Answer:
As the amplitude of the sound wave increases, the intensity of the sound increases. Sounds with higher intensities are perceived to be louder. Relative sound intensities are often given in units named decibels (dB).
Explanation:
Temperature Change Curing Phase Change (5 pts)
Water boils at 100 °C. You boil a pot containing 500 g of water for 10 minutes.
What is the temperature of the water after 10 minutes of constant boiling? (Hint this question does not require any math).
Explain your answer by discussing heat and state change.
Answer:
since water boil at 100 °C .so 500gof water Will still boil at 100 °C
How many moles of MgCl2 where needed to make a 650.0 mL solution a concentration of 0.962 M?
Answer:
0.625 moles MgCl₂
Explanation:
Since you were given a molarity value and volume, you should use the molarity equation to find moles. The equation looks like this:
Molarity (M) = moles / volume (L)
To find moles, you need to (1) convert mL to L (by dividing by 1,000) and then (2) plug the numbers into the formula and simplify to find moles. The final answer should have 3 sig figs as the lowest amount of sig figs in a given value is 3.
Step 1:
650.0 mL / 1,000 = 0.6500 L
Step 2:
Molarity = moles / volume
0.962 M = moles / 0.6500 L
(0.962 M) x (0.6500 L) = moles
0.625 = moles
2.70 L of a gas has a pressure of 0.63 atm. What is the volume of the gas at 105kPa?
[tex]\huge{\green}\fcolorbox{blue}{black}{\bf{\underline{\red{\color{brown}Answer}}}}[/tex]
4.44l
Explanation:
[tex] \sf Volume \: of \: gas \: before(V_1) = 2.7 \: l \\ \sf Pressure \: of \: gas \: before(P_1) = 0.63 \: atm \\ \sf 0.63 \times 101.3 = 63.8 \: kPa \\ \sf Volume \: of \: gas \: after(V_2) = ? \\ \sf Pressure \: of \: gas \: after( P_2) = 105 \: kPa[/tex]
[tex] \textsf{ By using Boyle's law} \\ \\ \tt{ \frac{P_1}{V_1} = \frac{P_2}{V_2} }[/tex]
[tex] \sf \longrightarrow \frac{2.70}{63.8} = \frac{V_2}{105} \\ \\ \\ \sf \longrightarrow \frac{2.7 \times 105}{63.8} = V_2 \\ \\ \\ \sf \longrightarrow \frac{283.5}{63.8} = V_2 \\ \\ \\ {\orange {\boxed{ \longrightarrow 4.44 \: l = V_2}}}[/tex]
How many moles of water (H2O) does 10.82 x 1023 molecules represent? Round your answer to the hundredths place.
No of moles
[tex]\\ \rm\Rrightarrow \dfrac{No\:of\: molecules}{Avagadro\:no}[/tex]
[tex]\\ \rm\Rrightarrow \dfrac{10.82\times 10^{23}}{6.023\times 10^{23}}[/tex]
[tex]\\ \rm\Rrightarrow 1.80mol[/tex]
So
[tex]\boxed{\sf No\:of\: molecules=No\:of\:moles\times Avagadro\:no}[/tex]
[tex]\\ \tt{:}\longrightarrow 10.82\times 10^{23}=n\times 6.023\times 10^{23}[/tex]
[tex]\\ \tt{:}\longrightarrow n=\dfrac{10.82}{6.023}[/tex]
[tex]\\ \tt{:}\longrightarrow n=1.8mol[/tex]
How many grams of CO2 are produced if 2.09 moles of hydrochloric acid are reacted with
calcium carbonate?
Answer:
The molar mass of CO2 = 44.01 g/mol
Explanation:
Start with 2.09 moles of HCl and convert to moles of CO2 For every 2 moles of HCl used, 1 mole of CO2 is formed.
2.09 mol HCl •(1 mol CO2/2 mol HCl) = 1.045 mol CO2
Now convert moles of CO2 to grams using the molar mass.
1.045 mol CO2 • 44.01 g/mol = 45.99 grams CO2
3 significant figures = 46.0 grams CO2
Hope This Helped
Analyze the word problem and match the vocabulary terms to the chemicals in the word problem.
5.00 grams of solid citric acid is dissolved in 500.00 ml of water to make aqueous citric acid
5.00 grams of solid citric acid (solute) is dissolved in 500.00 ml of water (solvent) to make aqueous citric acid (solution).
What is a solution?A solution is a homogeneous mixture prepared by dissolving a solute in a solvent.
5.00 grams of solid citric acid is dissolved in 500.00 ml of water to make aqueous citric acid.
In this example:
5.00 grams of solid citric acid is the solute (what is dissolved).500.00 ml of water is the solvent (the media in which the solute is dissolved).Aqueous citric acid is the resulting solution.5.00 grams of solid citric acid (solute) is dissolved in 500.00 ml of water (solvent) to make aqueous citric acid (solution).
Learn more about solutions here: https://brainly.com/question/25326161
#SPJ1
Which is an unreliable source?
A scientist who studies dinosaurs presents her research on velociraptors at a science convention.
An advertisement for acne medication claims it can clear up acne in less than one week.
An article on the Centers for Disease Control and Prevention (CDC) website discusses the salmonella bacteria.
A chemistry teacher discusses possible projects for the upcoming science fair.
The source that is unreliable is an advertisement for acne medication claims it can clear up acne in less than one week.
What are citable sources?Citable sources are those sources that are gotten from places that are proven to be of good standards and not from mere claims such as:
Science journalsprofessional organizationsgovernment agenciesTherefore, the source that is unreliable is an advertisement for acne medication claims it can clear up acne in less than one week.
Learn more about citations here:
https://brainly.com/question/8130130
#SPJ1
- If x moles of electrons are transferred when 4.8 g of oxygen reacts with 4.8 g of
magnesium, what is the value of x?
Answer:
sdfffffffff
Explanation:
dfffffgsdsdsdsdsdsdsdsdsdsdsdsdsdsdsd
The "iodine clock reaction" is a popular chemical demonstration. As part of that demonstration, the I−3 ion is generated in the reaction
S2O2−8(aq)+3I−(aq)⟶2SO2−4(aq)+I−3(aq)
In one trial, the unique rate of reaction was 6.93 μmol⋅L−1⋅s−1. What was the rate of reaction of iodide ions?
1. Initial Rate = _______ μmol⋅L−1⋅s−1 ??????
What was the rate of formation of sulfate ions?
2. Rate of formation = _______ μmol⋅L−1⋅s−1 ??????
In one trial, the unique rate of reaction was 6.93 μmol⋅L−1⋅s−1, the initial rate is 17.4 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex] and rate of formation of sulfate ions was 11.6 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
What is the rate of recation?Reaction rate, in chemistry, is the speed at which a chemical reaction proceeds.
[tex](S_2O_8)^-^2 (aq) + 3 I^-(aq)[/tex] → [tex]2 S0_4^-^2 (aq) + 3I^- (aq)[/tex]
Rate of the reaction = -Δ [[tex]S_20_8^-^2[/tex]] /Δ t = -1/3 Δ [[tex]I^-[/tex]] /Δ t
5.8 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex] = -1/3 Δ [[tex]I^-[/tex]] /Δ t
-Δ [[tex]I^-[/tex]] /Δ t =17.4 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
So the rate of reaction of iodide ion =17.4 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
+1/2Δ [[tex]S0_4^-^2[/tex]] /Δ t = rate of reaction
+1/2Δ [[tex]S0_4^-^2[/tex]] /Δ t = 5.8 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
+ Δ [[tex]S0_4^-^2[/tex]] /Δ t = 5.8 X 2 = 11.6 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
Rate of formation of sulfate ions=11.6 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
Hence, the initial rate is 17.4 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex] and rate of formation of sulfate ions was 11.6 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
Learn more about the rate of reaction here:
https://brainly.com/question/13228022
#SPJ1
What is the pH of a 0.034 M
solution hydroiodic acid (HI)?
pH = [?]
Answer:
1.47
Explanation:
acellus
How much energy is wasted by a 10% efficient filament bulb with 5 J of input?
Answer:
4.5 J wasted
Explanation:
10 % efficient means 90% wasted
90% of 5 J = .9 *5 = 4.5 J
describe a weather station that will be used to collect weather data it should collect data that are needed to make forecasts. explain what data are needed how the station would be powered and any other relevant information . Then sketch it out
(please draw a sketch arigato)
The weather station is a place which contain instrument that collect data of atmospheric pressure, wind, humidity, etc to forecast weather. The weather station is powered by solar power.
What is a weather station?A weather station is a place that measure atmospheric conditions, on the basis of temp., pressure, wind speed, etc conditions.
They can be based either in land or sea. They are necessary to forecast any disaster, so we can prepare for the disaster.
Thus, the weather station is a place which contain instrument that collect data of atmospheric pressure, wind, humidity, etc to forecast weather. The weather station is powered by solar power.
Learn more about weather station
https://brainly.com/question/26164593
#SPJ1
Which statement best describes the role of oxygen in cellular respiration?
OA. Oxygen molecules are a waste product of electron flow.
B. Oxygen molecules form as ATP molecules are made.
OC. Oxygen molecules form as sugar molecules are broken down.
OD. Oxygen molecules are used to make water molecules.
The role of oxygen in cellular respiration is to make water molecules. hence, option (D) is correct.
What is Cellular respiration ?
Cellular respiration is the process in which cells break down molecules for energy.
The cells use oxygen to break down food in the form of glucose to produce water and release carbon dioxide.
During aerobic cellular respiration, glucose reacts with oxygen, forming ATP that can be used by the cell. Carbon dioxide and water are created as byproducts.
In this reaction, energy is produced in the form of ATP that is used by the cell for its various activities.
Thus the correct answer is option D.
Learn more about respiration here ;
https://brainly.com/question/12605249
#SPJ1
When water, oxygen, and iron
combine, what is produced?
A. rust
B. carbon
C. carbon dioxide
D. carbon monoxide
Answer:
When we combine oxygen, and iron rust is produce.
Explanation:
The iron reacts with water and oxygen to form hydrated iron(III) oxide, which we see as rust. Iron and steel rust when they come into contact with water and oxygen – both are needed for rusting to occur.
ASAP 100 POINTS Which molecules carries instructions for inherited traits
A.DNA
B CARbohydrate
C.Protein
D.Lipid
Answer:
A.DNA
Explanation:
Ahaa Its gona be right
Answer:
D.N.A.
Explanation:
Hi student! Let me help you out on this question.
D.N.A. is the molecule which carries instructions for inherited traits.
[tex]\therefore,Option\quad A \quad is \quad correct[/tex]
Hope that this helped! have a good day ahead.
Please show steps Thanks
Answer:
2.5M
Explanation:
First calculate the gram-formula mass of CaCO3 (add up the mass of each element in the compound)
40.1 + 12.01 + 16(3) = 100.11
Now use the mole calculation equation on Table T and plug in the numbers
(Keep in mind that 25 is the given mass)
25/100.11 = 2.497 or 2.5M
of an investigation, students were asked to prepare a sodium hydroxide solution of a certain molarity. The students were given a
of procedures. Which procedure will result in 750 mL of 1.5 M NaOH solution?
issolving 1.13 g of NaOH in enough water to make up to 750 mL of solution
ssolving 45 g of NaOH in enough water to make up to 750 mL of solution
ssolving 40 g of NaOH in 1 L of water
solving 1.13 g of NaOH in 0.750 L of water
The correct procedure is:
Dissolving 45 g of NaOH in enough water to make up to 750 mL of solution
What is molarity?This is defined as the mole of solute per unit litre of solution. Mathematically, it can be expressed as:
Molarity = mole / Volume
How to determine the mole of NaOH Volume = 750 mL = 750 / 1000 = 0.75 L Molarity = 1.5 MMole of NaOH =?Mole = Molarity x Volume
Mole of NaOH = 1.5 × 0.75
Mole of NaOH = 1.125 mole
How to determine the mass of NaOH Mole of NaOH = 1.125 moleMolar mass of NaOH = 40 g/mol Mass of NaOH =?Mass = mole × molar mass
Mass of NaOH = 1.125 × 40
Mass of NaOH = 45 g
Thus, to obtain 750 mL of 1.5 M NaOH solution, 45 g of NaOH will be dissolved in enough water to make up to 750 mL of solution
Learn more about molarity:
https://brainly.com/question/15370276
#SPJ1
Why do you think it is
important to group substances and mixtures based on their classifications or uses?
The purpose of classification is to identify objects with common or similar properties.
What is a mixture?A mixture is composed of one or more pure substances in varying compositions.
It's important for scientists to know the properties of matter because all things are made up of matter.
Each type of matter has different physical characteristics and scientists need to know and understand these characteristics to make calculations.
The main phases of matter are solid liquid and gas.
Hence, the purpose of classification is to identify objects with common or similar properties.
Learn more about the mixture here:
https://brainly.com/question/24898889
#SPJ1
Convert 7.50 mol of Li₂O to grams
Answer:
223.5 g
Explanation:
The formula between the number of moles, mass and Mr can be used to convert moles to grams.
Number of moles = mass ÷ Mr
So, mass = number of moles × Mr
Mr of Li₂O = (6.9 × 2) + 16 = 29.8
∴ Mass = 7.5 × 29.8 = 223.5 g
Find the pressure in mm HG produced by 2.35 g of carbon dioxide in a 5.00 L flask at 18 C?
Answer:
194 mm Hg or 193.8mm Hg
Explanation:
273+18=291 K
2.35g /44
=0.0534 moles
P=0.0534 mol×0.082×29 / 5L
=0.2548 atm
0.255 × 760
=193.8 mmHg
Which statement best describes what makes a base weak
The statement that describes what makes a base weak is that the base will be unable to dissociate completely in water.
What is a base?A base is any of a class of generally water-soluble compounds, having bitter taste, that turn red litmus blue, and react with acids to form salts.
Bases usually dissociate into hydroxide ions (OH-) when in an aqueous solution.
However, a base is termed weak or strong depending on it's ability to dissociate completely. A weak base does not dissociate completely into hydroxide ions when in an aqueous solution.
Learn more about bases at: https://brainly.com/question/23687757
#SPJ1
What is the mass number of a single atom of magnesium-25?
Answer: It is approximately 24.985837
3) Convert 0.987 moles of Lithium to grams.
Answer:
6.850767 grams is the answer
[tex]0.987 ~ \text{moles of Li} = 0.987 \times \text{Molar mass of Li}\\\\~~~~~~~~~~~~~~~~~~~~~~~=0.987 \times 6.941~ g\\\\~~~~~~~~~~~~~~~~~~~~~~~=6.850767~ g[/tex]
A certain atom has 22 protons and 19 electrons. This atom loses an electron. The net charge on the atom is now 4+. If this same atom with 22 protons and 19 electrons were to gain 3 electrons, the net charge on the atom would be
Answer: 0
Explanation:
If 3 electrons were to be gained, then the number of protons would equal the number of electrons.
What is the density of helium at 0.975 atm and 27.0 C?
Answer:
0.158g/L.
Explanation:
MM of helium gas or He =4 g/mol
P = 0.974 atm
T = 27 °C, but we need absolute temperature.
TK = TC + 273
T = 27 + 273 = 300 K
m/V = (4 g/mol · 0.975 atm) / (0.0821 L·atm/mol·K · 300 K)
m/V = 0.975/6.1575 g/L
m/V = 0.158g/L
Answer: The density of the helium is 0.158g/L.
How many grams do 6.534e+24 molecules of phosphoric acid weigh?
Answer:
1,063 grams H₃PO₄
Explanation:
To find the mass of phosphoric acid (H₃PO₄), you should (1) convert molecules to moles (via Avogadro's number) and then (2) convert moles to grams (via molar mass from periodic table).
Molar Mass (H₃PO₄): 3(1.008 g/mol) + 30.974 g/mol + 4(15.998 g/mol)
Molar Mas (H₃PO₄): 97.99 g/mol
6.534 x 10²⁴ molecules H₃PO₄ 1 mole 97.99 g
--------------------------------------------- x ------------------------------------- x --------------
6.022 x 10²³ molecules 1 mole
= 1,063 grams H₃PO₄
show the step by step hybridization of hydroxonium ion H3O, draw the diagram showing the geometry and the bond angle
The central oxygen atom is a state of sp3 hybridization having only one available lone pair.
What is hybridization?The term hybridization refers to the mixing of two or more atomic orbitals to yield hybrid orbitals that are suitable for bonding.
Looking at the ion H3O^+, we can see that the central oxygen atom is a state of sp3 hybridization having only one available lone pair. The image of the ion is shown here.
Learn more about hybridization in ions:https://brainly.com/question/16556024
#SPJ1
Which phase has the lowest entropy?
O A. Aqueous
O B. Liquid
O C. Solid
O D. Gas
Answer:
Solid have the lowest entropy
Convert 26.02 x 1023 molecules of C2H8 to grams. Round your answer to the hundredths place.
No of molecules=26.02×10²³molecules
No of moles
26.02×10²³/6.023×10²³4.3molMolar mass
C2H82(12)+8(1)24+832g/molMass
Moles×Molar mass32(4.3)137.6g[tex]\\ \tt{:}\longrightarrow No\:of\:moles=\dfrac{Molecules}{Avagadro\:no}[/tex]
[tex]\\ \tt{:}\longrightarrow No\:of\:moles=\dfrac{26.02\times 10^{23}}{6.023\times 10^{23}}[/tex]
[tex]\\ \tt{:}\longrightarrow No\:of\:moles=4.32mol[/tex]
Molar mass of Ethane=32g/molWe need the mass
[tex]\\ \tt{:}\longrightarrow No\:of\:moles\times molar\:mass[/tex]
[tex]\\ \tt{:}\longrightarrow 32(4.32)[/tex]
[tex]\\ \tt{:}\longrightarrow 138.24g[/tex]
Consider the following representation of a reaction mechanism.
Step 1: A+ AC + E (slow)
Step 2: E+BA+ D (fast)
Overall reaction: A + B C + D
→>>
What should appear in the rate law for the reaction above?
O only A and B because they are reactants in the overall reaction
only C and C because they are products in the overall reaction
only A because it is the reactant in the rate-determining step
O only E and B because they are the reactants in the rate-determining step
The rate law depends on only A because it is the reactant in the rate-determining step.
What is the rate law;The rate law is a representation of the rate of reaction. The fast reaction is E+B ------> A+ D. The slow reaction is A + A ----->C + E. The overall reaction is A + B ------> C + D.
We know that the rate law depends only on the the slow reaction hence the rate law depends on only A because it is the reactant in the rate-determining step.
Learn more about the rate law:https://brainly.com/question/4222261
#SPJ1