suppose an unknown compound xy has an x-to-y mass ratio of 4.0. if decomposition of compound xy gives 20.0 grams of x, then how many grams of y must form?

The least energetic electrons are those in energy level I, also known as energy level K.Higher level electrons have more energy as you move away from the nucleus, and this energy increase is fixed and discrete.

Sharp, Principle, Diffuse, and F are the four you need to be aware of (fine or fundamental).So, s, p, d, & f.Only that many sublevels are contained in the Principal Energy Level (the number).

A 1s sublevel, which has a single orbital, is always the sublevel with the lowest energy.In its ground state, the hydrogen atom's lone electron will be located in the 1s orbital.As we move on to atoms containing multiple electrons, those additional electrons are added to the subsequent lowest sublevel, such as 2s, 2p, 3s, and so forth.

To know more about atom and electron visit:

https://brainly.com/question/13993867

#SPJ4

Answer: white light

Explanation:

because complementary colors... but dont expect the same thing to work with paint. obviously

Problem #8: A 5.00 L flask contains 3.00 g of mercury. The system is at room temperature of 25.0 °C. By how many degrees should we increase the temperature of the flask to triple the mercury vapor pressure. The enthalpy of vaporization for mercury is 59.11 kJ/mol?

Solution:

1) Let us use the Clausius-Clapeyron Equation:

with the following values:

P1 = 1    T1 = 298 K

P2 = 3    T2 = x

3) Set up equation with values:

ln (3/1) = (59110 / 8.31447) (1/298 minus 1/x)

1.0968 = 7109.2926 (1/298 minus 1/x)

1.0968 = 23.8567 minus 7109.2926/x)

x = 312.4 K = 39.4 °C

Answer:

this is ez 123

Explanation:

Answer:

Explanation:

About 3.5% of the weight of seawater is made up of dissolved salts because of the salinity, or salt concentration, of saltwater, which is 35 parts per thousand.

_________________

Hope this helps!

Have a great day!

Answer:

the Caribbean

Explanation:

Answer:

D.geothermal energy

Explanation:

The State of Nevada has abundant solar, wind, and biomass energy sources, but has more potential for geothermal energy production than any other state.

The products formed by this reaction are aluminium chloride and hydrogen gas is liberated.

Why is it necessary to balance a chemical equation?

Lets take the example of combustion of methange gas:

CH4 + O2 -----> CO2+ H2O

You can see that on the reactant side (left side) of the equation, there is one carbon atom, four hydrogen atoms, and two oxygen atoms if you count the number of atoms (subscripts) of carbon, hydrogen, and oxygen on both sides of the equation.

One carbon atom, two hydrogen atoms, and three oxygen atoms can be found on the product side (right side). As a result, the equation is unbalanced and does not comply with the rule of conservation of mass.

In order to balance the equation, we must adjust the amounts of the reactants and products, as necessary, by inserting coefficients in front of the appropriate formula(s).

CH4 + 2O2 -----> CO2+ 2H2O

When aluminium is reacted with hydrochloric acid, it gives aqueous solution of aluminium chloride and liberation of hydrogen gas is seen.

2Al(s) + 6HCl(aq)--------> 2AlCl3 (aq)+ 3H2(g).

To know more about hydrogen gas, click the link given below

https://brainly.com/question/25597694

#SPJ1

Assertion (A) : Slaking of lime is an exothermic and combination reaction. Reason (R ) : Quick lime reacts with water to produce slaked lime. Thus the correct answer is option A Both (A) and (R) are true and (R) is correct explanation of the assertion.

Slaking of lime, which is the process of adding water to quicklime to produce slaked lime, is an exothermic and combination reaction.

Quicklime, also known as calcium oxide, is a highly reactive substance that reacts with water to produce slaked lime, which is calcium hydroxide.

Therefore, The reaction is exothermic because it releases heat, and it is a combination reaction because it involves the combination of two substances to form a new compound. The reason given in (R) correctly explains the assertion in (A).

Learn more about Assertion from

https://brainly.com/question/26115325

#SPJ1

See full question below

Assertion (A) : Slaking of lime is an exothermic and combination reaction.

Reason (R ) : Quick lime reacts with water to produce slaked lime.

A

Both (A) and (R) are true and (R) is correct explanation of the assertion.

B

Both (A) and (R) are true but (R) is not the correct explanation of the assertion.

C

(A) is true but (R) is false.

D

(A) is false but (R) is true.

On the pH scale, the pH range for an acid is 0–7 and the pH range for a base is 7–14. pH 7 refers to a neutral solution. pH-7 pure water is a substance considered neutral.

This substance, which consists of a water molecule with a proton (H+) added, is an ion because it has a charge. It is known as the hydronium ion and has the formula H3O+. When an acid dissolves in water, the hydronium ion is always produced. Always interacting with the nearby water molecule to generate H3O+, the acid's H+.

For the detection of trace gases in the air, chemical ionization using proton-transfer reactions with hydronium ions (H3O+) is frequently used.

Learn more about ionization here:

https://brainly.com/question/1602374

#SPJ4

If a drop of carbonated water were placed on blue litmus paper, the color of the litmus paper will turn red.

Carbonated water is water that contains dissolved carbon dioxide gas, which may have been added to the water intentionally under pressure or may have occurred naturally as a result of geological processes. Carbonation creates tiny bubbles that make water effervescent. Club soda, sparkling natural water, and sparkling water created commercially are examples of soda water.

As soda water is an acidic solution, the blue litmus paper changes to a red color. This is because the carbonation process, in which CO₂ is bubbled into the water, results in the formation of carbonic acid, which then interacts with litmus paper.

You can also learn about carbonated water from the following question:

https://brainly.com/question/12860698

#SPJ4

Answer: nose

Explanation:sorry

Combination reaction of Carbon and Oxygen:

Carbon dioxide is created when carbon and oxygen react as follows:

C + O₂ → CO₂            (1)

The reactants, carbon (C) and oxygen (O), are on the left side of reaction (1) above. This process solely produces carbon dioxide (CO2) as a result of this reaction (on the right side of the reaction).

A direct combination reaction is one in which two or more substances (reactants) combine to create a single substance. It is sometimes referred to as a synthesis reaction (product). These processes are described by equations of form X + Y →XY (A+B→ AB). A combination reaction occurs when two or more components combine to form a single compound. In other terms, a combination reaction is a chemical reaction that occurs when two or more atoms or compounds react to create a single component.

Reactants are on left side of the arrow (tail)

Products are on right side of arrow (head).

Combination reaction of Carbon and Oxygen:

Carbon dioxide is created when carbon and oxygen react as follows:

C + O₂ → CO₂                (1)

The reactants, carbon (C) and oxygen (O), are on the left side of reaction (1) above. This process solely produces carbon dioxide (CO2) as a result of this reaction (on the right side of the reaction).

To refer more about Combination reactions visit:

https://brainly.com/question/15092182

#SPJ4

The importance of the use of hydrates in fire extinguishers are;

-They keep fire extinguishers dry during shipping and storage.

-They create foams that have high water content to help extinguish fires.

They create high pressure in the cylinder to quickly force out the fire r*tardant.

We know that a fire extinguisher has to do with any device that has been made in such a way that the device can be used to eliminate a flame that is burning. We all know that fore can be very destructive. This implies that it is important to be able to put out the fire so that it does not cause big problems.

The fire extinguisher is composed of certain chemical substances that are able to react together quickly and then be able to quench the flame of the reaction that is going on in the system.

Learn more about fire extinguishers:https://brainly.com/question/8822808

#SPJ1

18.0121 grams of CH₃OH must be added to water to prepare 225ml of a solution that is 2.5 m CH₃OH.

Molarity of the solution is defined as the number moles of the solute present in one liter of the solution. Molarity is calculated from the equation,

M = No. of moles of solute / Volume of the solution in terms of liter.

Volume of solution given is 225 ml. As molarity is expressed in moles per liter.

Volume of solution = 0.225 L

Calculate the mole of CH₃OH by the expression of molarity,

225ml × 2.5 mole/1000 ml = 0.562 moles of CH₃OH .

Now convert 0.175 moles by multiplying molar mass of the solution. So,

0.562 moles × 32.05g of CH₃OH /1mole CH₃OH = 18.0121 grams

The volume equals to 18.0121 grams of CH₃OH.

Learn more about Molarity from the link given below.

https://brainly.com/question/29566828

#SPJ4

What happens during a fission reaction is that matter is converted to energy.

We define the term fission as the kind of reaction that involves the breaking of the nucleus of an atom and then there would be a release of energy. There are various kinds of nuclear reactions that we have but the most common types of nuclear reactions are the fission and the fusion reaction.

In the fusion reaction we have the combination of two or more lighter nucleus so as to produce a heavier nucleus while in the case of the fission reaction the nucleus would have to be  broken up so that energy can be released in the process.

Thus, we see that the total mass on the left hand side may not be the same as the total mass on the left hand side because some of the mas is converted to energy.

Learn more about fission reaction:https://brainly.com/question/6572079

#SPJ1

Missing parts;

Which change occurs during a nuclear fission reaction?

(1) Covalent bonds are converted to ionic bonds.

(2) Isotopes are converted to isomers.

(3) Temperature is converted to mass.

(4) Matter is converted to energy

Orbits of electrons, -quantum energy emissions  and  -relationship between outer shell and chemical properties.

electron is a subatomic particle with a charge of sub-atomic electricity found in all atom and is the primary carrier of electricity in solid.

Neil Bohr was the first who explained that electrons moves around the nucleus in the separate orbits or shells in an atom. The properties of an element is determined by the number of electrons in outer shell. He also discovered that electrons can only be in a particular orbits of fixed energy and when electrons allowed to jump from one orbit to another, they absorbed or emitted electromagnetic radiation.

To know more about electron click-

https://brainly.com/question/25674345

#SPJ4

Complete Question
Select all that apply. The discoveries of Niels Bohr were:

- orbits of electrons

-charge on the electron

- quantum energy emissions

- static electricity

- relationship between outer shell and chemical properties

According to the Gay-Lussac's law, as the container is heated that is as temperature increases pressure also increases as they are directly proportional to each other.

Gay-Lussac's law is defined as a gas law which states that the pressure which is exerted by the gas directly varies with its temperature and at a constant volume.The law was proposed by Joseph Gay-Lussac in the year 1808.

The pressure of the gas at constant volume reduces constantly as it is cooled till it undergoes condensation .The nature of  graph of pressure versus temperature is linear.

Learn more about Gay-Lussac's law,here:

https://brainly.com/question/2683502

#SPJ1

Balanced chemical equation:

[tex]3 Ba(NO3)2 (aq) + 2 K3PO4 (aq) ----- > 6 KNO3 (aq) + Ba3(PO4)2(s)[/tex]

What is double-displacement reaction?

In an aqueous solution, a double-displacement reaction takes place when the positive and negative ions of two ionic compounds exchange positions to form two completely different compounds.

Chemical formula for :

Barium nitrate---> Ba(NO3)2  (aq)

Pottasium Phosphate = K3PO4 (aq)

Reaction between these two is a type of double displacement type reaction in which ions are exchanged , forming

Pottasium Nitrate -----> KNO3 (aq)

Barium Phosphate -----> Ba3(PO4)2 (s)

(aq) means the phase is aqueous and (s) means phase is solid or the compound precipitated out .

Now, writing the molecular formula using the above data , we get:

[tex]Ba(NO3)2 (aq) + K3PO4 (aq) ------ > KNO3 (aq) + Ba3(PO4)2 (s)[/tex]

A equation is called balanced when number of chemical species are same on both sides of the equation .

Here, in product side there are 3 Ba and 2 (PO4) and only 1 Ba and 1 PO4 in reactant side to balance this let's multiply

2 with K3PO4 on reactant side and ,

3 with Ba(NO3)2 on reactant side

The equation thus becomes:

[tex]3 Ba(NO3)2 (aq) + 2 K3PO4 (aq) ------ > KNO3 (aq) + Ba3(PO4)2 (s)[/tex]

Now,

There are 6 K atoms on reactant side to balance this let's multiply 6 with KNO3 in product side by doing so we also balanced NO3.

Consequently, the balanced chemical equation is

3 Ba(NO3)2 (aq) + 2 K3PO4 (aq) ----- > 6 KNO3 (aq)  + Ba3(PO4)2(s)

To learn more about double displacement reaction from the given link.

https://brainly.com/question/23918356

#SPJ1

The above assertion claims that the emperical formula for enargite is Cu3AsS4.

The simple whole number proportion of atoms in a compound is the empirical formulae of a chemical in chemistry. No information on the arrangement or quantity of atoms is provided in an empirical formula.

If we use 100 grams of enargite:

n(Cu) = 48,41 g ÷ 63.55 g/mol.

n(Cu) = 0.761 mol.

n(As) = 19.02 g ÷ 74.92 g/mol.

n(As) = 0.254 mol.

n(S) = 32.57 g ÷ 32.065 g/mol.

n(S) = 1.016 mol.

n(Cu) : n(As) : n(S) = 0.761 mol : 0.254 mol : 1.016 mol / 0.254.

n(Cu) : n(As) : n(S) = 3 mol : 1 mol : 4 mol.

To know more about empirical formula visit:

https://brainly.com/question/14044066

#SPJ4

It is discovered that an unidentified metal crystallizes in a body-centered cubic lattice and has a density of 7.8748 g/cm3. The unit cell's edge measures 0.28664 nm.

A body-centered cubic unit cell with an edge length of 287 pm forms during the crystallization of iron metal. 287 p m . Iron has a molar mass of 55.85 gmol (1.85 gmol) and a density of 7.86 gcm (3.86 g c m)

Consequently, the formula for obtaining 7.97 g of iodine is: = 789.4 g x 7.97 g / 761.4 of NI3 = 6291.518 / 761.4 of NI3 = 8.26 g of NI3 Hence Grams.

To know more about density visit1:-

https://brainly.com/question/15164682

#SPJ4

Answer:

C. You have two times the number of particles that are in 12 grams of carbon-12.

Explanation:

Avogadro's number, 6.022 ×10^23, equals the number of particles in 12 grams of carbon-12.

This mean 1 mole of a substance will equals to the number of particles that are in 12 grams of carbon-12.

Therefore, 2 moles of a substance will equals to two times the number of particles that are in 12 grams of carbon-12.

Answer:

grass

Explanation:

only the grass would actively have photosynthesis occur. frogs and honeybees do not use photosynthesis to produce "food". tree trunks are not the part of the organism that performs photosynthesis.

Answer: Grass!

Explanation: Grass produces food for itself through a process called photosynthesis, Just like trees. Leaves soak up light  Thats what the word photo means In "Photosynthesis" And then the light soaked up from the leaves and a chemical occurs called chlorophyll

Both energy and mass can enter or exit a closed system. The correct option to this question is D.

For more information on closed system kindly visit to

https://brainly.com/question/3730360

#SPJ1

Gel -electrophoresis is used to separate mixture of proteins, and other organic compounds based on their charge, size or shape but not by color.

Gel electrophoresis is used to separate combinations of DNA, RNA, or proteins based on their molecular sizes. In gel electrophoresis, the molecules that need to be separated are forced through a gel that has tiny pores by an electrical field.

The speed at which the molecules move through the pores in the gel is inversely proportional to their size. This indicates that a smaller molecule will move through the gel further than a larger the molecule.

However, gel electrophoresis  does not involve a separation based on the color of the compounds. Thus, option a is correct.

To find more on gel-electrophoresis, refer here:

https://brainly.com/question/9437877

#SPJ1

The highest lattice energy among the given compounds is for MgO. The increasing order of lattice energy for these compounds is NaBr <NaCl< CaCl₂ < MgO.

Lattice energy of a compound is the energy required to convert one mole of the compound into its constituent ions in gaseous states. Lattice energy increases with decrease in size and increase in charge.

Thus, compound containing smaller ions with higher charges are having greater  lattice energy. Both Mg and oxygen are smaller in size and have  charges of +2 and -2 respectively. Na and Ca are bigger than Mg.

Ca2+ is smaller and greater in charge than Na+. Among NaCl and NaBr, Cl is smaller compared to Br thus NaCl has higher lattice energy.

Therefore, the increasing order of lattice energy is NaBr <NaCl< CaCl₂ < MgO.

To find more on lattice energy, refer here:

https://brainly.com/question/29441166

#SPJ1

The statement "Both the samples contain same number of atoms" is False.

The statement "both samples have the same mass in grams" is False.

The statement "both samples contain 6.022 x 1023 atoms " is False.

The statement "both samples contain 6.022 x 1023 particles (molecules or atoms)" is True.

The statement "the sample of 1.0 mole of cl2 weighs more than the sample of 1.0 mole of Ca" is True.

The number of atoms in both the case are :

Ca : 1 mole : 6.022 * 10^23 atoms

Cl2 : 1 mole : 2 * 6.022 * 10^23 atoms : 12.044 * 10^23 atoms

Weight of 1 mole of Cl2 : 70 g

Weight of 1 mole of Ca : 40 g

These Values are enough to justify the above True/False Statements.

To know more about mass and moles relation :

brainly.com/question/29964498

#SPJ4

The answer for the percentage yield is 80%.

What is percentage yield?

Recovery is the ratio of actual recovery to theoretical recovery. It is calculated by dividing the experimental yield by the theoretical yield and multiplying by 100%. If the actual and theoretical yields are equal, the yield rate is 100%. Yields are usually less than 100% because actual yields are often lower than theoretical. This may be due to incomplete or competing reactions and sample loss during recovery. Recoveries can exceed 100%. This means that more samples were recovered from the reaction than expected. This can occur when other reactions that form the product occur. Another potential source of error is overage caused by incomplete removal of moisture or other contaminants from the sample. Yield is always positive.

Therefore, The answer for the percentage yield is 80%.

To know more about percentage yield, visit:

https://brainly.com/question/14714924

#SPJ1

a. Decrease water reabsorption : decrease blood pressure.

b. Decrease peripheral resistance : decrease blood pressure

c. Vasodilation : decrease blood pressure

d. Decrease salt intake : decrease blood pressure

e. Decrease blood volume : decrease blood pressure

f. Vasoconstriction : increase blood pressure

g. Increase peripheral resistance:  increase blood pressure

h. Increase salt intake:  increase blood pressure

i. Increase blood volume : increase blood pressure

j. Increase water reabsorption: increase blood pressure

Total peripheral resistance: This phrase describes the obstruction to blood flow that the vascular system presents. The contact between the blood and the vessel's walls causes this resistance. It is, in other words, the vessels' resistance to blood flow. The sum of all the gruesome circuit resistances in the body is the total peripheral resistance. Total peripheral resistance rises as a result of mechanisms that cause vasoconstriction, while total peripheral resistance falls as a result of mechanisms that cause vasodilation.

Blood pressure:

This phrase describes the force that the blood exerts when it flows against the vessel walls. The volume and strength of the blasted blood as well as the vessel's size and suppleness all affect this pressure. Continuous blood pressure variations are caused by factors such as activity, temperature, nutrition, and emotional state.

Complete question:

Very small changes in the solute concentrations in the various fluid compartments cause water to move from one compartment to another, which alters blood composition and blood pressure. How do the following physiological changes affect blood pressure?

a. Decrease water reabsorption

b. Decrease peripheral resistance

c. Vasodilation

d. Decrease salt intake

e. Decrease blood volume

f. Vasoconstriction

g. Increase peripheral resistance

h. Increase salt intake

i. Increase blood volume

j. Increase water reabsorption

To learn more about blood pressure visit: https://brainly.com/question/4215574

#SPJ4

The number of protons, neutrons, and electrons that iron (Fe) have if it has a +4 charge are 26, 29 and 22 respectively.

Atomic number of an element is the number of protons in the atom of that element. The number of protons of a neutral atom i.e. charge 0 is equal to the number of electrons.

Iron is a metallic chemical element having atomic number 26 and symbol Fe. Since the atomic number is 26, the number of protons is 26.

If the charge of the iron is +4, this means that the number of protons will be 26 while the number of electrons will be 22. The number of protons will be 55 - 26 = 29.

Learn more about proton number at: https://brainly.com/question/28992636

#SPJ1