × Per unit of ceramic vases
Given that;
Units expected to be sold = 11,000
Per unit of ceramic vases = $21
Total sales
= 11,000 units × $21
= $231,000
Since we were asked to get the total sales, we will simply multiply the per units sold with the units expected to be sold. Other information are not useful for the purpose of calculating the total sales.
The following information is available for Yancey Company: Beginning inventory 600 units at $4 First purchase 900 units at $6 Second purchase 500 units at $7.20 Assume that Yancey uses a periodic inventory system and that there are 700 units left at the end of the month. Compute the cost of ending inventory and the cost of goods sold using the average-cost method.
Answer:
Ending inventory= $4,011
Explanation:
Giving the following information:
Beginning inventory 600 units at $4
First purchase 900 units at $6
Second purchase 500 units at $7.20
First, we need to calculate the weighted-average cost per unit:
Weighted-average cost per unit= (4 + 6 + 7.2) / 3
Weighted-average cost per unit= $5.73
Now, the ending inventory:
Ending inventory= 5.73*700
Ending inventory= $4,011
Kampus Corporation had the following eight investment transactions or events:
Jan 1 Purchased Argon Co. bonds for $10,000 cash. (Purchase is considered a short-term investment in available-for-sale (AFS) debt securities.)
Jan 3 Purchased 1,200 shares of Elmer, Inc. for $36,000 cash. (Purchase is considered a long-term stock investment with insignificant influence.)
Mar 31 Received cash dividend of $0.25 per share from Elmer, Inc.
Jun 1 Purchased 5,000 shares of Logan, Inc. for $60 per share. These shares represent a 40% ownership in Logan, Inc.
Sep 30 Received cash dividend of $2 per share from Logan, Inc.
Dec 31 Logan, Inc. reported net income of $150,000 for the year.
Dec 31 As of December 31, the Argon Co. bond had a fair (market) value of $12,000.
Dec 31 As of December 31, the Elmer, Inc. stock had a fair (market) value of $25 per share.
Required:
Prepare the journal entries Kampus Corporation should record for these transactions and events.
Answer:
Kampus Corporation
Journal Entries:
Jan 1 Debit Bonds Receivable (Argon Co.) $10,000
Credit Cash $10,000
To record a short-term investment in available-for-sale (AFS) debt securities.)
Jan 3 Debit Investments (Long-term) in Elmer, Inc. $36,000
Credit Cash $36,000
To record the long-term investment (1,200 shares of Elmer, Inc. at $30 each.)
Mar 31 Debit Cash $300
Credit Dividend Received $300
To record dividend received from Elmer's investment
($0.25 per share of 1,200 shares).
Jun 1 Debit Investment in Logan, Inc. $300,000
Credit Cash $300,000
To record the investment in 5,000 shares of $60 per share, representing a 40% equity ownership.
Sep 30 Debit Cash $10,000
Credit Investment in Logan, Inc. $10,000
To record dividend received from investment in Logan, Inc. ($2 per share of 5,000 shares).
Dec 31 Debit Investment in Logan, Inc. $60,000
Credit Retained Earnings $60,000
To record 40% share of the Net income of $150,000 in Logan, Inc.
Dec 31 No Journal Required: Argon Co. bond had a fair (market) value of $12,000.
Dec 31 Debit Unrealized Loss from Investment in Elmer, Inc. $6,000
Credit Investment in Elmer, Inc. $6,000
To record $5 lost in the (market) value of $25 per share.
Explanation:
a) Data and Analysis:
Jan 1 Bonds Receivable (Argon Co.) $10,000 Cash $10,000
a short-term investment in available-for-sale (AFS) debt securities.)
Jan 3 Investments (Long-term) in Elmer, Inc. $36,000 Cash $36,000 1,200 shares of Elmer, Inc. at $30 each.
Mar 31 Cash $300 Dividend Received $300
$0.25 per share of 1,200 shares.
Jun 1 Investment in Logan, Inc. $300,000 Cash $300,000
5,000 shares of $60 per share, represent a 40% ownership.
Sep 30 Cash $10,000 Dividend Received $10,000
$2 per share of 5,000 shares.
Dec 31 Investment in Logan, Inc. $60,000 Retained Earnings $60,000
40% share of the Net income of $150,000 in Logan, Inc.
Dec 31 No Journal Required: Argon Co. bond had a fair (market) value of $12,000.
Dec 31 Unrealized Loss from Investment in Elmer, Inc. $6,000 Investment in Elmer, Inc. $6,000 (market) value of $25 per share.
Marcelino Co.'s March 31 inventory of raw materials is $84,000. Raw materials purchases in April are $580,000, and factory payroll cost in April is $387,000. Overhead costs incurred in April are: indirect materials, $59,000; indirect labor, $28,000; factory rent, $32,000; factory utilities, $20,000; and factory equipment depreciation, $52,000. The predetermined overhead rate is 50% of direct labor cost. Job 306 is sold for $680,000 cash in April. Costs of the three jobs worked on in April follow:
Job 306 Job 307 Job 308
Balances on March 31
Direct materials $30,000 $41,000
Direct labor 23,000 16,000
Applied overhead 11,500 8,000
Costs during April
Direct materials 139,000 200,000 $115,000
Direct labor 103,000 150,000 104,000
Applied overhead ? ? ?
Status on April 30 Finished (sold) Finished (unsold) In process
Required:
a. Determine the total of each production cost incurred for April (direct labor, direct materials, and applied overhead), and the total cost assigned to each job (including the balances from March 31).
b. Prepare journal entries for the month of April to record the above transactions.
c. Prepare a schedule of cost of goods manufactured.
d. Compute gross profit for April
Answer:
Marcelino Co.a. The total of each production cost incurred for April:
Direct materials $454,000
Direct labor 357,000
Applied overhead 178,500
The total cost assigned to each job:
Job 306 Job 307 Job 308
Total cost of production $358,000 $490,000 $271,000
b. Journal Entries for the month of April:
Debit Work in Process:
Job 306 $139,000
Job 307 $200,000
Job 308 $115,000
Credit Raw Materials $454,000
To record the raw materials used in production.
Debit Work in Process:
Job 306 $103,000
Job 307 $150,000
Job 308 $104,000
Credit Payroll $357,000
To record the direct labor costs.
Debit Work in Process:
Job 306 $51,500
Job 307 $75,000
Job 308 $52,000
Credit Manufacturing Overhead $178,500
To record the applied overhead costs.
c. Schedule of Cost of Goods Manufactured:
Beginning Work in Process $129,500
Direct materials 454,000
Direct labor 357,000
Applied overhead 178,500
Total production costs $1,119,000
Less Ending Work in Process 271,000
Cost of goods manufactured $848,000
d. Gross profit for April:
Sales of Job 306 = $680,000
Cost of Job 306 = 358,000
Gross profit $322,000
Explanation:
a) Data and Calculations:
Beginning inventory:
Raw materials = $84,000
Cost incurred in April:
Purchases = $580,000
Factory payroll = $387,000
Overhead costs:
Indirect materials, $59,000
Indirect labor, $28,000
Factory rent, $32,000
Factory utilities, $20,000
Factory equipment depreciation, $52,000
Total overhead costs $191,000
Cash Sales of Job 306 = $680,000
Cost Sheet:
Job 306 Job 307 Job 308
Balances on March 31
Direct materials $30,000 $41,000 $71,000
Direct labor 23,000 16,000 39,000
Applied overhead 11,500 8,000 19,500
Beginning work in process $64,500 $65,000 $129,500
Costs during April
Direct materials 139,000 200,000 $115,000 454,000
Direct labor 103,000 150,000 104,000 357,000
Applied overhead 51,500 75,000 52,000 178,500
Total cost of production $358,000 $490,000 $271,000 $1,119,000
Status on April 30 Finished (sold) Finished (unsold) In process
Customer: An entity that describes a customer. An instance occurs for unique customers only using name, date of birth, and login name as customer_id primary key.
Online: An entity that describes a customer purchasing activity online. An instance occurs when the customer completes the transaction. Customers can purchase more than once.
Visits: An entity that describes a customer purchase in a physical store. An instance occurs if a customer makes or purchase or checks-in using an app. Customers can visit more than once per day.
Satisfaction: An entity that represents data from a recent customer satisfaction survey. An instance occurs when a customer takes the survey. A customer is tracked by login name and can only take the survey one time.
Use the information to match the following relationships. Answers can be reused more than once.
1. The relationship between Customer and Online.
2. The relationship between Customer and Satisfaction.
3. The relationship between Online and Visits.
4. The relationship between Visits and Satisfaction
A. prototype
B. one-to-one
C. Zero-sum
D. one-to-many
E. TOO many F. many-to-many.
Answer:
1. The relationship between customer and Online - One to one
2. The relationship between customer and Satisfaction - One to many
3. The relationship between online and visits - Many to many
4. The relationship between Visits and satisfaction - Prototype
Explanation:
The relation ship with customer is often one to one. The customers are required to fill the satisfaction surveys which enable the business to understand their value in the eyes of its customers and try to improve their level of service to their customers. The customer satisfaction is important for any business as the satisfied customer may bring more customers.
Saddle Inc. has two types of handbags: standard and custom. The controller has decided to use a plantwide overhead rate based on direct labor costs. The president has heard of activity-based costing and wants to see how the results would differ if this system were used. Two activity cost pools were developed: machining and machine setup. Presented below is information related to the company's operations.
Standard Custom
Direct labor costs $59,000 $112,000
Machine hours 1,380 1,110
Setup hours 101 370
Total estimated overhead costs are $309,000. Overhead cost allocated to the machining activity cost pool is $200,000 and $109,000 is allocated to the machine setup activity cost pool.
(a) Compute the overhead rate using the traditional (plantwide) approach.
(b) Compute the overhead rates using the activity-based costing approach.
(c) Determine the difference between the two approaches.
Answer:
Saddle Inc.
a) The overhead rate using the traditional (plantwide) approach is:
= $1.81 per direct labor cost.
b) The overhead rates using the activity-based costing approach:
Machining activity = $80.32
Machine setup activity = $231.42
c) The traditional approach overallocated total overhead by $515 than the activity-based approach.
Under the traditional approach, overhead allocated to the Custom product was $27,940 more than under the activity-based approach.
Similarly, under the activity-based approach, overhead allocated to the Standard product was $27,425 more than under the traditional approach.
The difference in the two being the overallocated overhead of $515 stated above.
Explanation:
a) Data and Calculations:
Estimated overhead costs = $309,000
Overhead allocated:
Machining activity = $200,000
Machine setup activity = $109,000
Standard Custom Total
Direct labor costs $59,000 $112,000 $ 171,000
Machine hours 1,380 1,110 2,490
Setup hours 101 370 471
Overhead rate using plantwide approach:
Total overhead/Total direct labor costs
= $309,000/$171,000 = $1.81 per direct labor cost
Overhead rates, using activity-based costing:
Machining activity = $80.32 ($200,000/2,490)
Machine setup activity = $231.42 ($109,000/471)
Overhead Allocation
Standard Custom Total
Plantwide $106,790 $202,720 $309,510
($59,000 * $1.81) ($112,000 * $1.81)
Activity-based:
Machining $110,842 $89,155 $199,997
(1,380 * $80.32) (1,110 * $80.32)
Machine setup 23,373 85,625 108,998
(101 * $231.42) (370 * $231.42)
Total costs $134,215 $174,780 $308,995
Difference $27,425 $27,940 $515
A mail-order house uses 16,025 boxes a year. Carrying costs are 46 cents per box a year, and ordering costs are $97. The following price schedule applies. Number of Boxes Price per Box 1,000 to 1,999 $1.35 2,000 to 4,999 1.25 5,000 to 9,999 1.15 10,000 or more 1.10 Click here for the Excel Data File a. Determine the optimal order quantity. (Round your answer to the nearest whole number.) b. Determine the number of orders per year. (Round your answer to 2 decimal places.)
Answer:
a. Optimal order quantity = 2,600 boxes
b. Number of orders per year = 6.16 orders per year
Explanation:
a. Determine the optimal order quantity. (Round your answer to the nearest whole number.)
D = Annual demand = 16,025
O = Ordering cost = $97
C = Carrying costs = 46 cents, or $0.46
Optimal order quantity = Economic order quantity = ((2 * D * O) / C)^0.5 = ((2 * 16,025 * 97 ) / 0.46)^0.5 = 2,600 boxes
b. Determine the number of orders per year. (Round your answer to 2 decimal places.)
Number of orders per year = Annual demand / Economic order quantity = 16,025 / 2,600 = 6.16 orders per year
Compute gross profit earned by the company for each of the four costing methods. For specific identification, the March 9 sale consisted of 80 units from beginning inventory and 340 units from the March 5 purchase; the March 29 sale consisted of 40 units from the March 18 purchase and 120 units from the March 25 purchase.
Explanation:
The solution can be made in tabular form as given below for better comprehension. This easily calculates gross profit for each of the four costing methods.
Particulars FIFO LIFO Avg cost Spec. ID
Sales 50900 50900 50900 50900
Cost of goods sold 31800 32920 32248 32540
Gross Profit 19100 17980 18652 18360
The goal of the accounts receivable methods is to adjust the Allowance for Doubtful Accounts balance so that multiple choice The unadjusted balance is equal to the estimate of the uncollectible accounts receivable. The adjusted balance is equal to the estimate of the uncollectible accounts receivable. The adjusted balance is equal to the estimate of the uncollectible sales. The unadjusted balance is equal to the ending accounts receivable balance.
Answer:
The adjusted balance is equal to the estimate of the uncollectible accounts receivable.
Explanation:
Receivable in economics is simply whenbusiness sells goods or services to another party on account usually on credit. It is also known as a monetary claim usually against a business or an individual.
Accounts receivable
Is simply defined as the power to the right to receive cash in the future from customers for goods or services performed. They can be called claim of right, exchange consideration, and a claim for the future.
The supplementary record that contains information on each customer is the accounts receivable ledger.
The goal for the accounts receivable methods is to adjust the Allowance for Doubtful Accounts balance making the adjusted balance is equal to the estimate of the uncollectible accounts receivable.
Suppose the elasticity of demand for tickets to Broadway shows is 2.0 for men and 0.3 for women. To use price discrimination to increase profits, the producers should charge lower prices to _____ because their demand is more _____. men; inelastic than that of women women; inelastic than that of men women; elastic than that of men men; elastic than that of women
Answer:
men; elastic than that of women
Explanation:
Price discrimination is when the same product is sold at different prices to customers in different markets
types of price discrimination
1. first degree price discrimination : here sellers charge each consumer at their willingness to pay in order to eliminate consumer surplus.
2. second degree price discrimination : here firms offer different prices depending on the quantity purchased. e.g. giving discounts for bulk purchases.
3, third degree price discrimination : firms charge different prices to different groups of customers. e.g. having a certain price for senior citizens, students
Price elasticity of demand measures the responsiveness of quantity demanded to changes in price of the good.
Price elasticity of demand = percentage change in quantity demanded / percentage change in price
If the absolute value of price elasticity is greater than one, it means demand is elastic. Elastic demand means that quantity demanded is sensitive to price changes.
Demand is inelastic if a small change in price has little or no effect on quantity demanded. The absolute value of elasticity would be less than one
Men have an elastic demand for tickets to Broadway shows
Women have an inelastic demand for tickets to Broadway shows
Since men have an elastic demand, if prices are reduced, the demand for tickets would increase and total profits of producers would increase
Imagine Two Households each with an income of $65,000 per year. Household A consists of two married individuals both 51 years old with one child who is now 27 years old and out of the house. Household B consists of two married individuals who are 31 years old and have three young children, two of which attend day care. The Government in implementing policies to effect Tax Fairness will concentrate on:
Answer: A. The Benefits Principle
Explanation:
According to the Benefits Received principle, people should pay taxes based on the benefits they receive from the government. This is how the government will effect tax fairness.
For example, Household B has three young children, two of which are in day care while Household A does not have any children at that age. Household A and Household B should therefore not pay the same when it comes to educational taxes. Household B should pay more and Household A should pay less because an educated society is beneficial to everyone but to them, only indirectly.
The government, when carrying out tax equity, will focus on the principle of benefits, as shown in option A.
We can arrive at this answer because:
The principle of benefits is considered whenever the government needs to determine the tax rate of citizens.This principle determines that people who use a particular social service must pay a higher tax rate than those who do not use that service.An example of this can be seen in the families presented above, since, in relation to the tax paid to promote national education, both families must be taxed, since the entire population benefits from this service.
However, family B benefits more from this service, as they have three children who need education promoted by the government, unlike family A, who has an adult child and who have already graduated.
According to the principle of benefits, both families must pay taxes for education, but family B must pay a higher tax than family A.
More information:
https://brainly.com/question/18756607?referrer=searchResults
Suppose the working age population of a fictional economy, Jessica Town, falls into the following categories: 100 are retired homemakers; 50 have full-time employment; 15 have part-time employment; 28 do not have employment but are actively looking for employment; and 16 would like employment but do not have employment and are not actively looking for employment. The official unemployment rate as calculated by the U.S. Bureau of Labor would equal:_________
Answer: 30.1%
Explanation:
The unemployment rate includes those who do not have employment but are actively looking for employment not those who do not have a job and are not looking.
The rate is also based on the Labor force which is the portion of the population that is able and willing to work. Retirees are not included in this measure. Those who are not looking are not willing.
Labor Force = 50 full-time + 15 part-time + 28 unemployed
= 93 people
Unemployment rate:
= 28 / 93 * 100
= 30.1%
The Gorman Group issued $930,000 of 11% bonds on June 30, 2021, for $1,009,794. The bonds were dated on June 30 and mature on June 30, 2041 (20 years). The market yield for bonds of similar risk and maturity is 10%. Interest is paid semiannually on December 31 and June 30. Required: 1. to 3. Prepare the journal entries to record their issuance by The Gorman Group on June 30, 2021, interest on December 31, 2021 and interest on June 30, 2022 (at the effective rate).
Answer:
The Gorman Group
Journal Entries:
June 30, 2021:
Debit Cash $1,009,794
Credit Bonds Liability $930,000
Credit Bonds Premium $79,794
To record the bonds issuance
December 31, 2021:
Debit Interest Expense $50,490
Debit Amortization of Bonds Premium $660
Credit Cash $51,150
To record the payment of semi-annual interest, including amortization of premium.
June 30, 2022:
Debit Interest Expense $50,457
Debit Amortization of Bonds Premium $693
Credit Cash $51,150
To record the payment of semi-annual interest, including amortization of premium.
Explanation:
a) Data and Calculations:
Face value of 11% bonds issue $930,000
Issue price = $1,009,794
Bonds premium = $79,794
Market yield = 10%
December 31, 2021:
Semi-annual interest payment = $51,150 ($930,000 * 5.5%)
Semi-annual Interest expense = $50,490 ($1,009,794 * 5%)
Amortization of bonds premium = $660
June 30, 2022:
Semi-annual interest payment = $51,150 ($930,000 * 5.5%)
Semi-annual Interest expense = $50,457 ($1,009,134 * 5%)
Amortization of bonds premium = $693
Full-time students at a particular university must have at least 12 credit hours, but may take up to 18 credit hours in a semester. A student is currently signed up for 15 credit hours. In deciding whether to add one more course to a fall semester schedule, which of the following is a marginal cost or benefit that will influence the student's decision?
Please choose the correct answer from the following choices, and then select the submit answer button.
a. the total number of semesters it will take to finish the degree if the student takes an additional class in each semester
b. the wages the student misses out on because the student has to quit a job to take any classes at all
c. the tuition bill for the semester
d. the additional technology fee that is paid per credit hour
Answer:
d. the additional technology fee that is paid per credit hour
Explanation:
Since in the question it is mentioned that the full time students should take minimum 12 credit hours but it would take maximum of 18 credit hours
Now the student signed up for 15 creditor hours and he wants to add one more so the marginal cost or benefit that can impact the decision of the students is that the extra technology fee that should be paid for per credit hour
Hence, the option d is correct
St. Augustine Corporation originally budgeted for $360,000 of fixed overhead at 100% of normal production capacity. Production was budgeted to be 12,000 units. The standard hours for production were 5 hours per unit. The variable overhead rate was $3 per hour. Actual fixed overhead was $360,000, and actual variable overhead was $170,000. Actual production was 11,700 units. The fixed factory overhead volume variance is a.$5,500 favorable b.$9,000 unfavorable c.$5,500 unfavorable d.$9,000 favorable
Answer:
YOUUUU TOOOOOO!!!!!!!!!!!!!!!!
Explanation:
Hi this man I was wondering if you had any time today I have a good morning sleep today and I’m just gonna be watching a movie for
What exactly allows individuals to consume more if they specialize and trade than if they don't
Answer:
They work within the company that allows them to do so. Vs. others that don't.
Explanation:
Hope this helps! plz mark as brainliest!
Livingston Fabrication has created the following aggregate plan for the next five months: August September October November December Forecasted Demand (units of finished goods): 1,500,000 1,500,000 2,000,000 3,000,000 500,000 Production Plan: 2,000,000 2,000,000 2,000,000 2,000,000 2,000,000 Assume that Livingston will have nothing in inventory at the end of July. Livingston employs 1,000 production assembly workers and it takes one production assembly worker 5 minutes to assemble one unit of finished good. (The unit is complete at that point.) Each production assembly worker can provide 150 hours of assembly time a month without requiring overtime pay. What will be ending inventory for the month of September?
Answer:
Livingston Fabrication
The ending inventory for the month of September is:
= 600,000 units.
Explanation:
a) Data and Calculations:
August September October November December
Forecasted Demand (units of
finished goods): 1,500,000 1,500,000 2,000,000 3,000,000 500,000
Production Plan: 2,000,000 2,000,000 2,000,000 2,000,000 2,000,000
Production capacity = 150 * 60 * 1,000 = 9,000,000 minutes
Minutes required by each assembly worker to assemble 1 unit = 5
Units that can be produced based on capacity = 1,800,000 units (9,000,000/5)
Schedule of Production, Sales, and Ending Inventory:
August September October November December
Beginning inventory 0 300,000 600,000 400,000 (600,000)
Units produced 1,800,000 1,800,000 1,800,000 1,800,000 1,800,000
Demand 1,500,000 1,500,000 2,000,000 3,000,000 500,000
Ending inventory 300,000 600,000 400,000 (600,000) 700,000
You are attending a training session on the principles that will help you do a better job of managing a new company-wide diversity program.. You are going through an exercise in which you are given two statements and asked to pick the one that effectively illustrates one of these principles.
Here is one set of statements:
Statement 1
Remember to keep looking for the ideal candidate for a position. Settling for an applicant that lacks all the skills necessary to perform a job, but adds to the diversity of your workforce, is not ideal.
Statement 2
You will be better able to increase the diversity of your workforce if you interview candidates with entry-level experience even though it might be ideal to hire someone with years of experience.
You should choose statement _________as the more appropriate strategy for managing diversity, since it is an example of_________.
You were unable td Statement 1 e training, but your coworker has offered to fill you in on the details that you missed. Identify which of the following statements your coworer to indicate as diversity principles discussed during your absence.
a. Surface-level diversity should not be treated as more important than deep-level diversity
b. Do not lower hiring standards to promote diversity in the workplace
c. Keep trying to accomplish as much as possible, even if implementing the diversity program becomes difficult.
Answer:
Managing a Company-wide Diversity Program
1. The statement that effectively illustrates a diversity principle is:
Statement 2
You will be better able to increase the diversity of your workforce if you interview candidates with entry-level experience even though it might be ideal to hire someone with years of experience.
2. You should choose statement ___2______as the more appropriate strategy for managing diversity, since it is an example of__managing high standards_______.
3. The statement that indicates one of the diversity principles discussed during your absence is:
a. Surface-level diversity should not be treated as more important than deep-level diversity.
Explanation:
Workplace diversity is an important current topic. Diversity encourages productivity, creativity, innovation, and increased customer service. Diversity ensures that our limited worldviews are expanded to include others who are not, and do not think, like us but are humans created in Love and Mercy, to work with us, to make the world a better place. In today's workplace, a diverse culture looks beyond the familiar-cultural boundaries to embrace diverse peoples without minding their sex, race, sexual orientations, education, and other human attributes.
Annual Income Statement Data Selected Year-End Balance Sheet Data Sales $ 50,000 Prepaid expenses increase $ 3,000 Expenses: Inventory increase 500 Cost of goods sold 30,000 Accounts payable decrease 1,000 Wages expense 10,000 Amortization expense 1,500 Net income $ 8,500 Prepare the operating activities section of the statement of cash flows for GreenGarden using the indirect method. (Amounts to be deducted should be indicated with a minus sign.)
Answer:
see calculation and working below
Explanation:
operating activities section
Net income $ 8,500
Adjust for changes in non- cash items :
Amortization expense $1,500
Adjust for changes in working capital :
Prepaid expenses increase ($ 3,000)
Inventory increase ($500)
Accounts payable decrease ($1,000)
Net Cash Provided by Operating Activities $5,500
1) Record the following transactions in the General Fund General Ledger of Benford Township using the consumption method (periodic inventory system) to account for materials, supplies, and prepayments. Record both the budget-ary and actual entries.
2) Compute the amount of expenditures to be reported in the school district General Fund statement of revenues, expenditures, and changes in fund balance.
3) Compute the amount of nonspendable fund balance to be reported at year end. Materials and supplies costing $90,000 were on hand at the beginning of the year. 1. The town ordered the following:
Estimated Cost
Garbage vehicles—4 . . . . . . . . . . . . . . . . . . . . . . . $225,000
Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312,000
2. The town received the garbage vehicles. The actual cost of $222,000 was vouchered for payment.
3. The town received most of the supplies ordered (estimated cost $302,000). The actual cost was $301,800.
4. The town paid $523,800 of vouchers payable.
5. At yearend, the town had supplies on hand costing $102,000.
Answer:
1)
1. Dr Encumbrances $537,000
Cr Reserve for Encumbrances $537,000
2. Dr Reserve for Encumbrances $222,000
Cr Encumbrances $222,000
Dr Expenditures – Capital Outlay - Trucks $222,000
Cr Vouchers Payable $222,000
3. Dr Reserve for Encumbrances $302,000
Cr Encumbrances $302,000
Dr Inventory – Materials and Supplies $301,800
Cr Vouchers Payable $301,800
4. Dr Vouchers Payable $523,800
Cr Cash $523,800
5. Dr Inventory -Materials and Supplies $12,000
Cr Expenditures – Materials and Supplies $12,000
2) $511,800
3) $102,000
Explanation:
1) To Record the transactions in the General Fund General Ledger of Benford Township using the consumption method and to Record both the budget-ary and actual journal entries.
1. Preparation of the journal entry if The town ordered Garbage vehicles of the amount of $225,000 and Supplies of the amount of $312,000
Dr Encumbrances $537,000
Cr Reserve for Encumbrances $537,000
($225,000+312,000)
2. Preparation of The journal entry if The actual cost of the amount of $222,000 was vouchered for payment.
Dr Reserve for Encumbrances $222,000
Cr Encumbrances $222,000
Dr Expenditures – Capital Outlay - Trucks$222,000
Cr Vouchers Payable $222,000
3. Preparation of the journal entry if The town received most of the supplies ordered (estimated cost of the amount of $302,000) while The actual cost was the amount of $301,800.
Dr Reserve for Encumbrances $302,000
Cr Encumbrances $302,000
Dr Inventory – Materials and Supplies $301,800
Cr Vouchers Payable $301,800
4. Preparation of the journal entry if The town paid the amount of $523,800 of vouchers payable.
Dr Vouchers Payable $523,800
Cr Cash $523,800
5. Preparation of the Journal entry if At year end, the town had supplies on hand costing the amount of $102,000
Dr Inventory -Materials and Supplies $12,000
Cr Expenditures – Materials and Supplies $12,000
($523,800-$511,800)
2) Computation for the amount of expenditures to be reported in the school district General Fund statement of revenues, expenditures, and changes in fund balance
EXPENDITURES
Capital Outlay $222,000
Materials and Supplies:
Beginning Inventory $90,000
Purchases$301,800
Total Available$391,800
Less Ending Inventory ($102,000)$289,800
($391,800-$102,000)
Total $511,800
($222,000+$289,800)
Therefore the amount of expenditures to be reported in the school district General Fund statement of revenues, expenditures, and changes in fund balance is $511,800.
3) Based on the information given we were told that At the end of the year the town had supplies on hand costing the amount of $102,000 which means that The amount of nonspendable fund balance to be reported at year end will equal to Inventory on hand of the amount of $102,000.
each time mayberry nursery hires a new employee, it must wait for some period of time before the employee can meet production standard. Management is unsure of the learning curve in its operations but it knows the first job by a new employees averages 40 hours and the second job averages 32 hours. assume all jobs to be equal in size. what is the learning curve percentage, assuming the incremental unit time learning model
Answer:
Learning percentage = 1.6%
Explanation:
Given - Each time may berry nursery hires a new employee, it must wait for some period of time before the employee can meet production standard. Management is unsure of the learning curve in its operations but it knows the first job by a new employees averages 40 hours and the second job averages 32 hours. assume all jobs to be equal in size.
To find - What is the learning curve percentage, assuming the incremental unit time learning model.
Proof -
First job = 40 hours
Second job = 32 hours
Now,
Job Job hours Cumm. of hours Incremental av. hours
1 40 40 40
2 32 72 64
Learning percentage = [tex]\frac{64}{40}[/tex] = 1.6%
1. Explain the concept of opportunity cost with an appropriate example.
Answer:
Concept & example of Opportunity Cost
Explanation:
Opportunity Cost is the cost of next best alternative foregone, while choosing an alternative. This arises because of 'choice' problem, due to unlimited wants & limited resources - having alternative uses.
Eg : If I can have 2 chapatis or a bowl of rice. And, I eat a bowl of rice. Then, 'opportunity cost' of a rice bowl is - the next best available '2 chapattis' foregone for the former.
Epsilon Co. can produce a unit of product for the following costs: Direct material $ 8 Direct labor 24 Overhead 40 Total costs per unit $72 An outside supplier offers to provide Epsilon with all the units it needs at $60 per unit. If Epsilon buys from the supplier, the company will still incur 40% of its overhead (this means that no matter what Epsilon does, 40% of the overhead costs will remain). Epsilon should choose to:
Answer:
It is cheaper to make the units in-house.
Explanation:
Giving the following information:
Make in-house:
Direct material $ 8
Direct labor 24
Overhead 40
Total costs per unit $72
Buying price= $60
We need to determine which option provides the lower cost. Because 40% of overhead will remain constant, we have to take it out of the equation.
Production cost:
Direct material $ 8
Direct labor 24
Overhead= 40*0.6= 24
Total production cost= $56
It is cheaper to make the units in-house.
Many new ventures focusing on craft beer have been launched. If the goal is to make a profit, perhaps it would have been a better choice to forget making the beer and instead focus on the hops market. There is competition for the available supply of hops, and this is especially true of the organic varieties. Cassidy Brewery uses standards to carefully track their costs. For their Hopalong label their standard for hops is 20 pounds per barrel and their standard rate is $13.00 per pound. In the past period they produced 40 barrels of their Hopalong beer using 830 pounds of hops. The hops had a cost of $15.00 per pound. Compute the total rate variance and the total efficiency variance for the past month. Also, for each variance, indicate whether the variance is favorable or unfavorable.
Answer:
a. Total rate variance = $1,660 Unfavorable
b. Total efficiency variance = $450 Unfavorable
Explanation:
From the question, we have:
Standard for hops = 20 pounds per barrel
Standard rate = Standard rate for hops = $13.00 per pound
Barrels of Hopalong beer produced = 40
Actual quantity = Actual pounds of hops used = 830 pounds
Standard quantity = Standard pounds of hops = Standard for hops * Barrels of Hopalong beer produced = 20 * 40 = 800 pounds
Actual rate = Actual cost of hops per pound = $15
Therefore, we have:
a. Compute the total rate variance for the past month
Total rate variance = (Actual rate - Standard rate) * Actual quantity = ($15 - $13) * 830 = $1,660 Unfavorable
The total rate variance of $1,660 is unfavorable because the Actual rate is greater than the Standard rate.
b. Compute the total efficiency variance for the past month
Total efficiency variance = (Actual quantity - Standard quantity) * Standard rate = (830 - 800) * $15 = $450 Unfavorable
The total efficiency variance of $450 is unfavorable because the Actual quantity is greater than the Standard quantity.
1.The IASB sets standards for:
a. The private sector
b. The public and private sectors
c.The public, private and not-for-profit sector
d. The private and not-for-profit sector
How do you construct a General Journal.
Creighton Bicycles and Repair conducted a survey and discovered that among customers who had tried both bike shops, its successful cross-town competition was preferred about 75% of the time. The most frequently cited reason was customer service. This information would be most helpful to introduce to employees during which stage of Lewin's change model
Answer:
Creighton Bicycles and Repair
This information would be most helpful to introduce to employees during Unfreezing stage of Lewin's change model.
Explanation:
The unfreezing stage is the best time to introduce information that challenges the status quo because it will help to prepare Creighton Bicycles and Repair employees to accept that change is inevitable. Creighton Bicycles and Repair should not be satisfied with 75% when it can attain 100% preference for its cross-town competition and other measurable indices. The unfreezing stage convinces organization people that things must change. This information cannot be introduced during the change stage or the refreezing stage.