The number of electrons in each shell of an N-14 atom in the ground state is 7.
The N-14 atom is nitrogen isotope. It has seven protons and seven neutrons. N-14 is a neutral atom having seven electrons. An atom's first shell has only two electrons which occupies an s orbital.
The total number of neutrons which are present in the nucleus are equal to the difference among the atomic number and mass number of an atom.
The nitrogen-14 isotope is having mass number as 14 and an atomic number as 7.
Nitrogen-14 is one of two stable isotopes of nitrogen which are non-radioactive. It makes about 99.63% of nitrogen which is naturally present. Nitrogen-14 is stable nuclides which have both an number of seven protons and seven neutrons. It is the only one which forms up more than half of its element.
To learn more about atoms,
brainly.com/question/75208
#SPJ1
Define volume.
length x width x height
the mass of liquid required to fill a container
the space occupied by a liquid
the space occupied by mass
Length x width x height can define the volume of an object.
What is the volume of an object?Volume can be defined as the space which is occupied by an object in space. It is also called the capacity of the object. The volume of an object also refers to the amount of space it fills. Very large Volumes can be measured in cubic meters (m3) while the other hand, while the Smaller volumes can be measured in cubic centimeters (cm3) as well as cubic millimeters (mm3). Volume has three dimensions i.e. length, width, and height whereas area has two dimensions i.e. length and width. We can calculate the volume of an object with the help of a formula i.e. Volume = length × width × height.
So we can conclude that volume of an object can be calculated with the help of the formula i.e. Volume = length × width × height.
Learn more about volume here: https://brainly.com/question/1972490
#SPJ1
HELP!! WILL GIVE 100 points.
Which term describes this molecular shape?
A. Tetrahedral
B. Linear
C. Trigonal Planar
D. Bent
Answer:
C. trigonal Planar
Explanation:
Tetrahedral is 4 connected
Bent is 2 connected with a lone pair
Linear is 2 connected in a line
Trigonal Planar is the one with 3 connected.
Answer:
C: Trigonal Planar
Explanation:
Tetrahedral is four connected
Bent is 2 linked with a lone pair
Linear is two connected in a line
Trigonal Planar is the one with 3 connected.
At an old gas station, gasoline leaks from an underground storage tank. what is the classifcation?
Answer:
Toxic pollution
Explanation:
Gasoline is a harmful chemical
Two quantities in the ideal gas equation that are directly proportional: _______ and ________
Two quantities in the ideal gas equation that are indirectly proportional: _______ and _______
Two quantities in the ideal gas equation that are directly proportional are Pressure and Temperature
In ideal gas law, PV = nRT
A quantity can be directly or indirectly proportional to each other. In case of directly proportional, if one quantity increases other would also increases and vice versa. In the case of indirectly proportional, the opposite happens i.e., increase in one quantity would result in decrease of another.
As we can see in the ideal gas law, increase in pressure (P) would increase number of moles (n) and Temperature (T). Similarly, increase in volume (V) would also increase number of moles (n) and Temperature (T).
If the law was rearranged, we can observe that increase in pressure would decrease the volume and vice versa.
To know more about Ideal gas law
https://brainly.com/question/13821925
#SPJ1
Which are aspects covered by Bohr’s atomic model?
Aspects covered by Bohr's atomic model are : Electrons do not have energy, The energy is determined by the orbit.
Features of Bohr's atomic model are:
1) Electrons revolve around the nucleus in orbits .Each orbit has a definite energy called as energy shell or energy level. Energy of electrons is determine by the energy levels.
2) Orbits is designated as K, L, M, N shell.
3) When an electron jumps from a higher energy level to lower level it emits energy and when it jumps from lower to higher energy level it absorbs energy.
thus, Aspects covered by Bohr's atomic model are : Electrons do not have energy, The energy is determined by the orbit.
To learn more about Bohr's atomic model here
https://brainly.com/question/7671823
#SPJ1
Answer:
It’s the 1st option and 4th option.
Explanation:
use your measured conductances (currents) for isomolar solutions of the substances you tested and the conductances (currents) for pure water and ethyl alcohol to distinguish among strong electrolytes (se), weak electrolytes (we), and nonelectrolytes (ne).
The difference between strong electrolytes (se), weak electrolytes (we), and nonelectrolytes (ne).
A solution or solute that totally, or nearly completely, ionizes or dissociates in a solution is referred to as a strong electrolyte.
In the solution, these ions act as effective conductors of electric current. A substance that is a good conductor of electricity while in aqueous solution was the original definition of a "strong electrolyte."
A solution is considered to be a weak electrolyte if only a small percentage of the dissolved solute is present as ions. An equilibrium between the reactants and products is depicted by a double arrow in the equation for the ionization of a weak electrolyte.
Strong electrolytes totally ionize (100%), whereas weak electrolytes only partially ionize (often between 1 and 10%). In other words, whereas for weak electrolytes, the main species in solution is the unionized molecule itself, ions are the main species in solution for strong electrolytes.
A substance is referred to as a nonelectrolyte if it doesn't conduct electricity in either the molten or watery form. Many molecules, including ethanol and sugar, are nonelectrolytes. These substances do not release ions when they dissolve in water.
To know more about electrolyte, click on the link below:
https://brainly.com/question/17089766
#SPJ9
7. Identify the number of molecules in.
2NH3
Answer:
2 molecules
Explanation:
thete are 2 moleculed in 2NH3
Mark is making a model of a living plant cell. The following objects are available to Mark for his model:
a cloth bag
a wire cage
a solar panel
a battery with wires
a zippered sandwich bag
Mark wants to represent the function of different plant cell parts by using objects that have functions similar to the cell’s parts.
Identify three objects Mark can use in his model that each represent a different plant cell part.
The solar panel would represent energy, so a solar panel would be one of them!
Studying cell illness models helps researchers better understand how diseases arise, which in turn helps them find novel molecular targets for particular therapeutics. Cell disease models can also be utilized to assess prospective therapeutic strategies. Thus, option C is correct.
What is the model of a living plant cell?The two-piece plant cell model depicts the normal plant cell's structures as seen through an electron microscope. The cytoplasm and all significant organelles are depicted in raised relief and colour on the plant cell. The plant cell model has the following features: cellular wall.
The process of generating a digital reproduction of each procedure, piece of machinery, and workflow within a plant is known as “plant modelling.”
Therefore, A solar panel would be one of them, since it would stand in for electricity.
Learn more about plant cell here:
https://brainly.com/question/29276890
#SPJ2
HELP WILL GIVE BRAINLIST
How many moles of calcium are present in 199 grams of calcium?
Answer: The answer is 40.078
Explanation: Ezzy
Answer:
mol CCl4 = 1.294 mol
Explanation:
moles (n) = (mass)/(molar mass)
∴ mass = 199 g CCl4
∴ molar mass = 153.82 g/mol
⇒ nCCl4 = 199 gCCl4 / 153.82 g/mol
⇒ nCCl4 = 1.294 mol CCl4
zinc, copper, lead, and mercury ions are toxic to atlantic salmon at concentrations of 6.42 × 10–2 mm, 7.16 × 10–3 mm, 0.965 mm, and 5.00 × 10–2 mm, respectively. what are the corresponding concentrations in milligrams per liter?
The concentration of each substance in mg/L are;
Zinc - 9.8 * 10^-4 mg/L
Copper - 1.1 * 10^-4 mg/L
Lead - 4.7 * 10^-3 mg/L
Mercury - 2.5 * 10^-4 mg/L
What is concentration?Let us recall that the term that is called concentration is used to describe the amount of substances that is present. Thus, there are several units of concentration that are in common use to day and these include;
PercentageMolarityMolalityNormalityIn this case we are asked to convert the concentration of the object as it has been given in mM to mg/L as we can see above in the question.
We have that;
RMM mg/L = 1mM
Let us now convert each one;
Zinc = 1/65 * 6.42 × 10^–2 mm
= 9.8 * 10^-4 mg/L
Copper = 1/63.5 * 7.16 × 10–3 mm
= 1.1 * 10^-4 mg/L
Lead = 1/207 * 0.965 mm = 4.7 * 10^-3 mg/L
Mercury = 1/201 * 5.00 × 10–2 mm = 2.5 * 10^-4 mg/L
Learn more about concentration:https://brainly.com/question/10725862
#SPJ1
Imagine you were given a mixture of iron filings and sand. Explain how you could prove this combination of substances is a mixture. Give some procedures you could use to prove this fact
If I was given a mixture of iron filings and sand, the explanation I would give to prove that it is a mixture is that I would show that they are a homogeneous mixture.
The procedure that I would give to show they are a mixture is by showing how they can be separated and this is through the use of a magnet.
This is because sand is non-magnetic and iron fillings can be used as magnets.
What is a Mixture?This refers to the material that contains two or more elements that are NOT chemically bonded.
Hence, we can see that the explanation of mixture is given below.
Read more about mixtures here:
https://brainly.com/question/24869423
#SPJ1
Who developed the expression for the line spectrum of hydrogen to include lines in the ultraviolet and infrared portions of the electromagnetic spectrum?.
Who evolved the expression for the broad spectrum of hydrogen to encompass lines within the ultraviolet and infrared portions of the electromagnetic spectrum : Johannes Rydberg
Electromagnetic Spectrum: The electromagnetic (EM) spectrum is the range of all varieties of EM radiation. Radiation is the power that travels and spreads out because it is going – the visible light that comes from a lamp in your own home and the radio waves that come from a radio station are styles of electromagnetic radiation. Scientists name them all electromagnetic radiation. The waves of energy are known as electromagnetic (EM) due to the fact they've oscillated in electric-powered and magnetic fields. Scientists classify them through their frequency or wavelength, going from high to low frequency (quick to long wavelength).
The electromagnetic spectrum observed over a century ago is the idea behind our universe(Opens in a new tab). Without it we would not be able to see, the stars would not shine, and existence would not exist. It is one of the most important concepts that govern everything around us. Electromagnetic radiation occurs whenever a charged particle changes speed with an electron, i.e., increases or slows significantly. The power of the generated electromagnetic radiation comes from charged particles and is therefore lost with use.
Learn more about the electromagnetic spectrum here:
https://brainly.com/question/23423065
#SPJ1
does anyone know how to answer this question?
According to the given statement The density of the element is 6.82 g/ml.
What is Density ?Density is the measure of how firmly a material is packed. It has such definition since it is the mass per unit volume. Numeral for density D or The formula for calculating density is m/V, where m is the mass and V is the volume of the object.
What is unit of density?Grams per cubic centimeter are indeed a typical measurement unit for density. For example, while Earth has a density of up to 6.5 grams, water has a density of 1 grams per cubic centimeter. Another method to state density is in kilograms per cubic meters (in metre-kilogram-second or SI units).
Briefing:Mass of solid (M)= 10.23g
Initial volume of water V[tex]_1[/tex] = 20 ml
Final volume of water V[tex]_2[/tex] = 21.5 ml
Volume of solid (V) = V[tex]_2[/tex]– V[tex]_1[/tex]
= 21.5 - 20
= 1.5 ml
Density of element (D) = M / V
= 10.23g / 1.5 ml
= 6.82 g/ml.
To know more about Density visit:
https://brainly.com/question/6107689
#SPJ13
A pipette has 9 milliliters of liquid before dispensing. Pipette A has 5 milliliters of liquid after dispensing. Pipette B has 4 milliliters after dispensing.
Which pipette above shows that 4 mL of liquid has been dispensed?
Based on the initial and final volume of solution in each pipette, pipette A shows that 4 mL of the liquid has been dispensed.
What volume solution has been dispensed from each of the pipettes?A pipette is a lab apparatus that is used for dispensing liquids.
The volume of the liquid dispensed from the pipette is obtained bt subtraction of the initial volume of solution from the final volume of solution in the pipette.
Comparing the volume of solution dispensed from each pipette:
Volume dispensed from pipette A = 9 mL - 5 mL
Volume dispensed from pipette A = 4 mL
Volume dispensed from pipette B = 9 mL - 4 mL
Volume dispensed from pipette A = 5 mL
Therefore, the volume of solution dispensed from each pipette is as calculated above.
Learn more about pipettes at: https://brainly.com/question/25311014
#SPJ1
How many atoms are present in 4.56moles of sulfur?
Answer:
2.75 x 10^24 atoms
Explanation:
1 mole = 6.022 x 10^23 atoms
4.56 moles has:
4.56 x 6.022 x 10^23 = 2.75 x 10^24 atoms
em
RT In K
nF
where E is standard
electrode potential of a reaction, increasing the
yalue of K will
12. From E =
E is standard the electrode potential of a reaction, increasing the value of K will Increase the forward reaction.
A measure of the reducing power of an element or compound. The IUPAC Gold Book defines it as Split the reaction into two half-reactions. where n is two. The following example shows how to use the Nernst equation to calculate the potential of an electrochemical cell under non-standard conditions.
If both half-reactions have different numbers of electrons multiply both equations by the appropriate number so that n is the same in both equations, then use this value of n in the equations before generating electricity. increase. The energy used is released during spontaneous chemical reactions. When the applied external potential is greater than the Ecell of the electrochemical cell, the reaction is reversed. It started working as an electrolytic cell and vice versa.
Learn more about A reaction here:-https://brainly.com/question/24795637
#SPJ1
1. If the Moxie's tank has an initial pressure of 50 atm in the winter, what will be * 1 point
the pressure in the summer?
The pressure of the Moxie's tank in the summer will be 110.5 atm.
What is pressure law?The pressure law states that for a given mass a gas, the pressure exerted on the sides of its container is directly proportional to its absolute temperature provided the volume is constant.
Mathematically, this law can be written as;
P₁/T₁ = P₂/T₂
where;
P₁ is the initial pressureP₂ is the final pressureT₁ is the initial temperatureT₂ is the final temperatureFrom formula above, as the temperature of the gas increases, its pressure increases as well.
Thus, the pressure that will be observed in the Moxie's tank during the summer will be greater than 50 atm since the temperature in summer is greater than the temperature in winter.
Learn more about pressure law here: https://brainly.com/question/25736513
#SPJ1
The complete question is below:
If the Moxie's tank has an initial pressure of 50 atm in the winter, what will be * 1 point
the pressure in the summer?
A. 5.88 atm
B. 22.6 atm
C. 110.5 atm
You want to determine how many
grams are in 43 mg.
43 mg
[?]
Which choice goes in the green
box to cancel out mg?
A. 1 mg B. 10-³ g C. 10³ g
Answer:
Explanation:
cg c g cv
The choice that goes in the green box to cancel out mg is 10⁻³ gram. The correct option is B.
How to evaluate for the gramsConversion Factor: To convert from milligrams (mg) to grams (g), we use the conversion factor that 1 gram (g) is equal to 1000 milligrams (mg), or 1 g = 1000 mg.
To cancel out the unit "mg" and obtain the desired unit "g," we need to use the conversion factor with the appropriate power of 10. In this case, since we want to cancel out milligrams (mg), which is 10⁻³ times smaller than a gram (g), we use the factor 10⁻³ g/mg.
Therefore, by multiplying 43 mg by the conversion factor 10⁻³ g/mg, we can cancel out the milligram unit and find that there are 0.043 grams in 43 milligrams.
Read more about grams here:https://brainly.com/question/14519202
#SPJ2
show that the units of kinetic energy and of gravitational potential energy are the same
The unit of both types of energy is the joule (kg × m² × s⁻²).
Show the units of kinetic energy
The equation for kinetic energy is/2 × m × v²
[K] = kg × (m/s)²
[K] = kg × m² × s⁻² = J
Show units of gravitational potential energy
The formula for the potential energy of gravity is: g × h
[G] = kg × m/s² × m
[G] = kg × m² × s⁻² = J.
Gravitational potential energy is the energy stored in an object due to its height above the ground. This depends on the mass of the object, the acceleration due to gravity, and the height of the object. Kinetic energy is the energy that an object has when it moves. One of the most important similarities between potential energy and kinetic energy is that they can be converted into each other's energy forms. When a force is applied to potential energy, it is converted into kinetic energy.
Learn more about Kinetic energy here:-https://brainly.com/question/25959744
#SPJ1
I don't know this lol
Answer:
Atoms that contain an unstable combination of neutrons and protons, or excess energy in their nucleus.
Explanation:
cuz
What is the complete ionic equation for 2 HCIO(aq) + Ca(OH)₂(aq) → 2 H₂O(/) + Ca(CIO)2(aq)
The complete ionic equation Ca(OH)2 + HClO4 → H2O + Ca(ClO4)2.
A complete ion equation describes all ions dissociated in a chemical reaction. The net ion equation cancels out ions appearing on either side of the reaction arrow. This is because they do not inherently participate in the desired reaction. An annihilated ion is called a spectator ion.
The net ionic equation describes only the species participating in the reaction while the full ionic equation also includes the spectator ion. The net ion equation must be balanced by both mass and charge. Mass balance means ensuring that the mass of each element on the product side and the educt side is equal.
Learn more about Ionic equation here:-https://brainly.com/question/13879496
#SPJ1
A photon has an energy of 8.42 eV.
What is its frequency?
The frequency of photon is 2.04 × [tex]10^{15}[/tex] Hz.
E = h × f
Here, E = energy, given = 8.42 eV = 8.42 × 1.6 ×[tex]10^{-19}[/tex] J = 1.35 × [tex]10^{-18}[/tex] J
h = plank's constant = 6.626 × [tex]10^{-34}[/tex] Js
f = frequency
So, f = E/h
f = 1.35 × [tex]10^{-18}[/tex] J/6.626 × [tex]10^{-34}[/tex] Js
f = 2.04 × [tex]10^{15}[/tex] Hz
Hence, the frequency of photon is 2.04 × [tex]10^{15}[/tex] Hz.
Frequency is the quantity of occurrences of a repeating occasion in line with unit of time. it is also every now and then known as temporal frequency to emphasize the comparison to spatial frequency, and regular frequency to emphasize the assessment to angular frequency.
The variety of periods or cycles according to second is called frequency. The SI unit for frequency is the hertz (Hz). One hertz is similar to one cycle consistent with second.
Frequency is an critical parameter used in technology and engineering to specify the temporal charge of alternate observed in oscillatory and periodic phenomena, which include mechanical vibrations, audio alerts, radio waves, and light.
Learn more about frequency here:- https://brainly.com/question/254161
#SPJ1
electrons are transferred from one atom to another
a) there are several reagents that can be used to effect addition to a double bond, including: acid and water, oxymercuration–demercuration reagents, and hydroboration–oxidation reagents.
The selection of hydroboration-oxidation reagents to carry out the transformation was made for the following reasons:
Reagents for oxymercuration and demarcation produce the Markovnikov product.
The anti-Markovnikov product of addition is produced by reagents for hydroboration oxidation.
Anti-Markovnikov product without sigmatropic rearrangement is necessary for the reaction.
Acid and water are added to produce the Markovnikov product.
The formation of alcohol depends on the process of hydroboration-oxidation, it should be mentioned. Instead of employing other reagents, it is required for the transformation because hydroboration-oxidation reagents produce the anti-Markovnikov product of addition.
The conversion of alkenes into neutral alcohols is accomplished through the organic chemical reaction known as hydroboration oxidation. This is accomplished via a two-stage procedure that entails both an oxidation and a hydroboration step. An addition is made as a net result.
Learn more about hydroboration oxidation :
https://brainly.com/question/26418520
#SPJ4
Where are the most reactive metals located?
Upper left of periodic table
Lower left of periodic table
Upper right of periodic table
Lower right of periodic table
Answer: Lower Left!
Explanation: I just took the quiz.
Calculate the densities of the objects using the volumes found by displacement. Record your data
The densities of the substances are;
Aluminum bar = 2.6 g/ml
PE rod = 0.91 g/mL
Iron bolt = 5.65 g/mL
What is density?The term density is defined as the ratio of the mass to the volume of the object. We know that mass is an intrinsic property. This means that the density of the object can be used to identify what the object that is under study is. Let us now try to find the density of each of the objects.
In this case, we have the mass and the volumes of the objects as they have been shown in the table that have here. We can now be able to find the volume of each of the objects.
Density of aluminum bar = 39 g/ 15 g/mL = 2.6 g/ml
Density of the PE rod = 21 g/23 mL = 0.91 g/mL
Density of iron bolt = 39 g/6.9 mL = 5.65 g/mL
Learn more about density:https://brainly.com/question/15164682
#SPJ1
3. Calculate the number of atoms in a sample of carbon that has a mass of
276.23amu.
Answer:
1.39 x 10^25 atoms
Explanation:
12 amu of C has 6.02 x 10^23 atoms
so 276.23 amu has
(276.23)(6.02 x 10^23)/(12) = 1.39 x 10^25 atoms
7. Compare and contrast mixtures and compounds. Which statement is true about mixtures and compounds? a. Both mixtures and compounds are the same throughout. c. Mixtures must be separated by chemical methods and compounds by physical methods. b. Mixtures and compounds are made of two or more elements in a definite proportion. d. Mixtures contain two or more elements physically combined and compounds contain two or more elements chemically combined.
The statement that accurately contrast a compound and a mixture is; Mixtures contain two or more elements physically combined and compounds contain two or more elements chemically combined.
What is a mixture?The term mixture has to do with a combination of two or more substances that are not chemically combined hence they can easily be separated by the use of physical methods. Hence they are not in any way compounds.
A compound is a substance that has been formed by the chemical combination of the atoms of elements. This implies that the components of a compound can not be separated by physical methods.
Learn more about mixtures:https://brainly.com/question/24898889
#SPJ1
a sample of xenon gas occupies a volume of 7.72 l at 421 k. if the pressure remains constant, at what temperature will this same xenon gas sample have a volume of 4.54 l?
The Xenon gas sample will have the volume of 4.54L at the temp of 247.26 k.
When pressure is constant, a gas's volume and temperature are directly proportional.
When pressure is constant, the volume to temperature ratio remains constant.
The term "Charles' law" or "Gay-Lussac's law" refers to this relationship.
Isobaric processes are those that operate at constant pressure.
V ∝ T (P constant)
V1/T1 = V2/T2 = constant
Here,
V1= 7.72l
T1 = 421k
V2 = 4.54l
T2 = ?
7.72/421 = 4.54/T2
7.72 × T2 = 4.54 × 421
T2 = 4.54 × 421
7.72
T2 = 247.26 k
To learn more about Charles law visit the link:
https://brainly.com/question/16927784?referrer=searchResults
#SPJ9
a block is made of a metal with the density of 5 g/ml. It displaces 2ml of water. What is the blocks mass?
(Not chemistry, it is science)
Answer:
10 grams
Explanation:
The mass equals the density times the volume it displaces, so 5*2 = 10 grams. If you look at the units, you will see that they also cancel out.
you have 5 grams / ml, and 2 ml, so when 5 grams/ml and 2 ml are multiplied, the result is 10 grams*ml/ml, and since ml/ml = 1, the final unit of the answer would be 10 grams.