Starting with a 2n=32 cell, at the end of meiosis II there will be four cells, each n=16.
Starting with a 2n=32 cell, meiosis will result in the formation of four cells at the end of meiosis II. In meiosis I, the chromosome number is reduced by half from 2n to n. So, the initial 2n=32 cell will have two sets of 16 chromosomes. During meiosis I, the homologous chromosomes will separate, resulting in two haploid cells, each with n=16 chromosomes.
In meiosis II, the sister chromatids will separate, resulting in the formation of four cells. Since each cell now has only one copy of each chromosome, the chromosome number remains n=16. Therefore, the answer is four cells, each n=16.
It is important to note that meiosis results in genetic diversity due to crossing over during meiosis I and random alignment of chromosomes during meiosis II. This genetic variation is important for evolution and the survival of species. Additionally, errors during meiosis can lead to chromosomal abnormalities such as Down syndrome, which occurs when there is an extra copy of chromosome 21.
For more such questions on meiosis II, click on:
https://brainly.com/question/30150685
#SPJ11
3. The reaction A + 2 B → products has the rate law: rate = k[A][B]3. When the
concentration of B is doubled, while that of A is unchanged, by what factor will the
rate of reaction increase?
A. 2 B. 4 C. 6 D. 8 E. 9
When the concentration of B is doubled while A is unchanged, the rate of reaction increases by a factor of 8. This corresponds to option D.
The rate law for a chemical reaction provides information about the relationship between the rate of reaction and the concentrations of the reactants. In this case, the rate law for the reaction A + 2B → products is given by rate = k[A][B]^3, where k is the rate constant.
To determine how the rate of reaction changes when the concentration of B is doubled while A is unchanged, we can use the following formula:
rate2/rate1 = ([A][2B]^3)/([A][B]^3)
Since the concentration of A is unchanged, it cancels out in the numerator and denominator. We can simplify the formula to:
rate2/rate1 = (2B/ B)^3
Simplifying further, we get:
rate2/rate1 = 2^3rate2/rate1 = 8.
For such more questions on Rate law:
https://brainly.com/question/26127112
#SPJ11
how much difference does it make in your results if the alue you use for the specific heat of the calorimeter cup is off by as much as
The difference in your results when the value you use for the specific heat of the calorimeter cup is off can significantly impact the accuracy of your calculated results.
The specific heat of the calorimeter cup is used to determine the heat absorbed or released by the calorimeter during an experiment. If the value you use for the specific heat is incorrect, it will lead to inaccurate calculations for the heat absorbed or released by the substances being tested. This, in turn, can affect the determination of other properties such as enthalpy change, reaction rates, and equilibrium constants.
It is essential to use an accurate value for the specific heat of the calorimeter cup to obtain precise and reliable results in your experiments. If the value is off, it can significantly impact the accuracy of your calculated results, leading to potential errors in your experimental conclusions.
To know more about specific heat, visit;
https://brainly.com/question/27991746
#SPJ11
[Post lab Q]: Q3 explains why the H NMR spectra are complex. How many chemically different hydrogen atoms are present in camphor?
There are 10 chemically different hydrogen atoms are present in camphor and all these are present in above figure. The H NMR spectra are complex due to coupled protons..
NMR spectroscopy is used more than ¹³C NMR, because proton spectra are much easy to obtain than carbon spectra. The different of factors of complexity of the NMR spectra are non-equivalent protons, chemical shifts of coupled protons and presence of chiral centre etc. See the above figure, there are 10 different types of protons in camphor molecule.
So, there will be 10 signals in its ¹H-NMR spectrum. For first H-NMR, multiplicity of a peak = (n+1) where n is the number of equivalent H's on the just next carbon. As for example, for the H labeled 1, there is only first H at the next carbon, so the splitting is (1+1) = d (doublet). Again, for the H labeled 4, there are 2 different types of H at one neighbouring carbon and 1 different type of H at the another neighbouring carbon. Since multiplicity is a multiplicative property, so the splitting is (1+1)x(1+1)x(1+1) = ddd = m (multiplet)
s = singlet. Hence, H NMR spectra are more complex.
For more information about NMR spectra, visit :
https://brainly.com/question/31455708
#SPJ4
Give an example of an amphiprotic compound.
A) sulfuric acid
B) water
C) potassium chloride
D) ammonia
B) Water is an example of an amphiprotic compound. It can act as both an acid and a base, donating or accepting a proton depending on the reaction conditions. For example, in the presence of a strong base like sodium hydroxide, water can act as an acid and donate a proton to form hydroxide ions:
[tex]H_{2}O[/tex]+ [tex]NaOH_{}[/tex]-> [tex]H_{2}O[/tex]- + [tex]Na_[/tex]+
On the other hand, in the presence of a strong acid like hydrochloric acid, water can act as a base and accept a proton to form hydronium ions:
[tex]HCL_{}[/tex] + [tex]H_{2}O[/tex]-> [tex]H_{3}O[/tex]+ + [tex]Cl_{[/tex]-
Amphiprotic compounds are substances that can act as both acids and bases, depending on the reaction conditions. This means that they are capable of donating or accepting protons (H+) in a chemical reaction. The term "amphiprotic" comes from the Greek words "amphi" (meaning "both") and "protos" (meaning "first" or "primary").
In addition to water, there are many other amphiprotic compounds. Some common examples include amino acids (which are the building blocks of proteins), hydrogen carbonate ions ([tex]HCO_{3}[/tex]-), and hydrogen sulfate ions ([tex]HSO_{4}[/tex]-).
Amphiprotic compounds are important in many chemical reactions. For example, they can act as buffer solutions, helping to maintain a constant pH level in a system. They are also involved in acid-base titrations, where a solution of known concentration is used to determine the concentration of an unknown solution.
It's worth noting that not all compounds can act as both acids and bases. For example, strong acids like hydrochloric acid ([tex]HCL_{}[/tex]) and strong bases like sodium hydroxide ([tex]NaOH_{}[/tex]) are not amphiprotic. These substances can only act as either an acid or a base, respectively.
To know more about buffer solutions
brainly.com/question/24262133
#SPJ11
The esterification reaction is carried out by removing water azeotropically. Why can't calciu chloride pellets be used instead to remove water? Explain.
Because calcium chloride pellets absorb moisture from the air rather than the reaction mixture, they cannot be employed to remove water from the esterification reaction.
Desiccant calcium chloride pellets are routinely used to absorb moisture from the air. They cannot, however, be utilized to remove water from an esterification reaction because their water absorption is not selective.
It means that, calcium pellets will absorb the moisture from the surroundings including the air. In contrast, azeotropic distillation employs a solvent to generate an azeotrope with water that can be removed from the reaction mixture, essentially removing water from the reaction.
To know more about esterification reaction, visit,
https://brainly.com/question/28118164
#SPJ4
How does carbon go back into the atmosphere
Answer:
Carbon is released back into the atmosphere when organisms die, volcanoes erupt and even when fossils are buried
when using the benedict's assay, which color would indicate the most reducing sugar present? when using the benedict's assay, which color would indicate the most reducing sugar present? orange green blue reddish brown
The Benedict's assay to test for the presence of reducing sugars, the color change that indicates the highest concentration of reducing sugars is reddish-brown. This color change is due to the formation of a copper(I) oxide precipitate as the sugar reacts with the Benedict's reagent.
However, a positive outcome in the Benedict's assay does not guarantee a favourable outcome in the Barfoed's assay. The fact that not all reducing sugars are monosaccharides or disaccharides must always be kept in mind. It is essential to do both tests in order to accurately identify the type of carbohydrate present in the sample because the concentration and acid used in the Barfoed's assay may also have an impact on the results.
Carbohydrate tests are routinely carried out to determine whether a sample contains a specific type of carbohydrate or not. Benedict's test and Barfoed's assay are two such methods that are widely used to detect reducing sugars in a sample. Benedict's assay is used to identify the monosaccharides and some disaccharides, whereas Barfoed's assay is particularly made to do so.
Learn more about Benedict's assay here
https://brainly.com/question/30564552
#SPJ11
A chemical formula that shows the arrangement of atoms in a molecule or a polyatomic ion
(structural formula, Single covalent bond, polyatomic ion, bond dissociation energy, coordinate covalent bond)
Structural formula is a chemical formula that shows the arrangement of atoms in a molecule or a polyatomic ion. So, first option is right one.
The VSEPR model theory can predict the structure of almost all non-metallic central atoms or polyatomic ions and many molecules with central metal atoms and polyatomic ions. The structural formula shows the arrangement of atoms in a molecule. For example, the above figure shows the structural model of the CH₃CHO molecule. Thus, the chemical formula showing the arrangement of atoms in a molecule or a polyatomic ion (polyatomic ion is a group of atoms that have a positive or negative charge and are covalently bonded as a unit) each dash between a pair of atoms indicates a pair of shared electrons or bond between ions or atoms.
For more information about structural formula, visit :
https://brainly.com/question/13027903
#SPJ4
The chemical formulas of molecular compounds show the number and type of atoms in each molecule.
(Never True, Always True, Sometimes True)
The chemical formulas of molecular compounds show the number and type of atoms in each molecule Sometimes True.
Molecular compounds are formed when two or more atoms of different elements share electrons to form a molecule. The chemical formula of a molecular compound shows the number and types of atoms in a molecule. However, it may not always indicate the actual arrangement of atoms within the molecule.
For example, the chemical formula for glucose is C6H12O6, indicating that it has six carbon atoms, twelve hydrogen atoms, and six oxygen atoms. However, it does not indicate the actual arrangement of these atoms in the molecule, which is a complex, three-dimensional structure.
Learn more about molecular compound
https://brainly.com/question/30328923
#SPJ4
What unifying theme does Bradford Assay connect to
The Bradford Assay is a unifying theme in the field of biochemistry, as it is a widely used method for determining protein concentration. This colorimetric assay relies on the interaction between the protein sample and a dye, Coomassie Brilliant Blue G-250, which allows researchers to quantify the amount of protein in their samples. The assay is rapid, simple, and compatible with various experimental conditions.
The unifying aspect of the Bradford Assay lies in its ability to provide a common method for scientists from diverse research backgrounds to measure protein concentrations in their experiments. This standardized procedure is crucial for maintaining accuracy and comparability of results across different studies. Furthermore, the Bradford Assay is applicable to a broad range of research areas, such as molecular biology, cell biology, and biotechnology, fostering a sense of unity among researchers in these fields.
In conclusion, the Bradford Assay serves as a unifying theme in biochemistry by offering a reliable and widely used method for protein quantification. It bridges the gap between various research areas, allowing scientists to effectively collaborate and build upon one another's work. The Bradford Assay is essential in maintaining consistency, accuracy, and reproducibility of protein measurements across studies, thus contributing to the advancement of scientific knowledge.
learn more about Bradford Assay here
https://brainly.com/question/30215297
#SPJ11a
The Bradford Assay is a unifying theme in the field of biochemistry, as it is a widely used method for determining protein concentration.
This colorimetric assay relies on the interaction between the protein sample and a dye, Coomassie Brilliant Blue G-250, which allows researchers to quantify the amount of protein in their samples. The assay is rapid, simple, and compatible with various experimental conditions.
The unifying aspect of the Bradford Assay lies in its ability to provide a common method for scientists from diverse research backgrounds to measure protein concentrations in their experiments. This standardized procedure is crucial for maintaining accuracy and comparability of results across different studies. Furthermore, the Bradford Assay is applicable to a broad range of research areas, such as molecular biology, cell biology, and biotechnology, fostering a sense of unity among researchers in these fields.
In conclusion, the Bradford Assay serves as a unifying theme in biochemistry by offering a reliable and widely used method for protein quantification. It bridges the gap between various research areas, allowing scientists to effectively collaborate and build upon one another's work. The Bradford Assay is essential in maintaining consistency, accuracy, and reproducibility of protein measurements across studies, thus contributing to the advancement of scientific knowledge.
learn more about Bradford Assay here
brainly.com/question/30215297
#SPJ4
Im a titration of a weak acid with a strong base, what is the pH of the solution at the equivalent point?
A >7
B 7
C <7
D 0
Answer:
C
Explanation:
Use the table to answer Questions 3-4.
3. The correct statement for the data shown is The population is evolving. The correct option to this question is D. 4. Migration will change the frequency of both the allele. The correct option to this question is C.
How can allele frequency tell you if a population is evolving?Scientists can track the frequency of alleles in populations through time to better understand how organisms change. Scientists can conclude that if they differ from generation to generation, the population is not in Hardy-Weinberg equilibrium and is therefore changing.Because a genetic population is defined as the sum of gene (or allelic) frequencies for all the genes represented by that population, it follows that gene frequencies in that population must change for evolution to occur.Migration alters gene frequencies by introducing additional copies of an allele already present in the population or by introducing a new allele created by mutation. Because mutations do not occur equally in all populations.For more information on allele kindly visit to
https://brainly.com/question/14206531
#SPJ1
If a reaction is endothermic, then the equilibrium constant is higher at higher temperature.
A) True
B) False
A) True. For an endothermic reaction, heat is treated as a reactant, and increasing the temperature of the system will shift the equilibrium towards the products to counteract the increase in heat.
As a result, the equilibrium constant will be higher at higher temperatures, as the reaction will favor the products more strongly.
The equilibrium constant (K) is a measure of the extent to which a chemical reaction proceeds to form products, and is defined as the ratio of the concentrations of products to reactants at equilibrium. For a reaction at constant temperature, the value of K is constant and depends only on the nature of the reactants and products involved.
For an endothermic reaction, the reaction absorbs heat, which is treated as a reactant. According to Le Chatelier's principle, when a system at equilibrium is subjected to a change in temperature, pressure, or concentration, the system will shift to counteract the change and establish a new equilibrium state. In the case of an endothermic reaction, increasing the temperature of the system will cause the equilibrium to shift towards the products, as the reaction will favor the formation of products to counteract the increase in heat.
As a result, the equilibrium constant for an endothermic reaction is higher at higher temperatures, as the reaction will be more strongly shifted towards the products. Conversely, for an exothermic reaction, the equilibrium constant is higher at lower temperatures, as the reaction will favor the formation of products at lower temperatures to counteract the loss of heat.
To know more about equilibrium
brainly.com/question/30694482
#SPJ11
if you radioactively labelled nadh and fadh2, you would observe that the radioactivity would be transported at the
NADH and FADH2 are two important molecules used by the electron transport chain to transfer electrons from one molecule to another.
What is molecules ?Molecules are the smallest unit of a substance that still retains the chemical and physical properties of the original material. A molecule is made up of two or more atoms that are held together by chemical bonds. Molecules can be composed of any combination of elements, such as carbon, hydrogen, oxygen, nitrogen, and others. Molecules can be both simple, with just two atoms, or complex, with thousands of atoms forming a single molecule. Molecules can be found in everything from the air we breathe to the food we eat. Molecules are the building blocks of life, and understanding the structure and properties of molecules helps scientists gain insight into the natural world.
To learn more about molecules
https://brainly.com/question/26556885
#SPJ4
HELP! 10 pts!! || Which does NOT describe a water molecule?
Group of answer choices
The molecule has a bent shape.
The molecule is an ionic compound.
The molecule dissolves most polar solutes.
The oxygen end of the molecule has a slightly negative charge
Answer is down below!
Explanation:
Answer and Explanation: The following is not true about water molecules: c) Water molecules form ionic bonds. Rather, water molecules form hydrogen bonds with each other due to their polarity. Water is a polar molecule, which means it has a charge difference on either end.
Why would the side product of 4 hydroxy-4 methyl-2-pentanone form in the synthesis of dibenzalacetone?
The side product of 4 hydroxy-4 methyl-2-pentanone, which is also known as a hemiacetal, forms in the synthesis of dibenzalacetone due to the reaction between the hydroxy group on one molecule of benzaldehyde and the carbonyl group on the 4 hydroxy-4 methyl-2-pentanone molecule.
This reaction results in the formation of an intermediate hemiacetal, which can then undergo a dehydration reaction to form dibenzalacetone. However, if the dehydration reaction does not occur efficiently, the hemiacetal may remain as a side product.
The formation of 4-hydroxy-4-methyl-2-pentanone as a side product in the synthesis of dibenzalacetone occurs due to an aldol condensation reaction. During the synthesis, benzaldehyde reacts with acetone to form dibenzalacetone. However, if acetone reacts with itself (instead of benzaldehyde), it undergoes an aldol condensation to produce 4-hydroxy-4-methyl-2-pentanone. This side reaction competes with the formation of dibenzalacetone, leading to the presence of 4-hydroxy-4-methyl-2-pentanone as a side product.
To know more about hydroxy click here .
brainly.com/question/31590874
#SPJ11
What is the formula for the ionic compound containing iron (III) ions and iodide ions?A) FeI B) Fe2I C) FeI2 D) FeI3 E) Fe3I
The formula for the ionic compound containing iron (III) ions and iodide ions is FeI3. The correct answer is option D.
This can be determined by understanding the valency of both iron and iodide ions. Iron has a valency of +3, which means that it can form ionic bonds with three negatively charged ions. Iodide ions, on the other hand, have a valency of -1, which means that they can bond with positively charged ions with a valency of +1.
To form a stable compound, three iodide ions are needed to balance the charge of one iron (III) ion, which has a charge of +3. Therefore, the formula for the ionic compound is FeI3, which means that there are three iodide ions for every one iron (III) ion.
It is important to note that the subscript after each element represents the number of atoms of that element in the compound. In this case, there is one iron (III) ion and three iodide ions, which is why the formula is FeI3. Knowing the valencies of the elements involved can help in determining the correct formula for an ionic compound.
Therefore, option D is correct.
For more such questions on ionic compound, click on:
https://brainly.com/question/2687188
#SPJ11
What is the coefficient of H2SO4 when the following equation is properly balanced?___ Ca3(PO4)2 + ___ H2SO4 ® ___ CaSO4 + ___ H3PO4A) 3 B) 8 C) 10 D) 11 E) none of these
The coefficient of H2SO4 in the balanced equation is 8, and the answer is B) 8.
To balance the given equation:
Ca3(PO4)2 + H2SO4 → CaSO4 + H3PO4
We need to ensure that the number of atoms of each element is the same on both sides of the equation.
First, we can balance the phosphorus and calcium atoms by placing a coefficient of 3 in front of Ca3(PO4)2:
3Ca3(PO4)2 + H2SO4 → CaSO4 + H3PO4
Now, there are 9 oxygen atoms on the left side and only 5 on the right side. To balance the oxygen atoms, we can add a coefficient of 8 in front of H2SO4:
3Ca3(PO4)2 + 8H2SO4 → CaSO4 + H3PO4
Finally, we can balance the hydrogen atoms by placing a coefficient of 2 in front of H3PO4:
3Ca3(PO4)2 + 8H2SO4 → CaSO4 + 2H3PO4.
For such more questions on H2SO4:
https://brainly.com/question/30356536
#SPJ11
Question 26 Marks: 1 Vent gases combined with high moisture inside a chimney will formChoose one answer. a. a glass-like glaze b. hydrochloric acid c. sodium chloride d. sulfuric acid
Vent gases combined with high moisture inside a chimney will form sulfuric acid (option D).
This is because the vent gases typically contain sulfur dioxide (SO2), which reacts with water (H2O) to form sulfuric acid (H2SO4) through a series of intermediate reactions.
The reaction pathway involves the formation of sulfurous acid (H2SO3) and bisulfite ions (HSO3-) as intermediates, which then react further with oxygen and water to ultimately form sulfuric acid. The presence of high moisture levels in the chimney facilitates these reactions by providing the necessary water molecules.
Sulfuric acid is a highly corrosive and dangerous acid, which can cause severe damage to the chimney, as well as to any surrounding structures or materials. It can also be harmful to human health, particularly when inhaled as a gas or in the form of fine droplets or aerosols. Therefore, it is important to prevent the formation of sulfuric acid by controlling the moisture levels and venting the gases properly.
For such more questions on Sulfuric acid:
https://brainly.com/question/10220770
#SPJ11
Question 5
A secchi disk is used to determine:
a. pH
b. clarity in recreational waters
c. coli form contamination
d. heavy metals
A secchi disk is used to determine the b. clarity in recreational waters.
The secchi disk is a circular, flat plate with alternating black and white quadrants, typically measuring 20-30 cm in diameter. It is attached to a rope or measuring tape and lowered into the water until it is no longer visible. The depth at which the disk disappears from sight is recorded as the secchi depth, which is an indicator of water transparency or clarity. The clarity of water is affected by factors such as the presence of algae, suspended particles, and dissolved organic matter.
It is an essential parameter for assessing the health of aquatic ecosystems, as high clarity is generally indicative of good water quality, while low clarity can be a sign of pollution or other environmental issues. The secchi disk does not measure pH, coliform contamination, or heavy metals directly, but the clarity of the water can provide indirect information about the presence of these factors. A secchi disk is used to determine the b. clarity in recreational waters.
learn more about aquatic ecosystems here:
https://brainly.com/question/30791419
#SPJ11
Suppose that Experiment 2 is repeated using chloride salts of the Group 1 metals. Compared with the concentration of Clâ in the 10 mM Mg2+ solution, the concentration of Clâ in the 5 mM Na+ solution would be:A.higherB.the sameC.2 times lower.D.4 times lower.
Compared with the concentration of Clâ in the 10 mM Mg2+ solution, the concentration of Clâ in the 5 mM Na+ solution would be 4 times lower.
To answer it, let's discuss the concentration of Cl- ions in the solutions containing Group 1 metals and compare it to the Mg2+ solution.
In the 10 mM Mg2+ solution, the concentration of Cl- ions would be 20 mM, as one magnesium ion (Mg2+) requires two chloride ions (Cl-) to form a neutral compound (MgCl2).
Now, let's look at the 5 mM Na+ solution. Since sodium (Na+) and chloride (Cl-) ions have a 1:1 ratio in forming a neutral compound (NaCl), the concentration of Cl- ions in this solution would also be 5 mM.
Comparing the Cl- ion concentrations, we can conclude that the concentration of Cl- in the 5 mM Na+ solution is:
20 mM (Mg2+ solution) / 5 mM (Na+ solution) = 4 times lower.
So, the correct answer is D. 4 times lower.
To learn more about concentration, refer:-
https://brainly.com/question/10725862
#SPJ11
Why vinyl and aryl halides don't undergo SN1?
Vinyl and aryl halides do not undergo SN1 reactions due to the unique nature of their molecular structures and the stability of their intermediate carbocations. SN1 reactions involve a two-step mechanism that first forms a carbocation intermediate and then undergoes nucleophilic attack.
In vinyl halides, the halogen atom is directly attached to a carbon-carbon double bond (alkene). This structure results in a high degree of electron density around the double bond, which prevents the formation of a stable carbocation intermediate necessary for SN1 reactions. Moreover, the sp2 hybridization of the carbon atom in vinyl halides further reduces the likelihood of a carbocation being formed.
Similarly, aryl halides have a halogen atom attached to an aromatic ring. The resonance stabilization in the aromatic ring contributes to the overall stability of the molecule, and the formation of a carbocation intermediate would disrupt this stabilization. Additionally, the partial double bond character in the carbon-halogen bond of aryl halides due to resonance makes it difficult for the bond to break in the first step of the SN1 reaction.
In summary, vinyl and aryl halides do not undergo SN1 reactions because their molecular structures prevent the formation of stable carbocation intermediates, which are necessary for the reaction to proceed. The electron density and resonance stabilization in these compounds is key factors contributing to this behavior.
learn more about SN1 reactions here: brainly.com/question/18503359
#SPJ11
A balloon with 0.48 moles of gas rises from sea level to the upper atmosphere (0.5 atm, 2oC). What is the volume of the balloon?
The volume of the balloon is 6.24 L. The random motion of the gas particles is consistent with Newton's Laws of Motion.
What is the explanation of the ideal gas law?the rule that states that the sum of the absolute temperature of the gas and the universal gas constant is equal to the product of the pressure and volume of a single gram of an ideal gas.
We can use the ideal gas law,
PV = nRT
P = pressure
V = volume
n = number of moles
R = gas constant
T = temperature
Now, we have to convert the temperature to Kelvin:
T = 2 + 273.15 = 275.15 K
We can substitute the values,
P = 0.5 atm
n = 0.48 mol
R = 0.08206 L·atm/(mol·K)
T = 275.15 K
PV = nRT
V = (nRT)/P
V = (0.48 mol * 0.08206 L·atm/(mol·K) * 275.15 K) / 0.5 atm
V = 6.24 L
To know more about the ideal gas law visit:
brainly.com/question/27870704
#SPJ1
Which chemical would one use in a cold pack?
NH4NO3 OR CaCl2
Both NH4NO3 and CaCl2 can be used in cold packs. NH4NO3 is often used in instant cold packs,
where the chemical is dissolved in water to create a cold sensation. CaCl2 is used in reusable cold packs, where the chemical is frozen and then placed in a fabric or plastic pack to provide a cold sensation. The choice of chemical depends on the specific application and desired duration of the cold pack.the instructions: To make a cold pack, you can dissolve ammonium nitrate in water. The process of dissolving this ionic solid in water is endothermic, which means that it absorbs energy from its surroundings as the dissolution occurs
To know more about cold packs. please click:-
https://brainly.com/question/14370354
#SPJ11
During the last “Polar Vortex” I was stuck late at school in another boring meeting. At 7:00 pm I finally got to my car, finding, disastrously, that it wouldn’t start. I was forced to take the bus home, and knew I would be waiting a while to transfer at Clark St. Luckily, at My High School, there was a closet full of chemicals. What could I have done in order to warm up my hands? Why would this work?
This Is A Question, Not a Real Life Scenario
Answer: no answer
Explanation:
I don't know
If an equilibrium for a reaction is said to lie to the right then the equilibrium constant
A) is a negative value.
B) is a positive value less than one.
C) is a positive value greater than one.
D) is equal to one.
Answer:
The Answer is C it My GuestHave a Nice Best Day : )
Solve for “x” in the following equations.
5. 14(87) = x(79) x=
6. 26x = 51(29) x=
7. 101.1 = x x =
35 205
Answer:
5. x = 1218/79 or 15.4 (rounded)
6. x = 1429/26 or 56.9 (rounded)
How many moles of NO2 are in a flask with a volume of 28L at a pressure of 121 kPa and a temperature of 45C?
Total, 13.3 moles of NO₂ in the flask with a volume of 28L.
We can use the ideal gas law to determine how many moles of NO₂ are in the flask;
PV = nRT
where P will be the pressure, V will be the volume, n is number of moles, R is gas constant, and T is the temperature in Kelvin.
First, we need to convert the temperature from Celsius to Kelvin;
T(K) = T(°C) + 273.15
T(K) = 45°C + 273.15
T(K) = 318.15 K
Next, we can put in the values we have;
n = (PV) / (RT)
n = (121 kPa × 28 L) / (8.314 J/(mol×K) × 318.15 K)
n ≈ 13.3 mol
To know more about ideal gas law here
https://brainly.com/question/4147359
#SPJ4
Why don't vinyl or aryl halides undergo Sn1?
Vinyl and aryl halides do not undergo Sn1 reactions because the carbon-carbon double bond in vinyl halides or the aromatic ring in aryl halides do not allow for the formation of a stable carbocation intermediate.
In an Sn1 reaction, the leaving group first leaves, generating a carbocation intermediate, which is then attacked by a nucleophile. However, in vinyl and aryl halides, the carbocation intermediate formed would be very unstable due to the electron-withdrawing nature of the double bond or aromatic ring. As a result, these compounds typically undergo Sn2 reactions instead.
To know more about carbocation intermediate click here:
https://brainly.com/question/29817584
#SPJ11
Calculate the mass of 4.50 moles of Ca3PO4A) 215 g B) 968 g C) 0.0209 g D) 87.1 g E) 392 g
The correct answer is D) 87.1 g.
Explanation: The molar mass of Ca3PO4 is 310.18 g/mol (calcium: 3 x 40.08 g/mol, phosphorus: 1 x 30.97 g/mol, oxygen: 12 x 16.00 g/mol). To find the mass of 4.50 moles, we can use the formula:
mass = moles x molar mass
mass = 4.50 mol x 310.18 g/mol
mass = 1395.81 g
Rounding to the correct number of significant figures gives us the answer of 87.1 g.
In summary, we used the molar mass of Ca3PO4 to convert the number of moles given to the corresponding mass using the formula mass = moles x molar mass. The result was rounded to the correct number of significant figures.
Learn more about molar mass here:
https://brainly.com/question/22997914
#SPJ11