State two methods to increase the rate of the chemical reaction and explain
for each, in terms of particle behavior, how each method would increase
reaction rate.
METHOD 1:
Explanation:
METHOD 2:
Explanation:

Answers

Answer 1

Answer:

METHOD 1: (surface area of a solid reactant)  METHOD 2: (concentration or pressure of a reactant)

Explanation:

METHOD 1: (surface area of a solid reactant) Increasing the surface area of a solid reactant exposes more of its particles to attack. This results in an increased chance of collisions between reactant particles, so there are more collisions in any given time and the rate of reaction increases.

METHOD 2: (concentration or pressure of a reactant) Increasing the concentration means that we have more particles in the same volume of solution. This increases the chance of collisions between reactant particles, resulting in more collisions in any given time and a faster reaction. As we increase the pressure of reacting gases, we increase the rate of reaction.


Related Questions

Compounds are held together by chemical bonds, can be represented by a chemical
formula,
__(can or cannot) be broken down by a physical process, and are made
up of ___________ or more different elements.

cannot, two
can, two
cannot, one
can, one

Answers

Answer:

Cannot, two

Explanation:

The component elements of a compound can only be separated via a chemical reaction that breaks the atomic bonds that bind its molecules. Also, compounds are formed by 2 or more different elements.

QUESTION 3 All of the following are homogeneous mixtures except A. hydrogen gas and chlorine gas. B. sodium chloride and potassium chloride. OC. mercury-zinc solution. OD. hydrochloric acid solution. O E. sodium chloride and potassium chlSride solution.

Answers

Answer:

hydrogen gas and chlorine

Explanation:

HCl is a chemical compound and aqueous solution form of HCl is a homogeneous solution

All the following are homogeneous mixtures except hydrogen gas and chlorine gas. Therefore, option A is correct.

What do you mean by homogeneous mixture ?

A mixture is said to be homogeneous if its composition is constant throughout. Because the dissolved salt is evenly distributed throughout the whole salt water sample, the salt water described above is homogeneous.

It is single in composition throughout. There is only one phase of matter observed in a homogeneous mixture.

In an aqueous solution of hydrogen chloride gas, water serves as the solvent and the solute, respectively. Hence, hydrogen chloride is a homogeneous mixture rather than a compound.

When hydrogen chloride is dissociated and solvated in water to create hydrochloric acid, it counts as a homogeneous mixture.

Thus, option A is correct.

To learn more about the homogeneous mixture, follow the link;

https://brainly.com/question/24898889

#SPJ2

The compound cobalt(II) nitrate, Co(NO3)2 is soluble in water. Write the net ionic equation for the dissociation reaction that occurs when solid cobalt(II) nitrate dissolves in water: specify states such as (aq) or (s).

Answers

The compound cobalt(II) nitrate, Co(NO3)2 is soluble in water. The net ionic equation for the dissociation reaction is Co(NO3)2 (s) = CO2+(aq) + Na3(aq) + PO4-(l).

In general, during the dissociation process in chemistry, molecules (or ionic compounds like salts, or complexes) separate or divide into different entities like atoms, ions, or radicals. This procedure is typically reversible. For instance, the covalent bond between an electronegative atom and a hydrogen atom is broken when an acid dissolves in water due to heterolytic fission, in a reaction which releases a proton (H+) and a negative ion. Dissociation is the antithesis of connection or recombination. Separation of the anions and cations occurs when salts are dissociated by solvation in a solution, such as water. The solvent can be evaporated in order to recover the salt. A substance that has free ions and can be employed as an electrically conducting medium is referred to as an electrolyte. In a weak electrolyte, the majority of the solute does not dissolve, whereas in a strong electrolyte, a higher proportion of the solute dissociates to generate free ions. A weak electrolyte is a material whose solute primarily occurs in solution as molecules (which are referred to as being "undissociated"), with a very tiny amount existing in solution as ions.

To know more about reaction please refer: https://brainly.com/question/29762834

#SPJ4

Nucleotide

Phosphate

Hydrogen Bond

Deoxyribose

Answers

Nucleotide identifies the part of the DNA segment labeled as X in the given image.

What is Nucleotides?

Nucleotides are organic compounds composed  of phosphate and a nucleoside and are nitrogen containing base.

They function as monomeric units of the deoxyribonucleic acid and ribonucleic acid polymers, which are both crucial macromolecules for all kinds of life on Earth.They consists of nitrogen containing base such as :adenine guanine thymineand cytosine in DNA RNA:

RNA is often single-stranded, unlike DNA. Instead of the deoxyribose present in DNA, the backbone of an RNA molecule is made up of alternating phosphate groups and the sugar ribose.

They similarly Consists of the following in RNA :

adenineguanine uracil,and cytosine

To know more about Nucleotides visit

https://brainly.com/question/16308848

#SPJ1

What is 2 examples of a function?

Answers

y = 2x + 1

y = 3x – 1

these two are the example of functions.

Functions

A function is defined as a relation between a set of inputs having one output each. In simple words, a function is a relationship between inputs where each input is related to exactly one output.

Every function has a domain and codomain or range. A function is generally denoted by f(x) where x is the input. The general representation of a function is y = f(x).

An example of a simple function is f(x) = x2. In this function, the function f(x) takes the value of “x” and then squares it. For instance, if x = 3, then f(3) = 9.

Learn more about function here :-

https://brainly.com/question/23919020

#SPJ4

how many unique h1h1 nmr and c13c13 nmr signals exist for each compound? a. h1h1 nmr signals in a c13c13 nmr signals in a b. h1h1 nmr signals in b c13c13 nmr signals in b c. h1h1 nmr signals in c c13c13 nmr signals in c d.

Answers

There are distinct h1h1 & c13c13 nmr signals for each molecule, which are a.3, b.3, and c2.

How many distinct h1 NMR & c13 NMR signals are there for each benzene compound?

All locations in benzene are identical to one another.As a result, all six hydrogen atoms produce just one signal for proton NMR, and all 6 carbon atoms produce just one signal in 13-C NMR.

Inside a 13C NMR experiment, how so many signals will each of the molecules below produce?

These substances each produce three signals!Similar to the examples before, we can determine that two carbon atoms are equivalent by looking at the symmetry planes of a molecule.

To know more about compound visit:

https://brainly.com/question/13516179

#SPJ4

what is a consquence of electron pair repulsion around an atom

Answers

Answer: Option c

Explanation:

Arrange the oxoacids of bromine according to strength. Strongest acid 0 L00 Weakest acid 100 Answer Bank 100 about us careers privacy policy terms of use contact us help

Answers

The strength of oxoacids increases as the number of oxygen atoms increases. Therefore, the strongest one is HBrO₄ >HBrO₃> HBrO₂> HBrO.

What is oxoacids?

Oxoacids are inorganic acids containing oxygen atoms. Group 15 elements such as phosphorus, groups 16 elements such as sulfur, and halogens forms oxoacids.

The strength of oxoacids depends on the number of oxygen atoms and possible resonating structures. The more the number of possible resonating structures the more will be the strength.

Therefore, the order  strength of the oxoacids of Br is as follows:HBrO₄ >HBrO₃> HBrO₂> HBrO.

To find more on oxoacids, refer here:

https://brainly.com/question/28306026

#SPJ4

Your question is incomplete. But your complete question is as follows:

Arrange the oxoacids of bromine according to strength. HBrO, HBrO2, HBrO3, HBrO4.

HCl + NaOH 2. Write the balanced chemical reaction for reaction 3. Be sure to include the states of matter and correct formulas. If applicable (ie: if you classified it as a precipitation reaction) include the net ionic equation as well. CH₃Cool & Noot 1. Write the balanced chemical reaction for reaction 1. Be sure to include the states of matter and correct formulas. If applicable (ie: if you classified it as a precipitation reaction) include the net ionic equation as well. Write the balanced chemical reaction for reaction 5. Be sure to include the states of matter and correct formulas. If applicable (ie: if you classified it as a precipitation reaction) include the net ionic equation as well. + Naz po + Fecla 3. Write the balanced chemical reaction for reaction 5. Be sure to include the states of matter and correct formulas. If applicable (ie: if you classified it as a precipitation reaction) include the net ionic equation as well. Naz pa + Fecha 4. Write the balanced chemical reaction for reaction 7. Be sure to include the states of matter and correct formulas. If applicable (ie: if you classified it as a precipitation reaction) include the net ionic equation as well. (NH4)2CO₃ + Cucla

Answers

The balanced chemical equation is HCl + NaOH2 ---->  NaCl2 + H2O. This is double displacement reaction.

Chemical formulas and symbols used in chemical equations are used to represent chemical reactions symbolically. The reactant entities are supplied on the left, and the product entities are given on the right, with a plus sign separating the entities in both the reactants and the products, and an arrow pointing in the direction of the products to show the direction of the reaction. Chemical equations can be either mixed, structural, or both. Coefficients are displayed next to the symbols and formulas of the various entities, together with the absolute values of the stoichiometric numbers. A chemical equation is made up of a list of reactants (the chemicals used to start the reaction) on the left, an arrow symbol, and a list of products (the substances created during the reaction) on the right. Each substance is described by its chemical formula, which may be followed by a stoichiometric coefficient, a numerical value. The coefficient describes the number of molecular entities (such as molecules) of that chemical that are engaged in the process. If not stated specifically, the coefficient is + sign separates two or more substances on any side of the equation from one another.

To know more about chemical equation please refer: https://brainly.com/question/28294176

#SPJ4

What is the freezing point of a solution that contains 10.0 g of glucose c6h12o6 in 100 g of h2o?

Answers

The freezing point of a solution containing 10.0 g of glucose C6H12O6 in 100 g of H2O is -0.53°C.

What is freezing point?

Freezing point is the temperature at which a liquid turns into a solid. It is the temperature at which a liquid's vapor pressure is equal to the atmospheric pressure. The freezing point of pure water is 0°C (32°F), while most other liquids have different freezing points. Some liquids, such as ethanol, have a lower freezing point than water, while others, such as propylene glycol, have a higher freezing point.

This is because the freezing point depression of a solution is dependent on the amount of solute present within a given amount of water. Glucose, being a solute, causes the freezing point of the solution to decrease.

To know more about freezing point click-

https://brainly.com/question/24314907

#SPJ4

Draw the Lewis dot structure for each of the following: hexane (C6H14), isopropyl alcohol(C3H7OH), methanol (CH3OH) and saline (H2O). You may want to practice drawing organic molecules with multiple "central" atoms before you attempt the Lewis Dot structures for these molecules.These should be hand drawn

Answers

Lewis dot structures, also known as electron dot structures, are diagrams that depict the chemical bonds that exist between atoms in a molecule. They also show the total number of lone pairs in each of the atoms that make up the molecule.

A Lewis Electron Dot Formula has one dot for each valence electron and the symbol of the element. The stages for articulating the electron dot formula are listed below. Make a skeletal structure with only the element symbols that shows a realistic bonding pattern.

Pick up every two electrons from each atom and simply throw them into a fictitious container known as an electron pot. To determine the number of bonds, use the N - A = S equation.

Learn more about Lewis here;

https://brainly.com/question/15570523

#SPJ

What type of chemical bond is cornstarch?

Answers

Starch is a complex carbohydrate that is a polymer of sugar molecules. The sugars in starch have OH bonds that can interact and stick together through a process known as hydrogen bonding.

A hydrogen bond is an electrostatic force of attraction between a hydrogen atom covalently bound to a more electronegative "donor" atom or group and another electronegative atom bearing a lone pair of electrons—the hydrogen bond acceptor—in chemistry.

Hydrogen bonding is not a covalent bond to a hydrogen atom, but rather a type of dipole-dipole attraction between molecules. The attractive force between a hydrogen atom covalently bonded to a very electronegative atom such as an N, O, or F atom and another very electronegative atom causes it. Because hydrogen bonds have the strongest permanent molecular dipoles of any covalent bond, they have the strongest intermolecular forces for covalent compounds.

To learn more about hydrogen bonding, here

https://brainly.com/question/7132123

#SPJ4

what is the final pressure in the bottle for a monatomic gas, for which cv,m = 3r/2?

Answers

The final pressure in the bottle for a monatomic gas is 1.20*10^3 Pa.

Given that,

lnitial temperature T = 328 K

Pressure P = 1.606 *10^5 Pa

After the gas expands adiabatically,

P' = 1.203 * 10^5 Pa

Temperature = T'

[tex]P^{f} = P' * (P'/P)^{1-gamma/gamma} \\P^{f} = P^{1/gamma}* P^{gamma-1/gamma}\\[/tex]

For monatomic gas (CV, m = 3R/2 , gamma = 5/3),

[tex]P^{f} = (1.203*10^5)^{3/5}*(1.606*10^5)^{(5/3-1)/5/3} \\ = 1117.27 * 116.59\\ = 1.30 * 105 Pa[/tex]

Part B:

For diatomic gas ( CV, m = 5R/2 , gamma = 7/5)

[tex]P^{f} = (1.203*10^5)^{5/7}*(1.606*10^5)^{(7/5-1)/7/5} \\P^{f} = 1.20*10^{3}Pa[/tex]

To know more about the Pressure, here

https://brainly.com/question/1367741

#SPJ4

A reaction reaches dynamic equilibrium at a given temperature when a) the amount of products exceeds the amount of reactants. b) kfwd equals krev. c) opposing reactions cease and the system is static. d) the relative amounts of reactants and products are constant and ratefwd = raterev.

Answers

A reaction reaches dynamic equilibrium at a given temperature when the relative amounts of reactants and products are constant and rate fwd = rate rev. Option D is the correct answer.

What is dynamic equilibrium of a reaction?

This refers to the state of a given system in which the reversible reaction taking place ceases to change the ratio of reactants and products, but there is a movement of substances between the reactants and the products.

Hence, a reaction reaches dynamic equilibrium at a given temperature when reactants change into products and products change into reactants even after equilibrium is achieved. But the rate of forward and backward reactions are the same.

Learn more about dynamic equilibrium on

https://brainly.com/question/2363073

#SPJ1

in a laboratory experiment, a student found that a 195-ml aqueous solution containing 2.494 g of a compound had an osmotic pressure of 12.2 mmhg at 298 k. the compound was also found to be nonvolatile and a nonelectrolyte. what is the molar mass of this compound?

Answers

The compound's mole ratio in a laboratory setup is 3125.12 g/mol, according to the statement.

Water: an electrolyte or not?

Water that is completely free of ions is said to be pure. This could conduct electricity as a result. The inclusion of ions in the mixture allows the solution to carry an electric current when other substances, such as ionic compounds, are dissolved in water.

Briefing:

Osmotic pressure is given by;

π = C * R * T

∵ 760 mmHg = 1 atm

10.3 mmHg = 1 * 12.2/760 atm

= 0.016 atm

π = no. of moles * R * T/volume (L)

π = Weight (g) * R * T / Molar mass * V (L)

0.016 atm = 2.494 * 0.082 L atm K⁻¹ mol⁻¹ * 298 K/ M.W * 195 * 10⁻³

M.W = 3125.12 g/mol

Consequently, the compound's molar mass is 3125.12 g/mol.

To know more about Nonelectrolyte visit:

https://brainly.com/question/29771118

#SPJ1

What is the concentration of a solution that has 15 grams of a solute and 5 liters of water?

Answers

The concentration of a solution that has 15 grams of a solute and 5 liters of water is 3 g/L (grams per liter).

What is concentration?

Concentration is the ability to focus one's attention on a task or activity, blocking out distractions and remaining focused on the task at hand. It is a skill that helps us to stay focused and avoid being easily sidetracked. Concentration is often thought of as being a key factor in academic success, as well as having an important role in the workplace. It can also be beneficial in everyday life, helping us to stay organized and on top of our commitments and responsibilities.

Concentration is a skill that can be developed and improved with practice. Strategies such as setting specific goals, breaking down complex tasks into smaller steps, and taking regular breaks can help to improve concentration. Additionally, reducing distractions such as background noise, social media, and other forms of entertainment can help to create an environment that is more conducive to concentration. Finally, making sure to get enough rest and exercise can also help to improve concentration.
It is calculated by dividing the mass of the solute (15 grams) by the volume of the solution (5 liters). To put it another way, the concentration of the solution is 3 grams of solute for every liter of water. This type of concentration is commonly expressed as either g/L or mg/L (milligrams per liter).
To know more about concentration click

https://brainly.com/question/23437000
#SPJ4

Can you put lemon juice in a metal bowl?

Answers

Acid in lemon juice reacts with metal containers to produce harmful chemicals. As a result, lemon juice is not kept in such containers.

What  is Acid ?

Acidic substances are typically easy to recognise by their sour flavours. A molecule that can donate an H+ ion and keep its energetic favorability even after losing H+ is a basic definition of an acid. Blue litmus paper is known to turn red when exposed to acids.

Bases, on the other hand, have a smooth consistency and a bitter flavour. A base that may dissolve in water is known as alkali. When these substances interact chemically with acids, salts are created. Red litmus has a history of becoming blue on bases.

The definitions of the terms acid and base vary depending on how one chooses to see the properties of acidity and basicity.

Lemon juice has a strong acidic flavor and can react with some metals. Lemon juice can corrode or rust metal when it comes into touch with it. This is so that iron oxide, a new chemical created by the reaction between the metal and the acid in lemon juice, can be formed.

Reddish-brown iron oxide is a less powerful material than pure iron. Iron oxide will keep combining with oxygen in the air over time to coat the metal in a thick film of rust.

Learn more about Acid from given link

https://brainly.com/question/25148363

#SPJ4

What does Apollo offend Cupid do?

Answers

Apollo boasted to Cupid about how much larger his bow was. Apollo was offended, and Cupid hit him with a golden love arrow in retaliation, leading him to fall in love with the first person he saw.

Who was punished by Apollo for having a human lover?

Daphne, in her effort to escape him, was changed into a laurel, his sacred tree; Coronis was shot by Apollo's twin, Artemis, when she proved unfaithful; and Cassandra rejected his advances and was punished by being made to utter true prophecies that no one believed.5 days ago

What enraged Eros against Apollo?

Apollo unexpectedly advised Eros to leave warlike weapons to powerful gods like him and stick to magic instead after defeating Python, a terrible earth-dragon that lived near Delphi.

To know more about Cupid and apollo visit:-

https://brainly.com/question/19952705

#SPJ4

What is the formula for Mononitrogen tetrafluoride ?

Answers

Answer:

NF[tex]_{4}[/tex]

Explanation:

Mononitrogen tetrafluoride is a simple inorganic compound consisting of a single nitrogen atom bonded to four fluorine atoms. The formula for mononitrogen tetrafluoride is therefore simply NF4.

What are the types of reaction?

Answers

Combination reaction is one of the five main categories of chemical reactions. reaction of decomposition. displacing response. Reaction with double displacement. Reaction to precipitation.

Which of the five reactions are they?

Combination, decomposition, single-replacement, double-replacement, and combustion are the five fundamental types of chemical reactions. chemical reaction, often known as the conversion of one or more chemicals (sometimes referred to as reactants) into one or more other compounds (the products).

What exactly are endothermic and exothermic reactions?

Endothermic reactions are chemical processes in which the reactants absorb heat energy from their surroundings to produce products.  The reaction absorbs energy from its surroundings.

To know more about Reaction visit:-

https://brainly.com/question/28984750

#SPJ4

If sodium (na) has 4 neutrons, 3 protons, and 2 electrons, which would be the correct ion symbol? responses.

Answers

If sodium has 4 neutrons, 3 protons, and 2 electrons, the correct symbol for the ion is: Na⁺.

How to determine the symbol of sodium ion?

To write the symbol for sodium ion, we need to examine the number of neutrons, protons, and electrons it has. Generally, a neutral atom has the same number of protons and electrons. It also has the same number of neutrons and protons. This sodium has 3 protons and 2 electrons. Therefore, this ion needs 1 more electron to reach neutrality. Hence, the total charge for the ion is +1 and the correct symbol is Na⁺.

Learn more about the symbol of ion https://brainly.com/question/28562626

#SPJ4

48 moles of NaOH to grams of N2?
2NBr3 + 3NaOH = N2 + 3 NaBr + 3HOBr

Answers

Taking into account the reaction stoichiometry, a mass of 448 grams of N₂ is formed when 48 moles of NaOH reacts.

Reaction stoichiometry

In first place, the balanced reaction is:

2 NBr₃ + 3 NaOH  → N₂ + 3 NaBr + 3 HOBr

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

NBr₃: 2 molesNaOH: 3 molesN₂: 1 moleNaBr: 3 molesHOBr: 3 moles

The molar mass of the compounds is:

NBr₃: 253.7 g/moleNaOH: 40 g/moleN₂: 28 g/moleNaBr: 102.9 g/moleHOBr: 96.9 g/mole

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

NBr₃: 2 moles ×253.7 g/mole= 507.4 gramsNaOH: 3 moles ×40 g/mole= 120 gramsN₂: 1 mole ×28 g/mole= 28 gramsNaBr: 3 moles ×102.9 g/mole= 308.7 gramsHOBr: 3 moles ×96.9 g/mole= 290.7 grams

Mass of N₂ formed

The following rule of three can be applied: if by reaction stoichiometry 3 moles of NaOH form 28 grams of N₂, 48 moles of NaOH form how much mass of N₂?

mass of N₂= (48 moles of NaOH× 28 grams of N₂)÷ 3 moles of NaOH

mass of N₂= 448 grams

Finally, 448 grams of N₂ is formed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

The element with an electron configuration of 1s22s22p63s23p64s23d2 is in group__ and period__. The element with an electron configuration of 1s22s22p63s23p6 is in group__and period __.

Answers

The element with an electron configuration of 1s²2s²2p⁶3s²3p⁶4s²3d² is in group 4 and period 4. The element with an electron configuration of 1s²2s²2p⁶3s²3p⁶ is in group 18 and period 3.

What are groups and periods?

A group is the column in the periodic table of chemical elements while the period is the row in the periodic table of the elements.

The electron configuration an element describes how electrons are distributed in its atomic orbitals. The atomic number of the element is used.

According to this question;

1s²2s²2p⁶3s²3p⁶4s²3d² has atomic number 22 and hence, is titanium. 1s²2s²2p⁶3s²3p⁶ has atomic number 18 and hence, is Argon

Titanium is in group 4 and period 4 of the periodic table while Argon is in group 18 and period 3.

Learn more about groups and periods at: https://brainly.com/question/1995318

#SPJ1

What is the molarity of a solution containing 7.78 gram of urea in 203 gram of water?

Answers

The solution by dividing the number of moles of urea by the volume of the solution 0.637 M.

What is molarity?

Molarity is a unit used to measure the concentration of a solution. It is defined as the number of moles of a solute per liter of a solution.

The molarity of a solution can be calculated by dividing the number of moles of solute by the volume of the solution. In this case, the solute is urea (NH2CONH2) and the volume of the solution is 203 grams of water.
To calculate the molarity of the solution, we first need to calculate the number of moles of urea present in the solution. This can be done by using the formula:
Moles of urea = (mass of urea (g))/(molecular weight of urea (g/mol))
Therefore, the number of moles of urea present in the solution is:
Moles of urea = (7.78 g)/(60.06 g/mol) = 0.129 moles
Now, we can calculate the molarity of the solution by dividing the number of moles of urea by the volume of the solution (in liters):
Molarity = (0.129 moles)/(0.203 liters) = 0.637 M

To learn more about molarity
https://brainly.com/question/14469428
#SPJ4

in the synthesis of prussian blue paint, which compound was mixed with the pigment? calcium calcium carbonate oxygen nitric acid

Answers

In order to make Prussian blue paint, a variety of compounds must be mixed together. The pigment itself is made up of iron and potassium ferrocyanide. To this, calcium carbonate, oxygen, and nitric acid are added.

Calcium carbonate is a mineral that is commonly found in limestone and marble. It is also used in a variety of other products such as antacids and toothpaste. In the synthesis of Prussian blue paint, calcium carbonate is used to neutralize the nitric acid. This helps to create the desired color and also prevents the paint from being too acidic.

Oxygen is also added to the mix. Oxygen helps to accelerate the reaction between the iron and potassium ferrocyanide in order to create the desired color. It also helps to make the paint more durable and resistant to fading.

Finally, nitric acid is added to the pigment. Nitric acid helps to create the intense blue color of Prussian blue paint. It also helps to make the paint more resistant to light and water.

Learn more about Calcium carbonate at : https://brainly.com/question/13565765


#SPJ4

Identify the sugars in amygdalin. Select all that apply. Sucrose Glucose Fructose Ribose Identify the glycosidic linkage that connects the sugars. 1, 5' 1.3' 1.4' 1.6'

Answers

Amygdalin is a carbohydrate  which contains sugar  glucose and glycoscidic linkage that connects the sugars is 1.5'.

What is a carbohydrate?

A carbohydrate is defined as a bio-molecule which consists of carbon,hydrogen and oxygen atoms which are usually in the ratio of 2:1 with the empirical formula C[tex]_n[/tex](H₂O)[tex]_n[/tex].

This term is most commonly used in biochemistry as a synonym of saccharide which is a group of sugars, starch and cellulose.

They perform various functions in living organisms. They serve as an energy source and as well as structural components . They are a key component in providing nutrition and are found in wide variety of natural as well as processed foods.

Learn more about carbohydrates,here:

https://brainly.com/question/14614055

#SPJ4

Rank the radicals in order of decreasing stability. Most stable Least stable Answer Bank (CH3)2ĊCH2CH3 (CH3)2C=CHCH2 (CH3)2CHCH2CH2 (CH3)2CHCHCH3

Answers

(CH3)2ĊCH2CH3, (CH3)2CHCHCH3, (CH3)2CHCH2CH2,(CH3)2C=CHCH2 is the ranking order of the radicals in decreasing stability

In chemistry, a radical, also known as a free radical, is a molecule that contains one unpaired electron. Most molecules have an odd number of electrons, and the covalent bonds form bonds that hold the atoms together within a molecule are typically made up of pairs of electrons shared by the atomic nuclei connected by the bond. Radical was first used as an adjective in the 14th century, derived from the Late Latin radicalis, which was derived from the Latin radic-, radix, – this means "root." And the first uses of radical are all about literal roots, with the meaning "of, relating to, or going to proceed from a root." The most well-known free radical, oxygen, serves as the foundation for the formation of the majority of free radicals in the body. Oxygen is a naturally unstable molecule

Learn more about stability here:

https://brainly.com/question/10512475

#SPJ4

What is the chemical reaction for melting?

Answers

Ice melting is a physical transformation rather than a chemical reaction. The addition of heat energy causes the phase of ice to transition from solid to liquid during melting. However, there is no chemical reaction taking place while it is melting, therefore the molecular composition remains unchanged.

What happens when something melts?

Endothermic Reaction: An endothermic process is one in which additional heat is needed to complete the reaction. Ice melting is an example.

What is the name of the melting process?

A physical process called melting or fusing causes a substance to change its phase from a solid to a liquid. This happens when the solid's internal energy rises, usually as a result of the application of heat or pressure raises the material's temperature to the point of melting.

To know more about Endothermic Reaction visit:-

https://brainly.com/question/23184814

#SPJ4

Which statement is TRUE about elements in group 16?
They need 6 electrons to complete their octet.
They have 2 valence electrons.
The have an oxidation number of 2+
They have an oxidation number of 2-

Answers

Six electrons occupy the outermost shell in the electron configurations of the elements in Group 16 of the periodic table, which distinguish them from other elements.

What is true about elements in group 16?Any of the six chemical elements that make up Group 16 (VIa) of the periodic table—oxygen (O), sulfur (S), selenium (Se), tellurium (Te), polonium (Po), and livermorium—is referred to as an oxygen group element (Lv). Tellurium was given its place by 1865, and polonium was discovered in 1898. The first three members of the group were connected as early as 1829, with tellurium being allocated its position. Livermorium, the sixth member of Group 16, was produced in a particle accelerator by Russian and American researchers in 2000.After hydrogen, helium, and neon, oxygen is estimated to make up about 4 percent of all atoms in the universe. However, as hydrogen atoms make up the majority of the remaining atoms and helium makes up the majority of the remaining atoms, the significance of this ranking is negligible.

To Learn more About periodic table, refer To:

https://brainly.com/question/15987580

#SPJ1

What is the first step of an enzymatic reaction?

Answers

The first step of an enzymatic reaction is, substrate molecule (S) collide with enzyme(E) and react to form an intermediate compound called the enzyme-substrate (E–S) complex.

Enzymatic catalysis of a reaction between two substrates. The enzyme provides a template on which the two substrates are brought together in the correct position and orientation to react with each other. Enzyme-catalyzed reactions take place in at least two steps.

In the first step, an enzyme molecule (E) and a substrate molecule or molecules (S) collide and react to form an intermediate called an enzyme-substrate (E–S) complex. (This step is reversible, as the complex can dissociate into the original substrate or substrates and the free enzyme.) Once the E–S complex is formed, the enzyme is able to catalyze the formation of the product (P), which is then released from the enzyme surface:

S+E→E–S

To learn more about enzymatic reaction, visit:

https://brainly.com/question/11276447

#SPJ4

Other Questions
6. Cardiomyopathy is a serious condition in which the heart in enlarged that does not return to normal size after a break from training.truefalse A die was rolled eight times. The rolls were 2, 2, 3, 4, 4, 5, 6, and 6. What is the mean absolute deviation for this data? A) 1 1/4 B) 1 2/3 C) 4 D) 10 (B is not 12/3) 1. When you use a credit card, where does the money come from to pay for the goods you aregetting? According to the selection, which two aspects make it difficult to know if Keckley made the clothes left from the First Lady's CollectionA. They did not use tags on the clothesB. She liked several different styles C. Fabrics were often reusedD. Clothes were often shared among people.E. There were several designers at that time Supposed B is the midpoint of line AC. Use the given information to find the missing measure. AB = 6Y -14, BC = 10-2Y 2Y, what is AC School in Japan are very different from American schools. Which is the principal part of the verb are? Which structure is represents a ribosome Which climate zone in Brazil records the highest temperatures?semiaridtropical rain foresttemperatetropical wet/dry Explain with examples why do people study Social Psychology? rewrite the sentences using the words given4-jane is a big fan of latim music INTERESTED5-My friends don t really like pop music anymore INTO A triangle has vertices A(-2,1), B(2,4), C(4,1).Find the area of the triangle. three ways in which women can protect themselves against abuse, lo task Tina walks 1/2 mile in each 1/3 hour.What is Tina's walking rate? 6 miles per hour5 miles per hour3/2 miles per hour16 mile per hour CAN SUM1 PLEASE HELP ME LIKE SERIOUSLY OMG Aidan makes 12 bracelets on Monday. He makes 8 more bracelets each day from Tuesday through Thursday. How many bracelets does Aidan have in all by the end of the day on Thursday? *5 points What types of technology are now available that would help reduce the negative impacts of sandstorms To investigate the relationship between age and preference for two mayoral candidates in an upcoming election, a random sample of city residents was surveyed. The residents were asked which candidate they preferred, and each resident was classified into one of three age-groups. The test statistic for the appropriate hypothesis test was 3.7408. Approximately what is the probability that the observed responses would be as far or farther from the expected responses if there is no association between age-group and preference? A. 0.0001 B. 0.1541 C. 0.2908 D. 0.5873 E. 0.7117 If O is an angle in standard position and its terminal side passes through the point(3,-1), find the exact value of tan 0 in simplest radical form.please help ! I WILL GIVE BRAIN LIST TO BEST ANSWER AND HURRY NO LINKS OR SCAMS ANSWER CORRECTLY!!!!!!! The map shows the plate tectonic and water features in East Africa.How will Earths processes and water movement affect Earths surface along the East African rift zone?Select all of the correct answers.(MORE THAN ONE)As the plates move together, Lake Victoria will flood and erode the land along the rift.As the plates move together, Lake Victoria will flood and erode the land along the rift.As the plates move apart, nearby sea and ocean water will flood and erode the land.As the plates move apart, sea levels will rise in the Red Sea, eroding coastlines.As the plates move apart, seawater will erode the land underneath the rift zone, creating caves.As the plates move together, tsunamis will flood and erode the land.As the plates move apart, volcanic activity will shape the land along the rift as magma rises through plate fissures.Skip to navigation A quadrilateral has vertices at (1.4).(7,3), (3, -5), and (8,4). Thequadrilateral is dilated by a scalefactor of 3.5 with the origin as itscenter. What are the coordinates ofthe vertices of the image of thequadrilateral?