Answer: i dont know
Explanation:
E
Help!!!!!!!!!!!!!!!!
Answer:
_Sorrrrry_ I can't help u_
Một ô tô khối lượng một tấn chuyển động nhanh dần đều trên một đường bằng, hệ số ma sát giữa bánh xe và mặt đường là 0,1. Lực kéo của động cơ ô tô bằng 1200 N. Lấy g = 10 m/s2. Thời gian cần thiết để ô tô đạt được tốc độ 36 km/h từ trạng thái nghỉ là bao nhiêu?
A device that absorbs and draws heat from a hot object, dispersing it into the
surroundings, is which one of the following?
A. Heat sink
B. Piston
C. Heat engine
D. Internal combustion engine
Answer:
A. Heat sink
Explanation:
Neutrons are found in what part of an atom ?
4word puzzle about sounds waves down
An airplane travels 2400 km at a speed of 600 km/h, decreases its speed to 400 km/h for the next 1200 km and travels the last 2,500 km at a speed of 500 km/h.
Problem 1, Question 1: What is the total travel time?
Total time:
Problem 1, Question 2: Find the average speed of the plane for the trip.
Average speed:
help :D
If we were to make water (H20) based on the Key Provided above,what would the water molecule look like
Answer:
Individual H2O molecules are V-shaped, consisting of two hydrogen atoms (depicted in white) attached to the sides of a single oxygen atom (depicted in red). Neighboring H2O molecules interact transiently by way of hydrogen bonds (depicted as blue and white ovals).
HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE
[tex]A_x = 5.0[/tex]
[tex]A_y = -6.3[/tex]
Describe a real life situation in which you have experienced Newtons First Law. Use the words “unbalanced force” and “inertia” in your answer
Plz help
Answer: Options that describes first law of motion from the question are;
An overall net force must be applied to an object before it can move.
Newton’s first law of motion is also known as the law of inertia.
Newton’s first law applies to an object whether it is moving or not.
Newton's first law states can be regarded as law of inertia. it made us to understand that when a body is resting then it keeps the rest unless there is external force been acted on it or if the body is moving at a constant speed, it will continue until there is external force acted.
A body will move from its resting only when net force is applied.
Example of this law is seen in when someone is sitting in a car putting on the seat belt.
This law applies to moving object as well as static object.
Therefore, option B,C and E right.
Explanation:
Answer: I would say like if a person jumps out of a moving vehicle, he falls forward due to inertia of motion. One example of Newton's first law in real life is, when you are walking with a glass filled with water, you will notice that the water spills at certain locations when you walk at faster pace.
Explanation:
A diagram is drawn showing a swing set with a swing pulled backward prior to release. The diagram shows how the swing will move forward and then backward after it is initially released. At which point in the diagram is all of the energy gravitational potential energy?
A) as the released swing begins moving backward
B) at the highest point as the swing moves forward
C) when the swing is pulled back prior to release
D) just after release of the swing
Answer:C) When the swing is pulled back to prior release
Explanation:
This question involves the concepts of the law of conservation of energy, gravitational potential energy, and kinetic energy.
All of the energy is gravitational potential energy at "C) when the swing is pulled back prior to release".
The law of conservation of energy states that at any point the total energy of the swing must be constant, which means:
Total Energy = Gravitational Potential Energy + Kinetic Energy = Constant
It is clear that the swing has a non-zero speed in all given situations except the situation in part C), where the swing is at rest before release. Since the kinetic energy exists due to motion in the object. Hence, the kinetic energy will be zero when the swing is pulled back prior to release. It means all the energy in the swing at this time will be the gravitational potential energy.
Learn more about the law of conservation of energy here:
brainly.com/question/20971995?referrer=searchResults
The attached picture explains the law of conservation of energy.
Once you start pulling your object With less force than friction, what should you expect your object to do? What about when your object is pulled with more force than friction?
#Case -1
If Pulling force is less than frictional force the object won't move .
#Case-2
If Pulling force is greater than frictional force then object will be .
In order to calculate friction force you need Limiting friction first .
[tex]\\ \sf\longmapsto F_L=\mu sN[/tex]
u s is coefficient of static friction and N is normal reactionWhich of the following correctly identifies the relationship between the immune system and the integumentary system (skin, hair, & nails)?
A
The body releases solid, liquid, and gas pathogens
B
Mucus in the mouth, nose, trachea, and lungs captures pathogens
C
Bones create white blood cells
D
Hydrochloric acid in the stomach dissolves pathogens that are ingested
E
Blood carries white blood cells around the arteries, veins, and capillaries
F
The skin is the body's first physical barrier, hairs in the nose filter air as it enters the body, pores in the skin release toxins and pathogens
Answer:
F - The skin is the body's first physical barrier, hairs in the nose filter air as it enters the body, pores in the skin release toxins and pathogens
describe how heat energy can be transferred to either kinetic energy or gravitational potential energy
Answer:
Potential energy can transfer into other forms of energy like kinetic energy. Kinetic energy is energy an object has because of its motion. ... If released, as the ball moves faster and faster toward the ground, the force of gravity will transfer the potential energy to kinetic energy.
On a microscopic scale, conduction occurs as rapidly moving or vibrating atoms and molecules interact with neighboring particles, transferring some of their kinetic energy. Heat is transferred by conduction when adjacent atoms vibrate against one another, or as electrons move from one atom to another.
In steam engine , pistons remove some heat energy from hot gases and then uses these moving pistons to power the device attached that is hooked up . This is how heat energy can be converted to kinetic energy.
Heat engine with their thermal energy can lift up weights or pumping water to a certain height is an example that how thermal energy can be used to move an automobile to higher altitude .
What is Heat/Thermal energy ?
Heat energy is the result of the movement of tiny particles called atoms, molecules or ions in solids, liquids and gases. Heat energy can be transferred from one object to another.
In steam engine , pistons remove some heat energy from hot gases and the steam engine then uses these moving pistons to power the device attached that is hooked up . This is how heat energy can be converted to kinetic energy.
Similarly heat engine with their heat energy can lift up weights or pumping water to a certain height is an example that how heat energy can be used to move an automobile to higher altitude.
learn more about heat energy
https://brainly.com/question/14505067?referrer=searchResults
#SPJ2
what happens to the cereal underneath the clear container when it's near a wool?
Answer:
they can't breath and they gon dead
Explanation:
yum yum yum yum yum
Answer:
the answer is in my mind but not coming in the mouth I'll tell you when I remember ''sorry ''
A 200 kg object is pulled up an incline plane that has friction as the picture above shows. The object is pulled at a constant velocity. Calculate the tension on the rope.
A. 897 N
B. 936 N
C. 852 N
D. 978 N
Explanation:
the force to pull or push the block upwards (with the rope being parallel to the inclined plane) with 0 acceleration (moves with constant velocity) and therefore the tension on the rope is
Ft = m×g×sin(angle) + y×m×g×cos(angle)
force of gravity force of friction
down (down)
m = the mass of the object = 200kg
g = Earth's gravity acceleration = 9.8m/s²
y = the Greek letter mu, the coefficient of friction (it does not say "static" or "kinetic", I assume kinetic because the object is moving with a constant velocity, but it does not matter here) = 0.05
angle = 25 degrees
the result is N (Newton).
so, let's put the numbers into the equation and calculate :
200×9.8×sin(25) + 0.05×200×9.8×cos(25) =
≈ 828.33 N + 88.82 N ≈ 917.15 N
the closest answer option is B (936 N).
I don't know why there is this difference.
If a person has an acceleration of -1.5 m/s/s, then after 3.0 s thier velocity will have changed by m/s. If the initial velocity of the person was 2.0 m/s, then their new velocity is m/s. The initial velocity was in the direction and their final velocity was in the direction, so this person must have turned around during the 3.0 s. The average velocity of the person during the 3.0 s was m/s so their change in position during the 3.0 s must have been m. However, the distance the actual distance they covered was than their change in position because they changed direction.
If the person's initial position was 2.0 m, then their final position will be _____________ m.
Answer:
-1.5 m/s/s + (3.0 s + 2.0 m/s) = -7.5 m/s/s
-7.5 m/s/s x 3.0 s × 3.0 s × 3.0 s = - 202.5
Một lò xo nhẹ, treo thẳng đứng có độ cứng k = 100 N/m. Vật nhỏ khối lượng m = 500 g được treo vào đầu dưới của lò xo, dao động điều hòa quanh vị trí cân bằng O. Tính lực đàn hồi của lò xo khi vật trên vị trí cân bằng 9 cm, lấy g = 10 m/s2 .
Answer:20
Explanation:
You have discovered a planet that is one-quarter the radius of Earth (Rp = 1/4R⊕) and one-half as massive (Mp = 1/2M⊕). How does the gravity on the surface of this planet compare to the gravity on the surface of Earth (Fgp = XFg⊕)?
The new planet has the radius of only 1/4th of earth and mass of half that of earth. Then , the gravity on the surface of the new planet will be8 times higher than that of earth.
What is gravitational force?The gravitational force is the force by which an object attracts other object into its center of mass. Earth attracts every objects on ots surface to the ground by gravitation.
The force of gravitation is directly proportional to the mass and inversely proportional to the distance or radius of the planet.
g = G m/r²
Where G is the universal gravitational constant.
The new planet has the mass half of that of earth (me) and radius 1/4th of earth.
gn = G me/2 (re/4)²
= G 16 me/2
= 8 ge
Where ge is the gravity by earth and gn that of new planet. The gravitational force of the new planet will be 8 times greater than that of earth.
Find more on gravitational force:
https://brainly.com/question/12528243
#SPJ2
1. Can you give an example of any energy transformation where there is no
dissipation of energy?
Answer:
The notable examples are metal bearings, with occasional lumps on the otherwise smooth surfaces catching against each other, and the flow of an electric
Conversions of Kinetic energy to and from potential energy in vacuum converts with very little loss. If you throw a rock up against gravity in a vacuum, that rock will reach a potential energy that is almost exactly equal to the initial kinetic energy. When the rock reaches its peak and comes back down, its kinetic energy will be almost exactly the same when it reaches the original altitude.
A 10-kg box is being pulled across the table to the right at a constant speed with a force of 50N, directed 30 degrees below the horizontal.
a.) Calculate the force of friction acting on the box.
b.) Calculate the normal force acting on the box.
Answer:
Explanation:
Assuming the table is horizontal
As speed is constant, friction must exactly balance the horizontal component of the applied force
Ff = 50cos30 = 43 N
The normal force must oppose both the weight of the box and the vertical component of the applied force.
N = 10(9.8) + 50sin30 = 123 N
The frictional force can be calculated with the angle and mass of the moving body and the normal force acting on it. The normal force on the body is 98 N and the frictional force is 7.712 N.
What is friction?Friction is the resistance to the movement of a body. If the motion is in a frictionless path then the body will moves in a constant speed in a straight line.
The normal force is the product of mass of the body and gravity 9.8. Then the frictional force can be calculated by the equation with of friction as follows:
Frictional force = F × cos ∅
is the angle.
Thus frictional force = 50N × cos 30
= 7.712 N
The normal force F = m × g
= 10 Kg × 9.8 m/s²
= 98 N.
Therefore, the normal force acting on the body moving with a constant speed and constant force 50 N and horizontal angle 30 degree is 98 N and the frictional force is 7.712 N.
To find more about friction, refer the link below:
https://brainly.com/question/28356847
#SPJ2
A car moving at 8.5 m/s crashes into a tree and stops in 0.32 s. Calculate the magnitude of the force, in newtons, the seatbelts exerts on a passenger in the car to bring him to a halt. The mass of the passenger is 66.5kg.
Answer:
Explanation:
I=Q2- Q1
And I = F. (t2-t1)
t = 0,32s
v = 8,5 m/s
Q = m.v
Q=66,5.8,5 = 565,25 kg.m/s
F. (t2-t1) = 565,25
F.0,32 = 565,25
F = 1766,4 N
While on her concert tour in the US, my Austrian friend Andrea brought along a small electric
fabric-steamer. The steamer draws a current of 4.2 A on a 220 V line in Austria. If she plugged it
into an electrical line in the US, where the household voltage is 110 V, how much current would
the steamer draw? How well do you think it will perform?
Answer:
A battery connected to a 140 resistor dissipates 17W of power. If the circuit contains only the battery and the resistor, what is the voltage of the battery?
Explanation:
When Beakman lets go of Liza and she starts moving her stored _____ changed into ____ energy.
A. moving / stopped
B. potential / kinetic
C. stopped / moving
D. kinetic / potential
Explain the
difference between an
oxygen atom and a carbon atom
Answer:
Carbon atoms are made up of 6 protons, 6 electrons, and 6 neutrons, whereas Oxygen atoms are made of 8 protons, 8 neutrons, and 8 electrons.
Explanation:
This may not sound like a big difference at the atomic level, but it is responsible for all of the differences between Oxygen and Carbon.
2
Ca
+
O
2
→
2
CaO
What is the product of the reaction
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The product in a chemical reaction is written on the Right side of the arrow, so
the product formed here in given reaction is :
CaO (Calcium Oxide)The stability of a nucleus is based not on the binding energy but on the binding energy per ____________.
A. Neutrino
B. Proton
C. Electron
D. Nucleon
Assertion: An object will continue moving uniformly on a plane frictionless surface till the resultant force acting on it is Not Zero. Reason: The bodies do not change their state of Rest or uniform motion unless an external unbalanced force acts on it
A body continues in its state of rest until it is acted upon by an unbalanced external force.
According to Newton's first law of motion, the reason for motion is the action of unbalanced forces. A body will continue in its state of rest or uniform motion unless it is acted upon by an unbalanced external force. This law also referred to as the law of inertia.
Hence, an object will continue moving uniformly on a plane friction-less surface till the resultant force acting on it is not zero according to this law. Thus, the reason is an explanation for the assertion.
Learn more: https://brainly.com/question/3715235
An airplane makes a gradual 90 turn while flying at a constant speed of 200 m/s. The process takes 20.0 seconds to complete. For this turn the magnitude of the average acceleration of the plane is
Answer:
Explanation:
The plane travels a distance of 200 m/s(20.0 s) = 4000 m
A 90° turn is π/2 radians
4000 = (π/2)R
R = 8000/π m
a = v²/R = 200²/8000/π = 5π m/s² ≈ 15.7 m/s²
When a airplane makes the graduall 90 turn at constant speed the average acceleration is 14.14 m/s.
What is acceleration?Acceleration equals the change in velocity. The rate of change of velocity per unit time is called acceleration. The unit of acceleration is m/s². It represents the speed of the object along with direction.
Acceleration(a) = dv/dt, dv represents change in velocity and dt represents change in time. Velocity is defined as rate of change of position with time. Acceleration has both magnitude and direction and it is a vector quantity.
Acceleration is of two types- Instantaneous acceleration and average acceleration. Instantaneos acceleration gives the acceleration at that instant where as the average acceleration is obtained by rate of change of velocity with elapsed time.
Average acceleration = Δv / Δt. Δv is the change in velocity and Δt is the elapsed time.
From the given,
An airplane makes 90° turn,
v₁ = 200 i^ (before 90 turn)
v₂ = 200 j^ (after 90 turn)
Δt = change in time
Average acceleration = Δv / Δt
= v₂ - v₁ / 20
= 200 i^ - 200 j^ /20
avg.acc = 10(-i) + 10 (j)
| avg.acc | = √ 10(-i) + 10 (j)
= √2×10
= 14.14 m/s²
Hence, the average accleration is 14.14 m/s².
Learn more about the average acceleration :
https://brainly.com/question/27184422
#SPJ2
is the answer 1.05m?? help me please. i just want to confrim my answer :3
a student whose mass is 60kg runs up a height of 7.2m in 10.4 seconds find the power used by the student. (g=g.8m/s)
Answer:
p = w/t = mgh/t = 60kg*7.2m*10.4sec/10.4 = 432 watt