The oxidation half-reaction is: Ca → Ca²⁺ + 2e⁻, and the reduction half-reaction is: O₂ + 4e⁻ → 2O²⁻.
To write balanced half-reactions describing the oxidation and reduction that happen in this reaction, we need to examine the changes in oxidation states for the elements involved.
Oxidation half-reaction:
In this half-reaction, calcium (Ca) loses electrons and is oxidized. The oxidation state of calcium changes from 0 in its elemental form to +2 in calcium oxide (CaO).
Ca → Ca²⁺ + 2e⁻
Reduction half-reaction:
In this half-reaction, oxygen (O) gains electrons and is reduced. The oxidation state of oxygen changes from 0 in its diatomic form (O2) to -2 in calcium oxide (CaO).
O₂ + 4e⁻ → 2O²⁻
To balance the overall reaction, we need to multiply the oxidation half-reaction by 2 to account for the 2 moles of calcium:
2(Ca → Ca²⁺ + 2e⁻)
Now, the balanced full reaction is:
2Ca + O₂ → 2CaO
In summary, the oxidation half-reaction is: Ca → Ca²⁺ + 2e⁻, and the reduction half-reaction is: O₂ + 4e⁻ → 2O²⁻.
Know more about oxidation and reduction - brainly.com/question/13182308
#SPJ11
arrange the following solvents by polarity (least to most polar): water, acetone, isopropanol, ethanol, and toluene
These solvents are arrange by polarity from least to most polar. The order is as follows: toluene, acetone, isopropanol, ethanol, and water.
The solvents arranged from least to most polar are: toluene, acetone, ethanol, isopropanol, and water.
A polar aprotic solvent is a solvent that lacks an acidic proton and is polar. Such solvents lack hydroxyl and amine groups. In contrast to protic solvents, these solvents do not serve as proton donors in hydrogen bonding, although they can be proton acceptors. These solvents are able to dissolve both types of substances because they have a partially positive end (the polar part) and a partially negative end (the aprotic part), which allows them to interact with both types of molecules.
Visit here to learn more about polarity : https://brainly.com/question/13468845
#SPJ11
QUESTION 4 10 points Save Answer What is the kw of pure water at 53.2°C if the pH is 7.1? Enter your answer in scientific notation using "e" instead of "X101" (1.23x10-7 = 1.23e-7) and round to three sig figs. QUESTION 5 10 points Save Answer Aspirin is a weak acid with a Ka = 0.0003154. What is the pH of a solution created from 0.28 M aspirin? Round answer to 3 sig figs. QUESTION 6 10 points Save Answer What is the percent ionization of a 0.272 M acetic acid solution with a ka = 1.75x10-57 Round answer to 3 sig figs and do not include the percent sign. QUESTION 7 10 points Save Answer What is the pH of a 0.122 M solution of Ba(OH)2? Round answer to two decimal places.
The kw of pure water at 53.2°C if the pH is 7.1 is equal to 4.21e⁻¹².
The pH of the solution is 3.19.
The percent ionization of a weak acid is 0.0000000000000000000000000000000000000000016.
The pH of the Ba(OH)₂ is 13.04.
Question 4:At 53.2°C, the Kw of water is 4.21e-12, which is calculated using the equation Kw = [H+][OH-] and the fact that at pH 7.1, the concentration of H+ ions is equal to the concentration of OH- ions.
Question 5:Using the Ka value for aspirin, the concentration of H+ ions in a 0.28 M solution of aspirin can be calculated as 3.98e-5. The pH of the solution is then determined using the equation pH = -log[H+], resulting in a pH of 3.19.
Question 6:The percent ionization of a weak acid is given by the equation % ionization = [H+]/[HA] × 100. Using the Ka value and the initial concentration of acetic acid, the concentration of H+ ions can be calculated as 5.18e-29.
Dividing this by the initial concentration of acetic acid and multiplying by 100 gives a percent ionization of 0.0000000000000000000000000016.
Question 7:Ba(OH)2 is a strong base that dissociates completely in water, resulting in the formation of 2 OH- ions. Using the concentration of OH- ions, the pOH of the solution can be calculated as 0.33. Subsequently, the pH of the solution is found using the equation pH + pOH = 14, resulting in a pH of 13.04.
For more questions like pH click the link below:
https://brainly.com/question/15289741
#SPJ11
The kw of pure water at 53.2°C if the pH is 7.1 is equal to 4.21e⁻¹².
The pH of the solution is 3.19.
The percent ionization of a weak acid is 0.0000000000000000000000000000000000000000016.
The pH of the Ba(OH)₂ is 13.04.
Question 4:At 53.2°C, the Kw of water is 4.21e-12, which is calculated using the equation Kw = [H+][OH-] and the fact that at pH 7.1, the concentration of H+ ions is equal to the concentration of OH- ions.
Question 5:Using the Ka value for aspirin, the concentration of H+ ions in a 0.28 M solution of aspirin can be calculated as 3.98e-5. The pH of the solution is then determined using the equation pH = -log[H+], resulting in a pH of 3.19.
Question 6:The percent ionization of a weak acid is given by the equation % ionization = [H+]/[HA] × 100. Using the Ka value and the initial concentration of acetic acid, the concentration of H+ ions can be calculated as 5.18e-29.
Dividing this by the initial concentration of acetic acid and multiplying by 100 gives a percent ionization of 0.0000000000000000000000000016.
Question 7:Ba(OH)2 is a strong base that dissociates completely in water, resulting in the formation of 2 OH- ions. Using the concentration of OH- ions, the pOH of the solution can be calculated as 0.33. Subsequently, the pH of the solution is found using the equation pH + pOH = 14, resulting in a pH of 13.04.
For more questions like pH click the link below:
https://brainly.com/question/15289741
#SPJ11
number of oxygen atoms in 5.20 mol of al2(so4)3.
There are [tex]3.757 * 10^{25}[/tex] oxygen atoms in 5.20 moles of at are calculated using Avogadro's number.
To find the number of oxygen atoms in 5.20 mol of [tex]Al_2(SO_4)_3[/tex], follow these steps:
1. Identify the number of oxygen atoms in one molecule of [tex]Al_2(SO_4)_3[/tex].
The formula shows that there are 3 [tex]SO_4[/tex] units, each containing 4 oxygen atoms: 3 x 4 = 12 oxygen atoms per molecule.
2. Calculate the total number of molecules in 5.20 mol of [tex]Al_2(SO_4)_3[/tex].
Use Avogadro's number ([tex]6.022 * 10^{23}[/tex] molecules/mol):
5.20 mol * ([tex]6.022 * 10^{23}[/tex] molecules/mol) = [tex]3.131 * 10^{24}[/tex] molecules.
3. Find the total number of oxygen atoms by multiplying the number of molecules ([tex]3.131 * 10^{24}[/tex]) by the number of oxygen atoms per molecule (12):
([tex]3.131 * 10^{24}[/tex] molecules) * (12 oxygen atoms/molecule) = [tex]3.757 * 10^{25}[/tex] oxygen atoms.
To learn more about atoms click here https://brainly.com/question/30898688
#SPJ11
calculate the volume of water added to 0.510 l of 0.0440 m sodium hydroxide to obtain a 0.0260 m solution (assume the volumes are additive at these low concentrations).
To calculate the volume of water added to the 0.510 L of 0.0440 M sodium hydroxide to obtain a 0.0260 M solution, follow these steps:
1. Determine the initial moles of sodium hydroxide in the solution:
Moles = Molarity x Volume
Moles = 0.0440 mol/L x 0.510 L = 0.02244 mol
2. Determine the final volume needed to obtain a 0.0260 M solution:
Volume = Moles / Molarity
Volume = 0.02244 mol / 0.0260 mol/L = 0.863 L
3. Since volumes are additive at these low concentrations, calculate the volume of water added:
Volume of water added = Final volume - Initial volume
Volume of water added = 0.863 L - 0.510 L = 0.353 L
Therefore, you need to add 0.353 L of water to the 0.510 L of 0.0440 M sodium hydroxide to obtain a 0.0260 M solution.
https://brainly.com/question/31485541
#SPJ11
predict the major absorbance bands in the ir spectra for both products, 3,3-dimethyl-2- butanone and 2,3-dimethylbut-3-en-2-ol, and outline the differences in the ir spectra. (6 pts)
The main differences in the IR spectra between 3,3-dimethyl-2-butanone and 2,3-dimethylbut-3-en-2-ol are due to the presence of carbonyl absorption in the former and hydroxyl and alkene absorptions in the latter, which can be used to differentiate them based on their functional groups.
For 3,3-dimethyl-2-butanone, the major absorbance bands in the IR spectra would be:
1. Carbonyl (C=O) stretching: around 1700 cm⁻¹
2. C-H stretching for methyl and methylene groups: 2850-3000 cm⁻¹
3. C-H bending for methyl groups: around 1375 cm⁻¹
For 2,3-dimethylbut-3-en-2-ol, the major absorbance bands in the IR spectra would be:
1. Hydroxyl (O-H) stretching: around 3200-3600 cm⁻¹ (broad)
2. C=C stretching for alkene: around 1650 cm⁻¹
3. C-H stretching for methyl, methylene, and alkene groups: 2850-3100 cm⁻¹
4. C-H bending for methyl groups: around 1375 cm⁻¹
The differences in the IR spectra between these two compounds would mainly be the presence of the carbonyl absorption in 3,3-dimethyl-2-butanone and the hydroxyl and alkene absorptions in 2,3-dimethylbut-3-en-2-ol. These differences help in distinguishing the two compounds based on their functional groups.
To know more about IR spectra click here:
https://brainly.com/question/30465075
#SPJ11
how many photons per second strike a sheet of paper of size
The number of photons per second that strike a sheet of paper of a certain size will depend on the source of the photons and the distance between the source and the paper.
For example, if we consider sunlight as the source of photons and assume that the paper is placed at a distance of 1 meter from the source, then the number of photons per second that strike the paper can be estimated to be around 10^18 (1 followed by 18 zeros) photons per second. However, if we consider a laser beam as the source of photons and assume that the paper is placed at a much closer distance, say 1 centimetre, then the number of photons per second that strike the paper will be much higher. In general, the number of photons per second that strike a sheet of paper will depend on various factors such as the energy of the photons, the intensity of the light source, and the distance between the source and the paper.
Learn more about Photons here: brainly.com/question/28134171
#SPJ11
a mixture of he , n2 , and ar has a pressure of 14.8 atm at 28.0 °c. if the partial pressure of he is 2645 torr and that of ar is 2953 mm hg, what is the partial pressure of n2 ?
At 28°C. the partial pressure of N₂ in the mixture of He, N₂, and Ar is 5,650 torr.
To determine the partial pressure of N₂ in the mixture, we first convert all the given values into one consistent unit, then use Dalton's Law of partial pressures.
1. Convert the total pressure to a consistent unit. Since the partial pressures of He and Ar are given in torr and mmHg, let's convert the total pressure from atm to torr:
Total pressure in torr = 14.8 atm * (760 torr / 1 atm) = 11,248 torr
2. Since 1 torr = 1 mmHg, we can use either unit for our calculations. Let's use torr.
3. Use Dalton's Law of partial pressures to find the partial pressure of N₂:
Total pressure = P(He) + P(Ar) + P(N₂)
11,248 torr = 2,645 torr + 2,953 torr + P(N₂)
4. Solve for P(N₂):
P(N₂) = 11,248 torr - 2,645 torr - 2,953 torr
P(N₂) = 5,650 torr
The partial pressure of N₂ in the mixture is 5,650 torr.
Learn more about Dalton's Law of partial pressures here: https://brainly.com/question/19975849
#SPJ11
What is going on in the hexane layer at the end of a Group I Anion experiment?
On a qualitative Analysis for Anions experiment, to a sample, I had to add 3 M HNO3 until it was just acidic. Then, I had to add 3 drops of NaOCl solution then 1mL hexane. After shaking it well, if the solution was yellow, the anion was Br-. If the solution was brown or purple, it was a I- Anion. What is going on with the hexane layer? What does it have to do with the periodic table?
The hexane layer in a Group I Anion experiment is used to separate the anion from the aqueous solution. The hexane is immiscible with the aqueous solution and will float on top, forming a separate layer.
The hexane layer is then used to test for the presence of an anion by adding a few drops of NaOCl solution to the aqueous solution and then shaking it. If a yellow color appears in the hexane layer, then the anion present is bromide. If the color is brown or purple, then the anion present is iodide.
This is due to the fact that the Group I anions are all halogens and have different colors when reacted with NaOCl. Bromide will produce a yellow color, while iodide will produce either a brown or a purple color. The presence of these Group I anions can be determined by the periodic table, as all the Group I elements are found in the same column.
Know more about hexane layer here
https://brainly.com/question/15967693#
#SPJ11
The standard reduction potential E° for the reduction of permanganate in acidic solution is +1.51 V. What is the reduction potential for this half-reaction at pH = 5.00? E° = +1.51 V MnO4 (aq) + 8 H+ (aq) + 5 € → Mn²+ (aq) + 4H₂O(1) (B) +1.42 V (D) -0.85 V (A) +1.50 V (C) +1.04 V
The reduction potential for this half-reaction at pH = 5.00 can be calculated using the Nernst equation:
E = E° - (0.0592/n) x log([Mn²+][H₂O]⁴/[MnO4][H+]⁸)
where E° is the standard reduction potential, n is the number of electrons transferred in the half-reaction (5 in this case), [Mn²+] and [H₂O] are the concentrations of the products, and [MnO4] and [H+] are the concentrations of the reactants.
At pH = 5.00, the concentration of H+ is 10⁻⁵ M. Assuming the concentration of Mn²+ and H₂O are both 1 M, we can calculate:
E = 1.51 V - (0.0592/5) x log([1][1⁴]/[1][10⁻⁵]⁸) E = 1.51 V - (0.0592/5) x log(10¹⁶) E = 1.51 V - 2.01 V E = -0.50 V Therefore, the reduction potential for this half-reaction at pH = 5.00 is -0.50 V, which is option (D).
Learn more about standard reduction potential at
https://brainly.com/question/30904774
#SPJ11
hooow do you rank halogens in order from least active too most active
The halogens ranked from least active to most active are: At, I, Br, Cl, and F.
To rank halogens in order from least active to most active, follow these steps:
1. Recall that halogens are elements in Group 17 (VIIA) of the periodic table, which includes fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At).
2. Understand that the reactivity of halogens decreases as you move down the group. This is due to the increasing atomic size and decreasing electronegativity, making it more difficult for the atom to attract and gain electrons.
3. Arrange the halogens from least active to most active, based on their position in the periodic table, starting from the bottom and moving upward:
Least active: Astatine (At) → Iodine (I) → Bromine (Br) → Chlorine (Cl) → Most active: Fluorine (F)
Know more about halogens - brainly.com/question/1450671
#SPJ11
The isomer [1-methylcyclohexane or 3-methylcyclohexene] is predicted to be formed in greater amounts. The reason is that the more stable, lower energy alkene isomer is the one that [has the highest molar mass, has the highest symmetry, has the higher degree of substitution, or has the lower degree of substitution].
The isomer 1-methylcyclohexene is predicted to be formed in greater amounts. The reason is that the more stable, lower energy alkene isomer is the one that has the higher degree of substitution.
The isomer predicted to be formed in greater amounts is 1-methylcyclohexane. The reason for this is that it has a higher degree of substitution compared to 3-methylcyclohexene, which makes it more stable and lower in energy. This is because 1-methylcyclohexane has a substituent (methyl group) attached to the primary carbon, while 3-methylcyclohexene has a substituent attached to a secondary carbon. Therefore, the higher degree of substitution in 1-methylcyclohexane makes it the more stable isomer.
Learn more about isomer here: brainly.com/question/12796779
#SPJ11
2) why is naoh not a good choice as a base in this reaction?
NaOH is not a good choice as a base in this reaction because it is a strong base and can lead to undesirable side reactions.
Strong bases like NaOH can deprotonate more acidic protons present in the reactants or solvents, causing unwanted by-products and decreased yields. Additionally, strong bases like NaOH can be difficult to control, potentially causing the reaction to proceed too quickly or uncontrollably, which could result in incomplete conversion of the reactants or damage to the desired product.
In contrast, using a weaker base would allow for better control of the reaction, minimizing side reactions and ensuring higher yields of the desired product. Therefore, it is crucial to select a suitable base for a particular reaction, taking into account the strength and potential side effects of the base, and NaOH may not be the optimal choice in this specific case. NaOH is not a good choice as a base in this reaction because it is a strong base and can lead to undesirable side reactions.
Learn more about weaker base at:
https://brainly.com/question/428501
#SPJ11
calculate the ph during the titration of 30.00 ml of 0.1000 m methylamine, (ch3)nh2(aq), with 0.1000 m hcl(aq) after 22 ml of the acid have been added. kb of methylamine = 3.6 x 10-4.
The pH during the titration of 30.00 mL of 0.1000 M methylamine having 0.1000 M HCl after 22 mL of the acid have been added is 3.54.
To determine the pH during the titration of a weak base with a strong acid, we need to find the moles of base initially present and the moles of acid added. Then, we use the balanced chemical equation to determine the moles of acid and base that react, and we use the equilibrium expression for the weak base to determine the concentration of the hydroxide ions present in solution.
Determine the moles of methylamine initially present;
moles of methylamine = (30.00 mL)(0.1000 M) = 0.00300 mol
Determine the moles of HCl added;
moles of HCl = (22.00 mL)(0.1000 M) = 0.00220 mol
Determine the limiting reagent and the moles of base that react;
HCl is the limiting reagent because it is added in a smaller amount. The moles of base that react are equal to the moles of HCl added.
Determine the concentration of methylammonium ion at equilibrium;
(CH₃)NH₃⁺ + H₂O ⇌ (CH₃)NH₂ + H₃O⁺
Kb = [CH₃NH₂][H₃O⁺] / [CH₃NH₃⁺]
At equilibrium, [CH₃NH₂] = 0.00300 - 0.00220 = 0.00080 M
[CH₃NH₃⁺] = [HCl] = 0.00220 M
Kb = (0.00080)(x) / 0.00220
x = [H₃O⁺] = 2.91 x 10⁻⁴ M
Determine the pH;
pH = -log[H₃O⁺]
= -log(2.91 x 10⁻⁴)
= 3.54
To know more about titration here
https://brainly.com/question/2728613
#SPJ4
a) What is the angular speed (in rad/s) of the car? rad/s (b) What are the magnitude (in m/s2) and direction of the car's acceleration? m/s2 magnitude direction Select
a. The angular speed (in rad/s) of the car is: ω = v / r.
b. The magnitude: a = [tex]v^2[/tex] / r (in m/s2) and direction of the car's acceleration is towards the: center of the circular path.
To answer your question, we will know how to calculate the angular speed and the magnitude and direction of the car's acceleration using the given terms.
a) To find the angular speed (ω) of the car in rad/s, you can use the formula:
ω = v / r
where v is the linear speed of the car (in m/s) and
r is the radius of the circular path (in meters).
b) To find the magnitude of the car's acceleration (a), you can use the formula:
a = [tex]v^2[/tex] / r
The direction of the car's acceleration is towards the center of the circular path, also known as centripetal acceleration.
To know more about "Centripetal acceleration" refer here:
https://brainly.com/question/18695728#
#SPJ11
Calculate the pH of a 2.00 M solution of nitrous acid (NHO2). The Ka for nitrous acid is 4.5 x 10-4 A. 1.54 B. 2.23 C. 2.97 D. 4.14.
pH of the solution is 1.54. The correct alternative is A.
The Ka expression for nitrous acid is:
Ka = [H⁺][NO₂⁻] / [HNO₂]
Let x be the concentration of H⁺ and NO₂⁻ ions that are formed in the dissociation of nitrous acid, and assume that the initial concentration of nitrous acid is 2.00 M. Then, the equilibrium concentrations will be:
[HNO₂] = 2.00 - x
[H⁺] = x
[NO₂⁻] = x
Substituting these values into the Ka expression and solving for x:
Ka = [H⁺][NO₂⁻] / [HNO]
4.5 x 10⁻⁴ = x² / (2.00 - x)
This equation can be simplified using the approximation that x << 2.00:
4.5 x 10⁻⁴ = x² / 2.00
x² = 9 x 10⁻⁴
x = 3 x 10⁻₂
Therefore, [H+] = 3 x 10⁻² M, and the pH of the solution is:
pH = -log[H⁺]
pH = -log(3 x 10⁻²)
pH ≈ 1.52
Therefore, the correct answer is A. 1.54.
To know more about pH is:
https://brainly.com/question/491373#
#SPJ11
when can i use the henderson hasselbalch equation
An expression in chemistry that can be used to prepare buffer solutions is the Henderson-Hasselbalch equation.
The Henderson-Hasselbalch equation can be used to calculate the pH of a solution that contains a weak acid and its conjugate base, or a weak base and its conjugate acid. It is used when you have a buffer solution, which is a solution that can resist changes in pH when small amounts of acid or base are added. The Henderson-Hasselbalch equation allows you to calculate the pH of a buffer solution based on the concentration of the weak acid or base, the concentration of its conjugate base or acid, and the dissociation constant of the weak acid or base.
The Henderson-Hasselbalch equation is a chemical expression that can be used to determine an acid-base ratio in order to compute the pH of a buffer or to determine the acid and base concentrations required for a certain pH.
Learn more about Henderson-Hasselbalch equation here
https://brainly.com/question/13423434
#SPJ11
Which of the following statements is true? A) A buffer forms when any acid or base are mixed together B) A buffer forms when a strong acid is mixed with a weak acid. C) A buffer forms when a conjugate weak acid/weak base pair are mixed together. D) A buffer forms when a weak acid is mixed with a weak base.
The correct statement is C) A buffer forms when a conjugate weak acid/weak base pair are mixed together.
A buffer is a solution that resists changes in pH when small amounts of acid or base are added to it. It is made up of a weak acid and its conjugate base, or a weak base and its conjugate acid. When a strong acid or strong base is added to a solution, it can completely ionize and change the pH significantly, which is why they cannot form a buffer. However, when a weak acid is mixed with a weak base, they can form a conjugate acid-base pair and act as a buffer solution.
Learn more about conjugate acid here:
https://brainly.com/question/31229565
#SPJ11
Given the following plot for the decomposition of N2O5, calculate the frequency factor (A):Y axis: ln kX axis: 1/t (K)The graph is a linear line.y= -12232x+30.863 R^2=1.000
The frequency factor (A) for the decomposition of N2O5 is 1.3 x 10^16 s^-1.
To calculate the frequency factor (A) for the decomposition of N2O5, we need to use the Arrhenius equation:
k = A * exp(-Ea/RT)
where k is the rate constant, A is the frequency factor, Ea is the activation energy, R is the gas constant (8.314 J/mol*K), and T is the temperature in Kelvin.
From the given plot, we have ln k on the Y axis and 1/t (K) on the X axis. We know that the slope of the linear line in this plot is equal to -Ea/R, so we can calculate Ea first:
slope = -Ea/R
-12232 = -Ea/8.314
Ea = 101609 J/mol
Now we can rearrange the Arrhenius equation to solve for the frequency factor (A):
ln k = ln A - Ea/RT
We can use any point on the linear line to solve for ln k and 1/t. Let's use the point (0.003333 K, 1.864) from the graph:
ln k = -12232 * 0.003333 + 30.863
ln k = -88.463
1/t = 0.003333 K^-1
Now we can substitute these values into the rearranged Arrhenius equation and solve for A:
-88.463 = ln A - (101609 J/mol) / (8.314 J/mol*K * 0.003333 K^-1)
-88.463 = ln A - 39137
ln A = 39048
A = exp(39048)
A = 1.3 x 10^16 s^-1
Thus, the frequency factor (A) for the decomposition of N2O5 is 1.3 x 10^16 s^-1.
Know more about Arrhenius Equation here: https://brainly.com/question/30514582
#SPJ11
find the solubility of cui in 0.32 m kcn solution. the ksp of cui is 1.1×10−12 and the kf for the cu(cn)2− complex ion is 1×1024 .
The solubility of CuI in a 0.32 M KCN solution is 1.03 M.
To find the solubility, first determine the reaction quotient (Q) for CuI dissolving in KCN:
CuI(s) + 2 KCN(aq) -> Cu(CN)2⁻(aq) + 2 K⁺(aq) + I⁻(aq)
Ksp(CuI) = [Cu⁺][I⁻] = 1.1 x 10⁻¹²
Kf(Cu(CN)2⁻) = [Cu(CN)2⁻]/([Cu⁺][CN⁻]^2) = 1 x 10²⁴
Now, set up the equilibrium equation with the given concentrations:
Q = [Cu(CN)2⁻]/([Cu⁺][0.32]²)
Since Q > Ksp, the reaction shifts right, and CuI dissolves. Substitute the Kf expression into the Q equation and solve for [Cu⁺]:
[Cu⁺] = (1 x 10²⁴)/[CN⁻]² = (1 x 10²⁴)/(0.32)²= 1.03 M
Thus, the solubility of CuI in a 0.32 M KCN solution is 1.03 M.
To know more about reaction quotient click on below link:
https://brainly.com/question/30200804#
#SPJ11
I’m not sure what’s going wrong on problem 25
The nature of the hemoglobin in the lungs lungs is Hb(O2)4.
The volume of water added is 1851.7 mL
What is the Le Chateliers principle?Le Chatelier's principle is a principle in chemistry that describes how a system at equilibrium responds to changes in its environment.
Using the dilution principle;
C1V1 = C2V2
C1 = Antilog(-2.025)
= 9.4 * 10^-3 M
C2 = Antilog (-4.050)
= 8.9 * 10^-5 M
Then;
V2 = C1V1/C2
V2 = 9.4 * 10^-3 M * 17.7/8.9 * 10^-5 M
V2 = 1869.4 mL
Volume of water added = 1869.4 mL - 17.7 mL
= 1851.7 mL
Learn more about Le Chateliers principle:https://brainly.com/question/29009512
#SPJ1
31. Rank the following compounds in order of increasing rates of their SN2 reactions.
Rank the following compounds in order of increasin
In general, the following factors increase the rate of SN2 reactions:
1. Decreased steric hindrance around the electrophilic carbon
2. Increased nucleophilicity of the attacking nucleophile
3. Increased leaving group ability of the leaving group
With these factors in mind, the compounds can be ranked in order of increasing rates of SN2 reactions as follows:
1. tert-butyl chloride (most hindered)
2. isopropyl chloride
3. ethyl chloride
4. methyl chloride (least hindered)
So, the correct order from slowest to fastest SN2 reaction is: tert-butyl chloride, isopropyl chloride, ethyl chloride, and methyl chloride.
To know more about SN2 reactions:
https://brainly.com/question/27060397
#SPJ11
Pb203
+
2K3N
-)
2PBN
* 3K20
If 12.7 g of K20 were made with a percentage yield of 78.4 %, what mass of Pb20s was used?
Explanation:
The Molar mass of K2O is 94,2 g/mol
The moles of K2O can be calculated
[tex]n_{K_2 O} = \frac{12,7 g}{94,2 g/mol} = 0,135 mol[/tex]
The stoichiometric coefficients must be considered: in order to produce 3 moles of K2O, 1 mole of Pb2O3 are needed. In other words, if 1 mole of K2O is produced, 1/3 of a mole of Pb2O3 is needed. So
[tex]n_{Pb2O3} = \frac{0,135 mol}{3} = 0,0450 mol[/tex]
The molar mass of Pb2O3 is 462,4 g/mol
The theoretical mass of Pb2O3 used to produce K2O is
[tex]m_{Pb2O3} = 0,0450 mol \times 462,4 g/mol = 20,8 g[/tex]
Since the yield is not 100%, a larger mass was needed to perform the reaction.
[tex]\frac{20,8}{78,4} = \frac{x}{100} \\ \\ x = \frac{20,8 \times 100}{78,4} = 26,5 g[/tex]
a chem 1314 student narrowed the unknown choice down to nacl or naoh. what reagent from this lab should she add to make her final identification?
Reagent from this lab should she add to make her final identification is NaCl or NaOH.
To make the final identification between NaCl and NaOH, the chem 1314 student should add a reagent that can differentiate between the two compounds. One possible reagent that could be used is silver nitrate (AgNO3). If the unknown compound is NaCl, then when AgNO3 is added, a white precipitate of silver chloride (AgCl) will form. However, if the unknown compound is NaOH, then no precipitate will form when AgNO3 is added. Therefore, the addition of silver nitrate can help the student identify whether the unknown compound is NaCl or NaOH.
Precipitates are solids that are created during or as byproducts of chemical reactions in solutions. Precipitates come in a wide variety of sizes and shapes, from tiny granules to huge pieces. The chemical compound NaCl is also referred to as sodium chloride. It is frequently called table salt.
Learn more about Precipitates here
https://brainly.com/question/31046678
#SPJ11
a) What is the pH of an aqueous solution that is 0.25 M HNO2 and 0.32 M NaNO2? b) Write the predominant chemical reaction (including physical states) that occurs when 0.05 mol of KOH is added to 1.00 L of the solution in part a. c) Calculate the pH of the solution described in part c.
a) The pH of the solution is 3.57.
b) The chemical reaction is HNO₂ (aq) + KOH (aq) → KNO₂ (aq) + H₂O (l)
c) The pH of the solution after adding 0.05 mol of KOH is 3.54.
a) To determine the pH of the solution, we need to first find the pKa value of HNO₂, which is 3.3. Then, we can use the Henderson-Hasselbalch equation:
pH = pKa + log([NaNO₂]/[HNO₂])
pH = 3.3 + log(0.32/0.25)
pH = 3.57
b) When 0.05 mol of KOH is added to the solution, the following reaction occurs:
HNO₂ (aq) + KOH (aq) → KNO₂ (aq) + H₂O (l)
In this reaction, KOH acts as a base and reacts with HNO₂, which acts as an acid. The reaction results in the formation of KNO₂, which is a salt, and water.
c) To calculate the pH of the solution after adding 0.05 mol of KOH, we need to determine the concentration of HNO₂ and NaNO₂ after the reaction. Since KOH is a strong base, it will react completely with HNO₂, which means that all of the HNO₂ will be converted to NO₂⁻.
The moles of HNO₂ initially present in the solution is:
0.25 M x 1.00 L = 0.25 mol
Since 0.05 mol of KOH is added to the solution, the moles of HNO₂ remaining after the reaction is:
0.25 mol - 0.05 mol = 0.20 mol
The moles of NaNO₂ initially present in the solution is:
0.32 M x 1.00 L = 0.32 mol
Since HNO₂ reacts completely with KOH, the moles of NaNO₂ remaining after the reaction is still 0.32 mol.
Therefore, the new concentrations of HNO₂ and NaNO₂ are:
[HNO₂] = 0.20 mol / 1.00 L = 0.20 M
[NaNO₂] = 0.32 mol / 1.00 L = 0.32 M
Using the Henderson-Hasselbalch equation, we can calculate the pH of the solution after the reaction:
pH = pKa + log([NaNO₂]/[HNO₂])
pH = 3.3 + log(0.32/0.20)
pH = 3.54
To know more about Henderson-Hasselbalch equation click on below link:
https://brainly.com/question/13423434#
#SPJ11
Impressed current uses external power to force current to flow from the anode to the structure through ______
A) metallic path
B) air
C) the electrolyte
D) backfill
E) ions
Impressed current cathodic protection (ICCP) is a corrosion prevention technique that utilizes an external power source to force a direct electrical current onto a metallic path, preventing corrosion.
The system consists of an anode, which is connected to the positive terminal of a DC power supply, and a cathode, the structure to be protected, connected to the negative terminal. The anode, usually made of an inert material such as platinum, is placed in an electrolyte, which is usually a conductive liquid. As a result, current flows from the anode, through the electrolyte, and onto the structure through a metallic path.
The impressed current system generates a current that is greater than the natural corrosion current, thereby making it more effective than other cathodic protection methods. The power source is typically designed to produce a current density that is sufficient to overcome the natural corrosion rate of the structure. ICCP systems are commonly used in environments with high corrosion rates, such as seawater, and are effective at protecting large structures such as bridges, offshore platforms, and pipelines. The system requires periodic maintenance to ensure that it continues to operate efficiently.
learn more about the corrosion Refer: https://brainly.com/question/31313074
#SPJ11
The concentration of OH- in a saturated solution if Mg(OH)2 is 3.63 times 10-4 M. The Ksp of Mg(OH) is? A. 6.6 X 10^8 B. 4.8 X 10^11 C. 1.3 X 10^7 D. 3.6 X 10^-4 A. 2.4 X 10^11
The Ksp value of Mg(OH)2 is A. 2.4 X 10^11.
What is the Ksp value of Mg(OH)2?To find the Ksp of Mg(OH)2, we need to use the equation:
Ksp = [Mg2+][OH-]^2
Since Mg(OH)2 is a strong electrolyte, it will dissociate completely in water, meaning that the concentration of Mg2+ will be equal to the concentration of Mg(OH)2, which is 3.63 times 10-4 M.
We can then use the concentration of Mg2+ to find the concentration of OH- using the equation:
Mg(OH)2 ⇌ Mg2+ + 2OH-
Since Mg(OH)2 is a 1:2 electrolyte, the concentration of OH- will be twice the concentration of Mg2+, or 2(3.63 times 10-4 M) = 7.26 times 10-4 M.
Plugging these values into the Ksp equation, we get:
Ksp = (3.63 times 10-4 M)(7.26 times 10-4 M)^2 = 2.4 times 10^11
Therefore, the answer is A. 2.4 X 10^11.
Learn more about Ksp value
brainly.com/question/13032436
#SPJ11
Liquid potassium chloride, KCl(l), is decomposed in an electrolytic cell to form potassium and chlorine. Liquid KCl consists of ions. K+ and CI (a) Write balanced equations for the half-cell reactions at the anode and at the cathode, and for the overall cell reaction. (b) If a current of 2.00 A is passed through the cell for a period of 5.00 hours, calculate the mass of metal deposited and of gas liberated.
A) The balanced equations for the half-cell reactions at cathode and anode and the overall cell reaction are:
K+ + e- -> K (At cathode)
2Cl- -> Cl2 + 2e- (At anode)
2KCl(l) -> 2K(l) + Cl2(g) (Overall cell reations)
B) The mass of K deposited is 14.57 g, and the mass of Cl2 gas produced is 26.45 g.
A) At the cathode: K+ + e- -> K (Reduction half-reaction)
At the anode: 2Cl- -> Cl2 + 2e- (Oxidation half-reaction)
Overall cell reaction: 2KCl(l) -> 2K(l) + Cl2(g)
B) First, we need to calculate the number of moles of electrons that flowed through the cell:
2.00 A * 5.00 h = 36000 C
n = Q/F = 36000 C / 96485 C/mol = 0.373 mol
At the cathode, 0.373 mol of electrons were consumed to form K metal:
m(K) = n(MW) = 0.373 mol * 39.10 g/mol = 14.57 g
At the anode, 0.373 mol of electrons were produced by the oxidation of Cl- ions, and reacted with H2O to form Cl2 gas:
2Cl- -> Cl2 + 2e-
The volume of Cl2 gas produced can be calculated using the ideal gas law:
PV = nRT
V = nRT/P = (0.373 mol * 8.314 J/mol.K * (273.15+25) K) / (101.325 kPa * 1000 Pa/kPa) = 0.0267 m3
The mass of Cl2 gas produced can be calculated using its molar mass:
m(Cl2) = n(MW) = 0.373 mol * 70.90 g/mol = 26.45 g
Therefore, the mass of K deposited is 14.57 g, and the mass of Cl2 gas produced is 26.45 g.
for more such question on half-cell reactions
https://brainly.com/question/15689958
#SPJ11
fill in the blank coefficient in the balanced version of the following chemical equation. ch4 h2o⟶co h2
The coefficients in the balanced chemical equation are:
CH₄ (1) + H₂O (1) ⟶ CO (1) + H₂ (3)
Balance the chemical equation CH₄ + H₂O ⟶ CO + H₂. Please follow the steps below:
1. Identify the number of atoms for each element on both sides of the equation:
Unbalanced equation: CH₄ + H₂O ⟶ CO + H₂
Left side: C = 1, H = 4 + 2 = 6, O = 1
Right side: C = 1, H = 2, O = 1
2. Balance the elements by adjusting the coefficients:
- Carbon is already balanced.
- To balance the hydrogen, we can multiply H₂ on the right side by 3: CH₄ + H₂O ⟶ CO + 3H₂
Balanced equation: CH₄ + H₂O ⟶ CO + 3H₂
To know more about "Atom" refer here:
https://brainly.com/question/14644957#
#SPJ11
convert the science notation to a decimal number 4 × 10-5 cm
Explanation:
4. x 10^-5 the -5 exponent means move the decimal point FIVE spaces to the LEFT
= .00004
describe the difference between a continuous spectrum from a black body radiator and a line spectrum
The main difference between a continuous and linear spectrum is the presence or absence of gaps or missing colors in the emitted light.
A continuous spectrum, such as that emitted by a blackbody radiator, shows a wide range of frequencies or wavelengths of light with no gaps. The intensity of the emitted light varies continuously throughout the spectrum. Blackbody radiators, like the Sun, produce light by thermal radiation and exhibit a continuous spectrum.
A line spectrum, on the other hand, consists of distinct and separate lines or "spectra" at specific frequencies or wavelengths. This type of spectrum is produced when atoms or molecules in a gas phase emit or absorb light at particular wavelengths, which are unique to the element or compound involved. Line spectra are characteristic of elements and can be used for identification purposes.
Learn more about the electromagnetic spectrum at https://brainly.com/question/25131143
#SPJ11